arch: remove m32r port

The Mitsubishi/Renesas m32r architecture has been around for many years,
but the Linux port has been obsolete for a very long time as well, with
the last significant updates done for linux-2.6.14.

While some m32r microcontrollers are still being marketed by Renesas,
those are apparently no longer possible to support, mainly due to the
lack of an external memory interface.

Hirokazu Takata was the maintainer until the architecture got marked
Orphaned in 2014.

Link: http://www.linux-m32r.org/
Link: https://www.renesas.com/en-eu/products/microcontrollers-microprocessors/m32r.html
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

6 files changed, 0 insertions, 1594 deletions

diff --git a/arch/m32r/platforms/m32700ut/Makefile b/arch/m32r/platforms/m32700ut/Makefile
deleted file mode 100644
index 0de59084f21c..000000000000
--- a/arch/m32r/platforms/m32700ut/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-y	:= setup.o io.o
diff --git a/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB
deleted file mode 100644
index 525dab46982b..000000000000
--- a/arch/m32r/platforms/m32700ut/dot.gdbinit_200MHz_16MB
+++ /dev/null
@@ -1,249 +0,0 @@
-# .gdbinit file
-# $Id: dot.gdbinit_200MHz_16MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
-#-----
-# NOTE: this file is generated by a script, "gen_gdbinit.pl".
-# (Please type "gen_gdbinit.pl --help" and check the help message).
-# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
-#-----
-# target platform: m32700ut
-
-# setting
-set width 0d70
-set radix 0d16
-
-debug_chaos
-
-# clk xin:cpu:bif:bus=25:200:50:50
-define clock_init
-  set *(unsigned long *)0x00ef4008 = 0x00000000
-  set *(unsigned long *)0x00ef4004 = 0
-  shell sleep 0.1
-  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
-  # and switch off PLL, before resetting the clock gear ratio.
-
-  set *(unsigned long *)0x00ef4024 = 2
-  set *(unsigned long *)0x00ef4020 = 2
-  set *(unsigned long *)0x00ef4010 = 0
-  set *(unsigned long *)0x00ef4014 = 0
-  set *(unsigned long *)0x00ef4004 = 3
-  shell sleep 0.1
-  set *(unsigned long *)0x00ef4008 = 0x00000200
-end
-
-# Initialize SDRAM controller
-define sdram_init
-  # SDIR0
-  set *(unsigned long *)0x00ef6008 = 0x00000182
-  # SDIR1
-  set *(unsigned long *)0x00ef600c = 0x00000001
-  # Initialize wait
-  shell sleep 0.1
-  # Ch0-MOD
-  set *(unsigned long *)0x00ef602c = 0x00000020
-  # Ch0-TR
-  set *(unsigned long *)0x00ef6028 = 0x00041302
-  # Ch0-ADR (size:16MB)
-  set *(unsigned long *)0x00ef6020 = 0x08000002
-  # AutoRef On
-  set *(unsigned long *)0x00ef6004 = 0x00010517
-  # Access enable
-  set *(unsigned long *)0x00ef6024 = 0x00000001
-end
-document sdram_init
-  SDRAM controller initialization
-  0x08000000 - 0x08ffffff (16MB)
-end
-
-# Initialize BSEL3 for UT-CFC
-define cfc_init
-  set $sfrbase = 0xa0ef0000
-# too fast
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
-end
-document cfc_init
-  CF controller initialization
-end
-
-# MMU enable
-define mmu_enable
-  set $evb=0x88000000
-  set *(unsigned long *)0xffff0024=1
-end
-
-# MMU disable
-define mmu_disable
-  set $evb=0
-  set *(unsigned long *)0xffff0024=0
-end
-
-# Show TLB entries
-define show_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set $tlb_tag = *(unsigned long*)$addr
-    set $tlb_data = *(unsigned long*)($addr + 4)
-    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define itlb
-  set $itlb=0xfe000000
-  show_tlb_entries $itlb 0d32
-end
-define dtlb
-  set $dtlb=0xfe000800
-  show_tlb_entries $dtlb 0d32
-end
-
-# Initialize TLB entries
-define init_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set *(unsigned long *)($addr + 0x4) = 0
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define tlb_init
-  set $itlb=0xfe000000
-  init_tlb_entries $itlb 0d32
-  set $dtlb=0xfe000800
-  init_tlb_entries $dtlb 0d32
-end
-
-# Show current task structure
-define show_current
-  set $current = $spi & 0xffffe000
-  printf "$current=0x%08lX\n",$current
-  print *(struct task_struct *)$current
-end
-
-# Show user assigned task structure
-define show_task
-  set  = $arg0 & 0xffffe000
-  printf "$task=0x%08lX\n",$task
-  print *(struct task_struct *)$task
-end
-document show_task
-  Show user assigned task structure
-  arg0 : task structure address
-end
-
-# Show M32R registers
-define show_regs
-  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
-  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
-  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
-  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
-  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
-  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
-  printf "EVB[0x%08lX]\n",$evb
-end
-
-# Setup all
-define setup
-  use_mon_code
-  set *(unsigned int)0xfffffffc=0x60
-  shell sleep 0.1
-  clock_init
-  shell sleep 0.1
-  # SDRAM: 16MB
-  set *(unsigned long *)0x00ef6020 = 0x08000002
-  cfc_init
-  # USB
-  set *(unsigned short *)0xb0301000 = 0x100
-
-  set $evb=0x08000000
-end
-
-# Load modules
-define load_modules
-  use_debug_dma
-  load
-end
-
-# Set kernel parameters
-define set_kernel_parameters
-  set $param = (void*)0x08001000
-  # INITRD_START
-#  set *(unsigned long *)($param + 0x0010) = 0x08300000
-  # INITRD_SIZE
-#  set *(unsigned long *)($param + 0x0014) = 0x00000000
-  # M32R_CPUCLK
-  set *(unsigned long *)($param + 0x0018) = 0d200000000
-  # M32R_BUSCLK
-  set *(unsigned long *)($param + 0x001c) = 0d50000000
-
-  # M32R_TIMER_DIVIDE
-  set *(unsigned long *)($param + 0x0020) = 0d128
-
-  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=16M \0"
-end
-
-# Boot
-define boot
-  set_kernel_parameters
-  set $fp = 0
-  set $pc = 0x08002000
-# set *(unsigned char *)0xffffffff = 0x03
-  si
-  c
-end
-
-# Set breakpoints
-define set_breakpoints
-  b *0x08000030
-end
-
-# Restart
-define restart
-  sdireset
-  sdireset
-  set $pc = 0
-  b *0x04001000
-  b *0x08001000
-  b *0x08002000
-  si
-  c
-  tlb_init
-  del
-  setup
-  load_modules
-  boot
-end
-
-define si
-  stepi
-  x/i $pc
-  show_reg
-end
-
-sdireset
-sdireset
-file vmlinux
-target m32rsdi
-set $pc = 0
-b *0x04001000
-b *0x08001000
-b *0x08002000
-c
-tlb_init
-del
-setup
-load_modules
-boot
-
diff --git a/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB
deleted file mode 100644
index aa503657a49b..000000000000
--- a/arch/m32r/platforms/m32700ut/dot.gdbinit_300MHz_32MB
+++ /dev/null
@@ -1,249 +0,0 @@
-# .gdbinit file
-# $Id: dot.gdbinit_300MHz_32MB,v 1.2 2004/10/20 03:02:27 fujiwara Exp $
-#-----
-# NOTE: this file is generated by a script, "gen_gdbinit.pl".
