libjpeg: add needed files for libjpeg 90

Extracted from jpegsrc.v9a.tar.gz
(md5sum 3353992aecaee1805ef4109aadd433e7).

5 files changed, 3679 insertions, 0 deletions

diff --git a/jpeg/90/jinclude.h b/jpeg/90/jinclude.h
new file mode 100644
index 0000000..0a4f151
--- /dev/null
+++ b/jpeg/90/jinclude.h
@@ -0,0 +1,91 @@
+/*
+ * jinclude.h
+ *
+ * Copyright (C) 1991-1994, Thomas G. Lane.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file exists to provide a single place to fix any problems with
+ * including the wrong system include files.  (Common problems are taken
+ * care of by the standard jconfig symbols, but on really weird systems
+ * you may have to edit this file.)
+ *
+ * NOTE: this file is NOT intended to be included by applications using the
+ * JPEG library.  Most applications need only include jpeglib.h.
+ */
+
+
+/* Include auto-config file to find out which system include files we need. */
+
+#include "jconfig.h"		/* auto configuration options */
+#define JCONFIG_INCLUDED	/* so that jpeglib.h doesn't do it again */
+
+/*
+ * We need the NULL macro and size_t typedef.
+ * On an ANSI-conforming system it is sufficient to include <stddef.h>.
+ * Otherwise, we get them from <stdlib.h> or <stdio.h>; we may have to
+ * pull in <sys/types.h> as well.
+ * Note that the core JPEG library does not require <stdio.h>;
+ * only the default error handler and data source/destination modules do.
+ * But we must pull it in because of the references to FILE in jpeglib.h.
+ * You can remove those references if you want to compile without <stdio.h>.
+ */
+
+#ifdef HAVE_STDDEF_H
+#include <stddef.h>
+#endif
+
+#ifdef HAVE_STDLIB_H
+#include <stdlib.h>
+#endif
+
+#ifdef NEED_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+
+#include <stdio.h>
+
+/*
+ * We need memory copying and zeroing functions, plus strncpy().
+ * ANSI and System V implementations declare these in <string.h>.
+ * BSD doesn't have the mem() functions, but it does have bcopy()/bzero().
+ * Some systems may declare memset and memcpy in <memory.h>.
+ *
+ * NOTE: we assume the size parameters to these functions are of type size_t.
+ * Change the casts in these macros if not!
+ */
+
+#ifdef NEED_BSD_STRINGS
+
+#include <strings.h>
+#define MEMZERO(target,size)	bzero((void *)(target), (size_t)(size))
+#define MEMCOPY(dest,src,size)	bcopy((const void *)(src), (void *)(dest), (size_t)(size))
+
+#else /* not BSD, assume ANSI/SysV string lib */
+
+#include <string.h>
+#define MEMZERO(target,size)	memset((void *)(target), 0, (size_t)(size))
+#define MEMCOPY(dest,src,size)	memcpy((void *)(dest), (const void *)(src), (size_t)(size))
+
+#endif
+
+/*
+ * In ANSI C, and indeed any rational implementation, size_t is also the
+ * type returned by sizeof().  However, it seems there are some irrational
+ * implementations out there, in which sizeof() returns an int even though
+ * size_t is defined as long or unsigned long.  To ensure consistent results
+ * we always use this SIZEOF() macro in place of using sizeof() directly.
+ */
+
+#define SIZEOF(object)	((size_t) sizeof(object))
+
+/*
+ * The modules that use fread() and fwrite() always invoke them through
+ * these macros.  On some systems you may need to twiddle the argument casts.
+ * CAUTION: argument order is different from underlying functions!
+ */
+
+#define JFREAD(file,buf,sizeofbuf)  \
+  ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
+#define JFWRITE(file,buf,sizeofbuf)  \
+  ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file)))
diff --git a/jpeg/90/jpegint.h b/jpeg/90/jpegint.h
new file mode 100644
index 0000000..18bb887
--- /dev/null
+++ b/jpeg/90/jpegint.h
@@ -0,0 +1,426 @@
+/*
+ * jpegint.h
+ *
+ * Copyright (C) 1991-1997, Thomas G. Lane.
+ * Modified 1997-2013 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file provides common declarations for the various JPEG modules.
+ * These declarations are considered internal to the JPEG library; most
+ * applications using the library shouldn't need to include this file.
+ */
+
+
+/* Declarations for both compression & decompression */
+
+typedef enum {			/* Operating modes for buffer controllers */
+	JBUF_PASS_THRU,		/* Plain stripwise operation */
+	/* Remaining modes require a full-image buffer to have been created */
+	JBUF_SAVE_SOURCE,	/* Run source subobject only, save output */
+	JBUF_CRANK_DEST,	/* Run dest subobject only, using saved data */
+	JBUF_SAVE_AND_PASS	/* Run both subobjects, save output */
+} J_BUF_MODE;
+
+/* Values of global_state field (jdapi.c has some dependencies on ordering!) */
+#define CSTATE_START	100	/* after create_compress */
+#define CSTATE_SCANNING	101	/* start_compress done, write_scanlines OK */
+#define CSTATE_RAW_OK	102	/* start_compress done, write_raw_data OK */
+#define CSTATE_WRCOEFS	103	/* jpeg_write_coefficients done */
+#define DSTATE_START	200	/* after create_decompress */
+#define DSTATE_INHEADER	201	/* reading header markers, no SOS yet */
+#define DSTATE_READY	202	/* found SOS, ready for start_decompress */
+#define DSTATE_PRELOAD	203	/* reading multiscan file in start_decompress*/
+#define DSTATE_PRESCAN	204	/* performing dummy pass for 2-pass quant */
+#define DSTATE_SCANNING	205	/* start_decompress done, read_scanlines OK */
+#define DSTATE_RAW_OK	206	/* start_decompress done, read_raw_data OK */
+#define DSTATE_BUFIMAGE	207	/* expecting jpeg_start_output */
+#define DSTATE_BUFPOST	208	/* looking for SOS/EOI in jpeg_finish_output */
+#define DSTATE_RDCOEFS	209	/* reading file in jpeg_read_coefficients */
+#define DSTATE_STOPPING	210	/* looking for EOI in jpeg_finish_decompress */
+
+
+/* Declarations for compression modules */
+
+/* Master control module */
+struct jpeg_comp_master {
+  JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo));
+  JMETHOD(void, pass_startup, (j_compress_ptr cinfo));
+  JMETHOD(void, finish_pass, (j_compress_ptr cinfo));
+
+  /* State variables made visible to other modules */
+  boolean call_pass_startup;	/* True if pass_startup must be called */
+  boolean is_last_pass;		/* True during last pass */
+};
+
+/* Main buffer control (downsampled-data buffer) */
+struct jpeg_c_main_controller {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
+  JMETHOD(void, process_data, (j_compress_ptr cinfo,
+			       JSAMPARRAY input_buf, JDIMENSION *in_row_ctr,
+			       JDIMENSION in_rows_avail));
+};
+
+/* Compression preprocessing (downsampling input buffer control) */
+struct jpeg_c_prep_controller {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
+  JMETHOD(void, pre_process_data, (j_compress_ptr cinfo,
+				   JSAMPARRAY input_buf,
+				   JDIMENSION *in_row_ctr,
+				   JDIMENSION in_rows_avail,
+				   JSAMPIMAGE output_buf,
+				   JDIMENSION *out_row_group_ctr,
+				   JDIMENSION out_row_groups_avail));
+};
+
+/* Coefficient buffer control */
+struct jpeg_c_coef_controller {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode));
+  JMETHOD(boolean, compress_data, (j_compress_ptr cinfo,
+				   JSAMPIMAGE input_buf));
+};
+
+/* Colorspace conversion */
+struct jpeg_color_converter {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
+  JMETHOD(void, color_convert, (j_compress_ptr cinfo,
+				JSAMPARRAY input_buf, JSAMPIMAGE output_buf,
+				JDIMENSION output_row, int num_rows));
+};
+
+/* Downsampling */
+struct jpeg_downsampler {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
+  JMETHOD(void, downsample, (j_compress_ptr cinfo,
+			     JSAMPIMAGE input_buf, JDIMENSION in_row_index,
+			     JSAMPIMAGE output_buf,
+			     JDIMENSION out_row_group_index));
+
+  boolean need_context_rows;	/* TRUE if need rows above & below */
+};
+
+/* Forward DCT (also controls coefficient quantization) */
+typedef JMETHOD(void, forward_DCT_ptr,
+		(j_compress_ptr cinfo, jpeg_component_info * compptr,
+		 JSAMPARRAY sample_data, JBLOCKROW coef_blocks,
+		 JDIMENSION start_row, JDIMENSION start_col,
+		 JDIMENSION num_blocks));
+
+struct jpeg_forward_dct {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo));
+  /* It is useful to allow each component to have a separate FDCT method. */
+  forward_DCT_ptr forward_DCT[MAX_COMPONENTS];
+};
+
+/* Entropy encoding */
+struct jpeg_entropy_encoder {
+  JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics));
+  JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data));
+  JMETHOD(void, finish_pass, (j_compress_ptr cinfo));
+};
+
+/* Marker writing */
+struct jpeg_marker_writer {
+  JMETHOD(void, write_file_header, (j_compress_ptr cinfo));
+  JMETHOD(void, write_frame_header, (j_compress_ptr cinfo));
+  JMETHOD(void, write_scan_header, (j_compress_ptr cinfo));
+  JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo));
+  JMETHOD(void, write_tables_only, (j_compress_ptr cinfo));
+  /* These routines are exported to allow insertion of extra markers */
+  /* Probably only COM and APPn markers should be written this way */
+  JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker,
+				      unsigned int datalen));
+  JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val));
+};
+
+
+/* Declarations for decompression modules */
+
+/* Master control module */
+struct jpeg_decomp_master {
+  JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo));
+  JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo));
+
+  /* State variables made visible to other modules */
+  boolean is_dummy_pass;	/* True during 1st pass for 2-pass quant */
+};
+
+/* Input control module */
+struct jpeg_input_controller {
+  JMETHOD(int, consume_input, (j_decompress_ptr cinfo));
+  JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo));
+  JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo));
+  JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo));
+
+  /* State variables made visible to other modules */
+  boolean has_multiple_scans;	/* True if file has multiple scans */
+  boolean eoi_reached;		/* True when EOI has been consumed */
+};
+
+/* Main buffer control (downsampled-data buffer) */
+struct jpeg_d_main_controller {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode));
+  JMETHOD(void, process_data, (j_decompress_ptr cinfo,
+			       JSAMPARRAY output_buf, JDIMENSION *out_row_ctr,
+			       JDIMENSION out_rows_avail));
+};
+
+/* Coefficient buffer control */
+struct jpeg_d_coef_controller {
+  JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo));
+  JMETHOD(int, consume_data, (j_decompress_ptr cinfo));
+  JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo));
+  JMETHOD(int, decompress_data, (j_decompress_ptr cinfo,
+				 JSAMPIMAGE output_buf));
+  /* Pointer to array of coefficient virtual arrays, or NULL if none */
+  jvirt_barray_ptr *coef_arrays;
+};
+
+/* Decompression postprocessing (color quantization buffer control) */
+struct jpeg_d_post_controller {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode));
+  JMETHOD(void, post_process_data, (j_decompress_ptr cinfo,
+				    JSAMPIMAGE input_buf,
+				    JDIMENSION *in_row_group_ctr,
+				    JDIMENSION in_row_groups_avail,
+				    JSAMPARRAY output_buf,
+				    JDIMENSION *out_row_ctr,
+				    JDIMENSION out_rows_avail));
+};
+
+/* Marker reading & parsing */
+struct jpeg_marker_reader {
+  JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo));
+  /* Read markers until SOS or EOI.
+   * Returns same codes as are defined for jpeg_consume_input:
+   * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI.
+   */
+  JMETHOD(int, read_markers, (j_decompress_ptr cinfo));
+  /* Read a restart marker --- exported for use by entropy decoder only */
+  jpeg_marker_parser_method read_restart_marker;
+
+  /* State of marker reader --- nominally internal, but applications
+   * supplying COM or APPn handlers might like to know the state.
+   */
+  boolean saw_SOI;		/* found SOI? */
+  boolean saw_SOF;		/* found SOF? */
+  int next_restart_num;		/* next restart number expected (0-7) */
+  unsigned int discarded_bytes;	/* # of bytes skipped looking for a marker */
+};
+
+/* Entropy decoding */
+struct jpeg_entropy_decoder {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
+  JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, JBLOCKROW *MCU_data));
+  JMETHOD(void, finish_pass, (j_decompress_ptr cinfo));
+};
+
+/* Inverse DCT (also performs dequantization) */
+typedef JMETHOD(void, inverse_DCT_method_ptr,
+		(j_decompress_ptr cinfo, jpeg_component_info * compptr,
+		 JCOEFPTR coef_block,
+		 JSAMPARRAY output_buf, JDIMENSION output_col));
+
+struct jpeg_inverse_dct {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
+  /* It is useful to allow each component to have a separate IDCT method. */
+  inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS];
+};
+
+/* Upsampling (note that upsampler must also call color converter) */
+struct jpeg_upsampler {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
+  JMETHOD(void, upsample, (j_decompress_ptr cinfo,
+			   JSAMPIMAGE input_buf,
+			   JDIMENSION *in_row_group_ctr,
+			   JDIMENSION in_row_groups_avail,
+			   JSAMPARRAY output_buf,
+			   JDIMENSION *out_row_ctr,
+			   JDIMENSION out_rows_avail));
+
+  boolean need_context_rows;	/* TRUE if need rows above & below */
+};
+
+/* Colorspace conversion */
+struct jpeg_color_deconverter {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo));
+  JMETHOD(void, color_convert, (j_decompress_ptr cinfo,
+				JSAMPIMAGE input_buf, JDIMENSION input_row,
+				JSAMPARRAY output_buf, int num_rows));
+};
+
+/* Color quantization or color precision reduction */
+struct jpeg_color_quantizer {
+  JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan));
+  JMETHOD(void, color_quantize, (j_decompress_ptr cinfo,
+				 JSAMPARRAY input_buf, JSAMPARRAY output_buf,
+				 int num_rows));
+  JMETHOD(void, finish_pass, (j_decompress_ptr cinfo));
+  JMETHOD(void, new_color_map, (j_decompress_ptr cinfo));
+};
+
+
+/* Miscellaneous useful macros */
+
+#undef MAX
+#define MAX(a,b)	((a) > (b) ? (a) : (b))
+#undef MIN
+#define MIN(a,b)	((a) < (b) ? (a) : (b))
+
+
+/* We assume that right shift corresponds to signed division by 2 with
+ * rounding towards minus infinity.  This is correct for typical "arithmetic
+ * shift" instructions that shift in copies of the sign bit.  But some
+ * C compilers implement >> with an unsigned shift.  For these machines you
+ * must define RIGHT_SHIFT_IS_UNSIGNED.
+ * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity.
+ * It is only applied with constant shift counts.  SHIFT_TEMPS must be
+ * included in the variables of any routine using RIGHT_SHIFT.
+ */
+
+#ifdef RIGHT_SHIFT_IS_UNSIGNED
+#define SHIFT_TEMPS	INT32 shift_temp;
+#define RIGHT_SHIFT(x,shft)  \
+	((shift_temp = (x)) < 0 ? \
+	 (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \
+	 (shift_temp >> (shft)))
+#else
+#define SHIFT_TEMPS
+#define RIGHT_SHIFT(x,shft)	((x) >> (shft))
+#endif
+
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jinit_compress_master	jICompress
+#define jinit_c_master_control	jICMaster
+#define jinit_c_main_controller	jICMainC
+#define jinit_c_prep_controller	jICPrepC
+#define jinit_c_coef_controller	jICCoefC
+#define jinit_color_converter	jICColor
+#define jinit_downsampler	jIDownsampler
+#define jinit_forward_dct	jIFDCT
+#define jinit_huff_encoder	jIHEncoder
+#define jinit_arith_encoder	jIAEncoder
+#define jinit_marker_writer	jIMWriter
+#define jinit_master_decompress	jIDMaster
+#define jinit_d_main_controller	jIDMainC
+#define jinit_d_coef_controller	jIDCoefC
+#define jinit_d_post_controller	jIDPostC
+#define jinit_input_controller	jIInCtlr
+#define jinit_marker_reader	jIMReader
+#define jinit_huff_decoder	jIHDecoder
+#define jinit_arith_decoder	jIADecoder
+#define jinit_inverse_dct	jIIDCT
+#define jinit_upsampler		jIUpsampler
+#define jinit_color_deconverter	jIDColor
+#define jinit_1pass_quantizer	jI1Quant
+#define jinit_2pass_quantizer	jI2Quant
+#define jinit_merged_upsampler	jIMUpsampler
+#define jinit_memory_mgr	jIMemMgr
+#define jdiv_round_up		jDivRound
+#define jround_up		jRound
+#define jzero_far		jZeroFar
+#define jcopy_sample_rows	jCopySamples
+#define jcopy_block_row		jCopyBlocks
+#define jpeg_zigzag_order	jZIGTable
+#define jpeg_natural_order	jZAGTable
+#define jpeg_natural_order7	jZAG7Table
+#define jpeg_natural_order6	jZAG6Table
+#define jpeg_natural_order5	jZAG5Table
+#define jpeg_natural_order4	jZAG4Table
+#define jpeg_natural_order3	jZAG3Table
+#define jpeg_natural_order2	jZAG2Table
+#define jpeg_aritab		jAriTab
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+
+/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays
+ * and coefficient-block arrays.  This won't work on 80x86 because the arrays
+ * are FAR and we're assuming a small-pointer memory model.  However, some
+ * DOS compilers provide far-pointer versions of memcpy() and memset() even
+ * in the small-model libraries.  These will be used if USE_FMEM is defined.
