Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.6 kernel.

  Overall the coolest thing here for me is the nouveau maxwell signed
  firmware support from NVidia, it's taken a long while to extract this
  from them.

  I also wish the ARM vendors just designed one set of display IP, ARM
  display block proliferation is definitely increasing.

  Core:
     - drm_event cleanups
     - Internal API cleanup making mode_fixup optional.
     - Apple GMUX vga switcheroo support.
     - DP AUX testing interface

  Panel:
     - Refactoring of DSI core for use over more transports.

  New driver:
     - ARM hdlcd driver

  i915:
     - FBC/PSR (framebuffer compression, panel self refresh) enabled by default.
     - Ongoing atomic display support work
     - Ongoing runtime PM work
     - Pixel clock limit checks
     - VBT DSI description support
     - GEM fixes
     - GuC firmware scheduler enhancements

  amdkfd:
     - Deferred probing fixes to avoid make file or link ordering.

  amdgpu/radeon:
     - ACP support for i2s audio support.
     - Command Submission/GPU scheduler/GPUVM optimisations
     - Initial GPU reset support for amdgpu

  vmwgfx:
     - Support for DX10 gen mipmaps
     - Pageflipping and other fixes.

  exynos:
     - Exynos5420 SoC support for FIMD
     - Exynos5422 SoC support for MIPI-DSI

  nouveau:
     - GM20x secure boot support - adds acceleration for Maxwell GPUs.
     - GM200 support
     - GM20B clock driver support
     - Power sensors work

  etnaviv:
     - Correctness fixes for GPU cache flushing
     - Better support for i.MX6 systems.

  imx-drm:
     - VBlank IRQ support
     - Fence support
     - OF endpoint support

  msm:
     - HDMI support for 8996 (snapdragon 820)
     - Adreno 430 support
     - Timestamp queries support

  virtio-gpu:
     - Fixes for Android support.

  rockchip:
     - Add support for Innosilicion HDMI

  rcar-du:
     - Support for 4 crtcs
     - R8A7795 support
     - RCar Gen 3 support

  omapdrm:
     - HDMI interlace output support
     - dma-buf import support
     - Refactoring to remove a lot of legacy code.

  tilcdc:
     - Rewrite of pageflipping code
     - dma-buf support
     - pinctrl support

  vc4:
     - HDMI modesetting bug fixes
     - Significant 3D performance improvement.

  fsl-dcu (FreeScale):
     - Lots of fixes

  tegra:
     - Two small fixes

  sti:
     - Atomic support for planes
     - Improved HDMI support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits)
  drm/amdgpu: release_pages requires linux/pagemap.h
  drm/sti: restore mode_fixup callback
  drm/amdgpu/gfx7: add MTYPE definition
  drm/amdgpu: removing BO_VAs shouldn't be interruptible
  drm/amd/powerplay: show uvd/vce power gate enablement for tonga.
  drm/amd/powerplay: show uvd/vce power gate info for fiji
  drm/amdgpu: use sched fence if possible
  drm/amdgpu: move ib.fence to job.fence
  drm/amdgpu: give a fence param to ib_free
  drm/amdgpu: include the right version of gmc header files for iceland
  drm/radeon: fix indentation.
  drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ
  drm/amdgpu: switch back to 32bit hw fences v2
  drm/amdgpu: remove amdgpu_fence_is_signaled
  drm/amdgpu: drop the extra fence range check v2
  drm/amdgpu: signal fences directly in amdgpu_fence_process
  drm/amdgpu: cleanup amdgpu_fence_wait_empty v2
  drm/amdgpu: keep all fences in an RCU protected array v2
  drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring
  drm/amdgpu: RCU protected amd_sched_fence_release
  ...