-# (Please type "gen_gdbinit.pl --help" and check the help message).
-# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
-#-----
-# target platform: m32700ut
-
-# setting
-set width 0d70
-set radix 0d16
-
-debug_chaos
-
-# clk xin:cpu:bif:bus=25:300:75:75
-define clock_init
-  set *(unsigned long *)0x00ef4008 = 0x00000000
-  set *(unsigned long *)0x00ef4004 = 0
-  shell sleep 0.1
-  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
-  # and switch off PLL, before resetting the clock gear ratio.
-
-  set *(unsigned long *)0x00ef4024 = 2
-  set *(unsigned long *)0x00ef4020 = 2
-  set *(unsigned long *)0x00ef4010 = 0
-  set *(unsigned long *)0x00ef4014 = 0
-  set *(unsigned long *)0x00ef4004 = 5
-  shell sleep 0.1
-  set *(unsigned long *)0x00ef4008 = 0x00000200
-end
-
-# Initialize SDRAM controller
-define sdram_init
-  # SDIR0
-  set *(unsigned long *)0x00ef6008 = 0x00000182
-  # SDIR1
-  set *(unsigned long *)0x00ef600c = 0x00000001
-  # Initialize wait
-  shell sleep 0.1
-  # Ch0-MOD
-  set *(unsigned long *)0x00ef602c = 0x00000020
-  # Ch0-TR
-  set *(unsigned long *)0x00ef6028 = 0x00051502
-  # Ch0-ADR (size:32MB)
-  set *(unsigned long *)0x00ef6020 = 0x08000003
-  # AutoRef On
-  set *(unsigned long *)0x00ef6004 = 0x00010e24
-  # Access enable
-  set *(unsigned long *)0x00ef6024 = 0x00000001
-end
-document sdram_init
-  SDRAM controller initialization
-  0x08000000 - 0x09ffffff (32MB)
-end
-
-# Initialize BSEL3 for UT-CFC
-define cfc_init
-  set $sfrbase = 0xa0ef0000
-# too fast
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
-end
-document cfc_init
-  CF controller initialization
-end
-
-# MMU enable
-define mmu_enable
-  set $evb=0x88000000
-  set *(unsigned long *)0xffff0024=1
-end
-
-# MMU disable
-define mmu_disable
-  set $evb=0
-  set *(unsigned long *)0xffff0024=0
-end
-
-# Show TLB entries
-define show_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set $tlb_tag = *(unsigned long*)$addr
-    set $tlb_data = *(unsigned long*)($addr + 4)
-    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define itlb
-  set $itlb=0xfe000000
-  show_tlb_entries $itlb 0d32
-end
-define dtlb
-  set $dtlb=0xfe000800
-  show_tlb_entries $dtlb 0d32
-end
-
-# Initialize TLB entries
-define init_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set *(unsigned long *)($addr + 0x4) = 0
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define tlb_init
-  set $itlb=0xfe000000
-  init_tlb_entries $itlb 0d32
-  set $dtlb=0xfe000800
-  init_tlb_entries $dtlb 0d32
-end
-
-# Show current task structure
-define show_current
-  set $current = $spi & 0xffffe000
-  printf "$current=0x%08lX\n",$current
-  print *(struct task_struct *)$current
-end
-
-# Show user assigned task structure
-define show_task
-  set  = $arg0 & 0xffffe000
-  printf "$task=0x%08lX\n",$task
-  print *(struct task_struct *)$task
-end
-document show_task
-  Show user assigned task structure
-  arg0 : task structure address
-end
-
-# Show M32R registers
-define show_regs
-  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
-  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
-  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
-  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
-  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
-  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
-  printf "EVB[0x%08lX]\n",$evb
-end
-
-# Setup all
-define setup
-  use_mon_code
-  set *(unsigned int)0xfffffffc=0x60
-  shell sleep 0.1
-  clock_init
-  shell sleep 0.1
-  # SDRAM: 32MB
-  set *(unsigned long *)0x00ef6020 = 0x08000003
-  cfc_init
-  # USB
-  set *(unsigned short *)0xb0301000 = 0x100
-
-  set $evb=0x08000000
-end
-
-# Load modules
-define load_modules
-  use_debug_dma
-  load
-end
-
-# Set kernel parameters
-define set_kernel_parameters
-  set $param = (void*)0x08001000
-  # INITRD_START
-#  set *(unsigned long *)($param + 0x0010) = 0x08300000
-  # INITRD_SIZE
-#  set *(unsigned long *)($param + 0x0014) = 0x00000000
-  # M32R_CPUCLK
-  set *(unsigned long *)($param + 0x0018) = 0d300000000
-  # M32R_BUSCLK
-  set *(unsigned long *)($param + 0x001c) = 0d75000000
-
-  # M32R_TIMER_DIVIDE
-  set *(unsigned long *)($param + 0x0020) = 0d128
-
-  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0"
-end
-
-# Boot
-define boot
-  set_kernel_parameters
-  set $fp = 0
-  set $pc = 0x08002000
-# set *(unsigned char *)0xffffffff = 0x03
-  si
-  c
-end
-
-# Set breakpoints
-define set_breakpoints
-  b *0x08000030
-end
-
-# Restart
-define restart
-  sdireset
-  sdireset
-  set $pc = 0
-  b *0x04001000
-  b *0x08001000
-  b *0x08002000
-  si
-  c
-  tlb_init
-  del
-  setup
-  load_modules
-  boot
-end
-
-define si
-  stepi
-  x/i $pc
-  show_reg
-end
-
-sdireset
-sdireset
-file vmlinux
-target m32rsdi
-set $pc = 0
-b *0x04001000
-b *0x08001000
-b *0x08002000
-c
-tlb_init
-del
-setup
-load_modules
-boot
-
diff --git a/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB b/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB
deleted file mode 100644
index adc608aab2fe..000000000000
--- a/arch/m32r/platforms/m32700ut/dot.gdbinit_400MHz_32MB
+++ /dev/null
@@ -1,249 +0,0 @@
-# .gdbinit file
-# $Id: dot.gdbinit_400MHz_32MB,v 1.1 2004/10/21 01:41:27 fujiwara Exp $
-#-----
-# NOTE: this file is generated by a script, "gen_gdbinit.pl".
