diff options
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8mp.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/freescale/imx8mp.dtsi | 88 |
1 files changed, 84 insertions, 4 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index 9f6ba763238d..45e2c0a4e889 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -7,6 +7,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> #include "imx8mp-pinfunc.h" @@ -43,6 +44,7 @@ clocks = <&clk IMX8MP_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + #cooling-cells = <2>; }; A53_1: cpu@1 { @@ -53,6 +55,7 @@ clocks = <&clk IMX8MP_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + #cooling-cells = <2>; }; A53_2: cpu@2 { @@ -63,6 +66,7 @@ clocks = <&clk IMX8MP_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + #cooling-cells = <2>; }; A53_3: cpu@3 { @@ -73,6 +77,7 @@ clocks = <&clk IMX8MP_CLK_ARM>; enable-method = "psci"; next-level-cache = <&A53_L2>; + #cooling-cells = <2>; }; A53_L2: l2-cache0 { @@ -127,6 +132,68 @@ method = "smc"; }; + thermal-zones { + cpu-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 0>; + trips { + cpu_alert0: trip0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit0: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert0>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + soc-thermal { + polling-delay-passive = <250>; + polling-delay = <2000>; + thermal-sensors = <&tmu 1>; + trips { + soc_alert0: trip0 { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + soc_crit0: trip1 { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&soc_alert0>; + cooling-device = + <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, @@ -215,6 +282,13 @@ gpio-ranges = <&iomuxc 0 114 30>; }; + tmu: tmu@30260000 { + compatible = "fsl,imx8mp-tmu"; + reg = <0x30260000 0x10000>; + clocks = <&clk IMX8MP_CLK_TSENSOR_ROOT>; + #thermal-sensor-cells = <1>; + }; + wdog1: watchdog@30280000 { compatible = "fsl,imx8mp-wdt", "fsl,imx21-wdt"; reg = <0x30280000 0x10000>; @@ -286,7 +360,9 @@ <&clk_ext3>, <&clk_ext4>; clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2", "clk_ext3", "clk_ext4"; - assigned-clocks = <&clk IMX8MP_CLK_NOC>, + assigned-clocks = <&clk IMX8MP_CLK_A53_SRC>, + <&clk IMX8MP_CLK_A53_CORE>, + <&clk IMX8MP_CLK_NOC>, <&clk IMX8MP_CLK_NOC_IO>, <&clk IMX8MP_CLK_GIC>, <&clk IMX8MP_CLK_AUDIO_AHB>, @@ -294,12 +370,15 @@ <&clk IMX8MP_CLK_IPG_AUDIO_ROOT>, <&clk IMX8MP_AUDIO_PLL1>, <&clk IMX8MP_AUDIO_PLL2>; - assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, + assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_800M>, + <&clk IMX8MP_ARM_PLL_OUT>, + <&clk IMX8MP_SYS_PLL2_1000M>, <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_SYS_PLL2_500M>, <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_SYS_PLL1_800M>; - assigned-clock-rates = <1000000000>, + assigned-clock-rates = <0>, <0>, + <1000000000>, <800000000>, <500000000>, <400000000>, @@ -312,6 +391,7 @@ src: reset-controller@30390000 { compatible = "fsl,imx8mp-src", "syscon"; reg = <0x30390000 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; #reset-cells = <1>; }; }; @@ -615,7 +695,7 @@ }; fec: ethernet@30be0000 { - compatible = "fsl,imx8mp-fec", "fsl,imx8mq-fec"; + compatible = "fsl,imx8mp-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec"; reg = <0x30be0000 0x10000>; interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, |