diff options
| -rw-r--r-- | Documentation/devicetree/bindings/vendor-prefixes.txt | 1 | ||||
| -rw-r--r-- | arch/arm/boot/dts/Makefile | 3 | ||||
| -rw-r--r-- | arch/arm/boot/dts/aspeed-ast2500-evb.dts | 18 | ||||
| -rw-r--r-- | arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts | 129 | ||||
| -rw-r--r-- | arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts | 325 | ||||
| -rw-r--r-- | arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts | 6 | ||||
| -rw-r--r-- | arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts | 32 | ||||
| -rw-r--r-- | arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts | 6 | ||||
| -rw-r--r-- | arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts | 159 | ||||
| -rw-r--r-- | arch/arm/boot/dts/aspeed-g4.dtsi | 35 | ||||
| -rw-r--r-- | arch/arm/boot/dts/aspeed-g5.dtsi | 47 |
11 files changed, 761 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index cd93661954e6..883d72dc9027 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -280,6 +280,7 @@ pine64 Pine64 pixcir PIXCIR MICROELECTRONICS Co., Ltd plathome Plat'Home Co., Ltd. plda PLDA +portwell Portwell Inc. poslab Poslab Technology Co., Ltd. powervr PowerVR (deprecated, use img) probox2 PROBOX2 (by W2COMP Co., Ltd.) diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 99e641b3e436..48897a569219 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -1170,8 +1170,11 @@ dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb dtb-$(CONFIG_ARCH_ASPEED) += \ aspeed-ast2500-evb.dtb \ aspeed-bmc-arm-centriq2400-rep.dtb \ + aspeed-bmc-intel-s2600wf.dtb \ + aspeed-bmc-opp-lanyang.dtb \ aspeed-bmc-opp-palmetto.dtb \ aspeed-bmc-opp-romulus.dtb \ aspeed-bmc-opp-witherspoon.dtb \ aspeed-bmc-opp-zaius.dtb \ + aspeed-bmc-portwell-neptune.dtb \ aspeed-bmc-quanta-q71l.dtb diff --git a/arch/arm/boot/dts/aspeed-ast2500-evb.dts b/arch/arm/boot/dts/aspeed-ast2500-evb.dts index 91a36c1f029b..ede11c597673 100644 --- a/arch/arm/boot/dts/aspeed-ast2500-evb.dts +++ b/arch/arm/boot/dts/aspeed-ast2500-evb.dts @@ -79,3 +79,21 @@ reg = <0x4d>; }; }; + +&ehci0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2ah_default>; +}; + +&ehci1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb2bh_default>; +}; + +&uhci { + status = "okay"; + + /* No pinctrl, this follows the above EHCI settings */ +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts new file mode 100644 index 000000000000..7a291de02543 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-intel-s2600wf.dts @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2017 Intel Corporation +/dts-v1/; + +#include "aspeed-g5.dtsi" + +/ { + model = "S2600WF BMC"; + compatible = "intel,s2600wf-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "earlyprintk"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + vga_memory: framebuffer@7f000000 { + no-map; + reg = <0x7f000000 0x01000000>; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>; + }; + +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c13 { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default + &pinctrl_pwm4_default &pinctrl_pwm5_default + &pinctrl_pwm6_default &pinctrl_pwm7_default>; +}; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts new file mode 100644 index 000000000000..d598b6391362 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-opp-lanyang.dts @@ -0,0 +1,325 @@ +// SPDX-License-Identifier: GPL-2.0+ +// Copyright (c) 2018 Inventec Corporation +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Lanyang BMC"; + compatible = "inventec,lanyang-bmc", "aspeed,ast2500"; + + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + flash_memory: region@98000000 { + no-map; + reg = <0x98000000 0x04000000>; /* 64M */ + }; + }; + + leds { + compatible = "gpio-leds"; + + sys_boot_status { + label = "System_boot_status"; + gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>; + }; + + attention { + label = "Attention_locator"; + gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>; + }; + + plt_fault { + label = "Platform_fault"; + gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>; + }; + + hdd_fault { + label = "Onboard_drive_fault"; + gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>; + }; + bmc_err { + lable = "BMC_fault"; + gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>; + }; + + sys_err { + lable = "Sys_fault"; + gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>; + }; + }; + + fsi: gpio-fsi { + compatible = "fsi-master-gpio", "fsi-master"; + #address-cells = <2>; + #size-cells = <0>; + + clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>; + data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>; + trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>; + enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>; + mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, + <&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>, + <&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>, + <&adc 13>, <&adc 14>, <&adc 15>; + }; + + iio-hwmon-battery { + compatible = "iio-hwmon"; + io-channels = <&adc 12>; + }; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default + &pinctrl_pwm2_default &pinctrl_pwm3_default>; + + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x01>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; + + fan@2 { + reg = <0x02>; + aspeed,fan-tach-ch = /bits/ 8 <0x02>; + }; + + fan@3 { + reg = <0x03>; + aspeed,fan-tach-ch = /bits/ 8 <0x03>; + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "bmc"; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + + flash@0 { + status = "okay"; + label = "pnor"; + m25p,fast-read; + }; +}; + +&spi2 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi2ck_default + &pinctrl_spi2cs0_default + &pinctrl_spi2cs1_default + &pinctrl_spi2miso_default + &pinctrl_spi2mosi_default>; + + flash@0 { + status = "okay"; + }; +}; + +&uart1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&lpc_ctrl { + status = "okay"; + memory-region = <&flash_memory>; + flash = <&spi1>; +}; + +&lpc_snoop { + status = "okay"; + snoop-ports = <0x80>; +}; + +&uart5 { + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default>; + use-ncsi; +}; + +&mac1 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>; +}; + +&i2c0 { + status = "okay"; + + eeprom@55 { + compatible = "atmel,24c64"; + reg = <0x55>; + pagesize = <32>; + }; + + rtc@68 { + compatible = "nxp,pcf8523"; + reg = <0x68>; + }; + + tmp75@48 { + compatible = "ti,tmp75"; + reg = <0x48>; + }; +}; + +&i2c1 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + +&i2c3 { + status = "okay"; +}; + +&i2c4 { + status = "okay"; +}; + +&i2c5 { + status = "okay"; +}; + +&i2c6 { + status = "okay"; +}; + +&i2c7 { + status = "okay"; +}; + +&i2c8 { + status = "okay"; +}; + +&i2c9 { + status = "okay"; +}; + +&i2c10 { + status = "okay"; +}; + +&i2c11 { + status = "okay"; +}; + +&vuart { + status = "okay"; +}; + +&gfx { + status = "okay"; +}; + +&pinctrl { + aspeed,external-nodes = <&gfx &lhc>; +}; + +&gpio { + pin_gpio_b0 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_HDD1_PWR_EN"; + }; + + pin_gpio_b5 { + gpio-hog; + gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + input; + line-name = "BMC_USB1_OCI2"; + }; + + pin_gpio_h5 { + gpio-hog; + gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_CP0_PERST_ENABLE_R"; + }; + + pin_gpio_z2 { + gpio-hog; + gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "RST_PCA9546_U177_N"; + }; + + pin_gpio_aa6 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_CP0_RESET_N"; + }; + + pin_gpio_aa7 { + gpio-hog; + gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>; + output-high; + line-name = "BMC_TPM_RESET_N"; + }; + + pin_gpio_ab0 { + gpio-hog; + gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>; + output-high; + line-name = "BMC_USB_PWRON_N"; + }; +}; + +&ibt { + status = "okay"; +}; + +&adc { + status = "okay"; +}; + diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts index 51bc6a2e9dd5..389f5f83bef9 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-romulus.dts @@ -68,6 +68,12 @@ gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(J, 2)>; }; + + id-button { + label = "id-button"; + gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(Q, 7)>; + }; }; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts index 7056231cbee6..78a511e6e482 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-witherspoon.dts @@ -28,6 +28,34 @@ }; }; + gpio-keys { + compatible = "gpio-keys"; + + air-water { + label = "air-water"; + gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(B, 5)>; + }; + + checkstop { + label = "checkstop"; + gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(J, 2)>; + }; + + ps0-presence { + label = "ps0-presence"; + gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(P, 7)>; + }; + + ps1-presence { + label = "ps1-presence"; + gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(N, 0)>; + }; + }; + gpio-keys-polled { compatible = "gpio-keys-polled"; #address-cells = <1>; @@ -547,6 +575,10 @@ pinctrl-0 = <&pinctrl_wdtrst1_default>; }; +&wdt2 { + aspeed,alt-boot; +}; + &ibt { status = "okay"; }; diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts index ebe726a0d311..ccbf645ab84d 100644 --- a/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts +++ b/arch/arm/boot/dts/aspeed-bmc-opp-zaius.dts @@ -55,6 +55,12 @@ gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>; linux,code = <ASPEED_GPIO(F, 7)>; }; + + pcie-e2b-present{ + label = "pcie-e2b-present"; + gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>; + linux,code = <ASPEED_GPIO(E, 7)>; + }; }; leds { diff --git a/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts new file mode 100644 index 000000000000..43ed13963d35 --- /dev/null +++ b/arch/arm/boot/dts/aspeed-bmc-portwell-neptune.dts @@ -0,0 +1,159 @@ +// SPDX-License-Identifier: GPL-2.0 +// Copyright (c) 2017 Facebook Inc. +/dts-v1/; + +#include "aspeed-g5.dtsi" +#include <dt-bindings/gpio/aspeed-gpio.h> + +/ { + model = "Portwell