-# (Please type "gen_gdbinit.pl --help" and check the help message).
-# $ Id: gen_gdbinit.pl,v 1.12 2004/07/26 09:56:10 takata Exp $
-#-----
-# target platform: m32700ut
-
-# setting
-set width 0d70
-set radix 0d16
-
-debug_chaos
-
-# clk xin:cpu:bif:bus=25:400:100:50
-define clock_init
-  set *(unsigned long *)0x00ef4008 = 0x00000000
-  set *(unsigned long *)0x00ef4004 = 0
-  shell sleep 0.1
-  # NOTE: Please change the master clock source from PLL-clock to Xin-clock
-  # and switch off PLL, before resetting the clock gear ratio.
-
-  set *(unsigned long *)0x00ef4024 = 3
-  set *(unsigned long *)0x00ef4020 = 2
-  set *(unsigned long *)0x00ef4010 = 0
-  set *(unsigned long *)0x00ef4014 = 0
-  set *(unsigned long *)0x00ef4004 = 7
-  shell sleep 0.1
-  set *(unsigned long *)0x00ef4008 = 0x00000200
-end
-
-# Initialize SDRAM controller
-define sdram_init
-  # SDIR0
-  set *(unsigned long *)0x00ef6008 = 0x00000182
-  # SDIR1
-  set *(unsigned long *)0x00ef600c = 0x00000001
-  # Initialize wait
-  shell sleep 0.1
-  # Ch0-MOD
-  set *(unsigned long *)0x00ef602c = 0x00000020
-  # Ch0-TR
-  set *(unsigned long *)0x00ef6028 = 0x00041302
-  # Ch0-ADR (size:32MB)
-  set *(unsigned long *)0x00ef6020 = 0x08000003
-  # AutoRef On
-  set *(unsigned long *)0x00ef6004 = 0x00010517
-  # Access enable
-  set *(unsigned long *)0x00ef6024 = 0x00000001
-end
-document sdram_init
-  SDRAM controller initialization
-  0x08000000 - 0x09ffffff (32MB)
-end
-
-# Initialize BSEL3 for UT-CFC
-define cfc_init
-  set $sfrbase = 0xa0ef0000
-# too fast
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x0b0b8000
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x00102204
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f8000
-#  set *(unsigned long *)($sfrbase + 0x5300) = 0x1f1f1fdf
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013220f
-#  set *(unsigned long *)($sfrbase + 0x5304) = 0x0013330f
-end
-document cfc_init
-  CF controller initialization
-end
-
-# MMU enable
-define mmu_enable
-  set $evb=0x88000000
-  set *(unsigned long *)0xffff0024=1
-end
-
-# MMU disable
-define mmu_disable
-  set $evb=0
-  set *(unsigned long *)0xffff0024=0
-end
-
-# Show TLB entries
-define show_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set $tlb_tag = *(unsigned long*)$addr
-    set $tlb_data = *(unsigned long*)($addr + 4)
-    printf " [%2d] 0x%08lx : 0x%08lx - 0x%08lx\n", $i, $addr, $tlb_tag, $tlb_data
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define itlb
-  set $itlb=0xfe000000
-  show_tlb_entries $itlb 0d32
-end
-define dtlb
-  set $dtlb=0xfe000800
-  show_tlb_entries $dtlb 0d32
-end
-
-# Initialize TLB entries
-define init_tlb_entries
-  set $i = 0
-  set $addr = $arg0
-  set $nr_entries = $arg1
-  use_mon_code
-  while ($i < $nr_entries)
-    set *(unsigned long *)($addr + 0x4) = 0
-    set $i = $i + 1
-    set $addr = $addr + 8
-  end
-  use_debug_dma
-end
-define tlb_init
-  set $itlb=0xfe000000
-  init_tlb_entries $itlb 0d32
-  set $dtlb=0xfe000800
-  init_tlb_entries $dtlb 0d32
-end
-
-# Show current task structure
-define show_current
-  set $current = $spi & 0xffffe000
-  printf "$current=0x%08lX\n",$current
-  print *(struct task_struct *)$current
-end
-
-# Show user assigned task structure
-define show_task
-  set  = $arg0 & 0xffffe000
-  printf "$task=0x%08lX\n",$task
-  print *(struct task_struct *)$task
-end
-document show_task
-  Show user assigned task structure
-  arg0 : task structure address
-end
-
-# Show M32R registers
-define show_regs
-  printf " R0[0x%08lX]   R1[0x%08lX]   R2[0x%08lX]   R3[0x%08lX]\n",$r0,$r1,$r2,$r3
-  printf " R4[0x%08lX]   R5[0x%08lX]   R6[0x%08lX]   R7[0x%08lX]\n",$r4,$r5,$r6,$r7
-  printf " R8[0x%08lX]   R9[0x%08lX]  R10[0x%08lX]  R11[0x%08lX]\n",$r8,$r9,$r10,$r11
-  printf "R12[0x%08lX]   FP[0x%08lX]   LR[0x%08lX]   SP[0x%08lX]\n",$r12,$fp,$lr,$sp
-  printf "PSW[0x%08lX]  CBR[0x%08lX]  SPI[0x%08lX]  SPU[0x%08lX]\n",$psw,$cbr,$spi,$spu
-  printf "BPC[0x%08lX]   PC[0x%08lX] ACCL[0x%08lX] ACCH[0x%08lX]\n",$bpc,$pc,$accl,$acch
-  printf "EVB[0x%08lX]\n",$evb
-end
-
-# Setup all
-define setup
-  use_mon_code
