diff options
Diffstat (limited to 'arch')
243 files changed, 10334 insertions, 2241 deletions
diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h index 317ff773e1ca..b18fcb606908 100644 --- a/arch/arc/include/asm/hugepage.h +++ b/arch/arc/include/asm/hugepage.h @@ -11,6 +11,7 @@ #define _ASM_ARC_HUGEPAGE_H #include <linux/types.h> +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> static inline pte_t pmd_pte(pmd_t pmd) diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h index e94ca72b974e..ee22d40afef4 100644 --- a/arch/arc/include/asm/pgtable.h +++ b/arch/arc/include/asm/pgtable.h @@ -37,6 +37,7 @@ #include <asm/page.h> #include <asm/mmu.h> +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #include <linux/const.h> diff --git a/arch/arm/boot/dts/include/arm b/arch/arm/boot/dts/include/arm new file mode 120000 index 000000000000..a96aa0ea9d8c --- /dev/null +++ b/arch/arm/boot/dts/include/arm @@ -0,0 +1 @@ +..
\ No newline at end of file diff --git a/arch/arm/boot/dts/include/arm64 b/arch/arm/boot/dts/include/arm64 new file mode 120000 index 000000000000..074a835fca3e --- /dev/null +++ b/arch/arm/boot/dts/include/arm64 @@ -0,0 +1 @@ +../../../../arm64/boot/dts
\ No newline at end of file diff --git a/arch/arm/boot/dts/meson8.dtsi b/arch/arm/boot/dts/meson8.dtsi index 45619f6162c5..ebc763eab195 100644 --- a/arch/arm/boot/dts/meson8.dtsi +++ b/arch/arm/boot/dts/meson8.dtsi @@ -106,6 +106,7 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_cbus 0 0 120>; }; spi_nor_pins: nor { @@ -148,6 +149,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 120 16>; }; uart_ao_a_pins: uart_ao_a { diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi index 41fd53671859..828aa49c678c 100644 --- a/arch/arm/boot/dts/meson8b.dtsi +++ b/arch/arm/boot/dts/meson8b.dtsi @@ -198,6 +198,7 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_cbus 0 0 130>; }; }; @@ -215,6 +216,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 130 16>; }; uart_ao_a_pins: uart_ao_a { diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 27780b97c863..b36f9f423c39 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -40,16 +40,9 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include "skeleton.dtsi" - -#include <dt-bindings/clock/sun8i-h3-ccu.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/sun4i-a10.h> -#include <dt-bindings/reset/sun8i-h3-ccu.h> +#include "sunxi-h3-h5.dtsi" / { - interrupt-parent = <&gic>; - cpus { #address-cells = <1>; #size-cells = <0>; @@ -86,563 +79,48 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; +}; - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - osc24M: osc24M_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <24000000>; - clock-output-names = "osc24M"; - }; - - osc32k: osc32k_clk { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <32768>; - clock-output-names = "osc32k"; - }; - - apb0: apb0_clk { - compatible = "fixed-factor-clock"; - #clock-cells = <0>; - clock-div = <1>; - clock-mult = <1>; - clocks = <&osc24M>; - clock-output-names = "apb0"; - }; - - apb0_gates: clk@01f01428 { - compatible = "allwinner,sun8i-h3-apb0-gates-clk", - "allwinner,sun4i-a10-gates-clk"; - reg = <0x01f01428 0x4>; - #clock-cells = <1>; - clocks = <&apb0>; - clock-indices = <0>, <1>; - clock-output-names = "apb0_pio", "apb0_ir"; - }; - - ir_clk: ir_clk@01f01454 { - compatible = "allwinner,sun4i-a10-mod0-clk"; - reg = <0x01f01454 0x4>; - #clock-cells = <0>; - clocks = <&osc32k>, <&osc24M>; - clock-output-names = "ir"; - }; - }; - - soc { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges; - - dma: dma-controller@01c02000 { - compatible = "allwinner,sun8i-h3-dma"; - reg = <0x01c02000 0x1000>; - interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_DMA>; - resets = <&ccu RST_BUS_DMA>; - #dma-cells = <1>; - }; - - mmc0: mmc@01c0f000 { - compatible = "allwinner,sun7i-a20-mmc"; - reg = <0x01c0f000 0x1000>; - clocks = <&ccu CLK_BUS_MMC0>, - <&ccu CLK_MMC0>, - <&ccu CLK_MMC0_OUTPUT>, - <&ccu CLK_MMC0_SAMPLE>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ccu RST_BUS_MMC0>; - reset-names = "ahb"; - interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc1: mmc@01c10000 { - compatible = "allwinner,sun7i-a20-mmc"; - reg = <0x01c10000 0x1000>; - clocks = <&ccu CLK_BUS_MMC1>, - <&ccu CLK_MMC1>, - <&ccu CLK_MMC1_OUTPUT>, - <&ccu CLK_MMC1_SAMPLE>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ccu RST_BUS_MMC1>; - reset-names = "ahb"; - interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - mmc2: mmc@01c11000 { - compatible = "allwinner,sun7i-a20-mmc"; - reg = <0x01c11000 0x1000>; - clocks = <&ccu CLK_BUS_MMC2>, - <&ccu CLK_MMC2>, - <&ccu CLK_MMC2_OUTPUT>, - <&ccu CLK_MMC2_SAMPLE>; - clock-names = "ahb", - "mmc", - "output", - "sample"; - resets = <&ccu RST_BUS_MMC2>; - reset-names = "ahb"; - interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - usbphy: phy@01c19400 { - compatible = "allwinner,sun8i-h3-usb-phy"; - reg = <0x01c19400 0x2c>, - <0x01c1a800 0x4>, - <0x01c1b800 0x4>, - <0x01c1c800 0x4>, - <0x01c1d800 0x4>; - reg-names = "phy_ctrl", - "pmu0", - "pmu1", - "pmu2", - "pmu3"; - clocks = <&ccu CLK_USB_PHY0>, - <&ccu CLK_USB_PHY1>, - <&ccu CLK_USB_PHY2>, - <&ccu CLK_USB_PHY3>; - clock-names = "usb0_phy", - "usb1_phy", - "usb2_phy", - "usb3_phy"; - resets = <&ccu RST_USB_PHY0>, - <&ccu RST_USB_PHY1>, - <&ccu RST_USB_PHY2>, - <&ccu RST_USB_PHY3>; - reset-names = "usb0_reset", - "usb1_reset", - "usb2_reset", - "usb3_reset"; - status = "disabled"; - #phy-cells = <1>; - }; - - ehci1: usb@01c1b000 { - compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; - reg = <0x01c1b000 0x100>; - interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; - resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci1: usb@01c1b400 { - compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; - reg = <0x01c1b400 0x100>; - interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>, - <&ccu CLK_USB_OHCI1>; - resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; - phys = <&usbphy 1>; - phy-names = "usb"; - status = "disabled"; - }; - - ehci2: usb@01c1c000 { - compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; - reg = <0x01c1c000 0x100>; - interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; - resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; - phys = <&usbphy 2>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci2: usb@01c1c400 { - compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; - reg = <0x01c1c400 0x100>; - interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>, - <&ccu CLK_USB_OHCI2>; - resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; - phys = <&usbphy 2>; - phy-names = "usb"; - status = "disabled"; - }; - - ehci3: usb@01c1d000 { - compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; - reg = <0x01c1d000 0x100>; - interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; - resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; - phys = <&usbphy 3>; - phy-names = "usb"; - status = "disabled"; - }; - - ohci3: usb@01c1d400 { - compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; - reg = <0x01c1d400 0x100>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>, - <&ccu CLK_USB_OHCI3>; - resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; - phys = <&usbphy 3>; - phy-names = "usb"; - status = "disabled"; - }; - - ccu: clock@01c20000 { - compatible = "allwinner,sun8i-h3-ccu"; - reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; - clock-names = "hosc", "losc"; - #clock-cells = <1>; - #reset-cells = <1>; - }; - - pio: pinctrl@01c20800 { - compatible = "allwinner,sun8i-h3-pinctrl"; - reg = <0x01c20800 0x400>; - interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; - clock-names = "apb", "hosc", "losc"; - gpio-controller; - #gpio-cells = <3>; - interrupt-controller; - #interrupt-cells = <3>; - - i2c0_pins: i2c0 { - pins = "PA11", "PA12"; - function = "i2c0"; - }; - - i2c1_pins: i2c1 { - pins = "PA18", "PA19"; - function = "i2c1"; - }; - - i2c2_pins: i2c2 { - pins = "PE12", "PE13"; - function = "i2c2"; - }; - - mmc0_pins_a: mmc0@0 { - pins = "PF0", "PF1", "PF2", "PF3", - "PF4", "PF5"; - function = "mmc0"; - drive-strength = <30>; - bias-pull-up; - }; - - mmc0_cd_pin: mmc0_cd_pin@0 { - pins = "PF6"; - function = "gpio_in"; - bias-pull-up; - }; - - mmc1_pins_a: mmc1@0 { - pins = "PG0", "PG1", "PG2", "PG3", - "PG4", "PG5"; - function = "mmc1"; - drive-strength = <30>; - bias-pull-up; - }; - - mmc2_8bit_pins: mmc2_8bit { - pins = "PC5", "PC6", "PC8", - "PC9", "PC10", "PC11", - "PC12", "PC13", "PC14", - "PC15", "PC16"; - function = "mmc2"; - drive-strength = <30>; - bias-pull-up; - }; - - spdif_tx_pins_a: spdif@0 { - pins = "PA17"; - function = "spdif"; - }; - - spi0_pins: spi0 { - pins = "PC0", "PC1", "PC2", "PC3"; - function = "spi0"; - }; - - spi1_pins: spi1 { - pins = "PA15", "PA16", "PA14", "PA13"; - function = "spi1"; - }; - - uart0_pins_a: uart0@0 { - pins = "PA4", "PA5"; - function = "uart0"; - }; - - uart1_pins: uart1 { - pins = "PG6", "PG7"; - function = "uart1"; - }; - - uart1_rts_cts_pins: uart1_rts_cts { - pins = "PG8", "PG9"; - function = "uart1"; - }; - - uart2_pins: uart2 { - pins = "PA0", "PA1"; - function = "uart2"; - }; - - uart3_pins: uart3 { - pins = "PA13", "PA14"; - function = "uart3"; - }; - }; - - timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; - reg = <0x01c20c00 0xa0>; - interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&osc24M>; - }; - - spi0: spi@01c68000 { - compatible = "allwinner,sun8i-h3-spi"; - reg = <0x01c68000 0x1000>; - interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; - clock-names = "ahb", "mod"; - dmas = <&dma 23>, <&dma 23>; - dma-names = "rx", "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi0_pins>; - resets = <&ccu RST_BUS_SPI0>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - spi1: spi@01c69000 { - compatible = "allwinner,sun8i-h3-spi"; - reg = <0x01c69000 0x1000>; - interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; - clock-names = "ahb", "mod"; - dmas = <&dma 24>, <&dma 24>; - dma-names = "rx", "tx"; - pinctrl-names = "default"; - pinctrl-0 = <&spi1_pins>; - resets = <&ccu RST_BUS_SPI1>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - wdt0: watchdog@01c20ca0 { - compatible = "allwinner,sun6i-a31-wdt"; - reg = <0x01c20ca0 0x20>; - interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; - }; - - spdif: spdif@01c21000 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun8i-h3-spdif"; - reg = <0x01c21000 0x400>; - interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; - resets = <&ccu RST_BUS_SPDIF>; - clock-names = "apb", "spdif"; - dmas = <&dma 2>; - dma-names = "tx"; - status = "disabled"; - }; - - pwm: pwm@01c21400 { - compatible = "allwinner,sun8i-h3-pwm"; - reg = <0x01c21400 0x8>; - clocks = <&osc24M>; - #pwm-cells = <3>; - status = "disabled"; - }; - - codec: codec@01c22c00 { - #sound-dai-cells = <0>; - compatible = "allwinner,sun8i-h3-codec"; - reg = <0x01c22c00 0x400>; - interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; - clock-names = "apb", "codec"; - resets = <&ccu RST_BUS_CODEC>; - dmas = <&dma 15>, <&dma 15>; - dma-names = "rx", "tx"; - allwinner,codec-analog-controls = <&codec_analog>; - status = "disabled"; - }; - - uart0: serial@01c28000 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28000 0x400>; - interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART0>; - resets = <&ccu RST_BUS_UART0>; - dmas = <&dma 6>, <&dma 6>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart1: serial@01c28400 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28400 0x400>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART1>; - resets = <&ccu RST_BUS_UART1>; - dmas = <&dma 7>, <&dma 7>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart2: serial@01c28800 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28800 0x400>; - interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART2>; - resets = <&ccu RST_BUS_UART2>; - dmas = <&dma 8>, <&dma 8>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - uart3: serial@01c28c00 { - compatible = "snps,dw-apb-uart"; - reg = <0x01c28c00 0x400>; - interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; - reg-shift = <2>; - reg-io-width = <4>; - clocks = <&ccu CLK_BUS_UART3>; - resets = <&ccu RST_BUS_UART3>; - dmas = <&dma 9>, <&dma 9>; - dma-names = "rx", "tx"; - status = "disabled"; - }; - - i2c0: i2c@01c2ac00 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2ac00 0x400>; - interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_I2C0>; - resets = <&ccu RST_BUS_I2C0>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c1: i2c@01c2b000 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_I2C1>; - resets = <&ccu RST_BUS_I2C1>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - i2c2: i2c@01c2b400 { - compatible = "allwinner,sun6i-a31-i2c"; - reg = <0x01c2b000 0x400>; - interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_I2C2>; - resets = <&ccu RST_BUS_I2C2>; - pinctrl-names = "default"; - pinctrl-0 = <&i2c2_pins>; - status = "disabled"; - #address-cells = <1>; - #size-cells = <0>; - }; - - gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; - reg = <0x01c81000 0x1000>, - <0x01c82000 0x2000>, - <0x01c84000 0x2000>, - <0x01c86000 0x2000>; - interrupt-controller; - #interrupt-cells = <3>; - interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; - }; - - rtc: rtc@01f00000 { - compatible = "allwinner,sun6i-a31-rtc"; - reg = <0x01f00000 0x54>; - interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; - }; - - apb0_reset: reset@01f014b0 { - reg = <0x01f014b0 0x4>; - compatible = "allwinner,sun6i-a31-clock-reset"; - #reset-cells = <1>; - }; +&ccu { + compatible = "allwinner,sun8i-h3-ccu"; +}; - codec_analog: codec-analog@01f015c0 { - compatible = "allwinner,sun8i-h3-codec-analog"; - reg = <0x01f015c0 0x4>; - }; +&mmc0 { + compatible = "allwinner,sun7i-a20-mmc"; + clocks = <&ccu CLK_BUS_MMC0>, + <&ccu CLK_MMC0>, + <&ccu CLK_MMC0_OUTPUT>, + <&ccu CLK_MMC0_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; +}; - ir: ir@01f02000 { - compatible = "allwinner,sun5i-a13-ir"; - clocks = <&apb0_gates 1>, <&ir_clk>; - clock-names = "apb", "ir"; - resets = <&apb0_reset 1>; - interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; - reg = <0x01f02000 0x40>; - status = "disabled"; - }; +&mmc1 { + compatible = "allwinner,sun7i-a20-mmc"; + clocks = <&ccu CLK_BUS_MMC1>, + <&ccu CLK_MMC1>, + <&ccu CLK_MMC1_OUTPUT>, + <&ccu CLK_MMC1_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; +}; - r_pio: pinctrl@01f02c00 { - compatible = "allwinner,sun8i-h3-r-pinctrl"; - reg = <0x01f02c00 0x400>; - interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&apb0_gates 0>, <&osc24M>, <&osc32k>; - clock-names = "apb", "hosc", "losc"; - resets = <&apb0_reset 0>; - gpio-controller; - #gpio-cells = <3>; - interrupt-controller; - #interrupt-cells = <3>; +&mmc2 { + compatible = "allwinner,sun7i-a20-mmc"; + clocks = <&ccu CLK_BUS_MMC2>, + <&ccu CLK_MMC2>, + <&ccu CLK_MMC2_OUTPUT>, + <&ccu CLK_MMC2_SAMPLE>; + clock-names = "ahb", + "mmc", + "output", + "sample"; +}; - ir_pins_a: ir@0 { - pins = "PL11"; - function = "s_cir_rx"; - }; - }; - }; +&pio { + compatible = "allwinner,sun8i-h3-pinctrl"; }; diff --git a/arch/arm/boot/dts/sunxi-h3-h5.dtsi b/arch/arm/boot/dts/sunxi-h3-h5.dtsi new file mode 100644 index 000000000000..1aeeacb3a884 --- /dev/null +++ b/arch/arm/boot/dts/sunxi-h3-h5.dtsi @@ -0,0 +1,601 @@ +/* + * Copyright (C) 2015 Jens Kuske <jenskuske@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/sun8i-h3-ccu.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/sun8i-h3-ccu.h> + +/ { + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + iosc: internal-osc-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-accuracy = <300000000>; + clock-output-names = "iosc"; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + dma: dma-controller@01c02000 { + compatible = "allwinner,sun8i-h3-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_DMA>; + resets = <&ccu RST_BUS_DMA>; + #dma-cells = <1>; + }; + + mmc0: mmc@01c0f000 { + /* compatible and clocks are in per SoC .dtsi file */ + reg = <0x01c0f000 0x1000>; + resets = <&ccu RST_BUS_MMC0>; + reset-names = "ahb"; + interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc1: mmc@01c10000 { + /* compatible and clocks are in per SoC .dtsi file */ + reg = <0x01c10000 0x1000>; + resets = <&ccu RST_BUS_MMC1>; + reset-names = "ahb"; + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + mmc2: mmc@01c11000 { + /* compatible and clocks are in per SoC .dtsi file */ + reg = <0x01c11000 0x1000>; + resets = <&ccu RST_BUS_MMC2>; + reset-names = "ahb"; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + usb_otg: usb@01c19000 { + compatible = "allwinner,sun8i-h3-musb"; + reg = <0x01c19000 0x400>; + clocks = <&ccu CLK_BUS_OTG>; + resets = <&ccu RST_BUS_OTG>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "mc"; + phys = <&usbphy 0>; + phy-names = "usb"; + extcon = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: phy@01c19400 { + compatible = "allwinner,sun8i-h3-usb-phy"; + reg = <0x01c19400 0x2c>, + <0x01c1a800 0x4>, + <0x01c1b800 0x4>, + <0x01c1c800 0x4>, + <0x01c1d800 0x4>; + reg-names = "phy_ctrl", + "pmu0", + "pmu1", + "pmu2", + "pmu3"; + clocks = <&ccu CLK_USB_PHY0>, + <&ccu CLK_USB_PHY1>, + <&ccu CLK_USB_PHY2>, + <&ccu CLK_USB_PHY3>; + clock-names = "usb0_phy", + "usb1_phy", + "usb2_phy", + "usb3_phy"; + resets = <&ccu RST_USB_PHY0>, + <&ccu RST_USB_PHY1>, + <&ccu RST_USB_PHY2>, + <&ccu RST_USB_PHY3>; + reset-names = "usb0_reset", + "usb1_reset", + "usb2_reset", + "usb3_reset"; + status = "disabled"; + #phy-cells = <1>; + }; + + ehci0: usb@01c1a000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1a000 0x100>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>; + resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; + status = "disabled"; + }; + + ohci0: usb@01c1a400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1a400 0x100>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI0>, <&ccu CLK_BUS_OHCI0>, + <&ccu CLK_USB_OHCI0>; + resets = <&ccu RST_BUS_EHCI0>, <&ccu RST_BUS_OHCI0>; + status = "disabled"; + }; + + ehci1: usb@01c1b000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1b000 0x100>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci1: usb@01c1b400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1b400 0x100>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI1>, <&ccu CLK_BUS_OHCI1>, + <&ccu CLK_USB_OHCI1>; + resets = <&ccu RST_BUS_EHCI1>, <&ccu RST_BUS_OHCI1>; + phys = <&usbphy 1>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci2: usb@01c1c000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1c000 0x100>; + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci2: usb@01c1c400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1c400 0x100>; + interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI2>, <&ccu CLK_BUS_OHCI2>, + <&ccu CLK_USB_OHCI2>; + resets = <&ccu RST_BUS_EHCI2>, <&ccu RST_BUS_OHCI2>; + phys = <&usbphy 2>; + phy-names = "usb"; + status = "disabled"; + }; + + ehci3: usb@01c1d000 { + compatible = "allwinner,sun8i-h3-ehci", "generic-ehci"; + reg = <0x01c1d000 0x100>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; + phys = <&usbphy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + ohci3: usb@01c1d400 { + compatible = "allwinner,sun8i-h3-ohci", "generic-ohci"; + reg = <0x01c1d400 0x100>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_EHCI3>, <&ccu CLK_BUS_OHCI3>, + <&ccu CLK_USB_OHCI3>; + resets = <&ccu RST_BUS_EHCI3>, <&ccu RST_BUS_OHCI3>; + phys = <&usbphy 3>; + phy-names = "usb"; + status = "disabled"; + }; + + ccu: clock@01c20000 { + /* compatible is in per SoC .dtsi file */ + reg = <0x01c20000 0x400>; + clocks = <&osc24M>, <&osc32k>; + clock-names = "hosc", "losc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pio: pinctrl@01c20800 { + /* compatible is in per SoC .dtsi file */ + reg = <0x01c20800 0x400>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + i2c0_pins: i2c0 { + pins = "PA11", "PA12"; + function = "i2c0"; + }; + + i2c1_pins: i2c1 { + pins = "PA18", "PA19"; + function = "i2c1"; + }; + + i2c2_pins: i2c2 { + pins = "PE12", "PE13"; + function = "i2c2"; + }; + + mmc0_pins_a: mmc0@0 { + pins = "PF0", "PF1", "PF2", "PF3", + "PF4", "PF5"; + function = "mmc0"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc0_cd_pin: mmc0_cd_pin@0 { + pins = "PF6"; + function = "gpio_in"; + bias-pull-up; + }; + + mmc1_pins_a: mmc1@0 { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + mmc2_8bit_pins: mmc2_8bit { + pins = "PC5", "PC6", "PC8", + "PC9", "PC10", "PC11", + "PC12", "PC13", "PC14", + "PC15", "PC16"; + function = "mmc2"; + drive-strength = <30>; + bias-pull-up; + }; + + spdif_tx_pins_a: spdif@0 { + pins = "PA17"; + function = "spdif"; + }; + + spi0_pins: spi0 { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; + + spi1_pins: spi1 { + pins = "PA15", "PA16", "PA14", "PA13"; + function = "spi1"; + }; + + uart0_pins_a: uart0@0 { + pins = "PA4", "PA5"; + function = "uart0"; + }; + + uart1_pins: uart1 { + pins = "PG6", "PG7"; + function = "uart1"; + }; + + uart1_rts_cts_pins: uart1_rts_cts { + pins = "PG8", "PG9"; + function = "uart1"; + }; + + uart2_pins: uart2 { + pins = "PA0", "PA1"; + function = "uart2"; + }; + + uart3_pins: uart3 { + pins = "PA13", "PA14"; + function = "uart3"; + }; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; + }; + + spi0: spi@01c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + dmas = <&dma 23>, <&dma 23>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@01c69000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c69000 0x1000>; + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI1>, <&ccu CLK_SPI1>; + clock-names = "ahb", "mod"; + dmas = <&dma 24>, <&dma 24>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins>; + resets = <&ccu RST_BUS_SPI1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + }; + + spdif: spdif@01c21000 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-spdif"; + reg = <0x01c21000 0x400>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPDIF>, <&ccu CLK_SPDIF>; + resets = <&ccu RST_BUS_SPDIF>; + clock-names = "apb", "spdif"; + dmas = <&dma 2>; + dma-names = "tx"; + status = "disabled"; + }; + + pwm: pwm@01c21400 { + compatible = "allwinner,sun8i-h3-pwm"; + reg = <0x01c21400 0x8>; + clocks = <&osc24M>; + #pwm-cells = <3>; + status = "disabled"; + }; + + codec: codec@01c22c00 { + #sound-dai-cells = <0>; + compatible = "allwinner,sun8i-h3-codec"; + reg = <0x01c22c00 0x400>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CODEC>, <&ccu CLK_AC_DIG>; + clock-names = "apb", "codec"; + resets = <&ccu RST_BUS_CODEC>; + dmas = <&dma 15>, <&dma 15>; + dma-names = "rx", "tx"; + allwinner,codec-analog-controls = <&codec_analog>; + status = "disabled"; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART0>; + resets = <&ccu RST_BUS_UART0>; + dmas = <&dma 6>, <&dma 6>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART1>; + resets = <&ccu RST_BUS_UART1>; + dmas = <&dma 7>, <&dma 7>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART2>; + resets = <&ccu RST_BUS_UART2>; + dmas = <&dma 8>, <&dma 8>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&ccu CLK_BUS_UART3>; + resets = <&ccu RST_BUS_UART3>; + dmas = <&dma 9>, <&dma 9>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c0: i2c@01c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@01c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c2: i2c@01c2b400 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C2>; + resets = <&ccu RST_BUS_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,gic-400"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x2000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + rtc: rtc@01f00000 { + compatible = "allwinner,sun6i-a31-rtc"; + reg = <0x01f00000 0x54>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + }; + + r_ccu: clock@1f01400 { + compatible = "allwinner,sun50i-a64-r-ccu"; + reg = <0x01f01400 0x100>; + clocks = <&osc24M>, <&osc32k>, <&iosc>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + codec_analog: codec-analog@01f015c0 { + compatible = "allwinner,sun8i-h3-codec-analog"; + reg = <0x01f015c0 0x4>; + }; + + ir: ir@01f02000 { + compatible = "allwinner,sun5i-a13-ir"; + clocks = <&r_ccu 4>, <&r_ccu 11>; + clock-names = "apb", "ir"; + resets = <&r_ccu 0>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + reg = <0x01f02000 0x40>; + status = "disabled"; + }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun8i-h3-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + + ir_pins_a: ir@0 { + pins = "PL11"; + function = "s_cir_rx"; + }; + }; + }; +}; diff --git a/arch/arm/include/asm/kvm_arm.h b/arch/arm/include/asm/kvm_arm.h index e22089fb44dc..a3f0b3d50089 100644 --- a/arch/arm/include/asm/kvm_arm.h +++ b/arch/arm/include/asm/kvm_arm.h @@ -209,6 +209,7 @@ #define HSR_EC_IABT_HYP (0x21) #define HSR_EC_DABT (0x24) #define HSR_EC_DABT_HYP (0x25) +#define HSR_EC_MAX (0x3f) #define HSR_WFI_IS_WFE (_AC(1, UL) << 0) diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index cc495d799c67..31ee468ce667 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -30,7 +30,6 @@ #define __KVM_HAVE_ARCH_INTC_INITIALIZED #define KVM_USER_MEM_SLOTS 32 -#define KVM_PRIVATE_MEM_SLOTS 4 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 #define KVM_HAVE_ONE_REG #define KVM_HALT_POLL_NS_DEFAULT 500000 diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index a8d656d9aec7..1c462381c225 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -20,6 +20,7 @@ #else +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopud.h> #include <asm/memory.h> #include <asm/pgtable-hwdef.h> diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index c9a2103faeb9..96dba7cd8be7 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -221,6 +221,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) case KVM_CAP_MAX_VCPUS: r = KVM_MAX_VCPUS; break; + case KVM_CAP_NR_MEMSLOTS: + r = KVM_USER_MEM_SLOTS; + break; case KVM_CAP_MSI_DEVID: if (!kvm) r = -EINVAL; diff --git a/arch/arm/kvm/handle_exit.c b/arch/arm/kvm/handle_exit.c index 4e40d1955e35..96af65a30d78 100644 --- a/arch/arm/kvm/handle_exit.c +++ b/arch/arm/kvm/handle_exit.c @@ -79,7 +79,19 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run) return 1; } +static int kvm_handle_unknown_ec(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + u32 hsr = kvm_vcpu_get_hsr(vcpu); + + kvm_pr_unimpl("Unknown exception class: hsr: %#08x\n", + hsr); + + kvm_inject_undefined(vcpu); + return 1; +} + static exit_handle_fn arm_exit_handlers[] = { + [0 ... HSR_EC_MAX] = kvm_handle_unknown_ec, [HSR_EC_WFI] = kvm_handle_wfx, [HSR_EC_CP15_32] = kvm_handle_cp15_32, [HSR_EC_CP15_64] = kvm_handle_cp15_64, @@ -98,13 +110,6 @@ static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu) { u8 hsr_ec = kvm_vcpu_trap_get_class(vcpu); - if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers) || - !arm_exit_handlers[hsr_ec]) { - kvm_err("Unknown exception class: hsr: %#08x\n", - (unsigned int)kvm_vcpu_get_hsr(vcpu)); - BUG(); - } - return arm_exit_handlers[hsr_ec]; } diff --git a/arch/arm/xen/mm.c b/arch/arm/xen/mm.c index ce18c91b50a1..f0325d96b97a 100644 --- a/arch/arm/xen/mm.c +++ b/arch/arm/xen/mm.c @@ -198,6 +198,8 @@ static const struct dma_map_ops xen_swiotlb_dma_ops = { .unmap_page = xen_swiotlb_unmap_page, .dma_supported = xen_swiotlb_dma_supported, .set_dma_mask = xen_swiotlb_set_dma_mask, + .mmap = xen_swiotlb_dma_mmap, + .get_sgtable = xen_swiotlb_get_sgtable, }; int __init xen_mm_init(void) diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig index a39029b5414e..8c7c244247b6 100644 --- a/arch/arm64/Kconfig +++ b/arch/arm64/Kconfig @@ -508,6 +508,16 @@ config QCOM_FALKOR_ERRATUM_1009 If unsure, say Y. +config QCOM_QDF2400_ERRATUM_0065 + bool "QDF2400 E0065: Incorrect GITS_TYPER.ITT_Entry_size" + default y + help + On Qualcomm Datacenter Technologies QDF2400 SoC, ITS hardware reports + ITE size incorrectly. The GITS_TYPER.ITT_Entry_size field should have + been indicated as 16Bytes (0xf), not 8Bytes (0x7). + + If unsure, say Y. + endmenu diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index bc6f342be59f..244e8b7565f9 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -1,5 +1,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-orangepi-pc2.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi index 1c64ea2d23f9..6bc606b4d74d 100644 --- a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi @@ -98,6 +98,14 @@ clock-output-names = "osc32k"; }; + iosc: internal-osc-clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <16000000>; + clock-accuracy = <300000000>; + clock-output-names = "iosc"; + }; + psci { compatible = "arm,psci-0.2"; method = "smc"; @@ -392,5 +400,26 @@ interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; }; + + r_ccu: clock@1f01400 { + compatible = "allwinner,sun50i-a64-r-ccu"; + reg = <0x01f01400 0x100>; + clocks = <&osc24M>, <&osc32k>, <&iosc>; + clock-names = "hosc", "losc", "iosc"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + r_pio: pinctrl@01f02c00 { + compatible = "allwinner,sun50i-a64-r-pinctrl"; + reg = <0x01f02c00 0x400>; + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&r_ccu 3>, <&osc24M>, <&osc32k>; + clock-names = "apb", "hosc", "losc"; + gpio-controller; + #gpio-cells = <3>; + interrupt-controller; + #interrupt-cells = <3>; + }; }; }; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts new file mode 100644 index 000000000000..dfecc17dcc92 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-pc2.dts @@ -0,0 +1,188 @@ +/* + * Copyright (C) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "sun50i-h5.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/sun4i-a10.h> + +/ { + model = "Xunlong Orange Pi PC 2"; + compatible = "xunlong,orangepi-pc2", "allwinner,sun50i-h5"; + + reg_vcc3v3: vcc3v3 { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + leds { + compatible = "gpio-leds"; + + pwr { + label = "orangepi:green:pwr"; + gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + status { + label = "orangepi:red:status"; + gpios = <&pio 0 20 GPIO_ACTIVE_HIGH>; + }; + }; + + r-gpio-keys { + compatible = "gpio-keys"; + + sw4 { + label = "sw4"; + linux,code = <BTN_0>; + gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>; + }; + }; + + reg_usb0_vbus: usb0-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */ + status = "okay"; + }; +}; + +&codec { + allwinner,audio-routing = + "Line Out", "LINEOUT", + "MIC1", "Mic", + "Mic", "MBIAS"; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&ehci2 { + status = "okay"; +}; + +&ehci3 { + status = "okay"; +}; + +&ir { + pinctrl-names = "default"; + pinctrl-0 = <&ir_pins_a>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&ohci2 { + status = "okay"; +}; + +&ohci3 { + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "disabled"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; + status = "disabled"; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + /* USB Type-A ports' VBUS is always on */ + usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */ + usb0_vbus-supply = <®_usb0_vbus>; + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi new file mode 100644 index 000000000000..4d314a253fd9 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi @@ -0,0 +1,124 @@ +/* + * Copyright (C) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "sunxi-h3-h5.dtsi" + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <0>; + enable-method = "psci"; + }; + + cpu@1 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <1>; + enable-method = "psci"; + }; + + cpu@2 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <2>; + enable-method = "psci"; + }; + + cpu@3 { + compatible = "arm,cortex-a53", "arm,armv8"; + device_type = "cpu"; + reg = <3>; + enable-method = "psci"; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; +}; + +&ccu { + compatible = "allwinner,sun50i-h5-ccu"; +}; + +&mmc0 { + compatible = "allwinner,sun50i-h5-mmc", + "allwinner,sun50i-a64-mmc"; + clocks = <&ccu CLK_BUS_MMC0>, <&ccu CLK_MMC0>; + clock-names = "ahb", "mmc"; +}; + +&mmc1 { + compatible = "allwinner,sun50i-h5-mmc", + "allwinner,sun50i-a64-mmc"; + clocks = <&ccu CLK_BUS_MMC1>, <&ccu CLK_MMC1>; + clock-names = "ahb", "mmc"; +}; + +&mmc2 { + compatible = "allwinner,sun50i-h5-emmc", + "allwinner,sun50i-a64-emmc"; + clocks = <&ccu CLK_BUS_MMC2>, <&ccu CLK_MMC2>; + clock-names = "ahb", "mmc"; +}; + +&pio { + compatible = "allwinner,sun50i-h5-pinctrl"; +}; diff --git a/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi b/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi new file mode 120000 index 000000000000..036f01dc2b9b --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sunxi-h3-h5.dtsi @@ -0,0 +1 @@ +../../../../arm/boot/dts/sunxi-h3-h5.dtsi
