Merge tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

First set of new device support, features and cleanups for IIO in the 5.11 cycle

Usual mixed bag of new drivers / device support + cleanups etc with the
addition of a fairly big set of yaml conversions.

Txt to yaml format conversions.
In some cases dropped separate binding and moved to trivial devices (drop).

Listed by manufacturer
  - dht11 temperature(drop)
  - adi,ad2s90 adi,ad5272 adi,ad5592r adi,ad5758 adi,ad5933 adi,ad7303
    adi,adis16480 adi,adf4350
  - ams,as3935
  - asahi-kasei,ak8974
  - atmel,sama5d2-adc
  - avago,apds9300 avago,apds9960
  - bosch,bma180 bosch,bmc150_magn bosch,bme680 bosch,bmg180
  - brcm,iproc-static-adc
  - capella,cm36651
  - domintech,dmard06(drop)
  - fsl,mag3110 fsl,mma8452 fsl,vf610-dac
  - hoperf,hp03
  - honeywell,hmc5843
  - kionix,kxcjk1013
  - maxim,ds1803(drop) maxim,ds4424 maxim,max30100 maxim,max30102
    maxim,max31856 maxim,max31855k maxim,max44009
    maxim,max5481 maxim,max5821
  - meas,htu21(drop) meas,ms5367(drop) meas,ms5611 meas,tsys01(drop)
  - mediatek,mt2701-auxadc
  - melexis,mlx90614 melexis,mlx90632
  - memsic,mmc35240(drop)
  - microchip,mcp41010 microchip,mcp4131 microchip,mcp4725
  - murata,zap2326
  - nxp,fxas21002c nxp,lpc1850-dac
  - pni,rm3100
  - qcom,pm8018-adc qcom,spmi-iadc
  - renesas,isl29501 renesas,rcar-gyroadc
  - samsung,sensorhub-rinato
  - sensiron,sgp30
  - sentech,sx9500
  - sharp,gp2ap020a00f
  - st,hts221 st,lsm6dsx st,st-sensors(many!) st,uvis25 st,vcl53l0x st,vl6180
  - ti,adc084s021 ti,ads124s08
    ti,dac5571 ti,dac7311 ti,dac7512 ti,dac7612
    ti,hdc1000(drop) ti,palmas-gpadc ti,opt3001 ti,tmp07
  - upisemi,us51882
  - vishay,vcnl4035
  - x-powers,axp209

New device support
* adi,ad5685
  - Add support for AD5338R dual output 10-bit DAC
  - Add DT-binding doc.
* mediatek,mt6360
  - New driver for this SoC ADC with bindings and using new channel label
    support in the IIO core.
* st,lsm6dsx
  - Add support for LSM6DST

Core:
* Add "label" to device channels, provided via a new core callback. Including
  DT docs for when that is the source, and ABI docs.
* Add devm_iio_triggered_buffer_setup_ext to take extra attributes.
* dmaengine, unwrap use of iio_buffer_set_attrs()
* Drop iio_buffer_set_attrs()
* Centralize ioctl call handling. Later fix to ensure -EINVAL returned if
  no handler has run.
* Fix an issue with IIO_VAL_FRACTIONAL and negative values - doesn't affect
  any known existing drivers, but will impact a future one.
* kernel-doc fix in trigger.h
* file-ops ordering cleanup

Features
* semtech,sx9310
  - Add control of hardware gain, proximity thresholds, hysteresis and
    debounce.
  - Increase what information on hardware configuration can be provided
    via DT.

