diff options
Diffstat (limited to 'Documentation')
58 files changed, 729 insertions, 358 deletions
diff --git a/Documentation/ABI/testing/sysfs-devices-vfio-dev b/Documentation/ABI/testing/sysfs-devices-vfio-dev new file mode 100644 index 000000000000..e21424fd9666 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-vfio-dev @@ -0,0 +1,8 @@ +What: /sys/.../<device>/vfio-dev/vfioX/ +Date: September 2022 +Contact: Yi Liu <yi.l.liu@intel.com> +Description: + This directory is created when the device is bound to a + vfio driver. The layout under this directory matches what + exists for a standard 'struct device'. 'X' is a unique + index marking this device in vfio. diff --git a/Documentation/admin-guide/cgroup-v2.rst b/Documentation/admin-guide/cgroup-v2.rst index 7bcfb38498c6..dc254a3cb956 100644 --- a/Documentation/admin-guide/cgroup-v2.rst +++ b/Documentation/admin-guide/cgroup-v2.rst @@ -976,6 +976,29 @@ All cgroup core files are prefixed with "cgroup." killing cgroups is a process directed operation, i.e. it affects the whole thread-group. + cgroup.pressure + A read-write single value file that allowed values are "0" and "1". + The default is "1". + + Writing "0" to the file will disable the cgroup PSI accounting. + Writing "1" to the file will re-enable the cgroup PSI accounting. + + This control attribute is not hierarchical, so disable or enable PSI + accounting in a cgroup does not affect PSI accounting in descendants + and doesn't need pass enablement via ancestors from root. + + The reason this control attribute exists is that PSI accounts stalls for + each cgroup separately and aggregates it at each level of the hierarchy. + This may cause non-negligible overhead for some workloads when under + deep level of the hierarchy, in which case this control attribute can + be used to disable PSI accounting in the non-leaf cgroups. + + irq.pressure + A read-write nested-keyed file. + + Shows pressure stall information for IRQ/SOFTIRQ. See + :ref:`Documentation/accounting/psi.rst <psi>` for details. + Controllers =========== diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index 69b1533c1f02..a465d5242774 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -6851,6 +6851,12 @@ Crash from Xen panic notifier, without executing late panic() code such as dumping handler. + xen_msr_safe= [X86,XEN] + Format: <bool> + Select whether to always use non-faulting (safe) MSR + access functions when running as Xen PV guest. The + default value is controlled by CONFIG_XEN_PV_MSR_SAFE. + xen_nopvspin [X86,XEN] Disables the qspinlock slowpath using Xen PV optimizations. This parameter is obsoleted by "nopvspin" parameter, which diff --git a/Documentation/admin-guide/sysctl/kernel.rst b/Documentation/admin-guide/sysctl/kernel.rst index 835c8844bba4..98d1b198b2b4 100644 --- a/Documentation/admin-guide/sysctl/kernel.rst +++ b/Documentation/admin-guide/sysctl/kernel.rst @@ -65,6 +65,11 @@ combining the following values: 4 s3_beep = ======= +arch +==== + +The machine hardware name, the same output as ``uname -m`` +(e.g. ``x86_64`` or ``aarch64``). auto_msgmni =========== diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst index 17d9fc5d14fb..808ade4cc008 100644 --- a/Documentation/arm64/silicon-errata.rst +++ b/Documentation/arm64/silicon-errata.rst @@ -76,6 +76,8 @@ stable kernels. +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A55 | #1530923 | ARM64_ERRATUM_1530923 | +----------------+-----------------+-----------------+-----------------------------+ +| ARM | Cortex-A55 | #2441007 | ARM64_ERRATUM_2441007 | ++----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A57 | #832075 | ARM64_ERRATUM_832075 | +----------------+-----------------+-----------------+-----------------------------+ | ARM | Cortex-A57 | #852523 | N/A | diff --git a/Documentation/dev-tools/checkpatch.rst b/Documentation/dev-tools/checkpatch.rst index b52452bc2963..c3389c6f3838 100644 --- a/Documentation/dev-tools/checkpatch.rst +++ b/Documentation/dev-tools/checkpatch.rst @@ -612,6 +612,13 @@ Commit message See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#describe-your-changes + **BAD_FIXES_TAG** + The Fixes: tag is malformed or does not follow the community conventions. + This can occur if the tag have been split into multiple lines (e.g., when + pasted in an email program with word wrapping enabled). + + See: https://www.kernel.org/doc/html/latest/process/submitting-patches.html#describe-your-changes + Comparison style ---------------- diff --git a/Documentation/dev-tools/kunit/run_wrapper.rst b/Documentation/dev-tools/kunit/run_wrapper.rst index 6b33caf6c8ab..dafe8eb28d30 100644 --- a/Documentation/dev-tools/kunit/run_wrapper.rst +++ b/Documentation/dev-tools/kunit/run_wrapper.rst @@ -251,14 +251,15 @@ command line arguments: compiling a kernel (using ``build`` or ``run`` commands). For example: to enable compiler warnings, we can pass ``--make_options W=1``. -- ``--alltests``: Builds a UML kernel with all config options enabled - using ``make allyesconfig``. This allows us to run as many tests as - possible. - - .. note:: It is slow and prone to breakage as new options are - added or modified. Instead, enable all tests - which have satisfied dependencies by adding - ``CONFIG_KUNIT_ALL_TESTS=y`` to your ``.kunitconfig``. +- ``--alltests``: Enable a predefined set of options in order to build + as many tests as possible. + + .. note:: The list of enabled options can be found in + ``tools/testing/kunit/configs/all_tests.config``. + + If you only want to enable all tests with otherwise satisfied + dependencies, instead add ``CONFIG_KUNIT_ALL_TESTS=y`` to your + ``.kunitconfig``. - ``--kunitconfig``: Specifies the path or the directory of the ``.kunitconfig`` file. For example: diff --git a/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml new file mode 100644 index 000000000000..799ae5c3e32a --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/fsl,mu-msi.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/fsl,mu-msi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale/NXP i.MX Messaging Unit (MU) work as msi controller + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +description: | + The Messaging Unit module enables two processors within the SoC to + communicate and coordinate by passing messages (e.g. data, status + and control) through the MU interface. The MU also provides the ability + for one processor (A side) to signal the other processor (B side) using + interrupts. + + Because the MU manages the messaging between processors, the MU uses + different clocks (from each side of the different peripheral buses). + Therefore, the MU must synchronize the accesses from one side to the + other. The MU accomplishes synchronization using two sets of matching + registers (Processor A-side, Processor B-side). + + MU can work as msi interrupt controller to do doorbell + +allOf: + - $ref: /schemas/interrupt-controller/msi-controller.yaml# + +properties: + compatible: + enum: + - fsl,imx6sx-mu-msi + - fsl,imx7ulp-mu-msi + - fsl,imx8ulp-mu-msi + - fsl,imx8ulp-mu-msi-s4 + + reg: + items: + - description: a side register base address + - description: b side register base address + + reg-names: + items: + - const: processor-a-side + - const: processor-b-side + + interrupts: + description: a side interrupt number. + maxItems: 1 + + clocks: + maxItems: 1 + + power-domains: + items: + - description: a side power domain + - description: b side power domain + + power-domain-names: + items: + - const: processor-a-side + - const: processor-b-side + + interrupt-controller: true + + msi-controller: true + + "#msi-cells": + const: 0 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - msi-controller + - "#msi-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/firmware/imx/rsrc.h> + + msi-controller@5d270000 { + compatible = "fsl,imx6sx-mu-msi"; + msi-controller; + #msi-cells = <0>; + interrupt-controller; + reg = <0x5d270000 0x10000>, /* A side */ + <0x5d300000 0x10000>; /* B side */ + reg-names = "processor-a-side", "processor-b-side"; + interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>; + power-domains = <&pd IMX_SC_R_MU_12A>, + <&pd IMX_SC_R_MU_12B>; + power-domain-names = "processor-a-side", "processor-b-side"; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml index 9e76fff20323..13a893b18fb6 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/realtek,rtl-intc.yaml @@ -6,6 +6,14 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Realtek RTL SoC interrupt controller devicetree bindings +description: + Interrupt controller and router for Realtek MIPS SoCs, allowing each SoC + interrupt to be routed to one parent CPU (hardware) interrupt, or left + disconnected. + All connected input lines from SoC peripherals can be masked individually, + and an interrupt status register is present to indicate which interrupts are + pending. + maintainers: - Birger Koblitz <mail@birger-koblitz.de> - Bert Vermeulen <bert@biot.com> @@ -13,23 +21,33 @@ maintainers: properties: compatible: - const: realtek,rtl-intc + oneOf: + - items: + - enum: + - realtek,rtl8380-intc + - const: realtek,rtl-intc + - const: realtek,rtl-intc + deprecated: true "#interrupt-cells": + description: + SoC interrupt line index. const: 1 reg: maxItems: 1 interrupts: - maxItems: 1 + minItems: 1 + maxItems: 15 + description: + List of parent interrupts, in the order that they are connected to this + interrupt router's outputs, starting at the first output. interrupt-controller: true - "#address-cells": - const: 0 - interrupt-map: + deprecated: true description: Describes mapping from SoC interrupts to CPU interrupts required: @@ -37,21 +55,33 @@ required: - reg - "#interrupt-cells" - interrupt-controller - - "#address-cells" - - interrupt-map + +allOf: + - if: + properties: + compatible: + const: realtek,rtl-intc + then: + properties: + "#address-cells": + const: 0 + required: + - "#address-cells" + - interrupt-map + else: + required: + - interrupts additionalProperties: false examples: - | - intc: interrupt-controller@3000 { - compatible = "realtek,rtl-intc"; + interrupt-controller@3000 { + compatible = "realtek,rtl8380-intc", "realtek,rtl-intc"; #interrupt-cells = <1>; interrupt-controller; - reg = <0x3000 0x20>; - #address-cells = <0>; - interrupt-map = - <31 &cpuintc 2>, - <30 &cpuintc 1>, - <29 &cpuintc 5>; + reg = <0x3000 0x18>; + + interrupt-parent = <&cpuintc>; + interrupts = <2>, <3>, <4>, <5>, <6>; }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml index 620f01775e42..62fd47c88275 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,irqc.yaml @@ -37,6 +37,7 @@ properties: - renesas,intc-ex-r8a77990 # R-Car E3 - renesas,intc-ex-r8a77995 # R-Car D3 - renesas,intc-ex-r8a779a0 # R-Car V3U + - renesas,intc-ex-r8a779g0 # R-Car V4H - const: renesas,irqc '#interrupt-cells': diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml index 92e0f8c3eff2..99e01f4d0a69 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml @@ -66,6 +66,11 @@ properties: - enum: - allwinner,sun20i-d1-plic - const: thead,c900-plic + - items: + - const: sifive,plic-1.0.0 + - const: riscv,plic0 + deprecated: true + description: For the QEMU virt machine only reg: maxItems: 1 diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml index 88c46e61732e..1151518859bd 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml @@ -59,6 +59,9 @@ properties: interrupt-controller: true + '#interrupt-cells': + const: 0 + msi-controller: true ti,interrupt-ranges: diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml index e12aee42b126..c99cc7323c71 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml +++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml @@ -58,6 +58,9 @@ properties: 1 = If intr supports edge triggered interrupts. 4 = If intr supports level triggered interrupts. + reg: + maxItems: 1 + interrupt-controller: true '#interrupt-cells': diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml index 328952d7acbb..3c14a98430e1 100644 --- a/Documentation/devicetree/bindings/leds/common.yaml +++ b/Documentation/devicetree/bindings/leds/common.yaml @@ -79,24 +79,27 @@ properties: the LED. $ref: /schemas/types.yaml#/definitions/string - enum: - # LED will act as a back-light, controlled by the framebuffer system - - backlight - # LED will turn on (but for leds-gpio see "default-state" property in - # Documentation/devicetree/bindings/leds/leds-gpio.yaml) - - default-on - # LED "double" flashes at a load average based rate - - heartbeat - # LED indicates disk activity - - disk-activity - # LED indicates IDE disk activity (deprecated), in new implementations - # use "disk-activity" - - ide-disk - # LED flashes at a fixed, configurable rate - - timer - # LED alters the brightness for the specified duration with one software - # timer (requires "led-pattern" property) - - pattern + oneOf: + - enum: + # LED will act as a back-light, controlled by the framebuffer system + - backlight + # LED will turn on (but for leds-gpio see "default-state" property in + # Documentation/devicetree/bindings/leds/leds-gpio.yaml) + - default-on + # LED "double" flashes at a load average based rate + - heartbeat + # LED indicates disk activity + - disk-activity + # LED indicates IDE disk activity (deprecated), in new implementations + # use "disk-activity" + - ide-disk + # LED flashes at a fixed, configurable rate + - timer + # LED alters the brightness for the specified duration with one software + # timer (requires "led-pattern" property) + - pattern + # LED is triggered by SD/MMC activity + - pattern: "^mmc[0-9]+$" led-pattern: description: | diff --git a/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml index 204b103ffc2c..16b3abc2af3a 100644 --- a/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml +++ b/Documentation/devicetree/bindings/leds/mediatek,mt6370-indicator.yaml @@ -13,9 +13,6 @@ description: | This module is part of the MT6370 MFD device. Add MT6370 LED driver include 4-channel RGB LED support Register/PWM/Breath Mode -allOf: - - $ref: leds-class-multicolor.yaml# - properties: compatible: const: mediatek,mt6370-indicator @@ -29,6 +26,8 @@ properties: patternProperties: "^multi-led@[0-3]$": type: object + $ref: leds-class-multicolor.yaml# + unevaluatedProperties: false properties: reg: diff --git a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml index 250484d59ecd..5644882db2e8 100644 --- a/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml +++ b/Documentation/devicetree/bindings/mfd/mediatek,mt6370.yaml @@ -139,8 +139,8 @@ examples: charger { compatible = "mediatek,mt6370-charger"; - interrupts = <48>, <68>, <6>; - interrupt-names = "attach_i", "uvp_d_evt", "mivr"; + interrupts = <68>, <48>, <6>; + interrupt-names = "uvp_d_evt", "attach_i", "mivr"; io-channels = <&mt6370_adc MT6370_CHAN_IBUS>; mt6370_otg_vbus: usb-otg-vbus-regulator { diff --git a/Documentation/devicetree/bindings/riscv/cpus.yaml b/Documentation/devicetree/bindings/riscv/cpus.yaml index 873dd12f6e89..90a7cabf58fe 100644 --- a/Documentation/devicetree/bindings/riscv/cpus.yaml +++ b/Documentation/devicetree/bindings/riscv/cpus.yaml @@ -9,6 +9,7 @@ title: RISC-V bindings for 'cpus' DT nodes maintainers: - Paul Walmsley <paul.walmsley@sifive.com> - Palmer Dabbelt <palmer@sifive.com> + - Conor Dooley <conor@kernel.org> description: | This document uses some terminology common to the RISC-V community @@ -79,9 +80,7 @@ properties: insensitive, letters in the riscv,isa string must be all lowercase to simplify parsing. $ref: "/schemas/types.yaml#/definitions/string" - enum: - - rv64imac - - rv64imafdc + pattern: ^rv(?:64|32)imaf?d?q?c?b?v?k?h?(?:_[hsxz](?:[a-z])+)*$ # RISC-V requires 'timebase-frequency' in /cpus, so disallow it here timebase-frequency: false diff --git a/Documentation/devicetree/bindings/riscv/microchip.yaml b/Documentation/devicetree/bindings/riscv/microchip.yaml index 37f97ee4fe46..714d0fcab399 100644 --- a/Documentation/devicetree/bindings/riscv/microchip.yaml +++ b/Documentation/devicetree/bindings/riscv/microchip.yaml @@ -7,8 +7,8 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip PolarFire SoC-based boards maintainers: - - Cyril Jean <Cyril.Jean@microchip.com> - - Lewis Hanly <lewis.hanly@microchip.com> + - Conor Dooley <conor.dooley@microchip.com> + - Daire McNamara <daire.mcnamara@microchip.com> description: Microchip PolarFire SoC-based boards @@ -17,12 +17,20 @@ properties: $nodename: const: '/' compatible: - items: - - enum: - - microchip,mpfs-icicle-kit - - microchip,mpfs-icicle-reference-rtlv2203 - - sundance,polarberry - - const: microchip,mpfs + oneOf: + - items: + - enum: + - microchip,mpfs-icicle-reference-rtlv2203 + - microchip,mpfs-icicle-reference-rtlv2210 + - const: microchip,mpfs-icicle-kit + - const: microchip,mpfs + + - items: + - enum: + - aries,m100pfsevp + - microchip,mpfs-sev-kit + - sundance,polarberry + - const: microchip,mpfs additionalProperties: true diff --git a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml index ca3b9be58058..bf3f07421f7e 100644 --- a/Documentation/devicetree/bindings/riscv/sifive-l2-cache.yaml +++ b/Documentation/devicetree/bindings/riscv/sifive,ccache0.yaml @@ -2,18 +2,18 @@ # Copyright (C) 2020 SiFive, Inc. %YAML 1.2 --- -$id: http://devicetree.org/schemas/riscv/sifive-l2-cache.yaml# +$id: http://devicetree.org/schemas/riscv/sifive,ccache0.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: SiFive L2 Cache Controller +title: SiFive Composable Cache Controller maintainers: - Sagar Kadam <sagar.kadam@sifive.com> - Paul Walmsley <paul.walmsley@sifive.com> description: - The SiFive Level 2 Cache Controller is used to provide access to fast copies - of memory for masters in a Core Complex. The Level 2 Cache Controller also + The SiFive Composable Cache Controller is used to provide access to fast copies + of memory for masters in a Core Complex. The Composable Cache Controller also acts as directory-based coherency manager. All the properties in ePAPR/DeviceTree specification applies for this platform. @@ -22,6 +22,7 @@ select: compatible: contains: enum: + - sifive,ccache0 - sifive,fu540-c000-ccache - sifive,fu740-c000-ccache @@ -33,6 +34,7 @@ properties: oneOf: - items: - enum: + - sifive,ccache0 - sifive,fu540-c000-ccache - sifive,fu740-c000-ccache - const: cache @@ -45,7 +47,7 @@ properties: const: 64 cache-level: - const: 2 + enum: [2, 3] cache-sets: enum: [1024, 2048] @@ -115,6 +117,22 @@ allOf: cache-sets: const: 1024 + - if: + properties: + compatible: + contains: + const: sifive,ccache0 + + then: + properties: + cache-level: + enum: [2, 3] + + else: + properties: + cache-level: + const: 2 + additionalProperties: false required: diff --git a/Documentation/devicetree/bindings/timer/sifive,clint.yaml b/Documentation/devicetree/bindings/timer/sifive,clint.yaml index e64f46339079..bbad24165837 100644 --- a/Documentation/devicetree/bindings/timer/sifive,clint.yaml +++ b/Documentation/devicetree/bindings/timer/sifive,clint.yaml @@ -22,12 +22,18 @@ description: properties: compatible: - items: - - enum: - - sifive,fu540-c000-clint - - starfive,jh7100-clint - - canaan,k210-clint - - const: sifive,clint0 + oneOf: + - items: + - enum: + - sifive,fu540-c000-clint + - starfive,jh7100-clint + - canaan,k210-clint + - const: sifive,clint0 + - items: + - const: sifive,clint0 + - const: riscv,clint0 + deprecated: true + description: For the QEMU virt machine only description: Should be "<vendor>,<chip>-clint" and "sifive,clint<version>". diff --git a/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.yaml b/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.yaml new file mode 100644 index 000000000000..ad27bc518670 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/atmel,at91sam9-wdt.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Microchip Technology, Inc. and its subsidiaries +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/atmel,at91sam9-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel Watchdog Timers + +maintainers: + - Eugen Hristev <eugen.hristev@microchip.com> + +properties: + compatible: + const: atmel,at91sam9260-wdt + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + atmel,max-heartbeat-sec: + description: + Should contain the maximum heartbeat value in seconds. This value + should be less or equal to 16. It is used to compute the WDV field. + maximum: 16 + + atmel,min-heartbeat-sec: + description: + Should contain the minimum heartbeat value in seconds. This value + must be smaller than the max-heartbeat-sec value. It is used to + compute the WDD field. + maximum: 16 + + atmel,watchdog-type: + $ref: /schemas/types.yaml#/definitions/string + description: | + Should be hardware or software. + oneOf: + - description: + Hardware watchdog uses the at91 watchdog reset. + const: hardware + - description: | + Software watchdog uses the watchdog interrupt + to trigger a software reset. + const: software + default: hardware + + atmel,reset-type: + $ref: /schemas/types.yaml#/definitions/string + description: | + Should be proc or all. This is valid only when using hardware watchdog. + oneOf: + - description: + Assert peripherals and processor reset signals. + const: all + - description: + Assert the processor reset signal. + const: proc + default: all + + atmel,disable: + $ref: /schemas/types.yaml#/definitions/flag + description: + Should be present if you want to stop the watchdog. + + atmel,idle-halt: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Should be present if you want to stop the watchdog when + entering idle state. + CAUTION: This property should be used with care, it actually makes the + watchdog not counting when the CPU is in idle state, therefore the + watchdog reset time depends on mean CPU usage and will not reset at all + if the CPU stops working while it is in idle state, which is probably + not what you want. + + atmel,dbg-halt: + $ref: /schemas/types.yaml#/definitions/flag + description: | + Should be present if you want to stop the watchdog when + entering debug state. + +required: + - compatible + - reg + - clocks + +allOf: + - $ref: watchdog.yaml# + - if: + properties: + atmel,reset-type: + enum: + - all + - proc + then: + properties: + atmel,watchdog-type: + const: hardware + +dependencies: + atmel,reset-type: ['atmel,watchdog-type'] + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + watchdog@fffffd40 { + compatible = "atmel,at91sam9260-wdt"; + reg = <0xfffffd40 0x10>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&clk32k>; + timeout-sec = <15>; + atmel,watchdog-type = "hardware"; + atmel,reset-type = "all"; + atmel,dbg-halt; + atmel,idle-halt; + atmel,max-heartbeat-sec = <16>; + atmel,min-heartbeat-sec = <0>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt b/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt deleted file mode 100644 index 711a880b3d3b..000000000000 --- a/Documentation/devicetree/bindings/watchdog/atmel-wdt.txt +++ /dev/null @@ -1,51 +0,0 @@ -* Atmel Watchdog Timers - -** at91sam9-wdt - -Required properties: -- compatible: must be "atmel,at91sam9260-wdt". -- reg: physical base address of the controller and length of memory mapped - region. -- clocks: phandle to input clock. - -Optional properties: -- timeout-sec: contains the watchdog timeout in seconds. -- interrupts : Should contain WDT interrupt. -- atmel,max-heartbeat-sec : Should contain the maximum heartbeat value in - seconds. This value should be less or equal to 16. It is used to - compute the WDV field. -- atmel,min-heartbeat-sec : Should contain the minimum heartbeat value in - seconds. This value must be smaller than the max-heartbeat-sec value. - It is used to compute the WDD field. -- atmel,watchdog-type : Should be "hardware" or "software". Hardware watchdog - use the at91 watchdog reset. Software watchdog use the watchdog - interrupt to trigger a software reset. -- atmel,reset-type : Should be "proc" or "all". - "all" : assert peripherals and processor reset signals - "proc" : assert the processor reset signal - This is valid only when using "hardware" watchdog. -- atmel,disable : Should be present if you want to disable the watchdog. -- atmel,idle-halt : Should be present if you want to stop the watchdog when - entering idle state. - CAUTION: This property should be used with care, it actually makes the - watchdog not counting when the CPU is in idle state, therefore the - watchdog reset time depends on mean CPU usage and will not reset at all - if the CPU stop working while it is in idle state, which is probably - not what you want. -- atmel,dbg-halt : Should be present if you want to stop the watchdog when - entering debug state. - -Example: - watchdog@fffffd40 { - compatible = "atmel,at91sam9260-wdt"; - reg = <0xfffffd40 0x10>; - interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; - clocks = <&clk32k>; - timeout-sec = <15>; - atmel,watchdog-type = "hardware"; - atmel,reset-type = "all"; - atmel,dbg-halt; - atmel,idle-halt; - atmel,max-heartbeat-sec = <16>; - atmel,min-heartbeat-sec = <0>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml b/Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml new file mode 100644 index 000000000000..b2b17fdf4e39 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/mediatek,mt7621-wdt.yaml @@ -0,0 +1,33 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/mediatek,mt7621-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ralink Watchdog Timers + +maintainers: + - Sergio Paracuellos <sergio.paracuellos@gmail.com> + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + const: mediatek,mt7621-wdt + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + watchdog@100 { + compatible = "mediatek,mt7621-wdt"; + reg = <0x100 0x100>; + }; diff --git a/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt b/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt deleted file mode 100644 index c15ef0ef609f..000000000000 --- a/Documentation/devicetree/bindings/watchdog/mt7621-wdt.txt +++ /dev/null @@ -1,12 +0,0 @@ -Ralink Watchdog Timers - -Required properties: -- compatible: must be "mediatek,mt7621-wdt" -- reg: physical base address of the controller and length of the register range - -Example: - - watchdog@100 { - compatible = "mediatek,mt7621-wdt"; - reg = <0x100 0x10>; - }; diff --git a/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt b/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt deleted file mode 100644 index c6ae9c9d5e3e..000000000000 --- a/Documentation/devicetree/bindings/watchdog/of-xilinx-wdt.txt +++ /dev/null @@ -1,26 +0,0 @@ -Xilinx AXI/PLB soft-core watchdog Device Tree Bindings ---------------------------------------------------------- - -Required properties: -- compatible : Should be "xlnx,xps-timebase-wdt-1.00.a" or - "xlnx,xps-timebase-wdt-1.01.a". -- reg : Physical base address and size - -Optional properties: -- clocks : Input clock specifier. Refer to common clock - bindings. -- clock-frequency : Frequency of clock in Hz -- xlnx,wdt-enable-once : 0 - Watchdog can be restarted - 1 - Watchdog can be enabled just once -- xlnx,wdt-interval : Watchdog timeout interval in 2^<val> clock cycles, - <val> is integer from 8 to 31. - -Example: -axi-timebase-wdt@40100000 { - clock-frequency = <50000000>; - compatible = "xlnx,xps-timebase-wdt-1.00.a"; - clocks = <&clkc 15>; - reg = <0x40100000 0x10000>; - xlnx,wdt-enable-once = <0x0>; - xlnx,wdt-interval = <0x1b>; -} ; diff --git a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml index a8d7dde5271b..26b1815a6753 100644 --- a/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/renesas,wdt.yaml @@ -33,6 +33,11 @@ properties: - items: - enum: + - renesas,r9a09g011-wdt # RZ/V2M + - const: renesas,rzv2m-wdt # RZ/V2M + + - items: + - enum: - renesas,r8a7742-wdt # RZ/G1H - renesas,r8a7743-wdt # RZ/G1M - renesas,r8a7744-wdt # RZ/G1N @@ -65,18 +70,35 @@ properties: - enum: - renesas,r8a779a0-wdt # R-Car V3U - renesas,r8a779f0-wdt # R-Car S4-8 + - renesas,r8a779g0-wdt # R-Car V4H - const: renesas,rcar-gen4-wdt # R-Car Gen4 reg: maxItems: 1 - interrupts: true - - interrupt-names: true - - clocks: true - - clock-names: true + interrupts: + minItems: 1 + items: + - description: Timeout + - description: Parity error + + interrupt-names: + minItems: 1 + items: + - const: wdt + - const: perrout + + clocks: + minItems: 1 + items: + - description: Register access clock + - description: Main clock + + clock-names: + minItems: 1 + items: + - const: pclk + - const: oscclk power-domains: maxItems: 1 @@ -89,6 +111,7 @@ properties: required: - compatible - reg + - interrupts - clocks allOf: @@ -113,31 +136,38 @@ allOf: contains: enum: - renesas,rzg2l-wdt + - renesas,rzv2m-wdt then: properties: - interrupts: - maxItems: 2 - interrupt-names: - items: - - const: wdt - - const: perrout clocks: - items: - - description: Register access clock - - description: Main clock + minItems: 2 clock-names: - items: - - const: pclk - - const: oscclk + minItems: 2 required: - clock-names + else: + properties: + clocks: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - renesas,rzg2l-wdt + then: + properties: + interrupts: + minItems: 2 + interrupt-names: + minItems: 2 + required: - interrupt-names else: properties: interrupts: maxItems: 1 - clocks: - maxItems: 1 additionalProperties: false @@ -145,9 +175,11 @@ examples: - | #include <dt-bindings/clock/r8a7795-cpg-mssr.h> #include <dt-bindings/power/r8a7795-sysc.