diff options
Diffstat (limited to 'Documentation/devicetree')
98 files changed, 5828 insertions, 758 deletions
diff --git a/Documentation/devicetree/bindings/.gitignore b/Documentation/devicetree/bindings/.gitignore index 3a05b99bfa26..a77719968a7e 100644 --- a/Documentation/devicetree/bindings/.gitignore +++ b/Documentation/devicetree/bindings/.gitignore @@ -1,4 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only *.example.dts -processed-schema*.yaml -processed-schema*.json +/processed-schema*.yaml +/processed-schema*.json diff --git a/Documentation/devicetree/bindings/Makefile b/Documentation/devicetree/bindings/Makefile index bc24ee316726..5ccfed90cc70 100644 --- a/Documentation/devicetree/bindings/Makefile +++ b/Documentation/devicetree/bindings/Makefile @@ -48,7 +48,7 @@ define rule_chkdt $(call cmd,mk_schema) endef -DT_DOCS = $(shell $(find_cmd) | sed -e 's|^$(srctree)/||') +DT_DOCS = $(patsubst $(srctree)/%,%,$(shell $(find_cmd))) override DTC_FLAGS := \ -Wno-avoid_unnecessary_addr_size \ diff --git a/Documentation/devicetree/bindings/arm/ete.yaml b/Documentation/devicetree/bindings/arm/ete.yaml new file mode 100644 index 000000000000..7f9b2d1e1147 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ete.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# Copyright 2021, Arm Ltd +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/ete.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ARM Embedded Trace Extensions + +maintainers: + - Suzuki K Poulose <suzuki.poulose@arm.com> + - Mathieu Poirier <mathieu.poirier@linaro.org> + +description: | + Arm Embedded Trace Extension(ETE) is a per CPU trace component that + allows tracing the CPU execution. It overlaps with the CoreSight ETMv4 + architecture and has extended support for future architecture changes. + The trace generated by the ETE could be stored via legacy CoreSight + components (e.g, TMC-ETR) or other means (e.g, using a per CPU buffer + Arm Trace Buffer Extension (TRBE)). Since the ETE can be connected to + legacy CoreSight components, a node must be listed per instance, along + with any optional connection graph as per the coresight bindings. + See bindings/arm/coresight.txt. + +properties: + $nodename: + pattern: "^ete([0-9a-f]+)$" + compatible: + items: + - const: arm,embedded-trace-extension + + cpu: + description: | + Handle to the cpu this ETE is bound to. + $ref: /schemas/types.yaml#/definitions/phandle + + out-ports: + description: | + Output connections from the ETE to legacy CoreSight trace bus. + $ref: /schemas/graph.yaml#/properties/ports + properties: + port: + description: Output connection from the ETE to legacy CoreSight Trace bus. + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - cpu + +additionalProperties: false + +examples: + +# An ETE node without legacy CoreSight connections + - | + ete0 { + compatible = "arm,embedded-trace-extension"; + cpu = <&cpu_0>; + }; +# An ETE node with legacy CoreSight connections + - | + ete1 { + compatible = "arm,embedded-trace-extension"; + cpu = <&cpu_1>; + + out-ports { /* legacy coresight connection */ + port { + ete1_out_port: endpoint { + remote-endpoint = <&funnel_in_port0>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt index a21f7709596c..0705e765f432 100644 --- a/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt +++ b/Documentation/devicetree/bindings/arm/marvell/cp110-system-controller.txt @@ -142,8 +142,8 @@ mpp50 50 gpio, ge1(rxclk), mss_i2c(sda), spi1(csn0), uart2(txd), uart0(rxd), xg( mpp51 51 gpio, ge1(rxd0), mss_i2c(sck), spi1(csn1), uart2(rxd), uart0(cts), sdio(pwr10) mpp52 52 gpio, ge1(rxd1), synce1(clk), synce2(clk), spi1(csn2), uart1(cts), led(clk), pcie(rstoutn), pcie0(clkreq) mpp53 53 gpio, ge1(rxd2), ptp(clk), spi1(csn3), uart1(rxd), led(stb), sdio(led) -mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio(wr_protect) -mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio(card_detect) +mpp54 54 gpio, ge1(rxd3), synce2(clk), ptp(pclk_out), synce1(clk), led(data), sdio(hw_rst), sdio_wp(wr_protect) +mpp55 55 gpio, ge1(rxctl_rxdv), ptp(pulse), sdio(led), sdio_cd(card_detect) mpp56 56 gpio, tdm(drx), au(i2sdo_spdifo), spi0(clk), uart1(rxd), sata1(present_act), sdio(clk) mpp57 57 gpio, mss_i2c(sda), ptp(pclk_out), tdm(intn), au(i2sbclk), spi0(mosi), uart1(txd), sata0(present_act), sdio(cmd) mpp58 58 gpio, mss_i2c(sck), ptp(clk), tdm(rstn), au(i2sdi), spi0(miso), uart1(cts), led(clk), sdio(d0) diff --git a/Documentation/devicetree/bindings/arm/trbe.yaml b/Documentation/devicetree/bindings/arm/trbe.yaml new file mode 100644 index 000000000000..4402d7bfd1fc --- /dev/null +++ b/Documentation/devicetree/bindings/arm/trbe.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: GPL-2.0-only or BSD-2-Clause +# Copyright 2021, Arm Ltd +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/arm/trbe.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: ARM Trace Buffer Extensions + +maintainers: + - Anshuman Khandual <anshuman.khandual@arm.com> + +description: | + Arm Trace Buffer Extension (TRBE) is a per CPU component + for storing trace generated on the CPU to memory. It is + accessed via CPU system registers. The software can verify + if it is permitted to use the component by checking the + TRBIDR register. + +properties: + $nodename: + const: "trbe" + compatible: + items: + - const: arm,trace-buffer-extension + + interrupts: + description: | + Exactly 1 PPI must be listed. For heterogeneous systems where + TRBE is only supported on a subset of the CPUs, please consult + the arm,gic-v3 binding for details on describing a PPI partition. + maxItems: 1 + +required: + - compatible + - interrupts + +additionalProperties: false + +examples: + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + trbe { + compatible = "arm,trace-buffer-extension"; + interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; + }; +... diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml index 57324a5f0271..a1d5a32660e0 100644 --- a/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml +++ b/Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml @@ -109,7 +109,7 @@ required: - resets - ddc -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/renesas,du.yaml b/Documentation/devicetree/bindings/display/renesas,du.yaml index 552a99ce4f12..121596f106da 100644 --- a/Documentation/devicetree/bindings/display/renesas,du.yaml +++ b/Documentation/devicetree/bindings/display/renesas,du.yaml @@ -51,6 +51,9 @@ properties: resets: true reset-names: true + power-domains: + maxItems: 1 + ports: $ref: /schemas/graph.yaml#/properties/port description: | diff --git a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml index 2e66840a78fe..e302147e53c6 100644 --- a/Documentation/devicetree/bindings/dma/qcom,gpi.yaml +++ b/Documentation/devicetree/bindings/dma/qcom,gpi.yaml @@ -20,6 +20,7 @@ properties: compatible: enum: - qcom,sdm845-gpi-dma + - qcom,sm8150-gpi-dma reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt deleted file mode 100644 index e7853143fa42..000000000000 --- a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.txt +++ /dev/null @@ -1,46 +0,0 @@ -Bindings for the Broadcom's brcm,bcm6345-gpio memory-mapped GPIO controllers. - -These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345 -are the only ones which don't need a pinctrl driver. -BCM6338 have 8-bit data and dirout registers, where GPIO state can be read -and/or written, and the direction changed from input to output. -BCM6345 have 16-bit data and dirout registers, where GPIO state can be read -and/or written, and the direction changed from input to output. - -Required properties: - - compatible: should be "brcm,bcm6345-gpio" - - reg-names: must contain - "dat" - data register - "dirout" - direction (output) register - - reg: address + size pairs describing the GPIO register sets; - order must correspond with the order of entries in reg-names - - #gpio-cells: must be set to 2. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low - - gpio-controller: Marks the device node as a gpio controller. - -Optional properties: - - native-endian: use native endian memory. - -Examples: - - BCM6338: - gpio: gpio-controller@fffe0407 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0xfffe0407 1>, <0xfffe040f 1>; - - #gpio-cells = <2>; - gpio-controller; - }; - - - BCM6345: - gpio: gpio-controller@fffe0406 { - compatible = "brcm,bcm6345-gpio"; - reg-names = "dirout", "dat"; - reg = <0xfffe0406 2>, <0xfffe040a 2>; - native-endian; - - #gpio-cells = <2>; - gpio-controller; - }; diff --git a/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml new file mode 100644 index 000000000000..4d69f79df859 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/brcm,bcm6345-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6345 GPIO controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: |+ + Bindings for Broadcom's BCM63xx memory-mapped GPIO controllers. + + These bindings can be used on any BCM63xx SoC. However, BCM6338 and BCM6345 + are the only ones which don't need a pinctrl driver. + + BCM6338 have 8-bit data and dirout registers, where GPIO state can be read + and/or written, and the direction changed from input to output. + BCM6345 have 16-bit data and dirout registers, where GPIO state can be read + and/or written, and the direction changed from input to output. + BCM6318, BCM6328, BCM6358, BCM6362, BCM6368 and BCM63268 have 32-bit data + and dirout registers, where GPIO state can be read and/or written, and the + direction changed from input to output. + +properties: + compatible: + enum: + - brcm,bcm6318-gpio + - brcm,bcm6328-gpio + - brcm,bcm6345-gpio + - brcm,bcm6358-gpio + - brcm,bcm6362-gpio + - brcm,bcm6368-gpio + - brcm,bcm63268-gpio + + gpio-controller: true + + "#gpio-cells": + const: 2 + + gpio-ranges: + maxItems: 1 + + native-endian: true + + reg: + maxItems: 2 + + reg-names: + items: + - const: dirout + - const: dat + +required: + - compatible + - reg + - reg-names + - gpio-controller + - '#gpio-cells' + +additionalProperties: false + +examples: + - | + gpio@fffe0406 { + compatible = "brcm,bcm6345-gpio"; + reg-names = "dirout", "dat"; + reg = <0xfffe0406 2>, <0xfffe040a 2>; + native-endian; + + gpio-controller; + #gpio-cells = <2>; + }; + + - | + gpio@0 { + compatible = "brcm,bcm63268-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 52>; + #gpio-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml new file mode 100644 index 000000000000..5fe19fa5f67c --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/fairchild,74hc595.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/fairchild,74hc595.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic 8-bit shift register + +maintainers: + - Maxime Ripard <mripard@kernel.org> + +properties: + compatible: + enum: + - fairchild,74hc595 + - nxp,74lvc594 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + description: + The second cell is only used to specify the GPIO polarity. + const: 2 + + registers-number: + description: Number of daisy-chained shift registers + + enable-gpios: + description: GPIO connected to the OE (Output Enable) pin. + maxItems: 1 + + spi-max-frequency: true + +patternProperties: + "^(hog-[0-9]+|.+-hog(-[0-9]+)?)$": + type: object + + properties: + gpio-hog: true + gpios: true + output-high: true + output-low: true + line-name: true + + required: + - gpio-hog + - gpios + + additionalProperties: false + +required: + - compatible + - reg + - gpio-controller + - '#gpio-cells' + - registers-number + +additionalProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + gpio5: gpio5@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <4>; + spi-max-frequency = <100000>; + }; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt deleted file mode 100644 index 2a97553d8d76..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt +++ /dev/null @@ -1,27 +0,0 @@ -* Generic 8-bits shift register GPIO driver - -Required properties: -- compatible: Should contain one of the following: - "fairchild,74hc595" - "nxp,74lvc594" -- reg : chip select number -- gpio-controller : Marks the device node as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify the gpio polarity: - 0 = active high - 1 = active low -- registers-number: Number of daisy-chained shift registers - -Optional properties: -- enable-gpios: GPIO connected to the OE (Output Enable) pin. - -Example: - -gpio5: gpio5@0 { - compatible = "fairchild,74hc595"; - reg = <0>; - gpio-controller; - #gpio-cells = <2>; - registers-number = <4>; - spi-max-frequency = <100000>; -}; diff --git a/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml new file mode 100644 index 000000000000..100f20cebd76 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/realtek,otto-gpio.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/realtek,otto-gpio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek Otto GPIO controller + +maintainers: + - Sander Vanheule <sander@svanheule.net> + - Bert Vermeulen <bert@biot.com> + +description: | + Realtek's GPIO controller on their MIPS switch SoCs (Otto platform) consists + of two banks of 32 GPIOs. These GPIOs can generate edge-triggered interrupts. + Each bank's interrupts are cascased into one interrupt line on the parent + interrupt controller, if provided. + This binding allows defining a single bank in the devicetree. The interrupt + controller is not supported on the fallback compatible name, which only + allows for GPIO port use. + +properties: + $nodename: + pattern: "^gpio@[0-9a-f]+$" + + compatible: + items: + - enum: + - realtek,rtl8380-gpio + - realtek,rtl8390-gpio + - const: realtek,otto-gpio + + reg: + maxItems: 1 + + "#gpio-cells": + const: 2 + + gpio-controller: true + + ngpios: + minimum: 1 + maximum: 32 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - "#gpio-cells" + - gpio-controller + +additionalProperties: false + +dependencies: + interrupt-controller: [ interrupts ] + +examples: + - | + gpio@3500 { + compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio"; + reg = <0x3500 0x1c>; + gpio-controller; + #gpio-cells = <2>; + ngpios = <24>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&rtlintc>; + interrupts = <23>; + }; + +... diff --git a/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml new file mode 100644 index 000000000000..d993e002cebe --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/rockchip,gpio-bank.yaml @@ -0,0 +1,82 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/rockchip,gpio-bank.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip GPIO bank + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + enum: + - rockchip,gpio-bank + - rockchip,rk3188-gpio-bank0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + +required: + - compatible + - reg + - interrupts + - clocks + - gpio-controller + - "#gpio-cells" + - interrupt-controller + - "#interrupt-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + pinctrl: pinctrl { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio@2000a000 { + compatible = "rockchip,rk3188-gpio-bank0"; + reg = <0x2000a000 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 9>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2003c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003c000 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk_gates8 10>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt b/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt deleted file mode 100644 index 9bb1240a68e0..000000000000 --- a/Documentation/devicetree/bindings/hwlock/sirf,hwspinlock.txt +++ /dev/null @@ -1,28 +0,0 @@ -SIRF Hardware spinlock device Binding ------------------------------------------------ - -Required properties : -- compatible : shall contain only one of the following: - "sirf,hwspinlock" - -- reg : the register address of hwspinlock - -- #hwlock-cells : hwlock users only use the hwlock id to represent a specific - hwlock, so the number of cells should be <1> here. - -Please look at the generic hwlock binding for usage information for consumers, -"Documentation/devicetree/bindings/hwlock/hwlock.txt" - -Example of hwlock provider: - hwlock { - compatible = "sirf,hwspinlock"; - reg = <0x13240000 0x00010000>; - #hwlock-cells = <1>; - }; - -Example of hwlock users: - node { - ... - hwlocks = <&hwlock 2>; - ... - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt b/Documentation/devicetree/bindings/i2c/i2c-mpc.txt deleted file mode 100644 index 42a390526957..000000000000 --- a/Documentation/devicetree/bindings/i2c/i2c-mpc.txt +++ /dev/null @@ -1,62 +0,0 @@ -* I2C - -Required properties : - - - reg : Offset and length of the register set for the device - - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a - compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121, - mpc5200 or mpc5200b. For the mpc5121, an additional node - "fsl,mpc5121-i2c-ctrl" is required as shown in the example below. - -Recommended properties : - - - interrupts : <a b> where a is the interrupt number and b is a - field that represents an encoding of the sense and level - information for the interrupt. This should be encoded based on - the information in section 2) depending on the type of interrupt - controller you have. - - fsl,preserve-clocking : boolean; if defined, the clock settings - from the bootloader are preserved (not touched). - - clock-frequency : desired I2C bus clock frequency in Hz. - - fsl,timeout : I2C bus timeout in microseconds. - -Examples : - - /* MPC5121 based board */ - i2c@1740 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5121-i2c", "fsl-i2c"; - reg = <0x1740 0x20>; - interrupts = <11 0x8>; - interrupt-parent = <&ipic>; - clock-frequency = <100000>; - }; - - i2ccontrol@1760 { - compatible = "fsl,mpc5121-i2c-ctrl"; - reg = <0x1760 0x8>; - }; - - /* MPC5200B based board */ - i2c@3d00 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c"; - reg = <0x3d00 0x40>; - interrupts = <2 15 0>; - interrupt-parent = <&mpc5200_pic>; - fsl,preserve-clocking; - }; - - /* MPC8544 base board */ - i2c@3100 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,mpc8544-i2c", "fsl-i2c"; - reg = <0x3100 0x100>; - interrupts = <43 2>; - interrupt-parent = <&mpic>; - clock-frequency = <400000>; - fsl,timeout = <10000>; - }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml new file mode 100644 index 000000000000..7b553d559c83 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/i2c-mpc.