-  set *(unsigned int)0xfffffffc=0x60
-  shell sleep 0.1
-  clock_init
-  shell sleep 0.1
-  # SDRAM: 32MB
-  set *(unsigned long *)0x00ef6020 = 0x08000003
-  cfc_init
-  # USB
-  set *(unsigned short *)0xb0301000 = 0x100
-
-  set $evb=0x08000000
-end
-
-# Load modules
-define load_modules
-  use_debug_dma
-  load
-end
-
-# Set kernel parameters
-define set_kernel_parameters
-  set $param = (void*)0x08001000
-  # INITRD_START
-#  set *(unsigned long *)($param + 0x0010) = 0x08300000
-  # INITRD_SIZE
-#  set *(unsigned long *)($param + 0x0014) = 0x00000000
-  # M32R_CPUCLK
-  set *(unsigned long *)($param + 0x0018) = 0d400000000
-  # M32R_BUSCLK
-  set *(unsigned long *)($param + 0x001c) = 0d50000000
-
-  # M32R_TIMER_DIVIDE
-  set *(unsigned long *)($param + 0x0020) = 0d128
-
-  set {char[0x200]}($param + 0x100) = "console=ttyS0,115200n8x console=tty1 root=/dev/nfsroot nfsroot=192.168.0.1:/project/m32r-linux/export/rootfs,rsize=1024,wsize=1024 nfsaddrs=192.168.0.101:192.168.0.1:192.168.0.1:255.255.255.0:mappi001 mem=32M \0"
-end
-
-# Boot
-define boot
-  set_kernel_parameters
-  set $fp = 0
-  set $pc = 0x08002000
-# set *(unsigned char *)0xffffffff = 0x03
-  si
-  c
-end
-
-# Set breakpoints
-define set_breakpoints
-  b *0x08000030
-end
-
-# Restart
-define restart
-  sdireset
-  sdireset
-  set $pc = 0
-  b *0x04001000
-  b *0x08001000
-  b *0x08002000
-  si
-  c
-  tlb_init
-  del
-  setup
-  load_modules
-  boot
-end
-
-define si
-  stepi
-  x/i $pc
-  show_reg
-end
-
-sdireset
-sdireset
-file vmlinux
-target m32rsdi
-set $pc = 0
-b *0x04001000
-b *0x08001000
-b *0x08002000
-c
-tlb_init
-del
-setup
-load_modules
-boot
-
diff --git a/arch/m32r/platforms/m32700ut/io.c b/arch/m32r/platforms/m32700ut/io.c
deleted file mode 100644
index 6862586e58db..000000000000
--- a/arch/m32r/platforms/m32700ut/io.c
+++ /dev/null
@@ -1,395 +0,0 @@
-/*
- *  linux/arch/m32r/platforms/m32700ut/io.c
- *
- *  Typical I/O routines for M32700UT board.
- *
- *  Copyright (c) 2001-2005  Hiroyuki Kondo, Hirokazu Takata,
- *                           Hitoshi Yamamoto, Takeo Takahashi
- *
- *  This file is subject to the terms and conditions of the GNU General
- *  Public License.  See the file "COPYING" in the main directory of this
- *  archive for more details.
- */
-
-#include <asm/m32r.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/byteorder.h>
-
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-#include <linux/types.h>
-
-#define M32R_PCC_IOMAP_SIZE 0x1000
-
-#define M32R_PCC_IOSTART0 0x1000
-#define M32R_PCC_IOEND0   (M32R_PCC_IOSTART0 + M32R_PCC_IOMAP_SIZE - 1)
-
-extern void pcc_ioread_byte(int, unsigned long, void *, size_t, size_t, int);
-extern void pcc_ioread_word(int, unsigned long, void *, size_t, size_t, int);
-extern void pcc_iowrite_byte(int, unsigned long, void *, size_t, size_t, int);
-extern void pcc_iowrite_word(int, unsigned long, void *, size_t, size_t, int);
-#endif /* CONFIG_PCMCIA && CONFIG_M32R_CFC */
-
-#define PORT2ADDR(port)		_port2addr(port)
-#define PORT2ADDR_USB(port)	_port2addr_usb(port)
-
-static inline void *_port2addr(unsigned long port)
-{
-	return (void *)(port | NONCACHE_OFFSET);
-}
-
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-static inline void *__port2addr_ata(unsigned long port)
-{
-	static int	dummy_reg;
-
-	switch (port) {
-	case 0x1f0:	return (void *)(0x0c002000 | NONCACHE_OFFSET);
-	case 0x1f1:	return (void *)(0x0c012800 | NONCACHE_OFFSET);
-	case 0x1f2:	return (void *)(0x0c012002 | NONCACHE_OFFSET);
-	case 0x1f3:	return (void *)(0x0c012802 | NONCACHE_OFFSET);
-	case 0x1f4:	return (void *)(0x0c012004 | NONCACHE_OFFSET);
-	case 0x1f5:	return (void *)(0x0c012804 | NONCACHE_OFFSET);
-	case 0x1f6:	return (void *)(0x0c012006 | NONCACHE_OFFSET);
-	case 0x1f7:	return (void *)(0x0c012806 | NONCACHE_OFFSET);
-	case 0x3f6:	return (void *)(0x0c01200e | NONCACHE_OFFSET);
-	default: 	return (void *)&dummy_reg;
-	}
-}
-#endif
-
-/*
- * M32700UT-LAN is located in the extended bus space
- * from 0x10000000 to 0x13ffffff on physical address.
- * The base address of LAN controller(LAN91C111) is 0x300.