+ * Otherwise, the routines in jutils.c do it the hard way.
+ */
+
+#ifndef NEED_FAR_POINTERS	/* normal case, same as regular macro */
+#define FMEMZERO(target,size)	MEMZERO(target,size)
+#else				/* 80x86 case */
+#ifdef USE_FMEM
+#define FMEMZERO(target,size)	_fmemset((void FAR *)(target), 0, (size_t)(size))
+#else
+EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero));
+#define FMEMZERO(target,size)	jzero_far(target, size)
+#endif
+#endif
+
+
+/* Compression module initialization routines */
+EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo,
+					 boolean transcode_only));
+EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo,
+					  boolean need_full_buffer));
+EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo,
+					  boolean need_full_buffer));
+EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo,
+					  boolean need_full_buffer));
+EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo));
+EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo));
+/* Decompression module initialization routines */
+EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo,
+					  boolean need_full_buffer));
+EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo,
+					  boolean need_full_buffer));
+EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo,
+					  boolean need_full_buffer));
+EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo));
+EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo));
+/* Memory manager initialization */
+EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo));
+
+/* Utility routines in jutils.c */
+EXTERN(long) jdiv_round_up JPP((long a, long b));
+EXTERN(long) jround_up JPP((long a, long b));
+EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row,
+				    JSAMPARRAY output_array, int dest_row,
+				    int num_rows, JDIMENSION num_cols));
+EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row,
+				  JDIMENSION num_blocks));
+/* Constant tables in jutils.c */
+#if 0				/* This table is not actually needed in v6a */
+extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */
+#endif
+extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */
+extern const int jpeg_natural_order7[]; /* zz to natural order for 7x7 block */
+extern const int jpeg_natural_order6[]; /* zz to natural order for 6x6 block */
+extern const int jpeg_natural_order5[]; /* zz to natural order for 5x5 block */
+extern const int jpeg_natural_order4[]; /* zz to natural order for 4x4 block */
+extern const int jpeg_natural_order3[]; /* zz to natural order for 3x3 block */
+extern const int jpeg_natural_order2[]; /* zz to natural order for 2x2 block */
+
+/* Arithmetic coding probability estimation tables in jaricom.c */
+extern const INT32 jpeg_aritab[];
+
+/* Suppress undefined-structure complaints if necessary. */
+
+#ifdef INCOMPLETE_TYPES_BROKEN
+#ifndef AM_MEMORY_MANAGER	/* only jmemmgr.c defines these */
+struct jvirt_sarray_control { long dummy; };
+struct jvirt_barray_control { long dummy; };
+#endif
+#endif /* INCOMPLETE_TYPES_BROKEN */
diff --git a/jpeg/90/jpeglib.h b/jpeg/90/jpeglib.h
new file mode 100644
index 0000000..f4fbf23
--- /dev/null
+++ b/jpeg/90/jpeglib.h
@@ -0,0 +1,1180 @@
+/*
+ * jpeglib.h
+ *
+ * Copyright (C) 1991-1998, Thomas G. Lane.
+ * Modified 2002-2013 by Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file defines the application interface for the JPEG library.
+ * Most applications using the library need only include this file,
+ * and perhaps jerror.h if they want to know the exact error codes.
+ */
+
+#ifndef JPEGLIB_H
+#define JPEGLIB_H
+
+/*
+ * First we include the configuration files that record how this
+ * installation of the JPEG library is set up.  jconfig.h can be
+ * generated automatically for many systems.  jmorecfg.h contains
+ * manual configuration options that most people need not worry about.
+ */
+
+#ifndef JCONFIG_INCLUDED	/* in case jinclude.h already did */
+#include "jconfig.h"		/* widely used configuration options */
+#endif
+#include "jmorecfg.h"		/* seldom changed options */
+
+
+#ifdef __cplusplus
+#ifndef DONT_USE_EXTERN_C
+extern "C" {
+#endif
+#endif
+
+/* Version IDs for the JPEG library.
+ * Might be useful for tests like "#if JPEG_LIB_VERSION >= 90".
+ */
+
+#define JPEG_LIB_VERSION        90	/* Compatibility version 9.0 */
+#define JPEG_LIB_VERSION_MAJOR  9
+#define JPEG_LIB_VERSION_MINOR  1
+
+
+/* Various constants determining the sizes of things.
+ * All of these are specified by the JPEG standard,
+ * so don't change them if you want to be compatible.
+ */
+
+#define DCTSIZE		    8	/* The basic DCT block is 8x8 coefficients */
+#define DCTSIZE2	    64	/* DCTSIZE squared; # of elements in a block */
+#define NUM_QUANT_TBLS      4	/* Quantization tables are numbered 0..3 */
+#define NUM_HUFF_TBLS       4	/* Huffman tables are numbered 0..3 */
+#define NUM_ARITH_TBLS      16	/* Arith-coding tables are numbered 0..15 */
+#define MAX_COMPS_IN_SCAN   4	/* JPEG limit on # of components in one scan */
+#define MAX_SAMP_FACTOR     4	/* JPEG limit on sampling factors */
+/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard;
+ * the PostScript DCT filter can emit files with many more than 10 blocks/MCU.
+ * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU
+ * to handle it.  We even let you do this from the jconfig.h file.  However,
+ * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe
+ * sometimes emits noncompliant files doesn't mean you should too.
+ */
+#define C_MAX_BLOCKS_IN_MCU   10 /* compressor's limit on blocks per MCU */
+#ifndef D_MAX_BLOCKS_IN_MCU
+#define D_MAX_BLOCKS_IN_MCU   10 /* decompressor's limit on blocks per MCU */
+#endif
+
+
+/* Data structures for images (arrays of samples and of DCT coefficients).
+ * On 80x86 machines, the image arrays are too big for near pointers,
+ * but the pointer arrays can fit in near memory.
+ */
+
+typedef JSAMPLE FAR *JSAMPROW;	/* ptr to one image row of pixel samples. */
+typedef JSAMPROW *JSAMPARRAY;	/* ptr to some rows (a 2-D sample array) */
+typedef JSAMPARRAY *JSAMPIMAGE;	/* a 3-D sample array: top index is color */
+
+typedef JCOEF JBLOCK[DCTSIZE2];	/* one block of coefficients */
+typedef JBLOCK FAR *JBLOCKROW;	/* pointer to one row of coefficient blocks */
+typedef JBLOCKROW *JBLOCKARRAY;		/* a 2-D array of coefficient blocks */
+typedef JBLOCKARRAY *JBLOCKIMAGE;	/* a 3-D array of coefficient blocks */
+
+typedef JCOEF FAR *JCOEFPTR;	/* useful in a couple of places */
+
+
+/* Types for JPEG compression parameters and working tables. */
+
+
+/* DCT coefficient quantization tables. */
+
+typedef struct {
+  /* This array gives the coefficient quantizers in natural array order
+   * (not the zigzag order in which they are stored in a JPEG DQT marker).
+   * CAUTION: IJG versions prior to v6a kept this array in zigzag order.
+   */
+  UINT16 quantval[DCTSIZE2];	/* quantization step for each coefficient */
+  /* This field is used only during compression.  It's initialized FALSE when
+   * the table is created, and set TRUE when it's been output to the file.
+   * You could suppress output of a table by setting this to TRUE.
+   * (See jpeg_suppress_tables for an example.)
+   */
+  boolean sent_table;		/* TRUE when table has been output */
+} JQUANT_TBL;
+
+
+/* Huffman coding tables. */
+
+typedef struct {
+  /* These two fields directly represent the contents of a JPEG DHT marker */
+  UINT8 bits[17];		/* bits[k] = # of symbols with codes of */
+				/* length k bits; bits[0] is unused */
+  UINT8 huffval[256];		/* The symbols, in order of incr code length */
+  /* This field is used only during compression.  It's initialized FALSE when
+   * the table is created, and set TRUE when it's been output to the file.
+   * You could suppress output of a table by setting this to TRUE.
+   * (See jpeg_suppress_tables for an example.)
+   */
+  boolean sent_table;		/* TRUE when table has been output */
+} JHUFF_TBL;
+
+
+/* Basic info about one component (color channel). */
+
+typedef struct {
+  /* These values are fixed over the whole image. */
+  /* For compression, they must be supplied by parameter setup; */
+  /* for decompression, they are read from the SOF marker. */
+  int component_id;		/* identifier for this component (0..255) */
+  int component_index;		/* its index in SOF or cinfo->comp_info[] */
+  int h_samp_factor;		/* horizontal sampling factor (1..4) */
+  int v_samp_factor;		/* vertical sampling factor (1..4) */
+  int quant_tbl_no;		/* quantization table selector (0..3) */
+  /* These values may vary between scans. */
+  /* For compression, they must be supplied by parameter setup; */
+  /* for decompression, they are read from the SOS marker. */
+  /* The decompressor output side may not use these variables. */
+  int dc_tbl_no;		/* DC entropy table selector (0..3) */
+  int ac_tbl_no;		/* AC entropy table selector (0..3) */
+  
+  /* Remaining fields should be treated as private by applications. */
+  
+  /* These values are computed during compression or decompression startup: */
+  /* Component's size in DCT blocks.
+   * Any dummy blocks added to complete an MCU are not counted; therefore
+   * these values do not depend on whether a scan is interleaved or not.
+   */
+  JDIMENSION width_in_blocks;
+  JDIMENSION height_in_blocks;
+  /* Size of a DCT block in samples,
+   * reflecting any scaling we choose to apply during the DCT step.
+   * Values from 1 to 16 are supported.
+   * Note that different components may receive different DCT scalings.
+   */
+  int DCT_h_scaled_size;
+  int DCT_v_scaled_size;
+  /* The downsampled dimensions are the component's actual, unpadded number
+   * of samples at the main buffer (preprocessing/compression interface);
+   * DCT scaling is included, so
+   * downsampled_width =
+   *   ceil(image_width * Hi/Hmax * DCT_h_scaled_size/block_size)
+   * and similarly for height.
+   */
+  JDIMENSION downsampled_width;	 /* actual width in samples */
+  JDIMENSION downsampled_height; /* actual height in samples */
+  /* For decompression, in cases where some of the components will be
+   * ignored (eg grayscale output from YCbCr image), we can skip most
+   * computations for the unused components.
+   * For compression, some of the components will need further quantization
+   * scale by factor of 2 after DCT (eg BG_YCC output from normal RGB input).
+   * The field is first set TRUE for decompression, FALSE for compression
+   * in initial_setup, and then adapted in color conversion setup.
+   */
+  boolean component_needed;
+
+  /* These values are computed before starting a scan of the component. */
+  /* The decompressor output side may not use these variables. */
+  int MCU_width;		/* number of blocks per MCU, horizontally */
+  int MCU_height;		/* number of blocks per MCU, vertically */
+  int MCU_blocks;		/* MCU_width * MCU_height */
+  int MCU_sample_width;	/* MCU width in samples: MCU_width * DCT_h_scaled_size */
+  int last_col_width;		/* # of non-dummy blocks across in last MCU */
+  int last_row_height;		/* # of non-dummy blocks down in last MCU */
+
+  /* Saved quantization table for component; NULL if none yet saved.
+   * See jdinput.c comments about the need for this information.
+   * This field is currently used only for decompression.
+   */
+  JQUANT_TBL * quant_table;
+
+  /* Private per-component storage for DCT or IDCT subsystem. */
+  void * dct_table;
+} jpeg_component_info;
+
+
+/* The script for encoding a multiple-scan file is an array of these: */
+
+typedef struct {
+  int comps_in_scan;		/* number of components encoded in this scan */
+  int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */
+  int Ss, Se;			/* progressive JPEG spectral selection parms */
+  int Ah, Al;			/* progressive JPEG successive approx. parms */
+} jpeg_scan_info;
+
+/* The decompressor can save APPn and COM markers in a list of these: */
+
+typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr;
+
+struct jpeg_marker_struct {
+  jpeg_saved_marker_ptr next;	/* next in list, or NULL */
+  UINT8 marker;			/* marker code: JPEG_COM, or JPEG_APP0+n */
+  unsigned int original_length;	/* # bytes of data in the file */
+  unsigned int data_length;	/* # bytes of data saved at data[] */
+  JOCTET FAR * data;		/* the data contained in the marker */
+  /* the marker length word is not counted in data_length or original_length */
+};
+
+/* Known color spaces. */
+
+typedef enum {
+	JCS_UNKNOWN,		/* error/unspecified */
+	JCS_GRAYSCALE,		/* monochrome */
+	JCS_RGB,		/* red/green/blue, standard RGB (sRGB) */
+	JCS_YCbCr,		/* Y/Cb/Cr (also known as YUV), standard YCC */
+	JCS_CMYK,		/* C/M/Y/K */
+	JCS_YCCK,		/* Y/Cb/Cr/K */
+	JCS_BG_RGB,		/* big gamut red/green/blue, bg-sRGB */
+	JCS_BG_YCC		/* big gamut Y/Cb/Cr, bg-sYCC */
+} J_COLOR_SPACE;
+
+/* Supported color transforms. */
+
+typedef enum {
+	JCT_NONE           = 0,
+	JCT_SUBTRACT_GREEN = 1
+} J_COLOR_TRANSFORM;
+
+/* DCT/IDCT algorithm options. */
+
+typedef enum {
+	JDCT_ISLOW,		/* slow but accurate integer algorithm */
+	JDCT_IFAST,		/* faster, less accurate integer method */
+	JDCT_FLOAT		/* floating-point: accurate, fast on fast HW */
+} J_DCT_METHOD;
+
+#ifndef JDCT_DEFAULT		/* may be overridden in jconfig.h */
+#define JDCT_DEFAULT  JDCT_ISLOW
+#endif
+#ifndef JDCT_FASTEST		/* may be overridden in jconfig.h */
+#define JDCT_FASTEST  JDCT_IFAST
+#endif
+
+/* Dithering options for decompression. */
+
+typedef enum {
+	JDITHER_NONE,		/* no dithering */
+	JDITHER_ORDERED,	/* simple ordered dither */
+	JDITHER_FS		/* Floyd-Steinberg error diffusion dither */
+} J_DITHER_MODE;
+
+
+/* Common fields between JPEG compression and decompression master structs. */
+
+#define jpeg_common_fields \
+  struct jpeg_error_mgr * err;	/* Error handler module */\
+  struct jpeg_memory_mgr * mem;	/* Memory manager module */\
+  struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\
+  void * client_data;		/* Available for use by application */\
+  boolean is_decompressor;	/* So common code can tell which is which */\
+  int global_state		/* For checking call sequence validity */
+
+/* Routines that are to be used by both halves of the library are declared
+ * to receive a pointer to this structure.  There are no actual instances of
+ * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct.
+ */
+struct jpeg_common_struct {
+  jpeg_common_fields;		/* Fields common to both master struct types */
+  /* Additional fields follow in an actual jpeg_compress_struct or
+   * jpeg_decompress_struct.  All three structs must agree on these
+   * initial fields!  (This would be a lot cleaner in C++.)
+   */
+};
+
+typedef struct jpeg_common_struct * j_common_ptr;
+typedef struct jpeg_compress_struct * j_compress_ptr;
+typedef struct jpeg_decompress_struct * j_decompress_ptr;
+
+
+/* Master record for a compression instance */
+
+struct jpeg_compress_struct {
+  jpeg_common_fields;		/* Fields shared with jpeg_decompress_struct */
+
+  /* Destination for compressed data */
+  struct jpeg_destination_mgr * dest;
+
+  /* Description of source image --- these fields must be filled in by
+   * outer application before starting compression.  in_color_space must
+   * be correct before you can even call jpeg_set_defaults().
+   */
+
+  JDIMENSION image_width;	/* input image width */
+  JDIMENSION image_height;	/* input image height */
+  int input_components;		/* # of color components in input image */
+  J_COLOR_SPACE in_color_space;	/* colorspace of input image */
+
+  double input_gamma;		/* image gamma of input image */
+
+  /* Compression parameters --- these fields must be set before calling
+   * jpeg_start_compress().  We recommend calling jpeg_set_defaults() to
+   * initialize everything to reasonable defaults, then changing anything
+   * the application specifically wants to change.  That way you won't get
+   * burnt when new parameters are added.  Also note that there are several
+   * helper routines to simplify changing parameters.
