diff options
| author | Nicolas Frattaroli <frattaroli.nicolas@gmail.com> | 2022-07-21 10:33:00 +0200 |
|---|---|---|
| committer | Heiko Stuebner <heiko@sntech.de> | 2022-08-23 14:34:36 +0200 |
| commit | db7ad41538439a3dcfebd738959c7526b4e7d528 (patch) | |
| tree | 02207c57be80d9a20bd50238859f5ea10761c1d7 /arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts | |
| parent | 1c23f9e627a7b412978b4e852793c5e3c3efc555 (diff) | |
| download | linux-db7ad41538439a3dcfebd738959c7526b4e7d528.tar.gz | |
arm64: dts: rockchip: Add analog audio output on quartz64-b
This adds the necessary device tree changes to enable analog
audio output on the PINE64 Quartz64 Model B with its RK809
codec.
The headphone detection pin is left out for now because I couldn't
get it to work and am not sure if it even matters, but for future
reference: It's pin GPIO4 RK_PC4, named HP_DET_L_GPIO4_C4 in the
schematic.
Signed-off-by: Nicolas Frattaroli <frattaroli.nicolas@gmail.com>
Link: https://lore.kernel.org/r/20220721083301.3711-1-frattaroli.nicolas@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Diffstat (limited to 'arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts')
| -rw-r--r-- | arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts | 32 |
1 files changed, 31 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts index 02d5f5a8ca03..3897980d69d1 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts @@ -42,6 +42,21 @@ }; }; + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; + sdio_pwrseq: sdio-pwrseq { status = "okay"; compatible = "mmc-pwrseq-simple"; @@ -177,11 +192,16 @@ reg = <0x20>; interrupt-parent = <&gpio0>; interrupts = <RK_PA7 IRQ_TYPE_LEVEL_LOW>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; clock-output-names = "rk808-clkout1", "rk808-clkout2"; pinctrl-names = "default"; - pinctrl-0 = <&pmic_int>; + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; rockchip,system-power-controller; + #sound-dai-cells = <0>; wakeup-source; #clock-cells = <1>; @@ -420,6 +440,16 @@ status = "disabled"; }; +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx + &i2s1m0_lrcktx + &i2s1m0_sdi0 + &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; +}; + &mdio1 { rgmii_phy1: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; |