- */
-#define LAN_IOSTART	(0x300 | NONCACHE_OFFSET)
-#define LAN_IOEND	(0x320 | NONCACHE_OFFSET)
-static inline void *_port2addr_ne(unsigned long port)
-{
-	return (void *)(port + 0x10000000);
-}
-static inline void *_port2addr_usb(unsigned long port)
-{
-	return (void *)((port & 0x0f) + NONCACHE_OFFSET + 0x10303000);
-}
-
-static inline void delay(void)
-{
-	__asm__ __volatile__ ("push r0; \n\t pop r0;" : : :"memory");
-}
-
-/*
- * NIC I/O function
- */
-
-#define PORT2ADDR_NE(port)  _port2addr_ne(port)
-
-static inline unsigned char _ne_inb(void *portp)
-{
-	return *(volatile unsigned char *)portp;
-}
-
-static inline unsigned short _ne_inw(void *portp)
-{
-	return (unsigned short)le16_to_cpu(*(volatile unsigned short *)portp);
-}
-
-static inline void _ne_insb(void *portp, void *addr, unsigned long count)
-{
-	unsigned char *buf = (unsigned char *)addr;
-
-	while (count--)
-		*buf++ = _ne_inb(portp);
-}
-
-static inline void _ne_outb(unsigned char b, void *portp)
-{
-	*(volatile unsigned char *)portp = b;
-}
-
-static inline void _ne_outw(unsigned short w, void *portp)
-{
-	*(volatile unsigned short *)portp = cpu_to_le16(w);
-}
-
-unsigned char _inb(unsigned long port)
-{
-	if (port >= LAN_IOSTART && port < LAN_IOEND)
-		return _ne_inb(PORT2ADDR_NE(port));
-
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		return *(volatile unsigned char *)__port2addr_ata(port);
-	}
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		unsigned char b;
-		pcc_ioread_byte(0, port, &b, sizeof(b), 1, 0);
-		return b;
-	} else
-#endif
-
-	return *(volatile unsigned char *)PORT2ADDR(port);
-}
-
-unsigned short _inw(unsigned long port)
-{
-	if (port >= LAN_IOSTART && port < LAN_IOEND)
-		return _ne_inw(PORT2ADDR_NE(port));
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		return *(volatile unsigned short *)__port2addr_ata(port);
-	}
-#endif
-#if defined(CONFIG_USB)
-	else if(port >= 0x340 && port < 0x3a0)
-		return *(volatile unsigned short *)PORT2ADDR_USB(port);
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		unsigned short w;
-		pcc_ioread_word(0, port, &w, sizeof(w), 1, 0);
-		return w;
-	} else
-#endif
-	return *(volatile unsigned short *)PORT2ADDR(port);
-}
-
-unsigned long _inl(unsigned long port)
-{
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		unsigned long l;
-		pcc_ioread_word(0, port, &l, sizeof(l), 1, 0);
-		return l;
-	} else
-#endif
-	return *(volatile unsigned long *)PORT2ADDR(port);
-}
-
-unsigned char _inb_p(unsigned long port)
-{
-	unsigned char v = _inb(port);
-	delay();
-	return (v);
-}
-
-unsigned short _inw_p(unsigned long port)
-{
-	unsigned short v = _inw(port);
-	delay();
-	return (v);
-}
-
-unsigned long _inl_p(unsigned long port)
-{
-	unsigned long v = _inl(port);
-	delay();
-	return (v);
-}
-
-void _outb(unsigned char b, unsigned long port)
-{
-	if (port >= LAN_IOSTART && port < LAN_IOEND)
-		_ne_outb(b, PORT2ADDR_NE(port));
-	else
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		*(volatile unsigned char *)__port2addr_ata(port) = b;
-	} else
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_iowrite_byte(0, port, &b, sizeof(b), 1, 0);
-	} else
-#endif
-		*(volatile unsigned char *)PORT2ADDR(port) = b;
-}
-
-void _outw(unsigned short w, unsigned long port)
-{
-	if (port >= LAN_IOSTART && port < LAN_IOEND)
-		_ne_outw(w, PORT2ADDR_NE(port));
-	else
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		*(volatile unsigned short *)__port2addr_ata(port) = w;
-	} else
-#endif
-#if defined(CONFIG_USB)
-	if(port >= 0x340 && port < 0x3a0)
-		*(volatile unsigned short *)PORT2ADDR_USB(port) = w;
-	else
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_iowrite_word(0, port, &w, sizeof(w), 1, 0);
-	} else
-#endif
-		*(volatile unsigned short *)PORT2ADDR(port) = w;
-}
-
-void _outl(unsigned long l, unsigned long port)
-{
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_iowrite_word(0, port, &l, sizeof(l), 1, 0);
-	} else
-#endif
-	*(volatile unsigned long *)PORT2ADDR(port) = l;
-}
-
-void _outb_p(unsigned char b, unsigned long port)
-{
-	_outb(b, port);
-	delay();
-}
-
-void _outw_p(unsigned short w, unsigned long port)
-{
-	_outw(w, port);
-	delay();
-}
-
-void _outl_p(unsigned long l, unsigned long port)
-{
-	_outl(l, port);
-	delay();
-}
-
-void _insb(unsigned int port, void *addr, unsigned long count)
-{
-	if (port >= LAN_IOSTART && port < LAN_IOEND)
-		_ne_insb(PORT2ADDR_NE(port), addr, count);
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		unsigned char *buf = addr;
-		unsigned char *portp = __port2addr_ata(port);
-		while (count--)
-			*buf++ = *(volatile unsigned char *)portp;
-	}
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_ioread_byte(0, port, (void *)addr, sizeof(unsigned char),
-				count, 1);
-	}
-#endif
-	else {
-		unsigned char *buf = addr;
-		unsigned char *portp = PORT2ADDR(port);
-		while (count--)
-			*buf++ = *(volatile unsigned char *)portp;
-	}
-}
-
-void _insw(unsigned int port, void *addr, unsigned long count)
-{
-	unsigned short *buf = addr;
-	unsigned short *portp;
-
-	if (port >= LAN_IOSTART && port < LAN_IOEND) {
-		/*
-		 * This portion is only used by smc91111.c to read data
-		 * from the DATA_REG. Do not swap the data.
