ARM: dts: at91: add smartkiz support and a common kizboxmini dtsi file

Split the existing Kizbox Mini boards into three board configuration,
the base board, the mother board and the RailDIN board.
Add a new dts file for the SmartKiz board support.

Signed-off-by: Kévin RAYMOND <k.raymond@overkiz.com>
Signed-off-by: Mickael GARDET <m.gardet@overkiz.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Link: https://lore.kernel.org/r/20191220103835.160154-2-kamel.bouhara@bootlin.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

1 files changed, 0 insertions, 171 deletions

diff --git a/arch/arm/boot/dts/at91-kizboxmini.dts b/arch/arm/boot/dts/at91-kizboxmini.dts
deleted file mode 100644
index cb22f5fb055f..000000000000
--- a/arch/arm/boot/dts/at91-kizboxmini.dts
+++ /dev/null
@@ -1,171 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * at91-kizboxmini.dts - Device Tree file for Overkiz Kizbox mini board
- *
- * Copyright (C) 2014 Gaël PORTAY <g.portay@overkiz.com>
- */
-/dts-v1/;
-#include "at91sam9g25.dtsi"
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Overkiz Kizbox mini";
-	compatible = "overkiz,kizboxmini", "atmel,at91sam9g25", "atmel,at91sam9x5", "atmel,at91sam9";
-
-	chosen {
-		bootargs = "ubi.mtd=ubi";
-		stdout-path = &dbgu;
-	};
-
-	memory {
-		reg = <0x20000000 0x8000000>;
-	};
-
-	clocks {
-		slow_xtal {
-			clock-frequency = <32768>;
-		};
-
-		main_xtal {
-			clock-frequency = <12000000>;
-		};
-	};
-
-	ahb {
-		nand0: nand@40000000 {
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			atmel,has-pmecc;
-			atmel,pmecc-cap = <4>;
-			atmel,pmecc-sector-size = <512>;
-			nand-on-flash-bbt;
-			status = "okay";
-		};
-	};
-
-	gpio_keys {
-		compatible = "gpio-keys";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		prog {
-			label = "PB_PROG";
-			gpios = <&pioC 17 GPIO_ACTIVE_LOW>;
-			linux,code = <0x102>;
-			wakeup-source;
-		};
-
-		reset {
-			label = "PB_RST";
-			gpios = <&pioC 16 GPIO_ACTIVE_LOW>;
-			linux,code = <0x100>;
-			wakeup-source;
-		};
-	};
-
-	pwm_leds {
-		compatible = "pwm-leds";
-
-		green {
-			label = "pwm:green:user";
-			pwms = <&pwm0 0 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-
-		red {
-			label = "pwm:red:user";
-			pwms = <&pwm0 1 10000000 0>;
-			max-brightness = <255>;
-			linux,default-trigger = "default-on";
-		};
-	};
-};
-
-&dbgu {
-	status = "okay";
-};
-
-&ebi {
-	pinctrl-0 = <&pinctrl_ebi_addr_nand
-		     &pinctrl_ebi_data_0_7>;
-	pinctrl-names = "default";
-	status = "okay";
-
-	nand-controller {
-		pinctrl-0 = <&pinctrl_nand_oe_we
-			     &pinctrl_nand_cs
-			     &pinctrl_nand_rb>;
-		pinctrl-names = "default";
-		status = "okay";
-
-		nand@3 {
-			reg = <0x3 0x0 0x800000>;
-			rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
-			cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
-			nand-bus-width = <8>;
-			nand-ecc-mode = "hw";
-			nand-ecc-strength = <4>;
-			nand-ecc-step-size = <512>;
-			nand-on-flash-bbt;
-			label = "atmel_nand";
-
-			partitions {
-				compatible = "fixed-partitions";
-				#address-cells = <1>;
-				#size-cells = <1>;
-
-				bootstrap@0 {
-					label = "bootstrap";
-					reg = <0x0 0x20000>;
-				};
-
-				ubi@20000 {
-					label = "ubi";
-					reg = <0x20000 0x7fe0000>;
-				};
-			};
-		};
-	};
-};
-
-&macb0 {
-	phy-mode = "rmii";
-	status = "okay";
-};
-
-&pwm0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_pwm0_pwm0_1
-		     &pinctrl_pwm0_pwm1_1>;
-	status = "okay";
-};
-
-&tcb0 {
-	timer@0 {
-		compatible = "atmel,tcb-timer";
-		reg = <0>;
-	};
-
-	timer@1 {
-		compatible = "atmel,tcb-timer";
-		reg = <1>;
-	};
-};
-
-&usart0 {
-	status = "okay";
-};
-
-&usb0 {
-	num-ports = <1>;
-	status = "okay";
-};
-
-&usb1 {
-	status = "okay";
-};
-
-&watchdog {
-	status = "okay";
-};