Merge tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM devicetree updates from Arnd Bergmann:
 "There are six new SoCs added this time.

  Apple M1 and Nuvoton WPCM450 have separate branches because they are
  new SoC families that require changes outside of device tree files.
  The other four are variations of already supported chips and get
  merged through this branch:

   - STMicroelectronics STM32H750 is one of many variants of STM32
     microcontrollers based on the Cortex-M7 core.

     This is particularly notable since we rarely add support for new
     MMU-less chips these days. In this case, the board that gets added
     along with the platform is not a SoC reference platform but the
     "Art Pi" (https://art-pi.gitee.io/website/) machine that was
     originally design for the RT-Thread RTOS.

   - NXP i.MX8QuadMax is a variant of the growing i.MX8
     embedded/industrial SoC family, using two Cortex-A72 and four
     Cortex-A53 cores.

     It gets added along with its reference board, the "NXP i.MX8QuadMax
     Multisensory Enablement Kit".

   - Qualcomm SC7280 is a Laptop SoC following the SC7180 (Snapdragon
     7c) that is used in some Chromebooks and Windows laptops.

     Only a reference board is added for the moment.

   - TI AM64x Sita4ra is a new version of the K3 SoC family for
     industrial control, motor control, remote IO, IoT gateway etc.,
     similar to the older AM65x family.

     Two reference machines are added alongside.

  Among the newly added machines, there is a very clear skew towards
  64-bit machines now, with 12 32-bit machines compared to 23 64-bit
  machines. The full list sorted by SoC is:

   - ASpeed AST2500 BMC: ASRock E3C246D4I Xeon server board
   - Allwinner A10: Topwise A721 Tablet
   - Amlogic GXL: MeCool KII TV box
   - Amlogic GXM: Mecool KIII, Minix Neo U9-H TV boxes
   - Broadcom BCM4908: TP-Link Archer C2300 V1 router
   - MStar SSD202D: M5Stack UnitV2 camera
   - Marvell Armada 38x: ATL-x530 ethernet switch
   - Mediatek MT8183 Chromebooks: Lenovo 10e, Acer Spin 311, Asus Flip
     CM3, Asus Detachable CM3
   - Mediatek MT8516/MT8183: OLogic Pumpkin Board
   - NXP i.MX7: reMarkable Tablet
   - NXP i.MX8M: Kontron pitx-imx8m, Engicam i.Core MX8M Mini
   - Nuvoton NPCM730: Quanta GBS BMC
   - Qualcomm X55: Telit FN980 TLB SoM, Thundercomm TurboX T55 SoM
   - Qualcomm MSM8998: OnePlus 5/5T phones
   - Qualcomm SM8350: Snapdragon 888 Mobile Hardware Development Kit
   - Rockchip RK3399: NanoPi R4S board
   - STM32MP1: Engicam MicroGEA STM32MP1 MicroDev 2.0 and SOM, EDIMM2.2
     Starter Kit, Carrier, SOM
   - TI AM65: Siemens SIMATIC IOT2050 gateway

  There is notable work going into extending already supported machines
  and SoCs:

   - ASpeed AST2500
   - Allwinner A23, A83t, A31, A64, H6
   - Amlogic G12B
   - Broadcom BCM4908
   - Marvell Armada 7K/8K/CN91xx
   - Mediatek MT6589, MT7622, MT8173, MT8183, MT8195
   - NXP i.MX8Q, i.MX8MM, i.MX8MP
   - Qualcomm MSM8916, SC7180, SDM845, SDX55, SM8350
   - Renesas R-Car M3, V3U
   - Rockchip RK3328, RK3399
   - STEricsson U8500
   - STMicroelectronics STM32MP141
   - Samsung Exynos 4412
   - TI K3-AM65, K3-J7200
   - TI OMAP3

  Among the treewide cleanups and bug fixes, two parts stand out:

   - There are a number of cleanups for issues pointed out by 'make
     dtbs_check' this time, and I expect more to come in the future as
     we increasingly check for regressions.