+   */
+
+  unsigned int scale_num, scale_denom; /* fraction by which to scale image */
+
+  JDIMENSION jpeg_width;	/* scaled JPEG image width */
+  JDIMENSION jpeg_height;	/* scaled JPEG image height */
+  /* Dimensions of actual JPEG image that will be written to file,
+   * derived from input dimensions by scaling factors above.
+   * These fields are computed by jpeg_start_compress().
+   * You can also use jpeg_calc_jpeg_dimensions() to determine these values
+   * in advance of calling jpeg_start_compress().
+   */
+
+  int data_precision;		/* bits of precision in image data */
+
+  int num_components;		/* # of color components in JPEG image */
+  J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */
+
+  jpeg_component_info * comp_info;
+  /* comp_info[i] describes component that appears i'th in SOF */
+
+  JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS];
+  int q_scale_factor[NUM_QUANT_TBLS];
+  /* ptrs to coefficient quantization tables, or NULL if not defined,
+   * and corresponding scale factors (percentage, initialized 100).
+   */
+
+  JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS];
+  JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS];
+  /* ptrs to Huffman coding tables, or NULL if not defined */
+
+  UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */
+  UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */
+  UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */
+
+  int num_scans;		/* # of entries in scan_info array */
+  const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */
+  /* The default value of scan_info is NULL, which causes a single-scan
+   * sequential JPEG file to be emitted.  To create a multi-scan file,
+   * set num_scans and scan_info to point to an array of scan definitions.
+   */
+
+  boolean raw_data_in;		/* TRUE=caller supplies downsampled data */
+  boolean arith_code;		/* TRUE=arithmetic coding, FALSE=Huffman */
+  boolean optimize_coding;	/* TRUE=optimize entropy encoding parms */
+  boolean CCIR601_sampling;	/* TRUE=first samples are cosited */
+  boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */
+  int smoothing_factor;		/* 1..100, or 0 for no input smoothing */
+  J_DCT_METHOD dct_method;	/* DCT algorithm selector */
+
+  /* The restart interval can be specified in absolute MCUs by setting
+   * restart_interval, or in MCU rows by setting restart_in_rows
+   * (in which case the correct restart_interval will be figured
+   * for each scan).
+   */
+  unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */
+  int restart_in_rows;		/* if > 0, MCU rows per restart interval */
+
+  /* Parameters controlling emission of special markers. */
+
+  boolean write_JFIF_header;	/* should a JFIF marker be written? */
+  UINT8 JFIF_major_version;	/* What to write for the JFIF version number */
+  UINT8 JFIF_minor_version;
+  /* These three values are not used by the JPEG code, merely copied */
+  /* into the JFIF APP0 marker.  density_unit can be 0 for unknown, */
+  /* 1 for dots/inch, or 2 for dots/cm.  Note that the pixel aspect */
+  /* ratio is defined by X_density/Y_density even when density_unit=0. */
+  UINT8 density_unit;		/* JFIF code for pixel size units */
+  UINT16 X_density;		/* Horizontal pixel density */
+  UINT16 Y_density;		/* Vertical pixel density */
+  boolean write_Adobe_marker;	/* should an Adobe marker be written? */
+
+  J_COLOR_TRANSFORM color_transform;
+  /* Color transform identifier, writes LSE marker if nonzero */
+
+  /* State variable: index of next scanline to be written to
+   * jpeg_write_scanlines().  Application may use this to control its
+   * processing loop, e.g., "while (next_scanline < image_height)".
+   */
+
+  JDIMENSION next_scanline;	/* 0 .. image_height-1  */
+
+  /* Remaining fields are known throughout compressor, but generally
+   * should not be touched by a surrounding application.
+   */
+
+  /*
+   * These fields are computed during compression startup
+   */
+  boolean progressive_mode;	/* TRUE if scan script uses progressive mode */
+  int max_h_samp_factor;	/* largest h_samp_factor */
+  int max_v_samp_factor;	/* largest v_samp_factor */
+
+  int min_DCT_h_scaled_size;	/* smallest DCT_h_scaled_size of any component */
+  int min_DCT_v_scaled_size;	/* smallest DCT_v_scaled_size of any component */
+
+  JDIMENSION total_iMCU_rows;	/* # of iMCU rows to be input to coef ctlr */
+  /* The coefficient controller receives data in units of MCU rows as defined
+   * for fully interleaved scans (whether the JPEG file is interleaved or not).
+   * There are v_samp_factor * DCTSIZE sample rows of each component in an
+   * "iMCU" (interleaved MCU) row.
+   */
+  
+  /*
+   * These fields are valid during any one scan.
+   * They describe the components and MCUs actually appearing in the scan.
+   */
+  int comps_in_scan;		/* # of JPEG components in this scan */
+  jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN];
+  /* *cur_comp_info[i] describes component that appears i'th in SOS */
+  
+  JDIMENSION MCUs_per_row;	/* # of MCUs across the image */
+  JDIMENSION MCU_rows_in_scan;	/* # of MCU rows in the image */
+  
+  int blocks_in_MCU;		/* # of DCT blocks per MCU */
+  int MCU_membership[C_MAX_BLOCKS_IN_MCU];
+  /* MCU_membership[i] is index in cur_comp_info of component owning */
+  /* i'th block in an MCU */
+
+  int Ss, Se, Ah, Al;		/* progressive JPEG parameters for scan */
+
+  int block_size;		/* the basic DCT block size: 1..16 */
+  const int * natural_order;	/* natural-order position array */
+  int lim_Se;			/* min( Se, DCTSIZE2-1 ) */
+
+  /*
+   * Links to compression subobjects (methods and private variables of modules)
+   */
+  struct jpeg_comp_master * master;
+  struct jpeg_c_main_controller * main;
+  struct jpeg_c_prep_controller * prep;
+  struct jpeg_c_coef_controller * coef;
+  struct jpeg_marker_writer * marker;
+  struct jpeg_color_converter * cconvert;
+  struct jpeg_downsampler * downsample;
+  struct jpeg_forward_dct * fdct;
+  struct jpeg_entropy_encoder * entropy;
+  jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */
+  int script_space_size;
+};
+
+
+/* Master record for a decompression instance */
+
+struct jpeg_decompress_struct {
+  jpeg_common_fields;		/* Fields shared with jpeg_compress_struct */
+
+  /* Source of compressed data */
+  struct jpeg_source_mgr * src;
+
+  /* Basic description of image --- filled in by jpeg_read_header(). */
+  /* Application may inspect these values to decide how to process image. */
+
+  JDIMENSION image_width;	/* nominal image width (from SOF marker) */
+  JDIMENSION image_height;	/* nominal image height */
+  int num_components;		/* # of color components in JPEG image */
+  J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */
+
+  /* Decompression processing parameters --- these fields must be set before
+   * calling jpeg_start_decompress().  Note that jpeg_read_header() initializes
+   * them to default values.
+   */
+
+  J_COLOR_SPACE out_color_space; /* colorspace for output */
+
+  unsigned int scale_num, scale_denom; /* fraction by which to scale image */
+
+  double output_gamma;		/* image gamma wanted in output */
+
+  boolean buffered_image;	/* TRUE=multiple output passes */
+  boolean raw_data_out;		/* TRUE=downsampled data wanted */
+
+  J_DCT_METHOD dct_method;	/* IDCT algorithm selector */
+  boolean do_fancy_upsampling;	/* TRUE=apply fancy upsampling */
+  boolean do_block_smoothing;	/* TRUE=apply interblock smoothing */
+
+  boolean quantize_colors;	/* TRUE=colormapped output wanted */
+  /* the following are ignored if not quantize_colors: */
+  J_DITHER_MODE dither_mode;	/* type of color dithering to use */
+  boolean two_pass_quantize;	/* TRUE=use two-pass color quantization */
+  int desired_number_of_colors;	/* max # colors to use in created colormap */
+  /* these are significant only in buffered-image mode: */
+  boolean enable_1pass_quant;	/* enable future use of 1-pass quantizer */
+  boolean enable_external_quant;/* enable future use of external colormap */
+  boolean enable_2pass_quant;	/* enable future use of 2-pass quantizer */
+
+  /* Description of actual output image that will be returned to application.
+   * These fields are computed by jpeg_start_decompress().
+   * You can also use jpeg_calc_output_dimensions() to determine these values
+   * in advance of calling jpeg_start_decompress().
+   */
+
+  JDIMENSION output_width;	/* scaled image width */
+  JDIMENSION output_height;	/* scaled image height */
+  int out_color_components;	/* # of color components in out_color_space */
+  int output_components;	/* # of color components returned */
+  /* output_components is 1 (a colormap index) when quantizing colors;
+   * otherwise it equals out_color_components.
+   */
+  int rec_outbuf_height;	/* min recommended height of scanline buffer */
+  /* If the buffer passed to jpeg_read_scanlines() is less than this many rows
+   * high, space and time will be wasted due to unnecessary data copying.
+   * Usually rec_outbuf_height will be 1 or 2, at most 4.
+   */
+
+  /* When quantizing colors, the output colormap is described by these fields.
+   * The application can supply a colormap by setting colormap non-NULL before
+   * calling jpeg_start_decompress; otherwise a colormap is created during
+   * jpeg_start_decompress or jpeg_start_output.
+   * The map has out_color_components rows and actual_number_of_colors columns.
+   */
+  int actual_number_of_colors;	/* number of entries in use */
+  JSAMPARRAY colormap;		/* The color map as a 2-D pixel array */
+
+  /* State variables: these variables indicate the progress of decompression.
+   * The application may examine these but must not modify them.
+   */
+
+  /* Row index of next scanline to be read from jpeg_read_scanlines().
+   * Application may use this to control its processing loop, e.g.,
+   * "while (output_scanline < output_height)".
+   */
+  JDIMENSION output_scanline;	/* 0 .. output_height-1  */
+
+  /* Current input scan number and number of iMCU rows completed in scan.
+   * These indicate the progress of the decompressor input side.
+   */
+  int input_scan_number;	/* Number of SOS markers seen so far */
+  JDIMENSION input_iMCU_row;	/* Number of iMCU rows completed */
+
+  /* The "output scan number" is the notional scan being displayed by the
+   * output side.  The decompressor will not allow output scan/row number
+   * to get ahead of input scan/row, but it can fall arbitrarily far behind.
+   */
+  int output_scan_number;	/* Nominal scan number being displayed */
+  JDIMENSION output_iMCU_row;	/* Number of iMCU rows read */
+
+  /* Current progression status.  coef_bits[c][i] indicates the precision
+   * with which component c's DCT coefficient i (in zigzag order) is known.
+   * It is -1 when no data has yet been received, otherwise it is the point
+   * transform (shift) value for the most recent scan of the coefficient
+   * (thus, 0 at completion of the progression).
+   * This pointer is NULL when reading a non-progressive file.
+   */
+  int (*coef_bits)[DCTSIZE2];	/* -1 or current Al value for each coef */
+
+  /* Internal JPEG parameters --- the application usually need not look at
+   * these fields.  Note that the decompressor output side may not use
+   * any parameters that can change between scans.
+   */
+
+  /* Quantization and Huffman tables are carried forward across input
+   * datastreams when processing abbreviated JPEG datastreams.
+   */
+
+  JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS];
+  /* ptrs to coefficient quantization tables, or NULL if not defined */
+
+  JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS];
+  JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS];
+  /* ptrs to Huffman coding tables, or NULL if not defined */
+
+  /* These parameters are never carried across datastreams, since they
+   * are given in SOF/SOS markers or defined to be reset by SOI.
+   */
+
+  int data_precision;		/* bits of precision in image data */
+
+  jpeg_component_info * comp_info;
+  /* comp_info[i] describes component that appears i'th in SOF */
+
+  boolean is_baseline;		/* TRUE if Baseline SOF0 encountered */
+  boolean progressive_mode;	/* TRUE if SOFn specifies progressive mode */
+  boolean arith_code;		/* TRUE=arithmetic coding, FALSE=Huffman */
+
+  UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */
+  UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */
+  UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */
+
+  unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */
+
+  /* These fields record data obtained from optional markers recognized by
+   * the JPEG library.
+   */
+  boolean saw_JFIF_marker;	/* TRUE iff a JFIF APP0 marker was found */
+  /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */
+  UINT8 JFIF_major_version;	/* JFIF version number */
+  UINT8 JFIF_minor_version;
+  UINT8 density_unit;		/* JFIF code for pixel size units */
+  UINT16 X_density;		/* Horizontal pixel density */
+  UINT16 Y_density;		/* Vertical pixel density */
+  boolean saw_Adobe_marker;	/* TRUE iff an Adobe APP14 marker was found */
+  UINT8 Adobe_transform;	/* Color transform code from Adobe marker */
+
+  J_COLOR_TRANSFORM color_transform;
+  /* Color transform identifier derived from LSE marker, otherwise zero */
+
+  boolean CCIR601_sampling;	/* TRUE=first samples are cosited */
+
+  /* Aside from the specific data retained from APPn markers known to the
+   * library, the uninterpreted contents of any or all APPn and COM markers
+   * can be saved in a list for examination by the application.
+   */
+  jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */
+
+  /* Remaining fields are known throughout decompressor, but generally
+   * should not be touched by a surrounding application.
+   */
+
+  /*
+   * These fields are computed during decompression startup
+   */
+  int max_h_samp_factor;	/* largest h_samp_factor */
+  int max_v_samp_factor;	/* largest v_samp_factor */
+
+  int min_DCT_h_scaled_size;	/* smallest DCT_h_scaled_size of any component */
+  int min_DCT_v_scaled_size;	/* smallest DCT_v_scaled_size of any component */
+
+  JDIMENSION total_iMCU_rows;	/* # of iMCU rows in image */
+  /* The coefficient controller's input and output progress is measured in
+   * units of "iMCU" (interleaved MCU) rows.  These are the same as MCU rows
+   * in fully interleaved JPEG scans, but are used whether the scan is
+   * interleaved or not.  We define an iMCU row as v_samp_factor DCT block
+   * rows of each component.  Therefore, the IDCT output contains
+   * v_samp_factor*DCT_v_scaled_size sample rows of a component per iMCU row.
+   */
+
+  JSAMPLE * sample_range_limit; /* table for fast range-limiting */
+
+  /*
+   * These fields are valid during any one scan.
+   * They describe the components and MCUs actually appearing in the scan.
+   * Note that the decompressor output side must not use these fields.
+   */
+  int comps_in_scan;		/* # of JPEG components in this scan */
+  jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN];
+  /* *cur_comp_info[i] describes component that appears i'th in SOS */
+
+  JDIMENSION MCUs_per_row;	/* # of MCUs across the image */
+  JDIMENSION MCU_rows_in_scan;	/* # of MCU rows in the image */
+
+  int blocks_in_MCU;		/* # of DCT blocks per MCU */
+  int MCU_membership[D_MAX_BLOCKS_IN_MCU];
+  /* MCU_membership[i] is index in cur_comp_info of component owning */
+  /* i'th block in an MCU */
+
+  int Ss, Se, Ah, Al;		/* progressive JPEG parameters for scan */
+
+  /* These fields are derived from Se of first SOS marker.
+   */
+  int block_size;		/* the basic DCT block size: 1..16 */
+  const int * natural_order; /* natural-order position array for entropy decode */
+  int lim_Se;			/* min( Se, DCTSIZE2-1 ) for entropy decode */
+
+  /* This field is shared between entropy decoder and marker parser.
+   * It is either zero or the code of a JPEG marker that has been
+   * read from the data source, but has not yet been processed.
+   */
+  int unread_marker;
+
+  /*
+   * Links to decompression subobjects (methods, private variables of modules)
+   */
+  struct jpeg_decomp_master * master;
+  struct jpeg_d_main_controller * main;
+  struct jpeg_d_coef_controller * coef;
+  struct jpeg_d_post_controller * post;
+  struct jpeg_input_controller * inputctl;
+  struct jpeg_marker_reader * marker;
+  struct jpeg_entropy_decoder * entropy;
+  struct jpeg_inverse_dct * idct;
+  struct jpeg_upsampler * upsample;
+  struct jpeg_color_deconverter * cconvert;
+  struct jpeg_color_quantizer * cquantize;
+};
+
+
+/* "Object" declarations for JPEG modules that may be supplied or called
+ * directly by the surrounding application.
+ * As with all objects in the JPEG library, these structs only define the
+ * publicly visible methods and state variables of a module.  Additional
+ * private fields may exist after the public ones.
+ */
+
+
+/* Error handler object */
+
+struct jpeg_error_mgr {
+  /* Error exit handler: does not return to caller */
+  JMETHOD(noreturn_t, error_exit, (j_common_ptr cinfo));
+  /* Conditionally emit a trace or warning message */
+  JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level));
+  /* Routine that actually outputs a trace or error message */
+  JMETHOD(void, output_message, (j_common_ptr cinfo));
+  /* Format a message string for the most recent JPEG error or message */
+  JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer));
+#define JMSG_LENGTH_MAX  200	/* recommended size of format_message buffer */
+  /* Reset error state variables at start of a new image */
+  JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo));
+  
+  /* The message ID code and any parameters are saved here.
+   * A message can have one string parameter or up to 8 int parameters.