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/i2c/i2c-mpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: I2C-Bus adapter for MPC824x/83xx/85xx/86xx/512x/52xx SoCs + +maintainers: + - Chris Packham <chris.packham@alliedtelesis.co.nz> + +allOf: + - $ref: /schemas/i2c/i2c-controller.yaml# + +properties: + compatible: + oneOf: + - items: + - enum: + - mpc5200-i2c + - fsl,mpc5200-i2c + - fsl,mpc5121-i2c + - fsl,mpc8313-i2c + - fsl,mpc8543-i2c + - fsl,mpc8544-i2c + - const: fsl-i2c + - items: + - const: fsl,mpc5200b-i2c + - const: fsl,mpc5200-i2c + - const: fsl-i2c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + fsl,preserve-clocking: + $ref: /schemas/types.yaml#/definitions/flag + description: | + if defined, the clock settings from the bootloader are + preserved (not touched) + + fsl,timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + I2C bus timeout in microseconds + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + /* MPC5121 based board */ + i2c@1740 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5121-i2c", "fsl-i2c"; + reg = <0x1740 0x20>; + interrupts = <11 0x8>; + interrupt-parent = <&ipic>; + clock-frequency = <100000>; + }; + + /* MPC5200B based board */ + i2c@3d00 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc5200b-i2c", "fsl,mpc5200-i2c", "fsl-i2c"; + reg = <0x3d00 0x40>; + interrupts = <2 15 0>; + interrupt-parent = <&mpc5200_pic>; + fsl,preserve-clocking; + }; + + /* MPC8544 base board */ + i2c@3100 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,mpc8544-i2c", "fsl-i2c"; + reg = <0x3100 0x100>; + interrupts = <43 2>; + interrupt-parent = <&mpic>; + clock-frequency = <400000>; + fsl,timeout = <10000>; + }; +... diff --git a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml index adb5165505aa..62f3ca66274f 100644 --- a/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml +++ b/Documentation/devicetree/bindings/i3c/silvaco,i3c-master.yaml @@ -49,7 +49,7 @@ additionalProperties: true examples: - | i3c-master@a0000000 { - compatible = "silvaco,i3c-master"; + compatible = "silvaco,i3c-master-v1"; clocks = <&zynqmp_clk 71>, <&fclk>, <&sclk>; clock-names = "pclk", "fast_clk", "slow_clk"; interrupt-parent = <&gic>; diff --git a/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt b/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt index 84f1a1b505d2..be31cf05cd2e 100644 --- a/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt +++ b/Documentation/devicetree/bindings/infiniband/hisilicon-hns-roce.txt @@ -1,7 +1,7 @@ Hisilicon RoCE DT description Hisilicon RoCE engine is a part of network subsystem. -It works depending on other part of network wubsytem, such as, gmac and +It works depending on other part of network subsystem, such as gmac and dsa fabric. Additional properties are described here: diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml index 8c6418f76e94..3ec579d63570 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml @@ -39,6 +39,13 @@ properties: (active low). The line must be flagged with GPIO_ACTIVE_LOW. + wake-gpios: + maxItems: 1 + description: + Optional GPIO specifier for the touchscreen's wake pin + (active low). The line must be flagged with + GPIO_ACTIVE_LOW. + linux,gpio-keymap: $ref: /schemas/types.yaml#/definitions/uint32-array description: | @@ -53,6 +60,29 @@ properties: or experiment to determine which bit corresponds to which input. Use KEY_RESERVED for unused padding values. + atmel,wakeup-method: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + The WAKE line is an active-low input that is used to wake up the touch + controller from deep-sleep mode before communication with the controller + could be started. This optional feature used to minimize current + consumption when the controller is in deep sleep mode. This feature is + relevant only to some controller families, like mXT1386 controller for + example. + + The WAKE pin can be connected in one of the following ways: + 1) left permanently low + 2) connected to the I2C-compatible SCL pin + 3) connected to a GPIO pin on the host + enum: + - 0 # ATMEL_MXT_WAKEUP_NONE + - 1 # ATMEL_MXT_WAKEUP_I2C_SCL + - 2 # ATMEL_MXT_WAKEUP_GPIO + default: 0 + + wakeup-source: + type: boolean + required: - compatible - reg @@ -63,6 +93,7 @@ additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/atmel-maxtouch.h> #include <dt-bindings/gpio/gpio.h> i2c { #address-cells = <1>; @@ -75,6 +106,7 @@ examples: reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; vdda-supply = <&ab8500_ldo_aux2_reg>; vdd-supply = <&ab8500_ldo_aux5_reg>; + atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>; }; }; diff --git a/Documentation/devicetree/bindings/input/iqs626a.yaml b/Documentation/devicetree/bindings/input/iqs626a.yaml new file mode 100644 index 000000000000..0cb736c541c9 --- /dev/null +++ b/Documentation/devicetree/bindings/input/iqs626a.yaml @@ -0,0 +1,843 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/iqs626a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS626A Capacitive Touch Controller + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +description: | + The Azoteq IQS626A is a 14-channel capacitive touch controller that features + additional Hall-effect and inductive sensing capabilities. + + Link to datasheet: https://www.azoteq.com/ + +allOf: + - $ref: touchscreen/touchscreen.yaml# + +properties: + compatible: + const: azoteq,iqs626a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + azoteq,suspend-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the power mode during suspend as follows: + 0: Automatic (same as normal runtime, i.e. suspend/resume disabled) + 1: Low power (all sensing at a reduced reporting rate) + 2: Ultra-low power (ULP channel proximity sensing) + 3: Halt (no sensing) + + azoteq,clk-div: + type: boolean + description: Divides the device's core clock by a factor of 4. + + azoteq,ulp-enable: + type: boolean + description: + Permits the device to automatically enter ultra-low-power mode from low- + power mode. + + azoteq,ulp-update: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 3 + description: | + Specifies the rate at which the trackpad, generic and Hall channels are + updated during ultra-low-power mode as follows: + 0: 8 + 1: 13 + 2: 28 + 3: 54 + 4: 89 + 5: 135 + 6: 190 + 7: 256 + + azoteq,ati-band-disable: + type: boolean + description: Disables the ATI band check. + + azoteq,ati-lp-only: + type: boolean + description: Limits automatic ATI to low-power mode. + + azoteq,gpio3-select: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 1 + description: | + Selects the channel or group of channels for which the GPIO3 pin + represents touch state as follows: + 0: None + 1: ULP channel + 2: Trackpad + 3: Trackpad + 4: Generic channel 0 + 5: Generic channel 1 + 6: Generic channel 2 + 7: Hall channel + + azoteq,reseed-select: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the event(s) that prompt the device to reseed (i.e. reset the + long-term average) of an associated channel as follows: + 0: None + 1: Proximity + 2: Proximity or touch + 3: Proximity, touch or deep touch + + azoteq,thresh-extend: + type: boolean + description: Multiplies all touch and deep-touch thresholds by 4. + + azoteq,tracking-enable: + type: boolean + description: + Enables all associated channels to track their respective reference + channels. + + azoteq,reseed-offset: + type: boolean + description: + Applies an 8-count offset to all long-term averages upon either ATI or + reseed events. + + azoteq,rate-np-ms: + minimum: 0 + maximum: 255 + default: 150 + description: Specifies the report rate (in ms) during normal-power mode. + + azoteq,rate-lp-ms: + minimum: 0 + maximum: 255 + default: 150 + description: Specifies the report rate (in ms) during low-power mode. + + azoteq,rate-ulp-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 0 + description: Specifies the report rate (in ms) during ultra-low-power mode. + + azoteq,timeout-pwr-ms: + multipleOf: 512 + minimum: 0 + maximum: 130560 + default: 2560 + description: + Specifies the length of time (in ms) to wait for an event before moving + from normal-power mode to low-power mode, or (if 'azoteq,ulp-enable' is + present) from low-power mode to ultra-low-power mode. + + azoteq,timeout-lta-ms: + multipleOf: 512 + minimum: 0 + maximum: 130560 + default: 40960 + description: + Specifies the length of time (in ms) to wait before resetting the long- + term average of all channels. Specify the maximum timeout to disable it + altogether. + + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +patternProperties: + "^ulp-0|generic-[0-2]|hall$": + type: object + description: + Represents a single sensing channel. A channel is active if defined and + inactive otherwise. + + properties: + azoteq,ati-exclude: + type: boolean + description: + Prevents the channel from participating in an ATI event that is + manually triggered during initialization. + + azoteq,reseed-disable: + type: boolean + description: + Prevents the channel from being reseeded if the long-term average + timeout (defined in 'azoteq,timeout-lta') expires. + + azoteq,meas-cap-decrease: + type: boolean + description: + Decreases the internal measurement capacitance from 60 pF to 15 pF. + + azoteq,rx-inactive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 0 + description: | + Specifies how inactive CRX pins are to be terminated as follows: + 0: VSS + 1: Floating + 2: VREG (generic channels only) + + azoteq,linearize: + type: boolean + description: + Enables linearization of the channel's counts (generic and Hall + channels) or inverts the polarity of the channel's proximity or + touch states (ULP channel). + + azoteq,dual-direction: + type: boolean + description: + Specifies that the channel's long-term average is to freeze in the + presence of either increasing or decreasing counts, thereby permit- + ting events to be reported in either direction. + + azoteq,filt-disable: + type: boolean + description: Disables raw count filtering for the channel. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the channel's ATI mode as follows: + 0: Disabled + 1: Semi-partial + 2: Partial + 3: Full + + The default value is a function of the channel and the device's reset + user interface (RUI); reference the datasheet for further information + about the available RUI options. + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [75, 100, 150, 200] + description: + Specifies the channel's ATI base. The default value is a function + of the channel and the device's RUI. + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 32 + minimum: 0 + maximum: 2016 + description: + Specifies the channel's ATI target. The default value is a function + of the channel and the device's RUI. + + azoteq,cct-increase: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 16 + default: 0 + description: + Specifies the degree to which the channel's charge cycle time is to + be increased, with 0 representing no increase. The maximum value is + limited to 4 in the case of the ULP channel, and the property is un- + available entirely in the case of the Hall channel. + + azoteq,proj-bias: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the bias current applied during projected-capacitance + sensing as follows: + 0: 2.5 uA + 1: 5 uA + 2: 10 uA + 3: 20 uA + + This property is unavailable in the case of the Hall channel. + + azoteq,sense-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + description: | + Specifies the channel's sensing frequency as follows (parenthesized + numbers represent the frequency if 'azoteq,clk-div' is present): + 0: 4 MHz (1 MHz) + 1: 2 MHz (500 kHz) + 2: 1 MHz (250 kHz) + 3: 500 kHz (125 kHz) + + This property is unavailable in the case of the Hall channel. The + default value is a function of the channel and the device's RUI. + + azoteq,ati-band-tighten: + type: boolean + description: + Tightens the ATI band from 1/8 to 1/16 of the desired target (ULP and + generic channels only). + + azoteq,proj-enable: + type: boolean + description: Enables projected-capacitance sensing (ULP channel only). + + azoteq,filt-str-np-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during normal-power mode (ULP + and generic channels only). + + azoteq,filt-str-lp-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during low-power mode (ULP and + generic channels only). + + azoteq,filt-str-np-lta: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the long-term average filter strength during normal-power + mode (ULP and generic channels only). + + azoteq,filt-str-lp-lta: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the long-term average filter strength during low-power mode + (ULP and generic channels only). + + azoteq,rx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + description: + Specifies the CRX pin(s) associated with the channel. + + This property is unavailable in the case of the Hall channel. The + default value is a function of the channel and the device's RUI. + + azoteq,tx-enable: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 8 + items: + minimum: 0 + maximum: 7 + description: + Specifies the TX pin(s) associated with the channel. + + This property is unavailable in the case of the Hall channel. The + default value is a function of the channel and the device's RUI. + + azoteq,local-cap-size: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4] + default: 0 + description: | + Specifies the capacitance to be added to the channel as follows: + 0: 0 pF + 1: 0.5 pF + 2: 1.0 pF + 3: 1.5 pF + 4: 2.0 pF + + This property is unavailable in the case of the ULP or Hall channels. + + azoteq,sense-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 8, 9, 12, 14, 15] + description: | + Specifies the channel's sensing mode as follows: + 0: Self capacitance + 1: Projected capacitance + 8: Self inductance + 9: Mutual inductance + 12: External + 14: Hall effect + 15: Temperature + + This property is unavailable in the case of the ULP or Hall channels. + The default value is a function of the channel and the device's RUI. + + azoteq,tx-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the inductive sensing excitation frequency as follows + (parenthesized numbers represent the frequency if 'azoteq,clk-div' + is present): + 0: 16 MHz (4 MHz) + 1: 8 MHz (2 MHz) + 2: 4 MHz (1 MHz) + 3: 2 MHz (500 kHz) + + This property is unavailable in the case of the ULP or Hall channels. + + azoteq,invert-enable: + type: boolean + description: + Inverts the polarity of the states reported for proximity, touch and + deep-touch events relative to their respective thresholds (generic + channels only). + + azoteq,comp-disable: + type: boolean + description: + Disables compensation for the channel (generic channels only). + + azoteq,static-enable: + type: boolean + description: + Enables the static front-end for the channel (generic channels only). + + azoteq,assoc-select: + $ref: /schemas/types.yaml#/definitions/string-array + minItems: 1 + maxItems: 6 + items: + enum: + - ulp-0 + - trackpad-3x2 + - trackpad-3x3 + - generic-0 + - generic-1 + - generic-2 + - hall + description: + Specifies the associated channels for which the channel serves as a + reference channel. By default, no channels are selected. This prop- + erty is only available for the generic channels. + + azoteq,assoc-weight: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 0 + description: + Specifies the channel's impact weight if it acts as an associated + channel (0 = 0% impact, 255 = 200% impact). This property is only + available for the generic channels. + + patternProperties: + "^event-(prox|touch|deep)(-alt)?$": + type: object + description: + Represents a proximity, touch or deep-touch event reported by the + channel in response to a decrease in counts. Node names suffixed with + '-alt' instead correspond to an increase in counts. + + By default, the long-term average tracks an increase in counts such + that only events corresponding to a decrease in counts are reported + (refer to the datasheet for more information). + + Specify 'azoteq,dual-direction' to freeze the long-term average when + the counts increase or decrease such that events of either direction + can be reported. Alternatively, specify 'azoteq,invert-enable' to in- + vert the polarity of the states reported by the channel. + + Complementary events (e.g. event-touch and event-touch-alt) can both + be present and specify different key or switch codes, but not differ- + ent thresholds or hysteresis (if applicable). + + Proximity events are unavailable in the case of the Hall channel, and + deep-touch events are only available for the generic channels. Unless + otherwise specified, default values are a function of the channel and + the device's RUI. + + properties: + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + description: Specifies the threshold for the event. + + azoteq,hyst: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + description: + Specifies the hysteresis for the event (touch and deep-touch + events only). + + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Numeric key or switch code associated with the event. + + linux,input-type: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 5] + description: + Specifies whether the event is to be interpreted as a key (1) or + a switch (5). By default, Hall-channel events are interpreted as + switches and all others are interpreted as keys. + + dependencies: + linux,input-type: ["linux,code"] + + additionalProperties: false + + dependencies: + azoteq,assoc-weight: ["azoteq,assoc-select"] + + additionalProperties: false + + "^trackpad-3x[2-3]$": + type: object + description: + Represents all channels associated with the trackpad. The channels are + collectively active if the trackpad is defined and inactive otherwise. + + properties: + azoteq,ati-exclude: + type: boolean + description: + Prevents the trackpad channels from participating in an ATI event + that is manually triggered during initialization. + + azoteq,reseed-disable: + type: boolean + description: + Prevents the trackpad channels from being reseeded if the long-term + average timeout (defined in 'azoteq,timeout-lta') expires. + + azoteq,meas-cap-decrease: + type: boolean + description: + Decreases the internal measurement capacitance from 60 pF to 15 pF. + + azoteq,rx-inactive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + description: | + Specifies how inactive CRX pins are to be terminated as follows: + 0: VSS + 1: Floating + + azoteq,linearize: + type: boolean + description: Inverts the polarity of the trackpad's touch state. + + azoteq,dual-direction: + type: boolean + description: + Specifies that the trackpad's long-term averages are to freeze in + the presence of either increasing or decreasing counts, thereby + permitting events to be reported in either direction. + + azoteq,filt-disable: + type: boolean + description: Disables raw count filtering for the trackpad channels. + + azoteq,ati-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the trackpad's ATI mode as follows: + 0: Disabled + 1: Semi-partial + 2: Partial + 3: Full + + azoteq,ati-base: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 6 + maxItems: 9 + items: + minimum: 45 + maximum: 300 + default: [45, 45, 45, 45, 45, 45, 45, 45, 45] + description: Specifies each individual trackpad channel's ATI base. + + azoteq,ati-target: + $ref: /schemas/types.yaml#/definitions/uint32 + multipleOf: 32 + minimum: 0 + maximum: 2016 + default: 0 + description: Specifies the trackpad's ATI target. + + azoteq,cct-increase: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 4 + default: 0 + description: + Specifies the degree to which the trackpad's charge cycle time is to + be increased, with 0 representing no increase. + + azoteq,proj-bias: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the bias current applied during projected-capacitance + sensing as follows: + 0: 2.5 uA + 1: 5 uA + 2: 10 uA + 3: 20 uA + + azoteq,sense-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: | + Specifies the trackpad's sensing frequency as follows (parenthesized + numbers represent the frequency if 'azoteq,clk-div' is present): + 0: 4 MHz (1 MHz) + 1: 2 MHz (500 kHz) + 2: 1 MHz (250 kHz) + 3: 500 kHz (125 kHz) + + azoteq,ati-band-tighten: + type: boolean + description: + Tightens the ATI band from 1/8 to 1/16 of the desired target. + + azoteq,thresh: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 6 + maxItems: 9 + items: + minimum: 0 + maximum: 255 + default: [0, 0, 0, 0, 0, 0, 0, 0, 0] + description: + Specifies each individual trackpad channel's touch threshold. + + azoteq,hyst: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + description: Specifies the trackpad's touch hysteresis. + + azoteq,lta-update: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6, 7] + default: 0 + description: | + Specifies the update rate of the trackpad's long-term average during + ultra-low-power mode as follows: + 0: 2 + 1: 4 + 2: 8 + 3: 16 + 4: 32 + 5: 64 + 6: 128 + 7: 255 + + azoteq,filt-str-trackpad: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: Specifies the trackpad coordinate filter strength. + + azoteq,filt-str-np-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during normal-power mode. + + azoteq,filt-str-lp-cnt: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Specifies the raw count filter strength during low-power mode. + + linux,keycodes: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 6 + description: | + Specifies the numeric keycodes associated with each available gesture + in the following order (enter 0 for unused gestures): + 0: Positive flick or swipe in X direction + 1: Negative flick or swipe in X direction + 2: Positive flick or swipe in Y direction + 3: Negative flick or swipe in Y direction + 4: Tap + 5: Hold + + azoteq,gesture-swipe: + type: boolean + description: + Directs the device to interpret axial gestures as a swipe (finger + remains on trackpad) instead of a flick (finger leaves trackpad). + + azoteq,timeout-tap-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 0 + description: + Specifies the length of time (in ms) within which a trackpad touch + must be released in order to be interpreted as a tap. + + azoteq,timeout-swipe-ms: + multipleOf: 16 + minimum: 0 + maximum: 4080 + default: 0 + description: + Specifies the length of time (in ms) within which an axial gesture + must be completed in order to be interpreted as a flick or swipe. + + azoteq,thresh-swipe: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + default: 0 + description: + Specifies the number of points across which an axial gesture must + travel in order to be interpreted as a flick or swipe. + + dependencies: + azoteq,gesture-swipe: ["linux,keycodes"] + azoteq,timeout-tap-ms: ["linux,keycodes"] + azoteq,timeout-swipe-ms: ["linux,keycodes"] + azoteq,thresh-swipe: ["linux,keycodes"] + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + iqs626a@44 { + #address-cells = <1>; + #size-cells = <0>; + + compatible = "azoteq,iqs626a"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <17 IRQ_TYPE_LEVEL_LOW>; + + azoteq,rate-np-ms = <16>; + azoteq,rate-lp-ms = <160>; + + azoteq,timeout-pwr-ms = <2560>; + azoteq,timeout-lta-ms = <32768>; + + ulp-0 { + azoteq,meas-cap-decrease; + + azoteq,ati-base = <75>; + azoteq,ati-target = <1024>; + + azoteq,rx-enable = <2>, <3>, <4>, + <5>, <6>, <7>; + + event-prox { + linux,code = <KEY_POWER>; + }; + }; + + trackpad-3x3 { + azoteq,filt-str-np-cnt = <1>; + azoteq,filt-str-lp-cnt = <1>; + + azoteq,hyst = <4>; + azoteq,thresh = <35>, <40>, <40>, + <38>, <33>, <38>, + <35>, <35>, <35>; + + azoteq,ati-mode = <3>; + azoteq,ati-base = <195>, <195>, <195>, + <195>, <195>, <195>, + <195>, <195>, <195>; + azoteq,ati-target = <512>; + + azoteq,proj-bias = <1>; + azoteq,sense-freq = <2>; + + linux,keycodes = <KEY_VOLUMEUP>, + <KEY_VOLUMEDOWN>, + <KEY_NEXTSONG>, + <KEY_PREVIOUSSONG>, + <KEY_PLAYPAUSE>, + <KEY_STOPCD>; + + azoteq,gesture-swipe; + azoteq,timeout-swipe-ms = <800>; + azoteq,timeout-tap-ms = <400>; + azoteq,thresh-swipe = <40>; + }; + + /* + * Preserve the default register settings for + * the temperature-tracking channel leveraged + * by reset user interface (RUI) 1. + * + * Scalar properties (e.g. ATI mode) are left + * untouched by simply omitting them; boolean + * properties must be specified explicitly as + * needed. + */ + generic-2 { + azoteq,reseed-disable; + azoteq,meas-cap-decrease; + azoteq,dual-direction; + azoteq,comp-disable; + azoteq,static-enable; + }; + + hall { + azoteq,reseed-disable; + azoteq,meas-cap-decrease; + + event-touch { + linux,code = <SW_LID>; + }; + }; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml new file mode 100644 index 000000000000..b5f377215c09 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/azoteq,iqs5xx.