Merge tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull PCI updates from Bjorn Helgaas:

 - Fix ASPM link_state teardown on removal (Lukas Wunner)

 - Fix misleading _OSC ASPM message (Sinan Kaya)

 - Make _OSC optional for PCI (Sinan Kaya)

 - Don't initialize ASPM link state when ACPI_FADT_NO_ASPM is set
   (Patrick Talbert)

 - Remove x86 and arm64 node-local allocation for host bridge structures
   (Punit Agrawal)

 - Pay attention to device-specific _PXM node values (Jonathan Cameron)

 - Support new Immediate Readiness bit (Felipe Balbi)

 - Differentiate between pciehp surprise and safe removal (Lukas Wunner)

 - Remove unnecessary pciehp includes (Lukas Wunner)

 - Drop pciehp hotplug_slot_ops wrappers (Lukas Wunner)

 - Tolerate PCIe Slot Presence Detect being hardwired to zero to
   workaround broken hardware, e.g., the Wilocity switch/wireless device
   (Lukas Wunner)

 - Unify pciehp controller & slot structs (Lukas Wunner)

 - Constify hotplug_slot_ops (Lukas Wunner)

 - Drop hotplug_slot_info (Lukas Wunner)

 - Embed hotplug_slot struct into users instead of allocating it
   separately (Lukas Wunner)

 - Initialize PCIe port service drivers directly instead of relying on
   initcall ordering (Keith Busch)

 - Restore PCI config state after a slot reset (Keith Busch)

 - Save/restore DPC config state along with other PCI config state
   (Keith Busch)

 - Reference count devices during AER handling to avoid race issue with
   concurrent hot removal (Keith Busch)

 - If an Upstream Port reports ERR_FATAL, don't try to read the Port's
   config space because it is probably unreachable (Keith Busch)

 - During error handling, use slot-specific reset instead of secondary
   bus reset to avoid link up/down issues on hotplug ports (Keith Busch)

 - Restore previous AER/DPC handling that does not remove and
   re-enumerate devices on ERR_FATAL (Keith Busch)

 - Notify all drivers that may be affected by error recovery resets
   (Keith Busch)

 - Always generate error recovery uevents, even if a driver doesn't have
   error callbacks (Keith Busch)

 - Make PCIe link active reporting detection generic (Keith Busch)

 - Support D3cold in PCIe hierarchies during system sleep and runtime,
   including hotplug and Thunderbolt ports (Mika Westerberg)

 - Handle hpmemsize/hpiosize kernel parameters uniformly, whether slots
   are empty or occupied (Jon Derrick)

 - Remove duplicated include from pci/pcie/err.c and unused variable
   from cpqphp (YueHaibing)

 - Remove driver pci_cleanup_aer_uncorrect_error_status() calls (Oza
   Pawandeep)

 - Uninline PCI bus accessors for better ftracing (Keith Busch)

 - Remove unused AER Root Port .error_resume method (Keith Busch)

 - Use kfifo in AER instead of a local version (Keith Busch)

 - Use threaded IRQ in AER bottom half (Keith Busch)

 - Use managed resources in AER core (Keith Busch)

 - Reuse pcie_port_find_device() for AER injection (Keith Busch)

 - Abstract AER interrupt handling to disconnect error injection (Keith
   Busch)

 - Refactor AER injection callbacks to simplify future improvments
   (Keith Busch)

 - Remove unused Netronome NFP32xx Device IDs (Jakub Kicinski)

 - Use bitmap_zalloc() for dma_alias_mask (Andy Shevchenko)

 - Add switch fall-through annotations (Gustavo A. R. Silva)

 - Remove unused Switchtec quirk variable (Joshua Abraham)

 - Fix pci.c kernel-doc warning (Randy Dunlap)

 - Remove trivial PCI wrappers for DMA APIs (Christoph Hellwig)

 - Add Intel GPU device IDs to spurious interrupt quirk (Bin Meng)

 - Run Switchtec DMA aliasing quirk only on NTB endpoints to avoid
   useless dmesg errors (Logan Gunthorpe)

 - Update Switchtec NTB documentation (Wesley Yung)

 - Remove redundant "default n" from Kconfig (Bartlomiej Zolnierkiewicz)

 - Avoid panic when drivers enable MSI/MSI-X twice (Tonghao Zhang)