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> wdt0: watchdog@e6020000 { compatible = "renesas,r8a7795-wdt", "renesas,rcar-gen3-wdt"; reg = <0xe6020000 0x0c>; + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; resets = <&cpg 402>; diff --git a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml index b08373336b16..8fb6656ba0c2 100644 --- a/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/samsung-wdt.yaml @@ -23,6 +23,7 @@ properties: - samsung,exynos5420-wdt # for Exynos5420 - samsung,exynos7-wdt # for Exynos7 - samsung,exynos850-wdt # for Exynos850 + - samsung,exynosautov9-wdt # for Exynosautov9 reg: maxItems: 1 @@ -67,6 +68,7 @@ allOf: - samsung,exynos5420-wdt - samsung,exynos7-wdt - samsung,exynos850-wdt + - samsung,exynosautov9-wdt then: required: - samsung,syscon-phandle @@ -76,6 +78,7 @@ allOf: contains: enum: - samsung,exynos850-wdt + - samsung,exynosautov9-wdt then: properties: clocks: diff --git a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml index 6461eb4f4a27..92df6e453f64 100644 --- a/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/snps,dw-wdt.yaml @@ -20,6 +20,7 @@ properties: - enum: - rockchip,px30-wdt - rockchip,rk3066-wdt + - rockchip,rk3128-wdt - rockchip,rk3188-wdt - rockchip,rk3228-wdt - rockchip,rk3288-wdt diff --git a/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml index 690e19ce4b87..eba083822d1f 100644 --- a/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml +++ b/Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml @@ -35,20 +35,16 @@ additionalProperties: false examples: - | + #include <dt-bindings/clock/toshiba,tmpv770x.h> + soc { #address-cells = <2>; #size-cells = <2>; - wdt_clk: wdt-clk { - compatible = "fixed-clock"; - clock-frequency = <150000000>; - #clock-cells = <0>; - }; - - watchdog@28330000 { + wdt: watchdog@28330000 { compatible = "toshiba,visconti-wdt"; reg = <0 0x28330000 0 0x1000>; - clocks = <&wdt_clk>; timeout-sec = <20>; + clocks = <&pismu TMPV770X_CLK_WDTCLK>; }; }; diff --git a/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml new file mode 100644 index 000000000000..493a1c954707 --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/xlnx,xps-timebase-wdt.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/watchdog/xlnx,xps-timebase-wdt.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx AXI/PLB softcore and window Watchdog Timer + +maintainers: + - Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> + - Srinivas Neeli <srinivas.neeli@xilinx.com> + +description: + The Timebase watchdog timer(WDT) is a free-running 32 bit counter. + WDT uses a dual-expiration architecture. After one expiration of + the timeout interval, an interrupt is generated and the WDT state + bit is set to one in the status register. If the state bit is not + cleared (by writing a one to the state bit) before the next + expiration of the timeout interval, a WDT reset is generated. + +allOf: + - $ref: watchdog.yaml# + +properties: + compatible: + enum: + - xlnx,xps-timebase-wdt-1.01.a + - xlnx,xps-timebase-wdt-1.00.a + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-frequency: + description: Frequency of clock in Hz + + xlnx,wdt-interval: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Watchdog timeout interval + minimum: 8 + maximum: 32 + + xlnx,wdt-enable-once: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: If watchdog is configured as enable once, + then the watchdog cannot be disabled after + it has been enabled. + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + watchdog@40100000 { + compatible = "xlnx,xps-timebase-wdt-1.00.a"; + reg = <0x40100000 0x1000>; + clock-frequency = <50000000>; + clocks = <&clkc 15>; + xlnx,wdt-enable-once = <0x0>; + xlnx,wdt-interval = <0x1b>; + }; +... diff --git a/Documentation/driver-api/vfio-mediated-device.rst b/Documentation/driver-api/vfio-mediated-device.rst index f47dca6645aa..fdf7d69378ec 100644 --- a/Documentation/driver-api/vfio-mediated-device.rst +++ b/Documentation/driver-api/vfio-mediated-device.rst @@ -58,19 +58,19 @@ devices as examples, as these devices are the first devices to use this module:: | MDEV CORE | | MODULE | | mdev.ko | - | +-----------+ | mdev_register_device() +--------------+ + | +-----------+ | mdev_register_parent() +--------------+ | | | +<------------------------+ | | | | | | nvidia.ko |<-> physical | | | +------------------------>+ | device | | | | callbacks +--------------+ | | Physical | | - | | device | | mdev_register_device() +--------------+ + | | device | | mdev_register_parent() +--------------+ | | interface | |<------------------------+ | | | | | | i915.ko |<-> physical | | | +------------------------>+ | device | | | | callbacks +--------------+ | | | | - | | | | mdev_register_device() +--------------+ + | | | | mdev_register_parent() +--------------+ | | | +<------------------------+ | | | | | | ccw_device.ko|<-> physical | | | +------------------------>+ | device @@ -103,7 +103,8 @@ structure to represent a mediated device's driver:: struct mdev_driver { int (*probe) (struct mdev_device *dev); void (*remove) (struct mdev_device *dev); - struct attribute_group **supported_type_groups; + unsigned int (*get_available)(struct mdev_type *mtype); + ssize_t (*show_description)(struct mdev_type *mtype, char *buf); struct device_driver driver; }; @@ -125,8 +126,8 @@ vfio_device_ops. When a driver wants to add the GUID creation sysfs to an existing device it has probe'd to then it should call:: - int mdev_register_device(struct device *dev, - struct mdev_driver *mdev_driver); + int mdev_register_parent(struct mdev_parent *parent, struct device *dev, + struct mdev_driver *mdev_driver); This will provide the 'mdev_supported_types/XX/create' files which can then be used to trigger the creation of a mdev_device. The created mdev_device will be @@ -134,7 +135,7 @@ attached to the specified driver. When the driver needs to remove itself it calls:: - void mdev_unregister_device(struct device *dev); + void mdev_unregister_parent(struct mdev_parent *parent); Which will unbind and destroy all the created mdevs and remove the sysfs files. @@ -200,17 +201,14 @@ Directories and files