+   */
+  int msg_code;
+#define JMSG_STR_PARM_MAX  80
+  union {
+    int i[8];
+    char s[JMSG_STR_PARM_MAX];
+  } msg_parm;
+  
+  /* Standard state variables for error facility */
+  
+  int trace_level;		/* max msg_level that will be displayed */
+  
+  /* For recoverable corrupt-data errors, we emit a warning message,
+   * but keep going unless emit_message chooses to abort.  emit_message
+   * should count warnings in num_warnings.  The surrounding application
+   * can check for bad data by seeing if num_warnings is nonzero at the
+   * end of processing.
+   */
+  long num_warnings;		/* number of corrupt-data warnings */
+
+  /* These fields point to the table(s) of error message strings.
+   * An application can change the table pointer to switch to a different
+   * message list (typically, to change the language in which errors are
+   * reported).  Some applications may wish to add additional error codes
+   * that will be handled by the JPEG library error mechanism; the second
+   * table pointer is used for this purpose.
+   *
+   * First table includes all errors generated by JPEG library itself.
+   * Error code 0 is reserved for a "no such error string" message.
+   */
+  const char * const * jpeg_message_table; /* Library errors */
+  int last_jpeg_message;    /* Table contains strings 0..last_jpeg_message */
+  /* Second table can be added by application (see cjpeg/djpeg for example).
+   * It contains strings numbered first_addon_message..last_addon_message.
+   */
+  const char * const * addon_message_table; /* Non-library errors */
+  int first_addon_message;	/* code for first string in addon table */
+  int last_addon_message;	/* code for last string in addon table */
+};
+
+
+/* Progress monitor object */
+
+struct jpeg_progress_mgr {
+  JMETHOD(void, progress_monitor, (j_common_ptr cinfo));
+
+  long pass_counter;		/* work units completed in this pass */
+  long pass_limit;		/* total number of work units in this pass */
+  int completed_passes;		/* passes completed so far */
+  int total_passes;		/* total number of passes expected */
+};
+
+
+/* Data destination object for compression */
+
+struct jpeg_destination_mgr {
+  JOCTET * next_output_byte;	/* => next byte to write in buffer */
+  size_t free_in_buffer;	/* # of byte spaces remaining in buffer */
+
+  JMETHOD(void, init_destination, (j_compress_ptr cinfo));
+  JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo));
+  JMETHOD(void, term_destination, (j_compress_ptr cinfo));
+};
+
+
+/* Data source object for decompression */
+
+struct jpeg_source_mgr {
+  const JOCTET * next_input_byte; /* => next byte to read from buffer */
+  size_t bytes_in_buffer;	/* # of bytes remaining in buffer */
+
+  JMETHOD(void, init_source, (j_decompress_ptr cinfo));
+  JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo));
+  JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes));
+  JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired));
+  JMETHOD(void, term_source, (j_decompress_ptr cinfo));
+};
+
+
+/* Memory manager object.
+ * Allocates "small" objects (a few K total), "large" objects (tens of K),
+ * and "really big" objects (virtual arrays with backing store if needed).
+ * The memory manager does not allow individual objects to be freed; rather,
+ * each created object is assigned to a pool, and whole pools can be freed
+ * at once.  This is faster and more convenient than remembering exactly what
+ * to free, especially where malloc()/free() are not too speedy.
+ * NB: alloc routines never return NULL.  They exit to error_exit if not
+ * successful.
+ */
+
+#define JPOOL_PERMANENT	0	/* lasts until master record is destroyed */
+#define JPOOL_IMAGE	1	/* lasts until done with image/datastream */
+#define JPOOL_NUMPOOLS	2
+
+typedef struct jvirt_sarray_control * jvirt_sarray_ptr;
+typedef struct jvirt_barray_control * jvirt_barray_ptr;
+
+
+struct jpeg_memory_mgr {
+  /* Method pointers */
+  JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id,
+				size_t sizeofobject));
+  JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id,
+				     size_t sizeofobject));
+  JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id,
+				     JDIMENSION samplesperrow,
+				     JDIMENSION numrows));
+  JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id,
+				      JDIMENSION blocksperrow,
+				      JDIMENSION numrows));
+  JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo,
+						  int pool_id,
+						  boolean pre_zero,
+						  JDIMENSION samplesperrow,
+						  JDIMENSION numrows,
+						  JDIMENSION maxaccess));
+  JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo,
+						  int pool_id,
+						  boolean pre_zero,
+						  JDIMENSION blocksperrow,
+						  JDIMENSION numrows,
+						  JDIMENSION maxaccess));
+  JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo));
+  JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo,
+					   jvirt_sarray_ptr ptr,
+					   JDIMENSION start_row,
+					   JDIMENSION num_rows,
+					   boolean writable));
+  JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo,
+					    jvirt_barray_ptr ptr,
+					    JDIMENSION start_row,
+					    JDIMENSION num_rows,
+					    boolean writable));
+  JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id));
+  JMETHOD(void, self_destruct, (j_common_ptr cinfo));
+
+  /* Limit on memory allocation for this JPEG object.  (Note that this is
+   * merely advisory, not a guaranteed maximum; it only affects the space
+   * used for virtual-array buffers.)  May be changed by outer application
+   * after creating the JPEG object.
+   */
+  long max_memory_to_use;
+
+  /* Maximum allocation request accepted by alloc_large. */
+  long max_alloc_chunk;
+};
+
+
+/* Routine signature for application-supplied marker processing methods.
+ * Need not pass marker code since it is stored in cinfo->unread_marker.
+ */
+typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo));
+
+
+/* Declarations for routines called by application.
+ * The JPP macro hides prototype parameters from compilers that can't cope.
+ * Note JPP requires double parentheses.
+ */
+
+#ifdef HAVE_PROTOTYPES
+#define JPP(arglist)	arglist
+#else
+#define JPP(arglist)	()
+#endif
+
+
+/* Short forms of external names for systems with brain-damaged linkers.
+ * We shorten external names to be unique in the first six letters, which
+ * is good enough for all known systems.
+ * (If your compiler itself needs names to be unique in less than 15 
+ * characters, you are out of luck.  Get a better compiler.)
+ */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jpeg_std_error		jStdError
+#define jpeg_CreateCompress	jCreaCompress
+#define jpeg_CreateDecompress	jCreaDecompress
+#define jpeg_destroy_compress	jDestCompress
+#define jpeg_destroy_decompress	jDestDecompress
+#define jpeg_stdio_dest		jStdDest
+#define jpeg_stdio_src		jStdSrc
+#define jpeg_mem_dest		jMemDest
+#define jpeg_mem_src		jMemSrc
+#define jpeg_set_defaults	jSetDefaults
+#define jpeg_set_colorspace	jSetColorspace
+#define jpeg_default_colorspace	jDefColorspace
+#define jpeg_set_quality	jSetQuality
+#define jpeg_set_linear_quality	jSetLQuality
+#define jpeg_default_qtables	jDefQTables
+#define jpeg_add_quant_table	jAddQuantTable
+#define jpeg_quality_scaling	jQualityScaling
+#define jpeg_simple_progression	jSimProgress
+#define jpeg_suppress_tables	jSuppressTables
+#define jpeg_alloc_quant_table	jAlcQTable
+#define jpeg_alloc_huff_table	jAlcHTable
+#define jpeg_start_compress	jStrtCompress
+#define jpeg_write_scanlines	jWrtScanlines
+#define jpeg_finish_compress	jFinCompress
+#define jpeg_calc_jpeg_dimensions	jCjpegDimensions
+#define jpeg_write_raw_data	jWrtRawData
+#define jpeg_write_marker	jWrtMarker
+#define jpeg_write_m_header	jWrtMHeader
+#define jpeg_write_m_byte	jWrtMByte
+#define jpeg_write_tables	jWrtTables
+#define jpeg_read_header	jReadHeader
+#define jpeg_start_decompress	jStrtDecompress
+#define jpeg_read_scanlines	jReadScanlines
+#define jpeg_finish_decompress	jFinDecompress
+#define jpeg_read_raw_data	jReadRawData
+#define jpeg_has_multiple_scans	jHasMultScn
+#define jpeg_start_output	jStrtOutput
+#define jpeg_finish_output	jFinOutput
+#define jpeg_input_complete	jInComplete
+#define jpeg_new_colormap	jNewCMap
+#define jpeg_consume_input	jConsumeInput
+#define jpeg_core_output_dimensions	jCoreDimensions
+#define jpeg_calc_output_dimensions	jCalcDimensions
+#define jpeg_save_markers	jSaveMarkers
+#define jpeg_set_marker_processor	jSetMarker
+#define jpeg_read_coefficients	jReadCoefs
+#define jpeg_write_coefficients	jWrtCoefs
+#define jpeg_copy_critical_parameters	jCopyCrit
+#define jpeg_abort_compress	jAbrtCompress
+#define jpeg_abort_decompress	jAbrtDecompress
+#define jpeg_abort		jAbort
+#define jpeg_destroy		jDestroy
+#define jpeg_resync_to_restart	jResyncRestart
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+
+/* Default error-management setup */
+EXTERN(struct jpeg_error_mgr *) jpeg_std_error
+	JPP((struct jpeg_error_mgr * err));
+
+/* Initialization of JPEG compression objects.
+ * jpeg_create_compress() and jpeg_create_decompress() are the exported
+ * names that applications should call.  These expand to calls on
+ * jpeg_CreateCompress and jpeg_CreateDecompress with additional information
+ * passed for version mismatch checking.
+ * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx.
+ */
+#define jpeg_create_compress(cinfo) \
+    jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \
+			(size_t) sizeof(struct jpeg_compress_struct))
+#define jpeg_create_decompress(cinfo) \
+    jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \
+			  (size_t) sizeof(struct jpeg_decompress_struct))
+EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo,
+				      int version, size_t structsize));
+EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo,
+					int version, size_t structsize));
+/* Destruction of JPEG compression objects */
+EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo));
+EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo));
+
+/* Standard data source and destination managers: stdio streams. */
+/* Caller is responsible for opening the file before and closing after. */
+EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile));
+EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile));
+
+/* Data source and destination managers: memory buffers. */
+EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo,
+			       unsigned char ** outbuffer,
+			       unsigned long * outsize));
+EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo,
+			      unsigned char * inbuffer,
+			      unsigned long insize));
+
+/* Default parameter setup for compression */
+EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo));
+/* Compression parameter setup aids */
+EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo,
+				      J_COLOR_SPACE colorspace));
+EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo));
+EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality,
+				   boolean force_baseline));
+EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo,
+					  int scale_factor,
+					  boolean force_baseline));
+EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo,
+				       boolean force_baseline));
+EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl,
+				       const unsigned int *basic_table,
+				       int scale_factor,
+				       boolean force_baseline));
+EXTERN(int) jpeg_quality_scaling JPP((int quality));
+EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo));
+EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo,
+				       boolean suppress));
+EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo));
+EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo));
+
+/* Main entry points for compression */
+EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo,
+				      boolean write_all_tables));
+EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo,
+					     JSAMPARRAY scanlines,
+					     JDIMENSION num_lines));
+EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo));
+
+/* Precalculate JPEG dimensions for current compression parameters. */
+EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo));
+
+/* Replaces jpeg_write_scanlines when writing raw downsampled data. */
+EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo,
+					    JSAMPIMAGE data,
+					    JDIMENSION num_lines));
+
+/* Write a special marker.  See libjpeg.txt concerning safe usage. */
+EXTERN(void) jpeg_write_marker
+	JPP((j_compress_ptr cinfo, int marker,
+	     const JOCTET * dataptr, unsigned int datalen));
+/* Same, but piecemeal. */
+EXTERN(void) jpeg_write_m_header
+	JPP((j_compress_ptr cinfo, int marker, unsigned int datalen));
+EXTERN(void) jpeg_write_m_byte
+	JPP((j_compress_ptr cinfo, int val));
+
+/* Alternate compression function: just write an abbreviated table file */
+EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo));
+
+/* Decompression startup: read start of JPEG datastream to see what's there */
+EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo,
+				  boolean require_image));
+/* Return value is one of: */
+#define JPEG_SUSPENDED		0 /* Suspended due to lack of input data */
+#define JPEG_HEADER_OK		1 /* Found valid image datastream */
+#define JPEG_HEADER_TABLES_ONLY	2 /* Found valid table-specs-only datastream */
+/* If you pass require_image = TRUE (normal case), you need not check for
+ * a TABLES_ONLY return code; an abbreviated file will cause an error exit.
+ * JPEG_SUSPENDED is only possible if you use a data source module that can
+ * give a suspension return (the stdio source module doesn't).
+ */
+
+/* Main entry points for decompression */
+EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo));
+EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo,
+					    JSAMPARRAY scanlines,
+					    JDIMENSION max_lines));
+EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo));
+
+/* Replaces jpeg_read_scanlines when reading raw downsampled data. */
+EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo,
+					   JSAMPIMAGE data,
+					   JDIMENSION max_lines));
+
+/* Additional entry points for buffered-image mode. */
+EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo));
+EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo,
+				       int scan_number));
+EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo));
+EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo));
+EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo));
+EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo));
+/* Return value is one of: */
+/* #define JPEG_SUSPENDED	0    Suspended due to lack of input data */
+#define JPEG_REACHED_SOS	1 /* Reached start of new scan */
+#define JPEG_REACHED_EOI	2 /* Reached end of image */
+#define JPEG_ROW_COMPLETED	3 /* Completed one iMCU row */
+#define JPEG_SCAN_COMPLETED	4 /* Completed last iMCU row of a scan */
+
+/* Precalculate output dimensions for current decompression parameters. */
+EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo));
+EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo));
+
+/* Control saving of COM and APPn markers into marker_list. */
+EXTERN(void) jpeg_save_markers
+	JPP((j_decompress_ptr cinfo, int marker_code,
+	     unsigned int length_limit));
+
+/* Install a special processing method for COM or APPn markers. */
+EXTERN(void) jpeg_set_marker_processor
+	JPP((j_decompress_ptr cinfo, int marker_code,
+	     jpeg_marker_parser_method routine));
+
+/* Read or write raw DCT coefficients --- useful for lossless transcoding. */
+EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo));
+EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo,
+					  jvirt_barray_ptr * coef_arrays));
+EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo,
+						j_compress_ptr dstinfo));
+
+/* If you choose to abort compression or decompression before completing
+ * jpeg_finish_(de)compress, then you need to clean up to release memory,
+ * temporary files, etc.  You can just call jpeg_destroy_(de)compress
+ * if you're done with the JPEG object, but if you want to clean it up and
+ * reuse it, call this:
+ */
+EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo));
+EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo));
+
+/* Generic versions of jpeg_abort and jpeg_destroy that work on either
+ * flavor of JPEG object.  These may be more convenient in some places.
+ */
+EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo));
+EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo));
+
+/* Default restart-marker-resync procedure for use by data source modules */
+EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo,
+					    int desired));
+
+
+/* These marker codes are exported since applications and data source modules
+ * are likely to want to use them.
+ */
+
+#define JPEG_RST0	0xD0	/* RST0 marker code */
+#define JPEG_EOI	0xD9	/* EOI marker code */
+#define JPEG_APP0	0xE0	/* APP0 marker code */
+#define JPEG_COM	0xFE	/* COM marker code */
+
+
+/* If we have a brain-damaged compiler that emits warnings (or worse, errors)
+ * for structure definitions that are never filled in, keep it quiet by
+ * supplying dummy definitions for the various substructures.
+ */
+
+#ifdef INCOMPLETE_TYPES_BROKEN
+#ifndef JPEG_INTERNALS		/* will be defined in jpegint.h */
+struct jvirt_sarray_control { long dummy; };
+struct jvirt_barray_control { long dummy; };
+struct jpeg_comp_master { long dummy; };
+struct jpeg_c_main_controller { long dummy; };
+struct jpeg_c_prep_controller { long dummy; };
+struct jpeg_c_coef_controller { long dummy; };
+struct jpeg_marker_writer { long dummy; };
+struct jpeg_color_converter { long dummy; };
+struct jpeg_downsampler { long dummy; };
+struct jpeg_forward_dct { long dummy; };
+struct jpeg_entropy_encoder { long dummy; };
+struct jpeg_decomp_master { long dummy; };
+struct jpeg_d_main_controller { long dummy; };
+struct jpeg_d_coef_controller { long dummy; };
+struct jpeg_d_post_controller { long dummy; };
+struct jpeg_input_controller { long dummy; };
+struct jpeg_marker_reader { long dummy; };
+struct jpeg_entropy_decoder { long dummy; };
+struct jpeg_inverse_dct { long dummy; };
+struct jpeg_upsampler { long dummy; };
+struct jpeg_color_deconverter { long dummy; };
+struct jpeg_color_quantizer { long dummy; };
+#endif /* JPEG_INTERNALS */
+#endif /* INCOMPLETE_TYPES_BROKEN */
+
+
+/*
+ * The JPEG library modules define JPEG_INTERNALS before including this file.
+ * The internal structure declarations are read only when that is true.
+ * Applications using the library should not include jpegint.h, but may wish
+ * to include jerror.h.