 - Add PCI support for peer-to-peer DMA (Logan Gunthorpe)

 - Add sysfs group for PCI peer-to-peer memory statistics (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA scatterlist mapping interface (Logan
   Gunthorpe)

 - Add PCI configfs/sysfs helpers for use by peer-to-peer users (Logan
   Gunthorpe)

 - Add PCI peer-to-peer DMA driver writer's documentation (Logan
   Gunthorpe)

 - Add block layer flag to indicate driver support for PCI peer-to-peer
   DMA (Logan Gunthorpe)

 - Map Infiniband scatterlists for peer-to-peer DMA if they contain P2P
   memory (Logan Gunthorpe)

 - Register nvme-pci CMB buffer as PCI peer-to-peer memory (Logan
   Gunthorpe)

 - Add nvme-pci support for PCI peer-to-peer memory in requests (Logan
   Gunthorpe)

 - Use PCI peer-to-peer memory in nvme (Stephen Bates, Steve Wise,
   Christoph Hellwig, Logan Gunthorpe)

 - Cache VF config space size to optimize enumeration of many VFs
   (KarimAllah Ahmed)

 - Remove unnecessary <linux/pci-ats.h> include (Bjorn Helgaas)

 - Fix VMD AERSID quirk Device ID matching (Jon Derrick)

 - Fix Cadence PHY handling during probe (Alan Douglas)

 - Signal Cadence Endpoint interrupts via AXI region 0 instead of last
   region (Alan Douglas)

 - Write Cadence Endpoint MSI interrupts with 32 bits of data (Alan
   Douglas)

 - Remove redundant controller tests for "device_type == pci" (Rob
   Herring)

 - Document R-Car E3 (R8A77990) bindings (Tho Vu)

 - Add device tree support for R-Car r8a7744 (Biju Das)

 - Drop unused mvebu PCIe capability code (Thomas Petazzoni)

 - Add shared PCI bridge emulation code (Thomas Petazzoni)

 - Convert mvebu to use shared PCI bridge emulation (Thomas Petazzoni)

 - Add aardvark Root Port emulation (Thomas Petazzoni)

 - Support 100MHz/200MHz refclocks for i.MX6 (Lucas Stach)

 - Add initial power management for i.MX7 (Leonard Crestez)

 - Add PME_Turn_Off support for i.MX7 (Leonard Crestez)

 - Fix qcom runtime power management error handling (Bjorn Andersson)

 - Update TI dra7xx unaligned access errata workaround for host mode as
   well as endpoint mode (Vignesh R)

 - Fix kirin section mismatch warning (Nathan Chancellor)

 - Remove iproc PAXC slot check to allow VF support (Jitendra Bhivare)

 - Quirk Keystone K2G to limit MRRS to 256 (Kishon Vijay Abraham I)

 - Update Keystone to use MRRS quirk for host bridge instead of open
   coding (Kishon Vijay Abraham I)

 - Refactor Keystone link establishment (Kishon Vijay Abraham I)

 - Simplify and speed up Keystone link training (Kishon Vijay Abraham I)

 - Remove unused Keystone host_init argument (Kishon Vijay Abraham I)

 - Merge Keystone driver files into one (Kishon Vijay Abraham I)

 - Remove redundant Keystone platform_set_drvdata() (Kishon Vijay
   Abraham I)

 - Rename Keystone functions for uniformity (Kishon Vijay Abraham I)

 - Add Keystone device control module DT binding (Kishon Vijay Abraham
   I)

 - Use SYSCON API to get Keystone control module device IDs (Kishon
   Vijay Abraham I)

 - Clean up Keystone PHY handling (Kishon Vijay Abraham I)

 - Use runtime PM APIs to enable Keystone clock (Kishon Vijay Abraham I)

 - Clean up Keystone config space access checks (Kishon Vijay Abraham I)

 - Get Keystone outbound window count from DT (Kishon Vijay Abraham I)

 - Clean up Keystone outbound window configuration (Kishon Vijay Abraham
   I)

 - Clean up Keystone DBI setup (Kishon Vijay Abraham I)

 - Clean up Keystone ks_pcie_link_up() (Kishon Vijay Abraham I)

 - Fix Keystone IRQ status checking (Kishon Vijay Abraham I)

 - Add debug messages for all Keystone errors (Kishon Vijay Abraham I)

 - Clean up Keystone includes and macros (Kishon Vijay Abraham I)