Cleanup and minor features
* adi,ad5685
  - Add of_match_table
* adi,ad7292
  - Drop pointless spi_set_drvdata() call
* adi,ad7298
  - Drop platform data and tidy up external reference config.
* adi,ad7303
  - Drop platform data handling as unused.
* adi,ad7768
  - Add new label attribute for channels provided from dt.
* adi,ad7887
  - devm_ usage in probe simplifying remove and error handling.
* adi,adis16201
  - Drop pointless spi_set_drvdata() call
* adi,adis16209
  - Drop pointless spi_set_drvdata() call
* adi,adis16240
  - White space fixup
* adi,adxl372
  - use new devm_iio_triggered-buffer_setup_ext()
* amlogic,meson-saradc
  - Drop pointless semicolon.
* amstaos,tsl2563
  - Put back i2c_device_id table as needed for greybus probing.
* atmel,at91_adc
  - Use of_device_get_match_data() instead of open coding it.
  - Constify some driver data
  - Add KCONFIG dep on CONFIG_OF and drop of_match_ptr()
  - Drop platform data as mostly dead code.
  - Tidy up reference voltage logic
* atmel-sama5d2
  - Drop a pointless semicolon
  - Merge buffer and trigger init into a separate function
  - Use new devm_iio_triggered_buff_setup_ext()
* avago,apds9960
  - Drop a pointless semicolon
* bosch,bmc150
  - Drop a pointless semicolon
  - Use new iio_triggered_buffer_setup_ext()
* bosch,bmp280
  - Drop a pointless semicolon
* fsl,mma8452
  - Constification
* (google),cros_ec
  - Use new devm_iio_triggered_buffer_setup_ext()
* hid-sensors
  - Use new iio_triggered_buffer_setup_ext()
* ingenic,adc
  - Drop a pointless semicolon
* invensense,icm426xx
  - Fix MAINTAINERS entry missing :
* mediatek,mt6577_audxac
  - Add binding doc for mt8516 compatible with mt8173
* motorola,cpcap-adc
  - Fix an implicit fallthrough marking that clang needs to avoid warning.
* samsung,exynos-adc
  - Stop relying on users counter form input device in ISR.
* st,lsm6dsx
  - add vdd and vddio regulator control (including binding update)
* st,stm32-adc
  - Tidy up code for dma transfers.
  - Adapt clock duty cycle for proper functioning. Note no known problems
    with existing boards.
* st,vl53l0x-i2c
  - Put back i2c_device_id table as needed for greybus probing.
* vishay,vcnl4035
  - Put back i2c_device_id table as needed for greybus probing.

* tag 'iio-for-5.11a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (126 commits)
  dt-bindings:iio:adc:x-powers,axp209-adc: txt to yaml conversion
  dt-bindings:iio:adc:renesas,rcar-gyroadc: txt to yaml conversion.
  dt-bindings:iio:adc:atmel,sama5d2-adc: txt to yaml conversion
  dt-bindings:iio:magnetometer:pni,rm3100: txt to yaml conversion.
  dt-bindings:iio:magnetometer:honeywell,hmc5843: txt to yaml format conversion
  dt-bindings:iio:magnetometer:bosch,bmc150_magn: txt to yaml conversion.
  dt-bindings:iio:magnetometer:asahi-kasei,ak8974: txt to yaml format conversion
  dt-bindings:iio:magnetometer:fsl,mag3110: txt to yaml conversion
  dt-bindings:iio:light:st,vl6180: txt to yaml format conversion.
  dt-bindings:iio:light:vishay,vcnl4035: txt to yaml conversion
  dt-bindings:iio:light:st,uvis25: txt to yaml conversion for this UV sensor
  dt-bindings:iio:light:upisemi,us51882: txt to yaml conversion.
  dt-bindings:iio:light:ti,opt3001: txt to yaml conversion
  dt-bindings:iio:light:maxim,max44009: txt to yaml conversion.
  dt-bindings:iio:light:sharp,gp2ap020a00f: txt to yaml conversion.
  dt-bindings:iio:light:capella,cm36651: txt to yaml conversion.
  dt-bindings:iio:light:avago,apds9960: txt to yaml conversion
  dt-bindings:iio:light:avago,apds9300: txt to yaml conversion.
  dt-bindings:iio:imu:st,lsm6dsx: txt to yaml conversion
  dt-bindings:iio:imu:adi,adis16480: txt to yaml conversion
  ...