+ */
+
+#ifdef JPEG_INTERNALS
+#include "jpegint.h"		/* fetch private declarations */
+#include "jerror.h"		/* fetch error codes too */
+#endif
+
+#ifdef __cplusplus
+#ifndef DONT_USE_EXTERN_C
+}
+#endif
+#endif
+
+#endif /* JPEGLIB_H */
diff --git a/jpeg/90/transupp.c b/jpeg/90/transupp.c
new file mode 100644
index 0000000..525932a
--- /dev/null
+++ b/jpeg/90/transupp.c
@@ -0,0 +1,1763 @@
+/*
+ * transupp.c
+ *
+ * Copyright (C) 1997-2013, Thomas G. Lane, Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains image transformation routines and other utility code
+ * used by the jpegtran sample application.  These are NOT part of the core
+ * JPEG library.  But we keep these routines separate from jpegtran.c to
+ * ease the task of maintaining jpegtran-like programs that have other user
+ * interfaces.
+ */
+
+/* Although this file really shouldn't have access to the library internals,
+ * it's helpful to let it call jround_up() and jcopy_block_row().
+ */
+#define JPEG_INTERNALS
+
+#include "jinclude.h"
+#include "jpeglib.h"
+#include "transupp.h"		/* My own external interface */
+#include <ctype.h>		/* to declare isdigit() */
+
+
+#if TRANSFORMS_SUPPORTED
+
+/*
+ * Lossless image transformation routines.  These routines work on DCT
+ * coefficient arrays and thus do not require any lossy decompression
+ * or recompression of the image.
+ * Thanks to Guido Vollbeding for the initial design and code of this feature,
+ * and to Ben Jackson for introducing the cropping feature.
+ *
+ * Horizontal flipping is done in-place, using a single top-to-bottom
+ * pass through the virtual source array.  It will thus be much the
+ * fastest option for images larger than main memory.
+ *
+ * The other routines require a set of destination virtual arrays, so they
+ * need twice as much memory as jpegtran normally does.  The destination
+ * arrays are always written in normal scan order (top to bottom) because
+ * the virtual array manager expects this.  The source arrays will be scanned
+ * in the corresponding order, which means multiple passes through the source
+ * arrays for most of the transforms.  That could result in much thrashing
+ * if the image is larger than main memory.
+ *
+ * If cropping or trimming is involved, the destination arrays may be smaller
+ * than the source arrays.  Note it is not possible to do horizontal flip
+ * in-place when a nonzero Y crop offset is specified, since we'd have to move
+ * data from one block row to another but the virtual array manager doesn't
+ * guarantee we can touch more than one row at a time.  So in that case,
+ * we have to use a separate destination array.
+ *
+ * Some notes about the operating environment of the individual transform
+ * routines:
+ * 1. Both the source and destination virtual arrays are allocated from the
+ *    source JPEG object, and therefore should be manipulated by calling the
+ *    source's memory manager.
+ * 2. The destination's component count should be used.  It may be smaller
+ *    than the source's when forcing to grayscale.
+ * 3. Likewise the destination's sampling factors should be used.  When
+ *    forcing to grayscale the destination's sampling factors will be all 1,
+ *    and we may as well take that as the effective iMCU size.
+ * 4. When "trim" is in effect, the destination's dimensions will be the
+ *    trimmed values but the source's will be untrimmed.
+ * 5. When "crop" is in effect, the destination's dimensions will be the
+ *    cropped values but the source's will be uncropped.  Each transform
+ *    routine is responsible for picking up source data starting at the
+ *    correct X and Y offset for the crop region.  (The X and Y offsets
+ *    passed to the transform routines are measured in iMCU blocks of the
+ *    destination.)
+ * 6. All the routines assume that the source and destination buffers are
+ *    padded out to a full iMCU boundary.  This is true, although for the
+ *    source buffer it is an undocumented property of jdcoefct.c.
+ */
+
+
+LOCAL(void)
+do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	 JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	 jvirt_barray_ptr *src_coef_arrays,
+	 jvirt_barray_ptr *dst_coef_arrays)
+/* Crop.  This is only used when no rotate/flip is requested with the crop. */
+{
+  JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks;
+  int ci, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  jpeg_component_info *compptr;
+
+  /* We simply have to copy the right amount of data (the destination's
+   * image size) starting at the given X and Y offsets in the source.
+   */
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      src_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	 dst_blk_y + y_crop_blocks,
+	 (JDIMENSION) compptr->v_samp_factor, FALSE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
+			dst_buffer[offset_y],
+			compptr->width_in_blocks);
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_crop_ext (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	     JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	     jvirt_barray_ptr *src_coef_arrays,
+	     jvirt_barray_ptr *dst_coef_arrays)
+/* Crop.  This is only used when no rotate/flip is requested with the crop.
+ * Extension: If the destination size is larger than the source, we fill in
+ * the extra area with zero (neutral gray).  Note we also have to zero partial
+ * iMCUs at the right and bottom edge of the source image area in this case.
+ */
+{
+  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height;
+  JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks;
+  int ci, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  jpeg_component_info *compptr;
+
+  MCU_cols = srcinfo->output_width /
+    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
+  MCU_rows = srcinfo->output_height /
+    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      if (dstinfo->jpeg_height > srcinfo->output_height) {
+	if (dst_blk_y < y_crop_blocks ||
+	    dst_blk_y >= comp_height + y_crop_blocks) {
+	  for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	    FMEMZERO(dst_buffer[offset_y],
+		     compptr->width_in_blocks * SIZEOF(JBLOCK));
+	  }
+	  continue;
+	}
+	src_buffer = (*srcinfo->mem->access_virt_barray)
+	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	   dst_blk_y - y_crop_blocks,
+	   (JDIMENSION) compptr->v_samp_factor, FALSE);
+      } else {
+	src_buffer = (*srcinfo->mem->access_virt_barray)
+	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	   dst_blk_y + y_crop_blocks,
+	   (JDIMENSION) compptr->v_samp_factor, FALSE);
+      }
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	if (dstinfo->jpeg_width > srcinfo->output_width) {
+	  if (x_crop_blocks > 0) {
+	    FMEMZERO(dst_buffer[offset_y],
+		     x_crop_blocks * SIZEOF(JBLOCK));
+	  }
+	  jcopy_block_row(src_buffer[offset_y],
+			  dst_buffer[offset_y] + x_crop_blocks,
+			  comp_width);
+	  if (compptr->width_in_blocks > comp_width + x_crop_blocks) {
+	    FMEMZERO(dst_buffer[offset_y] +
+		       comp_width + x_crop_blocks,
+		     (compptr->width_in_blocks -
+		       comp_width - x_crop_blocks) * SIZEOF(JBLOCK));
+	  }
+	} else {
+	  jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
+			  dst_buffer[offset_y],
+			  compptr->width_in_blocks);
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_wipe (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	 JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	 jvirt_barray_ptr *src_coef_arrays,
+	 JDIMENSION drop_width, JDIMENSION drop_height)
+/* Wipe - drop content of specified area, fill with zero (neutral gray) */
+{
+  JDIMENSION comp_width, comp_height;
+  JDIMENSION blk_y, x_wipe_blocks, y_wipe_blocks;
+  int ci, offset_y;
+  JBLOCKARRAY buffer;
+  jpeg_component_info *compptr;
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = drop_width * compptr->h_samp_factor;
+    comp_height = drop_height * compptr->v_samp_factor;
+    x_wipe_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_wipe_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (blk_y = 0; blk_y < comp_height; blk_y += compptr->v_samp_factor) {
+      buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y + y_wipe_blocks,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	FMEMZERO(buffer[offset_y] + x_wipe_blocks,
+		 comp_width * SIZEOF(JBLOCK));
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_flip_h_no_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+		   JDIMENSION x_crop_offset,
+		   jvirt_barray_ptr *src_coef_arrays)
+/* Horizontal flip; done in-place, so no separate dest array is required.
+ * NB: this only works when y_crop_offset is zero.
+ */
+{
+  JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks;
+  int ci, k, offset_y;
+  JBLOCKARRAY buffer;
+  JCOEFPTR ptr1, ptr2;
+  JCOEF temp1, temp2;
+  jpeg_component_info *compptr;
+
+  /* Horizontal mirroring of DCT blocks is accomplished by swapping
+   * pairs of blocks in-place.  Within a DCT block, we perform horizontal
+   * mirroring by changing the signs of odd-numbered columns.
+   * Partial iMCUs at the right edge are left untouched.
+   */
+  MCU_cols = srcinfo->output_width /
+    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    for (blk_y = 0; blk_y < compptr->height_in_blocks;
+	 blk_y += compptr->v_samp_factor) {
+      buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	/* Do the mirroring */
+	for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) {
+	  ptr1 = buffer[offset_y][blk_x];
+	  ptr2 = buffer[offset_y][comp_width - blk_x - 1];
+	  /* this unrolled loop doesn't need to know which row it's on... */
+	  for (k = 0; k < DCTSIZE2; k += 2) {
+	    temp1 = *ptr1;	/* swap even column */
+	    temp2 = *ptr2;
+	    *ptr1++ = temp2;
+	    *ptr2++ = temp1;
+	    temp1 = *ptr1;	/* swap odd column with sign change */
+	    temp2 = *ptr2;
+	    *ptr1++ = -temp2;
+	    *ptr2++ = -temp1;
+	  }
+	}
+	if (x_crop_blocks > 0) {
+	  /* Now left-justify the portion of the data to be kept.
+	   * We can't use a single jcopy_block_row() call because that routine
+	   * depends on memcpy(), whose behavior is unspecified for overlapping
+	   * source and destination areas.  Sigh.
+	   */
+	  for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) {
+	    jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks,
+			    buffer[offset_y] + blk_x,
+			    (JDIMENSION) 1);
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	   JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	   jvirt_barray_ptr *src_coef_arrays,
+	   jvirt_barray_ptr *dst_coef_arrays)
+/* Horizontal flip in general cropping case */
+{
+  JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, k, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JBLOCKROW src_row_ptr, dst_row_ptr;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Here we must output into a separate array because we can't touch
+   * different rows of a single virtual array simultaneously.  Otherwise,
+   * this is essentially the same as the routine above.
+   */
+  MCU_cols = srcinfo->output_width /
+    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      src_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	 dst_blk_y + y_crop_blocks,
+	 (JDIMENSION) compptr->v_samp_factor, FALSE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	dst_row_ptr = dst_buffer[offset_y];
+	src_row_ptr = src_buffer[offset_y];
+	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
+	  if (x_crop_blocks + dst_blk_x < comp_width) {
+	    /* Do the mirrorable blocks */
+	    dst_ptr = dst_row_ptr[dst_blk_x];
+	    src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+	    /* this unrolled loop doesn't need to know which row it's on... */
+	    for (k = 0; k < DCTSIZE2; k += 2) {
+	      *dst_ptr++ = *src_ptr++;	 /* copy even column */
+	      *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */
+	    }
+	  } else {
+	    /* Copy last partial block(s) verbatim */
+	    jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks,
+			    dst_row_ptr + dst_blk_x,
+			    (JDIMENSION) 1);
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	   JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	   jvirt_barray_ptr *src_coef_arrays,
+	   jvirt_barray_ptr *dst_coef_arrays)
+/* Vertical flip */
+{
+  JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JBLOCKROW src_row_ptr, dst_row_ptr;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* We output into a separate array because we can't touch different
+   * rows of the source virtual array simultaneously.  Otherwise, this
+   * is a pretty straightforward analog of horizontal flip.
+   * Within a DCT block, vertical mirroring is done by changing the signs
+   * of odd-numbered rows.
+   * Partial iMCUs at the bottom edge are copied verbatim.
+   */
+  MCU_rows = srcinfo->output_height /
+    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      if (y_crop_blocks + dst_blk_y < comp_height) {
+	/* Row is within the mirrorable area. */
+	src_buffer = (*srcinfo->mem->access_virt_barray)
+	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	   comp_height - y_crop_blocks - dst_blk_y -
+	   (JDIMENSION) compptr->v_samp_factor,
+	   (JDIMENSION) compptr->v_samp_factor, FALSE);
+      } else {
+	/* Bottom-edge blocks will be copied verbatim. */
+	src_buffer = (*srcinfo->mem->access_virt_barray)
+	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	   dst_blk_y + y_crop_blocks,
+	   (JDIMENSION) compptr->v_samp_factor, FALSE);
+      }
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	if (y_crop_blocks + dst_blk_y < comp_height) {
+	  /* Row is within the mirrorable area. */
+	  dst_row_ptr = dst_buffer[offset_y];
+	  src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
+	  src_row_ptr += x_crop_blocks;
+	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+	       dst_blk_x++) {
+	    dst_ptr = dst_row_ptr[dst_blk_x];
+	    src_ptr = src_row_ptr[dst_blk_x];
+	    for (i = 0; i < DCTSIZE; i += 2) {
+	      /* copy even row */
+	      for (j = 0; j < DCTSIZE; j++)
+		*dst_ptr++ = *src_ptr++;
+	      /* copy odd row with sign change */
+	      for (j = 0; j < DCTSIZE; j++)
+		*dst_ptr++ = - *src_ptr++;
+	    }
+	  }
+	} else {
+	  /* Just copy row verbatim. */
+	  jcopy_block_row(src_buffer[offset_y] + x_crop_blocks,
+			  dst_buffer[offset_y],
+			  compptr->width_in_blocks);
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	      JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	      jvirt_barray_ptr *src_coef_arrays,
+	      jvirt_barray_ptr *dst_coef_arrays)
+/* Transpose source into destination */
+{
+  JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_x, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Transposing pixels within a block just requires transposing the
+   * DCT coefficients.
+   * Partial iMCUs at the edges require no special treatment; we simply
+   * process all the available DCT blocks for every component.
+   */
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+	     dst_blk_x += compptr->h_samp_factor) {
+	  src_buffer = (*srcinfo->mem->access_virt_barray)
+	    ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	     dst_blk_x + x_crop_blocks,
+	     (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
+	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+	    src_ptr = src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks];
+	    for (i = 0; i < DCTSIZE; i++)
+	      for (j = 0; j < DCTSIZE; j++)
+		dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	   JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	   jvirt_barray_ptr *src_coef_arrays,
+	   jvirt_barray_ptr *dst_coef_arrays)
+/* 90 degree rotation is equivalent to
+ *   1. Transposing the image;
+ *   2. Horizontal mirroring.
+ * These two steps are merged into a single processing routine.
+ */
+{
+  JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_x, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Because of the horizontal mirror step, we can't process partial iMCUs
+   * at the (output) right edge properly.  They just get transposed and
+   * not mirrored.
+   */
+  MCU_cols = srcinfo->output_height /
+    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+	     dst_blk_x += compptr->h_samp_factor) {
+	  if (x_crop_blocks + dst_blk_x < comp_width) {
+	    /* Block is within the mirrorable area. */
+	    src_buffer = (*srcinfo->mem->access_virt_barray)
+	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	       comp_width - x_crop_blocks - dst_blk_x -
+	       (JDIMENSION) compptr->h_samp_factor,
+	       (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  } else {
+	    /* Edge blocks are transposed but not mirrored. */
+	    src_buffer = (*srcinfo->mem->access_virt_barray)
+	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	       dst_blk_x + x_crop_blocks,
+	       (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  }
+	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
+	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+	    if (x_crop_blocks + dst_blk_x < comp_width) {
+	      /* Block is within the mirrorable area. */
+	      src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+		[dst_blk_y + offset_y + y_crop_blocks];
+	      for (i = 0; i < DCTSIZE; i++) {
+		for (j = 0; j < DCTSIZE; j++)
+		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+		i++;
+		for (j = 0; j < DCTSIZE; j++)
+		  dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
+	      }
+	    } else {
+	      /* Edge blocks are transposed but not mirrored. */
+	      src_ptr = src_buffer[offset_x]
+		[dst_blk_y + offset_y + y_crop_blocks];
+	      for (i = 0; i < DCTSIZE; i++)
+		for (j = 0; j < DCTSIZE; j++)
+		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+	    }
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	    JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	    jvirt_barray_ptr *src_coef_arrays,
+	    jvirt_barray_ptr *dst_coef_arrays)
+/* 270 degree rotation is equivalent to
+ *   1. Horizontal mirroring;
+ *   2. Transposing the image.
+ * These two steps are merged into a single processing routine.
+ */
+{
+  JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_x, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  /* Because of the horizontal mirror step, we can't process partial iMCUs
+   * at the (output) bottom edge properly.  They just get transposed and
+   * not mirrored.
+   */
+  MCU_rows = srcinfo->output_width /
+    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+	     dst_blk_x += compptr->h_samp_factor) {
+	  src_buffer = (*srcinfo->mem->access_virt_barray)
+	    ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	     dst_blk_x + x_crop_blocks,
+	     (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
+	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+	    if (y_crop_blocks + dst_blk_y < comp_height) {
+	      /* Block is within the mirrorable area. */
+	      src_ptr = src_buffer[offset_x]
+		[comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
+	      for (i = 0; i < DCTSIZE; i++) {
+		for (j = 0; j < DCTSIZE; j++) {
+		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+		  j++;
+		  dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
+		}
+	      }
+	    } else {
+	      /* Edge blocks are transposed but not mirrored. */
+	      src_ptr = src_buffer[offset_x]
+		[dst_blk_y + offset_y + y_crop_blocks];
+	      for (i = 0; i < DCTSIZE; i++)
+		for (j = 0; j < DCTSIZE; j++)
+		  dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+	    }
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	    JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	    jvirt_barray_ptr *src_coef_arrays,
+	    jvirt_barray_ptr *dst_coef_arrays)
+/* 180 degree rotation is equivalent to
+ *   1. Vertical mirroring;
+ *   2. Horizontal mirroring.