   - After a change to the MMC subsystem that can lead to unpredictable
     device numbers, several platforms add 'aliases' properties for
     these to give each MMC controller a fixed number"

* tag 'arm-dt-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (516 commits)
  dt-bindings: mali-bifrost: add dma-coherent
  arm64: dts: amlogic: misc DT schema fixups
  arm64: dts: qcom: sc7180: Update iommu property for simultaneous playback
  arm64: dts: qcom: sc7180: pompom: Add "dmic_clk_en" + sound model
  arm64: dts: qcom: sc7180: coachz: Add "dmic_clk_en"
  ARM: dts: mstar: Add a dts for M5Stack UnitV2
  dt-bindings: arm: mstar: Add compatible for M5Stack UnitV2
  dt-bindings: vendor-prefixes: Add vendor prefix for M5Stack
  arm64: dts: mt8183: fix dtbs_check warning
  arm64: dts: mt8183-pumpkin: fix dtbs_check warning
  ARM: dts: aspeed: tiogapass: add hotplug controller
  ARM: dts: aspeed: amd-ethanolx: Enable all used I2C busses
  ARM: dts: aspeed: Rainier: Update to pass 2 hardware
  ARM: dts: aspeed: Rainier 1S4U: Fix fan nodes
  ARM: dts: aspeed: Rainier: Fix humidity sensor bus address
  ARM: dts: aspeed: Rainier: Fix PCA9552 on bus 8
  ARM: dts: qcom: sdx55: add IPA information
  ARM: dts: qcom: sdx55: Add basic devicetree support for Thundercomm T55
  dt-bindings: arm: qcom: Add binding for Thundercomm T55 kit
  ARM: dts: qcom: sdx55: Add basic devicetree support for Telit FN980 TLB
  ...

1 files changed, 30 insertions, 393 deletions

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index e46faac1fe71..1e6b4995091e 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -1,11 +1,12 @@
 // SPDX-License-Identifier: GPL-2.0+
 /*
  * Copyright (C) 2016 Freescale Semiconductor, Inc.
- * Copyright 2017-2018 NXP
+ * Copyright 2017-2020 NXP
  *	Dong Aisheng <aisheng.dong@nxp.com>
  */
 
 #include <dt-bindings/clock/imx8-clock.h>
+#include <dt-bindings/clock/imx8-lpcg.h>
 #include <dt-bindings/firmware/imx/rsrc.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/input/input.h>
@@ -29,10 +30,10 @@
 		gpio5 = &lsio_gpio5;
 		gpio6 = &lsio_gpio6;
 		gpio7 = &lsio_gpio7;
-		i2c0 = &adma_i2c0;
-		i2c1 = &adma_i2c1;
-		i2c2 = &adma_i2c2;
-		i2c3 = &adma_i2c3;
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		i2c2 = &i2c2;
+		i2c3 = &i2c3;
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		mmc2 = &usdhc3;
@@ -41,10 +42,10 @@
 		mu2 = &lsio_mu2;
 		mu3 = &lsio_mu3;
 		mu4 = &lsio_mu4;
-		serial0 = &adma_lpuart0;
-		serial1 = &adma_lpuart1;
-		serial2 = &adma_lpuart2;
-		serial3 = &adma_lpuart3;
+		serial0 = &lpuart0;
+		serial1 = &lpuart1;
+		serial2 = &lpuart2;
+		serial3 = &lpuart3;
 	};
 
 	cpus {
@@ -58,7 +59,7 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&A35_L2>;
-			clocks = <&clk IMX_A35_CLK>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
 			operating-points-v2 = <&a35_opp_table>;
 			#cooling-cells = <2>;
 		};
@@ -69,7 +70,7 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			next-level-cache = <&A35_L2>;
-			clocks = <&clk IMX_A35_CLK>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
 			operating-points-v2 = <&a35_opp_table>;
 			#cooling-cells = <2>;
 		};
@@ -80,7 +81,7 @@
 			reg = <0x0 0x2>;
 			enable-method = "psci";
 			next-level-cache = <&A35_L2>;
-			clocks = <&clk IMX_A35_CLK>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
 			operating-points-v2 = <&a35_opp_table>;
 			#cooling-cells = <2>;
 		};
@@ -91,7 +92,7 @@
 			reg = <0x0 0x3>;
 			enable-method = "psci";
 			next-level-cache = <&A35_L2>;
-			clocks = <&clk IMX_A35_CLK>;
+			clocks = <&clk IMX_SC_R_A35 IMX_SC_PM_CLK_CPU>;
 			operating-points-v2 = <&a35_opp_table>;
 			#cooling-cells = <2>;
 		};
@@ -158,9 +159,14 @@
 			  &lsio_mu1 1 0
 			  &lsio_mu1 3 3>;
 