\ No newline at end of file diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile index 3f94bce33b7f..b9ad2db7398b 100644 --- a/arch/arm64/boot/dts/amlogic/Makefile +++ b/arch/arm64/boot/dts/amlogic/Makefile @@ -7,9 +7,11 @@ dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-meta.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-vega-s95-telos.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-hub.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxbb-wetek-play2.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-khadas-vim.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-p212.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p230.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905d-p231.dtb +dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-hwacom-amazetv.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxl-s905x-nexbox-a95x.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q200.dtb dtb-$(CONFIG_ARCH_MESON) += meson-gxm-q201.dtb diff --git a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi index 7a078bef04cd..a84e27622639 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx-p23x-q20x.dtsi @@ -98,6 +98,27 @@ clocks = <&wifi32k>; clock-names = "ext_clock"; }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -188,3 +209,21 @@ ðmac { status = "okay"; }; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 5d995f7724af..358eef97ec95 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -71,6 +71,14 @@ reg = <0x0 0x10000000 0x0 0x200000>; no-map; }; + + linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0x0 0xbc00000>; + alignment = <0x0 0x400000>; + linux,cma-default; + }; }; cpus { @@ -233,7 +241,7 @@ }; i2c_A: i2c@8500 { - compatible = "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; reg = <0x0 0x08500 0x0 0x20>; interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -279,7 +287,7 @@ }; i2c_B: i2c@87c0 { - compatible = "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087c0 0x0 0x20>; interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -288,7 +296,7 @@ }; i2c_C: i2c@87e0 { - compatible = "amlogic,meson-gxbb-i2c"; + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; reg = <0x0 0x087e0 0x0 0x20>; interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>; #address-cells = <1>; @@ -296,6 +304,14 @@ status = "disabled"; }; + spifc: spi@8c80 { + compatible = "amlogic,meson-gx-spifc", "amlogic,meson-gxbb-spifc"; + reg = <0x0 0x08c80 0x0 0x80>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + watchdog@98d0 { compatible = "amlogic,meson-gx-wdt", "amlogic,meson-gxbb-wdt"; reg = <0x0 0x098d0 0x0 0x10>; @@ -317,7 +333,7 @@ }; sram: sram@c8000000 { - compatible = "amlogic,meson-gxbb-sram", "mmio-sram"; + compatible = "amlogic,meson-gx-sram", "amlogic,meson-gxbb-sram", "mmio-sram"; reg = <0x0 0xc8000000 0x0 0x14000>; #address-cells = <1>; @@ -325,12 +341,12 @@ ranges = <0 0x0 0xc8000000 0x14000>; cpu_scp_lpri: scp-shmem@0 { - compatible = "amlogic,meson-gxbb-scp-shmem"; + compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem"; reg = <0x13000 0x400>; }; cpu_scp_hpri: scp-shmem@200 { - compatible = "amlogic,meson-gxbb-scp-shmem"; + compatible = "amlogic,meson-gx-scp-shmem", "amlogic,meson-gxbb-scp-shmem"; reg = <0x13400 0x400>; }; }; @@ -342,6 +358,13 @@ #size-cells = <2>; ranges = <0x0 0x0 0x0 0xc8100000 0x0 0x100000>; + clkc_AO: clock-controller@040 { + compatible = "amlogic,gx-aoclkc", "amlogic,gxbb-aoclkc"; + reg = <0x0 0x00040 0x0 0x4>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + uart_AO: serial@4c0 { compatible = "amlogic,meson-uart"; reg = <0x0 0x004c0 0x0 0x14>; @@ -358,6 +381,15 @@ status = "disabled"; }; + i2c_AO: i2c@500 { + compatible = "amlogic,meson-gx-i2c", "amlogic,meson-gxbb-i2c"; + reg = <0x0 0x500 0x0 0x20>; + interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + pwm_AO_ab: pwm@550 { compatible = "amlogic,meson-gx-pwm", "amlogic,meson-gxbb-pwm"; reg = <0x0 0x00550 0x0 0x10>; @@ -366,7 +398,7 @@ }; ir: ir@580 { - compatible = "amlogic,meson-gxbb-ir"; + compatible = "amlogic,meson-gx-ir", "amlogic,meson-gxbb-ir"; reg = <0x0 0x00580 0x0 0x40>; interrupts = <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>; status = "disabled"; @@ -386,7 +418,6 @@ }; }; - hiubus: hiubus@c883c000 { compatible = "simple-bus"; reg = <0x0 0xc883c000 0x0 0x2000>; @@ -410,7 +441,6 @@ 0x0 0xc8834540 0x0 0x4>; interrupts = <0 8 1>; interrupt-names = "macirq"; - phy-mode = "rgmii"; status = "disabled"; }; @@ -457,6 +487,38 @@ cvbs_vdac_port: port@0 { reg = <0>; }; + + /* HDMI-TX output port */ + hdmi_tx_port: port@1 { + reg = <1>; + + hdmi_tx_out: endpoint { + remote-endpoint = <&hdmi_tx_in>; + }; + }; + }; + + hdmi_tx: hdmi-tx@c883a000 { + compatible = "amlogic,meson-gx-dw-hdmi"; + reg = <0x0 0xc883a000 0x0 0x1c>; + interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + /* VPU VENC Input */ + hdmi_tx_venc_port: port@0 { + reg = <0>; + + hdmi_tx_in: endpoint { + remote-endpoint = <&hdmi_tx_out>; + }; + }; + + /* TMDS Output */ + hdmi_tx_tmds_port: port@1 { + reg = <1>; + }; }; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts index 4cbd626a9e88..87198eafb04b 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-nexbox-a95x.dts @@ -152,6 +152,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; &uart_AO { @@ -164,7 +175,24 @@ status = "okay"; pinctrl-0 = <ð_rmii_pins>; pinctrl-names = "default"; + + phy-handle = <ð_phy0>; phy-mode = "rmii"; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* IC Plus IP101GR (0x02430c54) */ + reg = <0>; + }; + }; }; &ir { @@ -245,3 +273,15 @@ remote-endpoint = <&cvbs_connector_in>; }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts index c59403adb387..54a9c6a6b392 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts @@ -96,7 +96,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; - gpio = <&gpio_ao GPIOAO_12 GPIO_ACTIVE_HIGH>; + gpio = <&gpio GPIOY_12 GPIO_ACTIVE_HIGH>; enable-active-high; }; @@ -152,6 +152,13 @@ pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + amlogic,tx-delay-ns = <2>; mdio { compatible = "snps,dwmac-mdio"; @@ -165,6 +172,57 @@ }; }; +&pinctrl_aobus { + gpio-line-names = "UART TX", "UART RX", "VCCK En", "TF 3V3/1V8 En", + "USB HUB nRESET", "USB OTG Power En", + "J7 Header Pin2", "IR In", "J7 Header Pin4", + "J7 Header Pin6", "J7 Header Pin5", "J7 Header Pin7", + "HDMI CEC", "SYS LED"; +}; + +&pinctrl_periphs { + gpio-line-names = /* Bank GPIOZ */ + "Eth MDIO", "Eth MDC", "Eth RGMII RX Clk", + "Eth RX DV", "Eth RX D0", "Eth RX D1", "Eth RX D2", + "Eth RX D3", "Eth RGMII TX Clk", "Eth TX En", + "Eth TX D0", "Eth TX D1", "Eth TX D2", "Eth TX D3", + "Eth PHY nRESET", "Eth PHY Intc", + /* Bank GPIOH */ + "HDMI HPD", "HDMI DDC SDA", "HDMI DDC SCL", "", + /* Bank BOOT */ + "eMMC D0", "eMMC D1", "eMMC D2", "eMMC D3", "eMMC D4", + "eMMC D5", "eMMC D6", "eMMC D7", "eMMC Clk", + "eMMC Reset", "eMMC CMD", + "", "", "", "", "", "", "", + /* Bank CARD */ + "SDCard D1", "SDCard D0", "SDCard CLK", "SDCard CMD", + "SDCard D3", "SDCard D2", "SDCard Det", + /* Bank GPIODV */ + "", "", "", "", "", "", "", "", "", "", "", "", "", + "", "", "", "", "", "", "", "", "", "", "", + "I2C A SDA", "I2C A SCK", "I2C B SDA", "I2C B SCK", + "PWM D", "PWM B", + /* Bank GPIOY */ + "Revision Bit0", "Revision Bit1", "", + "J2 Header Pin35", "", "", "", "J2 Header Pin36", + "J2 Header Pin31", "", "", "", "TF VDD En", + "J2 Header Pin32", "J2 Header Pin26", "", "", + /* Bank GPIOX */ + "J2 Header Pin29", "J2 Header Pin24", + "J2 Header Pin23", "J2 Header Pin22", + "J2 Header Pin21", "J2 Header Pin18", + "J2 Header Pin33", "J2 Header Pin19", + "J2 Header Pin16", "J2 Header Pin15", + "J2 Header Pin12", "J2 Header Pin13", + "J2 Header Pin8", "J2 Header Pin10", + "", "", "", "", "", + "J2 Header Pin11", "", "J2 Header Pin7", + /* Bank GPIOCLK */ + "", "", "", "", + /* GPIO_TEST_N */ + ""; +}; + &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; @@ -177,6 +235,21 @@ pinctrl-names = "default"; }; +&gpio_ao { + /* + * WARNING: The USB Hub on the Odroid-C2 needs a reset signal + * to be turned high in order to be detected by the USB Controller + * This signal should be handled by a USB specific power sequence + * in order to reset the Hub when USB bus is powered down. + */ + usb-hub { + gpio-hog; + gpios = <GPIOAO_4 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "usb-hub-reset"; + }; +}; + &usb0_phy { status = "okay"; phy-supply = <&usb_otg_pwr>; @@ -194,6 +267,11 @@ status = "okay"; }; +&saradc { + status = "okay"; + vref-supply = <&vcc1v8>; +}; + /* SD */ &sd_emmc_b { status = "okay"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts index fc0e86cb4cde..2054a474e0a9 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p200.dts @@ -96,6 +96,31 @@ }; }; +ðmac { + status = "okay"; + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + amlogic,tx-delay-ns = <2>; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@3 { + /* Micrel KSZ9031 (0x00221620) */ + reg = <3>; + }; + }; +}; + &i2c_B { status = "okay"; pinctrl-0 = <&i2c_b_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts index 39bb037a3e47..ae3194663d64 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p201.dts @@ -50,3 +50,14 @@ compatible = "amlogic,p201", "amlogic,meson-gxbb"; model = "Amlogic Meson GXBB P201 Development Board"; }; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rmii_pins>; + pinctrl-names = "default"; + phy-mode = "rmii"; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi index 4a96e0f6f926..3c6c0b7f4187 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-p20x.dtsi @@ -135,6 +135,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -144,12 +155,6 @@ pinctrl-names = "default"; }; -ðmac { - status = "okay"; - pinctrl-0 = <ð_rgmii_pins>; - pinctrl-names = "default"; -}; - &ir { status = "okay"; pinctrl-0 = <&remote_input_ao_pins>; @@ -250,3 +255,15 @@ remote-endpoint = <&cvbs_connector_in>; }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi index 86709929fd20..aefa66dff72d 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-vega-s95.dtsi @@ -115,7 +115,6 @@ status = "okay"; pinctrl-0 = <&uart_ao_a_pins>; pinctrl-names = "default"; - }; &ir { @@ -128,6 +127,26 @@ status = "okay"; pinctrl-0 = <ð_rgmii_pins>; pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + amlogic,tx-delay-ns = <2>; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + }; + }; }; &usb0_phy { diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts index 56f855901262..f057fb48fee5 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-hub.dts @@ -64,3 +64,29 @@ status = "disabled"; }; }; + +ðmac { + status = "okay"; + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + amlogic,tx-delay-ns = <2>; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts index ea79fdd2c248..743acb5f5d06 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek-play2.dts @@ -87,6 +87,32 @@ }; }; +ðmac { + status = "okay"; + pinctrl-0 = <ð_rgmii_pins>; + pinctrl-names = "default"; + + phy-handle = <ð_phy0>; + phy-mode = "rgmii"; + + amlogic,tx-delay-ns = <2>; + + snps,reset-gpio = <&gpio GPIOZ_14 0>; + snps,reset-delays-us = <0 10000 1000000>; + snps,reset-active-low; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + eth_phy0: ethernet-phy@0 { + /* Realtek RTL8211F (0x001cc916) */ + reg = <0>; + }; + }; +}; + &i2c_A { status = "okay"; pinctrl-0 = <&i2c_a_pins>; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi index 04b3324bc132..4afe1c46ec11 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb.dtsi @@ -97,17 +97,6 @@ }; }; -&cbus { - spifc: spi@8c80 { - compatible = "amlogic,meson-gxbb-spifc"; - reg = <0x0 0x08c80 0x0 0x80>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&clkc CLKID_SPI>; - status = "disabled"; - }; -}; - ðmac { clocks = <&clkc CLKID_ETH>, <&clkc CLKID_FCLK_DIV2>, @@ -129,6 +118,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 0 14>; }; uart_ao_a_pins: uart_ao_a { @@ -203,30 +193,62 @@ function = "pwm_ao_b"; }; }; - }; - clkc_AO: clock-controller@040 { - compatible = "amlogic,gxbb-aoclkc"; - reg = <0x0 0x00040 0x0 0x4>; - #clock-cells = <1>; - #reset-cells = <1>; - }; + i2s_am_clk_pins: i2s_am_clk { + mux { + groups = "i2s_am_clk"; + function = "i2s_out_ao"; + }; + }; - pwm_ab_AO: pwm@550 { - compatible = "amlogic,meson-gxbb-pwm"; - reg = <0x0 0x0550 0x0 0x10>; - #pwm-cells = <3>; - status = "disabled"; - }; + i2s_out_ao_clk_pins: i2s_out_ao_clk { + mux { + groups = "i2s_out_ao_clk"; + function = "i2s_out_ao"; + }; + }; - i2c_AO: i2c@500 { - compatible = "amlogic,meson-gxbb-i2c"; - reg = <0x0 0x500 0x0 0x20>; - interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>; - clocks = <&clkc CLKID_AO_I2C>; - #address-cells = <1>; - #size-cells = <0>; - status = "disabled"; + i2s_out_lr_clk_pins: i2s_out_lr_clk { + mux { + groups = "i2s_out_lr_clk"; + function = "i2s_out_ao"; + }; + }; + + i2s_out_ch01_ao_pins: i2s_out_ch01_ao { + mux { + groups = "i2s_out_ch01_ao"; + function = "i2s_out_ao"; + }; + }; + + i2s_out_ch23_ao_pins: i2s_out_ch23_ao { + mux { + groups = "i2s_out_ch23_ao"; + function = "i2s_out_ao"; + }; + }; + + i2s_out_ch45_ao_pins: i2s_out_ch45_ao { + mux { + groups = "i2s_out_ch45_ao"; + function = "i2s_out_ao"; + }; + }; + + spdif_out_ao_6_pins: spdif_out_ao_6 { + mux { + groups = "spdif_out_ao_6"; + function = "spdif_out_ao"; + }; + }; + + spdif_out_ao_13_pins: spdif_out_ao_13 { + mux { + groups = "spdif_out_ao_13"; + function = "spdif_out_ao"; + }; + }; }; }; @@ -245,6 +267,7 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_periphs 0 14 120>; }; emmc_pins: emmc { @@ -467,6 +490,34 @@ function = "hdmi_i2c"; }; }; + + i2sout_ch23_y_pins: i2sout_ch23_y { + mux { + groups = "i2sout_ch23_y"; + function = "i2s_out"; + }; + }; + + i2sout_ch45_y_pins: i2sout_ch45_y { + mux { + groups = "i2sout_ch45_y"; + function = "i2s_out"; + }; + }; + + i2sout_ch67_y_pins: i2sout_ch67_y { + mux { + groups = "i2sout_ch67_y"; + function = "i2s_out"; + }; + }; + + spdif_out_y_pins: spdif_out_y { + mux { + groups = "spdif_out_y"; + function = "spdif_out"; + }; + }; }; }; @@ -478,10 +529,51 @@ }; }; +&apb { + mali: gpu@c0000 { + compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + reg = <0x0 0xc0000 0x0 0x40000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>; /* Do Nothing */ + }; +}; + &i2c_A { clocks = <&clkc CLKID_I2C>; }; +&i2c_AO { + clocks = <&clkc CLKID_AO_I2C>; +}; + &i2c_B { clocks = <&clkc CLKID_I2C>; }; @@ -521,6 +613,22 @@ clock-names = "core", "clkin0", "clkin1"; }; +&spifc { + clocks = <&clkc CLKID_SPI>; +}; + &vpu { compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu"; }; + +&hdmi_tx { + compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_HDMI_TX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + clock-names = "isfr", "iahb", "venci"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi new file mode 100644 index 000000000000..f06cc234693b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-mali.dtsi @@ -0,0 +1,43 @@ +/* + * Copyright (c) 2017 BayLibre SAS + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +&apb { + mali: gpu@c0000 { + compatible = "amlogic,meson-gxbb-mali", "arm,mali-450"; + reg = <0x0 0xc0000 0x0 0x40000>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 166 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "gp", "gpmmu", "pp", "pmu", + "pp0", "ppmmu0", "pp1", "ppmmu1", + "pp2", "ppmmu2"; + clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>; + clock-names = "bus", "core"; + + /* + * Mali clocking is provided by two identical clock paths + * MALI_0 and MALI_1 muxed to a single clock by a glitch + * free mux to safely change frequency while running. + */ + assigned-clocks = <&clkc CLKID_MALI_0_SEL>, + <&clkc CLKID_MALI_0>, + <&clkc CLKID_MALI>; /* Glitch free mux */ + assigned-clock-parents = <&clkc CLKID_FCLK_DIV3>, + <0>, /* Do Nothing */ + <&clkc CLKID_MALI_0>; + assigned-clock-rates = <0>, /* Do Nothing */ + <666666666>, + <0>; /* Do Nothing */ + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts index f66939cacd37..f9fbfdad8dde 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d-p230.dts @@ -43,12 +43,47 @@ /dts-v1/; +#include <dt-bindings/input/input.h> + #include "meson-gxl-s905d.dtsi" #include "meson-gx-p23x-q20x.dtsi" / { compatible = "amlogic,p230", "amlogic,s905d", "amlogic,meson-gxl"; model = "Amlogic Meson GXL (S905D) P230 Development Board"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; }; /* P230 has exclusive choice between internal or external PHY */ @@ -59,6 +94,8 @@ /* Select external PHY by default */ phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + /* External PHY reset is shared with internal PHY Led signals */ snps,reset-gpio = <&gpio GPIOZ_14 0>; snps,reset-delays-us = <0 10000 1000000>; @@ -75,3 +112,8 @@ max-speed = <1000>; }; }; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi index 615308e55576..5a90e30c1006 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905d.dtsi @@ -42,6 +42,7 @@ */ #include "meson-gxl.dtsi" +#include "meson-gxl-mali.dtsi" / { compatible = "amlogic,s905d", "amlogic,meson-gxl"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts new file mode 100644 index 000000000000..2a5804ce7f4b --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-hwacom-amazetv.dts @@ -0,0 +1,164 @@ +/* + * Copyright (c) 2017 Carlo Caione + * Copyright (c) 2016 BayLibre, Inc. + * Author: Neil Armstrong <narmstrong@kernel.org> + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include "meson-gxl-s905x.dtsi" + +/ { + compatible = "hwacom,amazetv", "amlogic,s905x", "amlogic,meson-gxl"; + model = "Hwacom AmazeTV (S905X)"; + + aliases { + serial0 = &uart_AO; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vddio_card: gpio-regulator { + compatible = "regulator-gpio"; + + regulator-name = "VDDIO_CARD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; + gpios-states = <1>; + + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ + states = <1800000 0 + 3300000 1>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; + + cvbs-connector { + compatible = "composite-video-connector"; + + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; + }; +}; + +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; + }; +}; + +ðmac { + status = "okay"; + phy-mode = "rmii"; + phy-handle = <&internal_phy>; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_card>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <100000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts new file mode 100644 index 000000000000..3c8b0b51ef27 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-khadas-vim.dts @@ -0,0 +1,114 @@ +/* + * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> + +#include "meson-gxl-s905x-p212.dtsi" + +/ { + compatible = "khadas,vim", "amlogic,s905x", "amlogic,meson-gxl"; + model = "Khadas VIM"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Function"; + linux,code = <KEY_FN>; + press-threshold-microvolt = <10000>; + }; + }; + + aliases { + serial2 = &uart_AO_B; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + pwmleds { + compatible = "pwm-leds"; + + power { + label = "vim:red:power"; + pwms = <&pwm_AO_ab 1 7812500 0>; + max-brightness = <255>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&i2c_A { + status = "okay"; + pinctrl-0 = <&i2c_a_pins>; + pinctrl-names = "default"; +}; + +&i2c_B { + status = "okay"; + pinctrl-0 = <&i2c_b_pins>; + pinctrl-names = "default"; + + rtc: rtc@51 { + /* has to be enabled manually when a battery is connected: */ + status = "disabled"; + compatible = "haoyu,hym8563"; + reg = <0x51>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + }; +}; + +&ir { + linux,rc-map-name = "rc-geekbox"; +}; + +&pwm_AO_ab { + status = "okay"; + pinctrl-0 = <&pwm_ao_a_3_pins>, <&pwm_ao_b_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +&pwm_ef { + pinctrl-0 = <&pwm_e_pins>, <&pwm_f_clk_pins>; +}; + +&sd_emmc_a { + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +/* This is brought out on the Linux_RX (18) and Linux_TX (19) pins: */ +&uart_AO { + status = "okay"; +}; + +/* This is brought out on the UART_RX_AO_B (15) and UART_TX_AO_B (16) pins: */ +&uart_AO_B { + status = "okay"; + pinctrl-0 = <&uart_ao_b_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts index cea4a3eded9b..8873c058fad2 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-nexbox-a95x.dts @@ -127,6 +127,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; &uart_AO { @@ -219,3 +230,15 @@ remote-endpoint = <&cvbs_connector_in>; }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts index 9639f012b02b..db31e093f40e 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dts @@ -43,23 +43,26 @@ /dts-v1/; -#include "meson-gxl-s905x.dtsi" +#include "meson-gxl-s905x-p212.dtsi" / { compatible = "amlogic,p212", "amlogic,s905x", "amlogic,meson-gxl"; model = "Amlogic Meson GXL (S905X) P212 Development Board"; - aliases { - serial0 = &uart_AO; - }; + cvbs-connector { + compatible = "composite-video-connector"; - chosen { - stdout-path = "serial0:115200n8"; + port { + cvbs_connector_in: endpoint { + remote-endpoint = <&cvbs_vdac_out>; + }; + }; }; +}; - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x80000000>; +&cvbs_vdac_port { + cvbs_vdac_out: endpoint { + remote-endpoint = <&cvbs_connector_in>; }; }; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi new file mode 100644 index 000000000000..f3eea8e89d12 --- /dev/null +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x-p212.dtsi @@ -0,0 +1,173 @@ +/* + * Copyright (c) 2016 Martin Blumenstingl <martin.blumenstingl@googlemail.com>. + * Based on meson-gx-p23x-q20x.dtsi: + * - Copyright (c) 2016 Endless Computers, Inc. + * Author: Carlo Caione <carlo@endlessm.com> + * - Copyright (c) 2016 BayLibre, SAS. + * Author: Neil Armstrong <narmstrong@baylibre.com> + * + * SPDX-License-Identifier: (GPL-2.0+ OR MIT) + */ + +/* Common DTSI for devices which are based on the P212 reference board. */ + +#include "meson-gxl-s905x.dtsi" + +/ { + aliases { + serial0 = &uart_AO; + serial1 = &uart_A; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory@0 { + device_type = "memory"; + reg = <0x0 0x0 0x0 0x80000000>; + }; + + vddio_boot: regulator-vddio_boot { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_BOOT"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddao_3v3: regulator-vddao_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VDDAO_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vcc_3v3: regulator-vcc_3v3 { + compatible = "regulator-fixed"; + regulator-name = "VCC_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + emmc_pwrseq: emmc-pwrseq { + compatible = "mmc-pwrseq-emmc"; + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; + }; + + wifi32k: wifi32k { + compatible = "pwm-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; + clocks = <&wifi32k>; + clock-names = "ext_clock"; + }; +}; + +ðmac { + status = "okay"; +}; + +&ir { + status = "okay"; + pinctrl-0 = <&remote_input_ao_pins>; + pinctrl-names = "default"; +}; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; + +/* Wireless SDIO Module */ +&sd_emmc_a { + status = "okay"; + pinctrl-0 = <&sdio_pins>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + + non-removable; + disable-wp; + + mmc-pwrseq = <&sdio_pwrseq>; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* SD card */ +&sd_emmc_b { + status = "okay"; + pinctrl-0 = <&sdcard_pins>; + pinctrl-names = "default"; + + bus-width = <4>; + cap-sd-highspeed; + max-frequency = <100000000>; + disable-wp; + + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_HIGH>; + cd-inverted; + + vmmc-supply = <&vddao_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +/* eMMC */ +&sd_emmc_c { + status = "okay"; + pinctrl-0 = <&emmc_pins>; + pinctrl-names = "default"; + + bus-width = <8>; + cap-sd-highspeed; + cap-mmc-highspeed; + max-frequency = <200000000>; + non-removable; + disable-wp; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + + mmc-pwrseq = <&emmc_pwrseq>; + vmmc-supply = <&vcc_3v3>; + vqmmc-supply = <&vddio_boot>; +}; + +&pwm_ef { + status = "okay"; + pinctrl-0 = <&pwm_e_pins>; + pinctrl-names = "default"; + clocks = <&clkc CLKID_FCLK_DIV4>; + clock-names = "clkin0"; +}; + +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; +}; + +&uart_AO { + status = "okay"; + pinctrl-0 = <&uart_ao_a_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi index 08237ee1e362..0f78d836edaf 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl-s905x.dtsi @@ -42,6 +42,7 @@ */ #include "meson-gxl.dtsi" +#include "meson-gxl-mali.dtsi" / { compatible = "amlogic,s905x", "amlogic,meson-gxl"; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi index fe11b5fc61f7..d8e096dff10a 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi @@ -44,6 +44,7 @@ #include "meson-gx.dtsi" #include <dt-bindings/clock/gxbb-clkc.h> #include <dt-bindings/gpio/meson-gxl-gpio.h> +#include <dt-bindings/reset/amlogic,meson-gxbb-reset.h> / { compatible = "amlogic,meson-gxl"; @@ -79,6 +80,7 @@ reg-names = "mux", "pull", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_aobus 0 0 14>; }; uart_ao_a_pins: uart_ao_a { @@ -103,6 +105,13 @@ }; }; + uart_ao_b_0_1_pins: uart_ao_b_0_1 { + mux { + groups = "uart_tx_ao_b_0", "uart_rx_ao_b_1"; + function = "uart_ao_b"; + }; + }; + uart_ao_b_cts_rts_pins: uart_ao_b_cts_rts { mux { groups = "uart_cts_ao_b", @@ -118,12 +127,69 @@ }; }; + i2c_ao_pins: i2c_ao { + mux { + groups = "i2c_sck_ao", + "i2c_sda_ao"; + function = "i2c_ao"; + }; + }; + + pwm_ao_a_3_pins: pwm_ao_a_3 { + mux { + groups = "pwm_ao_a_3"; + function = "pwm_ao_a"; + }; + }; + + pwm_ao_a_8_pins: pwm_ao_a_8 { + mux { + groups = "pwm_ao_a_8"; + function = "pwm_ao_a"; + }; + }; + pwm_ao_b_pins: pwm_ao_b { mux { groups = "pwm_ao_b"; function = "pwm_ao_b"; }; }; + + pwm_ao_b_6_pins: pwm_ao_b_6 { + mux { + groups = "pwm_ao_b_6"; + function = "pwm_ao_b"; + }; + }; + + i2s_out_ch23_ao_pins: i2s_out_ch23_ao { + mux { + groups = "i2s_out_ch23_ao"; + function = "i2s_out_ao"; + }; + }; + + i2s_out_ch45_ao_pins: i2s_out_ch45_ao { + mux { + groups = "i2s_out_ch45_ao"; + function = "i2s_out_ao"; + }; + }; + + spdif_out_ao_6_pins: spdif_out_ao_6 { + mux { + groups = "spdif_out_ao_6"; + function = "spdif_out_ao"; + }; + }; + + spdif_out_ao_9_pins: spdif_out_ao_9 { + mux { + groups = "spdif_out_ao_9"; + function = "spdif_out_ao"; + }; + }; }; }; @@ -142,6 +208,7 @@ reg-names = "mux", "pull", "pull-enable", "gpio"; gpio-controller; #gpio-cells = <2>; + gpio-ranges = <&pinctrl_periphs 0 14 101>; }; emmc_pins: emmc { @@ -154,6 +221,16 @@ }; }; + nor_pins: nor { + mux { + groups = "nor_d", + "nor_q", + "nor_c", + "nor_cs"; + function = "nor"; + }; + }; + sdcard_pins: sdcard { mux { groups = "sdcard_d0", @@ -277,6 +354,34 @@ }; }; + pwm_a_pins: pwm_a { + mux { + groups = "pwm_a"; + function = "pwm_a"; + }; + }; + + pwm_b_pins: pwm_b { + mux { + groups = "pwm_b"; + function = "pwm_b"; + }; + }; + + pwm_c_pins: pwm_c { + mux { + groups = "pwm_c"; + function = "pwm_c"; + }; + }; + + pwm_d_pins: pwm_d { + mux { + groups = "pwm_d"; + function = "pwm_d"; + }; + }; + pwm_e_pins: pwm_e { mux { groups = "pwm_e"; @@ -284,6 +389,20 @@ }; }; + pwm_f_clk_pins: pwm_f_clk { + mux { + groups = "pwm_f_clk"; + function = "pwm_f"; + }; + }; + + pwm_f_x_pins: pwm_f_x { + mux { + groups = "pwm_f_x"; + function = "pwm_f"; + }; + }; + hdmi_hpd_pins: hdmi_hpd { mux { groups = "hdmi_hpd"; @@ -297,6 +416,61 @@ function = "hdmi_i2c"; }; }; + + i2s_am_clk_pins: i2s_am_clk { + mux { + groups = "i2s_am_clk"; + function = "i2s_out"; + }; + }; + + i2s_out_ao_clk_pins: i2s_out_ao_clk { + mux { + groups = "i2s_out_ao_clk"; + function = "i2s_out"; + }; + }; + + i2s_out_lr_clk_pins: i2s_out_lr_clk { + mux { + groups = "i2s_out_lr_clk"; + function = "i2s_out"; + }; + }; + + i2s_out_ch01_pins: i2s_out_ch01 { + mux { + groups = "i2s_out_ch01"; + function = "i2s_out"; + }; + }; + i2sout_ch23_z_pins: i2sout_ch23_z { + mux { + groups = "i2sout_ch23_z"; + function = "i2s_out"; + }; + }; + + i2sout_ch45_z_pins: i2sout_ch45_z { + mux { + groups = "i2sout_ch45_z"; + function = "i2s_out"; + }; + }; + + i2sout_ch67_z_pins: i2sout_ch67_z { + mux { + groups = "i2sout_ch67_z"; + function = "i2s_out"; + }; + }; + + spdif_out_h_pins: spdif_out_ao_h { + mux { + groups = "spdif_out_h"; + function = "spdif_out"; + }; + }; }; eth-phy-mux { @@ -339,6 +513,10 @@ clocks = <&clkc CLKID_I2C>; }; +&i2c_AO { + clocks = <&clkc CLKID_AO_I2C>; +}; + &i2c_B { clocks = <&clkc CLKID_I2C>; }; @@ -378,6 +556,22 @@ clock-names = "core", "clkin0", "clkin1"; }; +&spifc { + clocks = <&clkc CLKID_SPI>; +}; + &vpu { compatible = "amlogic,meson-gxl-vpu", "amlogic,meson-gx-vpu"; }; + +&hdmi_tx { + compatible = "amlogic,meson-gxl-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; + resets = <&reset RESET_HDMITX_CAPB3>, + <&reset RESET_HDMI_SYSTEM_RESET>, + <&reset RESET_HDMI_TX>; + reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy"; + clocks = <&clkc CLKID_HDMI_PCLK>, + <&clkc CLKID_CLK81>, + <&clkc CLKID_GCLK_VENCI_INT0>; + clock-names = "isfr", "iahb", "venci"; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts index 5a337d339df1..11b0bf46a95c 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-nexbox-a1.dts @@ -100,6 +100,17 @@ }; }; }; + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_connector_in: endpoint { + remote-endpoint = <&hdmi_tx_tmds_out>; + }; + }; + }; }; /* This UART is brought out to the DB9 connector */ @@ -162,6 +173,8 @@ /* Select external PHY by default */ phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + snps,reset-gpio = <&gpio GPIOZ_14 0>; snps,reset-delays-us = <0 10000 1000000>; snps,reset-active-low; @@ -183,3 +196,15 @@ remote-endpoint = <&cvbs_connector_in>; }; }; + +&hdmi_tx { + status = "okay"; + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; + pinctrl-names = "default"; +}; + +&hdmi_tx_tmds_port { + hdmi_tx_tmds_out: endpoint { + remote-endpoint = <&hdmi_connector_in>; + }; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts index 5dbc66088355..b65776b01911 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts +++ b/arch/arm64/boot/dts/amlogic/meson-gxm-q200.dts @@ -43,12 +43,47 @@ /dts-v1/; +#include <dt-bindings/input/input.h> + #include "meson-gxm.dtsi" #include "meson-gx-p23x-q20x.dtsi" / { compatible = "amlogic,q200", "amlogic,s912", "amlogic,meson-gxm"; model = "Amlogic Meson GXM (S912) Q200 Development Board"; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1710000>; + + button-function { + label = "Update"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + + button@0 { + label = "power"; + linux,code = <KEY_POWER>; + gpios = <&gpio_ao GPIOAO_2 GPIO_ACTIVE_LOW>; + }; + }; + + vddio_ao18: regulator-vddio_ao18 { + compatible = "regulator-fixed"; + regulator-name = "VDDIO_AO18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; }; /* Q200 has exclusive choice between internal or external PHY */ @@ -59,6 +94,8 @@ /* Select external PHY by default */ phy-handle = <&external_phy>; + amlogic,tx-delay-ns = <2>; + /* External PHY reset is shared with internal PHY Led signals */ snps,reset-gpio = <&gpio GPIOZ_14 0>; snps,reset-delays-us = <0 10000 1000000>; @@ -75,3 +112,8 @@ max-speed = <1000>; }; }; + +&saradc { + status = "okay"; + vref-supply = <&vddio_ao18>; +}; diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi index ddea7305c644..fe451cce93e7 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi @@ -130,3 +130,6 @@ compatible = "amlogic,meson-gxm-vpu", "amlogic,meson-gx-vpu"; }; +&hdmi_tx { + compatible = "amlogic,meson-gxm-dw-hdmi", "amlogic,meson-gx-dw-hdmi"; +}; diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile index f1caece9d3a7..bfa8f8e4c5af 100644 --- a/arch/arm64/boot/dts/broadcom/Makefile +++ b/arch/arm64/boot/dts/broadcom/Makefile @@ -1,6 +1,5 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2837-rpi-3-b.dtb dtb-$(CONFIG_ARCH_BCM_IPROC) += ns2-svk.dtb ns2-xmc.dtb -dtb-$(CONFIG_ARCH_VULCAN) += vulcan-eval.