IB/hfi1: Determine 9B/16B L2 header type based on Address handle

When address handle attributes are initialized, the LIDs are
transformed to be in the 32 bit LID space.
When constructing the header, hfi1 driver will look at the LID
to determine the packet header to be created.

Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Dasaratharaman Chandramouli <dasaratharaman.chandramouli@intel.com>
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>

1 files changed, 92 insertions, 0 deletions

diff --git a/drivers/infiniband/hw/hfi1/hfi.h b/drivers/infiniband/hw/hfi1/hfi.h
index ee19660ca2fa..cec9590870ba 100644
--- a/drivers/infiniband/hw/hfi1/hfi.h
+++ b/drivers/infiniband/hw/hfi1/hfi.h
@@ -70,6 +70,7 @@
 #include <linux/rhashtable.h>
 #include <linux/netdevice.h>
 #include <rdma/rdma_vt.h>
+#include <rdma/opa_addr.h>
 
 #include "chip_registers.h"
 #include "common.h"
@@ -353,6 +354,10 @@ struct hfi1_packet {
 	bool fecn;
 };
 
+/* Packet types */
+#define HFI1_PKT_TYPE_9B  0
+#define HFI1_PKT_TYPE_16B 1
+
 /*
  * OPA 16B Header
  */
@@ -2170,6 +2175,31 @@ int hfi1_tempsense_rd(struct hfi1_devdata *dd, struct hfi1_temp *temp);
 #define DD_DEV_ENTRY(dd)       __string(dev, dev_name(&(dd)->pcidev->dev))
 #define DD_DEV_ASSIGN(dd)      __assign_str(dev, dev_name(&(dd)->pcidev->dev))
 
+static inline void hfi1_update_ah_attr(struct ib_device *ibdev,
+				       struct rdma_ah_attr *attr)
+{
+	struct hfi1_pportdata *ppd;
+	struct hfi1_ibport *ibp;
+	u32 dlid = rdma_ah_get_dlid(attr);
+
+	/*
+	 * Kernel clients may not have setup GRH information
+	 * Set that here.
+	 */
+	ibp = to_iport(ibdev, rdma_ah_get_port_num(attr));
+	ppd = ppd_from_ibp(ibp);
+	if ((((dlid >= be16_to_cpu(IB_MULTICAST_LID_BASE)) ||
+	      (ppd->lid >= be16_to_cpu(IB_MULTICAST_LID_BASE))) &&
+	    (dlid != be32_to_cpu(OPA_LID_PERMISSIVE)) &&
+	    (dlid != be16_to_cpu(IB_LID_PERMISSIVE)) &&
+	    (!(rdma_ah_get_ah_flags(attr) & IB_AH_GRH))) ||
+	    (rdma_ah_get_make_grd(attr))) {
+		rdma_ah_set_ah_flags(attr, IB_AH_GRH);
+		rdma_ah_set_interface_id(attr, OPA_MAKE_ID(dlid));
+		rdma_ah_set_subnet_prefix(attr, ibp->rvp.gid_prefix);
+	}
+}
+
 /*
  * hfi1_check_mcast- Check if the given lid is
  * in the OPA multicast range.
@@ -2223,4 +2253,66 @@ static inline bool hfi1_is_16B_mcast(u32 lid)
 		opa_get_lid(opa_get_mcast_base(OPA_MCAST_NR), 16B)) &&
 		(lid != opa_get_lid(be32_to_cpu(OPA_LID_PERMISSIVE), 16B)));
 }
+
+static inline void hfi1_make_opa_lid(struct rdma_ah_attr *attr)
+{
+	const struct ib_global_route *grh = rdma_ah_read_grh(attr);
+	u32 dlid = rdma_ah_get_dlid(attr);
+
+	/* Modify ah_attr.dlid to be in the 32 bit LID space.
+	 * This is how the address will be laid out:
+	 * Assuming MCAST_NR to be 4,
+	 * 32 bit permissive LID = 0xFFFFFFFF
+	 * Multicast LID range = 0xFFFFFFFE to 0xF0000000
+	 * Unicast LID range = 0xEFFFFFFF to 1
+	 * Invalid LID = 0
+	 */
+	if (ib_is_opa_gid(&grh->dgid))
+		dlid = opa_get_lid_from_gid(&grh->dgid);
+	else if ((dlid >= be16_to_cpu(IB_MULTICAST_LID_BASE)) &&
+		 (dlid != be16_to_cpu(IB_LID_PERMISSIVE)) &&
+		 (dlid != be32_to_cpu(OPA_LID_PERMISSIVE)))
+		dlid = dlid - be16_to_cpu(IB_MULTICAST_LID_BASE) +
+			opa_get_mcast_base(OPA_MCAST_NR);
+	else if (dlid == be16_to_cpu(IB_LID_PERMISSIVE))
+		dlid = be32_to_cpu(OPA_LID_PERMISSIVE);
+
+	rdma_ah_set_dlid(attr, dlid);
+}
+
+static inline u8 hfi1_get_packet_type(u32 lid)
+{
+	/* 9B if lid > 0xF0000000 */
+	if (lid >= opa_get_mcast_base(OPA_MCAST_NR))
+		return HFI1_PKT_TYPE_9B;
+
+	/* 16B if lid > 0xC000 */
+	if (lid >= opa_get_lid(opa_get_mcast_base(OPA_MCAST_NR), 9B))
+		return HFI1_PKT_TYPE_16B;
+
+	return HFI1_PKT_TYPE_9B;
+}
+
+static inline bool hfi1_get_hdr_type(u32 lid, struct rdma_ah_attr *attr)
+{
+	/*
+	 * If there was an incoming 16B packet with permissive
+	 * LIDs, OPA GIDs would have been programmed when those
+	 * packets were received. A 16B packet will have to
+	 * be sent in response to that packet. Return a 16B
+	 * header type if that's the case.
+	 */
+	if (rdma_ah_get_dlid(attr) == be32_to_cpu(OPA_LID_PERMISSIVE))
+		return (ib_is_opa_gid(&rdma_ah_read_grh(attr)->dgid)) ?
+			HFI1_PKT_TYPE_16B : HFI1_PKT_TYPE_9B;
+
+	/*
+	 * Return a 16B header type if either the the destination
+	 * or source lid is extended.
+	 */
+	if (hfi1_get_packet_type(rdma_ah_get_dlid(attr)) == HFI1_PKT_TYPE_16B)
+		return HFI1_PKT_TYPE_16B;
+
+	return hfi1_get_packet_type(lid);
+}
 #endif                          /* _HFI1_KERNEL_H */