clk: sunxi-ng: Convert early providers to platform drivers

The PRCM CCU drivers depend on clocks provided by other CCU drivers. For
example, the sun8i-r-ccu driver uses the "pll-periph" clock provided by
the SoC's main CCU.

However, sun8i-r-ccu is an early OF clock provider, and many of the
main CCUs (e.g. sun50i-a64-ccu) use platform drivers. This means that
the consumer clocks will be orphaned until the supplier driver is bound.
This can be avoided by converting the remaining CCUs to use platform
drivers. Then fw_devlink will ensure the drivers are bound in the
optimal order.

The sun5i CCU is the only one which actually needs to be an early clock
provider, because it provides the clock for the system timer. That one
is left alone.

Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20211119033338.25486-4-samuel@sholland.org

1 files changed, 30 insertions, 10 deletions

diff --git a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
index 8f65cd03f5ac..d12878a1ba9e 100644
--- a/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
+++ b/drivers/clk/sunxi-ng/ccu-sun8i-a33.c
@@ -5,7 +5,8 @@
 
 #include <linux/clk-provider.h>
 #include <linux/io.h>
-#include <linux/of_address.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
 
 #include "ccu_common.h"
 #include "ccu_reset.h"
@@ -784,16 +785,15 @@ static struct ccu_mux_nb sun8i_a33_cpu_nb = {
 	.bypass_index	= 1, /* index of 24 MHz oscillator */
 };
 
-static void __init sun8i_a33_ccu_setup(struct device_node *node)
+static int sun8i_a33_ccu_probe(struct platform_device *pdev)
 {
 	void __iomem *reg;
+	int ret;
 	u32 val;
 
-	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
-	if (IS_ERR(reg)) {
-		pr_err("%pOF: Could not map the clock registers\n", node);
-		return;
-	}
+	reg = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(reg))
+		return PTR_ERR(reg);
 
 	/* Force the PLL-Audio-1x divider to 1 */
 	val = readl(reg + SUN8I_A33_PLL_AUDIO_REG);
@@ -805,7 +805,9 @@ static void __init sun8i_a33_ccu_setup(struct device_node *node)
 	val &= ~BIT(16);
 	writel(val, reg + SUN8I_A33_PLL_MIPI_REG);
 
-	of_sunxi_ccu_probe(node, reg, &sun8i_a33_ccu_desc);
+	ret = devm_sunxi_ccu_probe(&pdev->dev, reg, &sun8i_a33_ccu_desc);
+	if (ret)
+		return ret;
 
 	/* Gate then ungate PLL CPU after any rate changes */
 	ccu_pll_notifier_register(&sun8i_a33_pll_cpu_nb);
@@ -813,6 +815,24 @@ static void __init sun8i_a33_ccu_setup(struct device_node *node)
 	/* Reparent CPU during PLL CPU rate changes */
 	ccu_mux_notifier_register(pll_cpux_clk.common.hw.clk,
 				  &sun8i_a33_cpu_nb);
+
+	return 0;
 }
-CLK_OF_DECLARE(sun8i_a33_ccu, "allwinner,sun8i-a33-ccu",
-	       sun8i_a33_ccu_setup);
+
+static const struct of_device_id sun8i_a33_ccu_ids[] = {
+	{ .compatible = "allwinner,sun8i-a33-ccu" },
+	{ }
+};
+
+static struct platform_driver sun8i_a33_ccu_driver = {
+	.probe	= sun8i_a33_ccu_probe,
+	.driver	= {
+		.name			= "sun8i-a33-ccu",
+		.suppress_bind_attrs	= true,
+		.of_match_table		= sun8i_a33_ccu_ids,
+	},
+};
+module_platform_driver(sun8i_a33_ccu_driver);
+
+MODULE_IMPORT_NS(SUNXI_CCU);
+MODULE_LICENSE("GPL");