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/broadcom/ns2-svk.dts b/arch/arm64/boot/dts/broadcom/ns2-svk.dts index 5ae08161649e..ec19fbf928a1 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-svk.dts +++ b/arch/arm64/boot/dts/broadcom/ns2-svk.dts @@ -57,55 +57,55 @@ }; &enet { - status = "ok"; + status = "okay"; }; &pci_phy0 { - status = "ok"; + status = "okay"; }; &pci_phy1 { - status = "ok"; + status = "okay"; }; &pcie0 { - status = "ok"; + status = "okay"; }; &pcie4 { - status = "ok"; + status = "okay"; }; &pcie8 { - status = "ok"; + status = "okay"; }; &i2c0 { - status = "ok"; + status = "okay"; }; &i2c1 { - status = "ok"; + status = "okay"; }; &uart0 { - status = "ok"; + status = "okay"; }; &uart1 { - status = "ok"; + status = "okay"; }; &uart2 { - status = "ok"; + status = "okay"; }; &uart3 { - status = "ok"; + status = "okay"; }; &ssp0 { - status = "ok"; + status = "okay"; slic@0 { compatible = "silabs,si3226x"; @@ -126,7 +126,7 @@ }; &ssp1 { - status = "ok"; + status = "okay"; at25@0 { compatible = "atmel,at25"; @@ -150,23 +150,23 @@ }; &sata_phy0 { - status = "ok"; + status = "okay"; }; &sata_phy1 { - status = "ok"; + status = "okay"; }; &sata { - status = "ok"; + status = "okay"; }; &sdio0 { - status = "ok"; + status = "okay"; }; &sdio1 { - status = "ok"; + status = "okay"; }; &nand { diff --git a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts index 99a2723cccd2..ab4ae1a32fab 100644 --- a/arch/arm64/boot/dts/broadcom/ns2-xmc.dts +++ b/arch/arm64/boot/dts/broadcom/ns2-xmc.dts @@ -54,15 +54,15 @@ }; &enet { - status = "ok"; + status = "okay"; }; &i2c0 { - status = "ok"; + status = "okay"; }; &i2c1 { - status = "ok"; + status = "okay"; }; &mdio_mux_iproc { @@ -122,27 +122,27 @@ }; &pci_phy0 { - status = "ok"; + status = "okay"; }; &pcie0 { - status = "ok"; + status = "okay"; }; &pcie8 { - status = "ok"; + status = "okay"; }; &sata_phy0 { - status = "ok"; + status = "okay"; }; &sata_phy1 { - status = "ok"; + status = "okay"; }; &sata { - status = "ok"; + status = "okay"; }; &qspi { @@ -187,5 +187,5 @@ }; &uart3 { - status = "ok"; + status = "okay"; }; diff --git a/arch/arm64/boot/dts/broadcom/ns2.dtsi b/arch/arm64/boot/dts/broadcom/ns2.dtsi index 9f9e203c09c5..b8503fc1bb54 100644 --- a/arch/arm64/boot/dts/broadcom/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/ns2.dtsi @@ -217,6 +217,12 @@ brcm,use-bcm-hdr; }; + crypto0: crypto@612d0000 { + compatible = "brcm,spum-crypto"; + reg = <0x612d0000 0x900>; + mboxes = <&pdc0 0>; + }; + pdc1: iproc-pdc1@612e0000 { compatible = "brcm,iproc-pdc-mbox"; reg = <0x612e0000 0x445>; /* PDC FS1 regs */ @@ -226,6 +232,12 @@ brcm,use-bcm-hdr; }; + crypto1: crypto@612f0000 { + compatible = "brcm,spum-crypto"; + reg = <0x612f0000 0x900>; + mboxes = <&pdc1 0>; + }; + pdc2: iproc-pdc2@61300000 { compatible = "brcm,iproc-pdc-mbox"; reg = <0x61300000 0x445>; /* PDC FS2 regs */ @@ -235,6 +247,12 @@ brcm,use-bcm-hdr; }; + crypto2: crypto@61310000 { + compatible = "brcm,spum-crypto"; + reg = <0x61310000 0x900>; + mboxes = <&pdc2 0>; + }; + pdc3: iproc-pdc3@61320000 { compatible = "brcm,iproc-pdc-mbox"; reg = <0x61320000 0x445>; /* PDC FS3 regs */ @@ -244,6 +262,12 @@ brcm,use-bcm-hdr; }; + crypto3: crypto@61330000 { + compatible = "brcm,spum-crypto"; + reg = <0x61330000 0x900>; + mboxes = <&pdc3 0>; + }; + dma0: dma@61360000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x61360000 0x1000>; diff --git a/arch/arm64/boot/dts/cavium/Makefile b/arch/arm64/boot/dts/cavium/Makefile index e34f89ddabb2..581b2c1c400a 100644 --- a/arch/arm64/boot/dts/cavium/Makefile +++ b/arch/arm64/boot/dts/cavium/Makefile @@ -1,4 +1,5 @@ dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb +dtb-$(CONFIG_ARCH_THUNDER2) += thunder2-99xx.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/broadcom/vulcan-eval.dts b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts index 9ee8d3da0e3f..6c6fb8692fde 100644 --- a/arch/arm64/boot/dts/broadcom/vulcan-eval.dts +++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dts @@ -1,6 +1,7 @@ /* - * dts file for Broadcom (BRCM) Vulcan Evaluation Platform + * dts file for Cavium ThunderX2 CN99XX Evaluation Platform * + * Copyright (c) 2017 Cavium Inc. * Copyright (c) 2013-2016 Broadcom * * This program is free software; you can redistribute it and/or @@ -11,11 +12,11 @@ /dts-v1/; -#include "vulcan.dtsi" +#include "thunder2-99xx.dtsi" / { - model = "Broadcom Vulcan Eval Platform"; - compatible = "brcm,vulcan-eval", "brcm,vulcan-soc"; + model = "Cavium ThunderX2 CN99XX"; + compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc"; memory { device_type = "memory"; diff --git a/arch/arm64/boot/dts/broadcom/vulcan.dtsi b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi index 34e11a9db2a0..4220fbdcb24a 100644 --- a/arch/arm64/boot/dts/broadcom/vulcan.dtsi +++ b/arch/arm64/boot/dts/cavium/thunder2-99xx.dtsi @@ -1,6 +1,7 @@ /* - * dtsi file for Broadcom (BRCM) Vulcan processor + * dtsi file for Cavium ThunderX2 CN99XX processor * + * Copyright (c) 2017 Cavium Inc. * Copyright (c) 2013-2016 Broadcom * Author: Zi Shen Lim <zlim@broadcom.com> * @@ -13,8 +14,8 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> / { - model = "Broadcom Vulcan"; - compatible = "brcm,vulcan-soc"; + model = "Cavium ThunderX2 CN99XX"; + compatible = "cavium,thunderx2-cn9900", "brcm,vulcan-soc"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -26,28 +27,28 @@ cpu@0 { device_type = "cpu"; - compatible = "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; reg = <0x0 0x0>; enable-method = "psci"; }; cpu@1 { device_type = "cpu"; - compatible = "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; reg = <0x0 0x1>; enable-method = "psci"; }; cpu@2 { device_type = "cpu"; - compatible = "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; reg = <0x0 0x2>; enable-method = "psci"; }; cpu@3 { device_type = "cpu"; - compatible = "brcm,vulcan", "arm,armv8"; + compatible = "cavium,thunder2", "brcm,vulcan", "arm,armv8"; reg = <0x0 0x3>; enable-method = "psci"; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 098ad557fee3..e2b0da2c0bc7 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -106,6 +106,13 @@ }; }; + irda_regulator: irda-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>; + regulator-name = "irda_regulator"; + }; + sound { compatible = "samsung,tm2-audio"; audio-codec = <&wm5110>; @@ -298,6 +305,8 @@ status = "okay"; vddcore-supply = <&ldo6_reg>; vddio-supply = <&ldo7_reg>; + samsung,burst-clock-frequency = <512000000>; + samsung,esc-clock-frequency = <16000000>; samsung,pll-clock-frequency = <24000000>; pinctrl-names = "default"; pinctrl-0 = <&te_irq>; @@ -749,6 +758,19 @@ }; }; +&hsi2c_5 { + status = "okay"; + + stmfts: touchscreen@49 { + compatible = "st,stmfts"; + reg = <0x49>; + interrupt-parent = <&gpa1>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + avdd-supply = <&ldo30_reg>; + vdd-supply = <&ldo31_reg>; + }; +}; + &hsi2c_7 { status = "okay"; @@ -894,7 +916,7 @@ PIN(INPUT, gpa0-7, NONE, FAST_SR1); PIN(INPUT, gpa1-0, UP, FAST_SR1); - PIN(INPUT, gpa1-1, NONE, FAST_SR1); + PIN(INPUT, gpa1-1, UP, FAST_SR1); PIN(INPUT, gpa1-2, NONE, FAST_SR1); PIN(INPUT, gpa1-3, DOWN, FAST_SR1); PIN(INPUT, gpa1-4, DOWN, FAST_SR1); @@ -1074,7 +1096,6 @@ PIN(INPUT, gpg3-0, DOWN, FAST_SR1); PIN(INPUT, gpg3-1, DOWN, FAST_SR1); PIN(INPUT, gpg3-5, DOWN, FAST_SR1); - PIN(INPUT, gpg3-7, DOWN, FAST_SR1); }; }; @@ -1152,6 +1173,24 @@ }; }; +&spi_3 { + status = "okay"; + no-cs-readback; + + irled@0 { + compatible = "ir-spi-led"; + reg = <0x0>; + spi-max-frequency = <5000000>; + power-supply = <&irda_regulator>; + duty-cycle = <60>; + led-active-low; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; +}; + &timer { clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts index dea0a6f5bc18..3ff95277a8ec 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2.dts @@ -52,6 +52,18 @@ assigned-clock-rates = <250000000>, <400000000>; }; +&dsi { + panel@0 { + compatible = "samsung,s6e3ha2"; + reg = <0>; + vdd3-supply = <&ldo27_reg>; + vci-supply = <&ldo28_reg>; + reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>; + enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>; + te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>; + }; +}; + &hsi2c_9 { status = "okay"; @@ -76,3 +88,8 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; }; + +&stmfts { + touchscreen-size-x = <1439>; + touchscreen-size-y = <2559>; +}; diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts index 7891a31adc17..694717ade927 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts @@ -63,3 +63,10 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; + +&stmfts { + touchscreen-size-x = <1599>; + touchscreen-size-y = <2559>; + touch-key-connected; + ledvdd-supply = <&ldo33_reg>; +}; diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 39db645b268e..72c4b525726f 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -5,9 +5,13 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1043a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1046a-rdb.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1088a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-qds.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-rdb.dtb dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2080a-simu.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-qds.dtb +dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls2088a-rdb.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts index a619f6496a4c..17fae8112e4d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-frdm.dts @@ -113,3 +113,7 @@ &sai2 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts index 14a67f1709e7..e2a93d53d3d8 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-qds.dts @@ -126,3 +126,7 @@ &sai2 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts index 62c5c7123a15..ed77f6b0937b 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-rdb.dts @@ -57,3 +57,7 @@ &i2c0 { status = "okay"; }; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi index cffebb4b3df1..b497ac196ccc 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi @@ -42,7 +42,8 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> / { compatible = "fsl,ls1012a"; @@ -50,6 +51,15 @@ #address-cells = <2>; #size-cells = <2>; + aliases { + crypto = &crypto; + rtic_a = &rtic_a; + rtic_b = &rtic_b; + rtic_c = &rtic_c; + rtic_d = &rtic_d; + sec_mon = &sec_mon; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -113,6 +123,95 @@ big-endian; }; + crypto: crypto@1700000 { + compatible = "fsl,sec-v5.4", "fsl,sec-v5.0", + "fsl,sec-v4.0"; + fsl,sec-era = <8>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x00 0x1700000 0x100000>; + reg = <0x00 0x1700000 0x0 0x100000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + + sec_jr0: jr@10000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x10000 0x10000>; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr1: jr@20000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x20000 0x10000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr2: jr@30000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x30000 0x10000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + }; + + sec_jr3: jr@40000 { + compatible = "fsl,sec-v5.4-job-ring", + "fsl,sec-v5.0-job-ring", + "fsl,sec-v4.0-job-ring"; + reg = <0x40000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + }; + + rtic@60000 { + compatible = "fsl,sec-v5.4-rtic", + "fsl,sec-v5.0-rtic", + "fsl,sec-v4.0-rtic"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x60000 0x100 0x60e00 0x18>; + ranges = <0x0 0x60100 0x500>; + + rtic_a: rtic-a@0 { + compatible = "fsl,sec-v5.4-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x00 0x20 0x100 0x100>; + }; + + rtic_b: rtic-b@20 { + compatible = "fsl,sec-v5.4-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x20 0x20 0x200 0x100>; + }; + + rtic_c: rtic-c@40 { + compatible = "fsl,sec-v5.4-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x40 0x20 0x300 0x100>; + }; + + rtic_d: rtic-d@60 { + compatible = "fsl,sec-v5.4-rtic-memory", + "fsl,sec-v5.0-rtic-memory", + "fsl,sec-v4.0-rtic-memory"; + reg = <0x60 0x20 0x400 0x100>; + }; + }; + }; + + sec_mon: sec_mon@1e90000 { + compatible = "fsl,sec-v5.4-mon", "fsl,sec-v5.0-mon", + "fsl,sec-v4.0-mon"; + reg = <0x0 0x1e90000 0x0 0x10000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + }; + dcfg: dcfg@1ee0000 { compatible = "fsl,ls1012a-dcfg", "syscon"; @@ -127,6 +226,82 @@ clocks = <&sysclk>; }; + tmu: tmu@1f00000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f00000 0x0 0x10000>; + interrupts = <0 33 0x4>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-calibration = <0x00000000 0x00000026 + 0x00000001 0x0000002d + 0x00000002 0x00000032 + 0x00000003 0x00000039 + 0x00000004 0x0000003f + 0x00000005 0x00000046 + 0x00000006 0x0000004d + 0x00000007 0x00000054 + 0x00000008 0x0000005a + 0x00000009 0x00000061 + 0x0000000a 0x0000006a + 0x0000000b 0x00000071 + + 0x00010000 0x00000025 + 0x00010001 0x0000002c + 0x00010002 0x00000035 + 0x00010003 0x0000003d + 0x00010004 0x00000045 + 0x00010005 0x0000004e + 0x00010006 0x00000057 + 0x00010007 0x00000061 + 0x00010008 0x0000006b + 0x00010009 0x00000076 + + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000049 + 0x00020004 0x00000056 + 0x00020005 0x00000061 + 0x00020006 0x0000006d + + 0x00030000 0x00000021 + 0x00030001 0x0000002a + 0x00030002 0x0000003c + 0x00030003 0x0000004e>; + big-endian; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + thermal-sensors = <&tmu 0>; + + trips { + cpu_alert: cpu-alert { + temperature = <85000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu_crit: cpu-crit { + temperature = <95000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + i2c0: i2c@2180000 { compatible = "fsl,vf610-i2c"; #address-cells = <1>; @@ -238,9 +413,12 @@ sata: sata@3200000 { compatible = "fsl,ls1012a-ahci", "fsl,ls1043a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 0>; + dma-coherent; status = "disabled"; }; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi index ec13a6ecb754..45cface08cbb 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi @@ -582,7 +582,9 @@ sata: sata@3200000 { compatible = "fsl,ls1043a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; interrupts = <0 69 0x4>; clocks = <&clockgen 4 0>; dma-coherent; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi index 4a164b801882..f4b8b7edaf9d 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi @@ -587,7 +587,9 @@ sata: sata@3200000 { compatible = "fsl,ls1046a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>; + reg = <0x0 0x3200000 0x0 0x10000>, + <0x0 0x20140520 0x0 0x4>; + reg-names = "ahci", "sata-ecc"; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clockgen 4 1>; }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts new file mode 100644 index 000000000000..8c3cae530f8f --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dts @@ -0,0 +1,123 @@ +/* + * Device Tree file for NXP LS1088A QDS Board. + * + * Copyright 2017 NXP + * + * Harninder Rai <harninder.rai@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls1088a.dtsi" + +/ { + model = "LS1088A QDS Board"; + compatible = "fsl,ls1088a-qds", "fsl,ls1088a"; +}; + +&i2c0 { + status = "okay"; + + i2c-switch@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temp-sensor@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + /* IRQ10_B */ + interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + }; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts new file mode 100644 index 000000000000..8a04fbb25cb4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts @@ -0,0 +1,107 @@ +/* + * Device Tree file for NXP LS1088A RDB Board. + * + * Copyright 2017 NXP + * + * Harninder Rai <harninder.rai@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls1088a.dtsi" + +/ { + model = "L1088A RDB Board"; + compatible = "fsl,ls1088a-rdb", "fsl,ls1088a"; +}; + +&i2c0 { + status = "okay"; + + i2c-switch@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + temp-sensor@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + + rtc@51 { + compatible = "nxp,pcf2129"; + reg = <0x51>; + /* IRQ10_B */ + interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; +}; + +&duart0 { + status = "okay"; +}; + +&duart1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi new file mode 100644 index 000000000000..2946fd797121 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi @@ -0,0 +1,275 @@ +/* + * Device Tree Include file for NXP Layerscape-1088A family SoC. + * + * Copyright 2017 NXP + * + * Harninder Rai <harninder.rai@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "fsl,ls1088a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + /* We have 2 clusters having 4 Cortex-A53 cores each */ + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x1>; + clocks = <&clockgen 1 0>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x2>; + clocks = <&clockgen 1 0>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x3>; + clocks = <&clockgen 1 0>; + }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x100>; + clocks = <&clockgen 1 1>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x101>; + clocks = <&clockgen 1 1>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x102>; + clocks = <&clockgen 1 1>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x103>; + clocks = <&clockgen 1 1>; + }; + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>, /* GICR(RD_base+SGI_base)*/ + <0x0 0x0c0c0000 0 0x2000>, /* GICC */ + <0x0 0x0c0d0000 0 0x1000>, /* GICH */ + <0x0 0x0c0e0000 0 0x20000>; /* GICV */ + interrupts = <1 9 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 IRQ_TYPE_LEVEL_LOW>,/* Physical Secure PPI */ + <1 14 IRQ_TYPE_LEVEL_LOW>,/* Physical Non-Secure PPI */ + <1 11 IRQ_TYPE_LEVEL_LOW>,/* Virtual PPI */ + <1 10 IRQ_TYPE_LEVEL_LOW>;/* Hypervisor PPI */ + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clockgen: clocking@1300000 { + compatible = "fsl,ls1088a-clockgen"; + reg = <0 0x1300000 0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + duart0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + duart1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2320000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2330000 { + compatible = "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + ifc: ifc@2240000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x2240000 0x0 0x20000>; + interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>; + little-endian; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x5 0x80000000 0x08000000 + 2 0 0x5 0x30000000 0x00010000 + 3 0 0x5 0x20000000 0x00010000>; + status = "disabled"; + }; + + i2c0: i2c@2000000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + i2c1: i2c@2010000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + i2c2: i2c@2020000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + i2c3: i2c@2030000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + + sata: sata@3200000 { + compatible = "fsl,ls1088a-ahci", "fsl,ls1043a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clockgen 4 3>; + status = "disabled"; + }; + }; + +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts index 8bc1f8f6fcfc..c1e76dfca48e 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-qds.dts @@ -1,8 +1,9 @@ /* * Device Tree file for Freescale LS2080a QDS Board. * - * Copyright (C) 2015, Freescale Semiconductor + * Copyright (C) 2015-17, Freescale Semiconductor * + * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> * * This file is dual-licensed: you can use it either under the terms @@ -47,6 +48,7 @@ /dts-v1/; #include "fsl-ls2080a.dtsi" +#include "fsl-ls208xa-qds.dtsi" / { model = "Freescale Layerscape 2080a QDS Board"; @@ -61,154 +63,3 @@ stdout-path = "serial0:115200n8"; }; }; - -&esdhc { - status = "okay"; -}; - -&ifc { - status = "okay"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0x0 0x0 0x5 0x80000000 0x08000000 - 0x2 0x0 0x5 0x30000000 0x00010000 - 0x3 0x0 0x5 0x20000000 0x00010000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - }; - - nand@2,0 { - compatible = "fsl,ifc-nand"; - reg = <0x2 0x0 0x10000>; - }; - - cpld@3,0 { - reg = <0x3 0x0 0x10000>; - compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; - }; -}; - -&i2c0 { - status = "okay"; - pca9547@77 { - compatible = "nxp,pca9547"; - reg = <0x77>; - #address-cells = <1>; - #size-cells = <0>; - i2c@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x00>; - rtc@68 { - compatible = "dallas,ds3232"; - reg = <0x68>; - }; - }; - - i2c@2 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x02>; - - ina220@40 { - compatible = "ti,ina220"; - reg = <0x40>; - shunt-resistor = <500>; - }; - - ina220@41 { - compatible = "ti,ina220"; - reg = <0x41>; - shunt-resistor = <1000>; - }; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x3>; - - adt7481@4c { - compatible = "adi,adt7461"; - reg = <0x4c>; - }; - }; - }; -}; - -&i2c1 { - status = "disabled"; -}; - -&i2c2 { - status = "disabled"; -}; - -&i2c3 { - status = "disabled"; -}; - -&dspi { - status = "okay"; - dflash0: n25q128a { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80"; - spi-max-frequency = <3000000>; - reg = <0>; - }; - dflash1: sst25wf040b { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80"; - spi-max-frequency = <3000000>; - reg = <1>; - }; - dflash2: en25s64 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80"; - spi-max-frequency = <3000000>; - reg = <2>; - }; -}; - -&qspi { - status = "okay"; - flash0: s25fl256s1@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80"; - spi-max-frequency = <20000000>; - reg = <0>; - }; - flash2: s25fl256s1@2 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80"; - spi-max-frequency = <20000000>; - reg = <0>; - }; -}; - -&sata0 { - status = "okay"; -}; - -&sata1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts index 2ff46ca450b1..18ad19587311 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a-rdb.dts @@ -1,8 +1,9 @@ /* * Device Tree file for Freescale LS2080a RDB Board. * - * Copyright (C) 2015, Freescale Semiconductor + * Copyright (C) 2016-17, Freescale Semiconductor * + * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> * * This file is dual-licensed: you can use it either under the terms @@ -47,6 +48,7 @@ /dts-v1/; #include "fsl-ls2080a.dtsi" +#include "fsl-ls208xa-rdb.dtsi" / { model = "Freescale Layerscape 2080a RDB Board"; @@ -61,109 +63,3 @@ stdout-path = "serial1:115200n8"; }; }; - -&esdhc { - status = "okay"; -}; - -&ifc { - status = "okay"; - #address-cells = <2>; - #size-cells = <1>; - ranges = <0x0 0x0 0x5 0x80000000 0x08000000 - 0x2 0x0 0x5 0x30000000 0x00010000 - 0x3 0x0 0x5 0x20000000 0x00010000>; - - nor@0,0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "cfi-flash"; - reg = <0x0 0x0 0x8000000>; - bank-width = <2>; - device-width = <1>; - }; - - nand@2,0 { - compatible = "fsl,ifc-nand"; - reg = <0x2 0x0 0x10000>; - }; - - cpld@3,0 { - reg = <0x3 0x0 0x10000>; - compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; - }; - -}; - -&i2c0 { - status = "okay"; - pca9547@75 { - compatible = "nxp,pca9547"; - reg = <0x75>; - #address-cells = <1>; - #size-cells = <0>; - i2c@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x01>; - rtc@68 { - compatible = "dallas,ds3232"; - reg = <0x68>; - }; - }; - - i2c@3 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0x3>; - - adt7481@4c { - compatible = "adi,adt7461"; - reg = <0x4c>; - }; - }; - }; -}; - -&i2c1 { - status = "disabled"; -}; - -&i2c2 { - status = "disabled"; -}; - -&i2c3 { - status = "disabled"; -}; - -&dspi { - status = "okay"; - dflash0: n25q512a { - #address-cells = <1>; - #size-cells = <1>; - compatible = "st,m25p80"; - spi-max-frequency = <3000000>; - reg = <0>; - }; -}; - -&qspi { - status = "disabled"; -}; - -&sata0 { - status = "okay"; -}; - -&sata1 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&usb1 { - status = "okay"; -}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi index e5935f28848c..46a26c021421 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi +++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi @@ -1,8 +1,9 @@ /* * Device Tree Include file for Freescale Layerscape-2080A family SoC. * - * Copyright (C) 2014-2015, Freescale Semiconductor + * Copyright (C) 2014-2016, Freescale Semiconductor * + * Abhimanyu Saini <abhimanyu.saini@nxp.com> * Bhupesh Sharma <bhupesh.sharma@freescale.com> * * This file is dual-licensed: you can use it either under the terms @@ -44,802 +45,122 @@ * OTHER DEALINGS IN THE SOFTWARE. */ -#include <dt-bindings/thermal/thermal.h> +#include "fsl-ls208xa.dtsi" -/ { - compatible = "fsl,ls2080a"; - interrupt-parent = <&gic>; - #address-cells = <2>; - #size-cells = <2>; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - /* - * We expect the enable-method for cpu's to be "psci", but this - * is dependent on the SoC FW, which will fill this in. - * - * Currently supported enable-method is psci v0.2 - */ - - /* We have 4 clusters having 2 Cortex-A57 cores each */ - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x0>; - clocks = <&clockgen 1 0>; - next-level-cache = <&cluster0_l2>; - #cooling-cells = <2>; - }; - - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x1>; - clocks = <&clockgen 1 0>; - next-level-cache = <&cluster0_l2>; - }; - - cpu2: cpu@100 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x100>; - clocks = <&clockgen 1 1>; - next-level-cache = <&cluster1_l2>; - #cooling-cells = <2>; - }; - - cpu3: cpu@101 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x101>; - clocks = <&clockgen 1 1>; - next-level-cache = <&cluster1_l2>; - }; - - cpu4: cpu@200 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x200>; - clocks = <&clockgen 1 2>; - next-level-cache = <&cluster2_l2>; - #cooling-cells = <2>; - }; - - cpu5: cpu@201 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x201>; - clocks = <&clockgen 1 2>; - next-level-cache = <&cluster2_l2>; - }; - - cpu6: cpu@300 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x300>; - clocks = <&clockgen 1 3>; - next-level-cache = <&cluster3_l2>; - #cooling-cells = <2>; - }; - - cpu7: cpu@301 { - device_type = "cpu"; - compatible = "arm,cortex-a57"; - reg = <0x301>; - clocks = <&clockgen 1 3>; - next-level-cache = <&cluster3_l2>; - }; - - cluster0_l2: l2-cache0 { - compatible = "cache"; - }; - - cluster1_l2: l2-cache1 { - compatible = "cache"; - }; - - cluster2_l2: l2-cache2 { - compatible = "cache"; - }; - - cluster3_l2: l2-cache3 { - compatible = "cache"; - }; +&cpu { + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; }; - memory@80000000 { - device_type = "memory"; - reg = <0x00000000 0x80000000 0 0x80000000>; - /* DRAM space - 1, size : 2 GB DRAM */ + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x1>; + clocks = <&clockgen 1 0>; + next-level-cache = <&cluster0_l2>; }; - sysclk: sysclk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - clock-output-names = "sysclk"; + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x100>; + clocks = <&clockgen 1 1>; + next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; }; - gic: interrupt-controller@6000000 { - compatible = "arm,gic-v3"; - reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ - <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */ - <0x0 0x0c0c0000 0 0x2000>, /* GICC */ - <0x0 0x0c0d0000 0 0x1000>, /* GICH */ - <0x0 0x0c0e0000 0 0x20000>; /* GICV */ - #interrupt-cells = <3>; - #address-cells = <2>; - #size-cells = <2>; - ranges; - interrupt-controller; - interrupts = <1 9 0x4>; - - its: gic-its@6020000 { - compatible = "arm,gic-v3-its"; - msi-controller; - reg = <0x0 0x6020000 0 0x20000>; - }; + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x101>; + clocks = <&clockgen 1 1>; + next-level-cache = <&cluster1_l2>; }; - rstcr: syscon@1e60000 { - compatible = "fsl,ls2080a-rstcr", "syscon"; - reg = <0x0 0x1e60000 0x0 0x4>; + cpu4: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x200>; + clocks = <&clockgen 1 2>; + next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; }; - reboot { - compatible ="syscon-reboot"; - regmap = <&rstcr>; - offset = <0x0>; - mask = <0x2>; + cpu5: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x201>; + clocks = <&clockgen 1 2>; + next-level-cache = <&cluster2_l2>; }; - timer { - compatible = "arm,armv8-timer"; - interrupts = <1 13 4>, /* Physical Secure PPI, active-low */ - <1 14 4>, /* Physical Non-Secure PPI, active-low */ - <1 11 4>, /* Virtual PPI, active-low */ - <1 10 4>; /* Hypervisor PPI, active-low */ - fsl,erratum-a008585; + cpu6: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x300>; + clocks = <&clockgen 1 3>; + next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; }; - pmu { - compatible = "arm,armv8-pmuv3"; - interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ + cpu7: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a57"; + reg = <0x301>; + clocks = <&clockgen 1 3>; + next-level-cache = <&cluster3_l2>; }; - soc { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - clockgen: clocking@1300000 { - compatible = "fsl,ls2080a-clockgen"; - reg = <0 0x1300000 0 0xa0000>; - #clock-cells = <2>; - clocks = <&sysclk>; - }; - - dcfg: dcfg@1e00000 { - compatible = "fsl,ls2080a-dcfg", "syscon"; - reg = <0x0 0x1e00000 0x0 0x10000>; - little-endian; - }; - - tmu: tmu@1f80000 { - compatible = "fsl,qoriq-tmu"; - reg = <0x0 0x1f80000 0x0 0x10000>; - interrupts = <0 23 0x4>; - fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; - fsl,tmu-calibration = <0x00000000 0x00000026 - 0x00000001 0x0000002d - 0x00000002 0x00000032 - 0x00000003 0x00000039 - 0x00000004 0x0000003f - 0x00000005 0x00000046 - 0x00000006 0x0000004d - 0x00000007 0x00000054 - 0x00000008 0x0000005a - 0x00000009 0x00000061 - 0x0000000a 0x0000006a - 0x0000000b 0x00000071 - - 0x00010000 0x00000025 - 0x00010001 0x0000002c - 0x00010002 0x00000035 - 0x00010003 0x0000003d - 0x00010004 0x00000045 - 0x00010005 0x0000004e - 0x00010006 0x00000057 - 0x00010007 0x00000061 - 0x00010008 0x0000006b - 0x00010009 0x00000076 - - 0x00020000 0x00000029 - 0x00020001 0x00000033 - 0x00020002 0x0000003d - 0x00020003 0x00000049 - 0x00020004 0x00000056 - 0x00020005 0x00000061 - 0x00020006 0x0000006d - - 0x00030000 0x00000021 - 0x00030001 0x0000002a - 0x00030002 0x0000003c - 0x00030003 0x0000004e>; - little-endian; - #thermal-sensor-cells = <1>; - }; - - thermal-zones { - cpu_thermal: cpu-thermal { - polling-delay-passive = <1000>; - polling-delay = <5000>; - - thermal-sensors = <&tmu 4>; - - trips { - cpu_alert: cpu-alert { - temperature = <75000>; - hysteresis = <2000>; - type = "passive"; - }; - cpu_crit: cpu-crit { - temperature = <85000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - - cooling-maps { - map0 { - trip = <&cpu_alert>; - cooling-device = - <&cpu0 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map1 { - trip = <&cpu_alert>; - cooling-device = - <&cpu2 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map2 { - trip = <&cpu_alert>; - cooling-device = - <&cpu4 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - map3 { - trip = <&cpu_alert>; - cooling-device = - <&cpu6 THERMAL_NO_LIMIT - THERMAL_NO_LIMIT>; - }; - }; - }; - }; - - serial0: serial@21c0500 { - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0500 0x0 0x100>; - clocks = <&clockgen 4 3>; - interrupts = <0 32 0x4>; /* Level high type */ - }; - - serial1: serial@21c0600 { - compatible = "fsl,ns16550", "ns16550a"; - reg = <0x0 0x21c0600 0x0 0x100>; - clocks = <&clockgen 4 3>; - interrupts = <0 32 0x4>; /* Level high type */ - }; - - cluster1_core0_watchdog: wdt@c000000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc000000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster1_core1_watchdog: wdt@c010000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc010000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster2_core0_watchdog: wdt@c100000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc100000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster2_core1_watchdog: wdt@c110000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc110000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster3_core0_watchdog: wdt@c200000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc200000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster3_core1_watchdog: wdt@c210000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc210000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster4_core0_watchdog: wdt@c300000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc300000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - cluster4_core1_watchdog: wdt@c310000 { - compatible = "arm,sp805-wdt", "arm,primecell"; - reg = <0x0 0xc310000 0x0 0x1000>; - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "apb_pclk", "wdog_clk"; - }; - - fsl_mc: fsl-mc@80c000000 { - compatible = "fsl,qoriq-mc"; - reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ - <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ - msi-parent = <&its>; - #address-cells = <3>; - #size-cells = <1>; - - /* - * Region type 0x0 - MC portals - * Region type 0x1 - QBMAN portals - */ - ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 - 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; - - /* - * Define the maximum number of MACs present on the SoC. - */ - dpmacs { - #address-cells = <1>; - #size-cells = <0>; - - dpmac1: dpmac@1 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x1>; - }; - - dpmac2: dpmac@2 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x2>; - }; - - dpmac3: dpmac@3 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x3>; - }; - - dpmac4: dpmac@4 