Merge tag 'drm-misc-next-2023-01-03' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.3:

UAPI Changes:

 * connector: Support analog-TV mode property
 * media: Add MEDIA_BUS_FMT_RGB565_1X24_CPADHI,
   MEDIA_BUS_FMT_RGB666_1X18 and MEDIA_BUS_FMT_RGB666_1X24_CPADHI

Cross-subsystem Changes:

 * dma-buf: Documentation fixes
 * i2c: Introduce i2c_client_get_device_id() helper

Core Changes:

 * Improve support for analog TV output
 * bridge: Remove unused drm_bridge_chain functions
 * debugfs: Add per-device helpers and convert various DRM drivers
 * dp-mst: Various fixes
 * fbdev emulation: Always pick 32 bpp as default
 * KUnit: Add tests for managed helpers; Various cleanups
 * panel-orientation: Add quirks for Lenovo Yoga Tab 3 X90F and DynaBook K50
 * TTM: Open-code ttm_bo_wait() and remove the helper

Driver Changes:

 * Fix preferred depth and bpp values throughout DRM drivers
 * Remove #CONFIG_PM guards throughout DRM drivers
 * ast: Various fixes
 * bridge: Implement i2c's probe_new in various drivers; Fixes; ite-it6505:
   Locking fixes, Cache EDID data; ite-it66121: Support IT6610 chip,
   Cleanups; lontium-tl9611: Fix HDMI on DragonBoard 845c; parade-ps8640:
   Use atomic bridge functions
 * gud: Convert to DRM shadow-plane helpers; Perform flushing synchronously
   during atomic update
 * ili9486: Support 16-bit pixel data
 * imx: Split off IPUv3 driver; Various fixes
 * mipi-dbi: Convert to DRM shadow-plane helpers plus rsp driver changes;i
   Support separate I/O-voltage supply
 * mxsfb: Depend on ARCH_MXS or ARCH_MXC
 * omapdrm: Various fixes
 * panel: Use ktime_get_boottime() to measure power-down delay in various
   drivers; Fix auto-suspend delay in various drivers; orisetech-ota5601a:
   Add support
 * sprd: Cleanups
 * sun4i: Convert to new TV-mode property
 * tidss: Various fixes
 * v3d: Various fixes
 * vc4: Convert to new TV-mode property; Support Kunit tests; Cleanups;
   dpi: Support RGB565 and RGB666 formats; dsi: Convert DSI driver to
   bridge
 * virtio: Improve tracing
 * vkms: Support small cursors in IGT tests; Various fixes

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/Y7QIwlfElAYWxRcR@linux-uq9g

10 files changed, 282 insertions, 15 deletions

diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
index b697c42399ea..c9a882ee6d98 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
@@ -52,9 +52,49 @@ properties:
     maxItems: 1
     description: extcon specifier for the Power Delivery
 
-  port:
-    $ref: /schemas/graph.yaml#/properties/port
-    description: A port node pointing to DPI host port node
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: A port node pointing to DPI host port node
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              link-frequencies:
+                minItems: 1
+                maxItems: 1
+                description: Allowed max link frequencies in Hz
+
+      port@1:
+        $ref: /schemas/graph.yaml#/$defs/port-base
+        unevaluatedProperties: false
+        description: Video port for DP output
+
+        properties:
+          endpoint:
+            $ref: /schemas/graph.yaml#/$defs/endpoint-base
+            unevaluatedProperties: false
+
+            properties:
+              data-lanes:
+                minItems: 1
+                uniqueItems: true
+                items:
+                  - enum: [ 0, 1 ]
+                  - const: 1
+                  - const: 2
+                  - const: 3
+
+    required:
+      - port@0
+      - port@1
 
 required:
   - compatible
@@ -63,6 +103,7 @@ required:
   - interrupts
   - reset-gpios
   - extcon
+  - ports
 
 additionalProperties: false
 
@@ -85,9 +126,24 @@ examples:
             reset-gpios = <&pio 179 1>;
             extcon = <&usbc_extcon>;
 
-            port {
-                it6505_in: endpoint {
-                    remote-endpoint = <&dpi_out>;
+            ports {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                port@0 {
+                    reg = <0>;
+                    it6505_in: endpoint {
+                        remote-endpoint = <&dpi_out>;
+                        link-frequencies = /bits/ 64 <150000000>;
+                    };
+                };
+
+                port@1 {
+                    reg = <1>;
+                    it6505_out: endpoint {
+                        remote-endpoint = <&dp_in>;
+                        data-lanes = <0 1>;
+                    };
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
index d3454da1247a..a7eb2603691f 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
@@ -17,7 +17,9 @@ description: |
 