Neptune BMC"; + compatible = "portwell,neptune-bmc", "aspeed,ast2500"; + aliases { + serial0 = &uart1; + serial4 = &uart5; + }; + chosen { + stdout-path = &uart5; + bootargs = "console=ttyS4,115200 earlyprintk"; + }; + + memory { + reg = <0x80000000 0x20000000>; + }; + + leds { + compatible = "gpio-leds"; + postcode0 { + label="BMC_UP"; + gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + postcode1 { + label="BMC_HB"; + gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + postcode2 { + label="FAULT"; + gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + }; + // postcode3-7 are GPIOH3-H7 + }; +}; + +&fmc { + status = "okay"; + flash@0 { + status = "okay"; + m25p,fast-read; +#include "openbmc-flash-layout.dtsi" + }; +}; + +&spi1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi1_default>; + flash@0 { + status = "okay"; + m25p,fast-read; + label = "pnor"; + }; +}; + +&uart1 { + // Host Console + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_txd1_default + &pinctrl_rxd1_default>; +}; + +&uart5 { + // BMC Console + status = "okay"; +}; + +&mac0 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii1_default + &pinctrl_mdio1_default>; +}; + +&mac1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rmii2_default>; + use-ncsi; +}; + +&i2c1 { + status = "okay"; + // To PCIe slot SMBUS +}; + +&i2c2 { + status = "okay"; + // To LAN I210 +}; + +&i2c3 { + status = "okay"; + // SMBus to COMe AB +}; + +&i2c4 { + status = "okay"; + // I2C to COMe AB +}; + +&i2c5 { + status = "okay"; +// USB Debug card + pca9555@27 { + compatible = "nxp,pca9555"; + reg = <0x27>; + }; +}; + +&i2c6 { + status = "okay"; + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + }; + tmp421@4e { + compatible = "ti,tmp421"; + reg = <0x4e>; + }; + tmp421@4f { + compatible = "ti,tmp421"; + reg = <0x4f>; + }; +}; + +&i2c8 { + status = "okay"; + eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <32>; + }; +}; + +&pwm_tacho { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>; + fan@0 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x00>; + }; + + fan@1 { + reg = <0x00>; + aspeed,fan-tach-ch = /bits/ 8 <0x01>; + }; +}; diff --git a/arch/arm/boot/dts/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed-g4.dtsi index 518d2bc7c7fc..5e947ed496c2 100644 --- a/arch/arm/boot/dts/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed-g4.dtsi @@ -108,6 +108,23 @@ status = "disabled"; }; + ehci0: usb@1e6a1000 { + compatible = "aspeed,ast2400-ehci", "generic-ehci"; + reg = <0x1e6a1000 0x100>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + status = "disabled"; + }; + + uhci: usb@1e6b0000 { + compatible = "aspeed,ast2400-uhci", "generic-uhci"; + reg = <0x1e6b0000 0x100>; + interrupts = <14>; + #ports = <3>; + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -125,6 +142,14 @@ pinctrl: pinctrl { compatible = "aspeed,g4-pinctrl"; }; + + }; + + rng: hwrng@78 { + compatible = "timeriomem_rng"; + reg = <0x78 0x4>; + period = <1>; + quality = <100>; }; adc: adc@1e6e9000 { @@ -1250,6 +1275,16 @@ groups = "USBCKI"; }; + pinctrl_usb2h_default: usb2h_default { + function = "USB2H1"; + groups = "USB2H1"; + }; + + pinctrl_usb2d_default: usb2d_default { + function = "USB2D1"; + groups = "USB2D1"; + }; + pinctrl_vgabios_rom_default: vgabios_rom_default { function = "VGABIOS_ROM"; groups = "VGABIOS_ROM"; diff --git a/arch/arm/boot/dts/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed-g5.dtsi index f9917717dd08..24eec00c4a95 100644 --- a/arch/arm/boot/dts/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed-g5.dtsi @@ -143,6 +143,31 @@ status = "disabled"; }; + ehci0: usb@1e6a1000 { + compatible = "aspeed,ast2500-ehci", "generic-ehci"; + reg = <0x1e6a1000 0x100>; + interrupts = <5>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>; + status = "disabled"; + }; + + ehci1: usb@1e6a3000 { + compatible = "aspeed,ast2500-ehci", "generic-ehci"; + reg = <0x1e6a3000 0x100>; + interrupts = <13>; + clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>; + status = "disabled"; + }; + + uhci: usb@1e6b0000 { + compatible = "aspeed,ast2500-uhci", "generic-uhci"; + reg = <0x1e6b0000 0x100>; + interrupts = <14>; + #ports = <2>; + clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>; + status = "disabled"; + }; + apb { compatible = "simple-bus"; #address-cells = <1>; @@ -164,6 +189,13 @@ }; }; + rng: hwrng@78 { + compatible = "timeriomem_rng"; + reg = <0x78 0x4>; + period = <1>; + quality = <100>; + }; + gfx: display@1e6e6000 { compatible = "aspeed,ast2500-gfx", "syscon"; reg = <0x1e6e6000 0x1000>; @@ -1380,6 +1412,21 @@ groups = "USBCKI"; }; + pinctrl_usb2ah_default: usb2ah_default { + function = "USB2AH"; + groups = "USB2AH"; + }; + + pinctrl_usb11bhid_default: usb11bhid_default { + function = "USB11BHID"; + groups = "USB11BHID"; + }; + + pinctrl_usb2bh_default: usb2bh_default { + function = "USB2BH"; + groups = "USB2BH"; + }; + pinctrl_vgabiosrom_default: vgabiosrom_default { function = "VGABIOSROM"; groups = "VGABIOSROM"; |