diff options
| author | Johan Jonker <jbx6244@gmail.com> | 2020-01-10 15:21:28 +0100 |
|---|---|---|
| committer | Heiko Stuebner <heiko@sntech.de> | 2020-01-13 10:21:38 +0100 |
| commit | 96ff264bccb22175bbe2185a1eb5204ca3c5f03f (patch) | |
| tree | d02a747512b732e7658f03d87d28122e05b58ded /arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi | |
| parent | 2be6a280144e521248a4bdefb691a0a97e604294 (diff) | |
| download | linux-96ff264bccb22175bbe2185a1eb5204ca3c5f03f.tar.gz | |
arm64: dts: rockchip: add reg property to brcmf sub-nodes
An experimental test with the command below gives this error:
rk3399-firefly.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-orangepi.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-captain.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-v.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
So fix this by adding a reg property to the brcmf sub node.
Also add #address-cells and #size-cells to prevent more warnings.
make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110142128.13522-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi | 3 |
1 files changed, 3 insertions, 0 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi index 4944d78a0a1c..e87a04477440 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi @@ -654,9 +654,12 @@ sd-uhs-sdr104; vqmmc-supply = <&vcc1v8_s3>; vmmc-supply = <&vccio_sd>; + #address-cells = <1>; + #size-cells = <0>; status = "okay"; brcmf: wifi@1 { + reg = <1>; compatible = "brcm,bcm4329-fmac"; interrupt-parent = <&gpio0>; interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; |