diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/msm8992.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/msm8992.dtsi | 566 |
1 files changed, 435 insertions, 131 deletions
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi index 2021795c99ad..188fff2095f1 100644 --- a/arch/arm64/boot/dts/qcom/msm8992.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi @@ -6,10 +6,6 @@ #include <dt-bindings/clock/qcom,gcc-msm8994.h> / { - model = "Qualcomm Technologies, Inc. MSM 8992"; - compatible = "qcom,msm8992"; - // msm-id needed by bootloader for selecting correct blob - qcom,msm-id = <251 0>, <252 0>; interrupt-parent = <&intc>; #address-cells = <2>; @@ -20,55 +16,139 @@ cpus { #address-cells = <2>; #size-cells = <0>; - cpu-map { - cluster0 { - core0 { - cpu = <&CPU0>; - }; - }; - }; CPU0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0x0 0x0>; next-level-cache = <&L2_0>; + enable-method = "psci"; L2_0: l2-cache { compatible = "cache"; cache-level = <2>; }; }; + + CPU1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CPU2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CPU3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + next-level-cache = <&L2_0>; + enable-method = "psci"; + }; + + CPU4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x100>; + next-level-cache = <&L2_1>; + enable-method = "psci"; + L2_1: l2-cache { + compatible = "cache"; + cache-level = <2>; + }; + }; + + CPU5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0 0x101>; + next-level-cache = <&L2_1>; + enable-method = "psci"; + }; + + cpu-map { + cluster0 { + core0 { + cpu = <&CPU0>; + }; + + core1 { + cpu = <&CPU1>; + }; + + core2 { + cpu = <&CPU2>; + }; + + core3 { + cpu = <&CPU3>; + }; + }; + + cluster1 { + core0 { + cpu = <&CPU4>; + }; + + core1 { + cpu = <&CPU5>; + }; + }; + }; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, - <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + clocks { + xo_board: xo_board { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + }; + + sleep_clk: sleep_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + firmware { + scm { + compatible = "qcom,scm-msm8994", "qcom,scm"; + }; }; - xo_board: xo_board { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <19200000>; + memory { + device_type = "memory"; + /* We expect the bootloader to fill in the reg */ + reg = <0 0 0 0>; }; - sleep_clk: sleep_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(4)| IRQ_TYPE_LEVEL_HIGH)>; }; - vreg_vph_pwr: vreg-vph-pwr { - compatible = "regulator-fixed"; - status = "okay"; - regulator-name = "vph-pwr"; + psci { + compatible = "arm,psci-0.2"; + method = "hvc"; + }; - regulator-min-microvolt = <3600000>; - regulator-max-microvolt = <3600000>; + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; - regulator-always-on; + smem_region: smem@6a00000 { + reg = <0x0 0x6a00000 0x0 0x200000>; + no-map; + }; }; sfpb_mutex: hwmutex { @@ -98,9 +178,10 @@ <0xf9002000 0x1000>; }; - apcs: syscon@f900d000 { - compatible = "syscon"; + apcs: mailbox@f900d000 { + compatible = "qcom,msm8994-apcs-kpss-global", "syscon"; reg = <0xf900d000 0x2000>; + #mbox-cells = <1>; }; timer@f9020000 { @@ -161,63 +242,147 @@ }; }; - restart@fc4ab000 { - compatible = "qcom,pshold"; - reg = <0xfc4ab000 0x4>; - }; + sdhc_1: sdhci@f9824900 { + compatible = "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; + reg-names = "hc_mem", "core_mem"; - msmgpio: pinctrl@fd510000 { - compatible = "qcom,msm8994-pinctrl"; - reg = <0xfd510000 0x4000>; - interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - gpio-ranges = <&msmgpio 0 0 146>; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; + interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "hc_irq", "pwr_irq"; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, + <&gcc GCC_SDCC1_AHB_CLK>, + <&xo_board>; + clock-names = "core", "iface", "xo"; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on + &sdc1_rclk_on>; + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off + &sdc1_rclk_off>; + + regulator-always-on; + bus-width = <8>; + non-removable; + + status = "disabled"; }; blsp1_uart2: serial@f991e000 { compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; reg = <0xf991e000 