diff options
Diffstat (limited to 'jpeg/80')
| -rw-r--r-- | jpeg/80/jinclude.h | 91 | ||||
| -rw-r--r-- | jpeg/80/jpegint.h | 407 | ||||
| -rw-r--r-- | jpeg/80/jpeglib.h | 1160 | ||||
| -rw-r--r-- | jpeg/80/transupp.c | 1583 | ||||
| -rw-r--r-- | jpeg/80/transupp.h | 210 |
5 files changed, 3451 insertions, 0 deletions
diff --git a/jpeg/80/jinclude.h b/jpeg/80/jinclude.h new file mode 100644 index 0000000..0a4f151 --- /dev/null +++ b/jpeg/80/jinclude.h @@ -0,0 +1,91 @@ +/* + * jinclude.h + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file exists to provide a single place to fix any problems with + * including the wrong system include files. (Common problems are taken + * care of by the standard jconfig symbols, but on really weird systems + * you may have to edit this file.) + * + * NOTE: this file is NOT intended to be included by applications using the + * JPEG library. Most applications need only include jpeglib.h. + */ + + +/* Include auto-config file to find out which system include files we need. */ + +#include "jconfig.h" /* auto configuration options */ +#define JCONFIG_INCLUDED /* so that jpeglib.h doesn't do it again */ + +/* + * We need the NULL macro and size_t typedef. + * On an ANSI-conforming system it is sufficient to include <stddef.h>. + * Otherwise, we get them from <stdlib.h> or <stdio.h>; we may have to + * pull in <sys/types.h> as well. + * Note that the core JPEG library does not require <stdio.h>; + * only the default error handler and data source/destination modules do. + * But we must pull it in because of the references to FILE in jpeglib.h. + * You can remove those references if you want to compile without <stdio.h>. + */ + +#ifdef HAVE_STDDEF_H +#include <stddef.h> +#endif + +#ifdef HAVE_STDLIB_H +#include <stdlib.h> +#endif + +#ifdef NEED_SYS_TYPES_H +#include <sys/types.h> +#endif + +#include <stdio.h> + +/* + * We need memory copying and zeroing functions, plus strncpy(). + * ANSI and System V implementations declare these in <string.h>. + * BSD doesn't have the mem() functions, but it does have bcopy()/bzero(). + * Some systems may declare memset and memcpy in <memory.h>. + * + * NOTE: we assume the size parameters to these functions are of type size_t. + * Change the casts in these macros if not! + */ + +#ifdef NEED_BSD_STRINGS + +#include <strings.h> +#define MEMZERO(target,size) bzero((void *)(target), (size_t)(size)) +#define MEMCOPY(dest,src,size) bcopy((const void *)(src), (void *)(dest), (size_t)(size)) + +#else /* not BSD, assume ANSI/SysV string lib */ + +#include <string.h> +#define MEMZERO(target,size) memset((void *)(target), 0, (size_t)(size)) +#define MEMCOPY(dest,src,size) memcpy((void *)(dest), (const void *)(src), (size_t)(size)) + +#endif + +/* + * In ANSI C, and indeed any rational implementation, size_t is also the + * type returned by sizeof(). However, it seems there are some irrational + * implementations out there, in which sizeof() returns an int even though + * size_t is defined as long or unsigned long. To ensure consistent results + * we always use this SIZEOF() macro in place of using sizeof() directly. + */ + +#define SIZEOF(object) ((size_t) sizeof(object)) + +/* + * The modules that use fread() and fwrite() always invoke them through + * these macros. On some systems you may need to twiddle the argument casts. + * CAUTION: argument order is different from underlying functions! + */ + +#define JFREAD(file,buf,sizeofbuf) \ + ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) +#define JFWRITE(file,buf,sizeofbuf) \ + ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) diff --git a/jpeg/80/jpegint.h b/jpeg/80/jpegint.h new file mode 100644 index 0000000..0c27a4e --- /dev/null +++ b/jpeg/80/jpegint.h @@ -0,0 +1,407 @@ +/* + * jpegint.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 1997-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides common declarations for the various JPEG modules. + * These declarations are considered internal to the JPEG library; most + * applications using the library shouldn't need to include this file. + */ + + +/* Declarations for both compression & decompression */ + +typedef enum { /* Operating modes for buffer controllers */ + JBUF_PASS_THRU, /* Plain stripwise operation */ + /* Remaining modes require a full-image buffer to have been created */ + JBUF_SAVE_SOURCE, /* Run source subobject only, save output */ + JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */ + JBUF_SAVE_AND_PASS /* Run both subobjects, save output */ +} J_BUF_MODE; + +/* Values of global_state field (jdapi.c has some dependencies on ordering!) */ +#define CSTATE_START 100 /* after create_compress */ +#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */ +#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */ +#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */ +#define DSTATE_START 200 /* after create_decompress */ +#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */ +#define DSTATE_READY 202 /* found SOS, ready for start_decompress */ +#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/ +#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */ +#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */ +#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */ +#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */ +#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */ +#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */ +#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */ + + +/* Declarations for compression modules */ + +/* Master control module */ +struct jpeg_comp_master { + JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo)); + JMETHOD(void, pass_startup, (j_compress_ptr cinfo)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean call_pass_startup; /* True if pass_startup must be called */ + boolean is_last_pass; /* True during last pass */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_c_main_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail)); +}; + +/* Compression preprocessing (downsampling input buffer control) */ +struct jpeg_c_prep_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, pre_process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, + JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_c_coef_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf)); +}; + +/* Colorspace conversion */ +struct jpeg_color_converter { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, color_convert, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows)); +}; + +/* Downsampling */ +struct jpeg_downsampler { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, downsample, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_index, + JSAMPIMAGE output_buf, + JDIMENSION out_row_group_index)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Forward DCT (also controls coefficient quantization) */ +typedef JMETHOD(void, forward_DCT_ptr, + (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks)); + +struct jpeg_forward_dct { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + /* It is useful to allow each component to have a separate FDCT method. */ + forward_DCT_ptr forward_DCT[MAX_COMPONENTS]; +}; + +/* Entropy encoding */ +struct jpeg_entropy_encoder { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); + JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); +}; + +/* Marker writing */ +struct jpeg_marker_writer { + JMETHOD(void, write_file_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_frame_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_scan_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo)); + JMETHOD(void, write_tables_only, (j_compress_ptr cinfo)); + /* These routines are exported to allow insertion of extra markers */ + /* Probably only COM and APPn markers should be written this way */ + JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker, + unsigned int datalen)); + JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val)); +}; + + +/* Declarations for decompression modules */ + +/* Master control module */ +struct jpeg_decomp_master { + JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ +}; + +/* Input control module */ +struct jpeg_input_controller { + JMETHOD(int, consume_input, (j_decompress_ptr cinfo)); + JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo)); + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean has_multiple_scans; /* True if file has multiple scans */ + boolean eoi_reached; /* True when EOI has been consumed */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_d_main_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_d_coef_controller { + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); + JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, + JSAMPIMAGE output_buf)); + /* Pointer to array of coefficient virtual arrays, or NULL if none */ + jvirt_barray_ptr *coef_arrays; +}; + +/* Decompression postprocessing (color quantization buffer control) */ +struct jpeg_d_post_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, post_process_data, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Marker reading & parsing */ +struct jpeg_marker_reader { + JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo)); + /* Read markers until SOS or EOI. + * Returns same codes as are defined for jpeg_consume_input: + * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + */ + JMETHOD(int, read_markers, (j_decompress_ptr cinfo)); + /* Read a restart marker --- exported for use by entropy decoder only */ + jpeg_marker_parser_method read_restart_marker; + + /* State of marker reader --- nominally internal, but applications + * supplying COM or APPn handlers might like to know the state. + */ + boolean saw_SOI; /* found SOI? */ + boolean saw_SOF; /* found SOF? */ + int next_restart_num; /* next restart number expected (0-7) */ + unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ +}; + +/* Entropy decoding */ +struct jpeg_entropy_decoder { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, + JBLOCKROW *MCU_data)); +}; + +/* Inverse DCT (also performs dequantization) */ +typedef JMETHOD(void, inverse_DCT_method_ptr, + (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col)); + +struct jpeg_inverse_dct { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + /* It is useful to allow each component to have a separate IDCT method. */ + inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS]; +}; + +/* Upsampling (note that upsampler must also call color converter) */ +struct jpeg_upsampler { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, upsample, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Colorspace conversion */ +struct jpeg_color_deconverter { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, color_convert, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows)); +}; + +/* Color quantization or color precision reduction */ +struct jpeg_color_quantizer { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); + JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, + int num_rows)); + JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, new_color_map, (j_decompress_ptr cinfo)); +}; + + +/* Miscellaneous useful macros */ + +#undef MAX +#define MAX(a,b) ((a) > (b) ? (a) : (b)) +#undef MIN +#define MIN(a,b) ((a) < (b) ? (a) : (b)) + + +/* We assume that right shift corresponds to signed division by 2 with + * rounding towards minus infinity. This is correct for typical "arithmetic + * shift" instructions that shift in copies of the sign bit. But some + * C compilers implement >> with an unsigned shift. For these machines you + * must define RIGHT_SHIFT_IS_UNSIGNED. + * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity. + * It is only applied with constant shift counts. SHIFT_TEMPS must be + * included in the variables of any routine using RIGHT_SHIFT. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define SHIFT_TEMPS INT32 shift_temp; +#define RIGHT_SHIFT(x,shft) \ + ((shift_temp = (x)) < 0 ? \ + (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \ + (shift_temp >> (shft))) +#else +#define SHIFT_TEMPS +#define RIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_compress_master jICompress +#define jinit_c_master_control jICMaster +#define jinit_c_main_controller jICMainC +#define jinit_c_prep_controller jICPrepC +#define jinit_c_coef_controller jICCoefC +#define jinit_color_converter jICColor +#define jinit_downsampler jIDownsampler +#define jinit_forward_dct jIFDCT +#define jinit_huff_encoder jIHEncoder +#define jinit_arith_encoder jIAEncoder +#define jinit_marker_writer jIMWriter +#define jinit_master_decompress jIDMaster +#define jinit_d_main_controller jIDMainC +#define jinit_d_coef_controller jIDCoefC +#define jinit_d_post_controller jIDPostC +#define jinit_input_controller jIInCtlr +#define jinit_marker_reader jIMReader +#define jinit_huff_decoder jIHDecoder +#define jinit_arith_decoder jIADecoder +#define jinit_inverse_dct jIIDCT +#define jinit_upsampler jIUpsampler +#define jinit_color_deconverter jIDColor +#define jinit_1pass_quantizer jI1Quant +#define jinit_2pass_quantizer jI2Quant +#define jinit_merged_upsampler jIMUpsampler +#define jinit_memory_mgr jIMemMgr +#define jdiv_round_up jDivRound +#define jround_up jRound +#define jcopy_sample_rows jCopySamples +#define jcopy_block_row jCopyBlocks +#define jzero_far jZeroFar +#define jpeg_zigzag_order jZIGTable +#define jpeg_natural_order jZAGTable +#define jpeg_natural_order7 jZAGTable7 +#define jpeg_natural_order6 jZAGTable6 +#define jpeg_natural_order5 jZAGTable5 +#define jpeg_natural_order4 jZAGTable4 +#define jpeg_natural_order3 jZAGTable3 +#define jpeg_natural_order2 jZAGTable2 +#define jpeg_aritab jAriTab +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Compression module initialization routines */ +EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo, + boolean transcode_only)); +EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo)); +/* Decompression module initialization routines */ +EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo)); +/* Memory manager initialization */ +EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo)); + +/* Utility routines in jutils.c */ +EXTERN(long) jdiv_round_up JPP((long a, long b)); +EXTERN(long) jround_up JPP((long a, long b)); +EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, + JSAMPARRAY output_array, int dest_row, + int num_rows, JDIMENSION num_cols)); +EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, + JDIMENSION num_blocks)); +EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero)); +/* Constant tables in jutils.c */ +#if 0 /* This table is not actually needed in v6a */ +extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ +#endif +extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ +extern const int jpeg_natural_order7[]; /* zz to natural order for 7x7 block */ +extern const int jpeg_natural_order6[]; /* zz to natural order for 6x6 block */ +extern const int jpeg_natural_order5[]; /* zz to natural order for 5x5 block */ +extern const int jpeg_natural_order4[]; /* zz to natural order for 4x4 block */ +extern const int jpeg_natural_order3[]; /* zz to natural order for 3x3 block */ +extern const int jpeg_natural_order2[]; /* zz to natural order for 2x2 block */ + +/* Arithmetic coding probability estimation tables in jaricom.c */ +extern const INT32 jpeg_aritab[]; + +/* Suppress undefined-structure complaints if necessary. */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +#endif +#endif /* INCOMPLETE_TYPES_BROKEN */ diff --git a/jpeg/80/jpeglib.h b/jpeg/80/jpeglib.h new file mode 100644 index 0000000..1eb1fac --- /dev/null +++ b/jpeg/80/jpeglib.h @@ -0,0 +1,1160 @@ +/* + * jpeglib.h + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2002-2010 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the application interface for the JPEG library. + * Most applications using the library need only include this file, + * and perhaps jerror.h if they want to know the exact error codes. + */ + +#ifndef JPEGLIB_H +#define JPEGLIB_H + +/* + * First we include the configuration files that record how this + * installation of the JPEG library is set up. jconfig.h can be + * generated automatically for many systems. jmorecfg.h contains + * manual configuration options that most people need not worry about. + */ + +#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ +#include "jconfig.h" /* widely used configuration options */ +#endif +#include "jmorecfg.h" /* seldom changed options */ + + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +extern "C" { +#endif +#endif + +/* Version IDs for the JPEG library. + * Might be useful for tests like "#if JPEG_LIB_VERSION >= 80". + */ + +#define JPEG_LIB_VERSION 80 /* Compatibility version 8.0 */ +#define JPEG_LIB_VERSION_MAJOR 8 +#define JPEG_LIB_VERSION_MINOR 3 + + +/* Various constants determining the sizes of things. + * All of these are specified by the JPEG standard, so don't change them + * if you want to be compatible. + */ + +#define DCTSIZE 8 /* The basic DCT block is 8x8 samples */ +#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ +#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ +#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ +#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ +#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ +#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ +/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; + * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. + * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU + * to handle it. We even let you do this from the jconfig.h file. However, + * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe + * sometimes emits noncompliant files doesn't mean you should too. + */ +#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ +#ifndef D_MAX_BLOCKS_IN_MCU +#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ +#endif + + +/* Data structures for images (arrays of samples and of DCT coefficients). + * On 80x86 machines, the image arrays are too big for near pointers, + * but the pointer arrays can fit in near memory. + */ + +typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */ +typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ +typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ + +typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ +typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */ +typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ +typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ + +typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */ + + +/* Types for JPEG compression parameters and working tables. */ + + +/* DCT coefficient quantization tables. */ + +typedef struct { + /* This array gives the coefficient quantizers in natural array order + * (not the zigzag order in which they are stored in a JPEG DQT marker). + * CAUTION: IJG versions prior to v6a kept this array in zigzag order. + */ + UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JQUANT_TBL; + + +/* Huffman coding tables. */ + +typedef struct { + /* These two fields directly represent the contents of a JPEG DHT marker */ + UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ + /* length k bits; bits[0] is unused */ + UINT8 huffval[256]; /* The symbols, in order of incr code length */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JHUFF_TBL; + + +/* Basic info about one component (color channel). */ + +typedef struct { + /* These values are fixed over the whole image. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOF marker. */ + int component_id; /* identifier for this component (0..255) */ + int component_index; /* its index in SOF or cinfo->comp_info[] */ + int h_samp_factor; /* horizontal sampling factor (1..4) */ + int v_samp_factor; /* vertical sampling factor (1..4) */ + int quant_tbl_no; /* quantization table selector (0..3) */ + /* These values may vary between scans. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOS marker. */ + /* The decompressor output side may not use these variables. */ + int dc_tbl_no; /* DC entropy table selector (0..3) */ + int ac_tbl_no; /* AC entropy table selector (0..3) */ + + /* Remaining fields should be treated as private by applications. */ + + /* These values are computed during compression or decompression startup: */ + /* Component's size in DCT blocks. + * Any dummy blocks added to complete an MCU are not counted; therefore + * these values do not depend on whether a scan is interleaved or not. + */ + JDIMENSION width_in_blocks; + JDIMENSION height_in_blocks; + /* Size of a DCT block in samples, + * reflecting any scaling we choose to apply during the DCT step. + * Values from 1 to 16 are supported. + * Note that different components may receive different DCT scalings. + */ + int DCT_h_scaled_size; + int DCT_v_scaled_size; + /* The downsampled dimensions are the component's actual, unpadded number + * of samples at the main buffer (preprocessing/compression interface); + * DCT scaling is included, so + * downsampled_width = ceil(image_width * Hi/Hmax * DCT_h_scaled_size/DCTSIZE) + * and similarly for height. + */ + JDIMENSION downsampled_width; /* actual width in samples */ + JDIMENSION downsampled_height; /* actual height in samples */ + /* This flag is used only for decompression. In cases where some of the + * components will be ignored (eg grayscale output from YCbCr image), + * we can skip most computations for the unused components. + */ + boolean component_needed; /* do we need the value of this component? */ + + /* These values are computed before starting a scan of the component. */ + /* The decompressor output side may not use these variables. */ + int MCU_width; /* number of blocks per MCU, horizontally */ + int MCU_height; /* number of blocks per MCU, vertically */ + int MCU_blocks; /* MCU_width * MCU_height */ + int MCU_sample_width; /* MCU width in samples: MCU_width * DCT_h_scaled_size */ + int last_col_width; /* # of non-dummy blocks across in last MCU */ + int last_row_height; /* # of non-dummy blocks down in last MCU */ + + /* Saved quantization table for component; NULL if none yet saved. + * See jdinput.c comments about the need for this information. + * This field is currently used only for decompression. + */ + JQUANT_TBL * quant_table; + + /* Private per-component storage for DCT or IDCT subsystem. */ + void * dct_table; +} jpeg_component_info; + + +/* The script for encoding a multiple-scan file is an array of these: */ + +typedef struct { + int comps_in_scan; /* number of components encoded in this scan */ + int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ + int Ss, Se; /* progressive JPEG spectral selection parms */ + int Ah, Al; /* progressive JPEG successive approx. parms */ +} jpeg_scan_info; + +/* The decompressor can save APPn and COM markers in a list of these: */ + +typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr; + +struct jpeg_marker_struct { + jpeg_saved_marker_ptr next; /* next in list, or NULL */ + UINT8 marker; /* marker code: JPEG_COM, or JPEG_APP0+n */ + unsigned int original_length; /* # bytes of data in the file */ + unsigned int data_length; /* # bytes of data saved at data[] */ + JOCTET FAR * data; /* the data contained in the marker */ + /* the marker length word is not counted in data_length or original_length */ +}; + +/* Known color spaces. */ + +typedef enum { + JCS_UNKNOWN, /* error/unspecified */ + JCS_GRAYSCALE, /* monochrome */ + JCS_RGB, /* red/green/blue */ + JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ + JCS_CMYK, /* C/M/Y/K */ + JCS_YCCK /* Y/Cb/Cr/K */ +} J_COLOR_SPACE; + +/* DCT/IDCT algorithm options. */ + +typedef enum { + JDCT_ISLOW, /* slow but accurate integer algorithm */ + JDCT_IFAST, /* faster, less accurate integer method */ + JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ +} J_DCT_METHOD; + +#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ +#define JDCT_DEFAULT JDCT_ISLOW +#endif +#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ +#define JDCT_FASTEST JDCT_IFAST +#endif + +/* Dithering options for decompression. */ + +typedef enum { + JDITHER_NONE, /* no dithering */ + JDITHER_ORDERED, /* simple ordered dither */ + JDITHER_FS /* Floyd-Steinberg error diffusion dither */ +} J_DITHER_MODE; + + +/* Common fields between JPEG compression and decompression master structs. */ + +#define jpeg_common_fields \ + struct jpeg_error_mgr * err; /* Error handler module */\ + struct jpeg_memory_mgr * mem; /* Memory manager module */\ + struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ + void * client_data; /* Available for use by application */\ + boolean is_decompressor; /* So common code can tell which is which */\ + int global_state /* For checking call sequence validity */ + +/* Routines that are to be used by both halves of the library are declared + * to receive a pointer to this structure. There are no actual instances of + * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. + */ +struct jpeg_common_struct { + jpeg_common_fields; /* Fields common to both master struct types */ + /* Additional fields follow in an actual jpeg_compress_struct or + * jpeg_decompress_struct. All three structs must agree on these + * initial fields! (This would be a lot cleaner in C++.) + */ +}; + +typedef struct jpeg_common_struct * j_common_ptr; +typedef struct jpeg_compress_struct * j_compress_ptr; +typedef struct jpeg_decompress_struct * j_decompress_ptr; + + +/* Master record for a compression instance */ + +struct jpeg_compress_struct { + jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ + + /* Destination for compressed data */ + struct jpeg_destination_mgr * dest; + + /* Description of source image --- these fields must be filled in by + * outer application before starting compression. in_color_space must + * be correct before you can even call jpeg_set_defaults(). + */ + + JDIMENSION image_width; /* input image width */ + JDIMENSION image_height; /* input image height */ + int input_components; /* # of color components in input image */ + J_COLOR_SPACE in_color_space; /* colorspace of input image */ + + double input_gamma; /* image gamma of input image */ + + /* Compression parameters --- these fields must be set before calling + * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to + * initialize everything to reasonable defaults, then changing anything + * the application specifically wants to change. That way you won't get + * burnt when new parameters are added. Also note that there are several + * helper routines to simplify changing parameters. + */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + JDIMENSION jpeg_width; /* scaled JPEG image width */ + JDIMENSION jpeg_height; /* scaled JPEG image height */ + /* Dimensions of actual JPEG image that will be written to file, + * derived from input dimensions by scaling factors above. + * These fields are computed