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x4>; - }; - - dpmac5: dpmac@5 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x5>; - }; - - dpmac6: dpmac@6 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x6>; - }; - - dpmac7: dpmac@7 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x7>; - }; - - dpmac8: dpmac@8 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x8>; - }; - - dpmac9: dpmac@9 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x9>; - }; - - dpmac10: dpmac@a { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xa>; - }; - - dpmac11: dpmac@b { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xb>; - }; - - dpmac12: dpmac@c { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xc>; - }; - - dpmac13: dpmac@d { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xd>; - }; - - dpmac14: dpmac@e { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xe>; - }; - - dpmac15: dpmac@f { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0xf>; - }; - - dpmac16: dpmac@10 { - compatible = "fsl,qoriq-mc-dpmac"; - reg = <0x10>; - }; - }; - }; - - smmu: iommu@5000000 { - compatible = "arm,mmu-500"; - reg = <0 0x5000000 0 0x800000>; - #global-interrupts = <12>; - interrupts = <0 13 4>, /* global secure fault */ - <0 14 4>, /* combined secure interrupt */ - <0 15 4>, /* global non-secure fault */ - <0 16 4>, /* combined non-secure interrupt */ - /* performance counter interrupts 0-7 */ - <0 211 4>, <0 212 4>, - <0 213 4>, <0 214 4>, - <0 215 4>, <0 216 4>, - <0 217 4>, <0 218 4>, - /* per context interrupt, 64 interrupts */ - <0 146 4>, <0 147 4>, - <0 148 4>, <0 149 4>, - <0 150 4>, <0 151 4>, - <0 152 4>, <0 153 4>, - <0 154 4>, <0 155 4>, - <0 156 4>, <0 157 4>, - <0 158 4>, <0 159 4>, - <0 160 4>, <0 161 4>, - <0 162 4>, <0 163 4>, - <0 164 4>, <0 165 4>, - <0 166 4>, <0 167 4>, - <0 168 4>, <0 169 4>, - <0 170 4>, <0 171 4>, - <0 172 4>, <0 173 4>, - <0 174 4>, <0 175 4>, - <0 176 4>, <0 177 4>, - <0 178 4>, <0 179 4>, - <0 180 4>, <0 181 4>, - <0 182 4>, <0 183 4>, - <0 184 4>, <0 185 4>, - <0 186 4>, <0 187 4>, - <0 188 4>, <0 189 4>, - <0 190 4>, <0 191 4>, - <0 192 4>, <0 193 4>, - <0 194 4>, <0 195 4>, - <0 196 4>, <0 197 4>, - <0 198 4>, <0 199 4>, - <0 200 4>, <0 201 4>, - <0 202 4>, <0 203 4>, - <0 204 4>, <0 205 4>, - <0 206 4>, <0 207 4>, - <0 208 4>, <0 209 4>; - mmu-masters = <&fsl_mc 0x300 0>; - }; - - dspi: dspi@2100000 { - status = "disabled"; - compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2100000 0x0 0x10000>; - interrupts = <0 26 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>; - clock-names = "dspi"; - spi-num-chipselects = <5>; - bus-num = <0>; - }; - - esdhc: esdhc@2140000 { - status = "disabled"; - compatible = "fsl,ls2080a-esdhc", "fsl,esdhc"; - reg = <0x0 0x2140000 0x0 0x10000>; - interrupts = <0 28 0x4>; /* Level high type */ - clock-frequency = <0>; /* Updated by bootloader */ - voltage-ranges = <1800 1800 3300 3300>; - sdhci,auto-cmd12; - little-endian; - bus-width = <4>; - }; - - gpio0: gpio@2300000 { - compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; - reg = <0x0 0x2300000 0x0 0x10000>; - interrupts = <0 36 0x4>; /* Level high type */ - gpio-controller; - little-endian; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio1: gpio@2310000 { - compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; - reg = <0x0 0x2310000 0x0 0x10000>; - interrupts = <0 36 0x4>; /* Level high type */ - gpio-controller; - little-endian; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio2: gpio@2320000 { - compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; - reg = <0x0 0x2320000 0x0 0x10000>; - interrupts = <0 37 0x4>; /* Level high type */ - gpio-controller; - little-endian; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - gpio3: gpio@2330000 { - compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; - reg = <0x0 0x2330000 0x0 0x10000>; - interrupts = <0 37 0x4>; /* Level high type */ - gpio-controller; - little-endian; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - }; - - i2c0: i2c@2000000 { - status = "disabled"; - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2000000 0x0 0x10000>; - interrupts = <0 34 0x4>; /* Level high type */ - clock-names = "i2c"; - clocks = <&clockgen 4 3>; - }; - - i2c1: i2c@2010000 { - status = "disabled"; - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2010000 0x0 0x10000>; - interrupts = <0 34 0x4>; /* Level high type */ - clock-names = "i2c"; - clocks = <&clockgen 4 3>; - }; - - i2c2: i2c@2020000 { - status = "disabled"; - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2020000 0x0 0x10000>; - interrupts = <0 35 0x4>; /* Level high type */ - clock-names = "i2c"; - clocks = <&clockgen 4 3>; - }; - - i2c3: i2c@2030000 { - status = "disabled"; - compatible = "fsl,vf610-i2c"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x2030000 0x0 0x10000>; - interrupts = <0 35 0x4>; /* Level high type */ - clock-names = "i2c"; - clocks = <&clockgen 4 3>; - }; - - ifc: ifc@2240000 { - compatible = "fsl,ifc", "simple-bus"; - reg = <0x0 0x2240000 0x0 0x20000>; - interrupts = <0 21 0x4>; /* Level high type */ - little-endian; - #address-cells = <2>; - #size-cells = <1>; - - ranges = <0 0 0x5 0x80000000 0x08000000 - 2 0 0x5 0x30000000 0x00010000 - 3 0 0x5 0x20000000 0x00010000>; - }; - - qspi: quadspi@20c0000 { - status = "disabled"; - compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x0 0x20c0000 0x0 0x10000>, - <0x0 0x20000000 0x0 0x10000000>; - reg-names = "QuadSPI", "QuadSPI-memory"; - interrupts = <0 25 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>, <&clockgen 4 3>; - clock-names = "qspi_en", "qspi"; - }; + cluster0_l2: l2-cache0 { + compatible = "cache"; + }; - pcie@3400000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", - "snps,dw-pcie"; - reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ - 0x10 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = <0 108 0x4>; /* Level high type */ - interrupt-names = "intr"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>, - <0000 0 0 2 &gic 0 0 0 110 4>, - <0000 0 0 3 &gic 0 0 0 111 4>, - <0000 0 0 4 &gic 0 0 0 112 4>; - }; + cluster1_l2: l2-cache1 { + compatible = "cache"; + }; - pcie@3500000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", - "snps,dw-pcie"; - reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ - 0x12 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = <0 113 0x4>; /* Level high type */ - interrupt-names = "intr"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>, - <0000 0 0 2 &gic 0 0 0 115 4>, - <0000 0 0 3 &gic 0 0 0 116 4>, - <0000 0 0 4 &gic 0 0 0 117 4>; - }; + cluster2_l2: l2-cache2 { + compatible = "cache"; + }; - pcie@3600000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", - "snps,dw-pcie"; - reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ - 0x14 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = <0 118 0x4>; /* Level high type */ - interrupt-names = "intr"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-lanes = <8>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>, - <0000 0 0 2 &gic 0 0 0 120 4>, - <0000 0 0 3 &gic 0 0 0 121 4>, - <0000 0 0 4 &gic 0 0 0 122 4>; - }; + cluster3_l2: l2-cache3 { + compatible = "cache"; + }; +}; - pcie@3700000 { - compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", - "snps,dw-pcie"; - reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ - 0x16 0x00000000 0x0 0x00002000>; /* configuration space */ - reg-names = "regs", "config"; - interrupts = <0 123 0x4>; /* Level high type */ - interrupt-names = "intr"; - #address-cells = <3>; - #size-cells = <2>; - device_type = "pci"; - dma-coherent; - num-lanes = <4>; - bus-range = <0x0 0xff>; - ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */ - 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ - msi-parent = <&its>; - #interrupt-cells = <1>; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>, - <0000 0 0 2 &gic 0 0 0 125 4>, - <0000 0 0 3 &gic 0 0 0 126 4>, - <0000 0 0 4 &gic 0 0 0 127 4>; - }; +&pcie1 { + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x10 0x00000000 0x0 0x00002000>; /* configuration space */ - sata0: sata@3200000 { - status = "disabled"; - compatible = "fsl,ls2080a-ahci"; - reg = <0x0 0x3200000 0x0 0x10000>; - interrupts = <0 133 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>; - dma-coherent; - }; + ranges = <0x81000000 0x0 0x00000000 0x10 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ +}; - sata1: sata@3210000 { - status = "disabled"; - compatible = "fsl,ls2080a-ahci"; - reg = <0x0 0x3210000 0x0 0x10000>; - interrupts = <0 136 0x4>; /* Level high type */ - clocks = <&clockgen 4 3>; - dma-coherent; - }; +&pcie2 { + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x12 0x00000000 0x0 0x00002000>; /* configuration space */ - usb0: usb3@3100000 { - status = "disabled"; - compatible = "snps,dwc3"; - reg = <0x0 0x3100000 0x0 0x10000>; - interrupts = <0 80 0x4>; /* Level high type */ - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - }; + ranges = <0x81000000 0x0 0x00000000 0x12 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ +}; - usb1: usb3@3110000 { - status = "disabled"; - compatible = "snps,dwc3"; - reg = <0x0 0x3110000 0x0 0x10000>; - interrupts = <0 81 0x4>; /* Level high type */ - dr_mode = "host"; - snps,quirk-frame-length-adjustment = <0x20>; - snps,dis_rxdet_inp3_quirk; - }; +&pcie3 { + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ + 0x14 0x00000000 0x0 0x00002000>; /* configuration space */ - ccn@4000000 { - compatible = "arm,ccn-504"; - reg = <0x0 0x04000000 0x0 0x01000000>; - interrupts = <0 12 4>; - }; - }; + ranges = <0x81000000 0x0 0x00000000 0x14 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ +}; - ddr1: memory-controller@1080000 { - compatible = "fsl,qoriq-memory-controller"; - reg = <0x0 0x1080000 0x0 0x1000>; - interrupts = <0 17 0x4>; - little-endian; - }; +&pcie4 { + reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ + 0x16 0x00000000 0x0 0x00002000>; /* configuration space */ - ddr2: memory-controller@1090000 { - compatible = "fsl,qoriq-memory-controller"; - reg = <0x0 0x1090000 0x0 0x1000>; - interrupts = <0 18 0x4>; - little-endian; - }; + ranges = <0x81000000 0x0 0x00000000 0x16 0x00010000 0x0 0x00010000 /* downstream I/O */ + 0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */ }; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts new file mode 100644 index 000000000000..ebcd6ee4da0d --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-qds.dts @@ -0,0 +1,64 @@ +/* + * Device Tree file for Freescale LS2088A QDS Board. + * + * Copyright (C) 2016-17, Freescale Semiconductor + * + * Abhimanyu Saini <abhimanyu.saini@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls2088a.dtsi" +#include "fsl-ls208xa-qds.dtsi" + +/ { + model = "Freescale Layerscape 2088A QDS Board"; + compatible = "fsl,ls2088a-qds", "fsl,ls2088a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts new file mode 100644 index 000000000000..5992dc130faa --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts @@ -0,0 +1,64 @@ +/* + * Device Tree file for Freescale LS2088A RDB Board. + * + * Copyright (C) 2016-17, Freescale Semiconductor + * + * Abhimanyu Saini <abhimanyu.saini@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "fsl-ls2088a.dtsi" +#include "fsl-ls208xa-rdb.dtsi" + +/ { + model = "Freescale Layerscape 2088A RDB Board"; + compatible = "fsl,ls2088a-rdb", "fsl,ls2088a"; + + aliases { + serial0 = &serial0; + serial1 = &serial1; + }; + + chosen { + stdout-path = "serial1:115200n8"; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi new file mode 100644 index 000000000000..33ce404cf7e4 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi @@ -0,0 +1,165 @@ +/* + * Device Tree Include file for Freescale Layerscape-2088A family SoC. + * + * Copyright (C) 2016-17, Freescale Semiconductor + * + * Abhimanyu Saini <abhimanyu.saini@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "fsl-ls208xa.dtsi" + +&cpu { + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x0>; + clocks = <&clockgen 1 0>; + next-level-cache = <&cluster0_l2>; + #cooling-cells = <2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x1>; + clocks = <&clockgen 1 0>; + next-level-cache = <&cluster0_l2>; + }; + + cpu2: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x100>; + clocks = <&clockgen 1 1>; + next-level-cache = <&cluster1_l2>; + #cooling-cells = <2>; + }; + + cpu3: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x101>; + clocks = <&clockgen 1 1>; + next-level-cache = <&cluster1_l2>; + }; + + cpu4: cpu@200 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x200>; + clocks = <&clockgen 1 2>; + next-level-cache = <&cluster2_l2>; + #cooling-cells = <2>; + }; + + cpu5: cpu@201 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x201>; + clocks = <&clockgen 1 2>; + next-level-cache = <&cluster2_l2>; + }; + + cpu6: cpu@300 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x300>; + clocks = <&clockgen 1 3>; + next-level-cache = <&cluster3_l2>; + #cooling-cells = <2>; + }; + + cpu7: cpu@301 { + device_type = "cpu"; + compatible = "arm,cortex-a72"; + reg = <0x301>; + clocks = <&clockgen 1 3>; + next-level-cache = <&cluster3_l2>; + }; + + cluster0_l2: l2-cache0 { + compatible = "cache"; + }; + + cluster1_l2: l2-cache1 { + compatible = "cache"; + }; + + cluster2_l2: l2-cache2 { + compatible = "cache"; + }; + + cluster3_l2: l2-cache3 { + compatible = "cache"; + }; +}; + +&pcie1 { + reg = <0x00 0x03400000 0x0 0x00100000 /* controller registers */ + 0x20 0x00000000 0x0 0x00002000>; /* configuration space */ + + ranges = <0x81000000 0x0 0x00000000 0x20 0x00010000 0x0 0x00010000 + 0x82000000 0x0 0x40000000 0x20 0x40000000 0x0 0x40000000>; +}; + +&pcie2 { + reg = <0x00 0x03500000 0x0 0x00100000 /* controller registers */ + 0x28 0x00000000 0x0 0x00002000>; /* configuration space */ + + ranges = <0x81000000 0x0 0x00000000 0x28 0x00010000 0x0 0x00010000 + 0x82000000 0x0 0x40000000 0x28 0x40000000 0x0 0x40000000>; +}; + +&pcie3 { + reg = <0x00 0x03600000 0x0 0x00100000 /* controller registers */ + 0x30 0x00000000 0x0 0x00002000>; /* configuration space */ + + ranges = <0x81000000 0x0 0x00000000 0x30 0x00010000 0x0 0x00010000 + 0x82000000 0x0 0x40000000 0x30 0x40000000 0x0 0x40000000>; +}; + +&pcie4 { + reg = <0x00 0x03700000 0x0 0x00100000 /* controller registers */ + 0x38 0x00000000 0x0 0x00002000>; /* configuration space */ + + ranges = <0x81000000 0x0 0x00000000 0x38 0x00010000 0x0 0x00010000 + 0x82000000 0x0 0x40000000 0x38 0x40000000 0x0 0x40000000>; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi new file mode 100644 index 000000000000..8b6204845973 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-qds.dtsi @@ -0,0 +1,196 @@ +/* + * Device Tree file for Freescale LS2080A QDS Board. + * + * Copyright (C) 2016-17, Freescale Semiconductor + * + * Abhimanyu Saini <abhimanyu.saini@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&esdhc { + status = "okay"; +}; + +&ifc { + status = "okay"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x5 0x80000000 0x08000000 + 0x2 0x0 0x5 0x30000000 0x00010000 + 0x3 0x0 0x5 0x20000000 0x00010000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + reg = <0x3 0x0 0x10000>; + compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; + }; +}; + +&i2c0 { + status = "okay"; + pca9547@77 { + compatible = "nxp,pca9547"; + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x00>; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7481@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +&dspi { + status = "okay"; + dflash0: n25q128a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <0>; + }; + dflash1: sst25wf040b { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <1>; + }; + dflash2: en25s64 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <2>; + }; +}; + +&qspi { + status = "okay"; + flash0: s25fl256s1@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; + flash2: s25fl256s1@2 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi new file mode 100644 index 000000000000..3737587ffb33 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa-rdb.dtsi @@ -0,0 +1,151 @@ +/* + * Device Tree file for Freescale LS2080A RDB Board. + * + * Copyright (C) 2016-17, Freescale Semiconductor + * + * Abhimanyu Saini <abhimanyu.saini@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +&esdhc { + status = "okay"; +}; + +&ifc { + status = "okay"; + #address-cells = <2>; + #size-cells = <1>; + ranges = <0x0 0x0 0x5 0x80000000 0x08000000 + 0x2 0x0 0x5 0x30000000 0x00010000 + 0x3 0x0 0x5 0x20000000 0x00010000>; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@2,0 { + compatible = "fsl,ifc-nand"; + reg = <0x2 0x0 0x10000>; + }; + + cpld@3,0 { + reg = <0x3 0x0 0x10000>; + compatible = "fsl,ls2080aqds-fpga", "fsl,fpga-qixis"; + }; + +}; + +&i2c0 { + status = "okay"; + pca9547@75 { + compatible = "nxp,pca9547"; + reg = <0x75>; + #address-cells = <1>; + #size-cells = <0>; + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x01>; + rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + adt7481@4c { + compatible = "adi,adt7461"; + reg = <0x4c>; + }; + }; + }; +}; + +&i2c1 { + status = "disabled"; +}; + +&i2c2 { + status = "disabled"; +}; + +&i2c3 { + status = "disabled"; +}; + +&dspi { + status = "okay"; + dflash0: n25q512a { + #address-cells = <1>; + #size-cells = <1>; + compatible = "st,m25p80"; + spi-max-frequency = <3000000>; + reg = <0>; + }; +}; + +&qspi { + status = "disabled"; +}; + +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + +&usb0 { + status = "okay"; +}; + +&usb1 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi new file mode 100644 index 000000000000..abb2fff7d162 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi @@ -0,0 +1,737 @@ +/* + * Device Tree Include file for Freescale Layerscape-2080A family SoC. + * + * Copyright (C) 2016-2017, Freescale Semiconductor + * + * Abhimanyu Saini <abhimanyu.saini@nxp.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPLv2 or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/thermal/thermal.h> + +/ { + compatible = "fsl,ls2080a"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpu: cpus { + #address-cells = <1>; + #size-cells = <0>; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x00000000 0x80000000 0 0x80000000>; + /* DRAM space - 1, size : 2 GB DRAM */ + }; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "sysclk"; + }; + + gic: interrupt-controller@6000000 { + compatible = "arm,gic-v3"; + reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */ + <0x0 0x06100000 0 0x100000>, /* GICR (RD_base + SGI_base) */ + <0x0 0x0c0c0000 0 0x2000>, /* GICC */ + <0x0 0x0c0d0000 0 0x1000>, /* GICH */ + <0x0 0x0c0e0000 0 0x20000>; /* GICV */ + #interrupt-cells = <3>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + interrupt-controller; + interrupts = <1 9 0x4>; + + its: gic-its@6020000 { + compatible = "arm,gic-v3-its"; + msi-controller; + reg = <0x0 0x6020000 0 0x20000>; + }; + }; + + rstcr: syscon@1e60000 { + compatible = "fsl,ls2080a-rstcr", "syscon"; + reg = <0x0 0x1e60000 0x0 0x4>; + }; + + reboot { + compatible ="syscon-reboot"; + regmap = <&rstcr>; + offset = <0x0>; + mask = <0x2>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <1 13 4>, /* Physical Secure PPI, active-low */ + <1 14 4>, /* Physical Non-Secure PPI, active-low */ + <1 11 4>, /* Virtual PPI, active-low */ + <1 10 4>; /* Hypervisor PPI, active-low */ + fsl,erratum-a008585; + }; + + pmu { + compatible = "arm,armv8-pmuv3"; + interrupts = <1 7 0x8>; /* PMU PPI, Level low type */ + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + clockgen: clocking@1300000 { + compatible = "fsl,ls2080a-clockgen"; + reg = <0 0x1300000 0 0xa0000>; + #clock-cells = <2>; + clocks = <&sysclk>; + }; + + dcfg: dcfg@1e00000 { + compatible = "fsl,ls2080a-dcfg", "syscon"; + reg = <0x0 0x1e00000 0x0 0x10000>; + little-endian; + }; + + tmu: tmu@1f80000 { + compatible = "fsl,qoriq-tmu"; + reg = <0x0 0x1f80000 0x0 0x10000>; + interrupts = <0 23 0x4>; + fsl,tmu-range = <0xb0000 0x9002a 0x6004c 0x30062>; + fsl,tmu-calibration = <0x00000000 0x00000026 + 0x00000001 0x0000002d + 0x00000002 0x00000032 + 0x00000003 0x00000039 + 0x00000004 0x0000003f + 0x00000005 0x00000046 + 0x00000006 0x0000004d + 0x00000007 0x00000054 + 0x00000008 0x0000005a + 0x00000009 0x00000061 + 0x0000000a 0x0000006a + 0x0000000b 0x00000071 + + 0x00010000 0x00000025 + 0x00010001 0x0000002c + 0x00010002 0x00000035 + 0x00010003 0x0000003d + 0x00010004 0x00000045 + 0x00010005 0x0000004e + 0x00010006 0x00000057 + 0x00010007 0x00000061 + 0x00010008 0x0000006b + 0x00010009 0x00000076 + + 0x00020000 0x00000029 + 0x00020001 0x00000033 + 0x00020002 0x0000003d + 0x00020003 0x00000049 + 0x00020004 0x00000056 + 0x00020005 0x00000061 + 0x00020006 0x0000006d + + 0x00030000 0x00000021 + 0x00030001 0x0000002a + 0x00030002 0x0000003c + 0x00030003 0x0000004e>; + little-endian; + #thermal-sensor-cells = <1>; + }; + + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + thermal-sensors = <&tmu 4>; + + trips { + cpu_alert: cpu-alert { + temperature = <75000>; + hysteresis = <2000>; + type = "passive"; + }; + cpu_crit: cpu-crit { + temperature = <85000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu_alert>; + cooling-device = + <&cpu0 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_alert>; + cooling-device = + <&cpu2 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map2 { + trip = <&cpu_alert>; + cooling-device = + <&cpu4 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + map3 { + trip = <&cpu_alert>; + cooling-device = + <&cpu6 THERMAL_NO_LIMIT + THERMAL_NO_LIMIT>; + }; + }; + }; + }; + + serial0: serial@21c0500 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 0x4>; /* Level high type */ + }; + + serial1: serial@21c0600 { + compatible = "fsl,ns16550", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + clocks = <&clockgen 4 3>; + interrupts = <0 32 0x4>; /* Level high type */ + }; + + cluster1_core0_watchdog: wdt@c000000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc000000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster1_core1_watchdog: wdt@c010000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc010000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core0_watchdog: wdt@c100000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc100000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster2_core1_watchdog: wdt@c110000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc110000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster3_core0_watchdog: wdt@c200000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc200000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster3_core1_watchdog: wdt@c210000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc210000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster4_core0_watchdog: wdt@c300000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc300000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + cluster4_core1_watchdog: wdt@c310000 { + compatible = "arm,sp805-wdt", "arm,primecell"; + reg = <0x0 0xc310000 0x0 0x1000>; + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "apb_pclk", "wdog_clk"; + }; + + fsl_mc: fsl-mc@80c000000 { + compatible = "fsl,qoriq-mc"; + reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */ + <0x00000000 0x08340000 0 0x40000>; /* MC control reg */ + msi-parent = <&its>; + #address-cells = <3>; + #size-cells = <1>; + + /* + * Region type 0x0 - MC portals + * Region type 0x1 - QBMAN portals + */ + ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000 + 0x1 0x0 0x0 0x8 0x18000000 0x8000000>; + + /* + * Define the maximum number of MACs present on the SoC. + */ + dpmacs { + #address-cells = <1>; + #size-cells = <0>; + + dpmac1: dpmac@1 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x1>; + }; + + dpmac2: dpmac@2 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x2>; + }; + + dpmac3: dpmac@3 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x3>; + }; + + dpmac4: dpmac@4 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x4>; + }; + + dpmac5: dpmac@5 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x5>; + }; + + dpmac6: dpmac@6 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x6>; + }; + + dpmac7: dpmac@7 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x7>; + }; + + dpmac8: dpmac@8 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x8>; + }; + + dpmac9: dpmac@9 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x9>; + }; + + dpmac10: dpmac@a { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xa>; + }; + + dpmac11: dpmac@b { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xb>; + }; + + dpmac12: dpmac@c { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xc>; + }; + + dpmac13: dpmac@d { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xd>; + }; + + dpmac14: dpmac@e { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xe>; + }; + + dpmac15: dpmac@f { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0xf>; + }; + + dpmac16: dpmac@10 { + compatible = "fsl,qoriq-mc-dpmac"; + reg = <0x10>; + }; + }; + }; + + smmu: iommu@5000000 { + compatible = "arm,mmu-500"; + reg = <0 0x5000000 0 0x800000>; + #global-interrupts = <12>; + interrupts = <0 13 4>, /* global secure fault */ + <0 14 4>, /* combined secure interrupt */ + <0 15 4>, /* global non-secure fault */ + <0 16 4>, /* combined non-secure interrupt */ + /* performance counter interrupts 0-7 */ + <0 211 4>, <0 212 4>, + <0 213 4>, <0 214 4>, + <0 215 4>, <0 216 4>, + <0 217 4>, <0 218 4>, + /* per context interrupt, 64 interrupts */ + <0 146 4>, <0 147 4>, + <0 148 4>, <0 149 4>, + <0 150 4>, <0 151 4>, + <0 152 4>, <0 153 4>, + <0 154 4>, <0 155 4>, + <0 156 4>, <0 157 4>, + <0 158 4>, <0 159 4>, + <0 160 4>, <0 161 4>, + <0 162 4>, <0 163 4>, + <0 164 4>, <0 165 4>, + <0 166 4>, <0 167 4>, + <0 168 4>, <0 169 4>, + <0 170 4>, <0 171 4>, + <0 172 4>, <0 173 4>, + <0 174 4>, <0 175 4>, + <0 176 4>, <0 177 4>, + <0 178 4>, <0 179 4>, + <0 180 4>, <0 181 4>, + <0 182 4>, <0 183 4>, + <0 184 4>, <0 185 4>, + <0 186 4>, <0 187 4>, + <0 188 4>, <0 189 4>, + <0 190 4>, <0 191 4>, + <0 192 4>, <0 193 4>, + <0 194 4>, <0 195 4>, + <0 196 4>, <0 197 4>, + <0 198 4>, <0 199 4>, + <0 200 4>, <0 201 4>, + <0 202 4>, <0 203 4>, + <0 204 4>, <0 205 4>, + <0 206 4>, <0 207 4>, + <0 208 4>, <0 209 4>; + mmu-masters = <&fsl_mc 0x300 0>; + }; + + dspi: dspi@2100000 { + status = "disabled"; + compatible = "fsl,ls2080a-dspi", "fsl,ls2085a-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <0 26 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + bus-num = <0>; + }; + + esdhc: esdhc@2140000 { + status = "disabled"; + compatible = "fsl,ls2080a-esdhc", "fsl,esdhc"; + reg = <0x0 0x2140000 0x0 0x10000>; + interrupts = <0 28 0x4>; /* Level high type */ + clock-frequency = <0>; /* Updated by bootloader */ + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + little-endian; + bus-width = <4>; + }; + + gpio0: gpio@2300000 { + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2300000 0x0 0x10000>; + interrupts = <0 36 0x4>; /* Level high type */ + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio@2310000 { + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2310000 0x0 0x10000>; + interrupts = <0 36 0x4>; /* Level high type */ + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@2320000 { + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2320000 0x0 0x10000>; + interrupts = <0 37 0x4>; /* Level high type */ + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@2330000 { + compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio"; + reg = <0x0 0x2330000 0x0 0x10000>; + interrupts = <0 37 0x4>; /* Level high type */ + gpio-controller; + little-endian; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + i2c0: i2c@2000000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2000000 0x0 0x10000>; + interrupts = <0 34 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + i2c1: i2c@2010000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2010000 0x0 0x10000>; + interrupts = <0 34 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + i2c2: i2c@2020000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2020000 0x0 0x10000>; + interrupts = <0 35 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + i2c3: i2c@2030000 { + status = "disabled"; + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2030000 0x0 0x10000>; + interrupts = <0 35 0x4>; /* Level high type */ + clock-names = "i2c"; + clocks = <&clockgen 4 3>; + }; + + ifc: ifc@2240000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x2240000 0x0 0x20000>; + interrupts = <0 21 0x4>; /* Level high type */ + little-endian; + #address-cells = <2>; + #size-cells = <1>; + + ranges = <0 0 0x5 0x80000000 0x08000000 + 2 0 0x5 0x30000000 0x00010000 + 3 0 0x5 0x20000000 0x00010000>; + }; + + qspi: quadspi@20c0000 { + status = "disabled"; + compatible = "fsl,ls2080a-qspi", "fsl,ls1021a-qspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x20c0000 0x0 0x10000>, + <0x0 0x20000000 0x0 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = <0 25 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>, <&clockgen 4 3>; + clock-names = "qspi_en", "qspi"; + }; + + pcie1: pcie@3400000 { + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", + "snps,dw-pcie"; + reg-names = "regs", "config"; + interrupts = <0 108 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <4>; + bus-range = <0x0 0xff>; + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 109 4>, + <0000 0 0 2 &gic 0 0 0 110 4>, + <0000 0 0 3 &gic 0 0 0 111 4>, + <0000 0 0 4 &gic 0 0 0 112 4>; + }; + + pcie2: pcie@3500000 { + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", + "snps,dw-pcie"; + reg-names = "regs", "config"; + interrupts = <0 113 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <4>; + bus-range = <0x0 0xff>; + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 114 4>, + <0000 0 0 2 &gic 0 0 0 115 4>, + <0000 0 0 3 &gic 0 0 0 116 4>, + <0000 0 0 4 &gic 0 0 0 117 4>; + }; + + pcie3: pcie@3600000 { + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", + "snps,dw-pcie"; + reg-names = "regs", "config"; + interrupts = <0 118 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <8>; + bus-range = <0x0 0xff>; + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 119 4>, + <0000 0 0 2 &gic 0 0 0 120 4>, + <0000 0 0 3 &gic 0 0 0 121 4>, + <0000 0 0 4 &gic 0 0 0 122 4>; + }; + + pcie4: pcie@3700000 { + compatible = "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", + "snps,dw-pcie"; + reg-names = "regs", "config"; + interrupts = <0 123 0x4>; /* Level high type */ + interrupt-names = "intr"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + dma-coherent; + num-lanes = <4>; + bus-range = <0x0 0xff>; + msi-parent = <&its>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0000 0 0 1 &gic 0 0 0 124 4>, + <0000 0 0 2 &gic 0 0 0 125 4>, + <0000 0 0 3 &gic 0 0 0 126 4>, + <0000 0 0 4 &gic 0 0 0 127 4>; + }; + + sata0: sata@3200000 { + status = "disabled"; + compatible = "fsl,ls2080a-ahci"; + reg = <0x0 0x3200000 0x0 0x10000>; + interrupts = <0 133 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>; + dma-coherent; + }; + + sata1: sata@3210000 { + status = "disabled"; + compatible = "fsl,ls2080a-ahci"; + reg = <0x0 0x3210000 0x0 0x10000>; + interrupts = <0 136 0x4>; /* Level high type */ + clocks = <&clockgen 4 3>; + dma-coherent; + }; + + usb0: usb3@3100000 { + status = "disabled"; + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <0 80 0x4>; /* Level high type */ + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + }; + + usb1: usb3@3110000 { + status = "disabled"; + compatible = "snps,dwc3"; + reg = <0x0 0x3110000 0x0 0x10000>; + interrupts = <0 81 0x4>; /* Level high type */ + dr_mode = "host"; + snps,quirk-frame-length-adjustment = <0x20>; + snps,dis_rxdet_inp3_quirk; + }; + + ccn@4000000 { + compatible = "arm,ccn-504"; + reg = <0x0 0x04000000 0x0 0x01000000>; + interrupts = <0 12 4>; + }; + }; + + ddr1: memory-controller@1080000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1080000 0x0 0x1000>; + interrupts = <0 17 0x4>; + little-endian; + }; + + ddr2: memory-controller@1090000 { + compatible = "fsl,qoriq-memory-controller"; + reg = <0x0 0x1090000 0x0 0x1000>; + interrupts = <0 18 0x4>; + little-endian; + }; +}; diff --git a/arch/arm64/boot/dts/include/arm b/arch/arm64/boot/dts/include/arm new file mode 120000 index 000000000000..cf63d80e2b93 --- /dev/null +++ b/arch/arm64/boot/dts/include/arm @@ -0,0 +1 @@ +../../../../arm/boot/dts
\ No newline at end of file diff --git a/arch/arm64/boot/dts/include/arm64 b/arch/arm64/boot/dts/include/arm64 new file mode 120000 index 000000000000..a96aa0ea9d8c --- /dev/null +++ b/arch/arm64/boot/dts/include/arm64 @@ -0,0 +1 @@ +..