1 files changed, 54 insertions, 9 deletions

diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index 9ccff3011523..0b42ada338c8 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -225,7 +225,12 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
 		   (aux_clock_divider << DP_AUX_CH_CTL_BIT_CLOCK_2X_SHIFT));
 	}
 
-	drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG, DP_PSR_ENABLE);
+	if (dev_priv->psr.link_standby)
+		drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
+				   DP_PSR_ENABLE | DP_PSR_MAIN_LINK_ACTIVE);
+	else
+		drm_dp_dpcd_writeb(&intel_dp->aux, DP_PSR_EN_CFG,
+				   DP_PSR_ENABLE);
 }
 
 static void vlv_psr_enable_source(struct intel_dp *intel_dp)
@@ -280,6 +285,9 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp)
 	if (IS_HASWELL(dev))
 		val |= EDP_PSR_MIN_LINK_ENTRY_TIME_8_LINES;
 
+	if (dev_priv->psr.link_standby)
+		val |= EDP_PSR_LINK_STANDBY;
+
 	I915_WRITE(EDP_PSR_CTL, val |
 		   max_sleep_time << EDP_PSR_MAX_SLEEP_TIME_SHIFT |
 		   idle_frames << EDP_PSR_IDLE_FRAME_SHIFT |
@@ -304,8 +312,15 @@ static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
 
 	dev_priv->psr.source_ok = false;
 
-	if (IS_HASWELL(dev) && dig_port->port != PORT_A) {
-		DRM_DEBUG_KMS("HSW ties PSR to DDI A (eDP)\n");
+	/*
+	 * HSW spec explicitly says PSR is tied to port A.
+	 * BDW+ platforms with DDI implementation of PSR have different
+	 * PSR registers per transcoder and we only implement transcoder EDP
+	 * ones. Since by Display design transcoder EDP is tied to port A
+	 * we can safely escape based on the port A.
+	 */
+	if (HAS_DDI(dev) && dig_port->port != PORT_A) {
+		DRM_DEBUG_KMS("PSR condition failed: Port not supported\n");
 		return false;
 	}
 
@@ -314,6 +329,12 @@ static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
 		return false;
 	}
 
+	if ((IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev)) &&
+	    !dev_priv->psr.link_standby) {
+		DRM_ERROR("PSR condition failed: Link off requested but not supported on this platform\n");
+		return false;
+	}
+
 	if (IS_HASWELL(dev) &&
 	    I915_READ(HSW_STEREO_3D_CTL(intel_crtc->config->cpu_transcoder)) &
 		      S3D_ENABLE) {
@@ -327,12 +348,6 @@ static bool intel_psr_match_conditions(struct intel_dp *intel_dp)
 		return false;
 	}
 
-	if (!IS_VALLEYVIEW(dev) && !IS_CHERRYVIEW(dev) &&
-	    ((dev_priv->vbt.psr.full_link) || (dig_port->port != PORT_A))) {
-		DRM_DEBUG_KMS("PSR condition failed: Link Standby requested/needed but not supported on this platform\n");
-		return false;
-	}
-
 	dev_priv->psr.source_ok = true;
 	return true;
 }
@@ -763,6 +778,36 @@ void intel_psr_init(struct drm_device *dev)
 	dev_priv->psr_mmio_base = IS_HASWELL(dev_priv) ?
 		HSW_EDP_PSR_BASE : BDW_EDP_PSR_BASE;
 
+	/* Per platform default */
+	if (i915.enable_psr == -1) {
+		if (IS_HASWELL(dev) || IS_BROADWELL(dev) ||
+		    IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
+			i915.enable_psr = 1;
+		else
+			i915.enable_psr = 0;
+	}
+
+	/* Set link_standby x link_off defaults */
+	if (IS_HASWELL(dev) || IS_BROADWELL(dev))
+		/* HSW and BDW require workarounds that we don't implement. */
+		dev_priv->psr.link_standby = false;
+	else if (IS_VALLEYVIEW(dev) || IS_CHERRYVIEW(dev))
+		/* On VLV and CHV only standby mode is supported. */
+		dev_priv->psr.link_standby = true;
+	else
+		/* For new platforms let's respect VBT back again */
+		dev_priv->psr.link_standby = dev_priv->vbt.psr.full_link;
+
+	/* Override link_standby x link_off defaults */
+	if (i915.enable_psr == 2 && !dev_priv->psr.link_standby) {
+		DRM_DEBUG_KMS("PSR: Forcing link standby\n");
+		dev_priv->psr.link_standby = true;
+	}
+	if (i915.enable_psr == 3 && dev_priv->psr.link_standby) {
+		DRM_DEBUG_KMS("PSR: Forcing main link off\n");
+		dev_priv->psr.link_standby = false;
+	}
+
 	INIT_DELAYED_WORK(&dev_priv->psr.work, intel_psr_work);
 	mutex_init(&dev_priv->psr.lock);
 }