by jpeg_start_compress(). + * You can also use jpeg_calc_jpeg_dimensions() to determine these values + * in advance of calling jpeg_start_compress(). + */ + + int data_precision; /* bits of precision in image data */ + + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + int q_scale_factor[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined, + * and corresponding scale factors (percentage, initialized 100). + */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + int num_scans; /* # of entries in scan_info array */ + const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ + /* The default value of scan_info is NULL, which causes a single-scan + * sequential JPEG file to be emitted. To create a multi-scan file, + * set num_scans and scan_info to point to an array of scan definitions. + */ + + boolean raw_data_in; /* TRUE=caller supplies downsampled data */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */ + int smoothing_factor; /* 1..100, or 0 for no input smoothing */ + J_DCT_METHOD dct_method; /* DCT algorithm selector */ + + /* The restart interval can be specified in absolute MCUs by setting + * restart_interval, or in MCU rows by setting restart_in_rows + * (in which case the correct restart_interval will be figured + * for each scan). + */ + unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ + int restart_in_rows; /* if > 0, MCU rows per restart interval */ + + /* Parameters controlling emission of special markers. */ + + boolean write_JFIF_header; /* should a JFIF marker be written? */ + UINT8 JFIF_major_version; /* What to write for the JFIF version number */ + UINT8 JFIF_minor_version; + /* These three values are not used by the JPEG code, merely copied */ + /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ + /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ + /* ratio is defined by X_density/Y_density even when density_unit=0. */ + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean write_Adobe_marker; /* should an Adobe marker be written? */ + + /* State variable: index of next scanline to be written to + * jpeg_write_scanlines(). Application may use this to control its + * processing loop, e.g., "while (next_scanline < image_height)". + */ + + JDIMENSION next_scanline; /* 0 .. image_height-1 */ + + /* Remaining fields are known throughout compressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during compression startup + */ + boolean progressive_mode; /* TRUE if scan script uses progressive mode */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ + /* The coefficient controller receives data in units of MCU rows as defined + * for fully interleaved scans (whether the JPEG file is interleaved or not). + * There are v_samp_factor * DCTSIZE sample rows of each component in an + * "iMCU" (interleaved MCU) row. + */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[C_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) */ + + /* + * Links to compression subobjects (methods and private variables of modules) + */ + struct jpeg_comp_master * master; + struct jpeg_c_main_controller * main; + struct jpeg_c_prep_controller * prep; + struct jpeg_c_coef_controller * coef; + struct jpeg_marker_writer * marker; + struct jpeg_color_converter * cconvert; + struct jpeg_downsampler * downsample; + struct jpeg_forward_dct * fdct; + struct jpeg_entropy_encoder * entropy; + jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */ + int script_space_size; +}; + + +/* Master record for a decompression instance */ + +struct jpeg_decompress_struct { + jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ + + /* Source of compressed data */ + struct jpeg_source_mgr * src; + + /* Basic description of image --- filled in by jpeg_read_header(). */ + /* Application may inspect these values to decide how to process image. */ + + JDIMENSION image_width; /* nominal image width (from SOF marker) */ + JDIMENSION image_height; /* nominal image height */ + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + /* Decompression processing parameters --- these fields must be set before + * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes + * them to default values. + */ + + J_COLOR_SPACE out_color_space; /* colorspace for output */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + double output_gamma; /* image gamma wanted in output */ + + boolean buffered_image; /* TRUE=multiple output passes */ + boolean raw_data_out; /* TRUE=downsampled data wanted */ + + J_DCT_METHOD dct_method; /* IDCT algorithm selector */ + boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ + boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ + + boolean quantize_colors; /* TRUE=colormapped output wanted */ + /* the following are ignored if not quantize_colors: */ + J_DITHER_MODE dither_mode; /* type of color dithering to use */ + boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ + int desired_number_of_colors; /* max # colors to use in created colormap */ + /* these are significant only in buffered-image mode: */ + boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ + boolean enable_external_quant;/* enable future use of external colormap */ + boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ + + /* Description of actual output image that will be returned to application. + * These fields are computed by jpeg_start_decompress(). + * You can also use jpeg_calc_output_dimensions() to determine these values + * in advance of calling jpeg_start_decompress(). + */ + + JDIMENSION output_width; /* scaled image width */ + JDIMENSION output_height; /* scaled image height */ + int out_color_components; /* # of color components in out_color_space */ + int output_components; /* # of color components returned */ + /* output_components is 1 (a colormap index) when quantizing colors; + * otherwise it equals out_color_components. + */ + int rec_outbuf_height; /* min recommended height of scanline buffer */ + /* If the buffer passed to jpeg_read_scanlines() is less than this many rows + * high, space and time will be wasted due to unnecessary data copying. + * Usually rec_outbuf_height will be 1 or 2, at most 4. + */ + + /* When quantizing colors, the output colormap is described by these fields. + * The application can supply a colormap by setting colormap non-NULL before + * calling jpeg_start_decompress; otherwise a colormap is created during + * jpeg_start_decompress or jpeg_start_output. + * The map has out_color_components rows and actual_number_of_colors columns. + */ + int actual_number_of_colors; /* number of entries in use */ + JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ + + /* State variables: these variables indicate the progress of decompression. + * The application may examine these but must not modify them. + */ + + /* Row index of next scanline to be read from jpeg_read_scanlines(). + * Application may use this to control its processing loop, e.g., + * "while (output_scanline < output_height)". + */ + JDIMENSION output_scanline; /* 0 .. output_height-1 */ + + /* Current input scan number and number of iMCU rows completed in scan. + * These indicate the progress of the decompressor input side. + */ + int input_scan_number; /* Number of SOS markers seen so far */ + JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ + + /* The "output scan number" is the notional scan being displayed by the + * output side. The decompressor will not allow output scan/row number + * to get ahead of input scan/row, but it can fall arbitrarily far behind. + */ + int output_scan_number; /* Nominal scan number being displayed */ + JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ + + /* Current progression status. coef_bits[c][i] indicates the precision + * with which component c's DCT coefficient i (in zigzag order) is known. + * It is -1 when no data has yet been received, otherwise it is the point + * transform (shift) value for the most recent scan of the coefficient + * (thus, 0 at completion of the progression). + * This pointer is NULL when reading a non-progressive file. + */ + int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ + + /* Internal JPEG parameters --- the application usually need not look at + * these fields. Note that the decompressor output side may not use + * any parameters that can change between scans. + */ + + /* Quantization and Huffman tables are carried forward across input + * datastreams when processing abbreviated JPEG datastreams. + */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + /* These parameters are never carried across datastreams, since they + * are given in SOF/SOS markers or defined to be reset by SOI. + */ + + int data_precision; /* bits of precision in image data */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + boolean is_baseline; /* TRUE if Baseline SOF0 encountered */ + boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ + + /* These fields record data obtained from optional markers recognized by + * the JPEG library. + */ + boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ + /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */ + UINT8 JFIF_major_version; /* JFIF version number */ + UINT8 JFIF_minor_version; + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ + UINT8 Adobe_transform; /* Color transform code from Adobe marker */ + + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + + /* Aside from the specific data retained from APPn markers known to the + * library, the uninterpreted contents of any or all APPn and COM markers + * can be saved in a list for examination by the application. + */ + jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */ + + /* Remaining fields are known throughout decompressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during decompression startup + */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ + /* The coefficient controller's input and output progress is measured in + * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows + * in fully interleaved JPEG scans, but are used whether the scan is + * interleaved or not. We define an iMCU row as v_samp_factor DCT block + * rows of each component. Therefore, the IDCT output contains + * v_samp_factor*DCT_v_scaled_size sample rows of a component per iMCU row. + */ + + JSAMPLE * sample_range_limit; /* table for fast range-limiting */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + * Note that the decompressor output side must not use these fields. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[D_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + /* These fields are derived from Se of first SOS marker. + */ + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array for entropy decode */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) for entropy decode */ + + /* This field is shared between entropy decoder and marker parser. + * It is either zero or the code of a JPEG marker that has been + * read from the data source, but has not yet been processed. + */ + int unread_marker; + + /* + * Links to decompression subobjects (methods, private variables of modules) + */ + struct jpeg_decomp_master * master; + struct jpeg_d_main_controller * main; + struct jpeg_d_coef_controller * coef; + struct jpeg_d_post_controller * post; + struct jpeg_input_controller * inputctl; + struct jpeg_marker_reader * marker; + struct jpeg_entropy_decoder * entropy; + struct jpeg_inverse_dct * idct; + struct jpeg_upsampler * upsample; + struct jpeg_color_deconverter * cconvert; + struct jpeg_color_quantizer * cquantize; +}; + + +/* "Object" declarations for JPEG modules that may be supplied or called + * directly by the surrounding application. + * As with all objects in the JPEG library, these structs only define the + * publicly visible methods and state variables of a module. Additional + * private fields may exist after the public ones. + */ + + +/* Error handler object */ + +struct jpeg_error_mgr { + /* Error exit handler: does not return to caller */ + JMETHOD(void, error_exit, (j_common_ptr cinfo)); + /* Conditionally emit a trace or warning message */ + JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); + /* Routine that actually outputs a trace or error message */ + JMETHOD(void, output_message, (j_common_ptr cinfo)); + /* Format a message string for the most recent JPEG error or message */ + JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); +#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ + /* Reset error state variables at start of a new image */ + JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); + + /* The message ID code and any parameters are saved here. + * A message can have one string parameter or up to 8 int parameters. + */ + int msg_code; +#define JMSG_STR_PARM_MAX 80 + union { + int i[8]; + char s[JMSG_STR_PARM_MAX]; + } msg_parm; + + /* Standard state variables for error facility */ + + int trace_level; /* max msg_level that will be displayed */ + + /* For recoverable corrupt-data errors, we emit a warning message, + * but keep going unless emit_message chooses to abort. emit_message + * should count warnings in num_warnings. The surrounding application + * can check for bad data by seeing if num_warnings is nonzero at the + * end of processing. + */ + long num_warnings; /* number of corrupt-data warnings */ + + /* These fields point to the table(s) of error message strings. + * An application can change the table pointer to switch to a different + * message list (typically, to change the language in which errors are + * reported). Some applications may wish to add additional error codes + * that will be handled by the JPEG library error mechanism; the second + * table pointer is used for this purpose. + * + * First table includes all errors generated by JPEG library itself. + * Error code 0 is reserved for a "no such error string" message. + */ + const char * const * jpeg_message_table; /* Library errors */ + int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ + /* Second table can be added by application (see cjpeg/djpeg for example). + * It contains strings numbered first_addon_message..last_addon_message. + */ + const char * const * addon_message_table; /* Non-library errors */ + int first_addon_message; /* code for first string in addon table */ + int last_addon_message; /* code for last string in addon table */ +}; + + +/* Progress monitor object */ + +struct jpeg_progress_mgr { + JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); + + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +}; + + +/* Data destination object for compression */ + +struct jpeg_destination_mgr { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + + JMETHOD(void, init_destination, (j_compress_ptr cinfo)); + JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); + JMETHOD(void, term_destination, (j_compress_ptr cinfo)); +}; + + +/* Data source object for decompression */ + +struct jpeg_source_mgr { + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + + JMETHOD(void, init_source, (j_decompress_ptr cinfo)); + JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); + JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); + JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); + JMETHOD(void, term_source, (j_decompress_ptr cinfo)); +}; + + +/* Memory manager object. + * Allocates "small" objects (a few K total), "large" objects (tens of K), + * and "really big" objects (virtual arrays with backing store if needed). + * The memory manager does not allow individual objects to be freed; rather, + * each created object is assigned to a pool, and whole pools can be freed + * at once. This is faster and more convenient than remembering exactly what + * to free, especially where malloc()/free() are not too speedy. + * NB: alloc routines never return NULL. They exit to error_exit if not + * successful. + */ + +#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ +#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ +#define JPOOL_NUMPOOLS 2 + +typedef struct jvirt_sarray_control * jvirt_sarray_ptr; +typedef struct jvirt_barray_control * jvirt_barray_ptr; + + +struct jpeg_memory_mgr { + /* Method pointers */ + JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, + JDIMENSION numrows)); + JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, + JDIMENSION numrows)); + JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION samplesperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION blocksperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); + JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, + jvirt_sarray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, + jvirt_barray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); + JMETHOD(void, self_destruct, (j_common_ptr cinfo)); + + /* Limit on memory allocation for this JPEG object. (Note that this is + * merely advisory, not a guaranteed maximum; it only affects the space + * used for virtual-array buffers.) May be changed by outer application + * after creating the JPEG object. + */ + long max_memory_to_use; + + /* Maximum allocation request accepted by alloc_large. */ + long max_alloc_chunk; +}; + + +/* Routine signature for application-supplied marker processing methods. + * Need not pass marker code since it is stored in cinfo->unread_marker. + */ +typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); + + +/* Declarations for routines called by application. + * The JPP macro hides prototype parameters from compilers that can't cope. + * Note JPP requires double parentheses. + */ + +#ifdef HAVE_PROTOTYPES +#define JPP(arglist) arglist +#else +#define JPP(arglist) () +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. + * We shorten external names to be unique in the first six letters, which + * is good enough for all known systems. + * (If your compiler itself needs names to be unique in less than 15 + * characters, you are out of luck. Get a better compiler.) + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_error jStdError +#define jpeg_CreateCompress jCreaCompress +#define jpeg_CreateDecompress jCreaDecompress +#define jpeg_destroy_compress jDestCompress +#define jpeg_destroy_decompress jDestDecompress +#define jpeg_stdio_dest jStdDest +#define jpeg_stdio_src jStdSrc +#define jpeg_mem_dest jMemDest +#define jpeg_mem_src jMemSrc +#define jpeg_set_defaults jSetDefaults +#define jpeg_set_colorspace jSetColorspace +#define jpeg_default_colorspace jDefColorspace +#define jpeg_set_quality jSetQuality +#define jpeg_set_linear_quality jSetLQuality +#define jpeg_default_qtables jDefQTables +#define jpeg_add_quant_table jAddQuantTable +#define jpeg_quality_scaling jQualityScaling +#define jpeg_simple_progression jSimProgress +#define jpeg_suppress_tables jSuppressTables +#define jpeg_alloc_quant_table jAlcQTable +#define jpeg_alloc_huff_table jAlcHTable +#define jpeg_start_compress jStrtCompress +#define jpeg_write_scanlines jWrtScanlines +#define jpeg_finish_compress jFinCompress +#define jpeg_calc_jpeg_dimensions jCjpegDimensions +#define jpeg_write_raw_data jWrtRawData +#define jpeg_write_marker jWrtMarker +#define jpeg_write_m_header jWrtMHeader +#define jpeg_write_m_byte jWrtMByte +#define jpeg_write_tables jWrtTables +#define jpeg_read_header jReadHeader +#define jpeg_start_decompress jStrtDecompress +#define jpeg_read_scanlines jReadScanlines +#define jpeg_finish_decompress jFinDecompress +#define jpeg_read_raw_data jReadRawData +#define jpeg_has_multiple_scans jHasMultScn +#define jpeg_start_output jStrtOutput +#define jpeg_finish_output jFinOutput +#define jpeg_input_complete jInComplete +#define jpeg_new_colormap jNewCMap +#define jpeg_consume_input jConsumeInput +#define jpeg_core_output_dimensions jCoreDimensions +#define jpeg_calc_output_dimensions jCalcDimensions +#define jpeg_save_markers jSaveMarkers +#define jpeg_set_marker_processor jSetMarker +#define jpeg_read_coefficients jReadCoefs +#define jpeg_write_coefficients jWrtCoefs +#define jpeg_copy_critical_parameters jCopyCrit +#define jpeg_abort_compress jAbrtCompress +#define jpeg_abort_decompress jAbrtDecompress +#define jpeg_abort jAbort +#define jpeg_destroy jDestroy +#define jpeg_resync_to_restart jResyncRestart +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Default error-management setup */ +EXTERN(struct jpeg_error_mgr *) jpeg_std_error + JPP((struct jpeg_error_mgr * err)); + +/* Initialization of JPEG compression objects. + * jpeg_create_compress() and jpeg_create_decompress() are the exported + * names that applications should call. These expand to calls on + * jpeg_CreateCompress and jpeg_CreateDecompress with additional information + * passed for version mismatch checking. + * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx. + */ +#define jpeg_create_compress(cinfo) \ + jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_compress_struct)) +#define jpeg_create_decompress(cinfo) \ + jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_decompress_struct)) +EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo, + int version, size_t structsize)); +EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo, + int version, size_t structsize)); +/* Destruction of JPEG compression objects */ +EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); + +/* Standard data source and destination managers: stdio streams. */ +/* Caller is responsible for opening the file before and closing after. */ +EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); +EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile)); + +/* Data source and destination managers: memory buffers. */ +EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo, + unsigned char ** outbuffer, + unsigned long * outsize)); +EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo, + unsigned char * inbuffer, + unsigned long insize)); + +/* Default parameter setup for compression */ +EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo)); +/* Compression parameter setup aids */ +EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo, + J_COLOR_SPACE colorspace)); +EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, + boolean force_baseline)); +EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo, + int scale_factor, + boolean force_baseline)); +EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo, + boolean force_baseline)); +EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, + boolean force_baseline)); +EXTERN(int) jpeg_quality_scaling JPP((int quality)); +EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo, + boolean suppress)); +EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); +EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); + +/* Main entry points for compression */ +EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo, + boolean write_all_tables)); +EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION num_lines)); +EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo)); + +/* Precalculate JPEG dimensions for current compression parameters. */ +EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo)); + +/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION num_lines)); + +/* Write a special marker. See libjpeg.txt concerning safe usage. */ +EXTERN(void) jpeg_write_marker + JPP((j_compress_ptr cinfo, int marker, + const JOCTET * dataptr, unsigned int datalen)); +/* Same, but piecemeal. */ +EXTERN(void) jpeg_write_m_header + JPP((j_compress_ptr cinfo, int marker, unsigned int datalen)); +EXTERN(void) jpeg_write_m_byte + JPP((j_compress_ptr cinfo, int val)); + +/* Alternate compression function: just write an abbreviated table file */ +EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo)); + +/* Decompression startup: read start of JPEG datastream to see what's there */ +EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, + boolean require_image)); +/* Return value is one of: */ +#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ +#define JPEG_HEADER_OK 1 /* Found valid image datastream */ +#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ +/* If you pass require_image = TRUE (normal case), you need not check for + * a TABLES_ONLY return code; an abbreviated file will cause an error exit. + * JPEG_SUSPENDED is only possible if you use a data source module that can + * give a suspension return (the stdio source module doesn't). + */ + +/* Main entry points for decompression */ +EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION max_lines)); +EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); + +/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION max_lines)); + +/* Additional entry points for buffered-image mode. */ +EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, + int scan_number)); +EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo)); +EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); +/* Return value is one of: */ +/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ +#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ +#define JPEG_REACHED_EOI 2 /* Reached end of image */ +#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ +#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ + +/* Precalculate output dimensions for current decompression parameters. */ +EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); + +/* Control saving of COM and APPn markers into marker_list. */ +EXTERN(void) jpeg_save_markers + JPP((j_decompress_ptr cinfo, int marker_code, + unsigned int length_limit)); + +/* Install a special processing method for COM or APPn markers. */ +EXTERN(void) jpeg_set_marker_processor + JPP((j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine)); + +/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ +EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays)); +EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, + j_compress_ptr dstinfo)); + +/* If you choose to abort compression or decompression before completing + * jpeg_finish_(de)compress, then you need to clean up to release memory, + * temporary files, etc. You can just call jpeg_destroy_(de)compress + * if you're done with the JPEG object, but if you want to clean it up and + * reuse it, call this: + */ +EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); + +/* Generic versions of jpeg_abort and jpeg_destroy that work on either + * flavor of JPEG object. These may be more convenient in some places. + */ +EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo)); +EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo)); + +/* Default restart-marker-resync procedure for use by data source modules */ +EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, + int desired)); + + +/* These marker codes are exported since applications and data source modules + * are likely to want to use them. + */ + +#define JPEG_RST0 0xD0 /* RST0 marker code */ +#define JPEG_EOI 0xD9 /* EOI marker code */ +#define JPEG_APP0 0xE0 /* APP0 marker code */ +#define JPEG_COM 