 - Fix Mediatek unchecked return value from devm_pci_remap_iospace()
   (Gustavo A. R. Silva)

 - Fix Mediatek endpoint/port matching logic (Honghui Zhang)

 - Change Mediatek Root Port Class Code to PCI_CLASS_BRIDGE_PCI (Honghui
   Zhang)

 - Remove redundant Mediatek PM domain check (Honghui Zhang)

 - Convert Mediatek to pci_host_probe() (Honghui Zhang)

 - Fix Mediatek MSI enablement (Honghui Zhang)

 - Add Mediatek system PM support for MT2712 and MT7622 (Honghui Zhang)

 - Add Mediatek loadable module support (Honghui Zhang)

 - Detach VMD resources after stopping root bus to prevent orphan
   resources (Jon Derrick)

 - Convert pcitest build process to that used by other tools (iio, perf,
   etc) (Gustavo Pimentel)

* tag 'pci-v4.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (140 commits)
  PCI/AER: Refactor error injection fallbacks
  PCI/AER: Abstract AER interrupt handling
  PCI/AER: Reuse existing pcie_port_find_device() interface
  PCI/AER: Use managed resource allocations
  PCI: pcie: Remove redundant 'default n' from Kconfig
  PCI: aardvark: Implement emulated root PCI bridge config space
  PCI: mvebu: Convert to PCI emulated bridge config space
  PCI: mvebu: Drop unused PCI express capability code
  PCI: Introduce PCI bridge emulated config space common logic
  PCI: vmd: Detach resources after stopping root bus
  nvmet: Optionally use PCI P2P memory
  nvmet: Introduce helper functions to allocate and free request SGLs
  nvme-pci: Add support for P2P memory in requests
  nvme-pci: Use PCI p2pmem subsystem to manage the CMB
  IB/core: Ensure we map P2P memory correctly in rdma_rw_ctx_[init|destroy]()
  block: Add PCI P2P flag for request queue
  PCI/P2PDMA: Add P2P DMA driver writer's documentation
  docs-rst: Add a new directory for PCI documentation
  PCI/P2PDMA: Introduce configfs/sysfs enable attribute helpers
  PCI/P2PDMA: Add PCI p2pmem DMA mappings to adjust the bus offset
  ...

1 files changed, 68 insertions, 213 deletions

diff --git a/drivers/pci/pcie/err.c b/drivers/pci/pcie/err.c
index 708fd3a0d646..773197a12568 100644
--- a/drivers/pci/pcie/err.c
+++ b/drivers/pci/pcie/err.c
@@ -12,18 +12,12 @@
 
 #include <linux/pci.h>
 #include <linux/module.h>
-#include <linux/pci.h>
 #include <linux/kernel.h>
 #include <linux/errno.h>
 #include <linux/aer.h>
 #include "portdrv.h"
 #include "../pci.h"
 
-struct aer_broadcast_data {
-	enum pci_channel_state state;
-	enum pci_ers_result result;
-};
-
 static pci_ers_result_t merge_result(enum pci_ers_result orig,
 				  enum pci_ers_result new)
 {
@@ -49,66 +43,52 @@ static pci_ers_result_t merge_result(enum pci_ers_result orig,
 	return orig;
 }
 
-static int report_error_detected(struct pci_dev *dev, void *data)
+static int report_error_detected(struct pci_dev *dev,
+				 enum pci_channel_state state,
+				 enum pci_ers_result *result)
 {
 	pci_ers_result_t vote;
 	const struct pci_error_handlers *err_handler;
-	struct aer_broadcast_data *result_data;
-
-	result_data = (struct aer_broadcast_data *) data;
 
