drm/meson: Make DMT timings parameters and pixel clock generic

Remove the modes timings tables for DMT modes and calculate the HW
paremeters from the modes timings.

Switch the DMT modes pixel clock calculation out of the static frequency
list to a generic calculation from a range of possible PLL dividers.

This patch is an intermediate step towards usage of the Common Clock
Framwework for PLL setup, by reworking the code to have common
sel_pll() function called by the CEA (HDMI) freq setup and the generic
DMT frequencies setup, we should be able to simply call clk_set_rate()
on the PLL clock handle in a near future.

The CEA (HDMI) and CVBS modes needs very specific clock paths that CCF will
never be able to determine by itself, so there is still some work to do for
a full handoff to CCF handling the clocks.

This setup permits setting non-CEA modes like :
- 1600x900-60Hz
- 1280x1024-75Hz
- 1280x1024-60Hz
- 1440x900-60Hz
- 1366x768-60Hz
- 1280x800-60Hz
- 1152x864-75Hz
- 1024x768-75Hz
- 1024x768-70Hz
- 1024x768-60Hz
- 832x624-75Hz
- 800x600-75Hz
- 800x600-72Hz
- 800x600-60Hz
- 640x480-75Hz
- 640x480-73Hz
- 640x480-67Hz

Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
[narmstrong: fixed trivial checkpatch issues]
Link: https://patchwork.freedesktop.org/patch/msgid/1531726814-14638-1-git-send-email-narmstrong@baylibre.com

1 files changed, 2 insertions, 1 deletions

diff --git a/drivers/gpu/drm/meson/meson_venc.h b/drivers/gpu/drm/meson/meson_venc.h
index 7c18a36a0dd0..97eaebbfa0c4 100644
--- a/drivers/gpu/drm/meson/meson_venc.h
+++ b/drivers/gpu/drm/meson/meson_venc.h
@@ -58,7 +58,8 @@ struct meson_cvbs_enci_mode {
 };
 
 /* HDMI Clock parameters */
-bool meson_venc_hdmi_supported_mode(const struct drm_display_mode *mode);
+enum drm_mode_status
+meson_venc_hdmi_supported_mode(const struct drm_display_mode *mode);
 bool meson_venc_hdmi_supported_vic(int vic);
 bool meson_venc_hdmi_venc_repeat(int vic);