+ * These two steps are merged into a single processing routine.
+ */
+{
+  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JBLOCKROW src_row_ptr, dst_row_ptr;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  MCU_cols = srcinfo->output_width /
+    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
+  MCU_rows = srcinfo->output_height /
+    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      if (y_crop_blocks + dst_blk_y < comp_height) {
+	/* Row is within the vertically mirrorable area. */
+	src_buffer = (*srcinfo->mem->access_virt_barray)
+	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	   comp_height - y_crop_blocks - dst_blk_y -
+	   (JDIMENSION) compptr->v_samp_factor,
+	   (JDIMENSION) compptr->v_samp_factor, FALSE);
+      } else {
+	/* Bottom-edge rows are only mirrored horizontally. */
+	src_buffer = (*srcinfo->mem->access_virt_barray)
+	  ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	   dst_blk_y + y_crop_blocks,
+	   (JDIMENSION) compptr->v_samp_factor, FALSE);
+      }
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	dst_row_ptr = dst_buffer[offset_y];
+	if (y_crop_blocks + dst_blk_y < comp_height) {
+	  /* Row is within the mirrorable area. */
+	  src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1];
+	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
+	    dst_ptr = dst_row_ptr[dst_blk_x];
+	    if (x_crop_blocks + dst_blk_x < comp_width) {
+	      /* Process the blocks that can be mirrored both ways. */
+	      src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+	      for (i = 0; i < DCTSIZE; i += 2) {
+		/* For even row, negate every odd column. */
+		for (j = 0; j < DCTSIZE; j += 2) {
+		  *dst_ptr++ = *src_ptr++;
+		  *dst_ptr++ = - *src_ptr++;
+		}
+		/* For odd row, negate every even column. */
+		for (j = 0; j < DCTSIZE; j += 2) {
+		  *dst_ptr++ = - *src_ptr++;
+		  *dst_ptr++ = *src_ptr++;
+		}
+	      }
+	    } else {
+	      /* Any remaining right-edge blocks are only mirrored vertically. */
+	      src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x];
+	      for (i = 0; i < DCTSIZE; i += 2) {
+		for (j = 0; j < DCTSIZE; j++)
+		  *dst_ptr++ = *src_ptr++;
+		for (j = 0; j < DCTSIZE; j++)
+		  *dst_ptr++ = - *src_ptr++;
+	      }
+	    }
+	  }
+	} else {
+	  /* Remaining rows are just mirrored horizontally. */
+	  src_row_ptr = src_buffer[offset_y];
+	  for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) {
+	    if (x_crop_blocks + dst_blk_x < comp_width) {
+	      /* Process the blocks that can be mirrored. */
+	      dst_ptr = dst_row_ptr[dst_blk_x];
+	      src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1];
+	      for (i = 0; i < DCTSIZE2; i += 2) {
+		*dst_ptr++ = *src_ptr++;
+		*dst_ptr++ = - *src_ptr++;
+	      }
+	    } else {
+	      /* Any remaining right-edge blocks are only copied. */
+	      jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks,
+			      dst_row_ptr + dst_blk_x,
+			      (JDIMENSION) 1);
+	    }
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+LOCAL(void)
+do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	       JDIMENSION x_crop_offset, JDIMENSION y_crop_offset,
+	       jvirt_barray_ptr *src_coef_arrays,
+	       jvirt_barray_ptr *dst_coef_arrays)
+/* Transverse transpose is equivalent to
+ *   1. 180 degree rotation;
+ *   2. Transposition;
+ * or
+ *   1. Horizontal mirroring;
+ *   2. Transposition;
+ *   3. Horizontal mirroring.
+ * These steps are merged into a single processing routine.
+ */
+{
+  JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y;
+  JDIMENSION x_crop_blocks, y_crop_blocks;
+  int ci, i, j, offset_x, offset_y;
+  JBLOCKARRAY src_buffer, dst_buffer;
+  JCOEFPTR src_ptr, dst_ptr;
+  jpeg_component_info *compptr;
+
+  MCU_cols = srcinfo->output_height /
+    (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size);
+  MCU_rows = srcinfo->output_width /
+    (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size);
+
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    comp_width = MCU_cols * compptr->h_samp_factor;
+    comp_height = MCU_rows * compptr->v_samp_factor;
+    x_crop_blocks = x_crop_offset * compptr->h_samp_factor;
+    y_crop_blocks = y_crop_offset * compptr->v_samp_factor;
+    for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks;
+	 dst_blk_y += compptr->v_samp_factor) {
+      dst_buffer = (*srcinfo->mem->access_virt_barray)
+	((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y,
+	 (JDIMENSION) compptr->v_samp_factor, TRUE);
+      for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) {
+	for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks;
+	     dst_blk_x += compptr->h_samp_factor) {
+	  if (x_crop_blocks + dst_blk_x < comp_width) {
+	    /* Block is within the mirrorable area. */
+	    src_buffer = (*srcinfo->mem->access_virt_barray)
+	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	       comp_width - x_crop_blocks - dst_blk_x -
+	       (JDIMENSION) compptr->h_samp_factor,
+	       (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  } else {
+	    src_buffer = (*srcinfo->mem->access_virt_barray)
+	      ((j_common_ptr) srcinfo, src_coef_arrays[ci],
+	       dst_blk_x + x_crop_blocks,
+	       (JDIMENSION) compptr->h_samp_factor, FALSE);
+	  }
+	  for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) {
+	    dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x];
+	    if (y_crop_blocks + dst_blk_y < comp_height) {
+	      if (x_crop_blocks + dst_blk_x < comp_width) {
+		/* Block is within the mirrorable area. */
+		src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+		  [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
+		for (i = 0; i < DCTSIZE; i++) {
+		  for (j = 0; j < DCTSIZE; j++) {
+		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+		    j++;
+		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
+		  }
+		  i++;
+		  for (j = 0; j < DCTSIZE; j++) {
+		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
+		    j++;
+		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+		  }
+		}
+	      } else {
+		/* Right-edge blocks are mirrored in y only */
+		src_ptr = src_buffer[offset_x]
+		  [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1];
+		for (i = 0; i < DCTSIZE; i++) {
+		  for (j = 0; j < DCTSIZE; j++) {
+		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+		    j++;
+		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
+		  }
+		}
+	      }
+	    } else {
+	      if (x_crop_blocks + dst_blk_x < comp_width) {
+		/* Bottom-edge blocks are mirrored in x only */
+		src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1]
+		  [dst_blk_y + offset_y + y_crop_blocks];
+		for (i = 0; i < DCTSIZE; i++) {
+		  for (j = 0; j < DCTSIZE; j++)
+		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+		  i++;
+		  for (j = 0; j < DCTSIZE; j++)
+		    dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j];
+		}
+	      } else {
+		/* At lower right corner, just transpose, no mirroring */
+		src_ptr = src_buffer[offset_x]
+		  [dst_blk_y + offset_y + y_crop_blocks];
+		for (i = 0; i < DCTSIZE; i++)
+		  for (j = 0; j < DCTSIZE; j++)
+		    dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j];
+	      }
+	    }
+	  }
+	}
+      }
+    }
+  }
+}
+
+
+/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec.
+ * Returns TRUE if valid integer found, FALSE if not.
+ * *strptr is advanced over the digit string, and *result is set to its value.
+ */
+
+LOCAL(boolean)
+jt_read_integer (const char ** strptr, JDIMENSION * result)
+{
+  const char * ptr = *strptr;
+  JDIMENSION val = 0;
+
+  for (; isdigit(*ptr); ptr++) {
+    val = val * 10 + (JDIMENSION) (*ptr - '0');
+  }
+  *result = val;
+  if (ptr == *strptr)
+    return FALSE;		/* oops, no digits */
+  *strptr = ptr;
+  return TRUE;
+}
+
+
+/* Parse a crop specification (written in X11 geometry style).
+ * The routine returns TRUE if the spec string is valid, FALSE if not.
+ *
+ * The crop spec string should have the format
+ *	<width>[f]x<height>[f]{+-}<xoffset>{+-}<yoffset>
+ * where width, height, xoffset, and yoffset are unsigned integers.
+ * Each of the elements can be omitted to indicate a default value.
+ * (A weakness of this style is that it is not possible to omit xoffset
+ * while specifying yoffset, since they look alike.)
+ *
+ * This code is loosely based on XParseGeometry from the X11 distribution.
+ */
+
+GLOBAL(boolean)
+jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec)
+{
+  info->crop = FALSE;
+  info->crop_width_set = JCROP_UNSET;
+  info->crop_height_set = JCROP_UNSET;
+  info->crop_xoffset_set = JCROP_UNSET;
+  info->crop_yoffset_set = JCROP_UNSET;
+
+  if (isdigit(*spec)) {
+    /* fetch width */
+    if (! jt_read_integer(&spec, &info->crop_width))
+      return FALSE;
+    if (*spec == 'f' || *spec == 'F') {
+      spec++;
+      info->crop_width_set = JCROP_FORCE;
+    } else
+      info->crop_width_set = JCROP_POS;
+  }
+  if (*spec == 'x' || *spec == 'X') {
+    /* fetch height */
+    spec++;
+    if (! jt_read_integer(&spec, &info->crop_height))
+      return FALSE;
+    if (*spec == 'f' || *spec == 'F') {
+      spec++;
+      info->crop_height_set = JCROP_FORCE;
+    } else
+      info->crop_height_set = JCROP_POS;
+  }
+  if (*spec == '+' || *spec == '-') {
+    /* fetch xoffset */
+    info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS;
+    spec++;
+    if (! jt_read_integer(&spec, &info->crop_xoffset))
+      return FALSE;
+  }
+  if (*spec == '+' || *spec == '-') {
+    /* fetch yoffset */
+    info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS;
+    spec++;
+    if (! jt_read_integer(&spec, &info->crop_yoffset))
+      return FALSE;
+  }
+  /* We had better have gotten to the end of the string. */
+  if (*spec != '\0')
+    return FALSE;
+  info->crop = TRUE;
+  return TRUE;
+}
+
+
+/* Trim off any partial iMCUs on the indicated destination edge */
+
+LOCAL(void)
+trim_right_edge (jpeg_transform_info *info, JDIMENSION full_width)
+{
+  JDIMENSION MCU_cols;
+
+  MCU_cols = info->output_width / info->iMCU_sample_width;
+  if (MCU_cols > 0 && info->x_crop_offset + MCU_cols ==
+      full_width / info->iMCU_sample_width)
+    info->output_width = MCU_cols * info->iMCU_sample_width;
+}
+
+LOCAL(void)
+trim_bottom_edge (jpeg_transform_info *info, JDIMENSION full_height)
+{
+  JDIMENSION MCU_rows;
+
+  MCU_rows = info->output_height / info->iMCU_sample_height;
+  if (MCU_rows > 0 && info->y_crop_offset + MCU_rows ==
+      full_height / info->iMCU_sample_height)
+    info->output_height = MCU_rows * info->iMCU_sample_height;
+}
+
+
+/* Request any required workspace.
+ *
+ * This routine figures out the size that the output image will be
+ * (which implies that all the transform parameters must be set before
+ * it is called).
+ *
+ * We allocate the workspace virtual arrays from the source decompression
+ * object, so that all the arrays (both the original data and the workspace)
+ * will be taken into account while making memory management decisions.
+ * Hence, this routine must be called after jpeg_read_header (which reads
+ * the image dimensions) and before jpeg_read_coefficients (which realizes
+ * the source's virtual arrays).
+ *
+ * This function returns FALSE right away if -perfect is given
+ * and transformation is not perfect.  Otherwise returns TRUE.
+ */
+
+GLOBAL(boolean)
+jtransform_request_workspace (j_decompress_ptr srcinfo,
+			      jpeg_transform_info *info)
+{
+  jvirt_barray_ptr *coef_arrays;
+  boolean need_workspace, transpose_it;
+  jpeg_component_info *compptr;
+  JDIMENSION xoffset, yoffset;
+  JDIMENSION width_in_iMCUs, height_in_iMCUs;
+  JDIMENSION width_in_blocks, height_in_blocks;
+  int ci, h_samp_factor, v_samp_factor;
+
+  /* Determine number of components in output image */
+  if (info->force_grayscale &&
+      (srcinfo->jpeg_color_space == JCS_YCbCr ||
+       srcinfo->jpeg_color_space == JCS_BG_YCC) &&
+      srcinfo->num_components == 3)
+    /* We'll only process the first component */
+    info->num_components = 1;
+  else
+    /* Process all the components */
+    info->num_components = srcinfo->num_components;
+
+  /* Compute output image dimensions and related values. */
+  jpeg_core_output_dimensions(srcinfo);
+
+  /* Return right away if -perfect is given and transformation is not perfect.
+   */
+  if (info->perfect) {
+    if (info->num_components == 1) {
+      if (!jtransform_perfect_transform(srcinfo->output_width,
+	  srcinfo->output_height,
+	  srcinfo->min_DCT_h_scaled_size,
+	  srcinfo->min_DCT_v_scaled_size,
+	  info->transform))
+	return FALSE;
+    } else {
+      if (!jtransform_perfect_transform(srcinfo->output_width,
+	  srcinfo->output_height,
+	  srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size,
+	  srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size,
+	  info->transform))
+	return FALSE;
+    }
+  }
+
+  /* If there is only one output component, force the iMCU size to be 1;
+   * else use the source iMCU size.  (This allows us to do the right thing
+   * when reducing color to grayscale, and also provides a handy way of
+   * cleaning up "funny" grayscale images whose sampling factors are not 1x1.)
+   */
+  switch (info->transform) {
+  case JXFORM_TRANSPOSE:
+  case JXFORM_TRANSVERSE:
+  case JXFORM_ROT_90:
+  case JXFORM_ROT_270:
+    info->output_width = srcinfo->output_height;
+    info->output_height = srcinfo->output_width;
+    if (info->num_components == 1) {
+      info->iMCU_sample_width = srcinfo->min_DCT_v_scaled_size;
+      info->iMCU_sample_height = srcinfo->min_DCT_h_scaled_size;
+    } else {
+      info->iMCU_sample_width =
+	srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size;
+      info->iMCU_sample_height =
+	srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size;
+    }
+    break;
+  default:
+    info->output_width = srcinfo->output_width;
+    info->output_height = srcinfo->output_height;
+    if (info->num_components == 1) {
+      info->iMCU_sample_width = srcinfo->min_DCT_h_scaled_size;
+      info->iMCU_sample_height = srcinfo->min_DCT_v_scaled_size;
+    } else {
+      info->iMCU_sample_width =
+	srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size;
+      info->iMCU_sample_height =
+	srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size;
+    }
+    break;
+  }
+
+  /* If cropping has been requested, compute the crop area's position and
+   * dimensions, ensuring that its upper left corner falls at an iMCU boundary.
