.TH amttool 1 "(c) 2007 Gerd Hoffmann"
.SH NAME
amttool - remotely control Intel AMT managed machines.
.SH SYNOPSIS
.B amttool host [ command ]
.SH DESCRIPTION
.B amttool
is a perl script which speaks SOAP to Intel AMT managed machines.
It can query informations about the machine in question and also
send some commands for basic remote control.
.P
.B host
is the hostname or IP address of the machine amttool should
control.
.B command
is an optional command.
.P
You must set fill AMT_PASSWORD environment variable with the AMT
password.
.P
For more inforamtions on Intel AMT check amt-howto(7).
.SH COMMANDS
.TP
.B info
gather information (default).
.TP
.B reset
reset machine.
.TP
.B powerup
turn on machine.
.TP
.B powerdown
turn off machine.
.TP
.B powercycle
powercycle machine.
.TP
.B netinfo
print network configuration (requires AMT 2.5+).
.TP
.B netconf if link [ ip mask gw [ dns1 [ dns2 ]]]
configure network interface (requires AMT 2.5+).
.B if
is the interface handle,
.B link
the link policy.  If in doubt just feed in what the netinfo command
prints.
.B ip
is the IPv4 address,
.B mask
the netmask,
.B gw
the default gateway,
.B dns1
and
.B dns2
are the DNS Servers.  If no IP configuration is specified the tool
tries to configure the machine in shared mac address mode with dhcp,
otherwise in separate mac address mode with static IP address.
Default for dns1 is the gateway address, for dns2 it is 0.0.0.0.
.SH ENVIRONMENT
.TP
.B AMT_PASSWORD
AMT password.
.TP
.B AMT_DEBUG
Enable debug output.
.SH SEE ALSO
amtterm(1), gamt(1), amt-howto(7)
.SH AUTHOR
(c) 2007 Gerd Hoffmann <kraxel@redhat.com>