Merge tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:

 - Convert various DT (non-binding) doc files to ReST

 - Various improvements to device link code

 - Fix __of_attach_node_sysfs refcounting bug

 - Add support for 'memory-region-names' with reserved-memory binding

 - Vendor prefixes for Protonic Holland, BeagleBoard.org, Alps, Check
   Point, Würth Elektronik, U-Boot, Vaisala, Baikal Electronics,
   Shanghai Awinic Technology Co., MikroTik, Silex Insight

 - A bunch more binding conversions to DT schema. Only 3K to go.

 - Add a minimum version check for schema tools

 - Treewide dropping of 'allOf' usage with schema references. Not needed
   in new json-schema spec.

 - Some formatting clean-ups of schemas

* tag 'devicetree-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (194 commits)
  dt-bindings: clock: Add documentation for X1830 bindings.
  dt-bindings: mailbox: Convert imx mu to json-schema
  dt-bindings: power: Convert imx gpcv2 to json-schema
  dt-bindings: power: Convert imx gpc to json-schema
  dt-bindings: Merge gpio-usb-b-connector with usb-connector
  dt-bindings: timer: renesas: cmt: Convert to json-schema
  dt-bindings: clock: Convert i.MX8QXP LPCG to json-schema
  dt-bindings: timer: Convert i.MX GPT to json-schema
  dt-bindings: thermal: rcar-thermal: Add device tree support for r8a7742
  dt-bindings: serial: Add binding for UART pin swap
  dt-bindings: geni-se: Add interconnect binding for GENI QUP
  dt-bindings: geni-se: Convert QUP geni-se bindings to YAML
  dt-bindings: vendor-prefixes: Add Silex Insight vendor prefix
  dt-bindings: input: touchscreen: edt-ft5x06: change reg property
  dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver
  dt-bindings: timer: renesas: mtu2: Convert to json-schema
  of/fdt: Remove redundant kbasename function call
  dt-bindings: clock: Convert i.MX1 clock to json-schema
  dt-bindings: clock: Convert i.MX21 clock to json-schema
  dt-bindings: clock: Convert i.MX25 clock to json-schema
  ...

1 files changed, 0 insertions, 138 deletions

diff --git a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt b/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
deleted file mode 100644
index 91f704951845..000000000000
--- a/Documentation/devicetree/bindings/timer/ingenic,tcu.txt
+++ /dev/null
@@ -1,138 +0,0 @@
-Ingenic JZ47xx SoCs Timer/Counter Unit devicetree bindings
-==========================================================
-
-For a description of the TCU hardware and drivers, have a look at
-Documentation/mips/ingenic-tcu.rst.
-
-Required properties:
-
-- compatible: Must be one of:
-  * ingenic,jz4740-tcu
-  * ingenic,jz4725b-tcu
-  * ingenic,jz4770-tcu
-  * ingenic,x1000-tcu
-  followed by "simple-mfd".
-- reg: Should be the offset/length value corresponding to the TCU registers
-- clocks: List of phandle & clock specifiers for clocks external to the TCU.
-  The "pclk", "rtc" and "ext" clocks should be provided. The "tcu" clock
-  should be provided if the SoC has it.
-- clock-names: List of name strings for the external clocks.
-- #clock-cells: Should be <1>;
-  Clock consumers specify this argument to identify a clock. The valid values
-  may be found in <dt-bindings/clock/ingenic,tcu.h>.
-- interrupt-controller : Identifies the node as an interrupt controller
-- #interrupt-cells : Specifies the number of cells needed to encode an
-  interrupt source. The value should be 1.
-- interrupts : Specifies the interrupt the controller is connected to.
-
-Optional properties:
-
-- ingenic,pwm-channels-mask: Bitmask of TCU channels reserved for PWM use.
-  Default value is 0xfc.
-
-
-Children nodes
-==========================================================
-
-
-PWM node:
----------
-
-Required properties:
-
-- compatible: Must be one of:
-  * ingenic,jz4740-pwm
-  * ingenic,jz4725b-pwm
-- #pwm-cells: Should be 3. See ../pwm/pwm.yaml for a description of the cell
-  format.
-- clocks: List of phandle & clock specifiers for the TCU clocks.
-- clock-names: List of name strings for the TCU clocks.
-
-
-Watchdog node:
---------------
-
-Required properties:
-
-- compatible: Must be "ingenic,jz4740-watchdog"
-- clocks: phandle to the WDT clock
-- clock-names: should be "wdt"
-
-
-OS Timer node:
----------
-
-Required properties:
-
-- compatible: Must be one of:
-  * ingenic,jz4725b-ost
-  * ingenic,jz4770-ost
-- clocks: phandle to the OST clock
-- clock-names: should be "ost"
-- interrupts : Specifies the interrupt the OST is connected to.
-
-
-Example
-==========================================================
-
-#include <dt-bindings/clock/jz4770-cgu.h>
-#include <dt-bindings/clock/ingenic,tcu.h>
-
-/ {
-	tcu: timer@10002000 {
-		compatible = "ingenic,jz4770-tcu", "simple-mfd";
-		reg = <0x10002000 0x1000>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x10002000 0x1000>;
-
-		#clock-cells = <1>;
-
-		clocks = <&cgu JZ4770_CLK_RTC
-			  &cgu JZ4770_CLK_EXT
-			  &cgu JZ4770_CLK_PCLK>;
-		clock-names = "rtc", "ext", "pclk";
-
-		interrupt-controller;
-		#interrupt-cells = <1>;
-
-		interrupt-parent = <&intc>;
-		interrupts = <27 26 25>;
-
-		watchdog: watchdog@0 {
-			compatible = "ingenic,jz4740-watchdog";
-			reg = <0x0 0xc>;
-
-			clocks = <&tcu TCU_CLK_WDT>;
-			clock-names = "wdt";
-		};
-
-		pwm: pwm@40 {
-			compatible = "ingenic,jz4740-pwm";
-			reg = <0x40 0x80>;
-
-			#pwm-cells = <3>;
-
-			clocks = <&tcu TCU_CLK_TIMER0
-				  &tcu TCU_CLK_TIMER1
-				  &tcu TCU_CLK_TIMER2
-				  &tcu TCU_CLK_TIMER3
-				  &tcu TCU_CLK_TIMER4
-				  &tcu TCU_CLK_TIMER5
-				  &tcu TCU_CLK_TIMER6
-				  &tcu TCU_CLK_TIMER7>;
-			clock-names = "timer0", "timer1", "timer2", "timer3",
-				      "timer4", "timer5", "timer6", "timer7";
-		};
-
-		ost: timer@e0 {
-			compatible = "ingenic,jz4770-ost";
-			reg = <0xe0 0x20>;
-
-			clocks = <&tcu TCU_CLK_OST>;
-			clock-names = "ost";
-
-			interrupts = <15>;
-		};
-	};
-};