ARM: tegra: Work safely with 256 MB Colibri-T20 modules

Colibri-T20 can come in 256 MB RAM (with 512 MB NAND) or 512 MB RAM
(with 1024 MB NAND) flavors.  Both of them will use the same DTSI
expecting the bootloader to do the fixup of /memory node.  However in
case it does not happen, let's stay on safe side by limiting the memory
to 256 MB for both versions of Colibri-T20.

Rename to remove the unnecessary memory size from the device tree file
name.  While at it, also follow the typical Toradex SoC, module, carrier
board hierarchy.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Tested-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>

1 files changed, 0 insertions, 106 deletions

diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts
deleted file mode 100644
index 40126388946d..000000000000
--- a/arch/arm/boot/dts/tegra20-iris-512.dts
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/dts-v1/;
-
-#include "tegra20-colibri-512.dtsi"
-
-/ {
-	model = "Toradex Colibri T20 512MB on Iris";
-	compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
-
-	aliases {
-		serial0 = &uarta;
-		serial1 = &uartd;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	host1x@50000000 {
-		hdmi@54280000 {
-			status = "okay";
-		};
-	};
-
-	pinmux@70000014 {
-		state_default: pinmux {
-			hdint {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			i2cddc {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			sdio4 {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			uarta {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			uartd {
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-		};
-	};
-
-	serial@70006000 {
-		status = "okay";
-	};
-
-	serial@70006300 {
-		status = "okay";
-	};
-
-	i2c_ddc: i2c@7000c400 {
-		status = "okay";
-	};
-
-	usb@c5000000 {
-		status = "okay";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-	};
-
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-	};
-
-	sdhci@c8000600 {
-		status = "okay";
-		bus-width = <4>;
-		vmmc-supply = <&vcc_sd_reg>;
-		vqmmc-supply = <&vcc_sd_reg>;
-	};
-
-	regulators {
-		regulator@0 {
-			compatible = "regulator-fixed";
-			reg = <0>;
-			regulator-name = "usb_host_vbus";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			regulator-always-on;
-			gpio = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_HIGH>;
-		};
-
-		vcc_sd_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			reg = <1>;
-			regulator-name = "vcc_sd";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-boot-on;
-			regulator-always-on;
-		};
-	};
-};