7 files changed, 226 insertions, 75 deletions

diff --git a/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
new file mode 100644
index 000000000000..7fcba5d6d508
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/ams,as3935.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/ams,as3935.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Austrian Microsystems AS3935 Franklin lightning sensor
+
+maintainers:
+  - Matt Ranostay <matt.ranostay@konsulko.com>
+
+description:
+  This lightening distance sensor uses an I2C or SPI interface. The
+  binding currently only covers the SPI option.
+
+properties:
+  compatible:
+    const: ams,as3935
+
+  reg:
+    maxItems: 1
+
+  spi-max-frequency:
+    maximum: 2000000
+
+  spi-cpha: true
+
+  interrupts:
+    maxItems: 1
+
+  ams,tuning-capacitor-pf:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Calibration tuning capacitor stepping value. This will require using
+      the calibration data from the manufacturer.
+    minimum: 0
+    maximum: 120
+
+  ams,nflwdth:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Set the noise and watchdog threshold register on startup. This will
+      need to set according to the noise from the MCU board, and possibly
+      the local environment. Refer to the datasheet for the threshold settings.
+
+required:
+  - compatible
+  - reg
+  - spi-cpha
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+    lightning@0 {
+            compatible = "ams,as3935";
+            reg = <0>;
+            spi-max-frequency = <400000>;
+            spi-cpha;
+            interrupt-parent = <&gpio1>;
+            interrupts = <16 1>;
+            ams,tuning-capacitor-pf = <80>;
+            ams,nflwdth = <0x44>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/as3935.txt b/Documentation/devicetree/bindings/iio/proximity/as3935.txt
deleted file mode 100644
index 849115585d55..000000000000
--- a/Documentation/devicetree/bindings/iio/proximity/as3935.txt
+++ /dev/null
@@ -1,34 +0,0 @@
-Austrian Microsystems AS3935 Franklin lightning sensor device driver
-
-Required properties:
-	- compatible: must be "ams,as3935"
-	- reg: SPI chip select number for the device
-	- spi-max-frequency: specifies maximum SPI clock frequency
-	- spi-cpha: SPI Mode 1. Refer to spi/spi-bus.txt for generic SPI
-	slave node bindings.
-	- interrupts : the sole interrupt generated by the device
-
-	Refer to interrupt-controller/interrupts.txt for generic
-	interrupt client node bindings.
-
-Optional properties:
-	- ams,tuning-capacitor-pf: Calibration tuning capacitor stepping
-	  value 0 - 120pF. This will require using the calibration data from
-	  the manufacturer.
-	- ams,nflwdth: Set the noise and watchdog threshold register on
-	  startup. This will need to set according to the noise from the
-	  MCU board, and possibly the local environment. Refer to the
-	  datasheet for the threshold settings.
-
-Example:
-
-as3935@0 {
-	compatible = "ams,as3935";
-	reg = <0>;
-	spi-max-frequency = <400000>;
-	spi-cpha;
-	interrupt-parent = <&gpio1>;
-	interrupts = <16 1>;
-	ams,tuning-capacitor-pf = <80>;
-	ams,nflwdth = <0x44>;
-};
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
index 5739074d3592..ccfb163f3d34 100644
--- a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9310.yaml
@@ -40,6 +40,63 @@ properties:
   "#io-channel-cells":
     const: 1
 