 	device_lock(&dev->dev);
-	dev->error_state = result_data->state;
-
-	if (!dev->driver ||
+	if (!pci_dev_set_io_state(dev, state) ||
+		!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->error_detected) {
-		if (result_data->state == pci_channel_io_frozen &&
-			dev->hdr_type != PCI_HEADER_TYPE_BRIDGE) {
-			/*
-			 * In case of fatal recovery, if one of down-
-			 * stream device has no driver. We might be
-			 * unable to recover because a later insmod
-			 * of a driver for this device is unaware of
-			 * its hw state.
-			 */
-			pci_printk(KERN_DEBUG, dev, "device has %s\n",
-				   dev->driver ?
-				   "no AER-aware driver" : "no driver");
-		}
-
 		/*
-		 * If there's any device in the subtree that does not
-		 * have an error_detected callback, returning
-		 * PCI_ERS_RESULT_NO_AER_DRIVER prevents calling of
-		 * the subsequent mmio_enabled/slot_reset/resume
-		 * callbacks of "any" device in the subtree. All the
-		 * devices in the subtree are left in the error state
-		 * without recovery.
+		 * If any device in the subtree does not have an error_detected
+		 * callback, PCI_ERS_RESULT_NO_AER_DRIVER prevents subsequent
+		 * error callbacks of "any" device in the subtree, and will
+		 * exit in the disconnected error state.
 		 */
-
 		if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE)
 			vote = PCI_ERS_RESULT_NO_AER_DRIVER;
 		else
 			vote = PCI_ERS_RESULT_NONE;
 	} else {
 		err_handler = dev->driver->err_handler;
-		vote = err_handler->error_detected(dev, result_data->state);
-		pci_uevent_ers(dev, PCI_ERS_RESULT_NONE);
+		vote = err_handler->error_detected(dev, state);
 	}
-
-	result_data->result = merge_result(result_data->result, vote);
+	pci_uevent_ers(dev, vote);
+	*result = merge_result(*result, vote);
 	device_unlock(&dev->dev);
 	return 0;
 }
 
+static int report_frozen_detected(struct pci_dev *dev, void *data)
+{
+	return report_error_detected(dev, pci_channel_io_frozen, data);
+}
+
+static int report_normal_detected(struct pci_dev *dev, void *data)
+{
+	return report_error_detected(dev, pci_channel_io_normal, data);
+}
+
 static int report_mmio_enabled(struct pci_dev *dev, void *data)
 {
-	pci_ers_result_t vote;
+	pci_ers_result_t vote, *result = data;
 	const struct pci_error_handlers *err_handler;
-	struct aer_broadcast_data *result_data;
-
-	result_data = (struct aer_broadcast_data *) data;
 
 	device_lock(&dev->dev);
 	if (!dev->driver ||
@@ -118,7 +98,7 @@ static int report_mmio_enabled(struct pci_dev *dev, void *data)
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->mmio_enabled(dev);
-	result_data->result = merge_result(result_data->result, vote);
+	*result = merge_result(*result, vote);
 out:
 	device_unlock(&dev->dev);
 	return 0;
@@ -126,11 +106,8 @@ out:
 
 static int report_slot_reset(struct pci_dev *dev, void *data)
 {
-	pci_ers_result_t vote;
+	pci_ers_result_t vote, *result = data;
 	const struct pci_error_handlers *err_handler;
-	struct aer_broadcast_data *result_data;
-
-	result_data = (struct aer_broadcast_data *) data;
 
 	device_lock(&dev->dev);
 	if (!dev->driver ||
@@ -140,7 +117,7 @@ static int report_slot_reset(struct pci_dev *dev, void *data)
 
 	err_handler = dev->driver->err_handler;
 	vote = err_handler->slot_reset(dev);
-	result_data->result = merge_result(result_data->result, vote);
+	*result = merge_result(*result, vote);
 out:
 	device_unlock(&dev->dev);
 	return 0;
@@ -151,17 +128,16 @@ static int report_resume(struct pci_dev *dev, void *data)
 	const struct pci_error_handlers *err_handler;
 
 	device_lock(&dev->dev);
-	dev->error_state = pci_channel_io_normal;
-
-	if (!dev->driver ||
+	if (!pci_dev_set_io_state(dev, pci_channel_io_normal) ||
+		!dev->driver ||
 		!dev->driver->err_handler ||
 		!dev->driver->err_handler->resume)
 		goto out;
 
 	err_handler = dev->driver->err_handler;
 	err_handler->resume(dev);
-	pci_uevent_ers(dev, PCI_ERS_RESULT_RECOVERED);
 out:
+	pci_uevent_ers(dev, PCI_ERS_RESULT_RECOVERED);
 	device_unlock(&dev->dev);
 	return 0;
 }
@@ -177,207 +153,86 @@ static pci_ers_result_t default_reset_link(struct pci_dev *dev)
 {
 	int rc;
 