+		pd: imx8qx-pd {
+			compatible = "fsl,imx8qxp-scu-pd", "fsl,scu-pd";
+			#power-domain-cells = <1>;
+		};
+
 		clk: clock-controller {
 			compatible = "fsl,imx8qxp-clk";
-			#clock-cells = <1>;
+			#clock-cells = <2>;
 			clocks = <&xtal32k &xtal24m>;
 			clock-names = "xtal_32KHz", "xtal_24Mhz";
 		};
@@ -175,11 +181,6 @@
 			#size-cells = <1>;
 		};
 
-		pd: imx8qx-pd {
-			compatible = "fsl,imx8qxp-scu-pd";
-			#power-domain-cells = <1>;
-		};
-
 		scu_key: scu-key {
 			compatible = "fsl,imx8qxp-sc-key", "fsl,imx-sc-key";
 			linux,keycodes = <KEY_POWER>;
@@ -223,380 +224,6 @@
 		clock-output-names = "xtal_24MHz";
 	};
 
-	adma_subsys: bus@59000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x59000000 0x0 0x59000000 0x2000000>;
-
-		adma_lpcg: clock-controller@59000000 {
-			compatible = "fsl,imx8qxp-lpcg-adma";
-			reg = <0x59000000 0x2000000>;
-			#clock-cells = <1>;
-		};
-
-		adma_dsp: dsp@596e8000 {
-			compatible = "fsl,imx8qxp-dsp";
-			reg = <0x596e8000 0x88000>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_DSP_IPG_CLK>,
-				<&adma_lpcg IMX_ADMA_LPCG_OCRAM_IPG_CLK>,
-				<&adma_lpcg IMX_ADMA_LPCG_DSP_CORE_CLK>;
-			clock-names = "ipg", "ocram", "core";
-			power-domains = <&pd IMX_SC_R_MU_13A>,
-				<&pd IMX_SC_R_MU_13B>,
-				<&pd IMX_SC_R_DSP>,
-				<&pd IMX_SC_R_DSP_RAM>;
-			mbox-names = "txdb0", "txdb1",
-				"rxdb0", "rxdb1";
-			mboxes = <&lsio_mu13 2 0>,
-				<&lsio_mu13 2 1>,
-				<&lsio_mu13 3 0>,
-				<&lsio_mu13 3 1>;
-			memory-region = <&dsp_reserved>;
-			status = "disabled";
-		};
-
-		adma_lpuart0: serial@5a060000 {
-			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
-			reg = <0x5a060000 0x1000>;
-			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART0_IPG_CLK>,
-				 <&adma_lpcg IMX_ADMA_LPCG_UART0_BAUD_CLK>;
-			clock-names = "ipg", "baud";
-			power-domains = <&pd IMX_SC_R_UART_0>;
-			status = "disabled";
-		};
-
-		adma_lpuart1: serial@5a070000 {
-			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
-			reg = <0x5a070000 0x1000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART1_IPG_CLK>,
-				 <&adma_lpcg IMX_ADMA_LPCG_UART1_BAUD_CLK>;
-			clock-names = "ipg", "baud";
-			power-domains = <&pd IMX_SC_R_UART_1>;
-			status = "disabled";
-		};
-
-		adma_lpuart2: serial@5a080000 {
-			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
-			reg = <0x5a080000 0x1000>;
-			interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART2_IPG_CLK>,
-				 <&adma_lpcg IMX_ADMA_LPCG_UART2_BAUD_CLK>;
-			clock-names = "ipg", "baud";
-			power-domains = <&pd IMX_SC_R_UART_2>;
-			status = "disabled";
-		};
-
-		adma_lpuart3: serial@5a090000 {
-			compatible = "fsl,imx8qxp-lpuart", "fsl,imx7ulp-lpuart";
-			reg = <0x5a090000 0x1000>;
-			interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_UART3_IPG_CLK>,
-				 <&adma_lpcg IMX_ADMA_LPCG_UART3_BAUD_CLK>;
-			clock-names = "ipg", "baud";
-			power-domains = <&pd IMX_SC_R_UART_3>;
-			status = "disabled";
-		};
-
-		adma_i2c0: i2c@5a800000 {
-			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
-			reg = <0x5a800000 0x4000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C0_CLK>;
-			clock-names = "per";
-			assigned-clocks = <&clk IMX_ADMA_I2C0_CLK>;
-			assigned-clock-rates = <24000000>;
-			power-domains = <&pd IMX_SC_R_I2C_0>;
-			status = "disabled";
-		};
-
-		adma_i2c1: i2c@5a810000 {
-			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
-			reg = <0x5a810000 0x4000>;
-			interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C1_CLK>;
-			clock-names = "per";
-			assigned-clocks = <&clk IMX_ADMA_I2C1_CLK>;
-			assigned-clock-rates = <24000000>;
-			power-domains = <&pd IMX_SC_R_I2C_1>;
-			status = "disabled";