0x1000>; interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>; - status = "disabled"; clock-names = "core", "iface"; - clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>, - <&clock_gcc GCC_BLSP1_AHB_CLK>; + clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, + <&gcc GCC_BLSP1_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp1_uart2_default>; + pinctrl-1 = <&blsp1_uart2_sleep>; + status = "disabled"; }; - clock_gcc: clock-controller@fc400000 { - compatible = "qcom,gcc-msm8994"; - #clock-cells = <1>; - #reset-cells = <1>; - #power-domain-cells = <1>; - reg = <0xfc400000 0x2000>; + blsp_i2c2: i2c@f9924000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9924000 0x500>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c2_default>; + pinctrl-1 = <&i2c2_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; }; - sdhci1: mmc@f9824900 { - compatible = "qcom,sdhci-msm-v4"; - reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>; - reg-names = "hc_mem", "core_mem"; + /* Somebody was very creative with their numbering scheme downstream... */ - interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>, - <GIC_SPI 138 IRQ_TYPE_NONE>; - interrupt-names = "hc_irq", "pwr_irq"; + blsp_i2c13: i2c@f9927000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9927000 0x500>; + interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c13_default>; + pinctrl-1 = <&i2c13_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + blsp_i2c6: i2c@f9928000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9928000 0x500>; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP1_AHB_CLK>, + <&gcc GCC_BLSP1_QUP6_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_default>; + pinctrl-1 = <&i2c6_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>, - <&clock_gcc GCC_SDCC1_AHB_CLK>; + blsp2_uart2: serial@f995e000 { + compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm"; + reg = <0xf995e000 0x1000>; + interrupt = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>; clock-names = "core", "iface"; + clocks = <&gcc GCC_BLSP2_UART2_APPS_CLK>, + <&gcc GCC_BLSP2_AHB_CLK>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&blsp2_uart2_default>; + pinctrl-1 = <&blsp2_uart2_sleep>; + status = "disabled"; + }; + blsp_i2c7: i2c@f9963000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9963000 0x500>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <400000>; pinctrl-names = "default", "sleep"; - pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on - &sdc1_rclk_on>; - pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off - &sdc1_rclk_off>; + pinctrl-0 = <&i2c7_default>; + pinctrl-1 = <&i2c7_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; - regulator-always-on; - bus-width = <8>; - mmc-hs400-1_8v; - status = "okay"; + blsp_i2c5: i2c@f9967000 { + compatible = "qcom,i2c-qup-v2.2.1"; + reg = <0xf9967000 0x500>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_BLSP2_AHB_CLK>, + <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>; + clock-names = "iface", "core"; + clock-frequency = <100000>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_default>; + pinctrl-1 = <&i2c5_sleep>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + gcc: clock-controller@fc400000 { + compatible = "qcom,gcc-msm8994"; + #clock-cells = <1>; + #reset-cells = <1>; + #power-domain-cells = <1>; + reg = <0xfc400000 0x2000>; }; rpm_msg_ram: memory@fc428000 { @@ -225,27 +390,189 @@ reg = <0xfc428000 0x4000>; }; + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; + + spmi_bus: spmi@fc4c0000 { + compatible = "qcom,spmi-pmic-arb"; + reg = <0xfc4cf000 0x1000>, + <0xfc4cb000 0x1000>, + <0xfc4ca000 0x1000>; + reg-names = "core", "intr", "cnfg"; + interrupt-names = "periph_irq"; + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>; + qcom,ee = <0>; + qcom,channel = <0>; + #address-cells = <2>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <4>; + }; + sfpb_mutex_regs: syscon@fd484000 { #address-cells = <1>; #size-cells = <1>; compatible = "syscon"; reg = <0xfd484000 0x400>; }; - }; - memory { - device_type = "memory"; - reg = <0 0 0 0>; // bootloader will update - }; + tlmm: pinctrl@fd510000 { + compatible = "qcom,msm8994-pinctrl"; + reg = <0xfd510000 0x4000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; - reserved-memory { - #address-cells = <2>; - #size-cells = <2>; - ranges; + blsp1_uart2_default: blsp1-uart2-default { + function = "blsp_uart2"; + pins = "gpio4", "gpio5"; + drive-strength = <16>; + bias-disable; + }; - smem_region: smem@6a00000 { - reg = <0x0 0x6a00000 0x0 0x200000>; - no-map; + blsp1_uart2_sleep: blsp1-uart2-sleep { + function = "gpio"; + pins = "gpio4", "gpio5"; + drive-strength = <2>; + bias-pull-down; + }; + + blsp2_uart2_default: blsp2-uart2-default { + function = "blsp_uart8"; + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + drive-strength = <16>; + bias-disable; + }; + + blsp2_uart2_sleep: blsp2-uart2-sleep { + function = "gpio"; + pins = "gpio45", "gpio46", "gpio47", "gpio48"; + drive-strength = <2>; + bias-pull-down; + }; + + sdc1_clk_on: clk-on { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <6>; + }; + + sdc1_clk_off: clk-off { + pins = "sdc1_clk"; + bias-disable; + drive-strength = <2>; + }; + + sdc1_cmd_on: cmd-on { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <6>; + }; + + sdc1_cmd_off: cmd-off { + pins = "sdc1_cmd"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_data_on: data-on { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <6>; + }; + + sdc1_data_off: data-off { + pins = "sdc1_data"; + bias-pull-up; + drive-strength = <2>; + }; + + sdc1_rclk_on: rclk-on { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + sdc1_rclk_off: rclk-off { + pins = "sdc1_rclk"; + bias-pull-down; + }; + + i2c2_default: i2c2-default { + function = "blsp_i2c2"; + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c2_sleep: i2c2-sleep { + function = "gpio"; + pins = "gpio6", "gpio7"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_default: i2c5-default { + /* Don't be fooled! Nobody knows the reason why though... */ + function = "blsp_i2c11"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + i2c5_sleep: i2c5-sleep { + function = "gpio"; + pins = "gpio83", "gpio84"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_default: i2c6-default { + function = "blsp_i2c6"; + pins = "gpio28", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + i2c6_sleep: i2c6-sleep { + function = "gpio"; + pins = "gpio28", "gpio27"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_default: i2c7-default { + function = "blsp_i2c7"; + pins = "gpio43", "gpio44"; + drive-strength = <2>; + bias-disable; + }; + + i2c7_sleep: i2c7-sleep { + function = "gpio"; + pins = "gpio43", "gpio44"; + drive-strength = <2>; + bias-disable; + }; + + i2c13_default: i2c13-default { + /* Not a typo either. */ + function = "blsp_i2c5"; + pins = "gpio23", "gpio24"; + drive-strength = <2>; + bias-disable; + }; + + i2c13_sleep: i2c13-sleep { + function = "gpio"; + pins = "gpio23", "gpio24"; + drive-strength = <2>; + bias-disable; + }; }; }; @@ -258,58 +585,35 @@ qcom,local-pid = <0>; qcom,remote-pid = <6>; - rpm-requests { + rpm_requests: rpm-requests { compatible = "qcom,rpm-msm8994"; qcom,smd-channels = "rpm_requests"; - pm8994-regulators { - compatible = "qcom,rpm-pm8994-regulators"; - - pm8994_s1: s1 {}; - pm8994_s2: s2 {}; - pm8994_s3: s3 {}; - pm8994_s4: s4 {}; - pm8994_s5: s5 {}; - pm8994_s6: s6 {}; - pm8994_s7: s7 {}; - - pm8994_l1: l1 {}; - pm8994_l2: l2 {}; - pm8994_l3: l3 {}; - pm8994_l4: l4 {}; - pm8994_l6: l6 {}; - pm8994_l8: l8 {}; - pm8994_l9: l9 {}; - pm8994_l10: l10 {}; - pm8994_l11: l11 {}; - pm8994_l12: l12 {}; - pm8994_l13: l13 {}; - pm8994_l14: l14 {}; - pm8994_l15: l15 {}; - pm8994_l16: l16 {}; - pm8994_l17: l17 {}; - pm8994_l18: l18 {}; - pm8994_l19: l19 {}; - pm8994_l20: l20 {}; - pm8994_l21: l21 {}; - pm8994_l22: l22 {}; - pm8994_l23: l23 {}; - pm8994_l24: l24 {}; - pm8994_l25: l25 {}; - pm8994_l26: l26 {}; - pm8994_l27: l27 {}; - pm8994_l28: l28 {}; - pm8994_l29: l29 {}; - pm8994_l30: l30 {}; - pm8994_l31: l31 {}; - pm8994_l32: l32 {}; - - pm8994_lvs1: lvs1 {}; - pm8994_lvs2: lvs2 {}; + rpmcc: rpmcc { + compatible = "qcom,rpmcc-msm8992"; + #clock-cells = <1>; }; }; }; }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + status = "okay"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; }; -#include "msm8992-pins.dtsi" |