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/azoteq,iqs5xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS550/572/525 Trackpad/Touchscreen Controller + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +description: | + The Azoteq IQS550, IQS572 and IQS525 trackpad and touchscreen controllers + employ projected-capacitance sensing and can track up to five independent + contacts. + + Link to datasheet: https://www.azoteq.com/ + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - azoteq,iqs550 + - azoteq,iqs572 + - azoteq,iqs525 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + wakeup-source: true + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@74 { + compatible = "azoteq,iqs550"; + reg = <0x74>; + interrupt-parent = <&gpio>; + interrupts = <27 IRQ_TYPE_LEVEL_HIGH>; + reset-gpios = <&gpio 22 (GPIO_ACTIVE_LOW | + GPIO_PUSH_PULL)>; + + touchscreen-size-x = <800>; + touchscreen-size-y = <480>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml new file mode 100644 index 000000000000..942562f1e45b --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/hycon,hy46xx.yaml @@ -0,0 +1,119 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/hycon,hy46xx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Hycon HY46XX series touchscreen controller bindings + +description: | + There are 6 variants of the chip for various touch panel sizes and cover lens material + Glass: 0.3mm--4.0mm + PET/PMMA: 0.2mm--2.0mm + HY4613(B)-N048 < 6" + HY4614(B)-N068 7" .. 10.1" + HY4621-NS32 < 5" + HY4623-NS48 5.1" .. 7" + Glass: 0.3mm--8.0mm + PET/PMMA: 0.2mm--4.0mm + HY4633(B)-N048 < 6" + HY4635(B)-N048 < 7" .. 10.1" + +maintainers: + - Giulio Benetti <giulio.benetti@benettiengineering.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - hycon,hy4613 + - hycon,hy4614 + - hycon,hy4621 + - hycon,hy4623 + - hycon,hy4633 + - hycon,hy4635 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vcc-supply: true + + hycon,threshold: + description: Allows setting the sensitivity in the range from 0 to 255. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 255 + + hycon,glove-enable: + type: boolean + description: Allows enabling glove setting. + + hycon,report-speed-hz: + description: Allows setting the report speed in Hertz. + minimum: 1 + maximum: 255 + + hycon,noise-filter-enable: + type: boolean + description: Allows enabling power noise filter. + + hycon,filter-data: + description: Allows setting how many samples throw before reporting touch + in the range from 0 to 5. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + + hycon,gain: + description: Allows setting the sensitivity distance in the range from 0 to 5. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 5 + + hycon,edge-offset: + description: Allows setting the edge compensation in the range from 0 to 16. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 16 + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + interrupt-controller: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@1c { + compatible = "hycon,hy4633"; + reg = <0x1c>; + interrupt-parent = <&gpio2>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml new file mode 100644 index 000000000000..a190e7baac31 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/ilitek_ts_i2c.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/ilitek_ts_i2c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ilitek I2C Touchscreen Controller + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + enum: + - ilitek,ili2130 + - ilitek,ili2131 + - ilitek,ili2132 + - ilitek,ili2316 + - ilitek,ili2322 + - ilitek,ili2323 + - ilitek,ili2326 + - ilitek,ili2520 + - ilitek,ili2521 + + reg: + const: 0x41 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + wakeup-source: + type: boolean + description: touchscreen can be used as a wakeup source. + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - reset-gpios + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + touchscreen@41 { + compatible = "ilitek,ili2520"; + reg = <0x41>; + + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; + touchscreen-inverted-y; + wakeup-source; + }; + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt b/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt deleted file mode 100644 index efa0820e2469..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/iqs5xx.txt +++ /dev/null @@ -1,80 +0,0 @@ -Azoteq IQS550/572/525 Trackpad/Touchscreen Controller - -Required properties: - -- compatible : Must be equal to one of the following: - "azoteq,iqs550" - "azoteq,iqs572" - "azoteq,iqs525" - -- reg : I2C slave address for the device. - -- interrupts : GPIO to which the device's active-high RDY - output is connected (see [0]). - -- reset-gpios : GPIO to which the device's active-low NRST - input is connected (see [1]). - -Optional properties: - -- touchscreen-min-x : See [2]. - -- touchscreen-min-y : See [2]. - -- touchscreen-size-x : See [2]. If this property is omitted, the - maximum x-coordinate is specified by the - device's "X Resolution" register. - -- touchscreen-size-y : See [2]. If this property is omitted, the - maximum y-coordinate is specified by the - device's "Y Resolution" register. - -- touchscreen-max-pressure : See [2]. Pressure is expressed as the sum of - the deltas across all channels impacted by a - touch event. A channel's delta is calculated - as its count value minus a reference, where - the count value is inversely proportional to - the channel's capacitance. - -- touchscreen-fuzz-x : See [2]. - -- touchscreen-fuzz-y : See [2]. - -- touchscreen-fuzz-pressure : See [2]. - -- touchscreen-inverted-x : See [2]. Inversion is applied relative to that - which may already be specified by the device's - FLIP_X and FLIP_Y register fields. - -- touchscreen-inverted-y : See [2]. Inversion is applied relative to that - which may already be specified by the device's - FLIP_X and FLIP_Y register fields. - -- touchscreen-swapped-x-y : See [2]. Swapping is applied relative to that - which may already be specified by the device's - SWITCH_XY_AXIS register field. - -[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -[1]: Documentation/devicetree/bindings/gpio/gpio.txt -[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt - -Example: - - &i2c1 { - /* ... */ - - touchscreen@74 { - compatible = "azoteq,iqs550"; - reg = <0x74>; - interrupt-parent = <&gpio>; - interrupts = <17 4>; - reset-gpios = <&gpio 27 1>; - - touchscreen-size-x = <640>; - touchscreen-size-y = <480>; - - touchscreen-max-pressure = <16000>; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml new file mode 100644 index 000000000000..62366886fb3e --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/melfas,mms114.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/melfas,mms114.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Melfas MMS114 family touchscreen controller bindings + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + $nodename: + pattern: "^touchscreen(@.*)?$" + + compatible: + items: + - enum: + - melfas,mms114 + - melfas,mms134s + - melfas,mms136 + - melfas,mms152 + - melfas,mms345l + + reg: + description: I2C address + + clock-frequency: + description: I2C client clock frequency, defined for host + minimum: 100000 + maximum: 400000 + + interrupts: + maxItems: 1 + + avdd-supply: + description: Analog power supply regulator on AVDD pin + + vdd-supply: + description: Digital power supply regulator on VDD pin + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-fuzz-pressure: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + touchscreen-max-pressure: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@48 { + compatible = "melfas,mms114"; + reg = <0x48>; + interrupt-parent = <&gpio>; + interrupts = <39 IRQ_TYPE_EDGE_FALLING>; + avdd-supply = <&ldo1_reg>; + vdd-supply = <&ldo2_reg>; + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + touchscreen-fuzz-x = <10>; + touchscreen-fuzz-y = <10>; + touchscreen-fuzz-pressure = <10>; + touchscreen-inverted-x; + touchscreen-inverted-y; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt b/Documentation/devicetree/bindings/input/touchscreen/mms114.txt deleted file mode 100644 index 707234cfd7e6..000000000000 --- a/Documentation/devicetree/bindings/input/touchscreen/mms114.txt +++ /dev/null @@ -1,42 +0,0 @@ -* MELFAS MMS114/MMS152/MMS345L touchscreen controller - -Required properties: -- compatible: should be one of: - - "melfas,mms114" - - "melfas,mms152" - - "melfas,mms345l" -- reg: I2C address of the chip -- interrupts: interrupt to which the chip is connected -- touchscreen-size-x: See [1] -- touchscreen-size-y: See [1] - -Optional properties: -- touchscreen-fuzz-x: See [1] -- touchscreen-fuzz-y: See [1] -- touchscreen-fuzz-pressure: See [1] -- touchscreen-inverted-x: See [1] -- touchscreen-inverted-y: See [1] -- touchscreen-swapped-x-y: See [1] - -[1]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt - -Example: - - i2c@00000000 { - /* ... */ - - touchscreen@48 { - compatible = "melfas,mms114"; - reg = <0x48>; - interrupts = <39 0>; - touchscreen-size-x = <720>; - touchscreen-size-y = <1280>; - touchscreen-fuzz-x = <10>; - touchscreen-fuzz-y = <10>; - touchscreen-fuzz-pressure = <10>; - touchscreen-inverted-x; - touchscreen-inverted-y; - }; - - /* ... */ - }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml new file mode 100644 index 000000000000..3a42c23faf6f --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/mstar,msg2638.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/mstar,msg2638.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MStar msg2638 touchscreen controller Bindings + +maintainers: + - Vincent Knecht <vincent.knecht@mailoo.org> + +allOf: + - $ref: touchscreen.yaml# + +properties: + compatible: + const: mstar,msg2638 + + reg: + const: 0x26 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + vdd-supply: + description: Power supply regulator for the chip + + vddio-supply: + description: Power supply regulator for the I2C bus + + touchscreen-size-x: true + touchscreen-size-y: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - reset-gpios + - touchscreen-size-x + - touchscreen-size-y + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + touchscreen@26 { + compatible = "mstar,msg2638"; + reg = <0x26>; + interrupt-parent = <&msmgpio>; + interrupts = <13 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&msmgpio 100 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ts_int_reset_default>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l5>; + touchscreen-size-x = <2048>; + touchscreen-size-y = <2048>; + }; + }; + +... diff --git a/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml index df5d8d1ead70..160ff4b07cac 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/idt,32434-pic.yaml @@ -22,6 +22,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + interrupt-controller: true required: @@ -29,6 +32,7 @@ required: - compatible - reg - interrupt-controller + - interrupts additionalProperties: false diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml index 6ba161dea4d8..9d27aa5111d4 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.yaml +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.yaml @@ -34,6 +34,7 @@ properties: items: - enum: - qcom,sc7180-smmu-500 + - qcom,sc7280-smmu-500 - qcom,sc8180x-smmu-500 - qcom,sdm845-smmu-500 - qcom,sm8150-smmu-500 diff --git a/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml b/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml new file mode 100644 index 000000000000..7003e12f55f9 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/sprd,iommu.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2020 Unisoc Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iommu/sprd,iommu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc IOMMU and Multi-media MMU + +maintainers: + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + enum: + - sprd,iommu-v1 + + "#iommu-cells": + const: 0 + description: + Unisoc IOMMUs are all single-master IOMMU devices, therefore no + additional information needs to associate with its master device. + Please refer to the generic bindings document for more details, + Documentation/devicetree/bindings/iommu/iommu.txt + + reg: + maxItems: 1 + + clocks: + description: + Reference to a gate clock phandle, since access to some of IOMMUs are + controlled by gate clock, but this is not required. + +required: + - compatible + - reg + - "#iommu-cells" + +additionalProperties: false + +examples: + - | + iommu_disp: iommu@63000800 { + compatible = "sprd,iommu-v1"; + reg = <0x63000800 0x80>; + #iommu-cells = <0>; + }; + + - | + iommu_jpg: iommu@62300300 { + compatible = "sprd,iommu-v1"; + reg = <0x62300300 0x80>; + #iommu-cells = <0>; + clocks = <&mm_gate 1>; + }; + +... diff --git a/Documentation/devicetree/bindings/leds/leds-rt4505.yaml b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml new file mode 100644 index 000000000000..5b0c74aa6723 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/leds-rt4505.yaml @@ -0,0 +1,57 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/leds/leds-rt4505.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT4505 Single Channel LED Driver + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT4505 is a flash LED driver that can support up to 375mA and 1.5A for + torch and flash mode, respectively. + + The data sheet can be found at: + https://www.richtek.com/assets/product_file/RT4505/DS4505-02.pdf + +properties: + compatible: + const: richtek,rt4505 + + reg: + description: I2C slave address of the controller. + maxItems: 1 + + led: + type: object + $ref: common.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/leds/common.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + led-controller@63 { + compatible = "richtek,rt4505"; + reg = <0x63>; + + rt4505_flash: led { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <375000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <800000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml index fe7c4cbfe4ba..dd1a5ce5896c 100644 --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml @@ -193,23 +193,35 @@ required: - interrupts - clocks - power-domains - - resets - -if: - properties: - compatible: - contains: - enum: - - renesas,vin-r8a7778 - - renesas,vin-r8a7779 - - renesas,rcar-gen2-vin -then: - required: - - port -else: - required: - - renesas,id - - ports + +allOf: + - if: + not: + properties: + compatible: + contains: + enum: + - renesas,vin-r8a7778 + - renesas,vin-r8a7779 + then: + required: + - resets + + - if: + properties: + compatible: + contains: + enum: + - renesas,vin-r8a7778 + - renesas,vin-r8a7779 + - renesas,rcar-gen2-vin + then: + required: + - port + else: + required: + - renesas,id + - ports additionalProperties: false diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml new file mode 100644 index 000000000000..afc569bc15cf --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6318 GPIO System Controller Device Tree Bindings + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6318 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6318-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6318-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6318-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 50>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@10 { + compatible = "brcm,bcm6318-pinctrl"; + reg = <0x18 0x10>, <0x54 0x18>; + + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { + function = "ephy0_spd_led"; + pins = "gpio0"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { + function = "ephy1_spd_led"; + pins = "gpio1"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { + function = "ephy2_spd_led"; + pins = "gpio2"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { + function = "ephy3_spd_led"; + pins = "gpio3"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led-pins { + function = "ephy0_act_led"; + pins = "gpio4"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led-pins { + function = "ephy1_act_led"; + pins = "gpio5"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led-pins { + function = "ephy2_act_led"; + pins = "gpio6"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led-pins { + function = "ephy3_act_led"; + pins = "gpio7"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led-pins { + function = "inet_act_led"; + pins = "gpio8"; + }; + + pinctrl_inet_fail_led: inet_fail_led-pins { + function = "inet_fail_led"; + pins = "gpio9"; + }; + + pinctrl_dsl_led: dsl_led-pins { + function = "dsl_led"; + pins = "gpio10"; + }; + + pinctrl_post_fail_led: post_fail_led-pins { + function = "post_fail_led"; + pins = "gpio11"; + }; + + pinctrl_wlan_wps_led: wlan_wps_led-pins { + function = "wlan_wps_led"; + pins = "gpio12"; + }; + + pinctrl_usb_pwron: usb_pwron-pins { + function = "usb_pwron"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio13"; + }; + + pinctrl_usb_active: usb_active-pins { + function = "usb_active"; + pins = "gpio40"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml new file mode 100644 index 000000000000..c7771c86d7c1 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml @@ -0,0 +1,194 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm63268-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM63268 GPIO System Controller Device Tree Bindings + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM63268 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm63268-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@100000c0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm63268-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x100000c0 0x80>; + ranges = <0 0x100000c0 0x80>; + + gpio@0 { + compatible = "brcm,bcm63268-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 52>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@10 { + compatible = "brcm,bcm63268-pinctrl"; + reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio0"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio1"; + }; + }; + + pinctrl_hsspi_cs4: hsspi_cs4-pins { + function = "hsspi_cs4"; + pins = "gpio16"; + }; + + pinctrl_hsspi_cs5: hsspi_cs5-pins { + function = "hsspi_cs5"; + pins = "gpio17"; + }; + + pinctrl_hsspi_cs6: hsspi_cs6-pins { + function = "hsspi_cs6"; + pins = "gpio8"; + }; + + pinctrl_hsspi_cs7: hsspi_cs7-pins { + function = "hsspi_cs7"; + pins = "gpio9"; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio19"; + }; + }; + + pinctrl_vreq_clk: vreq_clk-pins { + function = "vreq_clk"; + pins = "gpio22"; + }; + + pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins { + function = "pcie_clkreq_b"; + pins = "gpio23"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio30"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio31"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + group = "nand_grp"; + }; + + pinctrl_gpio35_alt: gpio35_alt-pins { + function = "gpio35_alt"; + pin = "gpio35"; + }; + + pinctrl_dectpd: dectpd-pins { + function = "dectpd"; + group = "dectpd_grp"; + }; + + pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { + function = "vdsl_phy_override_0"; + group = "vdsl_phy_override_0_grp"; + }; + + pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { + function = "vdsl_phy_override_1"; + group = "vdsl_phy_override_1_grp"; + }; + + pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { + function = "vdsl_phy_override_2"; + group = "vdsl_phy_override_2_grp"; + }; + + pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { + function = "vdsl_phy_override_3"; + group = "vdsl_phy_override_3_grp"; + }; + + pinctrl_dsl_gpio8: dsl_gpio8-pins { + function = "dsl_gpio8"; + group = "dsl_gpio8"; + }; + + pinctrl_dsl_gpio9: dsl_gpio9-pins { + function = "dsl_gpio9"; + group = "dsl_gpio9"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml new file mode 100644 index 000000000000..33963c11ae62 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml @@ -0,0 +1,162 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6328-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6328 GPIO System Controller Device Tree Bindings + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6328 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6328-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6328-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6328-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 32>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6328-pinctrl"; + reg = <0x18 0x10>; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led-pins { + function = "inet_act_led"; + pins = "gpio11"; + }; + + pinctrl_pcie_clkreq: pcie_clkreq-pins { + function = "pcie_clkreq"; + pins = "gpio16"; + }; + + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { + function = "led"; + pins = "gpio17"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { + function = "led"; + pins = "gpio18"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { + function = "led"; + pins = "gpio19"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { + function = "led"; + pins = "gpio20"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led-pins { + function = "ephy0_act_led"; + pins = "gpio25"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led-pins { + function = "ephy1_act_led"; + pins = "gpio26"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led-pins { + function = "ephy2_act_led"; + pins = "gpio27"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led-pins { + function = "ephy3_act_led"; + pins = "gpio28"; + }; + + pinctrl_hsspi_cs1: hsspi_cs1-pins { + function = "hsspi_cs1"; + pins = "hsspi_cs1"; + }; + + pinctrl_usb_port1_device: usb_port1_device-pins { + function = "usb_device_port"; + pins = "usb_port1"; + }; + + pinctrl_usb_port1_host: usb_port1_host-pins { + function = "usb_host_port"; + pins = "usb_port1"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml new file mode 100644 index 000000000000..3e44bea78b03 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml @@ -0,0 +1,130 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6358-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6358 GPIO System Controller Device Tree Bindings + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6358 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6358-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@fffe0080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6358-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0xfffe0080 0x80>; + ranges = <0 0xfffe0080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6358-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 40>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6358-pinctrl"; + reg = <0x18 0x4>; + + pinctrl_ebi_cs: ebi_cs-pins { + function = "ebi_cs"; + groups = "ebi_cs_grp"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + groups = "uart1_grp"; + }; + + pinctrl_serial_led: serial_led-pins { + function = "serial_led"; + groups = "serial_led_grp"; + }; + + pinctrl_legacy_led: legacy_led-pins { + function = "legacy_led"; + groups = "legacy_led_grp"; + }; + + pinctrl_led: led-pins { + function = "led"; + groups = "led_grp"; + }; + + pinctrl_spi_cs_23: spi_cs-pins { + function = "spi_cs"; + groups = "spi_cs_grp"; + }; + + pinctrl_utopia: utopia-pins { + function = "utopia"; + groups = "utopia_grp"; + }; + + pinctrl_pwm_syn_clk: pwm_syn_clk-pins { + function = "pwm_syn_clk"; + groups = "pwm_syn_clk_grp"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + groups = "sys_irq_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml new file mode 100644 index 000000000000..48d14a5fe0d5 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml @@ -0,0 +1,236 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6362-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6362 GPIO System Controller Device Tree Bindings + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6362 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6362-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6362-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6362-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 48>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6362-pinctrl"; + reg = <0x18 0x10>, <0x38 0x4>; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio0"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + pins = "gpio1"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio2"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio3"; + }; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio4"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio5"; + }; + + pinctrl_robosw_led0: robosw_led0-pins { + function = "robosw_led0"; + pins = "gpio6"; + }; + + pinctrl_robosw_led1: robosw_led1-pins { + function = "robosw_led1"; + pins = "gpio7"; + }; + + pinctrl_inet_led: inet_led-pins { + function = "inet_led"; + pins = "gpio8"; + }; + + pinctrl_spi_cs2: spi_cs2-pins { + function = "spi_cs2"; + pins = "gpio9"; + }; + + pinctrl_spi_cs3: spi_cs3-pins { + function = "spi_cs3"; + pins = "gpio10"; + }; + + pinctrl_ntr_pulse: ntr_pulse-pins { + function = "ntr_pulse"; + pins = "gpio11"; + }; + + pinctrl_uart1_scts: uart1_scts-pins { + function = "uart1_scts"; + pins = "gpio12"; + }; + + pinctrl_uart1_srts: uart1_srts-pins { + function = "uart1_srts"; + pins = "gpio13"; + }; + + pinctrl_uart1: uart1-pins { + pinctrl_uart1_sdin: uart1_sdin-pins { + function = "uart1_sdin"; + pins = "gpio14"; + }; + + pinctrl_uart1_sdout: uart1_sdout-pins { + function = "uart1_sdout"; + pins = "gpio15"; + }; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio16"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio17"; + }; + + pinctrl_adsl_spi_clk: adsl_spi_clk-pins { + function = "adsl_spi_clk"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_cs: adsl_spi_cs-pins { + function = "adsl_spi_cs"; + pins = "gpio19"; + }; + }; + + pinctrl_ephy0_led: ephy0_led-pins { + function = "ephy0_led"; + pins = "gpio20"; + }; + + pinctrl_ephy1_led: ephy1_led-pins { + function = "ephy1_led"; + pins = "gpio21"; + }; + + pinctrl_ephy2_led: ephy2_led-pins { + function = "ephy2_led"; + pins = "gpio22"; + }; + + pinctrl_ephy3_led: ephy3_led-pins { + function = "ephy3_led"; + pins = "gpio23"; + }; + + pinctrl_ext_irq0: ext_irq0-pins { + function = "ext_irq0"; + pins = "gpio24"; + }; + + pinctrl_ext_irq1: ext_irq1-pins { + function = "ext_irq1"; + pins = "gpio25"; + }; + + pinctrl_ext_irq2: ext_irq2-pins { + function = "ext_irq2"; + pins = "gpio26"; + }; + + pinctrl_ext_irq3: ext_irq3-pins { + function = "ext_irq3"; + pins = "gpio27"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + group = "nand_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml new file mode 100644 index 000000000000..307270b0cfed --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml @@ -0,0 +1,246 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6368 GPIO System Controller Device Tree Bindings + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Broadcom BCM6368 SoC GPIO system controller which provides a register map + for controlling the GPIO and pins of the SoC. + +properties: + "#address-cells": true + + "#size-cells": true + + compatible: + items: + - const: brcm,bcm6368-gpio-sysctl + - const: syscon + - const: simple-mfd + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^gpio@[0-9a-f]+$": + # Child node + type: object + $ref: "../gpio/brcm,bcm6345-gpio.yaml" + description: + GPIO controller for the SoC GPIOs. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + + "^pinctrl@[0-9a-f]+$": + # Child node + type: object + $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml" + description: + Pin controller for the SoC pins. This child node definition + should follow the bindings specified in + Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml. + +required: + - "#address-cells" + - compatible + - ranges + - reg + - "#size-cells" + +additionalProperties: false + +examples: + - | + syscon@10000080 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "brcm,bcm6368-gpio-sysctl", "syscon", "simple-mfd"; + reg = <0x10000080 0x80>; + ranges = <0 0x10000080 0x80>; + + gpio@0 { + compatible = "brcm,bcm6368-gpio"; + reg-names = "dirout", "dat"; + reg = <0x0 0x8>, <0x8 0x8>; + + gpio-controller; + gpio-ranges = <&pinctrl 0 0 38>; + #gpio-cells = <2>; + }; + + pinctrl: pinctrl@18 { + compatible = "brcm,bcm6368-pinctrl"; + reg = <0x18 0x4>, <0x38 0x4>; + + pinctrl_analog_afe_0: analog_afe_0-pins { + function = "analog_afe_0"; + pins = "gpio0"; + }; + + pinctrl_analog_afe_1: analog_afe_1-pins { + function = "analog_afe_1"; + pins = "gpio1"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + pins = "gpio2"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio3"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio4"; + }; + }; + + pinctrl_inet_led: inet_led-pins { + function = "inet_led"; + pins = "gpio5"; + }; + + pinctrl_ephy0_led: ephy0_led-pins { + function = "ephy0_led"; + pins = "gpio6"; + }; + + pinctrl_ephy1_led: ephy1_led-pins { + function = "ephy1_led"; + pins = "gpio7"; + }; + + pinctrl_ephy2_led: ephy2_led-pins { + function = "ephy2_led"; + pins = "gpio8"; + }; + + pinctrl_ephy3_led: ephy3_led-pins { + function = "ephy3_led"; + pins = "gpio9"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio10"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio11"; + }; + + pinctrl_robosw_led0: robosw_led0-pins { + function = "robosw_led0"; + pins = "gpio12"; + }; + + pinctrl_robosw_led1: robosw_led1-pins { + function = "robosw_led1"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio14"; + }; + + pinctrl_pci: pci-pins { + pinctrl_pci_req1: pci_req1-pins { + function = "pci_req1"; + pins = "gpio16"; + }; + + pinctrl_pci_gnt1: pci_gnt1-pins { + function = "pci_gnt1"; + pins = "gpio17"; + }; + + pinctrl_pci_intb: pci_intb-pins { + function = "pci_intb"; + pins = "gpio18"; + }; + + pinctrl_pci_req0: pci_req0-pins { + function = "pci_req0"; + pins = "gpio19"; + }; + + pinctrl_pci_gnt0: pci_gnt0-pins { + function = "pci_gnt0"; + pins = "gpio20"; + }; + }; + + pinctrl_pcmcia: pcmcia-pins { + pinctrl_pcmcia_cd1: pcmcia_cd1-pins { + function = "pcmcia_cd1"; + pins = "gpio22"; + }; + + pinctrl_pcmcia_cd2: pcmcia_cd2-pins { + function = "pcmcia_cd2"; + pins = "gpio23"; + }; + + pinctrl_pcmcia_vs1: pcmcia_vs1-pins { + function = "pcmcia_vs1"; + pins = "gpio24"; + }; + + pinctrl_pcmcia_vs2: pcmcia_vs2-pins { + function = "pcmcia_vs2"; + pins = "gpio25"; + }; + }; + + pinctrl_ebi_cs2: ebi_cs2-pins { + function = "ebi_cs2"; + pins = "gpio26"; + }; + + pinctrl_ebi_cs3: ebi_cs3-pins { + function = "ebi_cs3"; + pins = "gpio27"; + }; + + pinctrl_spi_cs2: spi_cs2-pins { + function = "spi_cs2"; + pins = "gpio28"; + }; + + pinctrl_spi_cs3: spi_cs3-pins { + function = "spi_cs3"; + pins = "gpio29"; + }; + + pinctrl_spi_cs4: spi_cs4-pins { + function = "spi_cs4"; + pins = "gpio30"; + }; + + pinctrl_spi_cs5: spi_cs5-pins { + function = "spi_cs5"; + pins = "gpio31"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + group = "uart1_grp"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/tango-nand.txt b/Documentation/devicetree/bindings/mtd/tango-nand.txt deleted file mode 100644 index 91c8420241af..000000000000 --- a/Documentation/devicetree/bindings/mtd/tango-nand.txt +++ /dev/null @@ -1,38 +0,0 @@ -Sigma Designs Tango4 NAND Flash Controller (NFC) - -Required properties: - -- compatible: "sigma,smp8758-nand" -- reg: address/size of nfc_reg, nfc_mem, and pbus_reg -- dmas: reference to the DMA channel used by the controller -- dma-names: "rxtx" -- clocks: reference to the system clock -- #address-cells: <1> -- #size-cells: <0> - -Children nodes represent the available NAND chips. -See Documentation/devicetree/bindings/mtd/nand-controller.yaml for generic bindings. - -Example: - - nandc: nand-controller@2c000 { - compatible = "sigma,smp8758-nand"; - reg = <0x2c000 0x30>, <0x2d000 0x800>, <0x20000 0x1000>; - dmas = <&dma0 3>; - dma-names = "rxtx"; - clocks = <&clkgen SYS_CLK>; - #address-cells = <1>; - #size-cells = <0>; - - nand@0 { - reg = <0>; /* CS0 */ - nand-ecc-strength = <14>; - nand-ecc-step-size = <1024>; - }; - - nand@1 { - reg = <1>; /* CS1 */ - nand-ecc-strength = <14>; - nand-ecc-step-size = <1024>; - }; - }; diff --git a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml index fe72a5598add..005868f703a6 100644 --- a/Documentation/devicetree/bindings/net/renesas,etheravb.yaml +++ b/Documentation/devicetree/bindings/net/renesas,etheravb.yaml @@ -51,12 +51,12 @@ properties: clocks: minItems: 1 - maxItems: 2 items: - description: AVB functional clock - description: Optional TXC reference clock clock-names: + minItems: 1 items: - const: fck - const: refclk diff --git a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt b/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt deleted file mode 100644 index d6796ef54ea1..000000000000 --- a/Documentation/devicetree/bindings/pci/hisilicon-pcie.txt +++ /dev/null @@ -1,43 +0,0 @@ -HiSilicon Hip05 and Hip06 PCIe host bridge DT description - -HiSilicon PCIe host controller is based on the Synopsys DesignWare PCI core. -It shares common functions with the PCIe DesignWare core driver and inherits -common properties defined in -Documentation/devicetree/bindings/pci/designware-pcie.txt. - -Additional properties are described here: - -Required properties -- compatible: Should contain "hisilicon,hip05-pcie" or "hisilicon,hip06-pcie". -- reg: Should contain rc_dbi, config registers location and length. -- reg-names: Must include the following entries: - "rc_dbi": controller configuration registers; - "config": PCIe configuration space registers. -- msi-parent: Should be its_pcie which is an ITS receiving MSI interrupts. -- port-id: Should be 0, 1, 2 or 3. - -Optional properties: -- status: Either "ok" or "disabled". -- dma-coherent: Present if DMA operations are coherent. - -Hip05 Example (note that Hip06 is the same except compatible): - pcie@b0080000 { - compatible = "hisilicon,hip05-pcie", "snps,dw-pcie"; - reg = <0 0xb0080000 0 0x10000>, <0x220 0x00000000 0 0x2000>; - reg-names = "rc_dbi", "config"; - bus-range = <0 15>; - msi-parent = <&its_pcie>; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - ranges = <0x82000000 0 0x00000000 0x220 0x00000000 0 0x10000000>; - num-lanes = <8>; - port-id = <1>; - #interrupt-cells = <1>; - interrupt-map-mask = <0xf800 0 0 7>; - interrupt-map = <0x0 0 0 1 &mbigen_pcie 1 10 - 0x0 0 0 2 &mbigen_pcie 2 11 - 0x0 0 0 3 &mbigen_pcie 3 12 - 0x0 0 0 4 &mbigen_pcie 4 13>; - }; diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml new file mode 100644 index 000000000000..e7b1f9892da4 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml @@ -0,0 +1,181 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/mediatek-pcie-gen3.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Gen3 PCIe controller on MediaTek SoCs + +maintainers: + - Jianjun Wang <jianjun.wang@mediatek.com> + +description: |+ + PCIe Gen3 MAC controller for MediaTek SoCs, it supports Gen3 speed + and compatible with Gen2, Gen1 speed. + + This PCIe controller supports up to 256 MSI vectors, the MSI hardware + block diagram is as follows: + + +-----+ + | GIC | + +-----+ + ^ + | + port->irq + | + +-+-+-+-+-+-+-+-+ + |0|1|2|3|4|5|6|7| (PCIe intc) + +-+-+-+-+-+-+-+-+ + ^ ^ ^ + | | ... | + +-------+ +------+ +-----------+ + | | | + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ + |0|1|...|30|31| |0|1|...|30|31| |0|1|...|30|31| (MSI sets) + +-+-+---+--+--+ +-+-+---+--+--+ +-+-+---+--+--+ + ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ ^ + | | | | | | | | | | | | (MSI vectors) + | | | | | | | | | | | | + + (MSI SET0) (MSI SET1) ... (MSI SET7) + + With 256 MSI vectors supported, the MSI vectors are composed of 8 sets, + each set has its own address for MSI message, and supports 32 MSI vectors + to generate interrupt. + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: mediatek,mt8192-pcie + + reg: + maxItems: 1 + + reg-names: + items: + - const: pcie-mac + + interrupts: + maxItems: 1 + + ranges: + minItems: 1 + maxItems: 8 + + resets: + minItems: 1 + maxItems: 2 + + reset-names: + minItems: 1 + maxItems: 2 + items: + - const: phy + - const: mac + + clocks: + maxItems: 6 + + clock-names: + items: + - const: pl_250m + - const: tl_26m + - const: tl_96m + - const: tl_32k + - const: peri_26m + - const: top_133m + + assigned-clocks: + maxItems: 1 + + assigned-clock-parents: + maxItems: 1 + + phys: + maxItems: 1 + + '#interrupt-cells': + const: 1 + + interrupt-controller: + description: Interrupt controller node for handling legacy PCI interrupts. + type: object + properties: + '#address-cells': + const: 0 + '#interrupt-cells': + const: 1 + interrupt-controller: true + + required: + - '#address-cells' + - '#interrupt-cells' + - interrupt-controller + + additionalProperties: false + +required: + - compatible + - reg + - reg-names + - interrupts + - ranges + - clocks + - '#interrupt-cells' + - interrupt-controller + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + pcie: pcie@11230000 { + compatible = "mediatek,mt8192-pcie"; + device_type = "pci"; + #address-cells = <3>; + #size-cells = <2>; + reg = <0x00 0x11230000 0x00 0x4000>; + reg-names = "pcie-mac"; + interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH 0>; + bus-range = <0x00 0xff>; + ranges = <0x82000000 0x00 0x12000000 0x00 + 0x12000000 0x00 0x1000000>; + clocks = <&infracfg 44>, + <&infracfg 40>, + <&infracfg 43>, + <&infracfg 97>, + <&infracfg 99>, + <&infracfg 111>; + clock-names = "pl_250m", "tl_26m", "tl_96m", + "tl_32k", "peri_26m", "top_133m"; + assigned-clocks = <&topckgen 50>; + assigned-clock-parents = <&topckgen 91>; + + phys = <&pciephy>; + phy-names = "pcie-phy"; + + resets = <&infracfg_rst 2>, + <&infracfg_rst 3>; + reset-names = "phy", "mac"; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0x7>; + interrupt-map = <0 0 0 1 &pcie_intc 0>, + <0 0 0 2 &pcie_intc 1>, + <0 0 0 3 &pcie_intc 2>, + <0 0 0 4 &pcie_intc 3>; + pcie_intc: interrupt-controller { + #address-cells = <0>; + #interrupt-cells = <1>; + interrupt-controller; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml index 4a2bcc0158e2..8fdfbc763d70 100644 --- a/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/rcar-pci-host.yaml @@ -17,6 +17,7 @@ allOf: properties: compatible: oneOf: + - const: renesas,pcie-r8a7779 # R-Car H1 - items: - enum: - renesas,pcie-r8a7742 # RZ/G1H @@ -74,7 +75,16 @@ required: - clocks - clock-names - power-domains - - resets + +if: + not: + properties: + compatible: + contains: + const: renesas,pcie-r8a7779 +then: + required: + - resets unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml new file mode 100644 index 000000000000..b03cbb9b6602 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/sifive,fu740-pcie.yaml @@ -0,0 +1,113 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/sifive,fu740-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: SiFive FU740 PCIe host controller + +description: |+ + SiFive FU740 PCIe host controller is based on the Synopsys DesignWare + PCI core. It shares common features with the PCIe DesignWare core and + inherits common properties defined in + Documentation/devicetree/bindings/pci/designware-pcie.txt. + +maintainers: + - Paul Walmsley <paul.walmsley@sifive.com> + - Greentime Hu <greentime.hu@sifive.com> + +allOf: + - $ref: /schemas/pci/pci-bus.yaml# + +properties: + compatible: + const: sifive,fu740-pcie + + reg: + maxItems: 3 + + reg-names: + items: + - const: dbi + - const: config + - const: mgmt + + num-lanes: + const: 8 + + msi-parent: true + + interrupt-names: + items: + - const: msi + - const: inta + - const: intb + - const: intc + - const: intd + + resets: + description: A phandle to the PCIe power up reset line. + maxItems: 1 + + pwren-gpios: + description: Should specify the GPIO for controlling the PCI bus device power on. + maxItems: 1 + + reset-gpios: + maxItems: 1 + +required: + - dma-coherent + - num-lanes + - interrupts + - interrupt-names + - interrupt-parent + - interrupt-map-mask + - interrupt-map + - clock-names + - clocks + - resets + - pwren-gpios + - reset-gpios + +unevaluatedProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + #include <dt-bindings/clock/sifive-fu740-prci.h> + + pcie@e00000000 { + compatible = "sifive,fu740-pcie"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + reg = <0xe 0x00000000 0x0 0x80000000>, + <0xd 0xf0000000 0x0 0x10000000>, + <0x0 0x100d0000 0x0 0x1000>; + reg-names = "dbi", "config", "mgmt"; + device_type = "pci"; + dma-coherent; + bus-range = <0x0 0xff>; + ranges = <0x81000000 0x0 0x60080000 0x0 0x60080000 0x0 0x10000>, /* I/O */ + <0x82000000 0x0 0x60090000 0x0 0x60090000 0x0 0xff70000>, /* mem */ + <0x82000000 0x0 0x70000000 0x0 0x70000000 0x0 0x1000000>, /* mem */ + <0xc3000000 0x20 0x00000000 0x20 0x00000000 0x20 0x00000000>; /* mem prefetchable */ + num-lanes = <0x8>; + interrupts = <56>, <57>, <58>, <59>, <60>, <61>, <62>, <63>, <64>; + interrupt-names = "msi", "inta", "intb", "intc", "intd"; + interrupt-parent = <&plic0>; + interrupt-map-mask = <0x0 0x0 0x0 0x7>; + interrupt-map = <0x0 0x0 0x0 0x1 &plic0 57>, + <0x0 0x0 0x0 0x2 &plic0 58>, + <0x0 0x0 0x0 0x3 &plic0 59>, + <0x0 0x0 0x0 0x4 &plic0 60>; + clock-names = "pcie_aux"; + clocks = <&prci PRCI_CLK_PCIE_AUX>; + resets = <&prci 4>; + pwren-gpios = <&gpio 5 0>; + reset-gpios = <&gpio 8 0>; + }; + }; diff --git a/Documentation/devicetree/bindings/pci/tango-pcie.txt b/Documentation/devicetree/bindings/pci/tango-pcie.txt deleted file mode 100644 index 244683836a79..000000000000 --- a/Documentation/devicetree/bindings/pci/tango-pcie.txt +++ /dev/null @@ -1,29 +0,0 @@ -Sigma Designs Tango PCIe controller - -Required properties: - -- compatible: "sigma,smp8759-pcie" -- reg: address/size of PCI configuration space, address/size of register area -- bus-range: defined by size of PCI configuration space -- device_type: "pci" -- #size-cells: <2> -- #address-cells: <3> -- msi-controller -- ranges: translation from system to bus addresses -- interrupts: spec for misc interrupts, spec for MSI - -Example: - - pcie@2e000 { - compatible = "sigma,smp8759-pcie"; - reg = <0x50000000 0x400000>, <0x2e000 0x100>; - bus-range = <0 3>; - device_type = "pci"; - #size-cells = <2>; - #address-cells = <3>; - msi-controller; - ranges = <0x02000000 0x0 0x00400000 0x50400000 0x0 0x3c00000>; - interrupts = - <54 IRQ_TYPE_LEVEL_HIGH>, /* misc interrupts */ - <55 IRQ_TYPE_LEVEL_HIGH>; /* MSI */ - }; diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml index d06f0c4464c6..aed437dac363 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.yaml @@ -16,12 +16,14 @@ allOf: properties: compatible: oneOf: - - description: PCIe EP controller in J7200 + - const: ti,j721e-pcie-ep + - description: PCIe EP controller in AM64 items: - - const: ti,j7200-pcie-ep + - const: ti,am64-pcie-ep - const: ti,j721e-pcie-ep - - description: PCIe EP controller in J721E + - description: PCIe EP controller in J7200 items: + - const: ti,j7200-pcie-ep - const: ti,j721e-pcie-ep reg: @@ -66,7 +68,6 @@ required: - power-domains - clocks - clock-names - - dma-coherent - max-functions - phys - phy-names diff --git a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml index 0880a613ece6..cc900202df29 100644 --- a/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml +++ b/Documentation/devicetree/bindings/pci/ti,j721e-pci-host.yaml @@ -16,12 +16,14 @@ allOf: properties: compatible: oneOf: - - description: PCIe controller in J7200 + - const: ti,j721e-pcie-host + - description: PCIe controller in AM64 items: - - const: ti,j7200-pcie-host + - const: ti,am64-pcie-host - const: ti,j721e-pcie-host - - description: PCIe controller in J721E + - description: PCIe controller in J7200 items: + - const: ti,j7200-pcie-host - const: ti,j721e-pcie-host reg: @@ -46,12 +48,17 @@ properties: maxItems: 1 clocks: - maxItems: 1 - description: clock-specifier to represent input to the PCIe + minItems: 1 + maxItems: 2 + description: |+ + clock-specifier to represent input to the PCIe for 1 item. + 2nd item if present represents reference clock to the connector. clock-names: + minItems: 1 items: - const: fck + - const: pcie_refclk vendor-id: const: 0x104c @@ -62,6 +69,8 @@ properties: - const: 0xb00d - items: - const: 0xb00f + - items: + - const: 0xb010 msi-map: true @@ -78,7 +87,6 @@ required: - vendor-id - device-id - msi-map - - dma-coherent - dma-ranges - ranges - reset-gpios diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt index 01bf7fdf4c19..2d677e90a7e2 100644 --- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt +++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt @@ -33,6 +33,8 @@ Required properties: - #address-cells: specifies the number of cells needed to encode an address. The value must be 0. +Optional properties: +- dma-coherent: present if DMA operations are coherent Example: ++++++++ diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml new file mode 100644 index 000000000000..08995a4f854b --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6318-pinctrl.yaml @@ -0,0 +1,143 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6318-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6318 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Bindings for Broadcom's BCM6318 memory-mapped pin controller. + +properties: + compatible: + const: brcm,bcm6318-pinctrl + + reg: + maxItems: 2 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ ephy0_spd_led, ephy1_spd_led, ephy2_spd_led, ephy3_spd_led, + ephy0_act_led, ephy1_act_led, ephy2_act_led, ephy3_act_led, + serial_led_data, serial_led_clk, inet_act_led, inet_fail_led, + dsl_led, post_fail_led, wlan_wps_led, usb_pwron, + usb_device_led, usb_active ] + + pins: + enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, + gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio40 ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@18 { + compatible = "brcm,bcm6318-pinctrl"; + reg = <0x18 0x10>, <0x54 0x18>; + + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { + function = "ephy0_spd_led"; + pins = "gpio0"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { + function = "ephy1_spd_led"; + pins = "gpio1"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { + function = "ephy2_spd_led"; + pins = "gpio2"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { + function = "ephy3_spd_led"; + pins = "gpio3"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led-pins { + function = "ephy0_act_led"; + pins = "gpio4"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led-pins { + function = "ephy1_act_led"; + pins = "gpio5"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led-pins { + function = "ephy2_act_led"; + pins = "gpio6"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led-pins { + function = "ephy3_act_led"; + pins = "gpio7"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led-pins { + function = "inet_act_led"; + pins = "gpio8"; + }; + + pinctrl_inet_fail_led: inet_fail_led-pins { + function = "inet_fail_led"; + pins = "gpio9"; + }; + + pinctrl_dsl_led: dsl_led-pins { + function = "dsl_led"; + pins = "gpio10"; + }; + + pinctrl_post_fail_led: post_fail_led-pins { + function = "post_fail_led"; + pins = "gpio11"; + }; + + pinctrl_wlan_wps_led: wlan_wps_led-pins { + function = "wlan_wps_led"; + pins = "gpio12"; + }; + + pinctrl_usb_pwron: usb_pwron-pins { + function = "usb_pwron"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio13"; + }; + + pinctrl_usb_active: usb_active-pins { + function = "usb_active"; + pins = "gpio40"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml new file mode 100644 index 000000000000..58ffed44b3c4 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm63268-pinctrl.yaml @@ -0,0 +1,164 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm63268-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM63268 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Bindings for Broadcom's BCM63268 memory-mapped pin controller. + +properties: + compatible: + const: brcm,bcm63268-pinctrl + + reg: + maxItems: 3 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ serial_led_clk, serial_led_data, hsspi_cs4, hsspi_cs5, + hsspi_cs6, hsspi_cs7, adsl_spi_miso, adsl_spi_mosi, + vreq_clk, pcie_clkreq_b, robosw_led_clk, robosw_led_data, + nand, gpio35_alt, dectpd, vdsl_phy_override_0, + vdsl_phy_override_1, vdsl_phy_override_2, + vdsl_phy_override_3, dsl_gpio8, dsl_gpio9 ] + + pins: + enum: [ gpio0, gpio1, gpio16, gpio17, gpio8, gpio9, gpio18, gpio19, + gpio22, gpio23, gpio30, gpio31, nand_grp, gpio35 + dectpd_grp, vdsl_phy_override_0_grp, + vdsl_phy_override_1_grp, vdsl_phy_override_2_grp, + vdsl_phy_override_3_grp, dsl_gpio8, dsl_gpio9 ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@10 { + compatible = "brcm,bcm63268-pinctrl"; + reg = <0x10 0x4>, <0x18 0x8>, <0x38 0x4>; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio0"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio1"; + }; + }; + + pinctrl_hsspi_cs4: hsspi_cs4-pins { + function = "hsspi_cs4"; + pins = "gpio16"; + }; + + pinctrl_hsspi_cs5: hsspi_cs5-pins { + function = "hsspi_cs5"; + pins = "gpio17"; + }; + + pinctrl_hsspi_cs6: hsspi_cs6-pins { + function = "hsspi_cs6"; + pins = "gpio8"; + }; + + pinctrl_hsspi_cs7: hsspi_cs7-pins { + function = "hsspi_cs7"; + pins = "gpio9"; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio19"; + }; + }; + + pinctrl_vreq_clk: vreq_clk-pins { + function = "vreq_clk"; + pins = "gpio22"; + }; + + pinctrl_pcie_clkreq_b: pcie_clkreq_b-pins { + function = "pcie_clkreq_b"; + pins = "gpio23"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio30"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio31"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + group = "nand_grp"; + }; + + pinctrl_gpio35_alt: gpio35_alt-pins { + function = "gpio35_alt"; + pin = "gpio35"; + }; + + pinctrl_dectpd: dectpd-pins { + function = "dectpd"; + group = "dectpd_grp"; + }; + + pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { + function = "vdsl_phy_override_0"; + group = "vdsl_phy_override_0_grp"; + }; + + pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { + function = "vdsl_phy_override_1"; + group = "vdsl_phy_override_1_grp"; + }; + + pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { + function = "vdsl_phy_override_2"; + group = "vdsl_phy_override_2_grp"; + }; + + pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { + function = "vdsl_phy_override_3"; + group = "vdsl_phy_override_3_grp"; + }; + + pinctrl_dsl_gpio8: dsl_gpio8-pins { + function = "dsl_gpio8"; + group = "dsl_gpio8"; + }; + + pinctrl_dsl_gpio9: dsl_gpio9-pins { + function = "dsl_gpio9"; + group = "dsl_gpio9"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml new file mode 100644 index 000000000000..0fd24f40afb1 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6328-pinctrl.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6328-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6328 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Bindings for Broadcom's BCM6328 memory-mapped pin controller. + +properties: + compatible: + const: brcm,bcm6328-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ serial_led_data, serial_led_clk, inet_act_led, pcie_clkreq, + led, ephy0_act_led, ephy1_act_led, ephy2_act_led, + ephy3_act_led, hsspi_cs1, usb_device_port, usb_host_port ] + + pins: + enum: [ gpio6, gpio7, gpio11, gpio16, gpio17, gpio18, gpio19, + gpio20, gpio25, gpio26, gpio27, gpio28, hsspi_cs1, + usb_port1 ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@18 { + compatible = "brcm,bcm6328-pinctrl"; + reg = <0x18 0x10>; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio6"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio7"; + }; + }; + + pinctrl_inet_act_led: inet_act_led-pins { + function = "inet_act_led"; + pins = "gpio11"; + }; + + pinctrl_pcie_clkreq: pcie_clkreq-pins { + function = "pcie_clkreq"; + pins = "gpio16"; + }; + + pinctrl_ephy0_spd_led: ephy0_spd_led-pins { + function = "led"; + pins = "gpio17"; + }; + + pinctrl_ephy1_spd_led: ephy1_spd_led-pins { + function = "led"; + pins = "gpio18"; + }; + + pinctrl_ephy2_spd_led: ephy2_spd_led-pins { + function = "led"; + pins = "gpio19"; + }; + + pinctrl_ephy3_spd_led: ephy3_spd_led-pins { + function = "led"; + pins = "gpio20"; + }; + + pinctrl_ephy0_act_led: ephy0_act_led-pins { + function = "ephy0_act_led"; + pins = "gpio25"; + }; + + pinctrl_ephy1_act_led: ephy1_act_led-pins { + function = "ephy1_act_led"; + pins = "gpio26"; + }; + + pinctrl_ephy2_act_led: ephy2_act_led-pins { + function = "ephy2_act_led"; + pins = "gpio27"; + }; + + pinctrl_ephy3_act_led: ephy3_act_led-pins { + function = "ephy3_act_led"; + pins = "gpio28"; + }; + + pinctrl_hsspi_cs1: hsspi_cs1-pins { + function = "hsspi_cs1"; + pins = "hsspi_cs1"; + }; + + pinctrl_usb_port1_device: usb_port1_device-pins { + function = "usb_device_port"; + pins = "usb_port1"; + }; + + pinctrl_usb_port1_host: usb_port1_host-pins { + function = "usb_host_port"; + pins = "usb_port1"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml new file mode 100644 index 000000000000..0c3ce256aa78 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6358-pinctrl.yaml @@ -0,0 +1,93 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6358-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6358 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Bindings for Broadcom's BCM6358 memory-mapped pin controller. + +properties: + compatible: + const: brcm,bcm6358-pinctrl + + reg: + maxItems: 1 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ ebi_cs, uart1, serial_led, legacy_led, led, spi_cs, utopia, + pwm_syn_clk, sys_irq ] + + pins: + enum: [ ebi_cs_grp, uart1_grp, serial_led_grp, legacy_led_grp, + led_grp, spi_cs_grp, utopia_grp, pwm_syn_clk, sys_irq_grp ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@18 { + compatible = "brcm,bcm6358-pinctrl"; + reg = <0x18 0x4>; + + pinctrl_ebi_cs: ebi_cs-pins { + function = "ebi_cs"; + groups = "ebi_cs_grp"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + groups = "uart1_grp"; + }; + + pinctrl_serial_led: serial_led-pins { + function = "serial_led"; + groups = "serial_led_grp"; + }; + + pinctrl_legacy_led: legacy_led-pins { + function = "legacy_led"; + groups = "legacy_led_grp"; + }; + + pinctrl_led: led-pins { + function = "led"; + groups = "led_grp"; + }; + + pinctrl_spi_cs_23: spi_cs-pins { + function = "spi_cs"; + groups = "spi_cs_grp"; + }; + + pinctrl_utopia: utopia-pins { + function = "utopia"; + groups = "utopia_grp"; + }; + + pinctrl_pwm_syn_clk: pwm_syn_clk-pins { + function = "pwm_syn_clk"; + groups = "pwm_syn_clk_grp"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + groups = "sys_irq_grp"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml new file mode 100644 index 000000000000..6f68fee373bd --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6362-pinctrl.yaml @@ -0,0 +1,206 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6362-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6362 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Bindings for Broadcom's BCM6362 memory-mapped pin controller. + +properties: + compatible: + const: brcm,bcm6362-pinctrl + + reg: + maxItems: 2 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ usb_device_led, sys_irq, serial_led_clk, serial_led_data, + robosw_led_data, robosw_led_clk, robosw_led0, robosw_led1, + inet_led, spi_cs2, spi_cs3, ntr_pulse, uart1_scts, + uart1_srts, uart1_sdin, uart1_sdout, adsl_spi_miso, + adsl_spi_mosi, adsl_spi_clk, adsl_spi_cs, ephy0_led, + ephy1_led, ephy2_led, ephy3_led, ext_irq0, ext_irq1, + ext_irq2, ext_irq3, nand ] + + pins: + enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, + gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, + gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21, + gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, nand_grp ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@18 { + compatible = "brcm,bcm6362-pinctrl"; + reg = <0x18 0x10>, <0x38 0x4>; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio0"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + pins = "gpio1"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio2"; + }; + + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio3"; + }; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio4"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio5"; + }; + + pinctrl_robosw_led0: robosw_led0-pins { + function = "robosw_led0"; + pins = "gpio6"; + }; + + pinctrl_robosw_led1: robosw_led1-pins { + function = "robosw_led1"; + pins = "gpio7"; + }; + + pinctrl_inet_led: inet_led-pins { + function = "inet_led"; + pins = "gpio8"; + }; + + pinctrl_spi_cs2: spi_cs2-pins { + function = "spi_cs2"; + pins = "gpio9"; + }; + + pinctrl_spi_cs3: spi_cs3-pins { + function = "spi_cs3"; + pins = "gpio10"; + }; + + pinctrl_ntr_pulse: ntr_pulse-pins { + function = "ntr_pulse"; + pins = "gpio11"; + }; + + pinctrl_uart1_scts: uart1_scts-pins { + function = "uart1_scts"; + pins = "gpio12"; + }; + + pinctrl_uart1_srts: uart1_srts-pins { + function = "uart1_srts"; + pins = "gpio13"; + }; + + pinctrl_uart1: uart1-pins { + pinctrl_uart1_sdin: uart1_sdin-pins { + function = "uart1_sdin"; + pins = "gpio14"; + }; + + pinctrl_uart1_sdout: uart1_sdout-pins { + function = "uart1_sdout"; + pins = "gpio15"; + }; + }; + + pinctrl_adsl_spi: adsl_spi-pins { + pinctrl_adsl_spi_miso: adsl_spi_miso-pins { + function = "adsl_spi_miso"; + pins = "gpio16"; + }; + + pinctrl_adsl_spi_mosi: adsl_spi_mosi-pins { + function = "adsl_spi_mosi"; + pins = "gpio17"; + }; + + pinctrl_adsl_spi_clk: adsl_spi_clk-pins { + function = "adsl_spi_clk"; + pins = "gpio18"; + }; + + pinctrl_adsl_spi_cs: adsl_spi_cs-pins { + function = "adsl_spi_cs"; + pins = "gpio19"; + }; + }; + + pinctrl_ephy0_led: ephy0_led-pins { + function = "ephy0_led"; + pins = "gpio20"; + }; + + pinctrl_ephy1_led: ephy1_led-pins { + function = "ephy1_led"; + pins = "gpio21"; + }; + + pinctrl_ephy2_led: ephy2_led-pins { + function = "ephy2_led"; + pins = "gpio22"; + }; + + pinctrl_ephy3_led: ephy3_led-pins { + function = "ephy3_led"; + pins = "gpio23"; + }; + + pinctrl_ext_irq0: ext_irq0-pins { + function = "ext_irq0"; + pins = "gpio24"; + }; + + pinctrl_ext_irq1: ext_irq1-pins { + function = "ext_irq1"; + pins = "gpio25"; + }; + + pinctrl_ext_irq2: ext_irq2-pins { + function = "ext_irq2"; + pins = "gpio26"; + }; + + pinctrl_ext_irq3: ext_irq3-pins { + function = "ext_irq3"; + pins = "gpio27"; + }; + + pinctrl_nand: nand-pins { + function = "nand"; + group = "nand_grp"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml new file mode 100644 index 000000000000..f4168b9f4460 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm6368-pinctrl.yaml @@ -0,0 +1,217 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/brcm,bcm6368-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom BCM6368 pin controller + +maintainers: + - Álvaro Fernández Rojas <noltari@gmail.com> + - Jonas Gorski <jonas.gorski@gmail.com> + +description: + Bindings for Broadcom's BCM6368 memory-mapped pin controller. + +properties: + compatible: + const: brcm,bcm6368-pinctrl + + reg: + maxItems: 2 + +patternProperties: + '-pins$': + type: object + $ref: pinmux-node.yaml# + + properties: + function: + enum: [ analog_afe_0, analog_afe_1, sys_irq, serial_led_data, + serial_led_clk, inet_led, ephy0_led, ephy1_led, ephy2_led, + ephy3_led, robosw_led_data, robosw_led_clk, robosw_led0, + robosw_led1, usb_device_led, pci_req1, pci_gnt1, pci_intb, + pci_req0, pci_gnt0, pcmcia_cd1, pcmcia_cd2, pcmcia_vs1, + pcmcia_vs2, ebi_cs2, ebi_cs3, spi_cs2, spi_cs3, spi_cs4, + spi_cs5, uart1 ] + + pins: + enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7, + gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14, + gpio16, gpio17, gpio18, gpio19, gpio20, gpio22, gpio23, + gpio24, gpio25, gpio26, gpio27, gpio28, gpio29, gpio30, + gpio31, uart1_grp ] + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + pinctrl@18 { + compatible = "brcm,bcm6368-pinctrl"; + reg = <0x18 0x4>, <0x38 0x4>; + + pinctrl_analog_afe_0: analog_afe_0-pins { + function = "analog_afe_0"; + pins = "gpio0"; + }; + + pinctrl_analog_afe_1: analog_afe_1-pins { + function = "analog_afe_1"; + pins = "gpio1"; + }; + + pinctrl_sys_irq: sys_irq-pins { + function = "sys_irq"; + pins = "gpio2"; + }; + + pinctrl_serial_led: serial_led-pins { + pinctrl_serial_led_data: serial_led_data-pins { + function = "serial_led_data"; + pins = "gpio3"; + }; + + pinctrl_serial_led_clk: serial_led_clk-pins { + function = "serial_led_clk"; + pins = "gpio4"; + }; + }; + + pinctrl_inet_led: inet_led-pins { + function = "inet_led"; + pins = "gpio5"; + }; + + pinctrl_ephy0_led: ephy0_led-pins { + function = "ephy0_led"; + pins = "gpio6"; + }; + + pinctrl_ephy1_led: ephy1_led-pins { + function = "ephy1_led"; + pins = "gpio7"; + }; + + pinctrl_ephy2_led: ephy2_led-pins { + function = "ephy2_led"; + pins = "gpio8"; + }; + + pinctrl_ephy3_led: ephy3_led-pins { + function = "ephy3_led"; + pins = "gpio9"; + }; + + pinctrl_robosw_led_data: robosw_led_data-pins { + function = "robosw_led_data"; + pins = "gpio10"; + }; + + pinctrl_robosw_led_clk: robosw_led_clk-pins { + function = "robosw_led_clk"; + pins = "gpio11"; + }; + + pinctrl_robosw_led0: robosw_led0-pins { + function = "robosw_led0"; + pins = "gpio12"; + }; + + pinctrl_robosw_led1: robosw_led1-pins { + function = "robosw_led1"; + pins = "gpio13"; + }; + + pinctrl_usb_device_led: usb_device_led-pins { + function = "usb_device_led"; + pins = "gpio14"; + }; + + pinctrl_pci: pci-pins { + pinctrl_pci_req1: pci_req1-pins { + function = "pci_req1"; + pins = "gpio16"; + }; + + pinctrl_pci_gnt1: pci_gnt1-pins { + function = "pci_gnt1"; + pins = "gpio17"; + }; + + pinctrl_pci_intb: pci_intb-pins { + function = "pci_intb"; + pins = "gpio18"; + }; + + pinctrl_pci_req0: pci_req0-pins { + function = "pci_req0"; + pins = "gpio19"; + }; + + pinctrl_pci_gnt0: pci_gnt0-pins { + function = "pci_gnt0"; + pins = "gpio20"; + }; + }; + + pinctrl_pcmcia: pcmcia-pins { + pinctrl_pcmcia_cd1: pcmcia_cd1-pins { + function = "pcmcia_cd1"; + pins = "gpio22"; + }; + + pinctrl_pcmcia_cd2: pcmcia_cd2-pins { + function = "pcmcia_cd2"; + pins = "gpio23"; + }; + + pinctrl_pcmcia_vs1: pcmcia_vs1-pins { + function = "pcmcia_vs1"; + pins = "gpio24"; + }; + + pinctrl_pcmcia_vs2: pcmcia_vs2-pins { + function = "pcmcia_vs2"; + pins = "gpio25"; + }; + }; + + pinctrl_ebi_cs2: ebi_cs2-pins { + function = "ebi_cs2"; + pins = "gpio26"; + }; + + pinctrl_ebi_cs3: ebi_cs3-pins { + function = "ebi_cs3"; + pins = "gpio27"; + }; + + pinctrl_spi_cs2: spi_cs2-pins { + function = "spi_cs2"; + pins = "gpio28"; + }; + + pinctrl_spi_cs3: spi_cs3-pins { + function = "spi_cs3"; + pins = "gpio29"; + }; + + pinctrl_spi_cs4: spi_cs4-pins { + function = "spi_cs4"; + pins = "gpio30"; + }; + + pinctrl_spi_cs5: spi_cs5-pins { + function = "spi_cs5"; + pins = "gpio31"; + }; + + pinctrl_uart1: uart1-pins { + function = "uart1"; + group = "uart1_grp"; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml index 44c04d11ae4c..a4846d78111c 100644 --- a/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/ingenic,pinctrl.yaml @@ -17,10 +17,12 @@ description: > naming scheme "PxN" where x is a character identifying the GPIO port with which the pin is associated and N is an integer from 0 to 31 identifying the pin within that GPIO port. For example PA0 is the first pin in GPIO port A, - and PB31 is the last pin in GPIO port B. The JZ4740, the X1000 and the X1830 - contains 4 GPIO ports, PA to PD, for a total of 128 pins. The JZ4760, the - JZ4770 and the JZ4780 contains 6 GPIO ports, PA to PF, for a total of 192 - pins. + and PB31 is the last pin in GPIO port B. The JZ4730, the JZ4740, the JZ4725B, + the X1000 and the X1830 contains 4 GPIO ports, PA to PD, for a total of 128 + pins. The X2000 contains 5 GPIO ports, PA to PE, for a total of 160 pins. + The JZ4750, the JZ4755 the JZ4760, the JZ4770 and the JZ4780 contains 6 GPIO + ports, PA to PF, for a total of 192 pins. The JZ4775 contains 7 GPIO ports, + PA to PG, for a total of 224 pins. maintainers: - Paul Cercueil <paul@crapouillou.net> @@ -32,20 +34,28 @@ properties: compatible: oneOf: - enum: + - ingenic,jz4730-pinctrl - ingenic,jz4740-pinctrl - ingenic,jz4725b-pinctrl + - ingenic,jz4750-pinctrl + - ingenic,jz4755-pinctrl - ingenic,jz4760-pinctrl - ingenic,jz4770-pinctrl + - ingenic,jz4775-pinctrl - ingenic,jz4780-pinctrl - ingenic,x1000-pinctrl - ingenic,x1500-pinctrl - ingenic,x1830-pinctrl + - ingenic,x2000-pinctrl - items: - const: ingenic,jz4760b-pinctrl - const: ingenic,jz4760-pinctrl - items: - const: ingenic,x1000e-pinctrl - const: ingenic,x1000-pinctrl + - items: + - const: ingenic,x2000e-pinctrl + - const: ingenic,x2000-pinctrl reg: maxItems: 1 @@ -62,14 +72,19 @@ patternProperties: properties: compatible: enum: + - ingenic,jz4730-gpio - ingenic,jz4740-gpio - ingenic,jz4725b-gpio + - ingenic,jz4750-gpio + - ingenic,jz4755-gpio - ingenic,jz4760-gpio - ingenic,jz4770-gpio + - ingenic,jz4775-gpio - ingenic,jz4780-gpio - ingenic,x1000-gpio - ingenic,x1500-gpio - ingenic,x1830-gpio + - ingenic,x2000-gpio reg: items: diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml new file mode 100644 index 000000000000..2f12ec59eee5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml @@ -0,0 +1,151 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/pinctrl-mt8195.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Mediatek MT8195 Pin Controller + +maintainers: + - Sean Wang <sean.wang@mediatek.com> + +description: | + The Mediatek's Pin controller is used to control SoC pins. + +properties: + compatible: + const: mediatek,mt8195-pinctrl + + gpio-controller: true + + '#gpio-cells': + description: | + Number of cells in GPIO specifier. Since the generic GPIO binding is used, + the amount of cells must be specified as 2. See the below + mentioned gpio binding representation for description of particular cells. + const: 2 + + gpio-ranges: + description: gpio valid number range. + maxItems: 1 + + reg: + description: | + Physical address base for gpio base registers. There are 8 GPIO + physical address base in mt8195. + maxItems: 8 + + reg-names: + description: | + Gpio base register names. + maxItems: 8 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + description: The interrupt outputs to sysirq. + maxItems: 1 + +#PIN CONFIGURATION NODES +patternProperties: + '-pins$': + type: object + description: | + A pinctrl node should contain at least one subnodes representing the + pinctrl groups available on the machine. Each subnode will list the + pins it needs, and how they should be configured, with regard to muxer + configuration, pullups, drive strength, input enable/disable and + input schmitt. + An example of using macro: + pincontroller { + /* GPIO0 set as multifunction GPIO0 */ + gpio_pin { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + }; + /* GPIO8 set as multifunction SDA0 */ + i2c0_pin { + pinmux = <PINMUX_GPIO8__FUNC_SDA0>; + }; + }; + $ref: "pinmux-node.yaml" + + properties: + pinmux: + description: | + Integer array, represents gpio pin number and mux setting. + Supported pin number and mux varies for different SoCs, and are defined + as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. + + drive-strength: + description: | + It can support some arguments which is from 0 to 7. It can only support + 2/4/6/8/10/12/14/16mA in mt8195. + enum: [0, 1, 2, 3, 4, 5, 6, 7] + + bias-pull-down: true + + bias-pull-up: true + + bias-disable: true + + output-high: true + + output-low: true + + input-enable: true + + input-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + required: + - pinmux + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - gpio-ranges + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/mt8195-pinfunc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + pio: pinctrl@10005000 { + compatible = "mediatek,mt8195-pinctrl"; + reg = <0x10005000 0x1000>, + <0x11d10000 0x1000>, + <0x11d30000 0x1000>, + <0x11d40000 0x1000>, + <0x11e20000 0x1000>, + <0x11eb0000 0x1000>, + <0x11f40000 0x1000>, + <0x1000b000 0x1000>; + reg-names = "iocfg0", "iocfg_bm", "iocfg_bl", + "iocfg_br", "iocfg_lm", "iocfg_rb", + "iocfg_tl", "eint"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pio 0 0 144>; + interrupt-controller; + interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH 0>; + #interrupt-cells = <2>; + + pio-pins { + pinmux = <PINMUX_GPIO0__FUNC_GPIO0>; + output-low; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt index 7648ab00f4e2..f6a9760558a6 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt @@ -27,8 +27,15 @@ PMIC's from Qualcomm. "qcom,pm660l-gpio" "qcom,pm8150-gpio" "qcom,pm8150b-gpio" + "qcom,pm8350-gpio" + "qcom,pm8350b-gpio" + "qcom,pm8350c-gpio" + "qcom,pmk8350-gpio" + "qcom,pmr735a-gpio" + "qcom,pmr735b-gpio" "qcom,pm6150-gpio" "qcom,pm6150l-gpio" + "qcom,pm8008-gpio" "qcom,pmx55-gpio" And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio" @@ -109,8 +116,15 @@ to specify in a pin configuration subnode: and gpio8) gpio1-gpio12 for pm8150b (holes on gpio3, gpio4, gpio7) gpio1-gpio12 for pm8150l (hole on gpio7) + gpio1-gpio10 for pm8350 + gpio1-gpio8 for pm8350b + gpio1-gpio9 for pm8350c + gpio1-gpio4 for pmk8350 + gpio1-gpio4 for pmr735a + gpio1-gpio4 for pmr735b gpio1-gpio10 for pm6150 gpio1-gpio12 for pm6150l + gpio1-gpio2 for pm8008 gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10 and gpio11) diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index d3eae61a340d..84c4111293bd 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -33,6 +33,7 @@ Required properties for iomux controller: "rockchip,rk3328-pinctrl": for Rockchip RK3328 "rockchip,rk3368-pinctrl": for Rockchip RK3368 "rockchip,rk3399-pinctrl": for Rockchip RK3399 + "rockchip,rk3568-pinctrl": for Rockchip RK3568 - rockchip,grf: phandle referencing a syscon providing the "general register files" @@ -50,23 +51,7 @@ Deprecated properties for iomux controller: Use rockchip,grf and rockchip,pmu described above instead. Required properties for gpio sub nodes: - - compatible: "rockchip,gpio-bank" - - reg: register of the gpio bank (different than the iomux registerset) - - interrupts: base interrupt of the gpio bank in the interrupt controller - - clocks: clock that drives this bank - - gpio-controller: identifies the node as a gpio controller and pin bank. - - #gpio-cells: number of cells in GPIO specifier. Since the generic GPIO - binding is used, the amount of cells must be specified as 2. See generic - GPIO binding documentation for description of particular cells. - - interrupt-controller: identifies the controller node as interrupt-parent. - - #interrupt-cells: the value of this property should be 2 and the interrupt - cells should use the standard two-cell scheme described in - bindings/interrupt-controller/interrupts.txt - -Deprecated properties for gpio sub nodes: - - compatible: "rockchip,rk3188-gpio-bank0" - - reg: second element: separate pull register for rk3188 bank0, use - rockchip,pmu described above instead +See rockchip,gpio-bank.yaml Required properties for pin configuration node: - rockchip,pins: 3 integers array, represents a group of pins mux and config @@ -127,43 +112,3 @@ uart2: serial@20064000 { pinctrl-names = "default"; pinctrl-0 = <&uart2_xfer>; }; - -Example for rk3188: - - pinctrl@20008000 { - compatible = "rockchip,rk3188-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmu>; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - gpio0: gpio0@2000a000 { - compatible = "rockchip,rk3188-gpio-bank0"; - reg = <0x2000a000 0x100>; - interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 9>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio1@2003c000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2003c000 0x100>; - interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clk_gates8 10>; - - gpio-controller; - #gpio-cells = <2>; - - interrupt-controller; - #interrupt-cells = <2>; - }; - - ... - - }; diff --git a/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml new file mode 100644 index 000000000000..8ef0d07d35fe --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/xlnx,zynqmp-pinctrl.yaml @@ -0,0 +1,336 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/xlnx,zynqmp-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx ZynqMP Pinctrl + +maintainers: + - Sai Krishna Potthuri <lakshmi.sai.krishna.potthuri@xilinx.com> + - Rajan Vaja <rajan.vaja@xilinx.com> + +description: | + Please refer to pinctrl-bindings.txt in this directory for details of the + common pinctrl bindings used by client devices, including the meaning of the + phrase "pin configuration node". + + ZynqMP's pin configuration nodes act as a container for an arbitrary number of + subnodes. Each of these subnodes represents some desired configuration for a + pin, a group, or a list of pins or groups. This configuration can include the + mux function to select on those pin(s)/group(s), and various pin configuration + parameters, such as pull-up, slew rate, etc. + + Each configuration node can consist of multiple nodes describing the pinmux and + pinconf options. Those nodes can be pinmux nodes or pinconf nodes. + + The name of each subnode is not important; all subnodes should be enumerated + and processed purely based on their content. + +properties: + compatible: + const: xlnx,zynqmp-pinctrl + +patternProperties: + '^(.*-)?(default|gpio)$': + type: object + patternProperties: + '^mux': + type: object + description: + Pinctrl node's client devices use subnodes for pin muxes, + which in turn use below standard properties. + $ref: pinmux-node.yaml# + + properties: + groups: + description: + List of groups to select (either this or "pins" must be + specified), available groups for this subnode. + items: + enum: [ethernet0_0_grp, ethernet1_0_grp, ethernet2_0_grp, + ethernet3_0_grp, gemtsu0_0_grp, gemtsu0_1_grp, + gemtsu0_2_grp, mdio0_0_grp, mdio1_0_grp, + mdio1_1_grp, mdio2_0_grp, mdio3_0_grp, + qspi0_0_grp, qspi_ss_0_grp, qspi_fbclk_0_grp, + spi0_0_grp, spi0_ss_0_grp, spi0_ss_1_grp, + spi0_ss_2_grp, spi0_1_grp, spi0_ss_3_grp, + spi0_ss_4_grp, spi0_ss_5_grp, spi0_2_grp, + spi0_ss_6_grp, spi0_ss_7_grp, spi0_ss_8_grp, + spi0_3_grp, spi0_ss_9_grp, spi0_ss_10_grp, + spi0_ss_11_grp, spi0_4_grp, spi0_ss_12_grp, + spi0_ss_13_grp, spi0_ss_14_grp, spi0_5_grp, + spi0_ss_15_grp, spi0_ss_16_grp, spi0_ss_17_grp, + spi1_0_grp, spi1_ss_0_grp, spi1_ss_1_grp, + spi1_ss_2_grp, spi1_1_grp, spi1_ss_3_grp, + spi1_ss_4_grp, spi1_ss_5_grp, spi1_2_grp, + spi1_ss_6_grp, spi1_ss_7_grp, spi1_ss_8_grp, + spi1_3_grp, spi1_ss_9_grp, spi1_ss_10_grp, + spi1_ss_11_grp, spi1_4_grp, spi1_ss_12_grp, + spi1_ss_13_grp, spi1_ss_14_grp, spi1_5_grp, + spi1_ss_15_grp, spi1_ss_16_grp, spi1_ss_17_grp, + sdio0_0_grp, sdio0_1_grp, sdio0_2_grp, + sdio0_3_grp, sdio0_4_grp, sdio0_5_grp, + sdio0_6_grp, sdio0_7_grp, sdio0_8_grp, + sdio0_9_grp, sdio0_10_grp, sdio0_11_grp, + sdio0_12_grp, sdio0_13_grp, sdio0_14_grp, + sdio0_15_grp, sdio0_16_grp, sdio0_17_grp, + sdio0_18_grp, sdio0_19_grp, sdio0_20_grp, + sdio0_21_grp, sdio0_22_grp, sdio0_23_grp, + sdio0_24_grp, sdio0_25_grp, sdio0_26_grp, + sdio0_27_grp, sdio0_28_grp, sdio0_29_grp, + sdio0_30_grp, sdio0_31_grp, sdio0_32_grp, + sdio0_pc_0_grp, sdio0_cd_0_grp, sdio0_wp_0_grp, + sdio0_pc_1_grp, sdio0_cd_1_grp, sdio0_wp_1_grp, + sdio0_pc_2_grp, sdio0_cd_2_grp, sdio0_wp_2_grp, + sdio1_0_grp, sdio1_1_grp, sdio1_2_grp, + sdio1_3_grp, sdio1_4_grp, sdio1_5_grp, + sdio1_6_grp, sdio1_7_grp, sdio1_8_grp, + sdio1_9_grp, sdio1_10_grp, sdio1_11_grp, + sdio1_12_grp, sdio1_13_grp, sdio1_14_grp, + sdio1_15_grp, sdio1_pc_0_grp, sdio1_cd_0_grp, + sdio1_wp_0_grp, sdio1_pc_1_grp, sdio1_cd_1_grp, + sdio1_wp_1_grp, nand0_0_grp, nand0_ce_0_grp, + nand0_rb_0_grp, nand0_dqs_0_grp, nand0_ce_1_grp, + nand0_rb_1_grp, nand0_dqs_1_grp, can0_0_grp, + can0_1_grp, can0_2_grp, can0_3_grp, + can0_4_grp, can0_5_grp, can0_6_grp, + can0_7_grp, can0_8_grp, can0_9_grp, + can0_10_grp, can0_11_grp, can0_12_grp, + can0_13_grp, can0_14_grp, can0_15_grp, + can0_16_grp, can0_17_grp, can0_18_grp, + can1_0_grp, can1_1_grp, can1_2_grp, + can1_3_grp, can1_4_grp, can1_5_grp, + can1_6_grp, can1_7_grp, can1_8_grp, + can1_9_grp, can1_10_grp, can1_11_grp, + can1_12_grp, can1_13_grp, can1_14_grp, + can1_15_grp, can1_16_grp, can1_17_grp, + can1_18_grp, can1_19_grp, uart0_0_grp, + uart0_1_grp, uart0_2_grp, uart0_3_grp, + uart0_4_grp, uart0_5_grp, uart0_6_grp, + uart0_7_grp, uart0_8_grp, uart0_9_grp, + uart0_10_grp, uart0_11_grp, uart0_12_grp, + uart0_13_grp, uart0_14_grp, uart0_15_grp, + uart0_16_grp, uart0_17_grp, uart0_18_grp, + uart1_0_grp, uart1_1_grp, uart1_2_grp, + uart1_3_grp, uart1_4_grp, uart1_5_grp, + uart1_6_grp, uart1_7_grp, uart1_8_grp, + uart1_9_grp, uart1_10_grp, uart1_11_grp, + uart1_12_grp, uart1_13_grp, uart1_14_grp, + uart1_15_grp, uart1_16_grp, uart1_17_grp, + uart1_18_grp, i2c0_0_grp, i2c0_1_grp, + i2c0_2_grp, i2c0_3_grp, i2c0_4_grp, + i2c0_5_grp, i2c0_6_grp, i2c0_7_grp, + i2c0_8_grp, i2c0_9_grp, i2c0_10_grp, + i2c0_11_grp, i2c0_12_grp, i2c0_13_grp, + i2c0_14_grp, i2c0_15_grp, i2c0_16_grp, + i2c0_17_grp, i2c0_18_grp, i2c1_0_grp, + i2c1_1_grp, i2c1_2_grp, i2c1_3_grp, + i2c1_4_grp, i2c1_5_grp, i2c1_6_grp, + i2c1_7_grp, i2c1_8_grp, i2c1_9_grp, + i2c1_10_grp, i2c1_11_grp, i2c1_12_grp, + i2c1_13_grp, i2c1_14_grp, i2c1_15_grp, + i2c1_16_grp, i2c1_17_grp, i2c1_18_grp, + i2c1_19_grp, ttc0_clk_0_grp, ttc0_wav_0_grp, + ttc0_clk_1_grp, ttc0_wav_1_grp, ttc0_clk_2_grp, + ttc0_wav_2_grp, ttc0_clk_3_grp, ttc0_wav_3_grp, + ttc0_clk_4_grp, ttc0_wav_4_grp, ttc0_clk_5_grp, + ttc0_wav_5_grp, ttc0_clk_6_grp, ttc0_wav_6_grp, + ttc0_clk_7_grp, ttc0_wav_7_grp, ttc0_clk_8_grp, + ttc0_wav_8_grp, ttc1_clk_0_grp, ttc1_wav_0_grp, + ttc1_clk_1_grp, ttc1_wav_1_grp, ttc1_clk_2_grp, + ttc1_wav_2_grp, ttc1_clk_3_grp, ttc1_wav_3_grp, + ttc1_clk_4_grp, ttc1_wav_4_grp, ttc1_clk_5_grp, + ttc1_wav_5_grp, ttc1_clk_6_grp, ttc1_wav_6_grp, + ttc1_clk_7_grp, ttc1_wav_7_grp, ttc1_clk_8_grp, + ttc1_wav_8_grp, ttc2_clk_0_grp, ttc2_wav_0_grp, + ttc2_clk_1_grp, ttc2_wav_1_grp, ttc2_clk_2_grp, + ttc2_wav_2_grp, ttc2_clk_3_grp, ttc2_wav_3_grp, + ttc2_clk_4_grp, ttc2_wav_4_grp, ttc2_clk_5_grp, + ttc2_wav_5_grp, ttc2_clk_6_grp, ttc2_wav_6_grp, + ttc2_clk_7_grp, ttc2_wav_7_grp, ttc2_clk_8_grp, + ttc2_wav_8_grp, ttc3_clk_0_grp, ttc3_wav_0_grp, + ttc3_clk_1_grp, ttc3_wav_1_grp, ttc3_clk_2_grp, + ttc3_wav_2_grp, ttc3_clk_3_grp, ttc3_wav_3_grp, + ttc3_clk_4_grp, ttc3_wav_4_grp, ttc3_clk_5_grp, + ttc3_wav_5_grp, ttc3_clk_6_grp, ttc3_wav_6_grp, + ttc3_clk_7_grp, ttc3_wav_7_grp, ttc3_clk_8_grp, + ttc3_wav_8_grp, swdt0_clk_0_grp, swdt0_rst_0_grp, + swdt0_clk_1_grp, swdt0_rst_1_grp, swdt0_clk_2_grp, + swdt0_rst_2_grp, swdt0_clk_3_grp, swdt0_rst_3_grp, + swdt0_clk_4_grp, swdt0_rst_4_grp, swdt0_clk_5_grp, + swdt0_rst_5_grp, swdt0_clk_6_grp, swdt0_rst_6_grp, + swdt0_clk_7_grp, swdt0_rst_7_grp, swdt0_clk_8_grp, + swdt0_rst_8_grp, swdt0_clk_9_grp, swdt0_rst_9_grp, + swdt0_clk_10_grp, swdt0_rst_10_grp, swdt0_clk_11_grp, + swdt0_rst_11_grp, swdt0_clk_12_grp, swdt0_rst_12_grp, + swdt1_clk_0_grp, swdt1_rst_0_grp, swdt1_clk_1_grp, + swdt1_rst_1_grp, swdt1_clk_2_grp, swdt1_rst_2_grp, + swdt1_clk_3_grp, swdt1_rst_3_grp, swdt1_clk_4_grp, + swdt1_rst_4_grp, swdt1_clk_5_grp, swdt1_rst_5_grp, + swdt1_clk_6_grp, swdt1_rst_6_grp, swdt1_clk_7_grp, + swdt1_rst_7_grp, swdt1_clk_8_grp, swdt1_rst_8_grp, + swdt1_clk_9_grp, swdt1_rst_9_grp, swdt1_clk_10_grp, + swdt1_rst_10_grp, swdt1_clk_11_grp, swdt1_rst_11_grp, + swdt1_clk_12_grp, swdt1_rst_12_grp, gpio0_0_grp, + gpio0_1_grp, gpio0_2_grp, gpio0_3_grp, + gpio0_4_grp, gpio0_5_grp, gpio0_6_grp, + gpio0_7_grp, gpio0_8_grp, gpio0_9_grp, + gpio0_10_grp, gpio0_11_grp, gpio0_12_grp, + gpio0_13_grp, gpio0_14_grp, gpio0_15_grp, + gpio0_16_grp, gpio0_17_grp, gpio0_18_grp, + gpio0_19_grp, gpio0_20_grp, gpio0_21_grp, + gpio0_22_grp, gpio0_23_grp, gpio0_24_grp, + gpio0_25_grp, gpio0_26_grp, gpio0_27_grp, + gpio0_28_grp, gpio0_29_grp, gpio0_30_grp, + gpio0_31_grp, gpio0_32_grp, gpio0_33_grp, + gpio0_34_grp, gpio0_35_grp, gpio0_36_grp, + gpio0_37_grp, gpio0_38_grp, gpio0_39_grp, + gpio0_40_grp, gpio0_41_grp, gpio0_42_grp, + gpio0_43_grp, gpio0_44_grp, gpio0_45_grp, + gpio0_46_grp, gpio0_47_grp, gpio0_48_grp, + gpio0_49_grp, gpio0_50_grp, gpio0_51_grp, + gpio0_52_grp, gpio0_53_grp, gpio0_54_grp, + gpio0_55_grp, gpio0_56_grp, gpio0_57_grp, + gpio0_58_grp, gpio0_59_grp, gpio0_60_grp, + gpio0_61_grp, gpio0_62_grp, gpio0_63_grp, + gpio0_64_grp, gpio0_65_grp, gpio0_66_grp, + gpio0_67_grp, gpio0_68_grp, gpio0_69_grp, + gpio0_70_grp, gpio0_71_grp, gpio0_72_grp, + gpio0_73_grp, gpio0_74_grp, gpio0_75_grp, + gpio0_76_grp, gpio0_77_grp, usb0_0_grp, + usb1_0_grp, pmu0_0_grp, pmu0_1_grp, + pmu0_2_grp, pmu0_3_grp, pmu0_4_grp, + pmu0_5_grp, pmu0_6_grp, pmu0_7_grp, + pmu0_8_grp, pmu0_9_grp, pmu0_10_grp, + pmu0_11_grp, pcie0_0_grp, pcie0_1_grp, + pcie0_2_grp, pcie0_3_grp, pcie0_4_grp, + pcie0_5_grp, pcie0_6_grp, pcie0_7_grp, + csu0_0_grp, csu0_1_grp, csu0_2_grp, + csu0_3_grp, csu0_4_grp, csu0_5_grp, + csu0_6_grp, csu0_7_grp, csu0_8_grp, + csu0_9_grp, csu0_10_grp, csu0_11_grp, + dpaux0_0_grp, dpaux0_1_grp, dpaux0_2_grp, + dpaux0_3_grp, pjtag0_0_grp, pjtag0_1_grp, + pjtag0_2_grp, pjtag0_3_grp, pjtag0_4_grp, + pjtag0_5_grp, trace0_0_grp, trace0_clk_0_grp, + trace0_1_grp, trace0_clk_1_grp, trace0_2_grp, + trace0_clk_2_grp, testscan0_0_grp] + maxItems: 78 + + function: + description: + Specify the alternative function to be configured for the + given pin groups. + enum: [ethernet0, ethernet1, ethernet2, ethernet3, gemtsu0, usb0, usb1, mdio0, + mdio1, mdio2, mdio3, qspi0, qspi_fbclk, qspi_ss, spi0, spi1, spi0_ss, + spi1_ss, sdio0, sdio0_pc, sdio0_wp, sdio0_cd, sdio1, sdio1_pc, sdio1_wp, + sdio1_cd, nand0, nand0_ce, nand0_rb, nand0_dqs, can0, can1, uart0, uart1, + i2c0, i2c1, ttc0_clk, ttc0_wav, ttc1_clk, ttc1_wav, ttc2_clk, ttc2_wav, + ttc3_clk, ttc3_wav, swdt0_clk, swdt0_rst, swdt1_clk, swdt1_rst, gpio0, pmu0, + pcie0, csu0, dpaux0, pjtag0, trace0, trace0_clk, testscan0] + + required: + - groups + - function + + additionalProperties: false + + '^conf': + type: object + description: + Pinctrl node's client devices use subnodes for pin configurations, + which in turn use the standard properties below. + $ref: pincfg-node.yaml# + + properties: + groups: + description: + List of pin groups as mentioned above. + + pins: + description: + List of pin names to select in this subnode. + items: + pattern: '^MIO([0-9]|[1-6][0-9]|7[0-7])$' + maxItems: 78 + + bias-pull-up: true + + bias-pull-down: true + + bias-disable: true + + input-schmitt-enable: true + + input-schmitt-disable: true + + bias-high-impedance: true + + low-power-enable: true + + low-power-disable: true + + slew-rate: + enum: [0, 1] + + drive-strength: + description: + Selects the drive strength for MIO pins, in mA. + enum: [2, 4, 8, 12] + + power-source: + enum: [0, 1] + + oneOf: + - required: [ groups ] + - required: [ pins ] + + additionalProperties: false + + additionalProperties: false + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/pinctrl-zynqmp.h> + zynqmp_firmware: zynqmp-firmware { + pinctrl0: pinctrl { + compatible = "xlnx,zynqmp-pinctrl"; + + pinctrl_uart1_default: uart1-default { + mux { + groups = "uart0_4_grp", "uart0_5_grp"; + function = "uart0"; + }; + + conf { + groups = "uart0_4_grp"; + slew-rate = <SLEW_RATE_SLOW>; + power-source = <IO_STANDARD_LVCMOS18>; + }; + + conf-rx { + pins = "MIO18"; + bias-pull-up; + }; + + conf-tx { + pins = "MIO19"; + bias-disable; + input-schmitt-disable; + }; + }; + }; + }; + + uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_default>; + }; + +... diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt deleted file mode 100644 index f70956dea77b..000000000000 --- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt +++ /dev/null @@ -1,27 +0,0 @@ -Rockchip PWM controller - -Required properties: - - compatible: should be "rockchip,<name>-pwm" - "rockchip,rk2928-pwm": found on RK29XX,RK3066 and RK3188 SoCs - "rockchip,rk3288-pwm": found on RK3288 SOC - "rockchip,rv1108-pwm", "rockchip,rk3288-pwm": found on RV1108 SoC - "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC - - reg: physical base address and length of the controller's registers - - clocks: See ../clock/clock-bindings.txt - - For older hardware (rk2928, rk3066, rk3188, rk3228, rk3288, rk3399): - - There is one clock that's used both to derive the functional clock - for the device and as the bus clock. - - For newer hardware (rk3328 and future socs): specified by name - - "pwm": This is used to derive the functional clock. - - "pclk": This is the APB bus clock. - - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.yaml in this directory - for a description of the cell format. - -Example: - - pwm0: pwm@20030000 { - compatible = "rockchip,rk2928-pwm"; - reg = <0x20030000 0x10>; - clocks = <&cru PCLK_PWM01>; - #pwm-cells = <2>; - }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml new file mode 100644 index 000000000000..5596bee70509 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml @@ -0,0 +1,100 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/pwm-rockchip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Rockchip PWM controller + +maintainers: + - Heiko Stuebner <heiko@sntech.de> + +properties: + compatible: + oneOf: + - const: rockchip,rk2928-pwm + - const: rockchip,rk3288-pwm + - const: rockchip,rk3328-pwm + - const: rockchip,vop-pwm + - items: + - const: rockchip,rk3036-pwm + - const: rockchip,rk2928-pwm + - items: + - enum: + - rockchip,rk3368-pwm + - rockchip,rk3399-pwm + - rockchip,rv1108-pwm + - const: rockchip,rk3288-pwm + - items: + - enum: + - rockchip,px30-pwm + - rockchip,rk3308-pwm + - const: rockchip,rk3328-pwm + + reg: + maxItems: 1 + + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + maxItems: 2 + + "#pwm-cells": + enum: [2, 3] + description: + Must be 2 (rk2928) or 3 (rk3288 and later). + See pwm.yaml for a description of the cell format. + +required: + - compatible + - reg + - "#pwm-cells" + +if: + properties: + compatible: + contains: + enum: + - rockchip,rk3328-pwm + - rockchip,rv1108-pwm + +then: + properties: + clocks: + items: + - description: Used to derive the functional clock for the device. + - description: Used as the APB bus clock. + + clock-names: + items: + - const: pwm + - const: pclk + + required: + - clocks + - clock-names + +else: + properties: + clocks: + maxItems: 1 + description: + Used both to derive the functional clock + for the device and as the bus clock. + + required: + - clocks + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/rk3188-cru-common.h> + pwm0: pwm@20030000 { + compatible = "rockchip,rk2928-pwm"; + reg = <0x20030000 0x10>; + clocks = <&cru PCLK_PWM01>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml b/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml new file mode 100644 index 000000000000..d350f5edfb67 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/toshiba,pwm-visconti.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pwm/toshiba,pwm-visconti.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Toshiba Visconti PWM Controller + +maintainers: + - Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp> + +properties: + compatible: + items: + - const: toshiba,visconti-pwm + + reg: + maxItems: 1 + + '#pwm-cells': + const: 2 + +required: + - compatible + - reg + - '#pwm-cells' + +additionalProperties: false + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + pwm: pwm@241c0000 { + compatible = "toshiba,visconti-pwm"; + reg = <0 0x241c0000 0 0x1000>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm_mux>; + #pwm-cells = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml new file mode 100644 index 000000000000..208a628f8d6c --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/fsl,imx-rproc.yaml @@ -0,0 +1,90 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/remoteproc/fsl,imx-rproc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: NXP i.MX Co-Processor Bindings + +description: + This binding provides support for ARM Cortex M4 Co-processor found on some NXP iMX SoCs. + +maintainers: + - Peng Fan <peng.fan@nxp.com> + +properties: + compatible: + enum: + - fsl,imx8mq-cm4 + - fsl,imx8mm-cm4 + - fsl,imx7d-cm4 + - fsl,imx6sx-cm4 + + clocks: + maxItems: 1 + + syscon: + $ref: /schemas/types.yaml#/definitions/phandle + description: + Phandle to syscon block which provide access to System Reset Controller + + mbox-names: + items: + - const: tx + - const: rx + - const: rxdb + + mboxes: + description: + This property is required only if the rpmsg/virtio functionality is used. + List of <&phandle type channel> - 1 channel for TX, 1 channel for RX, 1 channel for RXDB. + (see mailbox/fsl,mu.yaml) + minItems: 1 + maxItems: 3 + + memory-region: + description: + If present, a phandle for a reserved memory area that used for vdev buffer, + resource table, vring region and others used by remote processor. + minItems: 1 + maxItems: 32 + +required: + - compatible + - clocks + - syscon + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx7d-clock.h> + m4_reserved_sysmem1: cm4@80000000 { + reg = <0x80000000 0x80000>; + }; + + m4_reserved_sysmem2: cm4@81000000 { + reg = <0x81000000 0x80000>; + }; + + imx7d-cm4 { + compatible = "fsl,imx7d-cm4"; + memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; + syscon = <&src>; + clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; + }; + + - | + #include <dt-bindings/clock/imx8mm-clock.h> + + imx8mm-cm4 { + compatible = "fsl,imx8mm-cm4"; + clocks = <&clk IMX8MM_CLK_M4_DIV>; + mbox-names = "tx", "rx", "rxdb"; + mboxes = <&mu 0 1 + &mu 1 1 + &mu 3 1>; + memory-region = <&vdev0buffer>, <&vdev0vring0>, <&vdev0vring1>, <&rsc_table>; + syscon = <&src>; + }; +... diff --git a/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt b/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt deleted file mode 100644 index fbcefd965dc4..000000000000 --- a/Documentation/devicetree/bindings/remoteproc/imx-rproc.txt +++ /dev/null @@ -1,33 +0,0 @@ -NXP iMX6SX/iMX7D Co-Processor Bindings ----------------------------------------- - -This binding provides support for ARM Cortex M4 Co-processor found on some -NXP iMX SoCs. - -Required properties: -- compatible Should be one of: - "fsl,imx7d-cm4" - "fsl,imx6sx-cm4" -- clocks Clock for co-processor (See: ../clock/clock-bindings.txt) -- syscon Phandle to syscon block which provide access to - System Reset Controller - -Optional properties: -- memory-region list of phandels to the reserved memory regions. - (See: ../reserved-memory/reserved-memory.txt) - -Example: - m4_reserved_sysmem1: cm4@80000000 { - reg = <0x80000000 0x80000>; - }; - - m4_reserved_sysmem2: cm4@81000000 { - reg = <0x81000000 0x80000>; - }; - - imx7d-cm4 { - compatible = "fsl,imx7d-cm4"; - memory-region = <&m4_reserved_sysmem1>, <&m4_reserved_sysmem2>; - syscon = <&src>; - clocks = <&clks IMX7D_ARM_M4_ROOT_CLK>; - }; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt index 1c330a8941f9..229f908fd831 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt @@ -18,6 +18,7 @@ on the Qualcomm ADSP Hexagon core. "qcom,sc7180-mpss-pas" "qcom,sdm845-adsp-pas" "qcom,sdm845-cdsp-pas" + "qcom,sdx55-mpss-pas" "qcom,sm8150-adsp-pas" "qcom,sm8150-cdsp-pas" "qcom,sm8150-mpss-pas" @@ -61,6 +62,7 @@ on the Qualcomm ADSP Hexagon core. must be "wdog", "fatal", "ready", "handover", "stop-ack" qcom,qcs404-wcss-pas: qcom,sc7180-mpss-pas: + qcom,sdx55-mpss-pas: qcom,sm8150-mpss-pas: qcom,sm8350-mpss-pas: must be "wdog", "fatal", "ready", "handover", "stop-ack", @@ -128,6 +130,8 @@ on the Qualcomm ADSP Hexagon core. qcom,sm8150-mpss-pas: qcom,sm8350-mpss-pas: must be "cx", "load_state", "mss" + qcom,sdx55-mpss-pas: + must be "cx", "mss" qcom,sm8250-adsp-pas: qcom,sm8350-adsp-pas: qcom,sm8150-slpi-pas: diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt index 7ccd5534b0ae..69c49c7b2cff 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt @@ -9,6 +9,7 @@ on the Qualcomm Hexagon core. Definition: must be one of: "qcom,q6v5-pil", "qcom,ipq8074-wcss-pil" + "qcom,qcs404-wcss-pil" "qcom,msm8916-mss-pil", "qcom,msm8974-mss-pil" "qcom,msm8996-mss-pil" @@ -39,6 +40,7 @@ on the Qualcomm Hexagon core. string: qcom,q6v5-pil: qcom,ipq8074-wcss-pil: + qcom,qcs404-wcss-pil: qcom,msm8916-mss-pil: qcom,msm8974-mss-pil: must be "wdog", "fatal", "ready", "handover", "stop-ack" @@ -67,6 +69,11 @@ on the Qualcomm Hexagon core. Definition: The clocks needed depend on the compatible string: qcom,ipq8074-wcss-pil: no clock names required + qcom,qcs404-wcss-pil: + must be "xo", "gcc_abhs_cbcr", "gcc_abhs_cbcr", + "gcc_axim_cbcr", "lcc_ahbfabric_cbc", "tcsr_lcc_cbc", + "lcc_abhs_cbc", "lcc_tcm_slave_cbc", "lcc_abhm_cbc", + "lcc_axim_cbc", "lcc_bcr_sleep" qcom,q6v5-pil: qcom,msm8916-mss-pil: qcom,msm8974-mss-pil: @@ -133,6 +140,14 @@ For the compatible string below the following supplies are required: booting of the Hexagon core For the compatible string below the following supplies are required: + "qcom,qcs404-wcss-pil" +- cx-supply: + Usage: required + Value type: <phandle> + Definition: reference to the regulators to be held on behalf of the + booting of the Hexagon core + +For the compatible string below the following supplies are required: "qcom,msm8996-mss-pil" - pll-supply: Usage: required diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt index da09c0d79ac0..a83080b8905c 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.txt @@ -34,6 +34,12 @@ on the Qualcomm WCNSS core. Definition: should be "wdog", "fatal", optionally followed by "ready", "handover", "stop-ack" +- firmware-name: + Usage: optional + Value type: <string> + Definition: must list the relative firmware image path for the + WCNSS core. Defaults to "wcnss.mdt". + - vddmx-supply: (deprecated for qcom,pronto-v1/2-pil) - vddcx-supply: (deprecated for qcom,pronto-v1/2-pil) - vddpx-supply: diff --git a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml index a1171dfba024..64afdcfb613d 100644 --- a/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml +++ b/Documentation/devicetree/bindings/remoteproc/st,stm32-rproc.yaml @@ -65,16 +65,23 @@ properties: Unidirectional channel: - from local to remote, where ACK from the remote means that it is ready for shutdown + - description: | + A channel (d) used by the local proc to notify the remote proc that it + has to stop interprocessor communnication. + Unidirectional channel: + - from local to remote, where ACK from the remote means that communnication + as been stopped on the remote side. minItems: 1 - maxItems: 3 + maxItems: 4 mbox-names: items: - const: vq0 - const: vq1 - const: shutdown + - const: detach minItems: 1 - maxItems: 3 + maxItems: 4 memory-region: description: diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml new file mode 100644 index 000000000000..3f981e897126 --- /dev/null +++ b/Documentation/devicetree/bindings/riscv/microchip.yaml @@ -0,0 +1,27 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/riscv/microchip.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PolarFire SoC-based boards device tree bindings + +maintainers: + - Cyril Jean <Cyril.Jean@microchip.com> + - Lewis Hanly <lewis.hanly@microchip.com> + +description: + Microchip PolarFire SoC-based boards + +properties: + $nodename: + const: '/' + compatible: + items: + - enum: + - microchip,mpfs-icicle-kit + - const: microchip,mpfs + +additionalProperties: true + +... diff --git a/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml new file mode 100644 index 000000000000..4fba6dba16f3 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/qcom-pm8xxx-rtc.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/rtc/qcom-pm8xxx-rtc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm PM8xxx PMIC RTC device + +maintainers: + - Satya Priya <skakit@codeaurora.org> + +properties: + compatible: + enum: + - qcom,pm8058-rtc + - qcom,pm8921-rtc + - qcom,pm8941-rtc + - qcom,pm8018-rtc + - qcom,pmk8350-rtc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + allow-set-time: + $ref: /schemas/types.yaml#/definitions/flag + description: + Indicates that the setting of RTC time is allowed by the host CPU. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/spmi/spmi.h> + spmi_bus: spmi@c440000 { + reg = <0x0c440000 0x1100>; + #address-cells = <2>; + #size-cells = <0>; + pmicintc: pmic@0 { + reg = <0x0 SPMI_USID>; + compatible = "qcom,pm8921"; + interrupts = <104 8>; + #interrupt-cells = <2>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + + pm8921_rtc: rtc@11d { + compatible = "qcom,pm8921-rtc"; + reg = <0x11d>; + interrupts = <0x27 0>; + }; + }; + }; +... diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index f0506a917793..41f57c448621 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -100,11 +100,6 @@ properties: - mediatek,mt7623-btif - const: mediatek,mtk-btif - items: - - enum: - - mediatek,mt7622-btif - - mediatek,mt7623-btif - - const: mediatek,mtk-btif - - items: - const: mrvl,mmp-uart - const: intel,xscale-uart - items: diff --git a/Documentation/devicetree/bindings/sound/ak5558.txt b/Documentation/devicetree/bindings/sound/ak5558.txt index 36934098170c..e28708db6686 100644 --- a/Documentation/devicetree/bindings/sound/ak5558.txt +++ b/Documentation/devicetree/bindings/sound/ak5558.txt @@ -4,7 +4,7 @@ This device supports I2C mode only. Required properties: -- compatible : "asahi-kasei,ak5558" +- compatible : "asahi-kasei,ak5558" or "asahi-kasei,ak5552". - reg : The I2C address of the device. Optional properties: diff --git a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml index 766e9109b2f7..43e7f86e3b23 100644 --- a/Documentation/devicetree/bindings/sound/audio-graph-port.yaml +++ b/Documentation/devicetree/bindings/sound/audio-graph-port.yaml @@ -11,71 +11,59 @@ maintainers: select: false +allOf: + - $ref: /schemas/graph.yaml#/$defs/port-base + properties: - port: - description: single OF-Graph subnode - type: object + prefix: + description: "device name prefix" + $ref: /schemas/types.yaml#/definitions/string + convert-rate: + description: CPU to Codec rate convert. + $ref: /schemas/types.yaml#/definitions/uint32 + convert-channels: + description: CPU to Codec rate channels. + $ref: /schemas/types.yaml#/definitions/uint32 +patternProperties: + "^endpoint(@[0-9a-f]+)?": + $ref: /schemas/graph.yaml#/$defs/endpoint-base properties: - reg: - maxItems: 1 - prefix: - description: "device name prefix" - $ref: /schemas/types.yaml#/definitions/string + mclk-fs: + description: | + Multiplication factor between stream rate and codec mclk. + When defined, mclk-fs property defined in dai-link sub nodes are + ignored. + $ref: /schemas/types.yaml#/definitions/uint32 + frame-inversion: + description: dai-link uses frame clock inversion + $ref: /schemas/types.yaml#/definitions/flag + bitclock-inversion: + description: dai-link uses bit clock inversion + $ref: /schemas/types.yaml#/definitions/flag + frame-master: + description: Indicates dai-link frame master. + $ref: /schemas/types.yaml#/definitions/phandle + bitclock-master: + description: Indicates dai-link bit clock master + $ref: /schemas/types.yaml#/definitions/phandle + dai-format: + description: audio format. + items: + enum: + - i2s + - right_j + - left_j + - dsp_a + - dsp_b + - ac97 + - pdm + - msb + - lsb convert-rate: description: CPU to Codec rate convert. $ref: /schemas/types.yaml#/definitions/uint32 convert-channels: description: CPU to Codec rate channels. $ref: /schemas/types.yaml#/definitions/uint32 - patternProperties: - "^endpoint(@[0-9a-f]+)?": - type: object - properties: - remote-endpoint: - maxItems: 1 - mclk-fs: - description: | - Multiplication factor between stream rate and codec mclk. - When defined, mclk-fs property defined in dai-link sub nodes are - ignored. - $ref: /schemas/types.yaml#/definitions/uint32 - frame-inversion: - description: dai-link uses frame clock inversion - $ref: /schemas/types.yaml#/definitions/flag - bitclock-inversion: - description: dai-link uses bit clock inversion - $ref: /schemas/types.yaml#/definitions/flag - frame-master: - description: Indicates dai-link frame master. - $ref: /schemas/types.yaml#/definitions/phandle - bitclock-master: - description: Indicates dai-link bit clock master - $ref: /schemas/types.yaml#/definitions/phandle - dai-format: - description: audio format. - items: - enum: - - i2s - - right_j - - left_j - - dsp_a - - dsp_b - - ac97 - - pdm - - msb - - lsb - convert-rate: - description: CPU to Codec rate convert. - $ref: /schemas/types.yaml#/definitions/uint32 - convert-channels: - description: CPU to Codec rate channels. - $ref: /schemas/types.yaml#/definitions/uint32 - - ports: - description: multi OF-Graph subnode - type: object - patternProperties: - "^port(@[0-9a-f]+)?": - $ref: "#/properties/port" additionalProperties: true diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml new file mode 100644 index 000000000000..b4c190bddd84 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/fsl,rpmsg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Audio RPMSG CPU DAI Controller + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +description: | + fsl_rpmsg is a virtual audio device. Mapping to real hardware devices + are SAI, DMA controlled by Cortex M core. What we see from Linux + side is a device which provides audio service by rpmsg channel. + +properties: + compatible: + enum: + - fsl,imx7ulp-rpmsg-audio + - fsl,imx8mn-rpmsg-audio + - fsl,imx8mm-rpmsg-audio + - fsl,imx8mp-rpmsg-audio + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + clocks: + items: + - description: Peripheral clock for register access + - description: Master clock + - description: DMA clock for DMA register access + - description: Parent clock for multiple of 8kHz sample rates + - description: Parent clock for multiple of 11kHz sample rates + + clock-names: + items: + - const: ipg + - const: mclk + - const: dma + - const: pll8k + - const: pll11k + + power-domains: + description: + List of phandle and PM domain specifier as documented in + Documentation/devicetree/bindings/power/power_domain.txt + maxItems: 1 + + memory-region: + $ref: /schemas/types.yaml#/definitions/phandle + description: + phandle to a node describing reserved memory (System RAM memory) + The M core can't access all the DDR memory space on some platform, + So reserved a specific memory for dma buffer which M core can + access. + (see bindings/reserved-memory/reserved-memory.txt) + + audio-codec: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle to a node of audio codec + + audio-routing: + $ref: /schemas/types.yaml#/definitions/non-unique-string-array + description: | + A list of the connections between audio components. Each entry is a + pair of strings, the first being the connection's sink, the second + being the connection's source. + + fsl,enable-lpa: + $ref: /schemas/types.yaml#/definitions/flag + description: enable low power audio path. + + fsl,rpmsg-out: + $ref: /schemas/types.yaml#/definitions/flag + description: | + This is a boolean property. If present, the transmitting function + will be enabled. + + fsl,rpmsg-in: + $ref: /schemas/types.yaml#/definitions/flag + description: | + This is a boolean property. If present, the receiving function + will be enabled. + +required: + - compatible + - model + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/imx8mn-clock.h> + + rpmsg_audio: rpmsg_audio { + compatible = "fsl,imx8mn-rpmsg-audio"; + model = "wm8524-audio"; + fsl,enable-lpa; + fsl,rpmsg-out; + clocks = <&clk IMX8MN_CLK_SAI3_IPG>, + <&clk IMX8MN_CLK_SAI3_ROOT>, + <&clk IMX8MN_CLK_SDMA3_ROOT>, + <&clk IMX8MN_AUDIO_PLL1_OUT>, + <&clk IMX8MN_AUDIO_PLL2_OUT>; + clock-names = "ipg", "mclk", "dma", "pll8k", "pll11k"; + }; diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt index 90d9e9d81624..23d83fa7609f 100644 --- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt +++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt @@ -42,6 +42,8 @@ The compatible list for this generic sound card currently: "fsl,imx-audio-si476x" + "fsl,imx-audio-wm8958" + Required properties: - compatible : Contains one of entries in the compatible list. diff --git a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml index 6f71294909a5..803627e984f6 100644 --- a/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/intel,keembay-i2s.yaml @@ -81,6 +81,6 @@ examples: interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; clock-names = "osc", "apb_clk"; clocks = <&scmi_clk KEEM_BAY_PSS_AUX_I2S3>, <&scmi_clk KEEM_BAY_PSS_I2S3>; - dmas = <&axi_dma0 29 &axi_dma0 33>; + dmas = <&axi_dma0 29>, <&axi_dma0 33>; dma-names = "tx", "rx"; }; diff --git a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml index 234f64a32184..81f266d66ec5 100644 --- a/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml +++ b/Documentation/devicetree/bindings/sound/marvell,mmp-sspa.yaml @@ -9,9 +9,6 @@ title: Marvel SSPA Digital Audio Interface Bindings maintainers: - Lubomir Rintel <lkundrak@v3.sk> -allOf: - - $ref: audio-graph-port.yaml# - properties: $nodename: pattern: "^audio-controller(@.