-	rc = pci_bridge_secondary_bus_reset(dev);
+	rc = pci_bus_error_reset(dev);
 	pci_printk(KERN_DEBUG, dev, "downstream link has been reset\n");
 	return rc ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
 }
 
 static pci_ers_result_t reset_link(struct pci_dev *dev, u32 service)
 {
-	struct pci_dev *udev;
 	pci_ers_result_t status;
 	struct pcie_port_service_driver *driver = NULL;
 
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		/* Reset this port for all subordinates */
-		udev = dev;
-	} else {
-		/* Reset the upstream component (likely downstream port) */
-		udev = dev->bus->self;
-	}
-
-	/* Use the aer driver of the component firstly */
-	driver = pcie_port_find_service(udev, service);
-
+	driver = pcie_port_find_service(dev, service);
 	if (driver && driver->reset_link) {
-		status = driver->reset_link(udev);
-	} else if (udev->has_secondary_link) {
-		status = default_reset_link(udev);
+		status = driver->reset_link(dev);
+	} else if (dev->has_secondary_link) {
+		status = default_reset_link(dev);
 	} else {
 		pci_printk(KERN_DEBUG, dev, "no link-reset support at upstream device %s\n",
-			pci_name(udev));
+			pci_name(dev));
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
 	if (status != PCI_ERS_RESULT_RECOVERED) {
 		pci_printk(KERN_DEBUG, dev, "link reset at upstream device %s failed\n",
-			pci_name(udev));
+			pci_name(dev));
 		return PCI_ERS_RESULT_DISCONNECT;
 	}
 
 	return status;
 }
 
-/**
- * broadcast_error_message - handle message broadcast to downstream drivers
- * @dev: pointer to from where in a hierarchy message is broadcasted down
- * @state: error state
- * @error_mesg: message to print
- * @cb: callback to be broadcasted
- *
- * Invoked during error recovery process. Once being invoked, the content
- * of error severity will be broadcasted to all downstream drivers in a
- * hierarchy in question.
- */
-static pci_ers_result_t broadcast_error_message(struct pci_dev *dev,
-	enum pci_channel_state state,
-	char *error_mesg,
-	int (*cb)(struct pci_dev *, void *))
-{
-	struct aer_broadcast_data result_data;
-
-	pci_printk(KERN_DEBUG, dev, "broadcast %s message\n", error_mesg);
-	result_data.state = state;
-	if (cb == report_error_detected)
-		result_data.result = PCI_ERS_RESULT_CAN_RECOVER;
-	else
-		result_data.result = PCI_ERS_RESULT_RECOVERED;
-
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
-		/*
-		 * If the error is reported by a bridge, we think this error
-		 * is related to the downstream link of the bridge, so we
-		 * do error recovery on all subordinates of the bridge instead
-		 * of the bridge and clear the error status of the bridge.
-		 */
-		if (cb == report_error_detected)
-			dev->error_state = state;
-		pci_walk_bus(dev->subordinate, cb, &result_data);
-		if (cb == report_resume) {
-			pci_aer_clear_device_status(dev);
-			pci_cleanup_aer_uncorrect_error_status(dev);
-			dev->error_state = pci_channel_io_normal;
-		}
-	} else {
-		/*
-		 * If the error is reported by an end point, we think this
-		 * error is related to the upstream link of the end point.
-		 * The error is non fatal so the bus is ok; just invoke
-		 * the callback for the function that logged the error.
-		 */
-		cb(dev, &result_data);
-	}
-
-	return result_data.result;
-}
-
-/**
- * pcie_do_fatal_recovery - handle fatal error recovery process
- * @dev: pointer to a pci_dev data structure of agent detecting an error
- *
- * Invoked when an error is fatal. Once being invoked, removes the devices
- * beneath this AER agent, followed by reset link e.g. secondary bus reset
- * followed by re-enumeration of devices.
- */
-void pcie_do_fatal_recovery(struct pci_dev *dev, u32 service)
+void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state,
+		      u32 service)
 {
-	struct pci_dev *udev;
-	struct pci_bus *parent;
-	struct pci_dev *pdev, *temp;
-	pci_ers_result_t result;
-
-	if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)
-		udev = dev;
+	pci_ers_result_t status = PCI_ERS_RESULT_CAN_RECOVER;
+	struct pci_bus *bus;
+
+	/*
+	 * Error recovery runs on all subordinates of the first downstream port.
+	 * If the downstream port detected the error, it is cleared at the end.
+	 */
+	if (!(pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT ||
+	      pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM))
+		dev = dev->bus->self;
+	bus = dev->subordinate;
+
+	pci_dbg(dev, "broadcast error_detected message\n");
+	if (state == pci_channel_io_frozen)
+		pci_walk_bus(bus, report_frozen_detected, &status);
 	else
-		udev = dev->bus->self;
-
-	parent = udev->subordinate;
-	pci_lock_rescan_remove();
-	pci_dev_get(dev);
-	list_for_each_entry_safe_reverse(pdev, temp, &parent->devices,
-					 bus_list) {
-		pci_dev_get(pdev);
-		pci_dev_set_disconnected(pdev, NULL);
-		if (pci_has_subordinate(pdev))
-			pci_walk_bus(pdev->subordinate,
-				     pci_dev_set_disconnected, NULL);
-		pci_stop_and_remove_bus_device(pdev);
-		pci_dev_put(pdev);
-	}
-
-	result = reset_link(udev, service);
+		pci_walk_bus(bus, report_normal_detected, &status);
 
