1 files changed, 0 insertions, 57 deletions
diff --git a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt b/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
deleted file mode 100644
index 75598e655067..000000000000
--- a/Documentation/devicetree/bindings/clock/ingenic,cgu.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Ingenic SoC CGU binding
-
-The CGU in an Ingenic SoC provides all the clocks generated on-chip. It
-typically includes a variety of PLLs, multiplexers, dividers & gates in order
-to provide many different clock signals derived from only 2 external source
-clocks.
-
-Required properties:
-- compatible : Should be one of:
-  * ingenic,jz4740-cgu
-  * ingenic,jz4725b-cgu
-  * ingenic,jz4770-cgu
-  * ingenic,jz4780-cgu
-  * ingenic,x1000-cgu
-- reg : The address & length of the CGU registers.
-- clocks : List of phandle & clock specifiers for clocks external to the CGU.
-  Two such external clocks should be specified - first the external crystal
-  "ext" and second the RTC clock source "rtc".
-- clock-names : List of name strings for the external clocks.
-- #clock-cells: Should be 1.
-  Clock consumers specify this argument to identify a clock. The valid values
-  may be found in <dt-bindings/clock/<soctype>-cgu.h>.
-
-Example SoC include file:
-
-/ {
-	cgu: jz4740-cgu {
-		compatible = "ingenic,jz4740-cgu";
-		reg = <0x10000000 0x100>;
-		#clock-cells = <1>;
-	};
-
-	uart0: serial@10030000 {
-		clocks = <&cgu JZ4740_CLK_UART0>;
-	};
-};
-
-Example board file:
-
-/ {
-	ext: clock@0 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <12000000>;
-	};
-
-	rtc: clock@1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-	};
-
-	&cgu {
-		clocks = <&ext> <&rtc>;
-		clock-names: "ext", "rtc";
-	};
-};