-		 */
-		portp = PORT2ADDR_NE(port);
-		while (count--)
-			*buf++ = *(volatile unsigned short *)portp;
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_ioread_word(9, port, (void *)addr, sizeof(unsigned short),
-				count, 1);
-#endif
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		portp = __port2addr_ata(port);
-		while (count--)
-			*buf++ = *(volatile unsigned short *)portp;
-#endif
-	} else {
-		portp = PORT2ADDR(port);
-		while (count--)
-			*buf++ = *(volatile unsigned short *)portp;
-	}
-}
-
-void _insl(unsigned int port, void *addr, unsigned long count)
-{
-	unsigned long *buf = addr;
-	unsigned long *portp;
-
-	portp = PORT2ADDR(port);
-	while (count--)
-		*buf++ = *(volatile unsigned long *)portp;
-}
-
-void _outsb(unsigned int port, const void *addr, unsigned long count)
-{
-	const unsigned char *buf = addr;
-	unsigned char *portp;
-
-	if (port >= LAN_IOSTART && port < LAN_IOEND) {
-		portp = PORT2ADDR_NE(port);
-		while (count--)
-			_ne_outb(*buf++, portp);
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		portp = __port2addr_ata(port);
-		while (count--)
-			*(volatile unsigned char *)portp = *buf++;
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_iowrite_byte(0, port, (void *)addr, sizeof(unsigned char),
-				 count, 1);
-#endif
-	} else {
-		portp = PORT2ADDR(port);
-		while (count--)
-			*(volatile unsigned char *)portp = *buf++;
-	}
-}
-
-void _outsw(unsigned int port, const void *addr, unsigned long count)
-{
-	const unsigned short *buf = addr;
-	unsigned short *portp;
-
-	if (port >= LAN_IOSTART && port < LAN_IOEND) {
-		/*
-		 * This portion is only used by smc91111.c to write data
-		 * into the DATA_REG. Do not swap the data.
-		 */
-		portp = PORT2ADDR_NE(port);
-		while (count--)
-			*(volatile unsigned short *)portp = *buf++;
-#if defined(CONFIG_IDE) && !defined(CONFIG_M32R_CFC)
-	} else if ((port >= 0x1f0 && port <=0x1f7) || port == 0x3f6) {
-		portp = __port2addr_ata(port);
-		while (count--)
-			*(volatile unsigned short *)portp = *buf++;
-#endif
-#if defined(CONFIG_PCMCIA) && defined(CONFIG_M32R_CFC)
-	} else if (port >= M32R_PCC_IOSTART0 && port <= M32R_PCC_IOEND0) {
-		pcc_iowrite_word(9, port, (void *)addr, sizeof(unsigned short),
-				 count, 1);
-#endif
-	} else {
-		portp = PORT2ADDR(port);
-		while (count--)
-			*(volatile unsigned short *)portp = *buf++;
-	}
-}
-
-void _outsl(unsigned int port, const void *addr, unsigned long count)
-{
-	const unsigned long *buf = addr;
-	unsigned char *portp;
-
-	portp = PORT2ADDR(port);
-	while (count--)
-		*(volatile unsigned long *)portp = *buf++;
-}
diff --git a/arch/m32r/platforms/m32700ut/setup.c b/arch/m32r/platforms/m32700ut/setup.c
deleted file mode 100644
index 349eb341752c..000000000000
--- a/arch/m32r/platforms/m32700ut/setup.c
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- *  linux/arch/m32r/platforms/m32700ut/setup.c
- *
- *  Setup routines for Renesas M32700UT Board
- *
- *  Copyright (c) 2002-2005  Hiroyuki Kondo, Hirokazu Takata,
- *                           Hitoshi Yamamoto, Takeo Takahashi
- *
- *  This file is subject to the terms and conditions of the GNU General
- *  Public License.  See the file "COPYING" in the main directory of this
- *  archive for more details.
- */
-
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include <asm/m32r.h>
-#include <asm/io.h>
-
-/*
- * M32700 Interrupt Control Unit (Level 1)
- */
-#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
-
-icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
-
-static void disable_m32700ut_irq(unsigned int irq)
-{
-	unsigned long port, data;
-
-	port = irq2port(irq);
-	data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7;
-	outl(data, port);
-}
-
-static void enable_m32700ut_irq(unsigned int irq)
-{
-	unsigned long port, data;
-
-	port = irq2port(irq);
-	data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6;
-	outl(data, port);
-}
-
-static void mask_m32700ut(struct irq_data *data)
-{
-	disable_m32700ut_irq(data->irq);
-}
-
-static void unmask_m32700ut(struct irq_data *data)
-{
-	enable_m32700ut_irq(data->irq);
-}
-
-static void shutdown_m32700ut(struct irq_data *data)
-{
-	unsigned long port;
-
-	port = irq2port(data->irq);
-	outl(M32R_ICUCR_ILEVEL7, port);
-}
-
-static struct irq_chip m32700ut_irq_type =
-{
-	.name		= "M32700UT-IRQ",
-	.irq_shutdown	= shutdown_m32700ut,
-	.irq_mask	= mask_m32700ut,
-	.irq_unmask	= unmask_m32700ut
-};
-
-/*
- * Interrupt Control Unit of PLD on M32700UT (Level 2)
- */
-#define irq2pldirq(x)		((x) - M32700UT_PLD_IRQ_BASE)
-#define pldirq2port(x)		(unsigned long)((int)PLD_ICUCR1 + \
-				 (((x) - 1) * sizeof(unsigned short)))
-
-typedef struct {
-	unsigned short icucr;  /* ICU Control Register */
-} pld_icu_data_t;
-
-static pld_icu_data_t pld_icu_data[M32700UT_NUM_PLD_IRQ];
-
-static void disable_m32700ut_pld_irq(unsigned int irq)
-{
-	unsigned long port, data;
-	unsigned int pldirq;
-
-	pldirq = irq2pldirq(irq);
-	port = pldirq2port(pldirq);
-	data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