*)?$" @@ -54,7 +51,8 @@ properties: - const: rx port: - type: object + $ref: audio-graph-port.yaml# + unevaluatedProperties: false properties: endpoint: diff --git a/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml new file mode 100644 index 000000000000..0481315cb5f2 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/mchp,i2s-mcc.yaml @@ -0,0 +1,108 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/mchp,i2s-mcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip I2S Multi-Channel Controller + +maintainers: + - Codrin Ciubotariu <codrin.ciubotariu@microchip.com> + +description: + The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and + supports a Time Division Multiplexed (TDM) interface with external + multi-channel audio codecs. It consists of a receiver, a transmitter and a + common clock generator that can be enabled separately to provide Adapter, + Client or Controller modes with receiver and/or transmitter active. + On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S + multi-channel is supported by using multiple data pins, output and + input, without TDM. + +properties: + "#sound-dai-cells": + const: 0 + + compatible: + enum: + - microchip,sam9x60-i2smcc + - microchip,sama7g5-i2smcc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Peripheral Bus Clock + - description: Generic Clock (Optional). Should be set mostly when Master + Mode is required. + minItems: 1 + + clock-names: + items: + - const: pclk + - const: gclk + minItems: 1 + + dmas: + items: + - description: TX DMA Channel + - description: RX DMA Channel + + dma-names: + items: + - const: tx + - const: rx + + microchip,tdm-data-pair: + description: + Represents the DIN/DOUT pair pins that are used to receive/send + TDM data. It is optional and it is only needed if the controller + uses the TDM mode. + $ref: /schemas/types.yaml#/definitions/uint8 + enum: [0, 1, 2, 3] + default: 0 + +if: + properties: + compatible: + const: microchip,sam9x60-i2smcc +then: + properties: + microchip,tdm-data-pair: false + +required: + - "#sound-dai-cells" + - compatible + - reg + - interrupts + - clocks + - clock-names + - dmas + - dma-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + i2s@f001c000 { + #sound-dai-cells = <0>; + compatible = "microchip,sam9x60-i2smcc"; + reg = <0xf001c000 0x100>; + interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; + dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(36))>, + <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | + AT91_XDMAC_DT_PERID(37))>; + dma-names = "tx", "rx"; + clocks = <&i2s_clk>, <&i2s_gclk>; + clock-names = "pclk", "gclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2s_default>; + }; diff --git a/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt b/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt deleted file mode 100644 index 91ec83a6faed..000000000000 --- a/Documentation/devicetree/bindings/sound/mchp-i2s-mcc.txt +++ /dev/null @@ -1,43 +0,0 @@ -* Microchip I2S Multi-Channel Controller - -Required properties: -- compatible: Should be "microchip,sam9x60-i2smcc". -- reg: Should be the physical base address of the controller and the - length of memory mapped region. -- interrupts: Should contain the interrupt for the controller. -- dmas: Should be one per channel name listed in the dma-names property, - as described in atmel-dma.txt and dma.txt files. -- dma-names: Identifier string for each DMA request line in the dmas property. - Two dmas have to be defined, "tx" and "rx". -- clocks: Must contain an entry for each entry in clock-names. - Please refer to clock-bindings.txt. -- clock-names: Should be one of each entry matching the clocks phandles list: - - "pclk" (peripheral clock) Required. - - "gclk" (generated clock) Optional (1). - -Optional properties: -- pinctrl-0: Should specify pin control groups used for this controller. -- princtrl-names: Should contain only one value - "default". - - -(1) : Only the peripheral clock is required. The generated clock is optional - and should be set mostly when Master Mode is required. - -Example: - - i2s@f001c000 { - compatible = "microchip,sam9x60-i2smcc"; - reg = <0xf001c000 0x100>; - interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>; - dmas = <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(36))>, - <&dma0 - (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | - AT91_XDMAC_DT_PERID(37))>; - dma-names = "tx", "rx"; - clocks = <&i2s_clk>, <&i2s_gclk>; - clock-names = "pclk", "gclk"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2s_default>; - }; diff --git a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt index 235eac8aea7b..ecd46ed8eb98 100644 --- a/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt +++ b/Documentation/devicetree/bindings/sound/mt8183-mt6358-ts3a227-max98357.txt @@ -4,6 +4,7 @@ Required properties: - compatible : "mediatek,mt8183_mt6358_ts3a227_max98357" for MAX98357A codec "mediatek,mt8183_mt6358_ts3a227_max98357b" for MAX98357B codec "mediatek,mt8183_mt6358_ts3a227_rt1015" for RT1015 codec + "mediatek,mt8183_mt6358_ts3a227_rt1015p" for RT1015P codec - mediatek,platform: the phandle of MT8183 ASoC platform Optional properties: diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml index b8645d9c38ac..5f6b37c251a8 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra186-dspk.yaml @@ -17,9 +17,6 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> -allOf: - - $ref: audio-graph-port.yaml# - properties: $nodename: pattern: "^dspk@[0-9a-f]*$" @@ -59,14 +56,18 @@ properties: available instances on a Tegra SoC. ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false description: | DSPK ACIF (Audio Client Interface) port connected to the corresponding AHUB (Audio Hub) ACIF port. port@1: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false description: | DSPK DAP (Digital Audio Port) interface which can be connected to external audio codec for playback. @@ -80,7 +81,7 @@ required: - assigned-clock-parents - sound-name-prefix -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml index 7cee7722df41..19eaacc3f12a 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-admaif.yaml @@ -17,9 +17,6 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> -allOf: - - $ref: audio-graph-port.yaml# - properties: $nodename: pattern: "^admaif@[0-9a-f]*$" @@ -41,6 +38,7 @@ properties: dma-names: true ports: + $ref: /schemas/graph.yaml#/properties/ports description: | Contains list of ACIF (Audio CIF) port nodes for ADMAIF channels. The number of port nodes depends on the number of ADMAIF channels @@ -48,6 +46,11 @@ properties: in AHUB (Audio Hub). Each port is capable of data transfers in both directions. + patternProperties: + '^port@[0-9]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + if: properties: compatible: @@ -92,7 +95,7 @@ required: - dmas - dma-names -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml index 31f3e51974bb..1118a9488345 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-ahub.yaml @@ -17,9 +17,6 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> -allOf: - - $ref: audio-graph-port.yaml# - properties: $nodename: pattern: "^ahub@[0-9a-f]*$" @@ -60,12 +57,34 @@ properties: ranges: true ports: + $ref: /schemas/graph.yaml#/properties/ports description: | Contains list of ACIF (Audio CIF) port nodes for AHUB (Audio Hub). These are connected to ACIF interfaces of AHUB clients. Thus the number of port nodes depend on the number of clients that AHUB may have depending on the SoC revision. + patternProperties: + '^port@[0-9]': + $ref: audio-graph-port.yaml# + unevaluatedProperties: false + +patternProperties: + '^i2s@[0-9a-f]+$': + type: object + + '^dmic@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-dmic.yaml# + + '^admaif@[0-9a-f]+$': + type: object + $ref: nvidia,tegra210-admaif.yaml# + + '^dspk@[0-9a-f]+$': + type: object + $ref: nvidia,tegra186-dspk.yaml# + required: - compatible - reg @@ -77,7 +96,7 @@ required: - "#size-cells" - ranges -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml index 89f4f471be24..fd275a575055 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-dmic.yaml @@ -16,9 +16,6 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> -allOf: - - $ref: audio-graph-port.yaml# - properties: $nodename: pattern: "^dmic@[0-9a-f]*$" @@ -60,14 +57,18 @@ properties: on the maximum available instances on a Tegra SoC. ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false description: | DMIC ACIF (Audio Client Interface) port connected to the corresponding AHUB (Audio Hub) ACIF port. port@1: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false description: | DMIC DAP (Digital Audio Port) interface which can be connected to external audio codec for capture. @@ -80,7 +81,7 @@ required: - assigned-clocks - assigned-clock-parents -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml index 556460332ffb..38e52e7dbb40 100644 --- a/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml +++ b/Documentation/devicetree/bindings/sound/nvidia,tegra210-i2s.yaml @@ -16,9 +16,6 @@ maintainers: - Jon Hunter <jonathanh@nvidia.com> - Sameer Pujar <spujar@nvidia.com> -allOf: - - $ref: audio-graph-port.yaml# - properties: $nodename: pattern: "^i2s@[0-9a-f]*$" @@ -78,14 +75,18 @@ properties: on the maximum available instances on a Tegra SoC. ports: - type: object + $ref: /schemas/graph.yaml#/properties/ports properties: port@0: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false description: | I2S ACIF (Audio Client Interface) port connected to the corresponding AHUB (Audio Hub) ACIF port. port@1: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false description: | I2S DAP (Digital Audio Port) interface which can be connected to external audio codec for playback or capture. @@ -98,7 +99,7 @@ required: - assigned-clocks - assigned-clock-parents -unevaluatedProperties: false +additionalProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml index e494a0416748..605de3a5847f 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml @@ -110,7 +110,9 @@ properties: - pattern: '^dvc\.[0-1]$' - pattern: '^clk_(a|b|c|i)$' - port: true + port: + $ref: audio-graph-port.yaml# + unevaluatedProperties: false # use patternProperties to avoid naming "xxx,yyy" issue patternProperties: @@ -256,7 +258,6 @@ required: allOf: - $ref: audio-graph.yaml# - - $ref: audio-graph-port.yaml# - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/sound/rt1019.yaml b/Documentation/devicetree/bindings/sound/rt1019.yaml new file mode 100644 index 000000000000..3d5a91a942f4 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rt1019.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/rt1019.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RT1019 Mono Class-D Audio Amplifier + +maintainers: + - jack.yu@realtek.com + +properties: + compatible: + const: realtek,rt1019 + + reg: + maxItems: 1 + description: I2C address of the device. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + rt1019: codec@28 { + compatible = "realtek,rt1019"; + reg = <0x28>; + }; + }; diff --git a/Documentation/devicetree/bindings/sound/rt5682.txt b/Documentation/devicetree/bindings/sound/rt5682.txt index 9c5fadb6ac82..cd8c53d8497e 100644 --- a/Documentation/devicetree/bindings/sound/rt5682.txt +++ b/Documentation/devicetree/bindings/sound/rt5682.txt @@ -44,7 +44,7 @@ Optional properties: - realtek,dmic-delay-ms : Set the delay time (ms) for the requirement of the particular DMIC. -- realtek,dmic-clk-driving-high : Set the high drving of the DMIC clock out. +- realtek,dmic-clk-driving-high : Set the high driving of the DMIC clock out. Pins on the device (for linking into audio routes) for RT5682: diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml index 4987eb91f2ab..55ae198220f4 100644 --- a/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml +++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-aio.yaml @@ -46,11 +46,9 @@ properties: patternProperties: "^port@[0-9]$": - type: object - properties: - endpoint: true - required: - - endpoint + description: FIXME, Need to define what each port is. + $ref: audio-graph-port.yaml# + unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml index 228168f685cf..48ddfcbbcbae 100644 --- a/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml +++ b/Documentation/devicetree/bindings/sound/socionext,uniphier-evea.yaml @@ -40,11 +40,9 @@ properties: patternProperties: "^port@[0-9]$": - type: object - properties: - endpoint: true - required: - - endpoint + description: FIXME, Need to define what each port is. + $ref: audio-graph-port.yaml# + unevaluatedProperties: false additionalProperties: false diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt index 9796c4639262..20931a63fd64 100644 --- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -1,6 +1,6 @@ Texas Instruments - tlv320aic3x Codec module -The tlv320aic3x serial control bus communicates through I2C protocols +The tlv320aic3x serial control bus communicates through both I2C and SPI bus protocols Required properties: @@ -63,7 +63,7 @@ CODEC input pins for other compatible codecs: The pins can be used in referring sound node's audio-routing property. -Example: +I2C example: #include <dt-bindings/gpio/gpio.h> @@ -78,3 +78,20 @@ tlv320aic3x: tlv320aic3x@1b { DRVDD-supply = <®ulator>; DVDD-supply = <®ulator>; }; + +SPI example: + +spi0: spi@f0000000 { + tlv320aic3x: codec@0 { + compatible = "ti,tlv320aic3x"; + reg = <0>; /* CS number */ + #sound-dai-cells = <0>; + spi-max-frequency = <1000000>; + + AVDD-supply = <®ulator>; + IOVDD-supply = <®ulator>; + DRVDD-supply = <®ulator>; + DVDD-supply = <®ulator>; + ai3x-ocmv = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt deleted file mode 100644 index 68e047170039..000000000000 --- a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.txt +++ /dev/null @@ -1,37 +0,0 @@ -* Broadcom Northstar Thermal - -This binding describes thermal sensor that is part of Northstar's DMU (Device -Management Unit). - -Required properties: -- compatible : Must be "brcm,ns-thermal" -- reg : iomem address range of PVTMON registers -- #thermal-sensor-cells : Should be <0> - -Example: - -thermal: thermal@1800c2c0 { - compatible = "brcm,ns-thermal"; - reg = <0x1800c2c0 0x10>; - #thermal-sensor-cells = <0>; -}; - -thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <0>; - polling-delay = <1000>; - coefficients = <(-556) 418000>; - thermal-sensors = <&thermal>; - - trips { - cpu-crit { - temperature = <125000>; - hysteresis = <0>; - type = "critical"; - }; - }; - - cooling-maps { - }; - }; -}; diff --git a/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml new file mode 100644 index 000000000000..fdeb333e010d --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/brcm,ns-thermal.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/brcm,ns-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Broadcom Northstar Thermal + +maintainers: + - Rafał Miłecki <rafal@milecki.pl> + +description: + Thermal sensor that is part of Northstar's DMU (Device Management Unit). + +allOf: + - $ref: thermal-sensor.yaml# + +properties: + compatible: + const: brcm,ns-thermal + + reg: + description: PVTMON registers range + maxItems: 1 + + "#thermal-sensor-cells": + const: 0 + +unevaluatedProperties: false + +required: + - reg + +examples: + - | + thermal: thermal@1800c2c0 { + compatible = "brcm,ns-thermal"; + reg = <0x1800c2c0 0x10>; + #thermal-sensor-cells = <0>; + }; + + thermal-zones { + cpu-thermal { + polling-delay-passive = <0>; + polling-delay = <1000>; + coefficients = <(-556) 418000>; + thermal-sensors = <&thermal>; + + trips { + cpu-crit { + temperature = <125000>; + hysteresis = <0>; + type = "critical"; + }; + }; + + cooling-maps { + }; + }; + }; diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 95462e071ab4..0242fd91b622 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -19,9 +19,15 @@ description: | properties: compatible: oneOf: + - description: msm9860 TSENS based + items: + - enum: + - qcom,ipq8064-tsens + - description: v0.1 of TSENS items: - enum: + - qcom,mdm9607-tsens - qcom,msm8916-tsens - qcom,msm8939-tsens - qcom,msm8974-tsens @@ -43,6 +49,7 @@ properties: - qcom,sdm845-tsens - qcom,sm8150-tsens - qcom,sm8250-tsens + - qcom,sm8350-tsens - const: qcom,tsens-v2 reg: @@ -73,7 +80,9 @@ properties: maxItems: 2 items: - const: calib - - const: calib_sel + - enum: + - calib_backup + - calib_sel "#qcom,sensors": description: @@ -88,12 +97,21 @@ properties: Number of cells required to uniquely identify the thermal sensors. Since we have multiple sensors this is set to 1 +required: + - compatible + - interrupts + - interrupt-names + - "#thermal-sensor-cells" + - "#qcom,sensors" + allOf: - if: properties: compatible: contains: enum: + - qcom,ipq8064-tsens + - qcom,mdm9607-tsens - qcom,msm8916-tsens - qcom,msm8974-tsens - qcom,msm8976-tsens @@ -114,19 +132,44 @@ allOf: interrupt-names: minItems: 2 -required: - - compatible - - reg - - "#qcom,sensors" - - interrupts - - interrupt-names - - "#thermal-sensor-cells" + - if: + properties: + compatible: + contains: + enum: + - qcom,tsens-v0_1 + - qcom,tsens-v1 + - qcom,tsens-v2 + + then: + required: + - reg additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> + // Example msm9860 based SoC (ipq8064): + gcc: clock-controller { + + /* ... */ + + tsens: thermal-sensor { + compatible = "qcom,ipq8064-tsens"; + + nvmem-cells = <&tsens_calib>, <&tsens_calib_backup>; + nvmem-cell-names = "calib", "calib_backup"; + interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow"; + + #qcom,sensors = <11>; + #thermal-sensor-cells = <1>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> // Example 1 (legacy: for pre v1 IP): tsens1: thermal-sensor@900000 { compatible = "qcom,msm8916-tsens", "qcom,tsens-v0_1"; diff --git a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml index b33a76eeac4e..f963204e0b16 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml +++ b/Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml @@ -28,14 +28,7 @@ properties: - renesas,r8a77980-thermal # R-Car V3H - renesas,r8a779a0-thermal # R-Car V3U - reg: - minItems: 2 - maxItems: 4 - items: - - description: TSC1 registers - - description: TSC2 registers - - description: TSC3 registers - - description: TSC4 registers + reg: true interrupts: items: @@ -71,8 +64,25 @@ if: enum: - renesas,r8a779a0-thermal then: + properties: + reg: + minItems: 2 + maxItems: 3 + items: + - description: TSC1 registers + - description: TSC2 registers + - description: TSC3 registers required: - interrupts +else: + properties: + reg: + items: + - description: TSC0 registers + - description: TSC1 registers + - description: TSC2 registers + - description: TSC3 registers + - description: TSC4 registers additionalProperties: false @@ -111,3 +121,20 @@ examples: }; }; }; + - | + #include <dt-bindings/clock/r8a779a0-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a779a0-sysc.h> + + tsc_r8a779a0: thermal@e6190000 { + compatible = "renesas,r8a779a0-thermal"; + reg = <0xe6190000 0x200>, + <0xe6198000 0x200>, + <0xe61a0000 0x200>, + <0xe61a8000 0x200>, + <0xe61b0000 0x200>; + clocks = <&cpg CPG_MOD 919>; + power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>; + resets = <&cpg 919>; + #thermal-sensor-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml index 9f747921e851..4bd345c71eb8 100644 --- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml @@ -36,6 +36,9 @@ properties: containing several internal sensors. enum: [0, 1] +required: + - "#thermal-sensor-cells" + additionalProperties: true examples: diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml index 99a72a480d32..b868cefc7c55 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.yaml +++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml @@ -495,6 +495,8 @@ patternProperties: description: Shenzhen Hugsun Technology Co. Ltd. "^hwacom,.*": description: HwaCom Systems Inc. + "^hycon,.*": + description: Hycon Technology Corp. "^hydis,.*": description: Hydis Technologies "^hyundai,.*": |