\ No newline at end of file diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 86602c907a61..2a6eef2d4d66 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -46,6 +46,7 @@ /dts-v1/; +#include <dt-bindings/gpio/gpio.h> #include "armada-372x.dtsi" / { @@ -60,10 +61,49 @@ device_type = "memory"; reg = <0x00000000 0x00000000 0x00000000 0x20000000>; }; + + exp_usb3_vbus: usb3-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb3-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + gpio = <&gpio_exp 1 GPIO_ACTIVE_HIGH>; + }; + + usb3_phy: usb3-phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <&exp_usb3_vbus>; + }; }; &i2c0 { status = "okay"; + + gpio_exp: pca9555@22 { + compatible = "nxp,pca9555"; + gpio-controller; + #gpio-cells = <2>; + + reg = <0x22>; + /* + * IO0_0: PWR_EN_USB2 IO1_0: PWR_EN_VTT + * IO0_1: PWR_EN_USB23 IO1_1: MPCIE_WDISABLE + * IO0_2: PWR_EN_SATA IO1_2: RGMII_DEV_RSTN + * IO0_3: PWR_EN_PCIE IO1_3: SGMII_DEV_RSTN + * IO0_4: PWR_EN_SD + * IO0_5: PWR_EN_EMMC + * IO0_6: PWR_EN_RGMII IO1_6: SATA_USB3.0_SEL + * IO0_7: PWR_EN_SGMII IO1_7: PWR_MCI_PS + */ + }; + + rtc@68 { + /* PT7C4337A from pericom fully compatible with the ds1337 */ + compatible = "dallas,ds1337"; + reg = <0x68>; + }; }; /* CON3 */ @@ -109,6 +149,7 @@ /* CON31 */ &usb3 { status = "okay"; + usb-phy = <&usb3_phy>; }; /* CON17 (PCIe) / CON12 (mini-PCIe) */ diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index b48d668a6ab6..2a4e8dbe33aa 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -112,6 +112,8 @@ i2c0: i2c@11000 { compatible = "marvell,armada-3700-i2c"; reg = <0x11000 0x24>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&nb_periph_clk 10>; interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; mrvl,i2c-fast-mode; @@ -121,6 +123,8 @@ i2c1: i2c@11080 { compatible = "marvell,armada-3700-i2c"; reg = <0x11080 0x24>; + #address-cells = <1>; + #size-cells = <0>; clocks = <&nb_periph_clk 9>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; mrvl,i2c-fast-mode; @@ -196,7 +200,8 @@ compatible = "marvell,armada3700-xhci", "generic-xhci"; reg = <0x58000 0x4000>; - interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sb_periph_clk 12>; status = "disabled"; }; diff --git a/arch/arm64/boot/dts/marvell/armada-7040-db.dts b/arch/arm64/boot/dts/marvell/armada-7040-db.dts index 070b589680c5..bb0e1e8e7138 100644 --- a/arch/arm64/boot/dts/marvell/armada-7040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-7040-db.dts @@ -146,3 +146,28 @@ &cpm_usb3_1 { status = "okay"; }; + +&cpm_mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cpm_ethernet { + status = "okay"; +}; + +&cpm_eth1 { + status = "okay"; + phy = <&phy0>; + phy-mode = "sgmii"; +}; + +&cpm_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8020.dtsi b/arch/arm64/boot/dts/marvell/armada-8020.dtsi index 048e5cf5160e..7c08f1f28d9e 100644 --- a/arch/arm64/boot/dts/marvell/armada-8020.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8020.dtsi @@ -54,3 +54,13 @@ compatible = "marvell,armada8020", "marvell,armada-ap806-dual", "marvell,armada-ap806"; }; + +/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock + * in CP master is not connected (by package) to the oscillator. So + * disable it. However, the RTC clock in CP slave is connected to the + * oscillator so this one is let enabled. + */ + +&cpm_rtc { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-8040-db.dts b/arch/arm64/boot/dts/marvell/armada-8040-db.dts index 6e6f182fb297..80e685e4235d 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-8040-db.dts @@ -124,6 +124,22 @@ status = "okay"; }; +&cpm_mdio { + phy1: ethernet-phy@1 { + reg = <1>; + }; +}; + +&cpm_ethernet { + status = "okay"; +}; + +&cpm_eth2 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; +}; + /* CON5 on CP1 expansion */ &cps_pcie2 { status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-8040.dtsi b/arch/arm64/boot/dts/marvell/armada-8040.dtsi index 9c1b28c47683..33813a75bc30 100644 --- a/arch/arm64/boot/dts/marvell/armada-8040.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-8040.dtsi @@ -54,3 +54,12 @@ compatible = "marvell,armada8040", "marvell,armada-ap806-quad", "marvell,armada-ap806"; }; + +/* The RTC requires external oscillator. But on Aramda 80x0, the RTC clock + * in CP master is not connected (by package) to the oscillator. So + * disable it. However, the RTC clock in CP slave is connected to the + * oscillator so this one is let enabled. + */ +&cpm_rtc { + status = "disabled"; +}; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index 3a99c36433d6..a035f5955282 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -59,6 +59,43 @@ interrupt-parent = <&gic>; ranges = <0x0 0x0 0xf2000000 0x2000000>; + cpm_ethernet: ethernet@0 { + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>; + clocks = <&cpm_syscon0 1 3>, <&cpm_syscon0 1 9>, <&cpm_syscon0 1 5>; + clock-names = "pp_clk", "gop_clk", "mg_clk"; + status = "disabled"; + dma-coherent; + + cpm_eth0: eth0 { + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + port-id = <0>; + gop-port-id = <0>; + status = "disabled"; + }; + + cpm_eth1: eth1 { + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + port-id = <1>; + gop-port-id = <2>; + status = "disabled"; + }; + + cpm_eth2: eth2 { + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + port-id = <2>; + gop-port-id = <3>; + status = "disabled"; + }; + }; + + cpm_mdio: mdio@12a200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a200 0x10>; + }; + cpm_syscon0: system-controller@440000 { compatible = "marvell,cp110-system-controller0", "syscon"; @@ -79,6 +116,13 @@ "cpm-usb3dev", "cpm-eip150", "cpm-eip197"; }; + cpm_rtc: rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + }; + cpm_sata0: sata@540000 { compatible = "marvell,armada-8k-ahci", "generic-ahci"; diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi index 9e09c4d3b6bd..fb9141ab9b37 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi @@ -59,6 +59,50 @@ interrupt-parent = <&gic>; ranges = <0x0 0x0 0xf4000000 0x2000000>; + cps_rtc: rtc@284000 { + compatible = "marvell,armada-8k-rtc"; + reg = <0x284000 0x20>, <0x284080 0x24>; + reg-names = "rtc", "rtc-soc"; + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + }; + + cps_ethernet: ethernet@0 { + compatible = "marvell,armada-7k-pp22"; + reg = <0x0 0x100000>, <0x129000 0xb000>; + clocks = <&cps_syscon0 1 3>, <&cps_syscon0 1 9>, <&cps_syscon0 1 5>; + clock-names = "pp_clk", "gop_clk", "mg_clk"; + status = "disabled"; + dma-coherent; + + cps_eth0: eth0 { + interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>; + port-id = <0>; + gop-port-id = <0>; + status = "disabled"; + }; + + cps_eth1: eth1 { + interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; + port-id = <1>; + gop-port-id = <2>; + status = "disabled"; + }; + + cps_eth2: eth2 { + interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; + port-id = <2>; + gop-port-id = <3>; + status = "disabled"; + }; + }; + + cps_mdio: mdio@12a200 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x12a200 0x10>; + }; + cps_syscon0: system-controller@440000 { compatible = "marvell,cp110-system-controller0", "syscon"; diff --git a/arch/arm64/boot/dts/nvidia/tegra132.dtsi b/arch/arm64/boot/dts/nvidia/tegra132.dtsi index 3f3a46a4bd01..2b17936ac5be 100644 --- a/arch/arm64/boot/dts/nvidia/tegra132.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra132.dtsi @@ -224,7 +224,7 @@ }; flow-controller@60007000 { - compatible = "nvidia,tegra124-flowctrl"; + compatible = "nvidia,tegra132-flowctrl", "nvidia,tegra124-flowctrl"; reg = <0x0 0x60007000 0x0 0x1000>; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts index 0d3c0996d832..8daadadec63a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts +++ b/arch/arm64/boot/dts/nvidia/tegra186-p2771-0000.dts @@ -1,8 +1,99 @@ /dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> + #include "tegra186-p3310.dtsi" / { model = "NVIDIA Tegra186 P2771-0000 Development Board"; compatible = "nvidia,p2771-0000", "nvidia,tegra186"; + + i2c@3160000 { + power-monitor@42 { + compatible = "ti,ina3221"; + reg = <0x42>; + }; + + power-monitor@43 { + compatible = "ti,ina3221"; + reg = <0x43>; + }; + + exp1: gpio@74 { + compatible = "ti,tca9539"; + reg = <0x74>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_MAIN_GPIO(Y, 0) GPIO_ACTIVE_LOW>; + + #gpio-cells = <2>; + gpio-controller; + }; + + exp2: gpio@77 { + compatible = "ti,tca9539"; + reg = <0x77>; + + interrupt-parent = <&gpio>; + interrupts = <TEGRA_MAIN_GPIO(Y, 6) GPIO_ACTIVE_LOW>; + + #gpio-cells = <2>; + gpio-controller; + }; + }; + + /* SDMMC1 (SD/MMC) */ + sdhci@3400000 { + status = "okay"; + + vmmc-supply = <&vdd_sd>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 0) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + wakeup-source; + }; + + volume-up { + label = "Volume Up"; + gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 1) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <10>; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio_aon TEGRA_AON_GPIO(FF, 2) + GPIO_ACTIVE_LOW>; + linux,input-type = <EV_KEY>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <10>; + }; + }; + + regulators { + vdd_sd: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + + regulator-name = "SD_CARD_SW_PWR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&gpio TEGRA_MAIN_GPIO(P, 6) GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_3v3_sys>; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi index 1abe2eceb3d1..cf84d7046ad5 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186-p3310.dtsi @@ -1,11 +1,23 @@ #include "tegra186.dtsi" +#include <dt-bindings/mfd/max77620.h> + / { model = "NVIDIA Tegra186 P3310 Processor Module"; compatible = "nvidia,p3310", "nvidia,tegra186"; aliases { + sdhci0 = "/sdhci@3460000"; + sdhci1 = "/sdhci@3400000"; serial0 = &uarta; + i2c0 = "/bpmp/i2c"; + i2c1 = "/i2c@3160000"; + i2c2 = "/i2c@c240000"; + i2c3 = "/i2c@3180000"; + i2c4 = "/i2c@3190000"; + i2c5 = "/i2c@31c0000"; + i2c6 = "/i2c@c250000"; + i2c7 = "/i2c@31e0000"; }; chosen { @@ -18,14 +30,99 @@ reg = <0x0 0x80000000 0x2 0x00000000>; }; + ethernet@2490000 { + status = "okay"; + + phy-reset-gpios = <&gpio TEGRA_MAIN_GPIO(M, 4) GPIO_ACTIVE_LOW>; + phy-handle = <&phy>; + phy-mode = "rgmii"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + phy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0x0>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_MAIN_GPIO(M, 5) IRQ_TYPE_LEVEL_HIGH>; + }; + }; + }; + serial@3100000 { status = "okay"; }; + i2c@3160000 { + status = "okay"; + + power-monitor@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + }; + + power-monitor@41 { + compatible = "ti,ina3221"; + reg = <0x41>; + }; + }; + + i2c@3180000 { + status = "okay"; + }; + + i2c@3190000 { + status = "okay"; + }; + + i2c@31c0000 { + status = "okay"; + }; + + i2c@31e0000 { + status = "okay"; + }; + + /* SDMMC1 (SD/MMC) */ + sdhci@3400000 { + cd-gpios = <&gpio TEGRA_MAIN_GPIO(P, 5) GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio TEGRA_MAIN_GPIO(P, 4) GPIO_ACTIVE_LOW>; + + vqmmc-supply = <&vddio_sdmmc1>; + }; + + /* SDMMC3 (SDIO) */ + sdhci@3440000 { + status = "okay"; + }; + + /* SDMMC4 (eMMC) */ + sdhci@3460000 { + status = "okay"; + bus-width = <8>; + non-removable; + + vqmmc-supply = <&vdd_1v8_ap>; + vmmc-supply = <&vdd_3v3_sys>; + }; + hsp@3c00000 { status = "okay"; }; + i2c@c240000 { + status = "okay"; + }; + + i2c@c250000 { + status = "okay"; + }; + + pmc@c360000 { + nvidia,invert-interrupt; + }; + cpus { cpu@0 { enable-method = "psci"; @@ -53,7 +150,192 @@ }; bpmp { - status = "okay"; + i2c { + status = "okay"; + + pmic: pmic@3c { + compatible = "maxim,max77620"; + reg = <0x3c>; + + interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <2>; + interrupt-controller; + + #gpio-cells = <2>; + gpio-controller; + + pinctrl-names = "default"; + pinctrl-0 = <&max77620_default>; + + max77620_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + }; + + gpio1 { + pins = "gpio1"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_0>; + }; + + gpio2 { + pins = "gpio2"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + + gpio3 { + pins = "gpio3"; + function = "fps-out"; + maxim,active-fps-source = <MAX77620_FPS_SRC_1>; + }; + + gpio4 { + pins = "gpio4"; + function = "32k-out1"; + drive-push-pull = <1>; + }; + + gpio5 { + pins = "gpio5"; + function = "gpio"; + drive-push-pull = <0>; + }; + + gpio6 { + pins = "gpio6"; + function = "gpio"; + drive-push-pull = <1>; + }; + + gpio7 { + pins = "gpio7"; + function = "gpio"; + drive-push-pull = <0>; + }; + }; + + fps { + fps0 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps1 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN1>; + maxim,shutdown-fps-time-period-us = <640>; + }; + + fps2 { + maxim,fps-event-source = <MAX77620_FPS_EVENT_SRC_EN0>; + maxim,shutdown-fps-time-period-us = <640>; + }; + }; + + regulators { + in-sd0-supply = <&vdd_5v0_sys>; + in-sd1-supply = <&vdd_5v0_sys>; + in-sd2-supply = <&vdd_5v0_sys>; + in-sd3-supply = <&vdd_5v0_sys>; + + in-ldo0-1-supply = <&vdd_5v0_sys>; + in-ldo2-supply = <&vdd_5v0_sys>; + in-ldo3-5-supply = <&vdd_5v0_sys>; + in-ldo4-6-supply = <&vdd_1v8>; + in-ldo7-8-supply = <&avdd_dsi_csi>; + + sd0 { + regulator-name = "VDD_DDR_1V1_PMIC"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + avdd_dsi_csi: sd1 { + regulator-name = "AVDD_DSI_CSI_1V2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8: sd2 { + regulator-name = "VDD_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + + vdd_3v3_sys: sd3 { + regulator-name = "VDD_3V3_SYS"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + + ldo0 { + regulator-name = "VDD_1V8_AP_PLL"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + + ldo2 { + regulator-name = "VDDIO_3V3_AOHV"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + + vddio_sdmmc1: ldo3 { + regulator-name = "VDDIO_SDMMC1_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4 { + regulator-name = "VDD_RTC"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + vddio_sdmmc3: ldo5 { + regulator-name = "VDDIO_SDMMC3_AP"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + avdd_1v05: ldo7 { + regulator-name = "VDD_HDMI_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + + vdd_pex: ldo8 { + regulator-name = "VDD_PEX_1V05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + /* XXX */ + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; }; psci { @@ -61,4 +343,39 @@ status = "okay"; method = "smc"; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_sys: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + + regulator-name = "VDD_5V0_SYS"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + vdd_1v8_ap: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + + regulator-name = "VDD_1V8_AP"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + /* XXX */ + regulator-always-on; + regulator-boot-on; + + gpio = <&pmic 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + vin-supply = <&vdd_1v8>; + }; + }; }; diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi index 62fa85ae0271..5e62e68ac053 100644 --- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi @@ -2,6 +2,7 @@ #include <dt-bindings/gpio/tegra186-gpio.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/mailbox/tegra186-hsp.h> +#include <dt-bindings/power/tegra186-powergate.h> #include <dt-bindings/reset/tegra186-reset.h> / { @@ -27,6 +28,37 @@ gpio-controller; }; + ethernet@2490000 { + compatible = "nvidia,tegra186-eqos", + "snps,dwc-qos-ethernet-4.10"; + reg = <0x0 0x02490000 0x0 0x10000>; + interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, /* common */ + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, /* power */ + <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>, /* rx0 */ + <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>, /* tx0 */ + <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>, /* rx1 */ + <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>, /* tx1 */ + <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, /* rx2 */ + <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>, /* tx2 */ + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, /* rx3 */ + <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>; /* tx3 */ + clocks = <&bpmp TEGRA186_CLK_AXI_CBB>, + <&bpmp TEGRA186_CLK_EQOS_AXI>, + <&bpmp TEGRA186_CLK_EQOS_RX>, + <&bpmp TEGRA186_CLK_EQOS_TX>, + <&bpmp TEGRA186_CLK_EQOS_PTP_REF>; + clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref"; + resets = <&bpmp TEGRA186_RESET_EQOS>; + reset-names = "eqos"; + status = "disabled"; + + snps,write-requests = <1>; + snps,read-requests = <3>; + snps,burst-map = <0x7>; + snps,txpbl = <32>; + snps,rxpbl = <8>; + }; + uarta: serial@3100000 { compatible = "nvidia,tegra186-uart", "nvidia,tegra20-uart"; reg = <0x0 0x03100000 0x0 0x40>; @@ -307,6 +339,33 @@ #interrupt-cells = <2>; }; + pmc@c360000 { + compatible = "nvidia,tegra186-pmc"; + reg = <0 0x0c360000 0 0x10000>, + <0 0x0c370000 0 0x10000>, + <0 0x0c380000 0 0x10000>, + <0 0x0c390000 0 0x10000>; + reg-names = "pmc", "wake", "aotag", "scratch"; + }; + + gpu@17000000 { + compatible = "nvidia,gp10b"; + reg = <0x0 0x17000000 0x0 0x1000000>, + <0x0 0x18000000 0x0 0x1000000>; + interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH + GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "stall", "nonstall"; + + clocks = <&bpmp TEGRA186_CLK_GPCCLK>, + <&bpmp TEGRA186_CLK_GPU>; + clock-names = "gpu", "pwr"; + resets = <&bpmp TEGRA186_RESET_GPU>; + reset-names = "gpu"; + status = "disabled"; + + power-domains = <&bpmp TEGRA186_POWER_DOMAIN_GPU>; + }; + sysram@30000000 { compatible = "nvidia,tegra186-sysram", "mmio-sram"; reg = <0x0 0x30000000 0x0 0x50000>; diff --git a/arch/arm64/boot/dts/nvidia/tegra210.dtsi b/arch/arm64/boot/dts/nvidia/tegra210.dtsi index 2f832df29da8..8f26c4d4409a 100644 --- a/arch/arm64/boot/dts/nvidia/tegra210.dtsi +++ b/arch/arm64/boot/dts/nvidia/tegra210.dtsi @@ -89,6 +89,8 @@ ranges = <0x0 0x54000000 0x0 0x54000000 0x0 0x01000000>; + iommus = <&mc TEGRA_SWGROUP_HC>; + dpaux1: dpaux@54040000 { compatible = "nvidia,tegra210-dpaux"; reg = <0x0 0x54040000 0x0 0x00040000>; @@ -185,7 +187,14 @@ vic@54340000 { compatible = "nvidia,tegra210-vic"; reg = <0x0 0x54340000 0x0 0x00040000>; - status = "disabled"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA210_CLK_VIC03>; + clock-names = "vic"; + resets = <&tegra_car 178>; + reset-names = "vic"; + + iommus = <&mc TEGRA_SWGROUP_VIC>; + power-domains = <&pd_vic>; }; nvjpg@54380000 { @@ -755,6 +764,14 @@ resets = <&tegra_car TEGRA210_CLK_XUSB_HOST>; #power-domain-cells = <0>; }; + + pd_vic: vic { + clocks = <&tegra_car TEGRA210_CLK_VIC03>; + clock-names = "vic"; + resets = <&tegra_car 178>; + reset-names = "vic"; + #power-domain-cells = <0>; + }; }; }; diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi index eac5389f2f38..a17f5b9a5de6 100644 --- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi +++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi @@ -35,6 +35,17 @@ stdout-path = "serial0"; }; + reserved-memory { + ramoops@bff00000{ + compatible = "ramoops"; + reg = <0x0 0xbff00000 0x0 0x100000>; + + record-size = <0x20000>; + console-size = <0x20000>; + ftrace-size = <0x20000>; + }; + }; + soc { dma@7884000 { status = "okay"; diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi index 68a8e67cba29..ab3093995ded 100644 --- a/arch/arm64/boot/dts/qcom/msm8916.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi @@ -157,7 +157,7 @@ }; pmu { - compatible = "arm,armv8-pmuv3"; + compatible = "arm,cortex-a53-pmu"; interrupts = <GIC_PPI 7 GIC_CPU_MASK_SIMPLE(4)>; }; @@ -833,8 +833,9 @@ clocks = <&gcc GCC_MSS_CFG_AHB_CLK>, <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>, - <&gcc GCC_BOOT_ROM_AHB_CLK>; - clock-names = "iface", "bus", "mem"; + <&gcc GCC_BOOT_ROM_AHB_CLK>, + <&xo_board>; + clock-names = "iface", "bus", "mem", "xo"; qcom,smem-states = <&hexagon_smp2p_out 0>; qcom,smem-state-names = "stop"; @@ -842,6 +843,7 @@ resets = <&scm 0>; reset-names = "mss_restart"; + cx-supply = <&pm8916_s1>; mx-supply = <&pm8916_l3>; pll-supply = <&pm8916_l7>; @@ -856,6 +858,16 @@ mpss { memory-region = <&mpss_mem>; }; + + smd-edge { + interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; + + qcom,smd-edge = <0>; + qcom,ipc = <&apcs 8 12>; + qcom,remote-pid = <1>; + + label = "hexagon"; + }; }; pronto: wcnss@a21b000 { @@ -1214,14 +1226,6 @@ }; }; }; - - hexagon { - interrupts = <0 25 IRQ_TYPE_EDGE_RISING>; - - qcom,smd-edge = <0>; - qcom,ipc = <&apcs 8 12>; - qcom,remote-pid = <1>; - }; }; hexagon-smp2p { diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi index ed7223d3c8cb..9bc9c857a000 100644 --- a/arch/arm64/boot/dts/qcom/msm8996.dtsi +++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi @@ -534,6 +534,26 @@ }; }; + adsp-pil { + compatible = "qcom,msm8996-adsp-pil"; + + interrupts-extended = <&intc 0 162 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&xo_board>; + clock-names = "xo"; + + memory-region = <&adsp_region>; + + qcom,smem-states = <&adsp_smp2p_out 0>; + qcom,smem-state-names = "stop"; + }; + adsp-smp2p { compatible = "qcom,smp2p"; qcom,smem = <443>, <429>; @@ -547,7 +567,7 @@ adsp_smp2p_out: master-kernel { qcom,entry-name = "master-kernel"; - #qcom,state-cells = <1>; + #qcom,smem-state-cells = <1>; }; adsp_smp2p_in: slave-kernel { @@ -557,5 +577,29 @@ #interrupt-cells = <2>; }; }; + + smp2p-slpi { + compatible = "qcom,smp2p"; + qcom,smem = <481>, <430>; + + interrupts = <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>; + + qcom,ipc = <&apcs 16 26>; + + qcom,local-pid = <0>; + qcom,remote-pid = <3>; + + slpi_smp2p_in: slave-kernel { + qcom,entry-name = "slave-kernel"; + interrupt-controller; + #interrupt-cells = <2>; + }; + + slpi_smp2p_out: master-kernel { + qcom,entry-name = "master-kernel"; + #qcom,smem-state-cells = <1>; + }; + }; + }; #include "msm8996-pins.dtsi" diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi index 0f1866024ae3..b413e44fd09e 100644 --- a/arch/arm64/boot/dts/qcom/pm8994.dtsi +++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi @@ -9,6 +9,13 @@ #address-cells = <1>; #size-cells = <0>; + rtc@6000 { + compatible = "qcom,pm8941-rtc"; + reg = <0x6000>, <0x6100>; + reg-names = "rtc", "alarm"; + interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; + }; + pm8994_gpios: gpios@c000 { compatible = "qcom,pm8994-gpio"; reg = <0xc000>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts index c5f8f69a4f5f..ab352159de65 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts @@ -33,6 +33,21 @@ reg = <0x0 0x48000000 0x0 0x38000000>; }; + memory@500000000 { + device_type = "memory"; + reg = <0x5 0x00000000 0x0 0x40000000>; + }; + + memory@600000000 { + device_type = "memory"; + reg = <0x6 0x00000000 0x0 0x40000000>; + }; + + memory@700000000 { + device_type = "memory"; + reg = <0x7 0x00000000 0x0 0x40000000>; + }; + leds { compatible = "gpio-leds"; @@ -213,7 +228,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &i2c2 { @@ -339,18 +353,7 @@ status = "okay"; phy0: ethernet-phy@0 { - rxc-skew-ps = <900>; - rxdv-skew-ps = <0>; - rxd0-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd3-skew-ps = <0>; - txc-skew-ps = <900>; - txen-skew-ps = <0>; - txd0-skew-ps = <0>; - txd1-skew-ps = <0>; - txd2-skew-ps = <0>; - txd3-skew-ps = <0>; + rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index 7a8986edcdc0..639aa085d996 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts @@ -56,7 +56,7 @@ reg = <0x0 0x48000000 0x0 0x38000000>; }; - x12_clk: x12_clk { + x12_clk: x12 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24576000>; @@ -247,8 +247,22 @@ }; avb_pins: avb { - groups = "avb_mdc"; - function = "avb"; + mux { + groups = "avb_link", "avb_phy_int", "avb_mdc", + "avb_mii"; + function = "avb"; + }; + + pins_mdc { + groups = "avb_mdc"; + drive-strength = <24>; + }; + + pins_mii_tx { + pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0", + "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3"; + drive-strength = <12>; + }; }; du_pins: du { @@ -348,7 +362,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &i2c2 { @@ -485,6 +498,10 @@ clock-frequency = <22579200>; }; +&i2c_dvfs { + status = "okay"; +}; + &avb { pinctrl-0 = <&avb_pins>; pinctrl-names = "default"; @@ -493,18 +510,7 @@ status = "okay"; phy0: ethernet-phy@0 { - rxc-skew-ps = <900>; - rxdv-skew-ps = <0>; - rxd0-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd3-skew-ps = <0>; - txc-skew-ps = <900>; - txen-skew-ps = <0>; - txd0-skew-ps = <0>; - txd1-skew-ps = <0>; - txd2-skew-ps = <0>; - txd3-skew-ps = <0>; + rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; @@ -567,7 +573,6 @@ &pcie_bus_clk { clock-frequency = <100000000>; - status = "okay"; }; &pciec0 { diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index eac4f29aa5cd..e99d6443b3e4 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi @@ -25,10 +25,11 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + i2c7 = &i2c_dvfs; }; psci { - compatible = "arm,psci-0.2"; + compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; }; @@ -72,17 +73,51 @@ enable-method = "psci"; }; - L2_CA57: cache-controller@0 { + a53_0: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc R8A7795_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + L2_CA57: cache-controller-0 { compatible = "cache"; - reg = <0>; power-domains = <&sysc R8A7795_PD_CA57_SCU>; cache-unified; cache-level = <2>; }; - L2_CA53: cache-controller@100 { + L2_CA53: cache-controller-1 { compatible = "cache"; - reg = <0x100>; power-domains = <&sysc R8A7795_PD_CA53_SCU>; cache-unified; cache-level = <2>; @@ -165,10 +200,11 @@ <0x0 0xf1040000 0 0x20000>, <0x0 0xf1060000 0 0x20000>; interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; wdt0: watchdog@e6020000 { @@ -176,6 +212,7 @@ reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 402>; status = "disabled"; }; @@ -191,6 +228,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { @@ -205,6 +243,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { @@ -219,6 +258,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { @@ -233,6 +273,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { @@ -247,6 +288,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { @@ -261,6 +303,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055400 { @@ -275,6 +318,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 906>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 906>; }; gpio7: gpio@e6055800 { @@ -289,6 +333,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 905>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; pmu_a57 { @@ -303,16 +348,28 @@ <&a57_3>; }; + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, + <&a53_1>, + <&a53_2>, + <&a53_3>; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; }; cpg: clock-controller@e6150000 { @@ -322,6 +379,7 @@ clock-names = "extal", "extalr"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; rst: reset-controller@e6160000 { @@ -358,6 +416,7 @@ GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 407>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 407>; }; dmac0: dma-controller@e6700000 { @@ -389,6 +448,7 @@ clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; }; @@ -422,6 +482,7 @@ clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; }; @@ -455,6 +516,7 @@ clocks = <&cpg CPG_MOD 217>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; }; @@ -488,6 +550,7 @@ clocks = <&cpg CPG_MOD 502>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 502>; #dma-cells = <1>; dma-channels = <16>; }; @@ -521,6 +584,7 @@ clocks = <&cpg CPG_MOD 501>; clock-names = "fck"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 501>; #dma-cells = <1>; dma-channels = <16>; }; @@ -563,7 +627,8 @@ "ch24"; clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; - phy-mode = "rgmii-id"; + resets = <&cpg 812>; + phy-mode = "rgmii-txid"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -581,6 +646,7 @@ assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; assigned-clock-rates = <40000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -596,6 +662,7 @@ assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; assigned-clock-rates = <40000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; @@ -612,6 +679,7 @@ assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>; assigned-clock-rates = <40000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 914>; status = "disabled"; channel0 { @@ -636,6 +704,7 @@ dmas = <&dmac1 0x31>, <&dmac1 0x30>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 520>; status = "disabled"; }; @@ -652,6 +721,7 @@ dmas = <&dmac1 0x33>, <&dmac1 0x32>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 519>; status = "disabled"; }; @@ -668,6 +738,7 @@ dmas = <&dmac1 0x35>, <&dmac1 0x34>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 518>; status = "disabled"; }; @@ -684,6 +755,7 @@ dmas = <&dmac0 0x37>, <&dmac0 0x36>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 517>; status = "disabled"; }; @@ -700,6 +772,7 @@ dmas = <&dmac0 0x39>, <&dmac0 0x38>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 516>; status = "disabled"; }; @@ -715,6 +788,7 @@ dmas = <&dmac1 0x51>, <&dmac1 0x50>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 207>; status = "disabled"; }; @@ -730,6 +804,7 @@ dmas = <&dmac1 0x53>, <&dmac1 0x52>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 206>; status = "disabled"; }; @@ -745,6 +820,7 @@ dmas = <&dmac1 0x13>, <&dmac1 0x12>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 310>; status = "disabled"; }; @@ -760,6 +836,7 @@ dmas = <&dmac0 0x57>, <&dmac0 0x56>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 204>; status = "disabled"; }; @@ -775,6 +852,7 @@ dmas = <&dmac0 0x59>, <&dmac0 0x58>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 203>; status = "disabled"; }; @@ -790,6 +868,21 @@ dmas = <&dmac1 0x5b>, <&dmac1 0x5a>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 202>; + status = "disabled"; + }; + + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7795", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 926>; status = "disabled"; }; @@ -802,6 +895,7 @@ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 931>; dmas = <&dmac1 0x91>, <&dmac1 0x90>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -817,6 +911,7 @@ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 930>; dmas = <&dmac1 0x93>, <&dmac1 0x92>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <6>; @@ -832,6 +927,7 @@ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 929>; dmas = <&dmac1 0x95>, <&dmac1 0x94>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <6>; @@ -847,6 +943,7 @@ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 928>; dmas = <&dmac0 0x97>, <&dmac0 0x96>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -862,6 +959,7 @@ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 927>; dmas = <&dmac0 0x99>, <&dmac0 0x98>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -877,6 +975,7 @@ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 919>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 919>; dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -892,6 +991,7 @@ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 918>; dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <6>; @@ -903,6 +1003,7 @@ reg = <0 0xe6e30000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -912,6 +1013,7 @@ reg = <0 0xe6e31000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -921,6 +1023,7 @@ reg = <0 0xe6e32000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -930,6 +1033,7 @@ reg = <0 0xe6e33000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -939,6 +1043,7 @@ reg = <0 0xe6e34000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -948,6 +1053,7 @@ reg = <0 0xe6e35000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -957,6 +1063,7 @@ reg = <0 0xe6e36000 0 0x8>; clocks = <&cpg CPG_MOD 523>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 523>; #pwm-cells = <2>; status = "disabled"; }; @@ -1015,11 +1122,11 @@ rcar_sound,dvc { dvc0: dvc-0 { - dmas = <&audma0 0xbc>; + dmas = <&audma1 0xbc>; dma-names = "tx"; }; dvc1: dvc-1 { - dmas = <&audma0 0xbe>; + dmas = <&audma1 0xbe>; dma-names = "tx"; }; }; @@ -1149,10 +1256,11 @@ sata: sata@ee300000 { compatible = "renesas,sata-r8a7795"; - reg = <0 0xee300000 0 0x1fff>; + reg = <0 0xee300000 0 0x200000>; interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 815>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 815>; status = "disabled"; }; @@ -1162,6 +1270,7 @@ interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 328>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 328>; status = "disabled"; }; @@ -1171,6 +1280,7 @@ interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 327>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 327>; status = "disabled"; }; @@ -1183,6 +1293,7 @@ interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 330>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 330>; #dma-cells = <1>; dma-channels = <2>; }; @@ -1196,6 +1307,7 @@ interrupt-names = "ch0", "ch1"; clocks = <&cpg CPG_MOD 331>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 331>; #dma-cells = <1>; dma-channels = <2>; }; @@ -1207,6 +1319,7 @@ clocks = <&cpg CPG_MOD 314>; max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -1217,6 +1330,7 @@ clocks = <&cpg CPG_MOD 313>; max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 313>; status = "disabled"; }; @@ -1227,6 +1341,7 @@ clocks = <&cpg CPG_MOD 312>; max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 312>; status = "disabled"; }; @@ -1237,6 +1352,7 @@ clocks = <&cpg CPG_MOD 311>; max-frequency = <200000000>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 311>; status = "disabled"; }; @@ -1247,6 +1363,7 @@ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 703>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>; #phy-cells = <0>; status = "disabled"; }; @@ -1257,6 +1374,7 @@ reg = <0 0xee0a0200 0 0x700>; clocks = <&cpg CPG_MOD 702>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 702>; #phy-cells = <0>; status = "disabled"; }; @@ -1267,6 +1385,7 @@ reg = <0 0xee0c0200 0 0x700>; clocks = <&cpg CPG_MOD 701>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 701>; #phy-cells = <0>; status = "disabled"; }; @@ -1279,6 +1398,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; }; @@ -1290,6 +1410,7 @@ phys = <&usb2_phy1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 702>; status = "disabled"; }; @@ -1301,6 +1422,7 @@ phys = <&usb2_phy2>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 701>; status = "disabled"; }; @@ -1312,6 +1434,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 703>; status = "disabled"; }; @@ -1323,6 +1446,7 @@ phys = <&usb2_phy1>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 702>; status = "disabled"; }; @@ -1334,6 +1458,7 @@ phys = <&usb2_phy2>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 701>; status = "disabled"; }; @@ -1350,6 +1475,7 @@ phys = <&usb2_phy0>; phy-names = "usb"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 704>; status = "disabled"; }; @@ -1376,6 +1502,7 @@ clocks = <&cpg CPG_MOD 319>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 319>; status = "disabled"; }; @@ -1402,6 +1529,7 @@ clocks = <&cpg CPG_MOD 318>, <&pcie_bus_clk>; clock-names = "pcie", "pcie_bus"; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 318>; status = "disabled"; }; @@ -1411,6 +1539,7 @@ interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 624>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 624>; renesas,fcp = <&fcpvb1>; }; @@ -1420,6 +1549,7 @@ reg = <0 0xfe92f000 0 0x200>; clocks = <&cpg CPG_MOD 606>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 606>; }; fcpf0: fcp@fe950000 { @@ -1427,6 +1557,7 @@ reg = <0 0xfe950000 0 0x200>; clocks = <&cpg CPG_MOD 615>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 615>; }; fcpf1: fcp@fe951000 { @@ -1434,6 +1565,7 @@ reg = <0 0xfe951000 0 0x200>; clocks = <&cpg CPG_MOD 614>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 614>; }; fcpf2: fcp@fe952000 { @@ -1441,6 +1573,7 @@ reg = <0 0xfe952000 0 0x200>; clocks = <&cpg CPG_MOD 613>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 613>; }; vspbd: vsp@fe960000 { @@ -1449,6 +1582,7 @@ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 626>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 626>; renesas,fcp = <&fcpvb0>; }; @@ -1458,6 +1592,7 @@ reg = <0 0xfe96f000 0 0x200>; clocks = <&cpg CPG_MOD 607>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 607>; }; vspi0: vsp@fe9a0000 { @@ -1466,6 +1601,7 @@ interrupts = <GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 631>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 631>; renesas,fcp = <&fcpvi0>; }; @@ -1475,6 +1611,7 @@ reg = <0 0xfe9af000 0 0x200>; clocks = <&cpg CPG_MOD 611>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 611>; }; vspi1: vsp@fe9b0000 { @@ -1483,6 +1620,7 @@ interrupts = <GIC_SPI 445 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 630>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 630>; renesas,fcp = <&fcpvi1>; }; @@ -1492,6 +1630,7 @@ reg = <0 0xfe9bf000 0 0x200>; clocks = <&cpg CPG_MOD 610>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 610>; }; vspi2: vsp@fe9c0000 { @@ -1500,6 +1639,7 @@ interrupts = <GIC_SPI 446 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 629>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 629>; renesas,fcp = <&fcpvi2>; }; @@ -1509,6 +1649,7 @@ reg = <0 0xfe9cf000 0 0x200>; clocks = <&cpg CPG_MOD 609>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 609>; }; vspd0: vsp@fea20000 { @@ -1517,6 +1658,7 @@ interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 623>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 623>; renesas,fcp = <&fcpvd0>; }; @@ -1526,6 +1668,7 @@ reg = <0 0xfea27000 0 0x200>; clocks = <&cpg CPG_MOD 603>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 603>; }; vspd1: vsp@fea28000 { @@ -1534,6 +1677,7 @@ interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 622>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 622>; renesas,fcp = <&fcpvd1>; }; @@ -1543,6 +1687,7 @@ reg = <0 0xfea2f000 0 0x200>; clocks = <&cpg CPG_MOD 602>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 602>; }; vspd2: vsp@fea30000 { @@ -1551,6 +1696,7 @@ interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 621>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 621>; renesas,fcp = <&fcpvd2>; }; @@ -1560,6 +1706,7 @@ reg = <0 0xfea37000 0 0x200>; clocks = <&cpg CPG_MOD 601>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 601>; }; vspd3: vsp@fea38000 { @@ -1568,6 +1715,7 @@ interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 620>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 620>; renesas,fcp = <&fcpvd3>; }; @@ -1577,6 +1725,7 @@ reg = <0 0xfea3f000 0 0x200>; clocks = <&cpg CPG_MOD 600>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 600>; }; fdp1@fe940000 { @@ -1585,6 +1734,7 @@ interrupts = <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 119>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 119>; renesas,fcp = <&fcpf0>; }; @@ -1594,6 +1744,7 @@ interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 118>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 118>; renesas,fcp = <&fcpf1>; }; @@ -1603,6 +1754,7 @@ interrupts = <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 117>; power-domains = <&sysc R8A7795_PD_A3VP>; + resets = <&cpg 117>; renesas,fcp = <&fcpf2>; }; @@ -1662,6 +1814,7 @@ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 522>; #thermal-sensor-cells = <1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts index c3f064ac2cb4..372b2a944716 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-m3ulcb.dts @@ -180,7 +180,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &wdt0 { diff --git a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts index c7f40f8f3169..c9f59b6ce33f 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts +++ b/arch/arm64/boot/dts/renesas/r8a7796-salvator-x.dts @@ -18,6 +18,7 @@ aliases { serial0 = &scif2; + serial1 = &scif1; ethernet0 = &avb; }; @@ -113,6 +114,11 @@ function = "avb"; }; + scif1_pins: scif1 { + groups = "scif1_data_a", "scif1_ctrl"; + function = "scif1"; + }; + scif2_pins: scif2 { groups = "scif2_data_a"; function = "scif2"; @@ -172,18 +178,7 @@ status = "okay"; phy0: ethernet-phy@0 { - rxc-skew-ps = <900>; - rxdv-skew-ps = <0>; - rxd0-skew-ps = <0>; - rxd1-skew-ps = <0>; - rxd2-skew-ps = <0>; - rxd3-skew-ps = <0>; - txc-skew-ps = <900>; - txen-skew-ps = <0>; - txd0-skew-ps = <0>; - txd1-skew-ps = <0>; - txd2-skew-ps = <0>; - txd3-skew-ps = <0>; + rxc-skew-ps = <1500>; reg = <0>; interrupt-parent = <&gpio2>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; @@ -239,6 +234,14 @@ status = "okay"; }; +&scif1 { + pinctrl-0 = <&scif1_pins>; + pinctrl-names = "default"; + + uart-has-rtscts; + status = "okay"; +}; + &scif2 { pinctrl-0 = <&scif2_pins>; pinctrl-names = "default"; @@ -247,7 +250,6 @@ &scif_clk { clock-frequency = <14745600>; - status = "okay"; }; &i2c2 { @@ -261,3 +263,7 @@ timeout-sec = <60>; status = "okay"; }; + +&i2c_dvfs { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/renesas/r8a7796.dtsi b/arch/arm64/boot/dts/renesas/r8a7796.dtsi index f7120cdedd0d..2ec1ed5f4991 100644 --- a/arch/arm64/boot/dts/renesas/r8a7796.