-		};
-
-		adma_i2c2: i2c@5a820000 {
-			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
-			reg = <0x5a820000 0x4000>;
-			interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C2_CLK>;
-			clock-names = "per";
-			assigned-clocks = <&clk IMX_ADMA_I2C2_CLK>;
-			assigned-clock-rates = <24000000>;
-			power-domains = <&pd IMX_SC_R_I2C_2>;
-			status = "disabled";
-		};
-
-		adma_i2c3: i2c@5a830000 {
-			compatible = "fsl,imx8qxp-lpi2c", "fsl,imx7ulp-lpi2c";
-			reg = <0x5a830000 0x4000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&adma_lpcg IMX_ADMA_LPCG_I2C3_CLK>;
-			clock-names = "per";
-			assigned-clocks = <&clk IMX_ADMA_I2C3_CLK>;
-			assigned-clock-rates = <24000000>;
-			power-domains = <&pd IMX_SC_R_I2C_3>;
-			status = "disabled";
-		};
-	};
-
-	conn_subsys: bus@5b000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x5b000000 0x0 0x5b000000 0x1000000>;
-
-		conn_lpcg: clock-controller@5b200000 {
-			compatible = "fsl,imx8qxp-lpcg-conn";
-			reg = <0x5b200000 0xb0000>;
-			#clock-cells = <1>;
-		};
-
-		usdhc1: mmc@5b010000 {
-			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-			interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x5b010000 0x10000>;
-			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
-			clock-names = "ipg", "per", "ahb";
-			power-domains = <&pd IMX_SC_R_SDHC_0>;
-			status = "disabled";
-		};
-
-		usdhc2: mmc@5b020000 {
-			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-			interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x5b020000 0x10000>;
-			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC1_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_PER_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC1_HCLK>;
-			clock-names = "ipg", "per", "ahb";
-			power-domains = <&pd IMX_SC_R_SDHC_1>;
-			fsl,tuning-start-tap = <20>;
-			fsl,tuning-step= <2>;
-			status = "disabled";
-		};
-
-		usdhc3: mmc@5b030000 {
-			compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
-			interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
-			reg = <0x5b030000 0x10000>;
-			clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC2_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_PER_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_SDHC2_HCLK>;
-			clock-names = "ipg", "per", "ahb";
-			power-domains = <&pd IMX_SC_R_SDHC_2>;
-			status = "disabled";
-		};
-
-		fec1: ethernet@5b040000 {
-			compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
-			reg = <0x5b040000 0x10000>;
-			interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&conn_lpcg IMX_CONN_LPCG_ENET0_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_ENET0_AHB_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_ENET0_TX_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_ENET0_ROOT_CLK>;
-			clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
-			fsl,num-tx-queues=<3>;
-			fsl,num-rx-queues=<3>;
-			power-domains = <&pd IMX_SC_R_ENET_0>;
-			status = "disabled";
-		};
-
-		fec2: ethernet@5b050000 {
-			compatible = "fsl,imx8qxp-fec", "fsl,imx6sx-fec";
-			reg = <0x5b050000 0x10000>;
-			interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
-					<GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&conn_lpcg IMX_CONN_LPCG_ENET1_IPG_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_ENET1_AHB_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_ENET1_TX_CLK>,
-				 <&conn_lpcg IMX_CONN_LPCG_ENET1_ROOT_CLK>;
-			clock-names = "ipg", "ahb", "enet_clk_ref", "ptp";
-			fsl,num-tx-queues=<3>;
-			fsl,num-rx-queues=<3>;
-			power-domains = <&pd IMX_SC_R_ENET_1>;
-			status = "disabled";
-		};
-	};
-