0xFE /* COM marker code */ + + +/* If we have a brain-damaged compiler that emits warnings (or worse, errors) + * for structure definitions that are never filled in, keep it quiet by + * supplying dummy definitions for the various substructures. + */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +struct jpeg_comp_master { long dummy; }; +struct jpeg_c_main_controller { long dummy; }; +struct jpeg_c_prep_controller { long dummy; }; +struct jpeg_c_coef_controller { long dummy; }; +struct jpeg_marker_writer { long dummy; }; +struct jpeg_color_converter { long dummy; }; +struct jpeg_downsampler { long dummy; }; +struct jpeg_forward_dct { long dummy; }; +struct jpeg_entropy_encoder { long dummy; }; +struct jpeg_decomp_master { long dummy; }; +struct jpeg_d_main_controller { long dummy; }; +struct jpeg_d_coef_controller { long dummy; }; +struct jpeg_d_post_controller { long dummy; }; +struct jpeg_input_controller { long dummy; }; +struct jpeg_marker_reader { long dummy; }; +struct jpeg_entropy_decoder { long dummy; }; +struct jpeg_inverse_dct { long dummy; }; +struct jpeg_upsampler { long dummy; }; +struct jpeg_color_deconverter { long dummy; }; +struct jpeg_color_quantizer { long dummy; }; +#endif /* JPEG_INTERNALS */ +#endif /* INCOMPLETE_TYPES_BROKEN */ + + +/* + * The JPEG library modules define JPEG_INTERNALS before including this file. + * The internal structure declarations are read only when that is true. + * Applications using the library should not include jpegint.h, but may wish + * to include jerror.h. + */ + +#ifdef JPEG_INTERNALS +#include "jpegint.h" /* fetch private declarations */ +#include "jerror.h" /* fetch error codes too */ +#endif + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +} +#endif +#endif + +#endif /* JPEGLIB_H */ diff --git a/jpeg/80/transupp.c b/jpeg/80/transupp.c new file mode 100644 index 0000000..4060544 --- /dev/null +++ b/jpeg/80/transupp.c @@ -0,0 +1,1583 @@ +/* + * transupp.c + * + * Copyright (C) 1997-2009, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains image transformation routines and other utility code + * used by the jpegtran sample application. These are NOT part of the core + * JPEG library. But we keep these routines separate from jpegtran.c to + * ease the task of maintaining jpegtran-like programs that have other user + * interfaces. + */ + +/* Although this file really shouldn't have access to the library internals, + * it's helpful to let it call jround_up() and jcopy_block_row(). + */ +#define JPEG_INTERNALS + +#include "jinclude.h" +#include "jpeglib.h" +#include "transupp.h" /* My own external interface */ +#include <ctype.h> /* to declare isdigit() */ + + +#if TRANSFORMS_SUPPORTED + +/* + * Lossless image transformation routines. These routines work on DCT + * coefficient arrays and thus do not require any lossy decompression + * or recompression of the image. + * Thanks to Guido Vollbeding for the initial design and code of this feature, + * and to Ben Jackson for introducing the cropping feature. + * + * Horizontal flipping is done in-place, using a single top-to-bottom + * pass through the virtual source array. It will thus be much the + * fastest option for images larger than main memory. + * + * The other routines require a set of destination virtual arrays, so they + * need twice as much memory as jpegtran normally does. The destination + * arrays are always written in normal scan order (top to bottom) because + * the virtual array manager expects this. The source arrays will be scanned + * in the corresponding order, which means multiple passes through the source + * arrays for most of the transforms. That could result in much thrashing + * if the image is larger than main memory. + * + * If cropping or trimming is involved, the destination arrays may be smaller + * than the source arrays. Note it is not possible to do horizontal flip + * in-place when a nonzero Y crop offset is specified, since we'd have to move + * data from one block row to another but the virtual array manager doesn't + * guarantee we can touch more than one row at a time. So in that case, + * we have to use a separate destination array. + * + * Some notes about the operating environment of the individual transform + * routines: + * 1. Both the source and destination virtual arrays are allocated from the + * source JPEG object, and therefore should be manipulated by calling the + * source's memory manager. + * 2. The destination's component count should be used. It may be smaller + * than the source's when forcing to grayscale. + * 3. Likewise the destination's sampling factors should be used. When + * forcing to grayscale the destination's sampling factors will be all 1, + * and we may as well take that as the effective iMCU size. + * 4. When "trim" is in effect, the destination's dimensions will be the + * trimmed values but the source's will be untrimmed. + * 5. When "crop" is in effect, the destination's dimensions will be the + * cropped values but the source's will be uncropped. Each transform + * routine is responsible for picking up source data starting at the + * correct X and Y offset for the crop region. (The X and Y offsets + * passed to the transform routines are measured in iMCU blocks of the + * destination.) + * 6. All the routines assume that the source and destination buffers are + * padded out to a full iMCU boundary. This is true, although for the + * source buffer it is an undocumented property of jdcoefct.c. + */ + + +LOCAL(void) +do_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Crop. This is only used when no rotate/flip is requested with the crop. */ +{ + JDIMENSION dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + jpeg_component_info *compptr; + + /* We simply have to copy the right amount of data (the destination's + * image size) starting at the given X and Y offsets in the source. + */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } +} + + +LOCAL(void) +do_flip_h_no_crop (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, + jvirt_barray_ptr *src_coef_arrays) +/* Horizontal flip; done in-place, so no separate dest array is required. + * NB: this only works when y_crop_offset is zero. + */ +{ + JDIMENSION MCU_cols, comp_width, blk_x, blk_y, x_crop_blocks; + int ci, k, offset_y; + JBLOCKARRAY buffer; + JCOEFPTR ptr1, ptr2; + JCOEF temp1, temp2; + jpeg_component_info *compptr; + + /* Horizontal mirroring of DCT blocks is accomplished by swapping + * pairs of blocks in-place. Within a DCT block, we perform horizontal + * mirroring by changing the signs of odd-numbered columns. + * Partial iMCUs at the right edge are left untouched. + */ + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + for (blk_y = 0; blk_y < compptr->height_in_blocks; + blk_y += compptr->v_samp_factor) { + buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + /* Do the mirroring */ + for (blk_x = 0; blk_x * 2 < comp_width; blk_x++) { + ptr1 = buffer[offset_y][blk_x]; + ptr2 = buffer[offset_y][comp_width - blk_x - 1]; + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + temp1 = *ptr1; /* swap even column */ + temp2 = *ptr2; + *ptr1++ = temp2; + *ptr2++ = temp1; + temp1 = *ptr1; /* swap odd column with sign change */ + temp2 = *ptr2; + *ptr1++ = -temp2; + *ptr2++ = -temp1; + } + } + if (x_crop_blocks > 0) { + /* Now left-justify the portion of the data to be kept. + * We can't use a single jcopy_block_row() call because that routine + * depends on memcpy(), whose behavior is unspecified for overlapping + * source and destination areas. Sigh. + */ + for (blk_x = 0; blk_x < compptr->width_in_blocks; blk_x++) { + jcopy_block_row(buffer[offset_y] + blk_x + x_crop_blocks, + buffer[offset_y] + blk_x, + (JDIMENSION) 1); + } + } + } + } + } +} + + +LOCAL(void) +do_flip_h (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Horizontal flip in general cropping case */ +{ + JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, k, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Here we must output into a separate array because we can't touch + * different rows of a single virtual array simultaneously. Otherwise, + * this is essentially the same as the routine above. + */ + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + dst_row_ptr = dst_buffer[offset_y]; + src_row_ptr = src_buffer[offset_y]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Do the mirrorable blocks */ + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + /* this unrolled loop doesn't need to know which row it's on... */ + for (k = 0; k < DCTSIZE2; k += 2) { + *dst_ptr++ = *src_ptr++; /* copy even column */ + *dst_ptr++ = - *src_ptr++; /* copy odd column with sign change */ + } + } else { + /* Copy last partial block(s) verbatim */ + jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, + dst_row_ptr + dst_blk_x, + (JDIMENSION) 1); + } + } + } + } + } +} + + +LOCAL(void) +do_flip_v (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Vertical flip */ +{ + JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* We output into a separate array because we can't touch different + * rows of the source virtual array simultaneously. Otherwise, this + * is a pretty straightforward analog of horizontal flip. + * Within a DCT block, vertical mirroring is done by changing the signs + * of odd-numbered rows. + * Partial iMCUs at the bottom edge are copied verbatim. + */ + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_height - y_crop_blocks - dst_blk_y - + (JDIMENSION) compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + /* Bottom-edge blocks will be copied verbatim. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + dst_row_ptr = dst_buffer[offset_y]; + src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; + src_row_ptr += x_crop_blocks; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x++) { + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[dst_blk_x]; + for (i = 0; i < DCTSIZE; i += 2) { + /* copy even row */ + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = *src_ptr++; + /* copy odd row with sign change */ + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = - *src_ptr++; + } + } + } else { + /* Just copy row verbatim. */ + jcopy_block_row(src_buffer[offset_y] + x_crop_blocks, + dst_buffer[offset_y], + compptr->width_in_blocks); + } + } + } + } +} + + +LOCAL(void) +do_transpose (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Transpose source into destination */ +{ + JDIMENSION dst_blk_x, dst_blk_y, x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Transposing pixels within a block just requires transposing the + * DCT coefficients. + * Partial iMCUs at the edges require no special treatment; we simply + * process all the available DCT blocks for every component. + */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + src_ptr = src_buffer[offset_x][dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } +} + + +LOCAL(void) +do_rot_90 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 90 degree rotation is equivalent to + * 1. Transposing the image; + * 2. Horizontal mirroring. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, comp_width, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Because of the horizontal mirror step, we can't process partial iMCUs + * at the (output) right edge properly. They just get transposed and + * not mirrored. + */ + MCU_cols = srcinfo->output_height / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_width - x_crop_blocks - dst_blk_x - + (JDIMENSION) compptr->h_samp_factor, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } else { + /* Edge blocks are transposed but not mirrored. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + i++; + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } else { + /* Edge blocks are transposed but not mirrored. */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } +} + + +LOCAL(void) +do_rot_270 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 270 degree rotation is equivalent to + * 1. Horizontal mirroring; + * 2. Transposing the image. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_rows, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + /* Because of the horizontal mirror step, we can't process partial iMCUs + * at the (output) bottom edge properly. They just get transposed and + * not mirrored. + */ + MCU_rows = srcinfo->output_width / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[offset_x] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } + } else { + /* Edge blocks are transposed but not mirrored. */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } +} + + +LOCAL(void) +do_rot_180 (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* 180 degree rotation is equivalent to + * 1. Vertical mirroring; + * 2. Horizontal mirroring. + * These two steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JBLOCKROW src_row_ptr, dst_row_ptr; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_width / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_height / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the vertically mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_height - y_crop_blocks - dst_blk_y - + (JDIMENSION) compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } else { + /* Bottom-edge rows are only mirrored horizontally. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_y + y_crop_blocks, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + dst_row_ptr = dst_buffer[offset_y]; + if (y_crop_blocks + dst_blk_y < comp_height) { + /* Row is within the mirrorable area. */ + src_row_ptr = src_buffer[compptr->v_samp_factor - offset_y - 1]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + dst_ptr = dst_row_ptr[dst_blk_x]; + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Process the blocks that can be mirrored both ways. */ + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + for (i = 0; i < DCTSIZE; i += 2) { + /* For even row, negate every odd column. */ + for (j = 0; j < DCTSIZE; j += 2) { + *dst_ptr++ = *src_ptr++; + *dst_ptr++ = - *src_ptr++; + } + /* For odd row, negate every even column. */ + for (j = 0; j < DCTSIZE; j += 2) { + *dst_ptr++ = - *src_ptr++; + *dst_ptr++ = *src_ptr++; + } + } + } else { + /* Any remaining right-edge blocks are only mirrored vertically. */ + src_ptr = src_row_ptr[x_crop_blocks + dst_blk_x]; + for (i = 0; i < DCTSIZE; i += 2) { + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = *src_ptr++; + for (j = 0; j < DCTSIZE; j++) + *dst_ptr++ = - *src_ptr++; + } + } + } + } else { + /* Remaining rows are just mirrored horizontally. */ + src_row_ptr = src_buffer[offset_y]; + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; dst_blk_x++) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Process the blocks that can be mirrored. */ + dst_ptr = dst_row_ptr[dst_blk_x]; + src_ptr = src_row_ptr[comp_width - x_crop_blocks - dst_blk_x - 1]; + for (i = 0; i < DCTSIZE2; i += 2) { + *dst_ptr++ = *src_ptr++; + *dst_ptr++ = - *src_ptr++; + } + } else { + /* Any remaining right-edge blocks are only copied. */ + jcopy_block_row(src_row_ptr + dst_blk_x + x_crop_blocks, + dst_row_ptr + dst_blk_x, + (JDIMENSION) 1); + } + } + } + } + } + } +} + + +LOCAL(void) +do_transverse (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JDIMENSION x_crop_offset, JDIMENSION y_crop_offset, + jvirt_barray_ptr *src_coef_arrays, + jvirt_barray_ptr *dst_coef_arrays) +/* Transverse transpose is equivalent to + * 1. 180 degree rotation; + * 2. Transposition; + * or + * 1. Horizontal mirroring; + * 2. Transposition; + * 3. Horizontal mirroring. + * These steps are merged into a single processing routine. + */ +{ + JDIMENSION MCU_cols, MCU_rows, comp_width, comp_height, dst_blk_x, dst_blk_y; + JDIMENSION x_crop_blocks, y_crop_blocks; + int ci, i, j, offset_x, offset_y; + JBLOCKARRAY src_buffer, dst_buffer; + JCOEFPTR src_ptr, dst_ptr; + jpeg_component_info *compptr; + + MCU_cols = srcinfo->output_height / + (dstinfo->max_h_samp_factor * dstinfo->min_DCT_h_scaled_size); + MCU_rows = srcinfo->output_width / + (dstinfo->max_v_samp_factor * dstinfo->min_DCT_v_scaled_size); + + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + comp_width = MCU_cols * compptr->h_samp_factor; + comp_height = MCU_rows * compptr->v_samp_factor; + x_crop_blocks = x_crop_offset * compptr->h_samp_factor; + y_crop_blocks = y_crop_offset * compptr->v_samp_factor; + for (dst_blk_y = 0; dst_blk_y < compptr->height_in_blocks; + dst_blk_y += compptr->v_samp_factor) { + dst_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, dst_coef_arrays[ci], dst_blk_y, + (JDIMENSION) compptr->v_samp_factor, TRUE); + for (offset_y = 0; offset_y < compptr->v_samp_factor; offset_y++) { + for (dst_blk_x = 0; dst_blk_x < compptr->width_in_blocks; + dst_blk_x += compptr->h_samp_factor) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + comp_width - x_crop_blocks - dst_blk_x - + (JDIMENSION) compptr->h_samp_factor, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } else { + src_buffer = (*srcinfo->mem->access_virt_barray) + ((j_common_ptr) srcinfo, src_coef_arrays[ci], + dst_blk_x + x_crop_blocks, + (JDIMENSION) compptr->h_samp_factor, FALSE); + } + for (offset_x = 0; offset_x < compptr->h_samp_factor; offset_x++) { + dst_ptr = dst_buffer[offset_y][dst_blk_x + offset_x]; + if (y_crop_blocks + dst_blk_y < comp_height) { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Block is within the mirrorable area. */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + i++; + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } else { + /* Right-edge blocks are mirrored in y only */ + src_ptr = src_buffer[offset_x] + [comp_height - y_crop_blocks - dst_blk_y - offset_y - 1]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) { + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + j++; + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } + } + } else { + if (x_crop_blocks + dst_blk_x < comp_width) { + /* Bottom-edge blocks are mirrored in x only */ + src_ptr = src_buffer[compptr->h_samp_factor - offset_x - 1] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + i++; + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = -src_ptr[i*DCTSIZE+j]; + } + } else { + /* At lower right corner, just transpose, no mirroring */ + src_ptr = src_buffer[offset_x] + [dst_blk_y + offset_y + y_crop_blocks]; + for (i = 0; i < DCTSIZE; i++) + for (j = 0; j < DCTSIZE; j++) + dst_ptr[j*DCTSIZE+i] = src_ptr[i*DCTSIZE+j]; + } + } + } + } + } + } + } +} + + +/* Parse an unsigned integer: subroutine for jtransform_parse_crop_spec. + * Returns TRUE if valid integer found, FALSE if not. + * *strptr is advanced over the digit string, and *result is set to its value. + */ + +LOCAL(boolean) +jt_read_integer (const char ** strptr, JDIMENSION * result) +{ + const char * ptr = *strptr; + JDIMENSION val = 0; + + for (; isdigit(*ptr); ptr++) { + val = val * 10 + (JDIMENSION) (*ptr - '0'); + } + *result = val; + if (ptr == *strptr) + return FALSE; /* oops, no digits */ + *strptr = ptr; + return TRUE; +} + + +/* Parse a crop specification (written in X11 geometry style). + * The routine returns TRUE if the spec string is valid, FALSE if not. + * + * The crop spec string should have the format + * <width>x<height>{+-}<xoffset>{+-}<yoffset> + * where width, height, xoffset, and yoffset are unsigned integers. + * Each of the elements can be omitted to indicate a default value. + * (A weakness of this style is that it is not possible to omit xoffset + * while specifying yoffset, since they look alike.) + * + * This code is loosely based on XParseGeometry from the X11 distribution. + */ + +GLOBAL(boolean) +jtransform_parse_crop_spec (jpeg_transform_info *info, const char *spec) +{ + info->crop = FALSE; + info->crop_width_set = JCROP_UNSET; + info->crop_height_set = JCROP_UNSET; + info->crop_xoffset_set = JCROP_UNSET; + info->crop_yoffset_set = JCROP_UNSET; + + if (isdigit(*spec)) { + /* fetch width */ + if (! jt_read_integer(&spec, &info->crop_width)) + return FALSE; + info->crop_width_set = JCROP_POS; + } + if (*spec == 'x' || *spec == 'X') { + /* fetch height */ + spec++; + if (! jt_read_integer(&spec, &info->crop_height)) + return FALSE; + info->crop_height_set = JCROP_POS; + } + if (*spec == '+' || *spec == '-') { + /* fetch xoffset */ + info->crop_xoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; + spec++; + if (! jt_read_integer(&spec, &info->crop_xoffset)) + return FALSE; + } + if (*spec == '+' || *spec == '-') { + /* fetch yoffset */ + info->crop_yoffset_set = (*spec == '-') ? JCROP_NEG : JCROP_POS; + spec++; + if (! jt_read_integer(&spec, &info->crop_yoffset)) + return FALSE; + } + /* We had better have gotten to the end of the string. */ + if (*spec != '\0') + return FALSE; + info->crop = TRUE; + return TRUE; +} + + +/* Trim off any partial iMCUs on the indicated destination edge */ + +LOCAL(void) +trim_right_edge (jpeg_transform_info *info, JDIMENSION full_width) +{ + JDIMENSION MCU_cols; + + MCU_cols = info->output_width / info->iMCU_sample_width; + if (MCU_cols > 0 && info->x_crop_offset + MCU_cols == + full_width / info->iMCU_sample_width) + info->output_width = MCU_cols * info->iMCU_sample_width; +} + +LOCAL(void) +trim_bottom_edge (jpeg_transform_info *info, JDIMENSION full_height) +{ + JDIMENSION MCU_rows; + + MCU_rows = info->output_height / info->iMCU_sample_height; + if (MCU_rows > 0 && info->y_crop_offset + MCU_rows == + full_height / info->iMCU_sample_height) + info->output_height = MCU_rows * info->iMCU_sample_height; +} + + +/* Request any required workspace. + * + * This routine figures out the size that the output image will be + * (which implies that all the transform parameters must be set before + * it is called). + * + * We allocate the workspace virtual arrays from the source decompression + * object, so that all the arrays (both the original data and the workspace) + * will be taken into account while making memory management decisions. + * Hence, this routine must be called after jpeg_read_header (which reads + * the image dimensions) and before jpeg_read_coefficients (which realizes + * the source's virtual arrays). + * + * This function returns FALSE right away if -perfect is given + * and transformation is not perfect. Otherwise returns TRUE. + */ + +GLOBAL(boolean) +jtransform_request_workspace (j_decompress_ptr srcinfo, + jpeg_transform_info *info) +{ + jvirt_barray_ptr *coef_arrays; + boolean need_workspace, transpose_it; + jpeg_component_info *compptr; + JDIMENSION xoffset, yoffset; + JDIMENSION width_in_iMCUs, height_in_iMCUs; + JDIMENSION width_in_blocks, height_in_blocks; + int ci, h_samp_factor, v_samp_factor; + + /* Determine number of components in output image */ + if (info->force_grayscale && + srcinfo->jpeg_color_space == JCS_YCbCr && + srcinfo->num_components == 3) + /* We'll only process the first component */ + info->num_components = 1; + else + /* Process all the components */ + info->num_components = srcinfo->num_components; + + /* Compute output image dimensions and related values. */ + jpeg_core_output_dimensions(srcinfo); + + /* Return right away if -perfect is given and transformation is not perfect. + */ + if (info->perfect) { + if (info->num_components == 1) { + if (!jtransform_perfect_transform(srcinfo->output_width, + srcinfo->output_height, + srcinfo->min_DCT_h_scaled_size, + srcinfo->min_DCT_v_scaled_size, + info->transform)) + return FALSE; + } else { + if (!jtransform_perfect_transform(srcinfo->output_width, + srcinfo->output_height, + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size, + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size, + info->transform)) + return FALSE; + } + } + + /* If there is only one output component, force the iMCU size to be 1; + * else use the source iMCU size. (This allows us to do the right thing + * when reducing color to grayscale, and also provides a handy way of + * cleaning up "funny" grayscale images whose sampling factors are not 1x1.) + */ + switch (info->transform) { + case JXFORM_TRANSPOSE: + case JXFORM_TRANSVERSE: + case JXFORM_ROT_90: + case JXFORM_ROT_270: + info->output_width = srcinfo->output_height; + info->output_height = srcinfo->output_width; + if (info->num_components == 1) { + info->iMCU_sample_width = srcinfo->min_DCT_v_scaled_size; + info->iMCU_sample_height = srcinfo->min_DCT_h_scaled_size; + } else { + info->iMCU_sample_width = + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size; + info->iMCU_sample_height = + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size; + } + break; + default: + info->output_width = srcinfo->output_width; + info->output_height = srcinfo->output_height; + if (info->num_components == 1) { + info->iMCU_sample_width = srcinfo->min_DCT_h_scaled_size; + info->iMCU_sample_height = srcinfo->min_DCT_v_scaled_size; + } else { + info->iMCU_sample_width = + srcinfo->max_h_samp_factor * srcinfo->min_DCT_h_scaled_size; + info->iMCU_sample_height = + srcinfo->max_v_samp_factor * srcinfo->min_DCT_v_scaled_size; + } + break; + } + + /* If cropping has been requested, compute the crop area's position and + * dimensions, ensuring that its upper left corner falls at an iMCU boundary. + */ + if (info->crop) { + /* Insert default values for unset crop parameters */ + if (info->crop_xoffset_set == JCROP_UNSET) + info->crop_xoffset = 0; /* default to +0 */ + if (info->crop_yoffset_set == JCROP_UNSET) + info->crop_yoffset = 0; /* default to +0 */ + if (info->crop_xoffset >= info->output_width || + info->crop_yoffset >= info->output_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + if (info->crop_width_set == JCROP_UNSET) + info->crop_width = info->output_width - info->crop_xoffset; + if (info->crop_height_set == JCROP_UNSET) + info->crop_height = info->output_height - info->crop_yoffset; + /* Ensure parameters are valid */ + if (info->crop_width <= 0 || info->crop_width > info->output_width || + info->crop_height <= 0 || info->crop_height > info->output_height || + info->crop_xoffset > info->output_width - info->crop_width || + info->crop_yoffset > info->output_height - info->crop_height) + ERREXIT(srcinfo, JERR_BAD_CROP_SPEC); + /* Convert negative crop offsets into regular offsets */ + if (info->crop_xoffset_set == JCROP_NEG) + xoffset = info->output_width - info->crop_width - info->crop_xoffset; + else + xoffset = info->crop_xoffset; + if (info->crop_yoffset_set == JCROP_NEG) + yoffset = info->output_height - info->crop_height - info->crop_yoffset; + else + yoffset = info->crop_yoffset; + /* Now adjust so that upper left corner falls at an iMCU boundary */ + info->output_width = + info->crop_width + (xoffset % info->iMCU_sample_width); + info->output_height = + info->crop_height + (yoffset % info->iMCU_sample_height); + /* Save x/y offsets measured in iMCUs */ + info->x_crop_offset = xoffset / info->iMCU_sample_width; + info->y_crop_offset = yoffset / info->iMCU_sample_height; + } else { + info->x_crop_offset = 0; + info->y_crop_offset = 