 properties:
   compatible:
-    const: ite,it66121
+    enum:
+      - ite,it66121
+      - ite,it6610
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
new file mode 100644
index 000000000000..d54e96b2a9e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/focaltech,gpt3.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/focaltech,gpt3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Focaltech GPT3 3.0" (640x480 pixels) IPS LCD panel
+
+maintainers:
+  - Christophe Branchereau <cbranchereau@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    const: focaltech,gpt3
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - power-supply
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "focaltech,gpt3";
+            reg = <0>;
+
+            spi-max-frequency = <3125000>;
+
+            reset-gpios = <&gpe 2 GPIO_ACTIVE_LOW>;
+
+            backlight = <&backlight>;
+            power-supply = <&vcc>;
+
+            port {
+                panel_input: endpoint {
+                    remote-endpoint = <&panel_output>;
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
index c2df8d28aaf5..9b701df5e9d2 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-mipi-dbi-spi.yaml
@@ -22,8 +22,9 @@ description: |
   The standard defines the following interface signals for type C:
   - Power:
     - Vdd: Power supply for display module
+      Called power-supply in this binding.
     - Vddi: Logic level supply for interface signals
-    Combined into one in this binding called: power-supply
+      Called io-supply in this binding.
   - Interface:
     - CSx: Chip select
     - SCL: Serial clock
@@ -80,6 +81,11 @@ properties:
       Controller data/command selection (D/CX) in 4-line SPI mode.
       If not set, the controller is in 3-line SPI mode.
 
+  io-supply:
+    description: |
+      Logic level supply for interface signals (Vddi).
+      No need to set if this is the same as power-supply.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/fb/modedb.rst b/Documentation/fb/modedb.rst
index e53375033146..bb2889c6ea27 100644
--- a/Documentation/fb/modedb.rst
+++ b/Documentation/fb/modedb.rst
@@ -29,7 +29,10 @@ Things between square brackets are optional.
 Valid names are::
 
   - NSTC: 480i output, with the CCIR System-M TV mode and NTSC color encoding
+  - NTSC-J: 480i output, with the CCIR System-M TV mode, the NTSC color
+    encoding, and a black level equal to the blanking level.
   - PAL: 576i output, with the CCIR System-B TV mode and PAL color encoding
+  - PAL-M: 480i output, with the CCIR System-M TV mode and PAL color encoding
 
 If 'M' is specified in the mode_option argument (after <yres> and before
 <bpp> and <refresh>, if specified) the timings will be calculated using
@@ -70,6 +73,8 @@ Valid options are::
   - reflect_y (boolean): Perform an axial symmetry on the Y axis
   - rotate (integer): Rotate the initial framebuffer by x
     degrees. Valid values are 0, 90, 180 and 270.
+  - tv_mode: Analog TV mode. One of "NTSC", "NTSC-443", "NTSC-J", "PAL",
+    "PAL-M", "PAL-N", or "SECAM".
   - panel_orientation, one of "normal", "upside_down", "left_side_up", or
     "right_side_up". For KMS drivers only, this sets the "panel orientation"
     property on the kms connector as hint for kms users.
diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
index a4860ffd6e86..b8ab05e42dbb 100644
--- a/Documentation/gpu/drm-kms-helpers.rst
+++ b/Documentation/gpu/drm-kms-helpers.rst
@@ -188,6 +188,13 @@ Bridge Helper Reference
 .. kernel-doc:: drivers/gpu/drm/drm_bridge.c
    :export:
 
+MIPI-DSI bridge operation
+-------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_bridge.c
+   :doc: dsi bridge operations
+
+
 Bridge Connector Helper Reference
 ---------------------------------
 
diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst
index b4377a545425..c92d425cb2dd 100644
--- a/Documentation/gpu/drm-kms.rst
+++ b/Documentation/gpu/drm-kms.rst
@@ -520,6 +520,12 @@ HDMI Specific Connector Properties
 .. kernel-doc:: drivers/gpu/drm/drm_connector.c
    :doc: HDMI connector properties
 
+Analog TV Specific Connector Properties
+---------------------------------------
+
+.. kernel-doc:: drivers/gpu/drm/drm_connector.c
+   :doc: Analog TV Connector Properties
+
 Standard CRTC Properties
 ------------------------
 
diff --git a/Documentation/gpu/todo.rst b/Documentation/gpu/todo.rst
index b2c6aaf1edf2..1f8a5ebe188e 100644
--- a/Documentation/gpu/todo.rst
+++ b/Documentation/gpu/todo.rst
@@ -508,17 +508,18 @@ Clean up the debugfs support
 
 There's a bunch of issues with it:
 
-- The drm_info_list ->show() function doesn't even bother to cast to the drm
-  structure for you. This is lazy.
+- Convert drivers to support the drm_debugfs_add_files() function instead of
+  the drm_debugfs_create_files() function.
+
+- Improve late-register debugfs by rolling out the same debugfs pre-register
+  infrastructure for connector and crtc too. That way, the drivers won't need to
+  split their setup code into init and register anymore.
 