-	ddr_subsyss: bus@5c000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x5c000000 0x0 0x5c000000 0x1000000>;
-
-		ddr-pmu@5c020000 {
-			compatible = "fsl,imx8-ddr-pmu";
-			reg = <0x5c020000 0x10000>;
-			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-		};
-	};
-
-	lsio_subsys: bus@5d000000 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x5d000000 0x0 0x5d000000 0x1000000>;
-
-		lsio_gpio0: gpio@5d080000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d080000 0x10000>;
-			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_0>;
-		};
-
-		lsio_gpio1: gpio@5d090000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d090000 0x10000>;
-			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_1>;
-		};
-
-		lsio_gpio2: gpio@5d0a0000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d0a0000 0x10000>;
-			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_2>;
-		};
-
-		lsio_gpio3: gpio@5d0b0000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d0b0000 0x10000>;
-			interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_3>;
-		};
-
-		lsio_gpio4: gpio@5d0c0000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d0c0000 0x10000>;
-			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_4>;
-		};
-
-		lsio_gpio5: gpio@5d0d0000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d0d0000 0x10000>;
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_5>;
-		};
-
-		lsio_gpio6: gpio@5d0e0000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d0e0000 0x10000>;
-			interrupts = <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_6>;
-		};
-
-		lsio_gpio7: gpio@5d0f0000 {
-			compatible = "fsl,imx8qxp-gpio", "fsl,imx35-gpio";
-			reg = <0x5d0f0000 0x10000>;
-			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			power-domains = <&pd IMX_SC_R_GPIO_7>;
-		};
-
-		lsio_mu0: mailbox@5d1b0000 {
-			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
-			reg = <0x5d1b0000 0x10000>;
-			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <2>;
-			status = "disabled";
-		};
-
-		lsio_mu1: mailbox@5d1c0000 {
-			compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
-			reg = <0x5d1c0000 0x10000>;
-			interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <2>;
-		};
-
-		lsio_mu2: mailbox@5d1d0000 {
-			compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
-			reg = <0x5d1d0000 0x10000>;
-			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <2>;
-			status = "disabled";
-		};
-
-		lsio_mu3: mailbox@5d1e0000 {
-			compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
-			reg = <0x5d1e0000 0x10000>;
-			interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <2>;
-			status = "disabled";
-		};
-
-		lsio_mu4: mailbox@5d1f0000 {
-			compatible = "fsl,imx8-mu-scu", "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
-			reg = <0x5d1f0000 0x10000>;
-			interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <2>;
-			status = "disabled";
-		};
-
-		lsio_mu13: mailbox@5d280000 {
-			compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu";
-			reg = <0x5d280000 0x10000>;
-			interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-			#mbox-cells = <2>;
-			power-domains = <&pd IMX_SC_R_MU_13A>;
-		};
-
-		lsio_lpcg: clock-controller@5d400000 {
-			compatible = "fsl,imx8qxp-lpcg-lsio";
-			reg = <0x5d400000 0x400000>;
-			#clock-cells = <1>;
-		};
-	};
-
 	thermal_zones: thermal-zones {
 		cpu-thermal0 {
 			polling-delay-passive = <250>;
@@ -629,4 +256,14 @@
 			};
 		};
 	};
+
+	/* sorted in register address */
+	#include "imx8-ss-adma.dtsi"
+	#include "imx8-ss-conn.dtsi"
+	#include "imx8-ss-ddr.dtsi"
+	#include "imx8-ss-lsio.dtsi"
 };
+
+#include "imx8qxp-ss-adma.dtsi"
+#include "imx8qxp-ss-conn.dtsi"
+#include "imx8qxp-ss-lsio.dtsi"