under the sysfs for Each Physical Device sprintf(buf, "%s-%s", dev_driver_string(parent->dev), group->name); - (or using mdev_parent_dev(mdev) to arrive at the parent device outside - of the core mdev code) - * device_api - This attribute should show which device API is being created, for example, + This attribute shows which device API is being created, for example, "vfio-pci" for a PCI device. * available_instances - This attribute should show the number of devices of type <type-id> that can be + This attribute shows the number of devices of type <type-id> that can be created. * [device] @@ -220,11 +218,11 @@ Directories and files under the sysfs for Each Physical Device * name - This attribute should show human readable name. This is optional attribute. + This attribute shows a human readable name. * description - This attribute should show brief features/description of the type. This is + This attribute can show brief features/description of the type. This is an optional attribute. Directories and Files Under the sysfs for Each mdev Device diff --git a/Documentation/fault-injection/notifier-error-inject.rst b/Documentation/fault-injection/notifier-error-inject.rst index 1668b6e48d3a..fdf2dc433ead 100644 --- a/Documentation/fault-injection/notifier-error-inject.rst +++ b/Documentation/fault-injection/notifier-error-inject.rst @@ -91,8 +91,8 @@ For more usage examples There are tools/testing/selftests using the notifier error injection features for CPU and memory notifiers. - * tools/testing/selftests/cpu-hotplug/on-off-test.sh - * tools/testing/selftests/memory-hotplug/on-off-test.sh + * tools/testing/selftests/cpu-hotplug/cpu-on-off-test.sh + * tools/testing/selftests/memory-hotplug/mem-on-off-test.sh These scripts first do simple online and offline tests and then do fault injection tests if notifier error injection module is available. diff --git a/Documentation/filesystems/ceph.rst b/Documentation/filesystems/ceph.rst index 4942e018db85..76ce938e7024 100644 --- a/Documentation/filesystems/ceph.rst +++ b/Documentation/filesystems/ceph.rst @@ -203,7 +203,6 @@ For more information on Ceph, see the home page at The Linux kernel client source tree is available at - https://github.com/ceph/ceph-client.git - - git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client.git and the source for the full system is at https://github.com/ceph/ceph.git diff --git a/Documentation/filesystems/ubifs.rst b/Documentation/filesystems/ubifs.rst index e6ee99762534..ced2f7679ddb 100644 --- a/Documentation/filesystems/ubifs.rst +++ b/Documentation/filesystems/ubifs.rst @@ -59,7 +59,7 @@ differences. * JFFS2 is a write-through file-system, while UBIFS supports write-back, which makes UBIFS much faster on writes. -Similarly to JFFS2, UBIFS supports on-the-flight compression which makes +Similarly to JFFS2, UBIFS supports on-the-fly compression which makes it possible to fit quite a lot of data to the flash. Similarly to JFFS2, UBIFS is tolerant of unclean reboots and power-cuts. diff --git a/Documentation/mm/page_owner.rst b/Documentation/mm/page_owner.rst index f18fd8907049..127514955a5e 100644 --- a/Documentation/mm/page_owner.rst +++ b/Documentation/mm/page_owner.rst @@ -38,22 +38,10 @@ not affect to allocation performance, especially if the static keys jump label patching functionality is available. Following is the kernel's code size change due to this facility. -- Without page owner:: - - text data bss dec hex filename - 48392 2333 644 51369 c8a9 mm/page_alloc.o - -- With page owner:: - - text data bss dec hex filename - 48800 2445 644 51889 cab1 mm/page_alloc.o - 6662 108 29 6799 1a8f mm/page_owner.o - 1025 8 8 1041 411 mm/page_ext.o - -Although, roughly, 8 KB code is added in total, page_alloc.o increase by -520 bytes and less than half of it is in hotpath. Building the kernel with -page owner and turning it on if needed would be great option to debug -kernel memory problem. +Although enabling page owner increases kernel size by several kilobytes, +most of this code is outside page allocator and its hot path. Building +the kernel with page owner and turning it on if needed would be great +option to debug kernel memory problem. There is one notice that is caused by implementation detail. page owner stores information into the memory from struct page extension. This memory diff --git a/Documentation/networking/phy.rst b/Documentation/networking/phy.rst index 06f4fcdb58b6..d11329a08984 100644 --- a/Documentation/networking/phy.rst +++ b/Documentation/networking/phy.rst @@ -120,7 +120,7 @@ required delays, as defined per the RGMII standard, several options may be available: * Some SoCs may offer a pin pad/mux/controller capable of configuring a given - set of pins'strength, delays, and voltage; and it may be a suitable + set of pins' strength, delays, and voltage; and it may be a suitable option to insert the expected 2ns RGMII delay. * Modifying the PCB design to include a fixed delay (e.g: using a specifically diff --git a/Documentation/process/howto.rst b/Documentation/process/howto.rst index cd6997a9d203..bd15c393ba3c 100644 --- a/Documentation/process/howto.rst +++ b/Documentation/process/howto.rst @@ -379,7 +379,7 @@ to subscribe and unsubscribe from the list can be found at: There are archives of the mailing list on the web in many different places. Use a search engine to find these archives. For example: - http://dir.gmane.org/gmane.linux.kernel + https://lore.kernel.org/lkml/ It is highly recommended that you search the archives about the topic you want to bring up, before you post it to the list. A lot of things diff --git a/Documentation/riscv/index.rst b/Documentation/riscv/index.rst index e23b876ad6eb..2e5b18fbb145 100644 --- a/Documentation/riscv/index.rst +++ b/Documentation/riscv/index.rst @@ -8,6 +8,7 @@ RISC-V architecture boot-image-header vm-layout patch-acceptance + uabi features diff --git a/Documentation/riscv/uabi.rst b/Documentation/riscv/uabi.rst new file mode 100644 index 000000000000..21a82cfb6c4d --- /dev/null +++ b/Documentation/riscv/uabi.rst @@ -0,0 +1,6 @@ +.. SPDX-License-Identifier: GPL-2.0 + +RISC-V Linux User ABI +===================== + +Misaligned accesses are supported in userspace, but they may perform poorly. diff --git a/Documentation/s390/vfio-ap.rst b/Documentation/s390/vfio-ap.rst index 61a0a3c6c7b4..00f4a04f6d4c 100644 --- a/Documentation/s390/vfio-ap.rst +++ b/Documentation/s390/vfio-ap.rst @@ -297,7 +297,7 @@ of the VFIO AP mediated device driver:: | MDEV CORE | | MODULE | | mdev.ko | - | +---------+ | mdev_register_device() +--------------+ + | +---------+ | mdev_register_parent() +--------------+ | |Physical | +<-----------------------+ | | | device | | | vfio_ap.ko |<-> matrix | |interface| +----------------------->+ | device diff --git a/Documentation/s390/vfio-ccw.rst b/Documentation/s390/vfio-ccw.rst index 8aad08a8b8a5..ea928a3806f4 100644 --- a/Documentation/s390/vfio-ccw.rst +++ b/Documentation/s390/vfio-ccw.rst @@ -156,7 +156,7 @@ Below is a high Level block diagram:: | MDEV CORE | | MODULE | | mdev.ko | - | +---------+ | mdev_register_device() +--------------+ + | +---------+ | mdev_register_parent() +--------------+ | |Physical | +<-----------------------+ | | | device | | | vfio_ccw.ko |<-> subchannel | |interface| +----------------------->+ | device diff --git a/Documentation/tools/rtla/rtla-timerlat-top.rst b/Documentation/tools/rtla/rtla-timerlat-top.rst index 1c321de1c171..7c4e4b109493 100644 --- a/Documentation/tools/rtla/rtla-timerlat-top.rst +++ b/Documentation/tools/rtla/rtla-timerlat-top.rst @@ -39,7 +39,7 @@ higher than *30 us*. It is also set to stop the session if a *Thread* timer latency higher than *30 us* is hit. Finally, it is set to save the trace buffer if the stop condition is hit:: - [root@alien ~]# rtla timerlat top -s 30 -t 30 -T + [root@alien ~]# rtla timerlat top -s 30 -T 30 -t Timer Latency 0 00:00:59 | IRQ Timer Latency (us) | Thread Timer Latency (us) CPU COUNT | cur min avg max | cur min avg max diff --git a/Documentation/trace/ftrace.rst b/Documentation/trace/ftrace.rst index b37dc19e4d40..60bceb018d6a 100644 --- a/Documentation/trace/ftrace.rst +++ b/Documentation/trace/ftrace.rst @@ -564,7 +564,7 @@ of ftrace. Here is a list of some of the key files: start:: - trace_fd = open("trace_marker", WR_ONLY); + trace_fd = open("trace_marker", O_WRONLY); Note: Writing into the trace_marker file can also initiate triggers that are written into /sys/kernel/tracing/events/ftrace/print/trigger diff --git a/Documentation/translations/it_IT/process/howto.rst b/Documentation/translations/it_IT/process/howto.rst index 16ad5622d549..15c08aea1dfe 100644 --- a/Documentation/translations/it_IT/process/howto.rst +++ b/Documentation/translations/it_IT/process/howto.rst @@ -394,7 +394,7 @@ trovati al sito: Ci sono diversi archivi della lista di discussione. Usate un qualsiasi motore di ricerca per trovarli. Per esempio: - http://dir.gmane.org/gmane.linux.kernel + https://lore.kernel.org/lkml/ É caldamente consigliata una ricerca in questi archivi sul tema che volete sollevare, prima di pubblicarlo sulla lista. Molte cose sono già state diff --git a/Documentation/translations/ja_JP/howto.rst b/Documentation/translations/ja_JP/howto.rst index 649e2ff2a407..b47a682d8ded 100644 --- a/Documentation/translations/ja_JP/howto.rst +++ b/Documentation/translations/ja_JP/howto.rst @@ -410,7 +410,7 @@ https://bugzilla.kernel.org に行ってください。もし今後のバグレ このメーリングリストのアーカイブは web 上の多数の場所に存在します。こ れらのアーカイブを探すにはサーチエンジンを使いましょう。例えば- - http://dir.gmane.org/gmane.linux.kernel + https://lore.kernel.org/lkml/ リストに投稿する前にすでにその話題がアーカイブに存在するかどうかを検索 することを是非やってください。多数の事がすでに詳細に渡って議論されてお diff --git a/Documentation/translations/ko_KR/howto.rst b/Documentation/translations/ko_KR/howto.rst index e43970584ca4..df53fafd1b10 100644 --- a/Documentation/translations/ko_KR/howto.rst +++ b/Documentation/translations/ko_KR/howto.rst @@ -386,7 +386,7 @@ https://bugzilla.kernel.org 를 체크하고자 할 수도 있다; 소수의 커 웹상의 많은 다른 곳에도 메일링 리스트의 아카이브들이 있다. 이러한 아카이브들을 찾으려면 검색 엔진을 사용하라. 예를 들어: - http://dir.gmane.org/gmane.linux.kernel + https://lore.kernel.org/lkml/ 여러분이 새로운 문제에 관해 리스트에 올리기 전에 말하고 싶은 주제에 관한 것을 아카이브에서 먼저 찾아보기를 강력히 권장한다. 이미 상세하게 토론된 많은 diff --git a/Documentation/translations/zh_CN/arch.rst b/Documentation/translations/zh_CN/arch.rst new file mode 100644 index 000000000000..690e173d8b2a --- /dev/null +++ b/Documentation/translations/zh_CN/arch.rst @@ -0,0 +1,29 @@ +.. SPDX-License-Identifier: GPL-2.0 + +处理器体系结构 +============== + +以下文档提供了具体架构实现的编程细节。 + +.. toctree:: + :maxdepth: 2 + + mips/index + arm64/index + riscv/index + openrisc/index + parisc/index + loongarch/index + +TODOList: + +* arm/index +* ia64/index +* m68k/index +* nios2/index +* powerpc/index +* s390/index +* sh/index +* sparc/index +* x86/index +* xtensa/index diff --git a/Documentation/translations/zh_CN/devicetree/changesets.rst b/Documentation/translations/zh_CN/devicetree/changesets.rst index 2ace05f3c377..3df1b03c5695 100644 --- a/Documentation/translations/zh_CN/devicetree/changesets.rst +++ b/Documentation/translations/zh_CN/devicetree/changesets.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 .. include:: ../disclaimer-zh_CN.rst -:Original: Documentation/Devicetree/changesets.rst +:Original: Documentation/devicetree/changesets.rst :翻译: diff --git a/Documentation/translations/zh_CN/devicetree/dynamic-resolution-notes.rst b/Documentation/translations/zh_CN/devicetree/dynamic-resolution-notes.rst index 115190341305..6dfd946d7093 100644 --- a/Documentation/translations/zh_CN/devicetree/dynamic-resolution-notes.rst +++ b/Documentation/translations/zh_CN/devicetree/dynamic-resolution-notes.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 .. include:: ../disclaimer-zh_CN.rst -:Original: Documentation/Devicetree/dynamic-resolution-notes.rst +:Original: Documentation/devicetree/dynamic-resolution-notes.rst :翻译: diff --git a/Documentation/translations/zh_CN/devicetree/kernel-api.rst b/Documentation/translations/zh_CN/devicetree/kernel-api.rst index 6aa3b685494e..2fb729368b40 100644 --- a/Documentation/translations/zh_CN/devicetree/kernel-api.rst +++ b/Documentation/translations/zh_CN/devicetree/kernel-api.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 .. include:: ../disclaimer-zh_CN.rst -:Original: Documentation/Devicetree/kernel-api.rst +:Original: Documentation/devicetree/kernel-api.rst :翻译: diff --git a/Documentation/translations/zh_CN/devicetree/overlay-notes.rst b/Documentation/translations/zh_CN/devicetree/overlay-notes.rst index 1bd482cb0a1b..43e3c0bc5a9f 100644 --- a/Documentation/translations/zh_CN/devicetree/overlay-notes.rst +++ b/Documentation/translations/zh_CN/devicetree/overlay-notes.rst @@ -1,7 +1,7 @@ .. SPDX-License-Identifier: GPL-2.0 .. include:: ../disclaimer-zh_CN.rst -:Original: Documentation/Devicetree/overlay-notes.rst +:Original: Documentation/devicetree/overlay-notes.rst :翻译: diff --git a/Documentation/translations/zh_CN/index.rst b/Documentation/translations/zh_CN/index.rst index 2fc60e60feb4..ec99ef5fe990 100644 --- a/Documentation/translations/zh_CN/index.rst +++ b/Documentation/translations/zh_CN/index.rst @@ -26,165 +26,100 @@ 顺便说下，中文文档也需要遵守内核编码风格，风格中中文和英文的主要不同就是中文 的字符标点占用两个英文字符宽度， 所以，当英文要求不要超过每行100个字符时， 中文就不要超过50个字符。另外，也要注意'-'，'=' 等符号与相关标题的对齐。在将 -补丁提交到社区之前，一定要进行必要的checkpatch.pl检查和编译测试。 +补丁提交到社区之前，一定要进行必要的 ``checkpatch.pl`` 检查和编译测试。 -许可证文档 ----------- - -下面的文档介绍了Linux内核源代码的许可证（GPLv2）、如何在源代码树中正确标记 -单个文件的许可证、以及指向完整许可证文本的链接。 +与Linux 内核社区一起工作 +------------------------ -* Documentation/translations/zh_CN/process/license-rules.rst - -用户文档 --------- - -下面的手册是为内核用户编写的——即那些试图让它在给定系统上以最佳方式工作的 -用户。 +与内核开发社区进行协作并将工作推向上游的基本指南。 .. toctree:: - :maxdepth: 2 + :maxdepth: 1 - admin-guide/index - -TODOList: - -* kbuild/index + process/development-process + process/submitting-patches + 行为准则 <process/code-of-conduct> + maintainer/index + 完整开发流程文档 <process/index> -固件相关文档 ------------- +内部API文档 +----------- -下列文档描述了内核需要的平台固件相关信息。 +开发人员使用的内核内部交互接口手册。 .. toctree:: - :maxdepth: 2 + :maxdepth: 1 - devicetree/index + core-api/index + driver-api/index + 内核中的锁 <locking/index> TODOList: -* firmware-guide/index - -应用程序开发人员文档 --------------------- - -用户空间API手册涵盖了描述应用程序开发人员可见内核接口方面的文档。 +* subsystem-apis -TODOlist: +开发工具和流程 +-------------- -* userspace-api/index - -内核开发简介 ------------- - -这些手册包含有关如何开发内核的整体信息。内核社区非常庞大，一年下来有数千名 -开发人员做出贡献。与任何大型社区一样，知道如何完成任务将使得更改合并的过程 -变得更加容易。 +为所有内核开发人员提供有用信息的各种其他手册。 .. toctree:: - :maxdepth: 2 + :maxdepth: 1 - process/index - dev-tools/index + process/license-rules doc-guide/index + dev-tools/index + dev-tools/testing-overview kernel-hacking/index - maintainer/index TODOList: * trace/index * fault-injection/index * livepatch/index -* rust/index -内核API文档 ------------ +面向用户的文档 +-------------- -以下手册从内核开发人员的角度详细介绍了特定的内核子系统是如何工作的。这里的 -大部分信息都是直接从内核源代码获取的，并根据需要添加补充材料（或者至少是在 -我们设法添加的时候——可能不是所有的都是有需要的）。 +下列手册针对 +希望内核在给定系统上以最佳方式工作的*用户*， +和查找内核用户空间API信息的程序开发人员。 .. toctree:: - :maxdepth: 2 + :maxdepth: 1 - core-api/index - driver-api/index - locking/index - accounting/index - cpu-freq/index - iio/index - infiniband/index - power/index - virt/index - sound/index - filesystems/index - scheduler/index - mm/index - peci/index - PCI/index + admin-guide/index + admin-guide/reporting-issues.rst TODOList: -* block/index -* cdrom/index -* ide/index -* fb/index -* fpga/index -* hid/index -* i2c/index -* isdn/index -* leds/index -* netlabel/index -* networking/index -* pcmcia/index -* target/index -* timers/index -* spi/index -* w1/index -* watchdog/index -* input/index -* hwmon/index -* gpu/index -* security/index -* crypto/index -* bpf/index -* usb/index -* scsi/index -* misc-devices/index -* mhi/index - -体系结构无关文档 ----------------- +* 内核构建系统 <kbuild/index> +* 用户空间工具 <tools/index> +* userspace-api/index -TODOList: +也可参考独立于内核文档的 `Linux 手册页 <https://www.kernel.org/doc/man-pages/>`_ 。 -* asm-annotations +固件相关文档 +------------ -特定体系结构文档 ----------------- +下列文档描述了内核需要的平台固件相关信息。 .. toctree:: :maxdepth: 2 - mips/index - arm64/index - riscv/index - openrisc/index - parisc/index - loongarch/index + devicetree/index TODOList: -* arm/index -* ia64/index -* m68k/index -* nios2/index -* powerpc/index -* s390/index -* sh/index -* sparc/index -* x86/index -* xtensa/index +* firmware-guide/index + +体系结构文档 +------------ + +.. toctree:: + :maxdepth: 2 + + arch 其他文档 -------- @@ -195,9 +130,9 @@ TODOList: TODOList: * staging/index -* watch_queue -目录和表格 + +索引和表格 ---------- * :ref:`genindex` diff --git a/Documentation/translations/zh_CN/mm/ksm.rst b/Documentation/translations/zh_CN/mm/ksm.rst index d1f82e857ad7..f0f458753d0c 100644 --- a/Documentation/translations/zh_CN/mm/ksm.rst +++ b/Documentation/translations/zh_CN/mm/ksm.rst @@ -30,7 +30,7 @@ KSM的用户空间的接口在Documentation/translations/zh_CN/admin-guide/mm/ks KSM维护着稳定树中的KSM页的逆映射信息。 当KSM页面的共享数小于 ``max_page_sharing`` 的虚拟内存区域(VMAs)时，则代表了 -KSM页的稳定树其中的节点指向了一个rmap_item结构体类型的列表。同时，这个KSM页 +KSM页的稳定树其中的节点指向了一个ksm_rmap_item结构体类型的列表。同时，这个KSM页 的 ``page->mapping`` 指向了该稳定树节点。 如果共享数超过了阈值，KSM将给稳定树添加第二个维度。稳定树就变成链接一个或多 diff --git a/Documentation/translations/zh_CN/mm/page_owner.rst b/Documentation/translations/zh_CN/mm/page_owner.rst index b7f81d7a6589..21a6a0837d42 100644 --- a/Documentation/translations/zh_CN/mm/page_owner.rst +++ b/Documentation/translations/zh_CN/mm/page_owner.rst @@ -74,15 +74,19 @@ page owner在默认情况下是禁用的。所以，如果你想使用它，你 cat /sys/kernel/debug/page_owner > page_owner_full.txt ./page_owner_sort page_owner_full.txt sorted_page_owner.txt - ``page_owner_full.txt`` 的一般输出情况如下(输出信息无翻译价值):: + ``page_owner_full.txt`` 的一般输出情况如下:: Page allocated via order XXX, ... PFN XXX ... - // Detailed stack + // 栈详情 Page allocated via order XXX, ... PFN XXX ... - // Detailed stack + // 栈详情 + 默认情况下，它将以一个给定的pfn开始，做完整的pfn转储，且page_owner支持fseek。 + + FILE *fp = fopen("/sys/kernel/debug/page_owner", "r"); + fseek(fp, pfn_start, SEEK_SET); ``page_owner_sort`` 工具忽略了 ``PFN`` 行，将剩余的行放在buf中，使用regexp提 取页序值，计算buf的次数和页数，最后根据参数进行排序。 diff --git a/Documentation/translations/zh_CN/process/howto.rst b/Documentation/translations/zh_CN/process/howto.rst index 1455190dc087..5bf953146929 100644 --- a/Documentation/translations/zh_CN/process/howto.rst +++ b/Documentation/translations/zh_CN/process/howto.rst @@ -306,7 +306,7 @@ bugzilla.kernel.org是Linux内核开发者们用来跟踪内核Bug的网站。 网上很多地方都有这个邮件列表的存档(archive)。可以使用搜索引擎来找到这些 存档。比如： - http://dir.gmane.org/gmane.linux.kernel + https://lore.kernel.org/lkml/ 在发信之前，我们强烈建议你先在存档中搜索你想要讨论的问题。很多已经被详细 讨论过的问题只在邮件列表的存档中可以找到。 diff --git a/Documentation/translations/zh_CN/process/index.rst b/Documentation/translations/zh_CN/process/index.rst index a683dbea0c83..a1a35f88f4ae 100644 --- a/Documentation/translations/zh_CN/process/index.rst +++ b/Documentation/translations/zh_CN/process/index.rst @@ -10,6 +10,7 @@ .. _cn_process_index: +======================== 与Linux 内核社区一起工作 ======================== diff --git a/Documentation/translations/zh_TW/process/howto.rst b/Documentation/translations/zh_TW/process/howto.rst index 68ae4411285b..86b0d4c6d6f9 100644 --- a/Documentation/translations/zh_TW/process/howto.rst +++ b/Documentation/translations/zh_TW/process/howto.rst @@ -309,7 +309,7 @@ bugzilla.kernel.org是Linux內核開發者們用來跟蹤內核Bug的網站。 網上很多地方都有這個郵件列表的存檔(archive)。可以使用搜尋引擎來找到這些 存檔。比如： - http://dir.gmane.org/gmane.linux.kernel + https://lore.kernel.org/lkml/ 在發信之前，我們強烈建議你先在存檔中搜索你想要討論的問題。很多已經被詳細 討論過的問題只在郵件列表的存檔中可以找到。 diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index 236a797be71c..eee9f857a986 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -7918,8 +7918,8 @@ guest according to the bits in the KVM_CPUID_FEATURES CPUID leaf (0x40000001). Otherwise, a guest may use the paravirtual features regardless of what has actually been exposed through the CPUID leaf. -8.29 KVM_CAP_DIRTY_LOG_RING ---------------------------- +8.29 KVM_CAP_DIRTY_LOG_RING/KVM_CAP_DIRTY_LOG_RING_ACQ_REL +---------------------------------------------------------- :Architectures: x86 :Parameters: args[0] - size of the dirty log ring @@ -7977,6 +7977,11 @@ on to the next GFN. The userspace should continue to do this until the flags of a GFN have the DIRTY bit cleared, meaning that it has harvested all the dirty GFNs that were available. +Note that on weakly ordered architectures, userspace accesses to the +ring buffer (and more specifically the 'flags' field) must be ordered, +using load-acquire/store-release accessors when available, or any +other memory barrier that will ensure this ordering. + It's not necessary for userspace to harvest the all dirty GFNs at once. However it must collect the dirty GFNs in sequence, i.e., the userspace program cannot skip one dirty GFN to collect the one next to it. @@ -8005,6 +8010,14 @@ KVM_CAP_DIRTY_LOG_RING with an acceptable dirty ring size, the virtual machine will switch to ring-buffer dirty page tracking and further KVM_GET_DIRTY_LOG or KVM_CLEAR_DIRTY_LOG ioctls will fail. +NOTE: KVM_CAP_DIRTY_LOG_RING_ACQ_REL is the only capability that +should be exposed by weakly ordered architecture, in order to indicate +the additional memory ordering requirements imposed on userspace when +reading the state of an entry and mutating it from DIRTY to HARVESTED. +Architecture with TSO-like ordering (such as x86) are allowed to +expose both KVM_CAP_DIRTY_LOG_RING and KVM_CAP_DIRTY_LOG_RING_ACQ_REL +to userspace. + 8.30 KVM_CAP_XEN_HVM -------------------- |