-	if ((service == PCIE_PORT_SERVICE_AER) &&
-	    (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
-		/*
-		 * If the error is reported by a bridge, we think this error
-		 * is related to the downstream link of the bridge, so we
-		 * do error recovery on all subordinates of the bridge instead
-		 * of the bridge and clear the error status of the bridge.
-		 */
-		pci_aer_clear_fatal_status(dev);
-		pci_aer_clear_device_status(dev);
-	}
+	if (state == pci_channel_io_frozen &&
+	    reset_link(dev, service) != PCI_ERS_RESULT_RECOVERED)
+		goto failed;
 
-	if (result == PCI_ERS_RESULT_RECOVERED) {
-		if (pcie_wait_for_link(udev, true))
-			pci_rescan_bus(udev->bus);
-		pci_info(dev, "Device recovery from fatal error successful\n");
-	} else {
-		pci_uevent_ers(dev, PCI_ERS_RESULT_DISCONNECT);
-		pci_info(dev, "Device recovery from fatal error failed\n");
+	if (status == PCI_ERS_RESULT_CAN_RECOVER) {
+		status = PCI_ERS_RESULT_RECOVERED;
+		pci_dbg(dev, "broadcast mmio_enabled message\n");
+		pci_walk_bus(bus, report_mmio_enabled, &status);
 	}
 
-	pci_dev_put(dev);
-	pci_unlock_rescan_remove();
-}
-
-/**
- * pcie_do_nonfatal_recovery - handle nonfatal error recovery process
- * @dev: pointer to a pci_dev data structure of agent detecting an error
- *
- * Invoked when an error is nonfatal/fatal. Once being invoked, broadcast
- * error detected message to all downstream drivers within a hierarchy in
- * question and return the returned code.
- */
-void pcie_do_nonfatal_recovery(struct pci_dev *dev)
-{
-	pci_ers_result_t status;
-	enum pci_channel_state state;
-
-	state = pci_channel_io_normal;
-
-	status = broadcast_error_message(dev,
-			state,
-			"error_detected",
-			report_error_detected);
-
-	if (status == PCI_ERS_RESULT_CAN_RECOVER)
-		status = broadcast_error_message(dev,
-				state,
-				"mmio_enabled",
-				report_mmio_enabled);
-
 	if (status == PCI_ERS_RESULT_NEED_RESET) {
 		/*
 		 * TODO: Should call platform-specific
 		 * functions to reset slot before calling
 		 * drivers' slot_reset callbacks?
 		 */
-		status = broadcast_error_message(dev,
-				state,
-				"slot_reset",
-				report_slot_reset);
+		status = PCI_ERS_RESULT_RECOVERED;
+		pci_dbg(dev, "broadcast slot_reset message\n");
+		pci_walk_bus(bus, report_slot_reset, &status);
 	}
 
 	if (status != PCI_ERS_RESULT_RECOVERED)
 		goto failed;
 
-	broadcast_error_message(dev,
-				state,
-				"resume",
-				report_resume);
+	pci_dbg(dev, "broadcast resume message\n");
+	pci_walk_bus(bus, report_resume, &status);
 
+	pci_aer_clear_device_status(dev);
+	pci_cleanup_aer_uncorrect_error_status(dev);
 	pci_info(dev, "AER: Device recovery successful\n");
 	return;