+   */
+  if (info->crop) {
+    /* Insert default values for unset crop parameters */
+    if (info->crop_xoffset_set == JCROP_UNSET)
+      info->crop_xoffset = 0;	/* default to +0 */
+    if (info->crop_yoffset_set == JCROP_UNSET)
+      info->crop_yoffset = 0;	/* default to +0 */
+    if (info->crop_width_set == JCROP_UNSET) {
+      if (info->crop_xoffset >= info->output_width)
+	ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+      info->crop_width = info->output_width - info->crop_xoffset;
+    } else {
+      /* Check for crop extension */
+      if (info->crop_width > info->output_width) {
+	/* Crop extension does not work when transforming! */
+	if (info->transform != JXFORM_NONE ||
+	    info->crop_xoffset >= info->crop_width ||
+	    info->crop_xoffset > info->crop_width - info->output_width)
+	  ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+      } else {
+	if (info->crop_xoffset >= info->output_width ||
+	    info->crop_width <= 0 ||
+	    info->crop_xoffset > info->output_width - info->crop_width)
+	  ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+      }
+    }
+    if (info->crop_height_set == JCROP_UNSET) {
+      if (info->crop_yoffset >= info->output_height)
+	ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+      info->crop_height = info->output_height - info->crop_yoffset;
+    } else {
+      /* Check for crop extension */
+      if (info->crop_height > info->output_height) {
+	/* Crop extension does not work when transforming! */
+	if (info->transform != JXFORM_NONE ||
+	    info->crop_yoffset >= info->crop_height ||
+	    info->crop_yoffset > info->crop_height - info->output_height)
+	  ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+      } else {
+	if (info->crop_yoffset >= info->output_height ||
+	    info->crop_height <= 0 ||
+	    info->crop_yoffset > info->output_height - info->crop_height)
+	  ERREXIT(srcinfo, JERR_BAD_CROP_SPEC);
+      }
+    }
+    /* Convert negative crop offsets into regular offsets */
+    if (info->crop_xoffset_set != JCROP_NEG)
+      xoffset = info->crop_xoffset;
+    else if (info->crop_width > info->output_width) /* crop extension */
+      xoffset = info->crop_width - info->output_width - info->crop_xoffset;
+    else
+      xoffset = info->output_width - info->crop_width - info->crop_xoffset;
+    if (info->crop_yoffset_set != JCROP_NEG)
+      yoffset = info->crop_yoffset;
+    else if (info->crop_height > info->output_height) /* crop extension */
+      yoffset = info->crop_height - info->output_height - info->crop_yoffset;
+    else
+      yoffset = info->output_height - info->crop_height - info->crop_yoffset;
+    /* Now adjust so that upper left corner falls at an iMCU boundary */
+    if (info->transform == JXFORM_WIPE) {
+      /* Ensure the effective wipe region will cover the requested */
+      info->drop_width = (JDIMENSION) jdiv_round_up
+	((long) (info->crop_width + (xoffset % info->iMCU_sample_width)),
+	 (long) info->iMCU_sample_width);
+      info->drop_height = (JDIMENSION) jdiv_round_up
+	((long) (info->crop_height + (yoffset % info->iMCU_sample_height)),
+	 (long) info->iMCU_sample_height);
+    } else {
+      /* Ensure the effective crop region will cover the requested */
+      if (info->crop_width_set == JCROP_FORCE ||
+	  info->crop_width > info->output_width)
+	info->output_width = info->crop_width;
+      else
+	info->output_width =
+	  info->crop_width + (xoffset % info->iMCU_sample_width);
+      if (info->crop_height_set == JCROP_FORCE ||
+	  info->crop_height > info->output_height)
+	info->output_height = info->crop_height;
+      else
+	info->output_height =
+	  info->crop_height + (yoffset % info->iMCU_sample_height);
+    }
+    /* Save x/y offsets measured in iMCUs */
+    info->x_crop_offset = xoffset / info->iMCU_sample_width;
+    info->y_crop_offset = yoffset / info->iMCU_sample_height;
+  } else {
+    info->x_crop_offset = 0;
+    info->y_crop_offset = 0;
+  }
+
+  /* Figure out whether we need workspace arrays,
+   * and if so whether they are transposed relative to the source.
+   */
+  need_workspace = FALSE;
+  transpose_it = FALSE;
+  switch (info->transform) {
+  case JXFORM_NONE:
+    if (info->x_crop_offset != 0 || info->y_crop_offset != 0 ||
+	info->output_width > srcinfo->output_width ||
+	info->output_height > srcinfo->output_height)
+      need_workspace = TRUE;
+    /* No workspace needed if neither cropping nor transforming */
+    break;
+  case JXFORM_FLIP_H:
+    if (info->trim)
+      trim_right_edge(info, srcinfo->output_width);
+    if (info->y_crop_offset != 0)
+      need_workspace = TRUE;
+    /* do_flip_h_no_crop doesn't need a workspace array */
+    break;
+  case JXFORM_FLIP_V:
+    if (info->trim)
+      trim_bottom_edge(info, srcinfo->output_height);
+    /* Need workspace arrays having same dimensions as source image. */
+    need_workspace = TRUE;
+    break;
+  case JXFORM_TRANSPOSE:
+    /* transpose does NOT have to trim anything */
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  case JXFORM_TRANSVERSE:
+    if (info->trim) {
+      trim_right_edge(info, srcinfo->output_height);
+      trim_bottom_edge(info, srcinfo->output_width);
+    }
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  case JXFORM_ROT_90:
+    if (info->trim)
+      trim_right_edge(info, srcinfo->output_height);
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  case JXFORM_ROT_180:
+    if (info->trim) {
+      trim_right_edge(info, srcinfo->output_width);
+      trim_bottom_edge(info, srcinfo->output_height);
+    }
+    /* Need workspace arrays having same dimensions as source image. */
+    need_workspace = TRUE;
+    break;
+  case JXFORM_ROT_270:
+    if (info->trim)
+      trim_bottom_edge(info, srcinfo->output_width);
+    /* Need workspace arrays having transposed dimensions. */
+    need_workspace = TRUE;
+    transpose_it = TRUE;
+    break;
+  case JXFORM_WIPE:
+    break;
+  }
+
+  /* Allocate workspace if needed.
+   * Note that we allocate arrays padded out to the next iMCU boundary,
+   * so that transform routines need not worry about missing edge blocks.
+   */
+  if (need_workspace) {
+    coef_arrays = (jvirt_barray_ptr *)
+      (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE,
+	SIZEOF(jvirt_barray_ptr) * info->num_components);
+    width_in_iMCUs = (JDIMENSION)
+      jdiv_round_up((long) info->output_width,
+		    (long) info->iMCU_sample_width);
+    height_in_iMCUs = (JDIMENSION)
+      jdiv_round_up((long) info->output_height,
+		    (long) info->iMCU_sample_height);
+    for (ci = 0; ci < info->num_components; ci++) {
+      compptr = srcinfo->comp_info + ci;
+      if (info->num_components == 1) {
+	/* we're going to force samp factors to 1x1 in this case */
+	h_samp_factor = v_samp_factor = 1;
+      } else if (transpose_it) {
+	h_samp_factor = compptr->v_samp_factor;
+	v_samp_factor = compptr->h_samp_factor;
+      } else {
+	h_samp_factor = compptr->h_samp_factor;
+	v_samp_factor = compptr->v_samp_factor;
+      }
+      width_in_blocks = width_in_iMCUs * h_samp_factor;
+      height_in_blocks = height_in_iMCUs * v_samp_factor;
+      coef_arrays[ci] = (*srcinfo->mem->request_virt_barray)
+	((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE,
+	 width_in_blocks, height_in_blocks, (JDIMENSION) v_samp_factor);
+    }
+    info->workspace_coef_arrays = coef_arrays;
+  } else
+    info->workspace_coef_arrays = NULL;
+
+  return TRUE;
+}
+
+
+/* Transpose destination image parameters */
+
+LOCAL(void)
+transpose_critical_parameters (j_compress_ptr dstinfo)
+{
+  int tblno, i, j, ci, itemp;
+  jpeg_component_info *compptr;
+  JQUANT_TBL *qtblptr;
+  JDIMENSION jtemp;
+  UINT16 qtemp;
+
+  /* Transpose image dimensions */
+  jtemp = dstinfo->image_width;
+  dstinfo->image_width = dstinfo->image_height;
+  dstinfo->image_height = jtemp;
+  itemp = dstinfo->min_DCT_h_scaled_size;
+  dstinfo->min_DCT_h_scaled_size = dstinfo->min_DCT_v_scaled_size;
+  dstinfo->min_DCT_v_scaled_size = itemp;
+
+  /* Transpose sampling factors */
+  for (ci = 0; ci < dstinfo->num_components; ci++) {
+    compptr = dstinfo->comp_info + ci;
+    itemp = compptr->h_samp_factor;
+    compptr->h_samp_factor = compptr->v_samp_factor;
+    compptr->v_samp_factor = itemp;
+  }
+
+  /* Transpose quantization tables */
+  for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) {
+    qtblptr = dstinfo->quant_tbl_ptrs[tblno];
+    if (qtblptr != NULL) {
+      for (i = 0; i < DCTSIZE; i++) {
+	for (j = 0; j < i; j++) {
+	  qtemp = qtblptr->quantval[i*DCTSIZE+j];
+	  qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i];
+	  qtblptr->quantval[j*DCTSIZE+i] = qtemp;
+	}
+      }
+    }
+  }
+}
+
+
+/* Adjust Exif image parameters.
+ *
+ * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible.
+ */
+
+LOCAL(void)
+adjust_exif_parameters (JOCTET FAR * data, unsigned int length,
+			JDIMENSION new_width, JDIMENSION new_height)
+{
+  boolean is_motorola; /* Flag for byte order */
+  unsigned int number_of_tags, tagnum;
+  unsigned int firstoffset, offset;
+  JDIMENSION new_value;
+
+  if (length < 12) return; /* Length of an IFD entry */
+
+  /* Discover byte order */
+  if (GETJOCTET(data[0]) == 0x49 && GETJOCTET(data[1]) == 0x49)
+    is_motorola = FALSE;
+  else if (GETJOCTET(data[0]) == 0x4D && GETJOCTET(data[1]) == 0x4D)
+    is_motorola = TRUE;
+  else
+    return;
+
+  /* Check Tag Mark */
+  if (is_motorola) {
+    if (GETJOCTET(data[2]) != 0) return;
+    if (GETJOCTET(data[3]) != 0x2A) return;
+  } else {
+    if (GETJOCTET(data[3]) != 0) return;
+    if (GETJOCTET(data[2]) != 0x2A) return;
+  }
+
+  /* Get first IFD offset (offset to IFD0) */
+  if (is_motorola) {
+    if (GETJOCTET(data[4]) != 0) return;
+    if (GETJOCTET(data[5]) != 0) return;
+    firstoffset = GETJOCTET(data[6]);
+    firstoffset <<= 8;
+    firstoffset += GETJOCTET(data[7]);
+  } else {
+    if (GETJOCTET(data[7]) != 0) return;
+    if (GETJOCTET(data[6]) != 0) return;
+    firstoffset = GETJOCTET(data[5]);
+    firstoffset <<= 8;
+    firstoffset += GETJOCTET(data[4]);
+  }
+  if (firstoffset > length - 2) return; /* check end of data segment */
+
+  /* Get the number of directory entries contained in this IFD */
+  if (is_motorola) {
+    number_of_tags = GETJOCTET(data[firstoffset]);
+    number_of_tags <<= 8;
+    number_of_tags += GETJOCTET(data[firstoffset+1]);
+  } else {
+    number_of_tags = GETJOCTET(data[firstoffset+1]);
+    number_of_tags <<= 8;
+    number_of_tags += GETJOCTET(data[firstoffset]);
+  }
+  if (number_of_tags == 0) return;
+  firstoffset += 2;
+
+  /* Search for ExifSubIFD offset Tag in IFD0 */
+  for (;;) {
+    if (firstoffset > length - 12) return; /* check end of data segment */
+    /* Get Tag number */
+    if (is_motorola) {
+      tagnum = GETJOCTET(data[firstoffset]);
+      tagnum <<= 8;
+      tagnum += GETJOCTET(data[firstoffset+1]);
+    } else {
+      tagnum = GETJOCTET(data[firstoffset+1]);
+      tagnum <<= 8;
+      tagnum += GETJOCTET(data[firstoffset]);
+    }
+    if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */
+    if (--number_of_tags == 0) return;
+    firstoffset += 12;
+  }
+
+  /* Get the ExifSubIFD offset */
+  if (is_motorola) {
+    if (GETJOCTET(data[firstoffset+8]) != 0) return;
+    if (GETJOCTET(data[firstoffset+9]) != 0) return;
+    offset = GETJOCTET(data[firstoffset+10]);
+    offset <<= 8;
+    offset += GETJOCTET(data[firstoffset+11]);
+  } else {
+    if (GETJOCTET(data[firstoffset+11]) != 0) return;
+    if (GETJOCTET(data[firstoffset+10]) != 0) return;
+    offset = GETJOCTET(data[firstoffset+9]);
+    offset <<= 8;
+    offset += GETJOCTET(data[firstoffset+8]);
+  }
+  if (offset > length - 2) return; /* check end of data segment */
+
+  /* Get the number of directory entries contained in this SubIFD */
+  if (is_motorola) {
+    number_of_tags = GETJOCTET(data[offset]);
+    number_of_tags <<= 8;
+    number_of_tags += GETJOCTET(data[offset+1]);
+  } else {
+    number_of_tags = GETJOCTET(data[offset+1]);
+    number_of_tags <<= 8;
+    number_of_tags += GETJOCTET(data[offset]);
+  }
+  if (number_of_tags < 2) return;
+  offset += 2;
+
+  /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */
+  do {
+    if (offset > length - 12) return; /* check end of data segment */
+    /* Get Tag number */
+    if (is_motorola) {
+      tagnum = GETJOCTET(data[offset]);
+      tagnum <<= 8;
+      tagnum += GETJOCTET(data[offset+1]);
+    } else {
+      tagnum = GETJOCTET(data[offset+1]);
+      tagnum <<= 8;
+      tagnum += GETJOCTET(data[offset]);
+    }
+    if (tagnum == 0xA002 || tagnum == 0xA003) {
+      if (tagnum == 0xA002)
+	new_value = new_width; /* ExifImageWidth Tag */
+      else
+	new_value = new_height; /* ExifImageHeight Tag */
+      if (is_motorola) {
+	data[offset+2] = 0; /* Format = unsigned long (4 octets) */
+	data[offset+3] = 4;
+	data[offset+4] = 0; /* Number Of Components = 1 */
+	data[offset+5] = 0;
+	data[offset+6] = 0;
+	data[offset+7] = 1;
+	data[offset+8] = 0;
+	data[offset+9] = 0;
+	data[offset+10] = (JOCTET)((new_value >> 8) & 0xFF);
+	data[offset+11] = (JOCTET)(new_value & 0xFF);
+      } else {
+	data[offset+2] = 4; /* Format = unsigned long (4 octets) */
+	data[offset+3] = 0;
+	data[offset+4] = 1; /* Number Of Components = 1 */
+	data[offset+5] = 0;
+	data[offset+6] = 0;
+	data[offset+7] = 0;
+	data[offset+8] = (JOCTET)(new_value & 0xFF);
+	data[offset+9] = (JOCTET)((new_value >> 8) & 0xFF);
+	data[offset+10] = 0;
+	data[offset+11] = 0;
+      }
+    }
+    offset += 12;
+  } while (--number_of_tags);
+}
+
+
+/* Adjust output image parameters as needed.
+ *
+ * This must be called after jpeg_copy_critical_parameters()
+ * and before jpeg_write_coefficients().
+ *
+ * The return value is the set of virtual coefficient arrays to be written
+ * (either the ones allocated by jtransform_request_workspace, or the
+ * original source data arrays).  The caller will need to pass this value
+ * to jpeg_write_coefficients().
+ */
+
+GLOBAL(jvirt_barray_ptr *)
+jtransform_adjust_parameters (j_decompress_ptr srcinfo,
+			      j_compress_ptr dstinfo,
+			      jvirt_barray_ptr *src_coef_arrays,
+			      jpeg_transform_info *info)
+{
+  /* If force-to-grayscale is requested, adjust destination parameters */
+  if (info->force_grayscale) {
+    /* First, ensure we have YCC or grayscale data, and that the source's
+     * Y channel is full resolution.  (No reasonable person would make Y
+     * be less than full resolution, so actually coping with that case
+     * isn't worth extra code space.  But we check it to avoid crashing.)
+     */
+    if ((((dstinfo->jpeg_color_space == JCS_YCbCr ||
+	   dstinfo->jpeg_color_space == JCS_BG_YCC) &&
+	  dstinfo->num_components == 3) ||
+	 (dstinfo->jpeg_color_space == JCS_GRAYSCALE &&
+	  dstinfo->num_components == 1)) &&
+	srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor &&
+	srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) {
+      /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed
+       * properly.  Among other things, it sets the target h_samp_factor &
+       * v_samp_factor to 1, which typically won't match the source.
+       * We have to preserve the source's quantization table number, however.
+       */
+      int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no;
+      jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE);
+      dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no;
+    } else {
+      /* Sorry, can't do it */
+      ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL);
+    }
+  } else if (info->num_components == 1) {
+    /* For a single-component source, we force the destination sampling factors
+     * to 1x1, with or without force_grayscale.  This is useful because some
+     * decoders choke on grayscale images with other sampling factors.
+     */
+    dstinfo->comp_info[0].h_samp_factor = 1;
+    dstinfo->comp_info[0].v_samp_factor = 1;
+  }
+
+  /* Correct the destination's image dimensions as necessary
+   * for rotate/flip, resize, and crop operations.
+   */
+  dstinfo->jpeg_width = info->output_width;
+  dstinfo->jpeg_height = info->output_height;
+
+  /* Transpose destination image parameters */
+  switch (info->transform) {
+  case JXFORM_TRANSPOSE:
+  case JXFORM_TRANSVERSE:
+  case JXFORM_ROT_90:
+  case JXFORM_ROT_270:
+    transpose_critical_parameters(dstinfo);
+    break;
+  default:
+    break;
+  }
+
+  /* Adjust Exif properties */
+  if (srcinfo->marker_list != NULL &&
+      srcinfo->marker_list->marker == JPEG_APP0+1 &&
+      srcinfo->marker_list->data_length >= 6 &&
+      GETJOCTET(srcinfo->marker_list->data[0]) == 0x45 &&
+      GETJOCTET(srcinfo->marker_list->data[1]) == 0x78 &&
+      GETJOCTET(srcinfo->marker_list->data[2]) == 0x69 &&
+      GETJOCTET(srcinfo->marker_list->data[3]) == 0x66 &&
+      GETJOCTET(srcinfo->marker_list->data[4]) == 0 &&
+      GETJOCTET(srcinfo->marker_list->data[5]) == 0) {
+    /* Suppress output of JFIF marker */
+    dstinfo->write_JFIF_header = FALSE;
+    /* Adjust Exif image parameters */
+    if (dstinfo->jpeg_width != srcinfo->image_width ||
+	dstinfo->jpeg_height != srcinfo->image_height)
+      /* Align data segment to start of TIFF structure for parsing */
+      adjust_exif_parameters(srcinfo->marker_list->data + 6,
+	srcinfo->marker_list->data_length - 6,
+	dstinfo->jpeg_width, dstinfo->jpeg_height);
+  }
+
+  /* Return the appropriate output data set */
+  if (info->workspace_coef_arrays != NULL)
+    return info->workspace_coef_arrays;
+  return src_coef_arrays;
+}
+
+
+/* Execute the actual transformation, if any.