-	outw(data, port);
-}
-
-static void enable_m32700ut_pld_irq(unsigned int irq)
-{
-	unsigned long port, data;
-	unsigned int pldirq;
-
-	pldirq = irq2pldirq(irq);
-	port = pldirq2port(pldirq);
-	data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
-	outw(data, port);
-}
-
-static void mask_m32700ut_pld(struct irq_data *data)
-{
-	disable_m32700ut_pld_irq(data->irq);
-}
-
-static void unmask_m32700ut_pld(struct irq_data *data)
-{
-	enable_m32700ut_pld_irq(data->irq);
-	enable_m32700ut_irq(M32R_IRQ_INT1);
-}
-
-static void shutdown_m32700ut_pld_irq(struct irq_data *data)
-{
-	unsigned long port;
-	unsigned int pldirq;
-
-	pldirq = irq2pldirq(data->irq);
-	port = pldirq2port(pldirq);
-	outw(PLD_ICUCR_ILEVEL7, port);
-}
-
-static struct irq_chip m32700ut_pld_irq_type =
-{
-	.name		= "M32700UT-PLD-IRQ",
-	.irq_shutdown	= shutdown_m32700ut_pld_irq,
-	.irq_mask	= mask_m32700ut_pld,
-	.irq_unmask	= unmask_m32700ut_pld,
-};
-
-/*
- * Interrupt Control Unit of PLD on M32700UT-LAN (Level 2)
- */
-#define irq2lanpldirq(x)	((x) - M32700UT_LAN_PLD_IRQ_BASE)
-#define lanpldirq2port(x)	(unsigned long)((int)M32700UT_LAN_ICUCR1 + \
-				 (((x) - 1) * sizeof(unsigned short)))
-
-static pld_icu_data_t lanpld_icu_data[M32700UT_NUM_LAN_PLD_IRQ];
-
-static void disable_m32700ut_lanpld_irq(unsigned int irq)
-{
-	unsigned long port, data;
-	unsigned int pldirq;
-
-	pldirq = irq2lanpldirq(irq);
-	port = lanpldirq2port(pldirq);
-	data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
-	outw(data, port);
-}
-
-static void enable_m32700ut_lanpld_irq(unsigned int irq)
-{
-	unsigned long port, data;
-	unsigned int pldirq;
-
-	pldirq = irq2lanpldirq(irq);
-	port = lanpldirq2port(pldirq);
-	data = lanpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
-	outw(data, port);
-}
-
-static void mask_m32700ut_lanpld(struct irq_data *data)
-{
-	disable_m32700ut_lanpld_irq(data->irq);
-}
-
-static void unmask_m32700ut_lanpld(struct irq_data *data)
-{
-	enable_m32700ut_lanpld_irq(data->irq);
-	enable_m32700ut_irq(M32R_IRQ_INT0);
-}
-
-static void shutdown_m32700ut_lanpld(struct irq_data *data)
-{
-	unsigned long port;
-	unsigned int pldirq;
-
-	pldirq = irq2lanpldirq(data->irq);
-	port = lanpldirq2port(pldirq);
-	outw(PLD_ICUCR_ILEVEL7, port);
-}
-
-static struct irq_chip m32700ut_lanpld_irq_type =
-{
-	.name		= "M32700UT-PLD-LAN-IRQ",
-	.irq_shutdown	= shutdown_m32700ut_lanpld,
-	.irq_mask	= mask_m32700ut_lanpld,
-	.irq_unmask	= unmask_m32700ut_lanpld,
-};
-
-/*
- * Interrupt Control Unit of PLD on M32700UT-LCD (Level 2)
- */
-#define irq2lcdpldirq(x)	((x) - M32700UT_LCD_PLD_IRQ_BASE)
-#define lcdpldirq2port(x)	(unsigned long)((int)M32700UT_LCD_ICUCR1 + \
-				 (((x) - 1) * sizeof(unsigned short)))
-
-#ifdef CONFIG_USB
-static pld_icu_data_t lcdpld_icu_data[M32700UT_NUM_LCD_PLD_IRQ];
-
-static void disable_m32700ut_lcdpld_irq(unsigned int irq)
-{
-	unsigned long port, data;
-	unsigned int pldirq;
-
-	pldirq = irq2lcdpldirq(irq);
-	port = lcdpldirq2port(pldirq);
-	data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
-	outw(data, port);
-}
-
-static void enable_m32700ut_lcdpld_irq(unsigned int irq)
-{
-	unsigned long port, data;
-	unsigned int pldirq;
-
-	pldirq = irq2lcdpldirq(irq);
-	port = lcdpldirq2port(pldirq);
-	data = lcdpld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
-	outw(data, port);
-}
-
-static void mask_m32700ut_lcdpld(struct irq_data *data)
-{
-	disable_m32700ut_lcdpld_irq(data->irq);
-}
-
-static void unmask_m32700ut_lcdpld(struct irq_data *data)
-{
-	enable_m32700ut_lcdpld_irq(data->irq);
-	enable_m32700ut_irq(M32R_IRQ_INT2);
-}
-
-static void shutdown_m32700ut_lcdpld(struct irq_data *data)
-{
-	unsigned long port;
-	unsigned int pldirq;
-
-	pldirq = irq2lcdpldirq(data->irq);
-	port = lcdpldirq2port(pldirq);
-	outw(PLD_ICUCR_ILEVEL7, port);
-}
-
-static struct irq_chip m32700ut_lcdpld_irq_type =
-{
-	.name		= "M32700UT-PLD-LCD-IRQ",
-	.irq_shutdown	= shutdown_m32700ut_lcdpld,
-	.irq_mask	= mask_m32700ut_lcdpld,
-	.irq_unmask	= unmask_m32700ut_lcdpld,
-};
-#endif
-
-void __init init_IRQ(void)
-{
-#if defined(CONFIG_SMC91X)
-	/* INT#0: LAN controller on M32700UT-LAN (SMC91C111)*/
-	irq_set_chip_and_handler(M32700UT_LAN_IRQ_LAN,
-				 &m32700ut_lanpld_irq_type, handle_level_irq);
-	lanpld_icu_data[irq2lanpldirq(M32700UT_LAN_IRQ_LAN)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02;	/* "H" edge sense */
-	disable_m32700ut_lanpld_irq(M32700UT_LAN_IRQ_LAN);
-#endif  /* CONFIG_SMC91X */
-
-	/* MFT2 : system timer */
-	irq_set_chip_and_handler(M32R_IRQ_MFT2, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
-	disable_m32700ut_irq(M32R_IRQ_MFT2);
-
-	/* SIO0 : receive */
-	irq_set_chip_and_handler(M32R_IRQ_SIO0_R, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_SIO0_R].icucr = 0;
-	disable_m32700ut_irq(M32R_IRQ_SIO0_R);
-
-	/* SIO0 : send */
-	irq_set_chip_and_handler(M32R_IRQ_SIO0_S, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_SIO0_S].icucr = 0;
-	disable_m32700ut_irq(M32R_IRQ_SIO0_S);
-