+  semtech,cs0-ground:
+    description: Indicates the CS0 sensor is connected to ground.
+    type: boolean
+
+  semtech,combined-sensors:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: |
+      List of which sensors are combined and represented by CS3.
+      Possible values are -
+      3        - CS3 (internal)
+      0 1      - CS0 + CS1
+      1 2      - CS1 + CS2 (default)
+      0 1 2 3  - CS0 + CS1 + CS2 + CS3
+    items:
+      enum: [ 0, 1, 2, 3 ]
+    minItems: 1
+    maxItems: 4
+
+  semtech,resolution:
+    description:
+      Capacitance measure resolution. Refer to datasheet for more details.
+    enum:
+      - coarsest
+      - very-coarse
+      - coarse
+      - medium-coarse
+      - medium
+      - fine
+      - very-fine
+      - finest
+
+  semtech,startup-sensor:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 1, 2, 3]
+    default: 0
+    description:
+      Sensor used for start-up proximity detection. The combined
+      sensor is represented by the value 3. This is used for initial
+      compensation.
+
+  semtech,proxraw-strength:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 2, 4, 8]
+    default: 2
+    description:
+      PROXRAW filter strength. A value of 0 represents off, and other values
+      represent 1-1/N.
+
+  semtech,avg-pos-strength:
+    $ref: /schemas/types.yaml#definitions/uint32
+    enum: [0, 16, 64, 128, 256, 512, 1024, 4294967295]
+    default: 16
+    description:
+      Average positive filter strength. A value of 0 represents off and
+      UINT_MAX (4294967295) represents infinite. Other values
+      represent 1-1/N.
+
 required:
   - compatible
   - reg
@@ -61,5 +118,11 @@ examples:
         vdd-supply = <&pp3300_a>;
         svdd-supply = <&pp1800_prox>;
         #io-channel-cells = <1>;
+        semtech,cs0-ground;
+        semtech,combined-sensors = <1 2 3>;
+        semtech,resolution = "fine";
+        semtech,startup-sensor = <1>;
+        semtech,proxraw-strength = <2>;
+        semtech,avg-pos-strength = <64>;
       };
     };
diff --git a/Documentation/devicetree/bindings/iio/proximity/semtech,sx9500.yaml b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9500.yaml
new file mode 100644
index 000000000000..66dd01506859
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/semtech,sx9500.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/semtech,sx9500.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Semtech's SX9500 capacitive proximity button device
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+properties:
+  compatible:
+    const: semtech,sx9500
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    description:
+      GPIO connected to the active low reset pin.
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@28 {
+            compatible = "semtech,sx9500";
+            reg = <0x28>;
+            interrupt-parent = <&gpio2>;
+            interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+            reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
new file mode 100644
index 000000000000..656460d9d8c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/st,vl53l0x.yaml
@@ -0,0 +1,42 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/proximity/st,vl53l0x.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ST VL53L0X ToF ranging sensor
+
+maintainers:
+  - Song Qiang <songqiang1304521@gmail.com>
+
+properties:
+  compatible:
+    const: st,vl53l0x
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        proximity@29 {
+            compatible = "st,vl53l0x";
+            reg = <0x29>;
+            interrupt-parent = <&gpio>;
+            interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
deleted file mode 100644
index c54455db3bec..000000000000
--- a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
+++ /dev/null
@@ -1,23 +0,0 @@
-Semtech's SX9500 capacitive proximity button device driver
-
-Required properties:
-	- compatible: must be "semtech,sx9500"
-	- reg: i2c address where to find the device
-	- interrupts : the sole interrupt generated by the device
-
-	Refer to interrupt-controller/interrupts.txt for generic
-	interrupt client node bindings.
-
-Optional properties:
-	- reset-gpios: Reference to the GPIO connected to the device's active
-	  low reset pin.
-
-Example:
-
-sx9500@28 {
-	compatible = "semtech,sx9500";
-	reg = <0x28>;
-	interrupt-parent = <&gpio2>;
-	interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
-	reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
-};
diff --git a/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt b/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
deleted file mode 100644
index dfe00eb961cd..000000000000
--- a/Documentation/devicetree/bindings/iio/proximity/vl53l0x.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-ST VL53L0X ToF ranging sensor
-
-Required properties:
-	- compatible: must be "st,vl53l0x"
-	- reg: i2c address where to find the device
-
-Optional properties:
-	- interrupts:	Interrupt for notifying that new measurement is ready.
-			If no interrupt is specified, polling is used.
-
-Example:
-
-vl53l0x@29 {
-	compatible = "st,vl53l0x";
-	reg = <0x29>;
-	interrupt-parent = <&gpio>;
-	interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
-};