diff options
Diffstat (limited to 'arch/arm')
20 files changed, 125 insertions, 9 deletions
diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index 60d61291f344..024af2db638e 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -39,6 +39,13 @@ }; + usb1 { + pinctrl_usb1_vbus_gpio: usb1_vbus_gpio { + atmel,pins = + <AT91_PIOC 5 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PC5 GPIO */ + }; + }; + mmc0_slot1 { pinctrl_board_mmc0_slot1: mmc0_slot1-board { atmel,pins = @@ -84,6 +91,8 @@ }; usb1: gadget@fffa4000 { + pinctrl-0 = <&pinctrl_usb1_vbus_gpio>; + pinctrl-names = "default"; atmel,vbus-gpio = <&pioC 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts index b4605edfd2ab..d8fa83effd63 100644 --- a/arch/arm/boot/dts/imx6q-prti6q.dts +++ b/arch/arm/boot/dts/imx6q-prti6q.dts @@ -364,8 +364,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wifi>; interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>; - ref-clock-frequency = "38400000"; - tcxo-clock-frequency = "19200000"; + ref-clock-frequency = <38400000>; + tcxo-clock-frequency = <19200000>; }; }; diff --git a/arch/arm/boot/dts/imx6q-yapp4-crux.dts b/arch/arm/boot/dts/imx6q-yapp4-crux.dts index 15f4824a5142..bddf3822ebf7 100644 --- a/arch/arm/boot/dts/imx6q-yapp4-crux.dts +++ b/arch/arm/boot/dts/imx6q-yapp4-crux.dts @@ -33,6 +33,10 @@ status = "okay"; }; +®_pu { + regulator-always-on; +}; + ®_usb_h1_vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi index 68e5ab2e27e2..6bb4855d13ce 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi @@ -29,7 +29,7 @@ user-pb { label = "user_pb"; - gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi index 8e23cec7149e..696427b487f0 100644 --- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi @@ -26,7 +26,7 @@ user-pb { label = "user_pb"; - gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>; + gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>; linux,code = <BTN_0>; }; diff --git a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts index cea165f2161a..afaf4a6759d4 100644 --- a/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts +++ b/arch/arm/boot/dts/imx6qp-yapp4-crux-plus.dts @@ -33,6 +33,10 @@ status = "okay"; }; +®_pu { + regulator-always-on; +}; + ®_usb_h1_vbus { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx7s.dtsi b/arch/arm/boot/dts/imx7s.dtsi index 0fc9e6b8b05d..03d2e8544a4e 100644 --- a/arch/arm/boot/dts/imx7s.dtsi +++ b/arch/arm/boot/dts/imx7s.dtsi @@ -1270,10 +1270,10 @@ clocks = <&clks IMX7D_NAND_USDHC_BUS_RAWNAND_CLK>; }; - gpmi: nand-controller@33002000{ + gpmi: nand-controller@33002000 { compatible = "fsl,imx7d-gpmi-nand"; #address-cells = <1>; - #size-cells = <1>; + #size-cells = <0>; reg = <0x33002000 0x2000>, <0x33004000 0x4000>; reg-names = "gpmi-nand", "bch"; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/lan966x-pcb8291.dts b/arch/arm/boot/dts/lan966x-pcb8291.dts index f4f054cdf2a8..3a3d76af8612 100644 --- a/arch/arm/boot/dts/lan966x-pcb8291.dts +++ b/arch/arm/boot/dts/lan966x-pcb8291.dts @@ -69,6 +69,12 @@ pins = "GPIO_35", "GPIO_36"; function = "can0_b"; }; + + sgpio_a_pins: sgpio-a-pins { + /* SCK, D0, D1, LD */ + pins = "GPIO_32", "GPIO_33", "GPIO_34", "GPIO_35"; + function = "sgpio_a"; + }; }; &can0 { @@ -118,6 +124,20 @@ status = "okay"; }; +&sgpio { + pinctrl-0 = <&sgpio_a_pins>; + pinctrl-names = "default"; + microchip,sgpio-port-ranges = <0 3>, <8 11>; + status = "okay"; + + gpio@0 { + ngpios = <64>; + }; + gpio@1 { + ngpios = <64>; + }; +}; + &switch { status = "okay"; }; diff --git a/arch/arm/boot/dts/sama7g5-pinfunc.h b/arch/arm/boot/dts/sama7g5-pinfunc.h index 4eb30445d205..6e87f0d4b8fc 100644 --- a/arch/arm/boot/dts/sama7g5-pinfunc.h +++ b/arch/arm/boot/dts/sama7g5-pinfunc.h @@ -261,7 +261,7 @@ #define PIN_PB2__FLEXCOM6_IO0 PINMUX_PIN(PIN_PB2, 2, 1) #define PIN_PB2__ADTRG PINMUX_PIN(PIN_PB2, 3, 1) #define PIN_PB2__A20 PINMUX_PIN(PIN_PB2, 4, 1) -#define PIN_PB2__FLEXCOM11_IO0 PINMUX_PIN(PIN_PB2, 6, 3) +#define PIN_PB2__FLEXCOM11_IO1 PINMUX_PIN(PIN_PB2, 6, 3) #define PIN_PB3 35 #define PIN_PB3__GPIO PINMUX_PIN(PIN_PB3, 0, 0) #define PIN_PB3__RF1 PINMUX_PIN(PIN_PB3, 1, 1) diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index fbaa0ce46427..8f1bb78fc1e4 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -24,6 +24,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 1c9094f24893..e2f0cdacba7d 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -28,6 +28,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts index d6940e0afa86..27a3ab7e25e1 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina-tmo.dts @@ -44,6 +44,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts index 5f41256d7f4b..b88f0c07873d 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts @@ -57,6 +57,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts index 806da3fc33cd..7231bc745200 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts @@ -30,6 +30,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts index b0dce91aff4b..9604695edf53 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-golden.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-golden.dts @@ -35,6 +35,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts index ed5c79c3d04b..69387e8754a9 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts @@ -30,6 +30,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts index c57676faf181..167846df3104 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-kyle.dts @@ -34,6 +34,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts index 81b341a5ae45..93e5f5ed888d 100644 --- a/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts +++ b/arch/arm/boot/dts/ste-ux500-samsung-skomer.dts @@ -30,6 +30,14 @@ polling-delay = <0>; polling-delay-passive = <0>; thermal-sensors = <&bat_therm>; + + trips { + battery-crit-hi { + temperature = <70000>; + hysteresis = <2000>; + type = "critical"; + }; + }; }; }; diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S index ffed4d949042..e4904faf1753 100644 --- a/arch/arm/mach-at91/pm_suspend.S +++ b/arch/arm/mach-at91/pm_suspend.S @@ -169,10 +169,15 @@ sr_ena_2: cmp tmp1, #UDDRC_STAT_SELFREF_TYPE_SW bne sr_ena_2 - /* Put DDR PHY's DLL in bypass mode for non-backup modes. */ + /* Disable DX DLLs for non-backup modes. */ cmp r7, #AT91_PM_BACKUP beq sr_ena_3 + /* Do not soft reset the AC DLL. */ + ldr tmp1, [r3, DDR3PHY_ACDLLCR] + bic tmp1, tmp1, DDR3PHY_ACDLLCR_DLLSRST + str tmp1, [r3, DDR3PHY_ACDLLCR] + /* Disable DX DLLs. */ ldr tmp1, [r3, #DDR3PHY_DX0DLLCR] orr tmp1, tmp1, #DDR3PHY_DXDLLCR_DLLDIS diff --git a/arch/arm/mach-mxs/mach-mxs.c b/arch/arm/mach-mxs/mach-mxs.c index 25c9d184fa4c..1c57ac401649 100644 --- a/arch/arm/mach-mxs/mach-mxs.c +++ b/arch/arm/mach-mxs/mach-mxs.c @@ -393,8 +393,10 @@ static void __init mxs_machine_init(void) root = of_find_node_by_path("/"); ret = of_property_read_string(root, "model", &soc_dev_attr->machine); - if (ret) + if (ret) { + kfree(soc_dev_attr); return; + } soc_dev_attr->family = "Freescale MXS Family"; soc_dev_attr->soc_id = mxs_get_soc_id(); |