 - We probably want to have some support for debugfs files on crtc/connectors and
   maybe other kms objects directly in core. There's even drm_print support in
   the funcs for these objects to dump kms state, so it's all there. And then the
   ->show() functions should obviously give you a pointer to the right object.
 
-- The drm_info_list stuff is centered on drm_minor instead of drm_device. For
-  anything we want to print drm_device (or maybe drm_file) is the right thing.
-
 - The drm_driver->debugfs_init hooks we have is just an artifact of the old
   midlayered load sequence. DRM debugfs should work more like sysfs, where you
   can create properties/files for an object anytime you want, and the core
@@ -527,8 +528,6 @@ There's a bunch of issues with it:
   this (together with the drm_minor->drm_device move) would allow us to remove
   debugfs_init.
 
-Previous RFC that hasn't landed yet: https://lore.kernel.org/dri-devel/20200513114130.28641-2-wambui.karugax@gmail.com/
-
 Contact: Daniel Vetter
 
 Level: Intermediate
diff --git a/Documentation/gpu/vc4.rst b/Documentation/gpu/vc4.rst
index 5df1d98b9544..5e5e92e40919 100644
--- a/Documentation/gpu/vc4.rst
+++ b/Documentation/gpu/vc4.rst
@@ -54,6 +54,25 @@ VEC (Composite TV out) encoder
 .. kernel-doc:: drivers/gpu/drm/vc4/vc4_vec.c
    :doc: VC4 SDTV module
 
+KUnit Tests
+===========
+
+The VC4 Driver uses KUnit to perform driver-specific unit and
+integration tests.
+
+These tests are using a mock driver and can be ran using the
+command below, on either arm or arm64 architectures,
+
+.. code-block:: bash
+
+	$ ./tools/testing/kunit/kunit.py run \
+		--kunitconfig=drivers/gpu/drm/vc4/tests/.kunitconfig \
+		--cross_compile aarch64-linux-gnu- --arch arm64
+
+Parts of the driver that are currently covered by tests are:
+ * The HVS to PixelValve dynamic FIFO assignment, for the BCM2835-7
+   and BCM2711.
+
 Memory Management and 3D Command Submission
 ===========================================
 
diff --git a/Documentation/userspace-api/media/v4l/subdev-formats.rst b/Documentation/userspace-api/media/v4l/subdev-formats.rst
index 16ef3b41932e..a3a35eeed708 100644
--- a/Documentation/userspace-api/media/v4l/subdev-formats.rst
+++ b/Documentation/userspace-api/media/v4l/subdev-formats.rst
@@ -949,6 +949,43 @@ The following tables list existing packed RGB formats.
       - b\ :sub:`2`
       - b\ :sub:`1`
       - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-BGR666-1X18:
+
+      - MEDIA_BUS_FMT_BGR666_1X18
+      - 0x1023
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
     * .. _MEDIA-BUS-FMT-RBG888-1X24:
 
       - MEDIA_BUS_FMT_RBG888_1X24
@@ -1023,6 +1060,80 @@ The following tables list existing packed RGB formats.
       - b\ :sub:`2`
       - b\ :sub:`1`
       - b\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-BGR666-1X24_CPADHI:
+
+      - MEDIA_BUS_FMT_BGR666_1X24_CPADHI
+      - 0x1024
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - 0
+      - 0
+      - b\ :sub:`5`
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
+      - 0
+      - 0
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - 0
+      - 0
+      - r\ :sub:`5`
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+    * .. _MEDIA-BUS-FMT-RGB565-1X24_CPADHI:
+
+      - MEDIA_BUS_FMT_RGB565_1X24_CPADHI
+      - 0x1022
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      -
+      - 0
+      - 0
+      - 0
+      - r\ :sub:`4`
+      - r\ :sub:`3`
+      - r\ :sub:`2`
+      - r\ :sub:`1`
+      - r\ :sub:`0`
+      - 0
+      - 0
+      - g\ :sub:`5`
+      - g\ :sub:`4`
+      - g\ :sub:`3`
+      - g\ :sub:`2`
+      - g\ :sub:`1`
+      - g\ :sub:`0`
+      - 0
+      - 0
+      - 0
+      - b\ :sub:`4`
+      - b\ :sub:`3`
+      - b\ :sub:`2`
+      - b\ :sub:`1`
+      - b\ :sub:`0`
     * .. _MEDIA-BUS-FMT-BGR888-1X24:
 
       - MEDIA_BUS_FMT_BGR888_1X24