+ *
+ * This must be called *after* jpeg_write_coefficients, because it depends
+ * on jpeg_write_coefficients to have computed subsidiary values such as
+ * the per-component width and height fields in the destination object.
+ *
+ * Note that some transformations will modify the source data arrays!
+ */
+
+GLOBAL(void)
+jtransform_execute_transform (j_decompress_ptr srcinfo,
+			      j_compress_ptr dstinfo,
+			      jvirt_barray_ptr *src_coef_arrays,
+			      jpeg_transform_info *info)
+{
+  jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays;
+
+  /* Note: conditions tested here should match those in switch statement
+   * in jtransform_request_workspace()
+   */
+  switch (info->transform) {
+  case JXFORM_NONE:
+    if (info->output_width > srcinfo->output_width ||
+	info->output_height > srcinfo->output_height)
+      do_crop_ext(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+		  src_coef_arrays, dst_coef_arrays);
+    else if (info->x_crop_offset != 0 || info->y_crop_offset != 0)
+      do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	      src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_FLIP_H:
+    if (info->y_crop_offset != 0)
+      do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+		src_coef_arrays, dst_coef_arrays);
+    else
+      do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset,
+			src_coef_arrays);
+    break;
+  case JXFORM_FLIP_V:
+    do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	      src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_TRANSPOSE:
+    do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+		 src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_TRANSVERSE:
+    do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+		  src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_ROT_90:
+    do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	      src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_ROT_180:
+    do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	       src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_ROT_270:
+    do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	       src_coef_arrays, dst_coef_arrays);
+    break;
+  case JXFORM_WIPE:
+    do_wipe(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset,
+	    src_coef_arrays, info->drop_width, info->drop_height);
+    break;
+  }
+}
+
+/* jtransform_perfect_transform
+ *
+ * Determine whether lossless transformation is perfectly
+ * possible for a specified image and transformation.
+ *
+ * Inputs:
+ *   image_width, image_height: source image dimensions.
+ *   MCU_width, MCU_height: pixel dimensions of MCU.
+ *   transform: transformation identifier.
+ * Parameter sources from initialized jpeg_struct
+ * (after reading source header):
+ *   image_width = cinfo.image_width
+ *   image_height = cinfo.image_height
+ *   MCU_width = cinfo.max_h_samp_factor * cinfo.block_size
+ *   MCU_height = cinfo.max_v_samp_factor * cinfo.block_size
+ * Result:
+ *   TRUE = perfect transformation possible
+ *   FALSE = perfect transformation not possible
+ *           (may use custom action then)
+ */
+
+GLOBAL(boolean)
+jtransform_perfect_transform(JDIMENSION image_width, JDIMENSION image_height,
+			     int MCU_width, int MCU_height,
+			     JXFORM_CODE transform)
+{
+  boolean result = TRUE; /* initialize TRUE */
+
+  switch (transform) {
+  case JXFORM_FLIP_H:
+  case JXFORM_ROT_270:
+    if (image_width % (JDIMENSION) MCU_width)
+      result = FALSE;
+    break;
+  case JXFORM_FLIP_V:
+  case JXFORM_ROT_90:
+    if (image_height % (JDIMENSION) MCU_height)
+      result = FALSE;
+    break;
+  case JXFORM_TRANSVERSE:
+  case JXFORM_ROT_180:
+    if (image_width % (JDIMENSION) MCU_width)
+      result = FALSE;
+    if (image_height % (JDIMENSION) MCU_height)
+      result = FALSE;
+    break;
+  default:
+    break;
+  }
+
+  return result;
+}
+
+#endif /* TRANSFORMS_SUPPORTED */
+
+
+/* Setup decompression object to save desired markers in memory.
+ * This must be called before jpeg_read_header() to have the desired effect.
+ */
+
+GLOBAL(void)
+jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option)
+{
+#ifdef SAVE_MARKERS_SUPPORTED
+  int m;
+
+  /* Save comments except under NONE option */
+  if (option != JCOPYOPT_NONE) {
+    jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF);
+  }
+  /* Save all types of APPn markers iff ALL option */
+  if (option == JCOPYOPT_ALL) {
+    for (m = 0; m < 16; m++)
+      jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF);
+  }
+#endif /* SAVE_MARKERS_SUPPORTED */
+}
+
+/* Copy markers saved in the given source object to the destination object.
+ * This should be called just after jpeg_start_compress() or
+ * jpeg_write_coefficients().
+ * Note that those routines will have written the SOI, and also the
+ * JFIF APP0 or Adobe APP14 markers if selected.
+ */
+
+GLOBAL(void)
+jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+		       JCOPY_OPTION option)
+{
+  jpeg_saved_marker_ptr marker;
+
+  /* In the current implementation, we don't actually need to examine the
+   * option flag here; we just copy everything that got saved.
+   * But to avoid confusion, we do not output JFIF and Adobe APP14 markers
+   * if the encoder library already wrote one.
+   */
+  for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) {
+    if (dstinfo->write_JFIF_header &&
+	marker->marker == JPEG_APP0 &&
+	marker->data_length >= 5 &&
+	GETJOCTET(marker->data[0]) == 0x4A &&
+	GETJOCTET(marker->data[1]) == 0x46 &&
+	GETJOCTET(marker->data[2]) == 0x49 &&
+	GETJOCTET(marker->data[3]) == 0x46 &&
+	GETJOCTET(marker->data[4]) == 0)
+      continue;			/* reject duplicate JFIF */
+    if (dstinfo->write_Adobe_marker &&
+	marker->marker == JPEG_APP0+14 &&
+	marker->data_length >= 5 &&
+	GETJOCTET(marker->data[0]) == 0x41 &&
+	GETJOCTET(marker->data[1]) == 0x64 &&
+	GETJOCTET(marker->data[2]) == 0x6F &&
+	GETJOCTET(marker->data[3]) == 0x62 &&
+	GETJOCTET(marker->data[4]) == 0x65)
+      continue;			/* reject duplicate Adobe */
+#ifdef NEED_FAR_POINTERS
+    /* We could use jpeg_write_marker if the data weren't FAR... */
+    {
+      unsigned int i;
+      jpeg_write_m_header(dstinfo, marker->marker, marker->data_length);
+      for (i = 0; i < marker->data_length; i++)
+	jpeg_write_m_byte(dstinfo, marker->data[i]);
+    }
+#else
+    jpeg_write_marker(dstinfo, marker->marker,
+		      marker->data, marker->data_length);
+#endif
+  }
+}
diff --git a/jpeg/90/transupp.h b/jpeg/90/transupp.h
new file mode 100644
index 0000000..eee6931
--- /dev/null
+++ b/jpeg/90/transupp.h
@@ -0,0 +1,219 @@
+/*
+ * transupp.h
+ *
+ * Copyright (C) 1997-2013, Thomas G. Lane, Guido Vollbeding.
+ * This file is part of the Independent JPEG Group's software.
+ * For conditions of distribution and use, see the accompanying README file.
+ *
+ * This file contains declarations for image transformation routines and
+ * other utility code used by the jpegtran sample application.  These are
+ * NOT part of the core JPEG library.  But we keep these routines separate
+ * from jpegtran.c to ease the task of maintaining jpegtran-like programs
+ * that have other user interfaces.
+ *
+ * NOTE: all the routines declared here have very specific requirements
+ * about when they are to be executed during the reading and writing of the
+ * source and destination files.  See the comments in transupp.c, or see
+ * jpegtran.c for an example of correct usage.
+ */
+
+/* If you happen not to want the image transform support, disable it here */
+#ifndef TRANSFORMS_SUPPORTED
+#define TRANSFORMS_SUPPORTED 1		/* 0 disables transform code */
+#endif
+
+/*
+ * Although rotating and flipping data expressed as DCT coefficients is not
+ * hard, there is an asymmetry in the JPEG format specification for images
+ * whose dimensions aren't multiples of the iMCU size.  The right and bottom
+ * image edges are padded out to the next iMCU boundary with junk data; but
+ * no padding is possible at the top and left edges.  If we were to flip
+ * the whole image including the pad data, then pad garbage would become
+ * visible at the top and/or left, and real pixels would disappear into the
+ * pad margins --- perhaps permanently, since encoders & decoders may not
+ * bother to preserve DCT blocks that appear to be completely outside the
+ * nominal image area.  So, we have to exclude any partial iMCUs from the
+ * basic transformation.
+ *
+ * Transpose is the only transformation that can handle partial iMCUs at the
+ * right and bottom edges completely cleanly.  flip_h can flip partial iMCUs
+ * at the bottom, but leaves any partial iMCUs at the right edge untouched.
+ * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched.
+ * The other transforms are defined as combinations of these basic transforms
+ * and process edge blocks in a way that preserves the equivalence.
+ *
+ * The "trim" option causes untransformable partial iMCUs to be dropped;
+ * this is not strictly lossless, but it usually gives the best-looking
+ * result for odd-size images.  Note that when this option is active,
+ * the expected mathematical equivalences between the transforms may not hold.
+ * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim
+ * followed by -rot 180 -trim trims both edges.)
+ *
+ * We also offer a lossless-crop option, which discards data outside a given
+ * image region but losslessly preserves what is inside.  Like the rotate and
+ * flip transforms, lossless crop is restricted by the current JPEG format: the
+ * upper left corner of the selected region must fall on an iMCU boundary.  If
+ * this does not hold for the given crop parameters, we silently move the upper
+ * left corner up and/or left to make it so, simultaneously increasing the
+ * region dimensions to keep the lower right crop corner unchanged.  (Thus, the
+ * output image covers at least the requested region, but may cover more.)
+ * The adjustment of the region dimensions may be optionally disabled.
+ *
+ * A complementary lossless-wipe option is provided to discard (gray out) data
+ * inside a given image region while losslessly preserving what is outside.
+ *
+ * We also provide a lossless-resize option, which is kind of a lossless-crop
+ * operation in the DCT coefficient block domain - it discards higher-order
+ * coefficients and losslessly preserves lower-order coefficients of a
+ * sub-block.
+ *
+ * Rotate/flip transform, resize, and crop can be requested together in a
+ * single invocation.  The crop is applied last --- that is, the crop region
+ * is specified in terms of the destination image after transform/resize.
+ *
+ * We also offer a "force to grayscale" option, which simply discards the
+ * chrominance channels of a YCbCr image.  This is lossless in the sense that
+ * the luminance channel is preserved exactly.  It's not the same kind of
+ * thing as the rotate/flip transformations, but it's convenient to handle it
+ * as part of this package, mainly because the transformation routines have to
+ * be aware of the option to know how many components to work on.
+ */
+
+
+/* Short forms of external names for systems with brain-damaged linkers. */
+
+#ifdef NEED_SHORT_EXTERNAL_NAMES
+#define jtransform_parse_crop_spec	jTrParCrop
+#define jtransform_request_workspace	jTrRequest
+#define jtransform_adjust_parameters	jTrAdjust
+#define jtransform_execute_transform	jTrExec
+#define jtransform_perfect_transform	jTrPerfect
+#define jcopy_markers_setup		jCMrkSetup
+#define jcopy_markers_execute		jCMrkExec
+#endif /* NEED_SHORT_EXTERNAL_NAMES */
+
+
+/*
+ * Codes for supported types of image transformations.
+ */
+
+typedef enum {
+	JXFORM_NONE,		/* no transformation */
+	JXFORM_FLIP_H,		/* horizontal flip */
+	JXFORM_FLIP_V,		/* vertical flip */
+	JXFORM_TRANSPOSE,	/* transpose across UL-to-LR axis */
+	JXFORM_TRANSVERSE,	/* transpose across UR-to-LL axis */
+	JXFORM_ROT_90,		/* 90-degree clockwise rotation */
+	JXFORM_ROT_180,		/* 180-degree rotation */
+	JXFORM_ROT_270,		/* 270-degree clockwise (or 90 ccw) */
+	JXFORM_WIPE		/* wipe */
+} JXFORM_CODE;
+
+/*
+ * Codes for crop parameters, which can individually be unspecified,
+ * positive or negative for xoffset or yoffset,
+ * positive or forced for width or height.
+ */
+
+typedef enum {
+        JCROP_UNSET,
+        JCROP_POS,
+        JCROP_NEG,
+        JCROP_FORCE
+} JCROP_CODE;
+
+/*
+ * Transform parameters struct.
+ * NB: application must not change any elements of this struct after
+ * calling jtransform_request_workspace.
+ */
+
+typedef struct {
+  /* Options: set by caller */
+  JXFORM_CODE transform;	/* image transform operator */
+  boolean perfect;		/* if TRUE, fail if partial MCUs are requested */
+  boolean trim;			/* if TRUE, trim partial MCUs as needed */
+  boolean force_grayscale;	/* if TRUE, convert color image to grayscale */
+  boolean crop;			/* if TRUE, crop or wipe source image */
+
+  /* Crop parameters: application need not set these unless crop is TRUE.
+   * These can be filled in by jtransform_parse_crop_spec().
+   */
+  JDIMENSION crop_width;	/* Width of selected region */
+  JCROP_CODE crop_width_set;	/* (forced disables adjustment) */
+  JDIMENSION crop_height;	/* Height of selected region */
+  JCROP_CODE crop_height_set;	/* (forced disables adjustment) */
+  JDIMENSION crop_xoffset;	/* X offset of selected region */
+  JCROP_CODE crop_xoffset_set;	/* (negative measures from right edge) */
+  JDIMENSION crop_yoffset;	/* Y offset of selected region */
+  JCROP_CODE crop_yoffset_set;	/* (negative measures from bottom edge) */
+
+  /* Internal workspace: caller should not touch these */
+  int num_components;		/* # of components in workspace */
+  jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */
+  JDIMENSION output_width;	/* cropped destination dimensions */
+  JDIMENSION output_height;
+  JDIMENSION x_crop_offset;	/* destination crop offsets measured in iMCUs */
+  JDIMENSION y_crop_offset;
+  JDIMENSION drop_width;	/* drop/wipe dimensions measured in iMCUs */
+  JDIMENSION drop_height;
+  int iMCU_sample_width;	/* destination iMCU size */
+  int iMCU_sample_height;
+} jpeg_transform_info;
+
+
+#if TRANSFORMS_SUPPORTED
+
+/* Parse a crop specification (written in X11 geometry style) */
+EXTERN(boolean) jtransform_parse_crop_spec
+	JPP((jpeg_transform_info *info, const char *spec));
+/* Request any required workspace */
+EXTERN(boolean) jtransform_request_workspace
+	JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info));
+/* Adjust output image parameters */
+EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters
+	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	     jvirt_barray_ptr *src_coef_arrays,
+	     jpeg_transform_info *info));
+/* Execute the actual transformation, if any */
+EXTERN(void) jtransform_execute_transform
+	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	     jvirt_barray_ptr *src_coef_arrays,
+	     jpeg_transform_info *info));
+/* Determine whether lossless transformation is perfectly
+ * possible for a specified image and transformation.
+ */
+EXTERN(boolean) jtransform_perfect_transform
+	JPP((JDIMENSION image_width, JDIMENSION image_height,
+	     int MCU_width, int MCU_height,
+	     JXFORM_CODE transform));
+
+/* jtransform_execute_transform used to be called
+ * jtransform_execute_transformation, but some compilers complain about
+ * routine names that long.  This macro is here to avoid breaking any
+ * old source code that uses the original name...
+ */
+#define jtransform_execute_transformation	jtransform_execute_transform
+
+#endif /* TRANSFORMS_SUPPORTED */
+
+
+/*
+ * Support for copying optional markers from source to destination file.
+ */
+
+typedef enum {
+	JCOPYOPT_NONE,		/* copy no optional markers */
+	JCOPYOPT_COMMENTS,	/* copy only comment (COM) markers */
+	JCOPYOPT_ALL		/* copy all optional markers */
+} JCOPY_OPTION;
+
+#define JCOPYOPT_DEFAULT  JCOPYOPT_COMMENTS	/* recommended default */
+
+/* Setup decompression object to save desired markers in memory */
+EXTERN(void) jcopy_markers_setup
+	JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option));
+/* Copy markers saved in the given source object to the destination object */
+EXTERN(void) jcopy_markers_execute
+	JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo,
+	     JCOPY_OPTION option));