0; + } + + /* Figure out whether we need workspace arrays, + * and if so whether they are transposed relative to the source. + */ + need_workspace = FALSE; + transpose_it = FALSE; + switch (info->transform) { + case JXFORM_NONE: + if (info->x_crop_offset != 0 || info->y_crop_offset != 0) + need_workspace = TRUE; + /* No workspace needed if neither cropping nor transforming */ + break; + case JXFORM_FLIP_H: + if (info->trim) + trim_right_edge(info, srcinfo->output_width); + if (info->y_crop_offset != 0) + need_workspace = TRUE; + /* do_flip_h_no_crop doesn't need a workspace array */ + break; + case JXFORM_FLIP_V: + if (info->trim) + trim_bottom_edge(info, srcinfo->output_height); + /* Need workspace arrays having same dimensions as source image. */ + need_workspace = TRUE; + break; + case JXFORM_TRANSPOSE: + /* transpose does NOT have to trim anything */ + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_TRANSVERSE: + if (info->trim) { + trim_right_edge(info, srcinfo->output_height); + trim_bottom_edge(info, srcinfo->output_width); + } + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_ROT_90: + if (info->trim) + trim_right_edge(info, srcinfo->output_height); + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + case JXFORM_ROT_180: + if (info->trim) { + trim_right_edge(info, srcinfo->output_width); + trim_bottom_edge(info, srcinfo->output_height); + } + /* Need workspace arrays having same dimensions as source image. */ + need_workspace = TRUE; + break; + case JXFORM_ROT_270: + if (info->trim) + trim_bottom_edge(info, srcinfo->output_width); + /* Need workspace arrays having transposed dimensions. */ + need_workspace = TRUE; + transpose_it = TRUE; + break; + } + + /* Allocate workspace if needed. + * Note that we allocate arrays padded out to the next iMCU boundary, + * so that transform routines need not worry about missing edge blocks. + */ + if (need_workspace) { + coef_arrays = (jvirt_barray_ptr *) + (*srcinfo->mem->alloc_small) ((j_common_ptr) srcinfo, JPOOL_IMAGE, + SIZEOF(jvirt_barray_ptr) * info->num_components); + width_in_iMCUs = (JDIMENSION) + jdiv_round_up((long) info->output_width, + (long) info->iMCU_sample_width); + height_in_iMCUs = (JDIMENSION) + jdiv_round_up((long) info->output_height, + (long) info->iMCU_sample_height); + for (ci = 0; ci < info->num_components; ci++) { + compptr = srcinfo->comp_info + ci; + if (info->num_components == 1) { + /* we're going to force samp factors to 1x1 in this case */ + h_samp_factor = v_samp_factor = 1; + } else if (transpose_it) { + h_samp_factor = compptr->v_samp_factor; + v_samp_factor = compptr->h_samp_factor; + } else { + h_samp_factor = compptr->h_samp_factor; + v_samp_factor = compptr->v_samp_factor; + } + width_in_blocks = width_in_iMCUs * h_samp_factor; + height_in_blocks = height_in_iMCUs * v_samp_factor; + coef_arrays[ci] = (*srcinfo->mem->request_virt_barray) + ((j_common_ptr) srcinfo, JPOOL_IMAGE, FALSE, + width_in_blocks, height_in_blocks, (JDIMENSION) v_samp_factor); + } + info->workspace_coef_arrays = coef_arrays; + } else + info->workspace_coef_arrays = NULL; + + return TRUE; +} + + +/* Transpose destination image parameters */ + +LOCAL(void) +transpose_critical_parameters (j_compress_ptr dstinfo) +{ + int tblno, i, j, ci, itemp; + jpeg_component_info *compptr; + JQUANT_TBL *qtblptr; + JDIMENSION jtemp; + UINT16 qtemp; + + /* Transpose image dimensions */ + jtemp = dstinfo->image_width; + dstinfo->image_width = dstinfo->image_height; + dstinfo->image_height = jtemp; + itemp = dstinfo->min_DCT_h_scaled_size; + dstinfo->min_DCT_h_scaled_size = dstinfo->min_DCT_v_scaled_size; + dstinfo->min_DCT_v_scaled_size = itemp; + + /* Transpose sampling factors */ + for (ci = 0; ci < dstinfo->num_components; ci++) { + compptr = dstinfo->comp_info + ci; + itemp = compptr->h_samp_factor; + compptr->h_samp_factor = compptr->v_samp_factor; + compptr->v_samp_factor = itemp; + } + + /* Transpose quantization tables */ + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + qtblptr = dstinfo->quant_tbl_ptrs[tblno]; + if (qtblptr != NULL) { + for (i = 0; i < DCTSIZE; i++) { + for (j = 0; j < i; j++) { + qtemp = qtblptr->quantval[i*DCTSIZE+j]; + qtblptr->quantval[i*DCTSIZE+j] = qtblptr->quantval[j*DCTSIZE+i]; + qtblptr->quantval[j*DCTSIZE+i] = qtemp; + } + } + } + } +} + + +/* Adjust Exif image parameters. + * + * We try to adjust the Tags ExifImageWidth and ExifImageHeight if possible. + */ + +LOCAL(void) +adjust_exif_parameters (JOCTET FAR * data, unsigned int length, + JDIMENSION new_width, JDIMENSION new_height) +{ + boolean is_motorola; /* Flag for byte order */ + unsigned int number_of_tags, tagnum; + unsigned int firstoffset, offset; + JDIMENSION new_value; + + if (length < 12) return; /* Length of an IFD entry */ + + /* Discover byte order */ + if (GETJOCTET(data[0]) == 0x49 && GETJOCTET(data[1]) == 0x49) + is_motorola = FALSE; + else if (GETJOCTET(data[0]) == 0x4D && GETJOCTET(data[1]) == 0x4D) + is_motorola = TRUE; + else + return; + + /* Check Tag Mark */ + if (is_motorola) { + if (GETJOCTET(data[2]) != 0) return; + if (GETJOCTET(data[3]) != 0x2A) return; + } else { + if (GETJOCTET(data[3]) != 0) return; + if (GETJOCTET(data[2]) != 0x2A) return; + } + + /* Get first IFD offset (offset to IFD0) */ + if (is_motorola) { + if (GETJOCTET(data[4]) != 0) return; + if (GETJOCTET(data[5]) != 0) return; + firstoffset = GETJOCTET(data[6]); + firstoffset <<= 8; + firstoffset += GETJOCTET(data[7]); + } else { + if (GETJOCTET(data[7]) != 0) return; + if (GETJOCTET(data[6]) != 0) return; + firstoffset = GETJOCTET(data[5]); + firstoffset <<= 8; + firstoffset += GETJOCTET(data[4]); + } + if (firstoffset > length - 2) return; /* check end of data segment */ + + /* Get the number of directory entries contained in this IFD */ + if (is_motorola) { + number_of_tags = GETJOCTET(data[firstoffset]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[firstoffset+1]); + } else { + number_of_tags = GETJOCTET(data[firstoffset+1]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[firstoffset]); + } + if (number_of_tags == 0) return; + firstoffset += 2; + + /* Search for ExifSubIFD offset Tag in IFD0 */ + for (;;) { + if (firstoffset > length - 12) return; /* check end of data segment */ + /* Get Tag number */ + if (is_motorola) { + tagnum = GETJOCTET(data[firstoffset]); + tagnum <<= 8; + tagnum += GETJOCTET(data[firstoffset+1]); + } else { + tagnum = GETJOCTET(data[firstoffset+1]); + tagnum <<= 8; + tagnum += GETJOCTET(data[firstoffset]); + } + if (tagnum == 0x8769) break; /* found ExifSubIFD offset Tag */ + if (--number_of_tags == 0) return; + firstoffset += 12; + } + + /* Get the ExifSubIFD offset */ + if (is_motorola) { + if (GETJOCTET(data[firstoffset+8]) != 0) return; + if (GETJOCTET(data[firstoffset+9]) != 0) return; + offset = GETJOCTET(data[firstoffset+10]); + offset <<= 8; + offset += GETJOCTET(data[firstoffset+11]); + } else { + if (GETJOCTET(data[firstoffset+11]) != 0) return; + if (GETJOCTET(data[firstoffset+10]) != 0) return; + offset = GETJOCTET(data[firstoffset+9]); + offset <<= 8; + offset += GETJOCTET(data[firstoffset+8]); + } + if (offset > length - 2) return; /* check end of data segment */ + + /* Get the number of directory entries contained in this SubIFD */ + if (is_motorola) { + number_of_tags = GETJOCTET(data[offset]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[offset+1]); + } else { + number_of_tags = GETJOCTET(data[offset+1]); + number_of_tags <<= 8; + number_of_tags += GETJOCTET(data[offset]); + } + if (number_of_tags < 2) return; + offset += 2; + + /* Search for ExifImageWidth and ExifImageHeight Tags in this SubIFD */ + do { + if (offset > length - 12) return; /* check end of data segment */ + /* Get Tag number */ + if (is_motorola) { + tagnum = GETJOCTET(data[offset]); + tagnum <<= 8; + tagnum += GETJOCTET(data[offset+1]); + } else { + tagnum = GETJOCTET(data[offset+1]); + tagnum <<= 8; + tagnum += GETJOCTET(data[offset]); + } + if (tagnum == 0xA002 || tagnum == 0xA003) { + if (tagnum == 0xA002) + new_value = new_width; /* ExifImageWidth Tag */ + else + new_value = new_height; /* ExifImageHeight Tag */ + if (is_motorola) { + data[offset+2] = 0; /* Format = unsigned long (4 octets) */ + data[offset+3] = 4; + data[offset+4] = 0; /* Number Of Components = 1 */ + data[offset+5] = 0; + data[offset+6] = 0; + data[offset+7] = 1; + data[offset+8] = 0; + data[offset+9] = 0; + data[offset+10] = (JOCTET)((new_value >> 8) & 0xFF); + data[offset+11] = (JOCTET)(new_value & 0xFF); + } else { + data[offset+2] = 4; /* Format = unsigned long (4 octets) */ + data[offset+3] = 0; + data[offset+4] = 1; /* Number Of Components = 1 */ + data[offset+5] = 0; + data[offset+6] = 0; + data[offset+7] = 0; + data[offset+8] = (JOCTET)(new_value & 0xFF); + data[offset+9] = (JOCTET)((new_value >> 8) & 0xFF); + data[offset+10] = 0; + data[offset+11] = 0; + } + } + offset += 12; + } while (--number_of_tags); +} + + +/* Adjust output image parameters as needed. + * + * This must be called after jpeg_copy_critical_parameters() + * and before jpeg_write_coefficients(). + * + * The return value is the set of virtual coefficient arrays to be written + * (either the ones allocated by jtransform_request_workspace, or the + * original source data arrays). The caller will need to pass this value + * to jpeg_write_coefficients(). + */ + +GLOBAL(jvirt_barray_ptr *) +jtransform_adjust_parameters (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info) +{ + /* If force-to-grayscale is requested, adjust destination parameters */ + if (info->force_grayscale) { + /* First, ensure we have YCbCr or grayscale data, and that the source's + * Y channel is full resolution. (No reasonable person would make Y + * be less than full resolution, so actually coping with that case + * isn't worth extra code space. But we check it to avoid crashing.) + */ + if (((dstinfo->jpeg_color_space == JCS_YCbCr && + dstinfo->num_components == 3) || + (dstinfo->jpeg_color_space == JCS_GRAYSCALE && + dstinfo->num_components == 1)) && + srcinfo->comp_info[0].h_samp_factor == srcinfo->max_h_samp_factor && + srcinfo->comp_info[0].v_samp_factor == srcinfo->max_v_samp_factor) { + /* We use jpeg_set_colorspace to make sure subsidiary settings get fixed + * properly. Among other things, it sets the target h_samp_factor & + * v_samp_factor to 1, which typically won't match the source. + * We have to preserve the source's quantization table number, however. + */ + int sv_quant_tbl_no = dstinfo->comp_info[0].quant_tbl_no; + jpeg_set_colorspace(dstinfo, JCS_GRAYSCALE); + dstinfo->comp_info[0].quant_tbl_no = sv_quant_tbl_no; + } else { + /* Sorry, can't do it */ + ERREXIT(dstinfo, JERR_CONVERSION_NOTIMPL); + } + } else if (info->num_components == 1) { + /* For a single-component source, we force the destination sampling factors + * to 1x1, with or without force_grayscale. This is useful because some + * decoders choke on grayscale images with other sampling factors. + */ + dstinfo->comp_info[0].h_samp_factor = 1; + dstinfo->comp_info[0].v_samp_factor = 1; + } + + /* Correct the destination's image dimensions as necessary + * for rotate/flip, resize, and crop operations. + */ + dstinfo->jpeg_width = info->output_width; + dstinfo->jpeg_height = info->output_height; + + /* Transpose destination image parameters */ + switch (info->transform) { + case JXFORM_TRANSPOSE: + case JXFORM_TRANSVERSE: + case JXFORM_ROT_90: + case JXFORM_ROT_270: + transpose_critical_parameters(dstinfo); + break; + default: + break; + } + + /* Adjust Exif properties */ + if (srcinfo->marker_list != NULL && + srcinfo->marker_list->marker == JPEG_APP0+1 && + srcinfo->marker_list->data_length >= 6 && + GETJOCTET(srcinfo->marker_list->data[0]) == 0x45 && + GETJOCTET(srcinfo->marker_list->data[1]) == 0x78 && + GETJOCTET(srcinfo->marker_list->data[2]) == 0x69 && + GETJOCTET(srcinfo->marker_list->data[3]) == 0x66 && + GETJOCTET(srcinfo->marker_list->data[4]) == 0 && + GETJOCTET(srcinfo->marker_list->data[5]) == 0) { + /* Suppress output of JFIF marker */ + dstinfo->write_JFIF_header = FALSE; + /* Adjust Exif image parameters */ + if (dstinfo->jpeg_width != srcinfo->image_width || + dstinfo->jpeg_height != srcinfo->image_height) + /* Align data segment to start of TIFF structure for parsing */ + adjust_exif_parameters(srcinfo->marker_list->data + 6, + srcinfo->marker_list->data_length - 6, + dstinfo->jpeg_width, dstinfo->jpeg_height); + } + + /* Return the appropriate output data set */ + if (info->workspace_coef_arrays != NULL) + return info->workspace_coef_arrays; + return src_coef_arrays; +} + + +/* Execute the actual transformation, if any. + * + * This must be called *after* jpeg_write_coefficients, because it depends + * on jpeg_write_coefficients to have computed subsidiary values such as + * the per-component width and height fields in the destination object. + * + * Note that some transformations will modify the source data arrays! + */ + +GLOBAL(void) +jtransform_execute_transform (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info) +{ + jvirt_barray_ptr *dst_coef_arrays = info->workspace_coef_arrays; + + /* Note: conditions tested here should match those in switch statement + * in jtransform_request_workspace() + */ + switch (info->transform) { + case JXFORM_NONE: + if (info->x_crop_offset != 0 || info->y_crop_offset != 0) + do_crop(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_FLIP_H: + if (info->y_crop_offset != 0) + do_flip_h(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + else + do_flip_h_no_crop(srcinfo, dstinfo, info->x_crop_offset, + src_coef_arrays); + break; + case JXFORM_FLIP_V: + do_flip_v(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_TRANSPOSE: + do_transpose(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_TRANSVERSE: + do_transverse(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_90: + do_rot_90(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_180: + do_rot_180(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + case JXFORM_ROT_270: + do_rot_270(srcinfo, dstinfo, info->x_crop_offset, info->y_crop_offset, + src_coef_arrays, dst_coef_arrays); + break; + } +} + +/* jtransform_perfect_transform + * + * Determine whether lossless transformation is perfectly + * possible for a specified image and transformation. + * + * Inputs: + * image_width, image_height: source image dimensions. + * MCU_width, MCU_height: pixel dimensions of MCU. + * transform: transformation identifier. + * Parameter sources from initialized jpeg_struct + * (after reading source header): + * image_width = cinfo.image_width + * image_height = cinfo.image_height + * MCU_width = cinfo.max_h_samp_factor * cinfo.block_size + * MCU_height = cinfo.max_v_samp_factor * cinfo.block_size + * Result: + * TRUE = perfect transformation possible + * FALSE = perfect transformation not possible + * (may use custom action then) + */ + +GLOBAL(boolean) +jtransform_perfect_transform(JDIMENSION image_width, JDIMENSION image_height, + int MCU_width, int MCU_height, + JXFORM_CODE transform) +{ + boolean result = TRUE; /* initialize TRUE */ + + switch (transform) { + case JXFORM_FLIP_H: + case JXFORM_ROT_270: + if (image_width % (JDIMENSION) MCU_width) + result = FALSE; + break; + case JXFORM_FLIP_V: + case JXFORM_ROT_90: + if (image_height % (JDIMENSION) MCU_height) + result = FALSE; + break; + case JXFORM_TRANSVERSE: + case JXFORM_ROT_180: + if (image_width % (JDIMENSION) MCU_width) + result = FALSE; + if (image_height % (JDIMENSION) MCU_height) + result = FALSE; + break; + default: + break; + } + + return result; +} + +#endif /* TRANSFORMS_SUPPORTED */ + + +/* Setup decompression object to save desired markers in memory. + * This must be called before jpeg_read_header() to have the desired effect. + */ + +GLOBAL(void) +jcopy_markers_setup (j_decompress_ptr srcinfo, JCOPY_OPTION option) +{ +#ifdef SAVE_MARKERS_SUPPORTED + int m; + + /* Save comments except under NONE option */ + if (option != JCOPYOPT_NONE) { + jpeg_save_markers(srcinfo, JPEG_COM, 0xFFFF); + } + /* Save all types of APPn markers iff ALL option */ + if (option == JCOPYOPT_ALL) { + for (m = 0; m < 16; m++) + jpeg_save_markers(srcinfo, JPEG_APP0 + m, 0xFFFF); + } +#endif /* SAVE_MARKERS_SUPPORTED */ +} + +/* Copy markers saved in the given source object to the destination object. + * This should be called just after jpeg_start_compress() or + * jpeg_write_coefficients(). + * Note that those routines will have written the SOI, and also the + * JFIF APP0 or Adobe APP14 markers if selected. + */ + +GLOBAL(void) +jcopy_markers_execute (j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JCOPY_OPTION option) +{ + jpeg_saved_marker_ptr marker; + + /* In the current implementation, we don't actually need to examine the + * option flag here; we just copy everything that got saved. + * But to avoid confusion, we do not output JFIF and Adobe APP14 markers + * if the encoder library already wrote one. + */ + for (marker = srcinfo->marker_list; marker != NULL; marker = marker->next) { + if (dstinfo->write_JFIF_header && + marker->marker == JPEG_APP0 && + marker->data_length >= 5 && + GETJOCTET(marker->data[0]) == 0x4A && + GETJOCTET(marker->data[1]) == 0x46 && + GETJOCTET(marker->data[2]) == 0x49 && + GETJOCTET(marker->data[3]) == 0x46 && + GETJOCTET(marker->data[4]) == 0) + continue; /* reject duplicate JFIF */ + if (dstinfo->write_Adobe_marker && + marker->marker == JPEG_APP0+14 && + marker->data_length >= 5 && + GETJOCTET(marker->data[0]) == 0x41 && + GETJOCTET(marker->data[1]) == 0x64 && + GETJOCTET(marker->data[2]) == 0x6F && + GETJOCTET(marker->data[3]) == 0x62 && + GETJOCTET(marker->data[4]) == 0x65) + continue; /* reject duplicate Adobe */ +#ifdef NEED_FAR_POINTERS + /* We could use jpeg_write_marker if the data weren't FAR... */ + { + unsigned int i; + jpeg_write_m_header(dstinfo, marker->marker, marker->data_length); + for (i = 0; i < marker->data_length; i++) + jpeg_write_m_byte(dstinfo, marker->data[i]); + } +#else + jpeg_write_marker(dstinfo, marker->marker, + marker->data, marker->data_length); +#endif + } +} diff --git a/jpeg/80/transupp.h b/jpeg/80/transupp.h new file mode 100644 index 0000000..7c16c19 --- /dev/null +++ b/jpeg/80/transupp.h @@ -0,0 +1,210 @@ +/* + * transupp.h + * + * Copyright (C) 1997-2009, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains declarations for image transformation routines and + * other utility code used by the jpegtran sample application. These are + * NOT part of the core JPEG library. But we keep these routines separate + * from jpegtran.c to ease the task of maintaining jpegtran-like programs + * that have other user interfaces. + * + * NOTE: all the routines declared here have very specific requirements + * about when they are to be executed during the reading and writing of the + * source and destination files. See the comments in transupp.c, or see + * jpegtran.c for an example of correct usage. + */ + +/* If you happen not to want the image transform support, disable it here */ +#ifndef TRANSFORMS_SUPPORTED +#define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */ +#endif + +/* + * Although rotating and flipping data expressed as DCT coefficients is not + * hard, there is an asymmetry in the JPEG format specification for images + * whose dimensions aren't multiples of the iMCU size. The right and bottom + * image edges are padded out to the next iMCU boundary with junk data; but + * no padding is possible at the top and left edges. If we were to flip + * the whole image including the pad data, then pad garbage would become + * visible at the top and/or left, and real pixels would disappear into the + * pad margins --- perhaps permanently, since encoders & decoders may not + * bother to preserve DCT blocks that appear to be completely outside the + * nominal image area. So, we have to exclude any partial iMCUs from the + * basic transformation. + * + * Transpose is the only transformation that can handle partial iMCUs at the + * right and bottom edges completely cleanly. flip_h can flip partial iMCUs + * at the bottom, but leaves any partial iMCUs at the right edge untouched. + * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched. + * The other transforms are defined as combinations of these basic transforms + * and process edge blocks in a way that preserves the equivalence. + * + * The "trim" option causes untransformable partial iMCUs to be dropped; + * this is not strictly lossless, but it usually gives the best-looking + * result for odd-size images. Note that when this option is active, + * the expected mathematical equivalences between the transforms may not hold. + * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim + * followed by -rot 180 -trim trims both edges.) + * + * We also offer a lossless-crop option, which discards data outside a given + * image region but losslessly preserves what is inside. Like the rotate and + * flip transforms, lossless crop is restricted by the JPEG format: the upper + * left corner of the selected region must fall on an iMCU boundary. If this + * does not hold for the given crop parameters, we silently move the upper left + * corner up and/or left to make it so, simultaneously increasing the region + * dimensions to keep the lower right crop corner unchanged. (Thus, the + * output image covers at least the requested region, but may cover more.) + * + * We also provide a lossless-resize option, which is kind of a lossless-crop + * operation in the DCT coefficient block domain - it discards higher-order + * coefficients and losslessly preserves lower-order coefficients of a + * sub-block. + * + * Rotate/flip transform, resize, and crop can be requested together in a + * single invocation. The crop is applied last --- that is, the crop region + * is specified in terms of the destination image after transform/resize. + * + * We also offer a "force to grayscale" option, which simply discards the + * chrominance channels of a YCbCr image. This is lossless in the sense that + * the luminance channel is preserved exactly. It's not the same kind of + * thing as the rotate/flip transformations, but it's convenient to handle it + * as part of this package, mainly because the transformation routines have to + * be aware of the option to know how many components to work on. + */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jtransform_parse_crop_spec jTrParCrop +#define jtransform_request_workspace jTrRequest +#define jtransform_adjust_parameters jTrAdjust +#define jtransform_execute_transform jTrExec +#define jtransform_perfect_transform jTrPerfect +#define jcopy_markers_setup jCMrkSetup +#define jcopy_markers_execute jCMrkExec +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * Codes for supported types of image transformations. + */ + +typedef enum { + JXFORM_NONE, /* no transformation */ + JXFORM_FLIP_H, /* horizontal flip */ + JXFORM_FLIP_V, /* vertical flip */ + JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */ + JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */ + JXFORM_ROT_90, /* 90-degree clockwise rotation */ + JXFORM_ROT_180, /* 180-degree rotation */ + JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */ +} JXFORM_CODE; + +/* + * Codes for crop parameters, which can individually be unspecified, + * positive, or negative. (Negative width or height makes no sense, though.) + */ + +typedef enum { + JCROP_UNSET, + JCROP_POS, + JCROP_NEG +} JCROP_CODE; + +/* + * Transform parameters struct. + * NB: application must not change any elements of this struct after + * calling jtransform_request_workspace. + */ + +typedef struct { + /* Options: set by caller */ + JXFORM_CODE transform; /* image transform operator */ + boolean perfect; /* if TRUE, fail if partial MCUs are requested */ + boolean trim; /* if TRUE, trim partial MCUs as needed */ + boolean force_grayscale; /* if TRUE, convert color image to grayscale */ + boolean crop; /* if TRUE, crop source image */ + + /* Crop parameters: application need not set these unless crop is TRUE. + * These can be filled in by jtransform_parse_crop_spec(). + */ + JDIMENSION crop_width; /* Width of selected region */ + JCROP_CODE crop_width_set; + JDIMENSION crop_height; /* Height of selected region */ + JCROP_CODE crop_height_set; + JDIMENSION crop_xoffset; /* X offset of selected region */ + JCROP_CODE crop_xoffset_set; /* (negative measures from right edge) */ + JDIMENSION crop_yoffset; /* Y offset of selected region */ + JCROP_CODE crop_yoffset_set; /* (negative measures from bottom edge) */ + + /* Internal workspace: caller should not touch these */ + int num_components; /* # of components in workspace */ + jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */ + JDIMENSION output_width; /* cropped destination dimensions */ + JDIMENSION output_height; + JDIMENSION x_crop_offset; /* destination crop offsets measured in iMCUs */ + JDIMENSION y_crop_offset; + int iMCU_sample_width; /* destination iMCU size */ + int iMCU_sample_height; +} jpeg_transform_info; + + +#if TRANSFORMS_SUPPORTED + +/* Parse a crop specification (written in X11 geometry style) */ +EXTERN(boolean) jtransform_parse_crop_spec + JPP((jpeg_transform_info *info, const char *spec)); +/* Request any required workspace */ +EXTERN(boolean) jtransform_request_workspace + JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info)); +/* Adjust output image parameters */ +EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Execute the actual transformation, if any */ +EXTERN(void) jtransform_execute_transform + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Determine whether lossless transformation is perfectly + * possible for a specified image and transformation. + */ +EXTERN(boolean) jtransform_perfect_transform + JPP((JDIMENSION image_width, JDIMENSION image_height, + int MCU_width, int MCU_height, + JXFORM_CODE transform)); + +/* jtransform_execute_transform used to be called + * jtransform_execute_transformation, but some compilers complain about + * routine names that long. This macro is here to avoid breaking any + * old source code that uses the original name... + */ +#define jtransform_execute_transformation jtransform_execute_transform + +#endif /* TRANSFORMS_SUPPORTED */ + + +/* + * Support for copying optional markers from source to destination file. + */ + +typedef enum { + JCOPYOPT_NONE, /* copy no optional markers */ + JCOPYOPT_COMMENTS, /* copy only comment (COM) markers */ + JCOPYOPT_ALL /* copy all optional markers */ +} JCOPY_OPTION; + +#define JCOPYOPT_DEFAULT JCOPYOPT_COMMENTS /* recommended default */ + +/* Setup decompression object to save desired markers in memory */ +EXTERN(void) jcopy_markers_setup + JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option)); +/* Copy markers saved in the given source object to the destination object */ +EXTERN(void) jcopy_markers_execute + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JCOPY_OPTION option)); |