-	/* SIO1 : receive */
-	irq_set_chip_and_handler(M32R_IRQ_SIO1_R, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_SIO1_R].icucr = 0;
-	disable_m32700ut_irq(M32R_IRQ_SIO1_R);
-
-	/* SIO1 : send */
-	irq_set_chip_and_handler(M32R_IRQ_SIO1_S, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_SIO1_S].icucr = 0;
-	disable_m32700ut_irq(M32R_IRQ_SIO1_S);
-
-	/* DMA1 : */
-	irq_set_chip_and_handler(M32R_IRQ_DMA1, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_DMA1].icucr = 0;
-	disable_m32700ut_irq(M32R_IRQ_DMA1);
-
-#ifdef CONFIG_SERIAL_M32R_PLDSIO
-	/* INT#1: SIO0 Receive on PLD */
-	irq_set_chip_and_handler(PLD_IRQ_SIO0_RCV, &m32700ut_pld_irq_type,
-				 handle_level_irq);
-	pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_RCV)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03;
-	disable_m32700ut_pld_irq(PLD_IRQ_SIO0_RCV);
-
-	/* INT#1: SIO0 Send on PLD */
-	irq_set_chip_and_handler(PLD_IRQ_SIO0_SND, &m32700ut_pld_irq_type,
-				 handle_level_irq);
-	pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_SND)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03;
-	disable_m32700ut_pld_irq(PLD_IRQ_SIO0_SND);
-#endif  /* CONFIG_SERIAL_M32R_PLDSIO */
-
-	/* INT#1: CFC IREQ on PLD */
-	irq_set_chip_and_handler(PLD_IRQ_CFIREQ, &m32700ut_pld_irq_type,
-				 handle_level_irq);
-	pld_icu_data[irq2pldirq(PLD_IRQ_CFIREQ)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01;	/* 'L' level sense */
-	disable_m32700ut_pld_irq(PLD_IRQ_CFIREQ);
-
-	/* INT#1: CFC Insert on PLD */
-	irq_set_chip_and_handler(PLD_IRQ_CFC_INSERT, &m32700ut_pld_irq_type,
-				 handle_level_irq);
-	pld_icu_data[irq2pldirq(PLD_IRQ_CFC_INSERT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD00;	/* 'L' edge sense */
-	disable_m32700ut_pld_irq(PLD_IRQ_CFC_INSERT);
-
-	/* INT#1: CFC Eject on PLD */
-	irq_set_chip_and_handler(PLD_IRQ_CFC_EJECT, &m32700ut_pld_irq_type,
-				 handle_level_irq);
-	pld_icu_data[irq2pldirq(PLD_IRQ_CFC_EJECT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02;	/* 'H' edge sense */
-	disable_m32700ut_pld_irq(PLD_IRQ_CFC_EJECT);
-
-	/*
-	 * INT0# is used for LAN, DIO
-	 * We enable it here.
-	 */
-	icu_data[M32R_IRQ_INT0].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11;
-	enable_m32700ut_irq(M32R_IRQ_INT0);
-
-	/*
-	 * INT1# is used for UART, MMC, CF Controller in FPGA.
-	 * We enable it here.
-	 */
-	icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD11;
-	enable_m32700ut_irq(M32R_IRQ_INT1);
-
-#if defined(CONFIG_USB)
-	outw(USBCR_OTGS, USBCR); 	/* USBCR: non-OTG */
-	irq_set_chip_and_handler(M32700UT_LCD_IRQ_USB_INT1,
-				 &m32700ut_lcdpld_irq_type, handle_level_irq);
-
-	lcdpld_icu_data[irq2lcdpldirq(M32700UT_LCD_IRQ_USB_INT1)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01;	/* "L" level sense */
-	disable_m32700ut_lcdpld_irq(M32700UT_LCD_IRQ_USB_INT1);
-#endif
-	/*
-	 * INT2# is used for BAT, USB, AUDIO
-	 * We enable it here.
-	 */
-	icu_data[M32R_IRQ_INT2].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD01;
-	enable_m32700ut_irq(M32R_IRQ_INT2);
-
-#if defined(CONFIG_VIDEO_M32R_AR)
-	/*
-	 * INT3# is used for AR
-	 */
-	irq_set_chip_and_handler(M32R_IRQ_INT3, &m32700ut_irq_type,
-				 handle_level_irq);
-	icu_data[M32R_IRQ_INT3].icucr = M32R_ICUCR_IEN|M32R_ICUCR_ISMOD10;
-	disable_m32700ut_irq(M32R_IRQ_INT3);
-#endif	/* CONFIG_VIDEO_M32R_AR */
-}
-
-#if defined(CONFIG_SMC91X)
-
-#define LAN_IOSTART     0x300
-#define LAN_IOEND       0x320
-static struct resource smc91x_resources[] = {
-	[0] = {
-		.start  = (LAN_IOSTART),
-		.end    = (LAN_IOEND),
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = M32700UT_LAN_IRQ_LAN,
-		.end    = M32700UT_LAN_IRQ_LAN,
-		.flags  = IORESOURCE_IRQ,
-	}
-};
-
-static struct platform_device smc91x_device = {
-	.name		= "smc91x",
-	.id		= 0,
-	.num_resources  = ARRAY_SIZE(smc91x_resources),
-	.resource       = smc91x_resources,
-};
-#endif
-
-#if defined(CONFIG_FB_S1D13XXX)
-
-#include <video/s1d13xxxfb.h>
-#include <asm/s1d13806.h>
-
-static struct s1d13xxxfb_pdata s1d13xxxfb_data = {
-	.initregs		= s1d13xxxfb_initregs,
-	.initregssize		= ARRAY_SIZE(s1d13xxxfb_initregs),
-	.platform_init_video	= NULL,
-#ifdef CONFIG_PM
-	.platform_suspend_video	= NULL,
-	.platform_resume_video	= NULL,
-#endif
-};
-
-static struct resource s1d13xxxfb_resources[] = {
-	[0] = {
-		.start  = 0x10600000UL,
-		.end    = 0x1073FFFFUL,
-		.flags  = IORESOURCE_MEM,
-	},
-	[1] = {
-		.start  = 0x10400000UL,
-		.end    = 0x104001FFUL,
-		.flags  = IORESOURCE_MEM,
-	}
-};
-
-static struct platform_device s1d13xxxfb_device = {
-	.name		= S1D_DEVICENAME,
-	.id		= 0,
-	.dev            = {
-		.platform_data  = &s1d13xxxfb_data,
-	},
-	.num_resources  = ARRAY_SIZE(s1d13xxxfb_resources),
-	.resource       = s1d13xxxfb_resources,
-};
-#endif
-
-static int __init platform_init(void)
-{
-#if defined(CONFIG_SMC91X)
-	platform_device_register(&smc91x_device);
-#endif
-#if defined(CONFIG_FB_S1D13XXX)
-	platform_device_register(&s1d13xxxfb_device);
-#endif
-	return 0;
-}
-arch_initcall(platform_init);