diff options
| author | AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> | 2022-11-11 10:41:06 +0100 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2022-11-14 14:20:41 +0100 |
| commit | e1ff91f9d2303cd4e706cc908bfca21cd17b9927 (patch) | |
| tree | aab9fcb0501757c38550fb478ba42aaa4db7f393 /drivers/pinctrl/mediatek/pinctrl-mt6795.c | |
| parent | 91d5c5060ee24fe8da88cd585bb43b843d2f0dce (diff) | |
| download | linux-e1ff91f9d2303cd4e706cc908bfca21cd17b9927.tar.gz | |
pinctrl: mediatek: Fix EINT pins input debounce time configuration
The External Interrupt Controller (EINTC) on all of the supported
MediaTek SoCs does support input debouncing, but not all of them
index the debounce time values (DBNC_SETTING registers) the same way.
Before this change, in some cases, as an example, requesting a debounce
time of 16 milliseconds would mistakenly set the relative DBNC_SETTING
register to 0x2, resulting in a way shorter debounce time of 500uS.
To fix the aforementioned issue, define three different debounce_time
arrays, reflecting the correct register index for each value and for
each register index variant, and make sure that each SoC pinctrl
driver uses the right one.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221111094106.18486-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'drivers/pinctrl/mediatek/pinctrl-mt6795.c')
| -rw-r--r-- | drivers/pinctrl/mediatek/pinctrl-mt6795.c | 1 |
1 files changed, 1 insertions, 0 deletions
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt6795.c b/drivers/pinctrl/mediatek/pinctrl-mt6795.c index f90152261a0f..01e855ccd4dd 100644 --- a/drivers/pinctrl/mediatek/pinctrl-mt6795.c +++ b/drivers/pinctrl/mediatek/pinctrl-mt6795.c @@ -475,6 +475,7 @@ static const struct mtk_eint_hw mt6795_eint_hw = { .ports = 7, .ap_num = 224, .db_cnt = 32, + .db_time = debounce_time_mt6795, }; static const unsigned int mt6795_pull_type[] = { |