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7796.dtsi @@ -25,10 +25,11 @@ i2c4 = &i2c4; i2c5 = &i2c5; i2c6 = &i2c6; + i2c7 = &i2c_dvfs; }; psci { - compatible = "arm,psci-0.2"; + compatible = "arm,psci-1.0", "arm,psci-0.2"; method = "smc"; }; @@ -36,7 +37,6 @@ #address-cells = <1>; #size-cells = <0>; - /* 1 core only at this point */ a57_0: cpu@0 { compatible = "arm,cortex-a57", "arm,armv8"; reg = <0x0>; @@ -46,13 +46,64 @@ enable-method = "psci"; }; - L2_CA57: cache-controller@0 { + a57_1: cpu@1 { + compatible = "arm,cortex-a57","arm,armv8"; + reg = <0x1>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA57_CPU1>; + next-level-cache = <&L2_CA57>; + enable-method = "psci"; + }; + + a53_0: cpu@100 { + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x100>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA53_CPU0>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_1: cpu@101 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x101>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA53_CPU1>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_2: cpu@102 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x102>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA53_CPU2>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + a53_3: cpu@103 { + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x103>; + device_type = "cpu"; + power-domains = <&sysc R8A7796_PD_CA53_CPU3>; + next-level-cache = <&L2_CA53>; + enable-method = "psci"; + }; + + L2_CA57: cache-controller-0 { compatible = "cache"; - reg = <0>; power-domains = <&sysc R8A7796_PD_CA57_SCU>; cache-unified; cache-level = <2>; }; + + L2_CA53: cache-controller-1 { + compatible = "cache"; + power-domains = <&sysc R8A7796_PD_CA53_SCU>; + cache-unified; + cache-level = <2>; + }; }; extal_clk: extal { @@ -100,22 +151,23 @@ <0x0 0xf1040000 0 0x20000>, <0x0 0xf1060000 0 0x20000>; interrupts = <GIC_PPI 9 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>; + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>; clocks = <&cpg CPG_MOD 408>; clock-names = "clk"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 408>; }; timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 14 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 - (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; + (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>; }; wdt0: watchdog@e6020000 { @@ -124,6 +176,7 @@ reg = <0 0xe6020000 0 0x0c>; clocks = <&cpg CPG_MOD 402>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 402>; status = "disabled"; }; @@ -139,6 +192,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 912>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 912>; }; gpio1: gpio@e6051000 { @@ -153,6 +207,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 911>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 911>; }; gpio2: gpio@e6052000 { @@ -167,6 +222,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 910>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 910>; }; gpio3: gpio@e6053000 { @@ -181,6 +237,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 909>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 909>; }; gpio4: gpio@e6054000 { @@ -195,6 +252,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 908>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 908>; }; gpio5: gpio@e6055000 { @@ -209,6 +267,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 907>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 907>; }; gpio6: gpio@e6055400 { @@ -223,6 +282,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 906>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 906>; }; gpio7: gpio@e6055800 { @@ -237,6 +297,7 @@ interrupt-controller; clocks = <&cpg CPG_MOD 905>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 905>; }; pfc: pin-controller@e6060000 { @@ -244,6 +305,26 @@ reg = <0 0xe6060000 0 0x50c>; }; + pmu_a57 { + compatible = "arm,cortex-a57-pmu"; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a57_0>, + <&a57_1>; + }; + + pmu_a53 { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&a53_0>, + <&a53_1>, + <&a53_2>, + <&a53_3>; + }; + cpg: clock-controller@e6150000 { compatible = "renesas,r8a7796-cpg-mssr"; reg = <0 0xe6150000 0 0x1000>; @@ -251,6 +332,7 @@ clock-names = "extal", "extalr"; #clock-cells = <2>; #power-domain-cells = <0>; + #reset-cells = <1>; }; rst: reset-controller@e6160000 { @@ -269,6 +351,20 @@ #power-domain-cells = <1>; }; + i2c_dvfs: i2c@e60b0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,iic-r8a7796", + "renesas,rcar-gen3-iic", + "renesas,rmobile-iic"; + reg = <0 0xe60b0000 0 0x425>; + interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 926>; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 926>; + status = "disabled"; + }; + i2c0: i2c@e6500000 { #address-cells = <1>; #size-cells = <0>; @@ -278,6 +374,7 @@ interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 931>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 931>; dmas = <&dmac1 0x91>, <&dmac1 0x90>, <&dmac2 0x91>, <&dmac2 0x90>; dma-names = "tx", "rx", "tx", "rx"; @@ -294,6 +391,7 @@ interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 930>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 930>; dmas = <&dmac1 0x93>, <&dmac1 0x92>, <&dmac2 0x93>, <&dmac2 0x92>; dma-names = "tx", "rx", "tx", "rx"; @@ -310,6 +408,7 @@ interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 929>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 929>; dmas = <&dmac1 0x95>, <&dmac1 0x94>, <&dmac2 0x95>, <&dmac2 0x94>; dma-names = "tx", "rx", "tx", "rx"; @@ -326,6 +425,7 @@ interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 928>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 928>; dmas = <&dmac0 0x97>, <&dmac0 0x96>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -341,6 +441,7 @@ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 927>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 927>; dmas = <&dmac0 0x99>, <&dmac0 0x98>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -356,6 +457,7 @@ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 919>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 919>; dmas = <&dmac0 0x9b>, <&dmac0 0x9a>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <110>; @@ -371,6 +473,7 @@ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 918>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 918>; dmas = <&dmac0 0x9d>, <&dmac0 0x9c>; dma-names = "tx", "rx"; i2c-scl-internal-delay-ns = <6>; @@ -389,6 +492,7 @@ assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>; assigned-clock-rates = <40000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 916>; status = "disabled"; }; @@ -404,6 +508,7 @@ assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>; assigned-clock-rates = <40000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 915>; status = "disabled"; }; @@ -420,6 +525,7 @@ assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>; assigned-clock-rates = <40000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 914>; status = "disabled"; channel0 { @@ -469,12 +575,135 @@ "ch24"; clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; - phy-mode = "rgmii-id"; + resets = <&cpg 812>; + phy-mode = "rgmii-txid"; #address-cells = <1>; #size-cells = <0>; status = "disabled"; }; + hscif0: serial@e6540000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6540000 0 0x60>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 520>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x31>, <&dmac1 0x30>, + <&dmac2 0x31>, <&dmac2 0x30>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 520>; + status = "disabled"; + }; + + hscif1: serial@e6550000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6550000 0 0x60>; + interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 519>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x33>, <&dmac1 0x32>, + <&dmac2 0x33>, <&dmac2 0x32>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 519>; + status = "disabled"; + }; + + hscif2: serial@e6560000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe6560000 0 0x60>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 518>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x35>, <&dmac1 0x34>, + <&dmac2 0x35>, <&dmac2 0x34>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 518>; + status = "disabled"; + }; + + hscif3: serial@e66a0000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66a0000 0 0x60>; + interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 517>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x37>, <&dmac0 0x36>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 517>; + status = "disabled"; + }; + + hscif4: serial@e66b0000 { + compatible = "renesas,hscif-r8a7796", + "renesas,rcar-gen3-hscif", + "renesas,hscif"; + reg = <0 0xe66b0000 0 0x60>; + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 516>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x39>, <&dmac0 0x38>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 516>; + status = "disabled"; + }; + + scif0: serial@e6e60000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e60000 0 64>; + interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 207>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x51>, <&dmac1 0x50>, + <&dmac2 0x51>, <&dmac2 0x50>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 207>; + status = "disabled"; + }; + + scif1: serial@e6e68000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6e68000 0 64>; + interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 206>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x53>, <&dmac1 0x52>, + <&dmac2 0x53>, <&dmac2 0x52>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 206>; + status = "disabled"; + }; + scif2: serial@e6e88000 { compatible = "renesas,scif-r8a7796", "renesas,rcar-gen3-scif", "renesas,scif"; @@ -485,6 +714,56 @@ <&scif_clk>; clock-names = "fck", "brg_int", "scif_clk"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 310>; + status = "disabled"; + }; + + scif3: serial@e6c50000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c50000 0 64>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 204>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x57>, <&dmac0 0x56>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 204>; + status = "disabled"; + }; + + scif4: serial@e6c40000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6c40000 0 64>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 203>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac0 0x59>, <&dmac0 0x58>; + dma-names = "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 203>; + status = "disabled"; + }; + + scif5: serial@e6f30000 { + compatible = "renesas,scif-r8a7796", + "renesas,rcar-gen3-scif", "renesas,scif"; + reg = <0 0xe6f30000 0 64>; + interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 202>, + <&cpg CPG_CORE R8A7796_CLK_S3D1>, + <&scif_clk>; + clock-names = "fck", "brg_int", "scif_clk"; + dmas = <&dmac1 0x5b>, <&dmac1 0x5a>, + <&dmac2 0x5b>, <&dmac2 0x5a>; + dma-names = "tx", "rx", "tx", "rx"; + power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 202>; status = "disabled"; }; @@ -498,6 +777,7 @@ <&dmac2 0x41>, <&dmac2 0x40>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 211>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -513,6 +793,7 @@ <&dmac2 0x43>, <&dmac2 0x42>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 210>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -527,6 +808,7 @@ dmas = <&dmac0 0x45>, <&dmac0 0x44>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 209>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -541,6 +823,7 @@ dmas = <&dmac0 0x47>, <&dmac0 0x46>; dma-names = "tx", "rx"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 208>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -575,6 +858,7 @@ clocks = <&cpg CPG_MOD 219>; clock-names = "fck"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 219>; #dma-cells = <1>; dma-channels = <16>; }; @@ -608,6 +892,7 @@ clocks = <&cpg CPG_MOD 218>; clock-names = "fck"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 218>; #dma-cells = <1>; dma-channels = <16>; }; @@ -641,6 +926,7 @@ clocks = <&cpg CPG_MOD 217>; clock-names = "fck"; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 217>; #dma-cells = <1>; dma-channels = <16>; }; @@ -652,6 +938,7 @@ clocks = <&cpg CPG_MOD 314>; max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 314>; status = "disabled"; }; @@ -662,6 +949,7 @@ clocks = <&cpg CPG_MOD 313>; max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 313>; status = "disabled"; }; @@ -672,6 +960,7 @@ clocks = <&cpg CPG_MOD 312>; max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 312>; status = "disabled"; }; @@ -682,6 +971,7 @@ clocks = <&cpg CPG_MOD 311>; max-frequency = <200000000>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 311>; status = "disabled"; }; @@ -695,6 +985,7 @@ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cpg CPG_MOD 522>; power-domains = <&sysc R8A7796_PD_ALWAYS_ON>; + resets = <&cpg 522>; #thermal-sensor-cells = <1>; status = "okay"; }; diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 3a862894ea44..b5636bba6b1c 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -1,9 +1,11 @@ +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-evb-act8846.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-geekbox.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-orion-r68-meta.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-px5-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3368-r88.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-evb.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-gru-kevin.dtb always := $(dtb-y) subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/rockchip/rk3328-evb.dts b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts new file mode 100644 index 000000000000..cf272392cebf --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328-evb.dts @@ -0,0 +1,57 @@ +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3328.dtsi" + +/ { + model = "Rockchip RK3328 EVB"; + compatible = "rockchip,rk3328-evb", "rockchip,rk3328"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; +}; + +&uart2 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi new file mode 100644 index 000000000000..7e69f1fe78d6 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -0,0 +1,1264 @@ +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/clock/rk3328-cru.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/power/rk3328-power.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> + +/ { + compatible = "rockchip,rk3328"; + + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x0>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x1>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x2>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53", "arm,armv8"; + reg = <0x0 0x3>; + clocks = <&cru ARMCLK>; + enable-method = "psci"; + next-level-cache = <&l2>; + }; + + l2: l2-cache0 { + compatible = "cache"; + }; + }; + + amba { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac: dmac@ff1f0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff1f0000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + }; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + psci { + compatible = "arm,psci-1.0", "arm,psci-0.2"; + method = "smc"; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + xin24m: xin24m { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + }; + + grf: syscon@ff100000 { + compatible = "rockchip,rk3328-grf", "syscon", "simple-mfd"; + reg = <0x0 0xff100000 0x0 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + power: power-controller { + compatible = "rockchip,rk3328-power-controller"; + #power-domain-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + pd_hevc@RK3328_PD_HEVC { + reg = <RK3328_PD_HEVC>; + }; + pd_video@RK3328_PD_VIDEO { + reg = <RK3328_PD_VIDEO>; + }; + pd_vpu@RK3328_PD_VPU { + reg = <RK3328_PD_VPU>; + }; + }; + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x5c8>; + mode-normal = <BOOT_NORMAL>; + mode-recovery = <BOOT_RECOVERY>; + mode-bootloader = <BOOT_FASTBOOT>; + mode-loader = <BOOT_BL_DOWNLOAD>; + }; + + }; + + uart0: serial@ff110000 { + compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff110000 0x0 0x100>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 2>, <&dmac 3>; + #dma-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart1: serial@ff120000 { + compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff120000 0x0 0x100>; + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "sclk_uart", "pclk_uart"; + dmas = <&dmac 4>, <&dmac 5>; + #dma-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts &uart1_rts>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + uart2: serial@ff130000 { + compatible = "rockchip,rk3328-uart", "snps,dw-apb-uart"; + reg = <0x0 0xff130000 0x0 0x100>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + dmas = <&dmac 6>, <&dmac 7>; + #dma-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&uart2m1_xfer>; + reg-io-width = <4>; + reg-shift = <2>; + status = "disabled"; + }; + + i2c0: i2c@ff150000 { + compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff150000 0x0 0x1000>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C0>, <&cru PCLK_I2C0>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + status = "disabled"; + }; + + i2c1: i2c@ff160000 { + compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff160000 0x0 0x1000>; + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + status = "disabled"; + }; + + i2c2: i2c@ff170000 { + compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff170000 0x0 0x1000>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + status = "disabled"; + }; + + i2c3: i2c@ff180000 { + compatible = "rockchip,rk3328-i2c", "rockchip,rk3399-i2c"; + reg = <0x0 0xff180000 0x0 0x1000>; + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; + clock-names = "i2c", "pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + status = "disabled"; + }; + + spi0: spi@ff190000 { + compatible = "rockchip,rk3328-spi", "rockchip,rk3066-spi"; + reg = <0x0 0xff190000 0x0 0x1000>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&cru SCLK_SPI>, <&cru PCLK_SPI>; + clock-names = "spiclk", "apb_pclk"; + dmas = <&dmac 8>, <&dmac 9>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0m2_clk &spi0m2_tx &spi0m2_rx &spi0m2_cs0>; + status = "disabled"; + }; + + wdt: watchdog@ff1a0000 { + compatible = "snps,dw-wdt"; + reg = <0x0 0xff1a0000 0x0 0x100>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + }; + + saradc: adc@ff280000 { + compatible = "rockchip,rk3328-saradc", "rockchip,rk3399-saradc"; + reg = <0x0 0xff280000 0x0 0x100>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; + clock-names = "saradc", "apb_pclk"; + resets = <&cru SRST_SARADC_P>; + reset-names = "saradc-apb"; + status = "disabled"; + }; + + cru: clock-controller@ff440000 { + compatible = "rockchip,rk3328-cru", "rockchip,cru", "syscon"; + reg = <0x0 0xff440000 0x0 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + assigned-clocks = + /* + * CPLL should run at 1200, but that is to high for + * the initial dividers of most of its children. + * We need set cpll child clk div first, + * and then set the cpll frequency. + */ + <&cru DCLK_LCDC>, <&cru SCLK_PDM>, + <&cru SCLK_RTC32K>, <&cru SCLK_UART0>, + <&cru SCLK_UART1>, <&cru SCLK_UART2>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru ACLK_VIO_PRE>, <&cru ACLK_RGA_PRE>, + <&cru ACLK_VOP_PRE>, <&cru ACLK_RKVDEC_PRE>, + <&cru ACLK_RKVENC>, <&cru ACLK_VPU_PRE>, + <&cru SCLK_VDEC_CABAC>, <&cru SCLK_VDEC_CORE>, + <&cru SCLK_VENC_CORE>, <&cru SCLK_VENC_DSP>, + <&cru SCLK_SDIO>, <&cru SCLK_TSP>, + <&cru SCLK_WIFI>, <&cru ARMCLK>, + <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru ACLK_BUS_PRE>, <&cru HCLK_BUS_PRE>, + <&cru PCLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_PERI>, <&cru PCLK_PERI>, + <&cru SCLK_RTC32K>; + assigned-clock-parents = + <&cru HDMIPHY>, <&cru PLL_APLL>, + <&cru PLL_GPLL>, <&xin24m>, + <&xin24m>, <&xin24m>; + assigned-clock-rates = + <0>, <61440000>, + <0>, <24000000>, + <24000000>, <24000000>, + <15000000>, <15000000>, + <100000000>, <100000000>, + <100000000>, <100000000>, + <50000000>, <100000000>, + <100000000>, <100000000>, + <50000000>, <50000000>, + <50000000>, <50000000>, + <24000000>, <600000000>, + <491520000>, <1200000000>, + <150000000>, <75000000>, + <75000000>, <150000000>, + <75000000>, <75000000>, + <32768>; + }; + + gmac2io: ethernet@ff540000 { + compatible = "rockchip,rk3328-gmac"; + reg = <0x0 0xff540000 0x0 0x10000>; + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_RX>, + <&cru SCLK_MAC2IO_TX>, <&cru SCLK_MAC2IO_REF>, + <&cru SCLK_MAC2IO_REFOUT>, <&cru ACLK_MAC2IO>, + <&cru PCLK_MAC2IO>; + clock-names = "stmmaceth", "mac_clk_rx", + "mac_clk_tx", "clk_mac_ref", + "clk_mac_refout", "aclk_mac", + "pclk_mac"; + resets = <&cru SRST_GMAC2IO_A>; + reset-names = "stmmaceth"; + rockchip,grf = <&grf>; + status = "disabled"; + }; + + gic: interrupt-controller@ff811000 { + compatible = "arm,gic-400"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x0 0xff811000 0 0x1000>, + <0x0 0xff812000 0 0x2000>, + <0x0 0xff814000 0 0x2000>, + <0x0 0xff816000 0 0x2000>; + interrupts = <GIC_PPI 9 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3328-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + gpio0: gpio0@ff210000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff210000 0x0 0x100>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO0>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff220000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff220000 0x0 0x100>; + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff230000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff230000 0x0 0x100>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO2>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff240000 { + compatible = "rockchip,gpio-bank"; + reg = <0x0 0xff240000 0x0 0x100>; + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_GPIO3>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + pcfg_pull_none_2ma: pcfg-pull-none-2ma { + bias-disable; + drive-strength = <2>; + }; + + pcfg_pull_up_2ma: pcfg-pull-up-2ma { + bias-pull-up; + drive-strength = <2>; + }; + + pcfg_pull_up_4ma: pcfg-pull-up-4ma { + bias-pull-up; + drive-strength = <4>; + }; + + pcfg_pull_none_4ma: pcfg-pull-none-4ma { + bias-disable; + drive-strength = <4>; + }; + + pcfg_pull_down_4ma: pcfg-pull-down-4ma { + bias-pull-down; + drive-strength = <4>; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + pcfg_pull_up_8ma: pcfg-pull-up-8ma { + bias-pull-up; + drive-strength = <8>; + }; + + pcfg_pull_none_12ma: pcfg-pull-none-12ma { + bias-disable; + drive-strength = <12>; + }; + + pcfg_pull_up_12ma: pcfg-pull-up-12ma { + bias-pull-up; + drive-strength = <12>; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_input_high: pcfg-input-high { + bias-pull-up; + input-enable; + }; + + pcfg_input: pcfg-input { + input-enable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <2 RK_PD0 1 &pcfg_pull_none>, + <2 RK_PD1 1 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <2 RK_PA4 2 &pcfg_pull_none>, + <2 RK_PA5 2 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>, + <2 RK_PB6 1 &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <0 RK_PA5 2 &pcfg_pull_none>, + <0 RK_PA6 2 &pcfg_pull_none>; + }; + i2c3_gpio: i2c3-gpio { + rockchip,pins = + <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>, + <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi_i2c { + hdmii2c_xfer: hdmii2c-xfer { + rockchip,pins = <0 RK_PA5 1 &pcfg_pull_none>, + <0 RK_PA6 1 &pcfg_pull_none>; + }; + }; + + tsadc { + otp_gpio: otp-gpio { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + otp_out: otp-out { + rockchip,pins = <2 RK_PB5 1 &pcfg_pull_none>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <1 RK_PB1 1 &pcfg_pull_up>, + <1 RK_PB0 1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <1 RK_PB3 1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <1 RK_PB2 1 &pcfg_pull_none>; + }; + + uart0_rts_gpio: uart0-rts-gpio { + rockchip,pins = <1 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <3 RK_PA4 4 &pcfg_pull_up>, + <3 RK_PA6 4 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <3 RK_PA7 4 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <3 RK_PA5 4 &pcfg_pull_none>; + }; + + uart1_rts_gpio: uart1-rts-gpio { + rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + uart2-0 { + uart2m0_xfer: uart2m0-xfer { + rockchip,pins = <1 RK_PA0 2 &pcfg_pull_up>, + <1 RK_PA1 2 &pcfg_pull_none>; + }; + }; + + uart2-1 { + uart2m1_xfer: uart2m1-xfer { + rockchip,pins = <2 RK_PA0 1 &pcfg_pull_up>, + <2 RK_PA1 1 &pcfg_pull_none>; + }; + }; + + spi0-0 { + spi0m0_clk: spi0m0-clk { + rockchip,pins = <2 RK_PB0 1 &pcfg_pull_up>; + }; + + spi0m0_cs0: spi0m0-cs0 { + rockchip,pins = <2 RK_PB3 1 &pcfg_pull_up>; + }; + + spi0m0_tx: spi0m0-tx { + rockchip,pins = <2 RK_PB1 1 &pcfg_pull_up>; + }; + + spi0m0_rx: spi0m0-rx { + rockchip,pins = <2 RK_PB2 1 &pcfg_pull_up>; + }; + + spi0m0_cs1: spi0m0-cs1 { + rockchip,pins = <2 RK_PB4 1 &pcfg_pull_up>; + }; + }; + + spi0-1 { + spi0m1_clk: spi0m1-clk { + rockchip,pins = <3 RK_PC7 2 &pcfg_pull_up>; + }; + + spi0m1_cs0: spi0m1-cs0 { + rockchip,pins = <3 RK_PD2 2 &pcfg_pull_up>; + }; + + spi0m1_tx: spi0m1-tx { + rockchip,pins = <3 RK_PD1 2 &pcfg_pull_up>; + }; + + spi0m1_rx: spi0m1-rx { + rockchip,pins = <3 RK_PD0 2 &pcfg_pull_up>; + }; + + spi0m1_cs1: spi0m1-cs1 { + rockchip,pins = <3 RK_PD3 2 &pcfg_pull_up>; + }; + }; + + spi0-2 { + spi0m2_clk: spi0m2-clk { + rockchip,pins = <3 RK_PA0 4 &pcfg_pull_up>; + }; + + spi0m2_cs0: spi0m2-cs0 { + rockchip,pins = <3 RK_PB0 3 &pcfg_pull_up>; + }; + + spi0m2_tx: spi0m2-tx { + rockchip,pins = <3 RK_PA1 4 &pcfg_pull_up>; + }; + + spi0m2_rx: spi0m2-rx { + rockchip,pins = <3 RK_PA2 4 &pcfg_pull_up>; + }; + }; + + i2s1 { + i2s1_mclk: i2s1-mclk { + rockchip,pins = <2 RK_PB7 1 &pcfg_pull_none>; + }; + + i2s1_sclk: i2s1-sclk { + rockchip,pins = <2 RK_PC2 1 &pcfg_pull_none>; + }; + + i2s1_lrckrx: i2s1-lrckrx { + rockchip,pins = <2 RK_PC0 1 &pcfg_pull_none>; + }; + + i2s1_lrcktx: i2s1-lrcktx { + rockchip,pins = <2 RK_PC1 1 &pcfg_pull_none>; + }; + + i2s1_sdi: i2s1-sdi { + rockchip,pins = <2 RK_PC3 1 &pcfg_pull_none>; + }; + + i2s1_sdo: i2s1-sdo { + rockchip,pins = <2 RK_PC7 1 &pcfg_pull_none>; + }; + + i2s1_sdio1: i2s1-sdio1 { + rockchip,pins = <2 RK_PC4 1 &pcfg_pull_none>; + }; + + i2s1_sdio2: i2s1-sdio2 { + rockchip,pins = <2 RK_PC5 1 &pcfg_pull_none>; + }; + + i2s1_sdio3: i2s1-sdio3 { + rockchip,pins = <2 RK_PC6 1 &pcfg_pull_none>; + }; + + i2s1_sleep: i2s1-sleep { + rockchip,pins = + <2 RK_PB7 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC0 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC1 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC2 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC3 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC4 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>, + <2 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>; + }; + }; + + i2s2-0 { + i2s2m0_mclk: i2s2m0-mclk { + rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>; + }; + + i2s2m0_sclk: i2s2m0-sclk { + rockchip,pins = <1 RK_PC6 1 &pcfg_pull_none>; + }; + + i2s2m0_lrckrx: i2s2m0-lrckrx { + rockchip,pins = <1 RK_PD2 1 &pcfg_pull_none>; + }; + + i2s2m0_lrcktx: i2s2m0-lrcktx { + rockchip,pins = <1 RK_PC7 1 &pcfg_pull_none>; + }; + + i2s2m0_sdi: i2s2m0-sdi { + rockchip,pins = <1 RK_PD0 1 &pcfg_pull_none>; + }; + + i2s2m0_sdo: i2s2m0-sdo { + rockchip,pins = <1 RK_PD1 1 &pcfg_pull_none>; + }; + + i2s2m0_sleep: i2s2m0-sleep { + rockchip,pins = + <1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>, + <1 RK_PC6 RK_FUNC_GPIO &pcfg_input_high>, + <1 RK_PD2 RK_FUNC_GPIO &pcfg_input_high>, + <1 RK_PC7 RK_FUNC_GPIO &pcfg_input_high>, + <1 RK_PD0 RK_FUNC_GPIO &pcfg_input_high>, + <1 RK_PD1 RK_FUNC_GPIO &pcfg_input_high>; + }; + }; + + i2s2-1 { + i2s2m1_mclk: i2s2m1-mclk { + rockchip,pins = <1 RK_PC5 1 &pcfg_pull_none>; + }; + + i2s2m1_sclk: i2s2m1-sclk { + rockchip,pins = <3 RK_PA0 6 &pcfg_pull_none>; + }; + + i2s2m1_lrckrx: i2sm1-lrckrx { + rockchip,pins = <3 RK_PB0 6 &pcfg_pull_none>; + }; + + i2s2m1_lrcktx: i2s2m1-lrcktx { + rockchip,pins = <3 RK_PB0 4 &pcfg_pull_none>; + }; + + i2s2m1_sdi: i2s2m1-sdi { + rockchip,pins = <3 RK_PA2 6 &pcfg_pull_none>; + }; + + i2s2m1_sdo: i2s2m1-sdo { + rockchip,pins = <3 RK_PA1 6 &pcfg_pull_none>; + }; + + i2s2m1_sleep: i2s2m1-sleep { + rockchip,pins = + <1 RK_PC5 RK_FUNC_GPIO &pcfg_input_high>, + <3 RK_PA0 RK_FUNC_GPIO &pcfg_input_high>, + <3 RK_PB0 RK_FUNC_GPIO &pcfg_input_high>, + <3 RK_PA2 RK_FUNC_GPIO &pcfg_input_high>, + <3 RK_PA1 RK_FUNC_GPIO &pcfg_input_high>; + }; + }; + + spdif-0 { + spdifm0_tx: spdifm0-tx { + rockchip,pins = <0 RK_PD3 1 &pcfg_pull_none>; + }; + }; + + spdif-1 { + spdifm1_tx: spdifm1-tx { + rockchip,pins = <2 RK_PC1 2 &pcfg_pull_none>; + }; + }; + + spdif-2 { + spdifm2_tx: spdifm2-tx { + rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>; + }; + }; + + sdmmc0-0 { + sdmmc0m0_pwren: sdmmc0m0-pwren { + rockchip,pins = <2 RK_PA7 1 &pcfg_pull_up_4ma>; + }; + + sdmmc0m0_gpio: sdmmc0m0-gpio { + rockchip,pins = <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + + sdmmc0-1 { + sdmmc0m1_pwren: sdmmc0m1-pwren { + rockchip,pins = <0 RK_PD6 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0m1_gpio: sdmmc0m1-gpio { + rockchip,pins = <0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + + sdmmc0 { + sdmmc0_clk: sdmmc0-clk { + rockchip,pins = <1 RK_PA6 1 &pcfg_pull_none_4ma>; + }; + + sdmmc0_cmd: sdmmc0-cmd { + rockchip,pins = <1 RK_PA4 1 &pcfg_pull_up_4ma>; + }; + + sdmmc0_dectn: sdmmc0-dectn { + rockchip,pins = <1 RK_PA5 1 &pcfg_pull_up_4ma>; + }; + + sdmmc0_wrprt: sdmmc0-wrprt { + rockchip,pins = <1 RK_PA7 1 &pcfg_pull_up_4ma>; + }; + + sdmmc0_bus1: sdmmc0-bus1 { + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_4ma>; + }; + + sdmmc0_bus4: sdmmc0-bus4 { + rockchip,pins = <1 RK_PA0 1 &pcfg_pull_up_4ma>, + <1 RK_PA1 1 &pcfg_pull_up_4ma>, + <1 RK_PA2 1 &pcfg_pull_up_4ma>, + <1 RK_PA3 1 &pcfg_pull_up_4ma>; + }; + + sdmmc0_gpio: sdmmc0-gpio { + rockchip,pins = + <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + + sdmmc0ext { + sdmmc0ext_clk: sdmmc0ext-clk { + rockchip,pins = <3 RK_PA2 3 &pcfg_pull_none_4ma>; + }; + + sdmmc0ext_cmd: sdmmc0ext-cmd { + rockchip,pins = <3 RK_PA0 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0ext_wrprt: sdmmc0ext-wrprt { + rockchip,pins = <3 RK_PA3 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0ext_dectn: sdmmc0ext-dectn { + rockchip,pins = <3 RK_PA1 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0ext_bus1: sdmmc0ext-bus1 { + rockchip,pins = <3 RK_PA4 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0ext_bus4: sdmmc0ext-bus4 { + rockchip,pins = + <3 RK_PA4 3 &pcfg_pull_up_4ma>, + <3 RK_PA5 3 &pcfg_pull_up_4ma>, + <3 RK_PA6 3 &pcfg_pull_up_4ma>, + <3 RK_PA7 3 &pcfg_pull_up_4ma>; + }; + + sdmmc0ext_gpio: sdmmc0ext-gpio { + rockchip,pins = + <3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + + sdmmc1 { + sdmmc1_clk: sdmmc1-clk { + rockchip,pins = <1 RK_PB4 1 &pcfg_pull_none_8ma>; + }; + + sdmmc1_cmd: sdmmc1-cmd { + rockchip,pins = <1 RK_PB5 1 &pcfg_pull_up_8ma>; + }; + + sdmmc1_pwren: sdmmc1-pwren { + rockchip,pins = <1 RK_PC2 1 &pcfg_pull_up_8ma>; + }; + + sdmmc1_wrprt: sdmmc1-wrprt { + rockchip,pins = <1 RK_PC4 1 &pcfg_pull_up_8ma>; + }; + + sdmmc1_dectn: sdmmc1-dectn { + rockchip,pins = <1 RK_PC3 1 &pcfg_pull_up_8ma>; + }; + + sdmmc1_bus1: sdmmc1-bus1 { + rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>; + }; + + sdmmc1_bus4: sdmmc1-bus4 { + rockchip,pins = <1 RK_PB6 1 &pcfg_pull_up_8ma>, + <1 RK_PB7 1 &pcfg_pull_up_8ma>, + <1 RK_PC0 1 &pcfg_pull_up_8ma>, + <1 RK_PC1 1 &pcfg_pull_up_8ma>; + }; + + sdmmc1_gpio: sdmmc1-gpio { + rockchip,pins = + <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PC0 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up_4ma>, + <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_up_4ma>; + }; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <3 RK_PC5 2 &pcfg_pull_none_12ma>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <3 RK_PC3 2 &pcfg_pull_up_12ma>; + }; + + emmc_pwren: emmc-pwren { + rockchip,pins = <3 RK_PC6 2 &pcfg_pull_none>; + }; + + emmc_rstnout: emmc-rstnout { + rockchip,pins = <3 RK_PC4 2 &pcfg_pull_none>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = <0 RK_PA7 2 &pcfg_pull_up_12ma>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = + <0 RK_PA7 2 &pcfg_pull_up_12ma>, + <2 RK_PD4 2 &pcfg_pull_up_12ma>, + <2 RK_PD5 2 &pcfg_pull_up_12ma>, + <2 RK_PD6 2 &pcfg_pull_up_12ma>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = + <0 RK_PA7 2 &pcfg_pull_up_12ma>, + <2 RK_PD4 2 &pcfg_pull_up_12ma>, + <2 RK_PD5 2 &pcfg_pull_up_12ma>, + <2 RK_PD6 2 &pcfg_pull_up_12ma>, + <2 RK_PD7 2 &pcfg_pull_up_12ma>, + <3 RK_PC0 2 &pcfg_pull_up_12ma>, + <3 RK_PC1 2 &pcfg_pull_up_12ma>, + <3 RK_PC2 2 &pcfg_pull_up_12ma>; + }; + }; + + pwm0 { + pwm0_pin: pwm0-pin { + rockchip,pins = <2 RK_PA4 1 &pcfg_pull_none>; + }; + }; + + pwm1 { + pwm1_pin: pwm1-pin { + rockchip,pins = <2 RK_PA5 1 &pcfg_pull_none>; + }; + }; + + pwm2 { + pwm2_pin: pwm2-pin { + rockchip,pins = <2 RK_PA6 1 &pcfg_pull_none>; + }; + }; + + pwmir { + pwmir_pin: pwmir-pin { + rockchip,pins = <2 RK_PA2 1 &pcfg_pull_none>; + }; + }; + + gmac-1 { + rgmiim1_pins: rgmiim1-pins { + rockchip,pins = + /* mac_txclk */ + <1 RK_PB4 2 &pcfg_pull_none_12ma>, + /* mac_rxclk */ + <1 RK_PB5 2 &pcfg_pull_none_2ma>, + /* mac_mdio */ + <1 RK_PC3 2 &pcfg_pull_none_2ma>, + /* mac_txen */ + <1 RK_PD1 2 &pcfg_pull_none_12ma>, + /* mac_clk */ + <1 RK_PC5 2 &pcfg_pull_none_2ma>, + /* mac_rxdv */ + <1 RK_PC6 2 &pcfg_pull_none_2ma>, + /* mac_mdc */ + <1 RK_PC7 2 &pcfg_pull_none_2ma>, + /* mac_rxd1 */ + <1 RK_PB2 2 &pcfg_pull_none_2ma>, + /* mac_rxd0 */ + <1 RK_PB3 2 &pcfg_pull_none_2ma>, + /* mac_txd1 */ + <1 RK_PB0 2 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <1 RK_PB1 2 &pcfg_pull_none_12ma>, + /* mac_rxd3 */ + <1 RK_PB6 2 &pcfg_pull_none_2ma>, + /* mac_rxd2 */ + <1 RK_PB7 2 &pcfg_pull_none_2ma>, + /* mac_txd3 */ + <1 RK_PC0 2 &pcfg_pull_none_12ma>, + /* mac_txd2 */ + <1 RK_PC1 2 &pcfg_pull_none_12ma>, + + /* mac_txclk */ + <0 RK_PB0 1 &pcfg_pull_none>, + /* mac_txen */ + <0 RK_PB4 1 &pcfg_pull_none>, + /* mac_clk */ + <0 RK_PD0 1 &pcfg_pull_none>, + /* mac_txd1 */ + <0 RK_PC0 1 &pcfg_pull_none>, + /* mac_txd0 */ + <0 RK_PC1 1 &pcfg_pull_none>, + /* mac_txd3 */ + <0 RK_PC7 1 &pcfg_pull_none>, + /* mac_txd2 */ + <0 RK_PC6 1 &pcfg_pull_none>; + }; + + rmiim1_pins: rmiim1-pins { + rockchip,pins = + /* mac_mdio */ + <1 RK_PC3 2 &pcfg_pull_none_2ma>, + /* mac_txen */ + <1 RK_PD1 2 &pcfg_pull_none_12ma>, + /* mac_clk */ + <1 RK_PC5 2 &pcfg_pull_none_2ma>, + /* mac_rxer */ + <1 RK_PD0 2 &pcfg_pull_none_2ma>, + /* mac_rxdv */ + <1 RK_PC6 2 &pcfg_pull_none_2ma>, + /* mac_mdc */ + <1 RK_PC7 2 &pcfg_pull_none_2ma>, + /* mac_rxd1 */ + <1 RK_PB2 2 &pcfg_pull_none_2ma>, + /* mac_rxd0 */ + <1 RK_PB3 2 &pcfg_pull_none_2ma>, + /* mac_txd1 */ + <1 RK_PB0 2 &pcfg_pull_none_12ma>, + /* mac_txd0 */ + <1 RK_PB1 2 &pcfg_pull_none_12ma>, + + /* mac_mdio */ + <0 RK_PB3 1 &pcfg_pull_none>, + /* mac_txen */ + <0 RK_PB4 1 &pcfg_pull_none>, + /* mac_clk */ + <0 RK_PD0 1 &pcfg_pull_none>, + /* mac_mdc */ + <0 RK_PC3 1 &pcfg_pull_none>, + /* mac_txd1 */ + <0 RK_PC0 1 &pcfg_pull_none>, + /* mac_txd0 */ + <0 RK_PC1 1 &pcfg_pull_none>; + }; + }; + + gmac2phy { + fephyled_speed100: fephyled-speed100 { + rockchip,pins = <0 RK_PD7 1 &pcfg_pull_none>; + }; + + fephyled_speed10: fephyled-speed10 { + rockchip,pins = <0 RK_PD6 1 &pcfg_pull_none>; + }; + + fephyled_duplex: fephyled-duplex { + rockchip,pins = <0 RK_PD6 2 &pcfg_pull_none>; + }; + + fephyled_rxm0: fephyled-rxm0 { + rockchip,pins = <0 RK_PD5 1 &pcfg_pull_none>; + }; + + fephyled_txm0: fephyled-txm0 { + rockchip,pins = <0 RK_PD5 2 &pcfg_pull_none>; + }; + + fephyled_linkm0: fephyled-linkm0 { + rockchip,pins = <0 RK_PD4 1 &pcfg_pull_none>; + }; + + fephyled_rxm1: fephyled-rxm1 { + rockchip,pins = <2 RK_PD1 2 &pcfg_pull_none>; + }; + + fephyled_txm1: fephyled-txm1 { + rockchip,pins = <2 RK_PD1 3 &pcfg_pull_none>; + }; + + fephyled_linkm1: fephyled-linkm1 { + rockchip,pins = <2 RK_PD0 2 &pcfg_pull_none>; + }; + }; + + tsadc_pin { + tsadc_int: tsadc-int { + rockchip,pins = <2 RK_PB5 2 &pcfg_pull_none>; + }; + tsadc_gpio: tsadc-gpio { + rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hdmi_pin { + hdmi_cec: hdmi-cec { + rockchip,pins = <0 RK_PA3 1 &pcfg_pull_none>; + }; + + hdmi_hpd: hdmi-hpd { + rockchip,pins = <0 RK_PA4 1 &pcfg_pull_down>; + }; + }; + + cif-0 { + dvp_d2d9_m0:dvp-d2d9-m0 { + rockchip,pins = + /* cif_d0 */ + <3 RK_PA4 2 &pcfg_pull_none>, + /* cif_d1 */ + <3 RK_PA5 2 &pcfg_pull_none>, + /* cif_d2 */ + <3 RK_PA6 2 &pcfg_pull_none>, + /* cif_d3 */ + <3 RK_PA7 2 &pcfg_pull_none>, + /* cif_d4 */ + <3 RK_PB0 2 &pcfg_pull_none>, + /* cif_d5m0 */ + <3 RK_PB1 2 &pcfg_pull_none>, + /* cif_d6m0 */ + <3 RK_PB2 2 &pcfg_pull_none>, + /* cif_d7m0 */ + <3 RK_PB3 2 &pcfg_pull_none>, + /* cif_href */ + <3 RK_PA1 2 &pcfg_pull_none>, + /* cif_vsync */ + <3 RK_PA0 2 &pcfg_pull_none>, + /* cif_clkoutm0 */ + <3 RK_PA3 2 &pcfg_pull_none>, + /* cif_clkin */ + <3 RK_PA2 2 &pcfg_pull_none>; + }; + }; + + cif-1 { + dvp_d2d9_m1:dvp-d2d9-m1 { + rockchip,pins = + /* cif_d0 */ + <3 RK_PA4 2 &pcfg_pull_none>, + /* cif_d1 */ + <3 RK_PA5 2 &pcfg_pull_none>, + /* cif_d2 */ + <3 RK_PA6 2 &pcfg_pull_none>, + /* cif_d3 */ + <3 RK_PA7 2 &pcfg_pull_none>, + /* cif_d4 */ + <3 RK_PB0 2 &pcfg_pull_none>, + /* cif_d5m1 */ + <2 RK_PC0 4 &pcfg_pull_none>, + /* cif_d6m1 */ + <2 RK_PC1 4 &pcfg_pull_none>, + /* cif_d7m1 */ + <2 RK_PC2 4 &pcfg_pull_none>, + /* cif_href */ + <3 RK_PA1 2 &pcfg_pull_none>, + /* cif_vsync */ + <3 RK_PA0 2 &pcfg_pull_none>, + /* cif_clkoutm1 */ + <2 RK_PB7 4 &pcfg_pull_none>, + /* cif_clkin */ + <3 RK_PA2 2 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts index 8cdb3bff9c55..ff48edd8e348 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts +++ b/arch/arm64/boot/dts/rockchip/rk3368-px5-evb.dts @@ -53,7 +53,7 @@ }; memory@0 { - reg = <0x0 0x0 0x0 0x80000000>; + reg = <0x0 0x0 0x0 0x40000000>; device_type = "memory"; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi index a635adc47e74..6d5dc0587e59 100644 --- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi @@ -108,23 +108,10 @@ }; }; - idle-states { - entry-method = "psci"; - - cpu_sleep: cpu-sleep-0 { - compatible = "arm,idle-state"; - arm,psci-suspend-param = <0x1010000>; - entry-latency-us = <0x3fffffff>; - exit-latency-us = <0x40000000>; - min-residency-us = <0xffffffff>; - }; - }; - cpu_l0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x0>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -134,7 +121,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x1>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; }; @@ -142,7 +128,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x2>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; }; @@ -150,7 +135,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x3>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; }; @@ -158,7 +142,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x100>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; #cooling-cells = <2>; /* min followed by max */ @@ -168,7 +151,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x101>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; }; @@ -176,7 +158,6 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x102>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; }; @@ -184,11 +165,39 @@ device_type = "cpu"; compatible = "arm,cortex-a53", "arm,armv8"; reg = <0x0 0x103>; - cpu-idle-states = <&cpu_sleep>; enable-method = "psci"; }; }; + amba { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + + dmac_peri: dma-controller@ff250000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff250000 0x0 0x4000>; + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + clocks = <&cru ACLK_DMAC_PERI>; + clock-names = "apb_pclk"; + }; + + dmac_bus: dma-controller@ff600000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff600000 0x0 0x4000>; + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + arm,pl330-broken-no-flushp; + clocks = <&cru ACLK_DMAC_BUS>; + clock-names = "apb_pclk"; + }; + }; + arm-pmu { compatible = "arm,armv8-pmuv3"; interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, @@ -237,6 +246,8 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + resets = <&cru SRST_MMC0>; + reset-names = "reset"; status = "disabled"; }; @@ -249,6 +260,8 @@ clock-names = "biu", "ciu", "ciu_drv", "ciu_sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + resets = <&cru SRST_SDIO0>; + reset-names = "reset"; status = "disabled"; }; @@ -261,6 +274,8 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + resets = <&cru SRST_EMMC>; + reset-names = "reset"; status = "disabled"; }; @@ -631,6 +646,7 @@ clocks = <&cru PCLK_MAILBOX>; clock-names = "pclk_mailbox"; #mbox-cells = <1>; + status = "disabled"; }; pmugrf: syscon@ff738000 { @@ -684,6 +700,30 @@ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; }; + i2s_2ch: i2s-2ch@ff890000 { + compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff890000 0x0 0x1000>; + interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S_2CH>, <&cru HCLK_I2S_2CH>; + dmas = <&dmac_bus 6>, <&dmac_bus 7>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + i2s_8ch: i2s-8ch@ff898000 { + compatible = "rockchip,rk3368-i2s", "rockchip,rk3066-i2s"; + reg = <0x0 0xff898000 0x0 0x1000>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2s_clk", "i2s_hclk"; + clocks = <&cru SCLK_I2S_8CH>, <&cru HCLK_I2S_8CH>; + dmas = <&dmac_bus 0>, <&dmac_bus 1>; + dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_8ch_bus>; + status = "disabled"; + }; + gic: interrupt-controller@ffb71000 { compatible = "arm,gic-400"; interrupt-controller; @@ -886,6 +926,20 @@ }; }; + i2s { + i2s_8ch_bus: i2s-8ch-bus { + rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_none>, + <2 13 RK_FUNC_1 &pcfg_pull_none>, + <2 14 RK_FUNC_1 &pcfg_pull_none>, + <2 15 RK_FUNC_1 &pcfg_pull_none>, + <2 16 RK_FUNC_1 &pcfg_pull_none>, + <2 17 RK_FUNC_1 &pcfg_pull_none>, + <2 18 RK_FUNC_1 &pcfg_pull_none>, + <2 19 RK_FUNC_1 &pcfg_pull_none>, + <2 20 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + pwm0 { pwm0_pin: pwm0-pin { rockchip,pins = <3 8 RK_FUNC_2 &pcfg_pull_none>; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts new file mode 100644 index 000000000000..658bb9dc9dfd --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru-kevin.dts @@ -0,0 +1,306 @@ +/* + * Google Gru-Kevin Rev 6+ board device tree source + * + * Copyright 2016-2017 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3399-gru.dtsi" +#include <include/dt-bindings/input/linux-event-codes.h> + +/* + * Kevin-specific things + * + * Things in this section should use names from Kevin schematic since no + * equivalent exists in Gru schematic. If referring to signals that exist + * in Gru we use the Gru names, though. Confusing enough for you? + */ +/ { + model = "Google Kevin"; + compatible = "google,kevin-rev15", "google,kevin-rev14", + "google,kevin-rev13", "google,kevin-rev12", + "google,kevin-rev11", "google,kevin-rev10", + "google,kevin-rev9", "google,kevin-rev8", + "google,kevin-rev7", "google,kevin-rev6", + "google,kevin", "google,gru", "rockchip,rk3399"; + + /* Power tree */ + + p3_3v_dig: p3-3v-dig { + compatible = "regulator-fixed"; + regulator-name = "p3.3v_dig"; + pinctrl-names = "default"; + pinctrl-0 = <&cpu3_pen_pwr_en>; + + enable-active-high; + gpio = <&gpio4 30 GPIO_ACTIVE_HIGH>; + vin-supply = <&pp3300>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&cros_ec_pwm 1>; + brightness-levels = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 + 17 18 19 20 21 22 23 24 25 26 27 28 29 30 + 31 32 33 34 35 36 37 38 39 40 41 42 43 44 + 45 46 47 48 49 50 51 52 53 54 55 56 57 58 + 59 60 61 62 63 64 65 66 67 68 69 70 71 72 + 73 74 75 76 77 78 79 80 81 82 83 84 85 86 + 87 88 89 90 91 92 93 94 95 96 97 98 99 100>; + default-brightness-level = <51>; + enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; + power-supply = <&pp3300_disp>; + pinctrl-names = "default"; + pinctrl-0 = <&bl_en>; + pwm-delay-us = <10000>; + }; + + thermistor_ppvar_bigcpu: thermistor-ppvar-bigcpu { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <25500>; + pulldown-ohm = <0>; + io-channels = <&saradc 2>; + #thermal-sensor-cells = <0>; + }; + + thermistor_ppvar_litcpu: thermistor-ppvar-litcpu { + compatible = "murata,ncp15wb473"; + pullup-uv = <1800000>; + pullup-ohm = <25500>; + pulldown-ohm = <0>; + io-channels = <&saradc 3>; + #thermal-sensor-cells = <0>; + }; +}; + +&gpio_keys { + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>, <&cpu1_pen_eject>; + + pen-insert { + label = "Pen Insert"; + /* Insert = low, eject = high */ + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + linux,code = <SW_PEN_INSERTED>; + linux,input-type = <EV_SW>; + wakeup-source; + }; +}; + +&thermal_zones { + bigcpu_reg_thermal: bigcpu-reg-thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&thermistor_ppvar_bigcpu 0>; + sustainable-power = <4000>; + + ppvar_bigcpu_trips: trips { + ppvar_bigcpu_on: ppvar-bigcpu-on { + temperature = <40000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ppvar_bigcpu_alert: ppvar-bigcpu-alert { + temperature = <50000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ppvar_bigcpu_crit: ppvar-bigcpu-crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&ppvar_bigcpu_alert>; + cooling-device = + <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <4096>; + }; + map1 { + trip = <&ppvar_bigcpu_alert>; + cooling-device = + <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + contribution = <1024>; + }; + }; + }; + + litcpu_reg_thermal: litcpu-reg-thermal { + polling-delay-passive = <100>; /* milliseconds */ + polling-delay = <1000>; /* milliseconds */ + thermal-sensors = <&thermistor_ppvar_litcpu 0>; + sustainable-power = <4000>; + + ppvar_litcpu_trips: trips { + ppvar_litcpu_on: ppvar-litcpu-on { + temperature = <40000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ppvar_litcpu_alert: ppvar-litcpu-alert { + temperature = <50000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + ppvar_litcpu_crit: ppvar-litcpu-crit { + temperature = <90000>; /* millicelsius */ + hysteresis = <0>; /* millicelsius */ + type = "critical"; + }; + }; + }; +}; + +ap_i2c_tpm: &i2c0 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times. */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + tpm: tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + powered-while-suspended; + }; +}; + +ap_i2c_dig: &i2c2 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times. */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + digitizer: digitizer@9 { + /* wacom,w9013 */ + compatible = "hid-over-i2c"; + reg = <0x9>; + pinctrl-names = "default"; + pinctrl-0 = <&cpu1_dig_irq_l &cpu1_dig_pdct_l>; + + vdd-supply = <&p3_3v_dig>; + post-power-on-delay-ms = <100>; + + interrupt-parent = <&gpio2>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + + hid-descr-addr = <0x1>; + }; +}; + +/* Adjustments to things in the gru baseboard */ + +&ap_i2c_tp { + trackpad@4a { + compatible = "atmel,atmel_mxt_tp"; + reg = <0x4a>; + pinctrl-names = "default"; + pinctrl-0 = <&trackpad_int_l>; + interrupt-parent = <&gpio1>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +&ap_i2c_ts { + touchscreen@4b { + compatible = "atmel,atmel_mxt_ts"; + reg = <0x4b>; + pinctrl-names = "default"; + pinctrl-0 = <&touch_int_l>; + interrupt-parent = <&gpio3>; + interrupts = <13 IRQ_TYPE_LEVEL_LOW>; + }; +}; + +&saradc { + status = "okay"; + vref-supply = <&pp1800_ap_io>; +}; + +&mvl_wifi { + marvell,wakeup-pin = <14>; /* GPIO_14 on Marvell */ +}; + +&pinctrl { + digitizer { + /* Has external pullup */ + cpu1_dig_irq_l: cpu1-dig-irq-l { + rockchip,pins = <2 4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + /* Has external pullup */ + cpu1_dig_pdct_l: cpu1-dig-pdct-l { + rockchip,pins = <2 5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + discrete-regulators { + cpu3_pen_pwr_en: cpu3-pen-pwr-en { + rockchip,pins = <4 30 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pen { + cpu1_pen_eject: cpu1-pen-eject { + rockchip,pins = <0 13 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + wlan_host_wake_l: wlan-host-wake-l { + rockchip,pins = <0 8 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi new file mode 100644 index 000000000000..0d960b7f7625 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-gru.dtsi @@ -0,0 +1,1103 @@ +/* + * Google Gru (and derivatives) board device tree source + * + * Copyright 2016-2017 Google, Inc + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <dt-bindings/input/input.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + chosen { + stdout-path = "serial2:115200n8"; + }; + + /* + * Power Tree + * + * In general an attempt is made to include all rails called out by + * the schematic as long as those rails interact in some way with + * the AP. AKA: + * - Rails that only connect to the EC (or devices that the EC talks to) + * are not included. + * - Rails _are_ included if the rails go to the AP even if the AP + * doesn't currently care about them / they are always on. The idea + * here is that it makes it easier to map to the schematic or extend + * later. + * + * If two rails are substantially the same from the AP's point of + * view, though, we won't create a full fixed regulator. We'll just + * put the child rail as an alias of the parent rail. Sometimes rails + * look the same to the AP because one of these is true: + * - The EC controls the enable and the EC always enables a rail as + * long as the AP is running. + * - The rails are actually connected to each other by a jumper and + * the distinction is just there to add clarity/flexibility to the + * schematic. + */ + + ppvar_sys: ppvar-sys { + compatible = "regulator-fixed"; + regulator-name = "ppvar_sys"; + regulator-always-on; + regulator-boot-on; + }; + + pp900_ap: pp900-ap { + compatible = "regulator-fixed"; + regulator-name = "pp900_ap"; + + /* EC turns on w/ pp900_ap_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + pp1200_lpddr: pp1200-lpddr { + compatible = "regulator-fixed"; + regulator-name = "pp1200_lpddr"; + + /* EC turns on w/ lpddr_pwr_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + + vin-supply = <&ppvar_sys>; + }; + + pp1800: pp1800 { + compatible = "regulator-fixed"; + regulator-name = "pp1800"; + + /* Always on when ppvar_sys shows power good */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3000: pp3000 { + compatible = "regulator-fixed"; + regulator-name = "pp3000"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3000_en>; + + enable-active-high; + gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + vin-supply = <&ppvar_sys>; + }; + + pp3300: pp3300 { + compatible = "regulator-fixed"; + regulator-name = "pp3300"; + + /* Always on; plain and simple */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + vin-supply = <&ppvar_sys>; + }; + + pp5000: pp5000 { + compatible = "regulator-fixed"; + regulator-name = "pp5000"; + + /* EC turns on w/ pp5000_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + vin-supply = <&ppvar_sys>; + }; + + ppvar_bigcpu: ppvar-bigcpu { + compatible = "pwm-regulator"; + regulator-name = "ppvar_bigcpu"; + /* + * OVP circuit requires special handling which is not yet + * represented. Keep disabled for now. + */ + status = "disabled"; + + pwms = <&pwm1 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ap_core_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <798674>; + regulator-max-microvolt = <1302172>; + }; + + ppvar_litcpu: ppvar-litcpu { + compatible = "pwm-regulator"; + regulator-name = "ppvar_litcpu"; + /* + * OVP circuit requires special handling which is not yet + * represented. Keep disabled for now. + */ + status = "disabled"; + + pwms = <&pwm2 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ap_core_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <799065>; + regulator-max-microvolt = <1303738>; + }; + + ppvar_gpu: ppvar-gpu { + compatible = "pwm-regulator"; + regulator-name = "ppvar_gpu"; + /* + * OVP circuit requires special handling which is not yet + * represented. Keep disabled for now. + */ + status = "disabled"; + + pwms = <&pwm0 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ap_core_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <785782>; + regulator-max-microvolt = <1217729>; + }; + + ppvar_centerlogic: ppvar-centerlogic { + compatible = "pwm-regulator"; + regulator-name = "ppvar_centerlogic"; + /* + * OVP circuit requires special handling which is not yet + * represented. Keep disabled for now. + */ + status = "disabled"; + + pwms = <&pwm3 0 3337 0>; + pwm-supply = <&ppvar_sys>; + pwm-dutycycle-range = <100 0>; + pwm-dutycycle-unit = <100>; + + /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800069>; + regulator-max-microvolt = <1049692>; + }; + + /* Schematics call this PPVAR even though it's fixed */ + ppvar_logic: ppvar-logic { + compatible = "regulator-fixed"; + regulator-name = "ppvar_logic"; + + /* EC turns on w/ ppvar_logic_en; always on for AP */ + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + + vin-supply = <&ppvar_sys>; + }; + + /* EC turns on w/ pp900_ddrpll_en */ + pp900_ddrpll: pp900-ap { + }; + + /* EC turns on w/ pp900_pcie_en */ + pp900_pcie: pp900-ap { + }; + + /* EC turns on w/ pp900_pll_en */ + pp900_pll: pp900-ap { + }; + + /* EC turns on w/ pp900_pmu_en */ + pp900_pmu: pp900-ap { + }; + + /* EC turns on w/ pp900_usb_en */ + pp900_usb: pp900-ap { + }; + + /* EC turns on w/ pp1800_s0_en_l */ + pp1800_ap_io: pp1800_emmc: pp1800_nfc: pp1800_s0: pp1800 { + }; + + /* EC turns on w/ pp1800_avdd_en_l */ + pp1800_avdd: pp1800 { + }; + + /* EC turns on w/ pp1800_lid_en_l */ + pp1800_lid: pp1800_mic: pp1800 { + }; + + /* EC turns on w/ lpddr_pwr_en */ + pp1800_lpddr: pp1800 { + }; + + /* EC turns on w/ pp1800_pmu_en_l */ + pp1800_pmu: pp1800 { + }; + + /* EC turns on w/ pp1800_usb_en_l */ + pp1800_usb: pp1800 { + }; + + pp1500_ap_io: pp1500-ap-io { + compatible = "regulator-fixed"; + regulator-name = "pp1500_ap_io"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1500_en>; + + enable-active-high; + gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + + vin-supply = <&pp1800>; + }; + + pp1800_audio: pp1800-audio { + compatible = "regulator-fixed"; + regulator-name = "pp1800_audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pp1800_audio_en>; + + enable-active-high; + gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; + + regulator-always-on; + regulator-boot-on; + + vin-supply = <&pp1800>; + }; + + /* gpio is shared with pp3300_wifi_bt */ + pp1800_pcie: pp1800-pcie { + compatible = "regulator-fixed"; + regulator-name = "pp1800_pcie"; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_module_pd_l>; + + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + /* + * Need to wait 1ms + ramp-up time before we can power on WiFi. + * This has been approximated as 8ms total. + */ + regulator-enable-ramp-delay = <8000>; + + vin-supply = <&pp1800>; + }; + + /* + * This is a bit of a hack. The WiFi module should be reset at least + * 1ms after its regulators have ramped up (max rampup time is ~7ms). + * With some stretching of the imagination, we can call the 1.8V + * regulator a supply. + */ + wlan_pd_n: wlan-pd-n { + compatible = "regulator-fixed"; + regulator-name = "wlan_pd_n"; + + /* Note the wlan_module_reset_l pinctrl */ + enable-active-high; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp1800_pcie>; + }; + + /* Always on; plain and simple */ + pp3000_ap: pp3000_emmc: pp3000 { + }; + + pp3000_sd_slot: pp3000-sd-slot { + compatible = "regulator-fixed"; + regulator-name = "pp3000_sd_slot"; + pinctrl-names = "default"; + pinctrl-0 = <&sd_slot_pwr_en>; + + enable-active-high; + gpio = <&gpio4 29 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp3000>; + }; + + /* + * Technically, this is a small abuse of 'regulator-gpio'; this + * regulator is a mux between pp1800 and pp3300. pp1800 and pp3300 are + * always on though, so it is sufficient to simply control the mux + * here. + */ + ppvar_sd_card_io: ppvar-sd-card-io { + compatible = "regulator-gpio"; + regulator-name = "ppvar_sd_card_io"; + pinctrl-names = "default"; + pinctrl-0 = <&sd_io_pwr_en &sd_pwr_1800_sel>; + + enable-active-high; + enable-gpio = <&gpio2 2 GPIO_ACTIVE_HIGH>; + gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>; + states = <1800000 0x1 + 3000000 0x0>; + + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + /* EC turns on w/ pp3300_trackpad_en_l */ + pp3300_trackpad: pp3300-trackpad { + }; + + /* EC turns on w/ pp3300_usb_en_l */ + pp3300_usb: pp3300 { + }; + + pp3300_disp: pp3300-disp { + compatible = "regulator-fixed"; + regulator-name = "pp3300_disp"; + pinctrl-names = "default"; + pinctrl-0 = <&pp3300_disp_en>; + + enable-active-high; + gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; + + startup-delay-us = <2000>; + vin-supply = <&pp3300>; + }; + + /* gpio is shared with pp1800_pcie and pinctrl is set there */ + pp3300_wifi_bt: pp3300-wifi-bt { + compatible = "regulator-fixed"; + regulator-name = "pp3300_wifi_bt"; + + enable-active-high; + gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; + + vin-supply = <&pp3300>; + }; + + /* EC turns on w/ usb_a_en */ + pp5000_usb_a_vbus: pp5000 { + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l>; + + wake-on-bt { + label = "Wake-on-Bluetooth"; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_WAKEUP>; + wakeup-source; + }; + }; + + max98357a: max98357a { + compatible = "maxim,max98357a"; + pinctrl-names = "default"; + pinctrl-0 = <&sdmode_en>; + sdmode-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + sdmode-delay = <2>; + #sound-dai-cells = <0>; + status = "okay"; + }; + + sound { + compatible = "rockchip,rk3399-gru-sound"; + rockchip,cpu = <&i2s0 &i2s2>; + rockchip,codec = <&max98357a &headsetcodec &codec>; + }; +}; + +/* + * Set some suspend operating points to avoid OVP in suspend + * + * When we go into S3 ARM Trusted Firmware will transition our PWM regulators + * from wherever they're at back to the "default" operating point (whatever + * voltage we get when we set the PWM pins to "input"). + * + * This quick transition under light load has the possibility to trigger the + * regulator "over voltage protection" (OVP). + * + * To make extra certain that we don't hit this OVP at suspend time, we'll + * transition to a voltage that's much closer to the default (~1.0 V) so that + * there will not be a big jump. Technically we only need to get within 200 mV + * of the default voltage, but the speed here should be fast enough and we need + * suspend/resume to be rock solid. + */ + +&cluster0_opp { + opp05 { + opp-suspend; + }; +}; + +&cluster1_opp { + opp06 { + opp-suspend; + }; +}; + +&cpu_l0 { + cpu-supply = <&ppvar_litcpu>; +}; + +&cpu_l1 { + cpu-supply = <&ppvar_litcpu>; +}; + +&cpu_l2 { + cpu-supply = <&ppvar_litcpu>; +}; + +&cpu_l3 { + cpu-supply = <&ppvar_litcpu>; +}; + +&cpu_b0 { + cpu-supply = <&ppvar_bigcpu>; +}; + +&cpu_b1 { + cpu-supply = <&ppvar_bigcpu>; +}; + + +&cru { + assigned-clocks = + <&cru PLL_GPLL>, <&cru PLL_CPLL>, + <&cru PLL_NPLL>, + <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>, + <&cru PCLK_PERIHP>, + <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, + <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, + <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>; + assigned-clock-rates = + <600000000>, <800000000>, + <1000000000>, + <150000000>, <75000000>, + <37500000>, + <100000000>, <100000000>, + <50000000>, <800000000>, + <100000000>, <50000000>; +}; + +&emmc_phy { + status = "okay"; +}; + +ap_i2c_mic: &i2c1 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + headsetcodec: rt5514@57 { + compatible = "realtek,rt5514"; + reg = <0x57>; + interrupt-parent = <&gpio1>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mic_int>; + realtek,dmic-init-delay = <20>; + wakeup-source; + }; +}; + +ap_i2c_ts: &i2c3 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; +}; + +ap_i2c_tp: &i2c5 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + /* + * Note strange pullup enable. Apparently this avoids leakage but + * still allows us to get nice 4.7K pullups for high speed i2c + * transfers. Basically we want the pullup on whenever the ap is + * alive, so the "en" pin just gets set to output high. + */ + pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>; +}; + +ap_i2c_audio: &i2c8 { + status = "okay"; + + clock-frequency = <400000>; + + /* These are relatively safe rise/fall times */ + i2c-scl-falling-time-ns = <50>; + i2c-scl-rising-time-ns = <300>; + + codec: da7219@1a { + compatible = "dlg,da7219"; + reg = <0x1a>; + interrupt-parent = <&gpio1>; + interrupts = <23 IRQ_TYPE_LEVEL_LOW>; + clocks = <&cru SCLK_I2S_8CH_OUT>; + clock-names = "mclk"; + dlg,micbias-lvl = <2600>; + dlg,mic-amp-in-sel = "diff"; + pinctrl-names = "default"; + pinctrl-0 = <&headset_int_l>; + VDD-supply = <&pp1800>; + VDDMIC-supply = <&pp3300>; + VDDIO-supply = <&pp1800>; + + da7219_aad { + dlg,adc-1bit-rpt = <1>; + dlg,btn-avg = <4>; + dlg,btn-cfg = <50>; + dlg,mic-det-thr = <500>; + dlg,jack-ins-deb = <20>; + dlg,jack-det-rate = "32ms_64ms"; + dlg,jack-rem-deb = <1>; + + dlg,a-d-btn-thr = <0xa>; + dlg,d-b-btn-thr = <0x16>; + dlg,b-c-btn-thr = <0x21>; + dlg,c-mic-btn-thr = <0x3E>; + }; + }; +}; + +&i2s0 { + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + audio-supply = <&pp1800_audio>; /* APIO5_VDD; 3d 4a */ + bt656-supply = <&pp1800_ap_io>; /* APIO2_VDD; 2a 2b */ + gpio1830-supply = <&pp3000_ap>; /* APIO4_VDD; 4c 4d */ + sdmmc-supply = <&ppvar_sd_card_io>; /* SDMMC0_VDD; 4b */ +}; + +&pcie0 { + status = "okay"; + + ep-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_clkreqn_cpm>, <&wifi_perst_l>; + vpcie3v3-supply = <&pp3300_wifi_bt>; + vpcie1v8-supply = <&wlan_pd_n>; /* HACK: see &wlan_pd_n */ + vpcie0v9-supply = <&pp900_pcie>; + + pci_rootport: pcie@0,0 { + reg = <0x83000000 0x0 0x00000000 0x0 0x00000000>; + #address-cells = <3>; + #size-cells = <2>; + ranges; + + mvl_wifi: wifi@0,0 { + compatible = "pci1b4b,2b42"; + reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 + 0x83010000 0x0 0x00100000 0x0 0x00100000>; + interrupt-parent = <&gpio0>; + interrupts = <8 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&wlan_host_wake_l>; + wakeup-source; + }; + }; +}; + +&pcie_phy { + status = "okay"; +}; + +&pmu_io_domains { + status = "okay"; + + pmu1830-supply = <&pp1800_pmu>; /* PMUIO2_VDD */ +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&pwm3 { + status = "okay"; +}; + +&sdhci { + /* + * Signal integrity isn't great at 200 MHz and 150 MHz (DDR) gives the + * same (or nearly the same) performance for all eMMC that are intended + * to be used. + */ + assigned-clock-rates = <150000000>; + + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&sdmmc { + status = "okay"; + + /* + * Note: configure "sdmmc_cd" as card detect even though it's actually + * hooked to ground. Because we specified "cd-gpios" below dw_mmc + * should be ignoring card detect anyway. Specifying the pin as + * sdmmc_cd means that even if you've got GRF_SOC_CON7[12] (force_jtag) + * turned on that the system will still make sure the port is + * configured as SDMMC and not JTAG. + */ + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_cd_gpio + &sdmmc_bus4>; + + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio4 24 GPIO_ACTIVE_LOW>; + disable-wp; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&pp3000_sd_slot>; + vqmmc-supply = <&ppvar_sd_card_io>; +}; + +&spi1 { + status = "okay"; + + pinctrl-names = "default", "sleep"; + pinctrl-1 = <&spi1_sleep>; + + spiflash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + + /* May run faster once verified. */ + spi-max-frequency = <10000000>; + }; +}; + +&spi2 { + status = "okay"; + + wacky_spi_audio: spi2@0 { + compatible = "realtek,rt5514"; + reg = <0>; + + /* May run faster once verified. */ + spi-max-frequency = <10000000>; + }; +}; + +&spi5 { + status = "okay"; + + cros_ec: ec@0 { + compatible = "google,cros-ec-spi"; + reg = <0>; + interrupt-parent = <&gpio0>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_ap_int_l>; + spi-max-frequency = <3000000>; + + i2c_tunnel: i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + google,remote-bus = <4>; + #address-cells = <1>; + #size-cells = <0>; + }; + + cros_ec_pwm: ec-pwm { + compatible = "google,cros-ec-pwm"; + #pwm-cells = <1>; + }; + }; +}; + +&tsadc { + status = "okay"; + + rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-polarity = <1>; /* tshut polarity 0:LOW 1:HIGH */ +}; + +&u2phy0 { + status = "okay"; +}; + +&u2phy1 { + status = "okay"; +}; + +&u2phy0_host { + status = "okay"; +}; + +&u2phy1_host { + status = "okay"; +}; + +&u2phy0_otg { + status = "okay"; +}; + +&u2phy1_otg { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "host"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +#include <arm/cros-ec-keyboard.dtsi> +#include <arm/cros-ec-sbs.dtsi> + +&pinctrl { + /* + * pinctrl settings for pins that have no real owners. + * + * At the moment settings are identical for S0 and S3, but if we later + * need to configure things differently for S3 we'll adjust here. + */ + pinctrl-names = "default"; + pinctrl-0 = < + &ap_pwroff /* AP will auto-assert this when in S3 */ + &clk_32k /* This pin is always 32k on gru boards */ + + /* + * We want this driven low ASAP; firmware should help us, but + * we can help ourselves too. + */ + &wlan_module_reset_l + >; + + pcfg_output_low: pcfg-output-low { + output-low; + }; + + pcfg_output_high: pcfg-output-high { + output-high; + }; + + pcfg_pull_none_8ma: pcfg-pull-none-8ma { + bias-disable; + drive-strength = <8>; + }; + + backlight-enable { + bl_en: bl-en { + rockchip,pins = <1 17 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + cros-ec { + ec_ap_int_l: ec-ap-int-l { + rockchip,pins = <RK_GPIO0 1 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + discrete-regulators { + pp1500_en: pp1500-en { + rockchip,pins = <RK_GPIO0 10 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + pp1800_audio_en: pp1800-audio-en { + rockchip,pins = <RK_GPIO0 2 RK_FUNC_GPIO + &pcfg_pull_down>; + }; + + pp3300_disp_en: pp3300-disp-en { + rockchip,pins = <RK_GPIO4 27 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + pp3000_en: pp3000-en { + rockchip,pins = <RK_GPIO0 12 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + sd_io_pwr_en: sd-io-pwr-en { + rockchip,pins = <RK_GPIO2 2 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + sd_pwr_1800_sel: sd-pwr-1800-sel { + rockchip,pins = <RK_GPIO2 28 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + sd_slot_pwr_en: sd-slot-pwr-en { + rockchip,pins = <RK_GPIO4 29 RK_FUNC_GPIO + &pcfg_pull_none>; + }; + + wlan_module_pd_l: wlan-module-pd-l { + rockchip,pins = <RK_GPIO0 4 RK_FUNC_GPIO + &pcfg_pull_down>; + }; + }; + + codec { + /* Has external pullup */ + headset_int_l: headset-int-l { + rockchip,pins = <1 23 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + mic_int: mic-int { + rockchip,pins = <1 13 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + max98357a { + sdmode_en: sdmode-en { + rockchip,pins = <1 2 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + pcie { + pcie_clkreqn_cpm: pci-clkreqn-cpm { + /* + * Since our pcie doesn't support ClockPM(CPM), we want + * to hack this as gpio, so the EP could be able to + * de-assert it along and make ClockPM(CPM) work. + */ + rockchip,pins = <2 26 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdmmc { + /* + * We run sdmmc at max speed; bump up drive strength. + * We also have external pulls, so disable the internal ones. + */ + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = + <4 8 RK_FUNC_1 &pcfg_pull_none_8ma>, + <4 9 RK_FUNC_1 &pcfg_pull_none_8ma>, + <4 10 RK_FUNC_1 &pcfg_pull_none_8ma>, + <4 11 RK_FUNC_1 &pcfg_pull_none_8ma>; + }; + + sdmmc_clk: sdmmc-clk { + rockchip,pins = + <4 12 RK_FUNC_1 &pcfg_pull_none_8ma>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = + <4 13 RK_FUNC_1 &pcfg_pull_none_8ma>; + }; + + /* + * In our case the official card detect is hooked to ground + * to avoid getting access to JTAG just by sticking something + * in the SD card slot (see the force_jtag bit in the TRM). + * + * We still configure it as card detect because it doesn't + * hurt and dw_mmc will ignore it. We make sure to disable + * the pull though so we don't burn needless power. + */ + sdmmc_cd: sdmcc-cd { + rockchip,pins = + <0 7 RK_FUNC_1 &pcfg_pull_none>; + }; + + /* This is where we actually hook up CD; has external pull */ + sdmmc_cd_gpio: sdmmc-cd-gpio { + rockchip,pins = <4 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + spi1 { + spi1_sleep: spi1-sleep { + /* + * Pull down SPI1 CLK/CS/RX/TX during suspend, to + * prevent leakage. + */ + rockchip,pins = <1 9 RK_FUNC_GPIO &pcfg_pull_down>, + <1 10 RK_FUNC_GPIO &pcfg_pull_down>, + <1 7 RK_FUNC_GPIO &pcfg_pull_down>, + <1 8 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + touchscreen { + touch_int_l: touch-int-l { + rockchip,pins = <3 13 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + touch_reset_l: touch-reset-l { + rockchip,pins = <4 26 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + trackpad { + ap_i2c_tp_pu_en: ap-i2c-tp-pu-en { + rockchip,pins = <3 12 RK_FUNC_GPIO &pcfg_output_high>; + }; + + trackpad_int_l: trackpad-int-l { + rockchip,pins = <1 4 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + wifi { + wifi_perst_l: wifi-perst-l { + rockchip,pins = <2 27 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wlan_module_reset_l: wlan-module-reset-l { + /* + * We want this driven low ASAP (As {Soon,Strongly} As + * Possible), to avoid leakage through the powered-down + * WiFi. + */ + rockchip,pins = <1 11 RK_FUNC_GPIO &pcfg_output_low>; + }; + + bt_host_wake_l: bt-host-wake-l { + /* Kevin has an external pull up, but Gru does not */ + rockchip,pins = <0 3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + write-protect { + ap_fw_wp: ap-fw-wp { + rockchip,pins = <1 18 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi new file mode 100644 index 000000000000..dd82e16236a8 --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-opp.dtsi @@ -0,0 +1,145 @@ +/* + * Copyright (c) 2016-2017 Fuzhou Rockchip Electronics Co., Ltd + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/ { + cluster0_opp: opp-table0 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <800000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <800000>; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <875000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <925000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1050000>; + }; + opp06 { + opp-hz = /bits/ 64 <1512000000>; + opp-microvolt = <1125000>; + }; + }; + + cluster1_opp: opp-table1 { + compatible = "operating-points-v2"; + opp-shared; + + opp00 { + opp-hz = /bits/ 64 <408000000>; + opp-microvolt = <800000>; + clock-latency-ns = <40000>; + }; + opp01 { + opp-hz = /bits/ 64 <600000000>; + opp-microvolt = <800000>; + }; + opp02 { + opp-hz = /bits/ 64 <816000000>; + opp-microvolt = <825000>; + }; + opp03 { + opp-hz = /bits/ 64 <1008000000>; + opp-microvolt = <875000>; + }; + opp04 { + opp-hz = /bits/ 64 <1200000000>; + opp-microvolt = <950000>; + }; + opp05 { + opp-hz = /bits/ 64 <1416000000>; + opp-microvolt = <1025000>; + }; + opp06 { + opp-hz = /bits/ 64 <1608000000>; + opp-microvolt = <1075000>; + }; + opp07 { + opp-hz = /bits/ 64 <1800000000>; + opp-microvolt = <1150000>; + }; + opp08 { + opp-hz = /bits/ 64 <2016000000>; + opp-microvolt = <1250000>; + }; + }; +}; + +&cpu_l0 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l1 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l2 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_l3 { + operating-points-v2 = <&cluster0_opp>; +}; + +&cpu_b0 { + operating-points-v2 = <&cluster1_opp>; +}; + +&cpu_b1 { + operating-points-v2 = <&cluster1_opp>; +}; diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 8e6d1bdeb9c3..f4f3c96c798d 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -211,6 +211,51 @@ }; }; + pcie0: pcie@f8000000 { + compatible = "rockchip,rk3399-pcie"; + reg = <0x0 0xf8000000 0x0 0x2000000>, + <0x0 0xfd000000 0x0 0x1000000>; + reg-names = "axi-base", "apb-base"; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + aspm-no-l0s; + bus-range = <0x0 0x1>; + clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, + <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; + clock-names = "aclk", "aclk-perf", + "hclk", "pm"; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>, + <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>; + interrupt-names = "sys", "legacy", "client"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie0_intc 0>, + <0 0 0 2 &pcie0_intc 1>, + <0 0 0 3 &pcie0_intc 2>, + <0 0 0 4 &pcie0_intc 3>; + linux,pci-domain = <0>; + max-link-speed = <1>; + msi-map = <0x0 &its 0x0 0x1000>; + phys = <&pcie_phy>; + phy-names = "pcie-phy"; + ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 + 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; + resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, + <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, + <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, + <&cru SRST_A_PCIE>; + reset-names = "core", "mgmt", "mgmt-sticky", "pipe", + "pm", "pclk", "aclk"; + status = "disabled"; + + pcie0_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + gmac: ethernet@fe300000 { compatible = "rockchip,rk3399-gmac"; reg = <0x0 0xfe300000 0x0 0x10000>; @@ -241,6 +286,8 @@ <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; + resets = <&cru SRST_SDIO0>; + reset-names = "reset"; status = "disabled"; }; @@ -255,6 +302,8 @@ clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; fifo-depth = <0x100>; power-domains = <&power RK3399_PD_SD>; + resets = <&cru SRST_SDMMC>; + reset-names = "reset"; status = "disabled"; }; @@ -275,50 +324,6 @@ status = "disabled"; }; - pcie0: pcie@f8000000 { - compatible = "rockchip,rk3399-pcie"; - reg = <0x0 0xf8000000 0x0 0x2000000>, - <0x0 0xfd000000 0x0 0x1000000>; - reg-names = "axi-base", "apb-base"; - #address-cells = <3>; - #size-cells = <2>; - #interrupt-cells = <1>; - aspm-no-l0s; - bus-range = <0x0 0x1>; - clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, - <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; - clock-names = "aclk", "aclk-perf", - "hclk", "pm"; - interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>, - <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>; - interrupt-names = "sys", "legacy", "client"; - interrupt-map-mask = <0 0 0 7>; - interrupt-map = <0 0 0 1 &pcie0_intc 0>, - <0 0 0 2 &pcie0_intc 1>, - <0 0 0 3 &pcie0_intc 2>, - <0 0 0 4 &pcie0_intc 3>; - max-link-speed = <1>; - msi-map = <0x0 &its 0x0 0x1000>; - phys = <&pcie_phy>; - phy-names = "pcie-phy"; - ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 - 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; - resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, - <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>, - <&cru SRST_PCIE_PM>, <&cru SRST_P_PCIE>, - <&cru SRST_A_PCIE>; - reset-names = "core", "mgmt", "mgmt-sticky", "pipe", - "pm", "pclk", "aclk"; - status = "disabled"; - - pcie0_intc: interrupt-controller { - interrupt-controller; - #address-cells = <0>; - #interrupt-cells = <1>; - }; - }; - usb_host0_ehci: usb@fe380000 { compatible = "generic-ehci"; reg = <0x0 0xfe380000 0x0 0x20000>; @@ -371,6 +376,60 @@ status = "disabled"; }; + usbdrd3_0: usb@fe800000 { + compatible = "rockchip,rk3399-dwc3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, + <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "grf_clk"; + status = "disabled"; + + usbdrd_dwc3_0: dwc3 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe800000 0x0 0x100000>; + interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; + dr_mode = "otg"; + phys = <&u2phy0_otg>; + phy-names = "usb2-phy"; + phy_type = "utmi_wide"; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis_u2_susphy_quirk; + snps,dis-del-phy-power-chg-quirk; + status = "disabled"; + }; + }; + + usbdrd3_1: usb@fe900000 { + compatible = "rockchip,rk3399-dwc3"; + #address-cells = <2>; + #size-cells = <2>; + ranges; + clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, + <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_GRF>; + clock-names = "ref_clk", "suspend_clk", + "bus_clk", "grf_clk"; + status = "disabled"; + + usbdrd_dwc3_1: dwc3 { + compatible = "snps,dwc3"; + reg = <0x0 0xfe900000 0x0 0x100000>; + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; + dr_mode = "otg"; + phys = <&u2phy1_otg>; + phy-names = "usb2-phy"; + phy_type = "utmi_wide"; + snps,dis_enblslpm_quirk; + snps,dis-u2-freeclk-exists-quirk; + snps,dis_u2_susphy_quirk; + snps,dis-del-phy-power-chg-quirk; + status = "disabled"; + }; + }; + gic: interrupt-controller@fee00000 { compatible = "arm,gic-v3"; #interrupt-cells = <4>; diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts index 7168cf818ad8..0173e93ab141 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-ref.dts @@ -52,11 +52,6 @@ model = "UniPhier LD11 Reference Board"; compatible = "socionext,uniphier-ld11-ref", "socionext,uniphier-ld11"; - memory { - device_type = "memory"; - reg = <0 0x80000000 0 0x40000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -73,6 +68,11 @@ i2c4 = &i2c4; i2c5 = &i2c5; }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x40000000>; + }; }; ðsc { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi index da881f5b6ed4..151c043b4835 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld11.dtsi @@ -140,7 +140,7 @@ <1 10 4>; }; - soc { + soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -304,6 +304,8 @@ compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; bus-width = <8>; mmc-ddr-1_8v; @@ -318,7 +320,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0>; clocks = <&mio_clk 7>, <&mio_clk 8>, <&mio_clk 12>; - resets = <&mio_rst 7>, <&mio_rst 8>, <&mio_rst 12>, <&sys_rst 8>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 8>, + <&mio_rst 12>; }; usb1: usb@5a810100 { @@ -329,7 +332,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1>; clocks = <&mio_clk 7>, <&mio_clk 9>, <&mio_clk 13>; - resets = <&mio_rst 7>, <&mio_rst 9>, <&mio_rst 13>, <&sys_rst 8>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 9>, + <&mio_rst 13>; }; usb2: usb@5a820100 { @@ -340,7 +344,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb2>; clocks = <&mio_clk 7>, <&mio_clk 10>, <&mio_clk 14>; - resets = <&mio_rst 7>, <&mio_rst 10>, <&mio_rst 14>, <&sys_rst 8>; + resets = <&sys_rst 8>, <&mio_rst 7>, <&mio_rst 10>, + <&mio_rst 14>; }; mioctrl@5b3e0000 { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts index 609162a1a322..fca4c479b469 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-ref.dts @@ -52,11 +52,6 @@ model = "UniPhier LD20 Reference Board"; compatible = "socionext,uniphier-ld20-ref", "socionext,uniphier-ld20"; - memory { - device_type = "memory"; - reg = <0 0x80000000 0 0xc0000000>; - }; - chosen { stdout-path = "serial0:115200n8"; }; @@ -73,6 +68,11 @@ i2c4 = &i2c4; i2c5 = &i2c5; }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0xc0000000>; + }; }; ðsc { diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi index a6b3a70dae83..6193f11acb78 100644 --- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi +++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi @@ -209,7 +209,7 @@ <1 10 4>; }; - soc { + soc@0 { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <1>; @@ -378,6 +378,8 @@ compatible = "socionext,uniphier-sd4hc", "cdns,sd4hc"; reg = <0x5a000000 0x400>; interrupts = <0 78 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emmc>; clocks = <&sys_clk 4>; bus-width = <8>; mmc-ddr-1_8v; diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts index e164ff6de5fc..bb900d2bbcfb 100644 --- a/arch/arm64/boot/dts/zte/zx296718-evb.dts +++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts @@ -57,6 +57,34 @@ reg = <0x40000000 0x40000000>; }; + sound0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "zx_snd_spdif0"; + + simple-audio-card,cpu { + sound-dai = <&spdif0>; + }; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + }; +}; + +&emmc { + status = "okay"; +}; + +&hdmi { + status = "okay"; +}; + +&sd1 { + status = "okay"; +}; + +&spdif0 { + status = "okay"; }; &uart0 { diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi index b850b2cd0adc..316dc713268c 100644 --- a/arch/arm64/boot/dts/zte/zx296718.dtsi +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -235,13 +235,6 @@ clock-output-names = "pll_mac"; }; - pll_vga: clk-pll-1073m { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <1073000000>; - clock-output-names = "pll_vga"; - }; - pll_mm0: clk-pll-1188m { compatible = "fixed-clock"; #clock-cells = <0>; @@ -305,6 +298,51 @@ status = "disabled"; }; + sd0: mmc@1110000 { + compatible = "zte,zx296718-dw-mshc"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x01110000 0x1000>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + fifo-depth = <32>; + data-addr = <0x200>; + fifo-watermark-aligned; + bus-width = <4>; + clock-frequency = <50000000>; + clocks = <&topcrm SD0_AHB>, <&topcrm SD0_WCLK>; + clock-names = "biu", "ciu"; + num-slots = <1>; + max-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + sd-uhs-ddr50; + status = "disabled"; + }; + + sd1: mmc@1111000 { + compatible = "zte,zx296718-dw-mshc"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x01111000 0x1000>; + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + fifo-depth = <32>; + data-addr = <0x200>; + fifo-watermark-aligned; + bus-width = <4>; + clock-frequency = <167000000>; + clocks = <&topcrm SD1_AHB>, <&topcrm SD1_WCLK>; + clock-names = "biu", "ciu"; + num-slots = <1>; + max-frequency = <167000000>; + cap-sdio-irq; + cap-sd-highspeed; + status = "disabled"; + }; + dma: dma-controller@1460000 { compatible = "zte,zx296702-dma"; reg = <0x01460000 0x1000>; @@ -328,6 +366,47 @@ #clock-cells = <1>; }; + vou: vou@1440000 { + compatible = "zte,zx296718-vou"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x1440000 0x10000>; + + dpc: dpc@0 { + compatible = "zte,zx296718-dpc"; + reg = <0x0000 0x1000>, <0x1000 0x1000>, + <0x5000 0x1000>, <0x6000 0x1000>, + <0xa000 0x1000>; + reg-names = "osd", "timing_ctrl", + "dtrc", "vou_ctrl", + "otfppu"; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&topcrm VOU_ACLK>, <&topcrm VOU_PPU_WCLK>, + <&topcrm VOU_MAIN_WCLK>, <&topcrm VOU_AUX_WCLK>; + clock-names = "aclk", "ppu_wclk", + "main_wclk", "aux_wclk"; + }; + + hdmi: hdmi@c000 { + compatible = "zte,zx296718-hdmi"; + reg = <0xc000 0x4000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_EDGE_RISING>; + clocks = <&topcrm HDMI_OSC_CEC>, + <&topcrm HDMI_OSC_CLK>, + <&topcrm HDMI_XCLK>; + clock-names = "osc_cec", "osc_clk", "xclk"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + tvenc: tvenc@2000 { + compatible = "zte,zx296718-tvenc"; + reg = <0x2000 0x1000>; + zte,tvenc-power-control = <&sysctrl 0x170 0x10>; + status = "disabled"; + }; + }; + topcrm: clock-controller@1461000 { compatible = "zte,zx296718-topcrm"; reg = <0x01461000 0x1000>; @@ -339,10 +418,43 @@ reg = <0x1463000 0x1000>; }; + emmc: mmc@1470000{ + compatible = "zte,zx296718-dw-mshc"; + reg = <0x01470000 0x1000>; + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>; + zte,aon-syscon = <&aon_sysctrl>; + bus-width = <8>; + fifo-depth = <128>; + data-addr = <0x200>; + fifo-watermark-aligned; + clock-frequency = <167000000>; + clocks = <&topcrm EMMC_NAND_AHB>, <&topcrm EMMC_WCLK>; + clock-names = "biu", "ciu"; + max-frequency = <167000000>; + cap-mmc-highspeed; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + non-removable; + disable-wp; + status = "disabled"; + }; + audiocrm: clock-controller@1480000 { compatible = "zte,zx296718-audiocrm"; reg = <0x01480000 0x1000>; #clock-cells = <1>; }; + + spdif0: spdif@1488000 { + compatible = "zte,zx296702-spdif"; + reg = <0x1488000 0x1000>; + clocks = <&audiocrm AUDIO_SPDIF0_WCLK>; + clock-names = "tx"; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + #sound-dai-cells = <0>; + dmas = <&dma 30>; + dma-names = "tx"; + status = "disabled"; + }; }; }; diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h index f21fd3894370..e7705e7bb07b 100644 --- a/arch/arm64/include/asm/kvm_host.h +++ b/arch/arm64/include/asm/kvm_host.h @@ -30,8 +30,7 @@ #define __KVM_HAVE_ARCH_INTC_INITIALIZED -#define KVM_USER_MEM_SLOTS 32 -#define KVM_PRIVATE_MEM_SLOTS 4 +#define KVM_USER_MEM_SLOTS 512 #define KVM_COALESCED_MMIO_PAGE_OFFSET 1 #define KVM_HALT_POLL_NS_DEFAULT 500000 diff --git a/arch/arm64/include/asm/pgtable-types.h b/arch/arm64/include/asm/pgtable-types.h index 69b2fd41503c..345a072b5856 100644 --- a/arch/arm64/include/asm/pgtable-types.h +++ b/arch/arm64/include/asm/pgtable-types.h @@ -55,9 +55,13 @@ typedef struct { pteval_t pgprot; } pgprot_t; #define __pgprot(x) ((pgprot_t) { (x) } ) #if CONFIG_PGTABLE_LEVELS == 2 +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #elif CONFIG_PGTABLE_LEVELS == 3 +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopud.h> +#elif CONFIG_PGTABLE_LEVELS == 4 +#include <asm-generic/5level-fixup.h> #endif #endif /* __ASM_PGTABLE_TYPES_H */ diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c index 1bfe30dfbfe7..fa1b18e364fc 100644 --- a/arch/arm64/kvm/handle_exit.c +++ b/arch/arm64/kvm/handle_exit.c @@ -135,7 +135,19 @@ static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu, struct kvm_run *run) return ret; } +static int kvm_handle_unknown_ec(struct kvm_vcpu *vcpu, struct kvm_run *run) +{ + u32 hsr = kvm_vcpu_get_hsr(vcpu); + + kvm_pr_unimpl("Unknown exception class: hsr: %#08x -- %s\n", + hsr, esr_get_class_string(hsr)); + + kvm_inject_undefined(vcpu); + return 1; +} + static exit_handle_fn arm_exit_handlers[] = { + [0 ... ESR_ELx_EC_MAX] = kvm_handle_unknown_ec, [ESR_ELx_EC_WFx] = kvm_handle_wfx, [ESR_ELx_EC_CP15_32] = kvm_handle_cp15_32, [ESR_ELx_EC_CP15_64] = kvm_handle_cp15_64, @@ -162,13 +174,6 @@ static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu) u32 hsr = kvm_vcpu_get_hsr(vcpu); u8 hsr_ec = ESR_ELx_EC(hsr); - if (hsr_ec >= ARRAY_SIZE(arm_exit_handlers) || - !arm_exit_handlers[hsr_ec]) { - kvm_err("Unknown exception class: hsr: %#08x -- %s\n", - hsr, esr_get_class_string(hsr)); - BUG(); - } - return arm_exit_handlers[hsr_ec]; } diff --git a/arch/arm64/kvm/hyp/tlb.c b/arch/arm64/kvm/hyp/tlb.c index e8e7ba2bc11f..9e1d2b75eecd 100644 --- a/arch/arm64/kvm/hyp/tlb.c +++ b/arch/arm64/kvm/hyp/tlb.c @@ -18,14 +18,62 @@ #include <asm/kvm_hyp.h> #include <asm/tlbflush.h> +static void __hyp_text __tlb_switch_to_guest_vhe(struct kvm *kvm) +{ + u64 val; + + /* + * With VHE enabled, we have HCR_EL2.{E2H,TGE} = {1,1}, and + * most TLB operations target EL2/EL0. In order to affect the + * guest TLBs (EL1/EL0), we need to change one of these two + * bits. Changing E2H is impossible (goodbye TTBR1_EL2), so + * let's flip TGE before executing the TLB operation. + */ + write_sysreg(kvm->arch.vttbr, vttbr_el2); + val = read_sysreg(hcr_el2); + val &= ~HCR_TGE; + write_sysreg(val, hcr_el2); + isb(); +} + +static void __hyp_text __tlb_switch_to_guest_nvhe(struct kvm *kvm) +{ + write_sysreg(kvm->arch.vttbr, vttbr_el2); + isb(); +} + +static hyp_alternate_select(__tlb_switch_to_guest, + __tlb_switch_to_guest_nvhe, + __tlb_switch_to_guest_vhe, + ARM64_HAS_VIRT_HOST_EXTN); + +static void __hyp_text __tlb_switch_to_host_vhe(struct kvm *kvm) +{ + /* + * We're done with the TLB operation, let's restore the host's + * view of HCR_EL2. + */ + write_sysreg(0, vttbr_el2); + write_sysreg(HCR_HOST_VHE_FLAGS, hcr_el2); +} + +static void __hyp_text __tlb_switch_to_host_nvhe(struct kvm *kvm) +{ + write_sysreg(0, vttbr_el2); +} + +static hyp_alternate_select(__tlb_switch_to_host, + __tlb_switch_to_host_nvhe, + __tlb_switch_to_host_vhe, + ARM64_HAS_VIRT_HOST_EXTN); + void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) { dsb(ishst); /* Switch to requested VMID */ kvm = kern_hyp_va(kvm); - write_sysreg(kvm->arch.vttbr, vttbr_el2); - isb(); + __tlb_switch_to_guest()(kvm); /* * We could do so much better if we had the VA as well. @@ -46,7 +94,7 @@ void __hyp_text __kvm_tlb_flush_vmid_ipa(struct kvm *kvm, phys_addr_t ipa) dsb(ish); isb(); - write_sysreg(0, vttbr_el2); + __tlb_switch_to_host()(kvm); } void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm) @@ -55,14 +103,13 @@ void __hyp_text __kvm_tlb_flush_vmid(struct kvm *kvm) /* Switch to requested VMID */ kvm = kern_hyp_va(kvm); - write_sysreg(kvm->arch.vttbr, vttbr_el2); - isb(); + __tlb_switch_to_guest()(kvm); __tlbi(vmalls12e1is); dsb(ish); isb(); - write_sysreg(0, vttbr_el2); + __tlb_switch_to_host()(kvm); } void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) @@ -70,14 +117,13 @@ void __hyp_text __kvm_tlb_flush_local_vmid(struct kvm_vcpu *vcpu) struct kvm *kvm = kern_hyp_va(kern_hyp_va(vcpu)->kvm); /* Switch to requested VMID */ - write_sysreg(kvm->arch.vttbr, vttbr_el2); - isb(); + __tlb_switch_to_guest()(kvm); __tlbi(vmalle1); dsb(nsh); isb(); - write_sysreg(0, vttbr_el2); + __tlb_switch_to_host()(kvm); } void __hyp_text __kvm_flush_vm_context(void) diff --git a/arch/avr32/include/asm/pgtable-2level.h b/arch/avr32/include/asm/pgtable-2level.h index 425dd567b5b9..d5b1c63993ec 100644 --- a/arch/avr32/include/asm/pgtable-2level.h +++ b/arch/avr32/include/asm/pgtable-2level.h @@ -8,6 +8,7 @@ #ifndef __ASM_AVR32_PGTABLE_2LEVEL_H #define __ASM_AVR32_PGTABLE_2LEVEL_H +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> /* diff --git a/arch/avr32/oprofile/backtrace.c b/arch/avr32/oprofile/backtrace.c index 75d9ad6f99cf..29cf2f191bfd 100644 --- a/arch/avr32/oprofile/backtrace.c +++ b/arch/avr32/oprofile/backtrace.c @@ -14,7 +14,7 @@ */ #include <linux/oprofile.h> -#include <linux/sched.h> +#include <linux/ptrace.h> #include <linux/uaccess.h> /* The first two words of each frame on the stack look like this if we have diff --git a/arch/cris/arch-v32/drivers/cryptocop.c b/arch/cris/arch-v32/drivers/cryptocop.c index ae6903d7fdbe..14970f11bbf2 100644 --- a/arch/cris/arch-v32/drivers/cryptocop.c +++ b/arch/cris/arch-v32/drivers/cryptocop.c @@ -2086,7 +2086,7 @@ static void cryptocop_job_queue_close(void) dma_in_cfg.en = regk_dma_no; REG_WR(dma, IN_DMA_INST, rw_cfg, dma_in_cfg); - /* Disble the cryptocop. */ + /* Disable the cryptocop. */ rw_cfg = REG_RD(strcop, regi_strcop, rw_cfg); rw_cfg.en = 0; REG_WR(strcop, regi_strcop, rw_cfg, rw_cfg); diff --git a/arch/cris/include/asm/pgtable.h b/arch/cris/include/asm/pgtable.h index 2a3210ba4c72..fa3a73004cc5 100644 --- a/arch/cris/include/asm/pgtable.h +++ b/arch/cris/include/asm/pgtable.h @@ -6,6 +6,7 @@ #define _CRIS_PGTABLE_H #include <asm/page.h> +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #ifndef __ASSEMBLY__ diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h index a0513d463a1f..ab6e7e961b54 100644 --- a/arch/frv/include/asm/pgtable.h +++ b/arch/frv/include/asm/pgtable.h @@ -16,6 +16,7 @@ #ifndef _ASM_PGTABLE_H #define _ASM_PGTABLE_H +#include <asm-generic/5level-fixup.h> #include <asm/mem-layout.h> #include <asm/setup.h> #include <asm/processor.h> diff --git a/arch/h8300/include/asm/pgtable.h b/arch/h8300/include/asm/pgtable.h index 8341db67821d..7d265d28ba5e 100644 --- a/arch/h8300/include/asm/pgtable.h +++ b/arch/h8300/include/asm/pgtable.h @@ -1,5 +1,6 @@ #ifndef _H8300_PGTABLE_H #define _H8300_PGTABLE_H +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopud.h> #include <asm-generic/pgtable.h> #define pgtable_cache_init() do { } while (0) diff --git a/arch/h8300/kernel/ptrace_h.c b/arch/h8300/kernel/ptrace_h.c index fe3b5673baba..f5ff3b794c85 100644 --- a/arch/h8300/kernel/ptrace_h.c +++ b/arch/h8300/kernel/ptrace_h.c @@ -9,7 +9,7 @@ */ #include <linux/linkage.h> -#include <linux/sched.h> +#include <linux/sched/signal.h> #include <asm/ptrace.h> #define BREAKINST 0x5730 /* trapa #3 */ diff --git a/arch/hexagon/include/asm/pgtable.h b/arch/hexagon/include/asm/pgtable.h index 49eab8136ec3..24a9177fb897 100644 --- a/arch/hexagon/include/asm/pgtable.h +++ b/arch/hexagon/include/asm/pgtable.h @@ -26,6 +26,7 @@ */ #include <linux/swap.h> #include <asm/page.h> +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> /* A handy thing to have if one has the RAM. Declared in head.S */ diff --git a/arch/ia64/include/asm/pgtable.h b/arch/ia64/include/asm/pgtable.h index 384794e665fc..6cc22c8d8923 100644 --- a/arch/ia64/include/asm/pgtable.h +++ b/arch/ia64/include/asm/pgtable.h @@ -587,8 +587,10 @@ extern struct page *zero_page_memmap_ptr; #if CONFIG_PGTABLE_LEVELS == 3 +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopud.h> #endif +#include <asm-generic/5level-fixup.h> #include <asm-generic/pgtable.h> #endif /* _ASM_IA64_PGTABLE_H */ diff --git a/arch/metag/include/asm/pgtable.h b/arch/metag/include/asm/pgtable.h index ffa3a3a2ecad..0c151e5af079 100644 --- a/arch/metag/include/asm/pgtable.h +++ b/arch/metag/include/asm/pgtable.h @@ -6,6 +6,7 @@ #define _METAG_PGTABLE_H #include <asm/pgtable-bits.h> +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> /* Invalid regions on Meta: 0x00000000-0x001FFFFF and 0xFFFF0000-0xFFFFFFFF */ diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index fd850879854d..d506bb0893f9 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -95,7 +95,8 @@ typedef struct { unsigned long pgd; } pgd_t; # else /* CONFIG_MMU */ typedef struct { unsigned long ste[64]; } pmd_t; typedef struct { pmd_t pue[1]; } pud_t; -typedef struct { pud_t pge[1]; } pgd_t; +typedef struct { pud_t p4e[1]; } p4d_t; +typedef struct { p4d_t pge[1]; } pgd_t; # endif /* CONFIG_MMU */ # define pte_val(x) ((x).pte) diff --git a/arch/mips/cavium-octeon/cpu.c b/arch/mips/cavium-octeon/cpu.c index a5b427909b5c..036d56cc4591 100644 --- a/arch/mips/cavium-octeon/cpu.c +++ b/arch/mips/cavium-octeon/cpu.c @@ -10,7 +10,9 @@ #include <linux/irqflags.h> #include <linux/notifier.h> #include <linux/prefetch.h> +#include <linux/ptrace.h> #include <linux/sched.h> +#include <linux/sched/task_stack.h> #include <asm/cop2.h> #include <asm/current.h> diff --git a/arch/mips/cavium-octeon/crypto/octeon-crypto.c b/arch/mips/cavium-octeon/crypto/octeon-crypto.c index 4d22365844af..cfb4a146cf17 100644 --- a/arch/mips/cavium-octeon/crypto/octeon-crypto.c +++ b/arch/mips/cavium-octeon/crypto/octeon-crypto.c @@ -9,6 +9,7 @@ #include <asm/cop2.h> #include <linux/export.h> #include <linux/interrupt.h> +#include <linux/sched/task_stack.h> #include "octeon-crypto.h" diff --git a/arch/mips/cavium-octeon/smp.c b/arch/mips/cavium-octeon/smp.c index 4b94b7fbafa3..3de786545ded 100644 --- a/arch/mips/cavium-octeon/smp.c +++ b/arch/mips/cavium-octeon/smp.c @@ -12,6 +12,7 @@ #include <linux/kernel_stat.h> #include <linux/sched.h> #include <linux/sched/hotplug.h> +#include <linux/sched/task_stack.h> #include <linux/init.h> #include <linux/export.h> diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h index 321752bcbab6..f94455f964ec 100644 --- a/arch/mips/include/asm/fpu.h +++ b/arch/mips/include/asm/fpu.h @@ -12,6 +12,7 @@ #include <linux/sched.h> #include <linux/sched/task_stack.h> +#include <linux/ptrace.h> #include <linux/thread_info.h> #include <linux/bitops.h> diff --git a/arch/mips/include/asm/pgtable-32.h b/arch/mips/include/asm/pgtable-32.h index d21f3da7bdb6..6f94bed571c4 100644 --- a/arch/mips/include/asm/pgtable-32.h +++ b/arch/mips/include/asm/pgtable-32.h @@ -16,6 +16,7 @@ #include <asm/cachectl.h> #include <asm/fixmap.h> +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> extern int temp_tlb_entry; diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h index 514cbc0a6a67..130a2a6c1531 100644 --- a/arch/mips/include/asm/pgtable-64.h +++ b/arch/mips/include/asm/pgtable-64.h @@ -17,6 +17,7 @@ #include <asm/cachectl.h> #include <asm/fixmap.h> +#define __ARCH_USE_5LEVEL_HACK #if defined(CONFIG_PAGE_SIZE_64KB) && !defined(CONFIG_MIPS_VA_BITS_48) #include <asm-generic/pgtable-nopmd.h> #else diff --git a/arch/mips/kernel/smp-bmips.c b/arch/mips/kernel/smp-bmips.c index 3daa2cae50b0..1b070a76fcdd 100644 --- a/arch/mips/kernel/smp-bmips.c +++ b/arch/mips/kernel/smp-bmips.c @@ -11,6 +11,7 @@ #include <linux/init.h> #include <linux/sched.h> #include <linux/sched/hotplug.h> +#include <linux/sched/task_stack.h> #include <linux/mm.h> #include <linux/delay.h> #include <linux/smp.h> diff --git a/arch/mips/kernel/smp-mt.c b/arch/mips/kernel/smp-mt.c index e077ea3e11fb..e398cbc3d776 100644 --- a/arch/mips/kernel/smp-mt.c +++ b/arch/mips/kernel/smp-mt.c @@ -23,6 +23,7 @@ #include <linux/interrupt.h> #include <linux/irqchip/mips-gic.h> #include <linux/compiler.h> +#include <linux/sched/task_stack.h> #include <linux/smp.h> #include <linux/atomic.h> diff --git a/arch/mips/loongson64/loongson-3/cop2-ex.c b/arch/mips/loongson64/loongson-3/cop2-ex.c index ea13764d0a03..621d6af5f6eb 100644 --- a/arch/mips/loongson64/loongson-3/cop2-ex.c +++ b/arch/mips/loongson64/loongson-3/cop2-ex.c @@ -13,6 +13,7 @@ #include <linux/init.h> #include <linux/sched.h> #include <linux/notifier.h> +#include <linux/ptrace.h> #include <asm/fpu.h> #include <asm/cop2.h> diff --git a/arch/mips/netlogic/common/smp.c b/arch/mips/netlogic/common/smp.c index 10d86d54880a..bddf1ef553a4 100644 --- a/arch/mips/netlogic/common/smp.c +++ b/arch/mips/netlogic/common/smp.c @@ -35,6 +35,7 @@ #include <linux/kernel.h> #include <linux/delay.h> #include <linux/init.h> +#include <linux/sched/task_stack.h> #include <linux/smp.h> #include <linux/irq.h> diff --git a/arch/mips/netlogic/xlp/cop2-ex.c b/arch/mips/netlogic/xlp/cop2-ex.c index 52bc5de42005..21e439b3db70 100644 --- a/arch/mips/netlogic/xlp/cop2-ex.c +++ b/arch/mips/netlogic/xlp/cop2-ex.c @@ -9,11 +9,14 @@ * Copyright (C) 2009 Wind River Systems, * written by Ralf Baechle <ralf@linux-mips.org> */ +#include <linux/capability.h> #include <linux/init.h> #include <linux/irqflags.h> #include <linux/notifier.h> #include <linux/prefetch.h> +#include <linux/ptrace.h> #include <linux/sched.h> +#include <linux/sched/task_stack.h> #include <asm/cop2.h> #include <asm/current.h> diff --git a/arch/mips/sgi-ip22/ip28-berr.c b/arch/mips/sgi-ip22/ip28-berr.c index 1f2a5bc4779e..75460e1e106b 100644 --- a/arch/mips/sgi-ip22/ip28-berr.c +++ b/arch/mips/sgi-ip22/ip28-berr.c @@ -9,6 +9,7 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/sched/debug.h> +#include <linux/sched/signal.h> #include <linux/seq_file.h> #include <asm/addrspace.h> diff --git a/arch/mips/sgi-ip27/ip27-berr.c b/arch/mips/sgi-ip27/ip27-berr.c index d12879eb2b1f..83efe03d5c60 100644 --- a/arch/mips/sgi-ip27/ip27-berr.c +++ b/arch/mips/sgi-ip27/ip27-berr.c @@ -12,7 +12,9 @@ #include <linux/signal.h> /* for SIGBUS */ #include <linux/sched.h> /* schow_regs(), force_sig() */ #include <linux/sched/debug.h> +#include <linux/sched/signal.h> +#include <asm/ptrace.h> #include <asm/sn/addrs.h> #include <asm/sn/arch.h> #include <asm/sn/sn0/hub.h> diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index f5ed45e8f442..4cd47d23d81a 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -8,10 +8,13 @@ */ #include <linux/init.h> #include <linux/sched.h> +#include <linux/sched/task_stack.h> #include <linux/topology.h> #include <linux/nodemask.h> + #include <asm/page.h> #include <asm/processor.h> +#include <asm/ptrace.h> #include <asm/sn/arch.h> #include <asm/sn/gda.h> #include <asm/sn/intr.h> diff --git a/arch/mips/sgi-ip32/ip32-berr.c b/arch/mips/sgi-ip32/ip32-berr.c index 57d8c7486fe6..c1f12a9cf305 100644 --- a/arch/mips/sgi-ip32/ip32-berr.c +++ b/arch/mips/sgi-ip32/ip32-berr.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/sched.h> #include <linux/sched/debug.h> +#include <linux/sched/signal.h> #include <asm/traps.h> #include <linux/uaccess.h> #include <asm/addrspace.h> diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c index 8bd415c8729f..b3b442def423 100644 --- a/arch/mips/sgi-ip32/ip32-reset.c +++ b/arch/mips/sgi-ip32/ip32-reset.c @@ -13,6 +13,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/sched.h> +#include <linux/sched/signal.h> #include <linux/notifier.h> #include <linux/delay.h> #include <linux/rtc/ds1685.h> diff --git a/arch/mn10300/include/asm/page.h b/arch/mn10300/include/asm/page.h index 3810a6f740fd..dfe730a5ede0 100644 --- a/arch/mn10300/include/asm/page.h +++ b/arch/mn10300/include/asm/page.h @@ -57,6 +57,7 @@ typedef struct page *pgtable_t; #define __pgd(x) ((pgd_t) { (x) }) #define __pgprot(x) ((pgprot_t) { (x) }) +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #endif /* !__ASSEMBLY__ */ diff --git a/arch/nios2/include/asm/pgtable.h b/arch/nios2/include/asm/pgtable.h index 298393c3cb42..db4f7d179220 100644 --- a/arch/nios2/include/asm/pgtable.h +++ b/arch/nios2/include/asm/pgtable.h @@ -22,6 +22,7 @@ #include <asm/tlbflush.h> #include <asm/pgtable-bits.h> +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #define FIRST_USER_ADDRESS 0UL diff --git a/arch/openrisc/include/asm/pgtable.h b/arch/openrisc/include/asm/pgtable.h index 3567aa7be555..ff97374ca069 100644 --- a/arch/openrisc/include/asm/pgtable.h +++ b/arch/openrisc/include/asm/pgtable.h @@ -25,6 +25,7 @@ #ifndef __ASM_OPENRISC_PGTABLE_H #define __ASM_OPENRISC_PGTABLE_H +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #ifndef __ASSEMBLY__ diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 494091762bd7..97a8bc8a095c 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -80,93 +80,99 @@ config ARCH_HAS_DMA_SET_COHERENT_MASK config PPC bool default y - select BUILDTIME_EXTABLE_SORT + # + # Please keep this list sorted alphabetically. + # + select ARCH_HAS_DEVMEM_IS_ALLOWED + select ARCH_HAS_DMA_SET_COHERENT_MASK + select ARCH_HAS_ELF_RANDOMIZE + select ARCH_HAS_GCOV_PROFILE_ALL + select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE + select ARCH_HAS_SG_CHAIN + select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST + select ARCH_HAS_UBSAN_SANITIZE_ALL + select ARCH_HAVE_NMI_SAFE_CMPXCHG select ARCH_MIGHT_HAVE_PC_PARPORT select ARCH_MIGHT_HAVE_PC_SERIO + select ARCH_SUPPORTS_ATOMIC_RMW + select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT + select ARCH_USE_BUILTIN_BSWAP + select ARCH_USE_CMPXCHG_LOCKREF if PPC64 + select ARCH_WANT_IPC_PARSE_VERSION select BINFMT_ELF - select ARCH_HAS_ELF_RANDOMIZE - select OF - select OF_EARLY_FLATTREE - select OF_RESERVED_MEM - select HAVE_FTRACE_MCOUNT_RECORD + select BUILDTIME_EXTABLE_SORT + select CLONE_BACKWARDS + select DCACHE_WORD_ACCESS if PPC64 && CPU_LITTLE_ENDIAN + select EDAC_ATOMIC_SCRUB + select EDAC_SUPPORT + select GENERIC_ATOMIC64 if PPC32 + select GENERIC_CLOCKEVENTS + select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select GENERIC_CMOS_UPDATE + select GENERIC_CPU_AUTOPROBE + select GENERIC_IRQ_SHOW + select GENERIC_IRQ_SHOW_LEVEL + select GENERIC_SMP_IDLE_THREAD + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER + select GENERIC_TIME_VSYSCALL_OLD + select HAVE_ARCH_AUDITSYSCALL + select HAVE_ARCH_HARDENED_USERCOPY + select HAVE_ARCH_JUMP_LABEL + select HAVE_ARCH_KGDB + select HAVE_ARCH_SECCOMP_FILTER + select HAVE_ARCH_TRACEHOOK + select HAVE_CBPF_JIT if !PPC64 + select HAVE_CONTEXT_TRACKING if PPC64 + select HAVE_DEBUG_KMEMLEAK + select HAVE_DEBUG_STACKOVERFLOW + select HAVE_DMA_API_DEBUG select HAVE_DYNAMIC_FTRACE - select HAVE_DYNAMIC_FTRACE_WITH_REGS if MPROFILE_KERNEL - select HAVE_FUNCTION_TRACER + select HAVE_DYNAMIC_FTRACE_WITH_REGS if MPROFILE_KERNEL + select HAVE_EBPF_JIT if PPC64 + select HAVE_EFFICIENT_UNALIGNED_ACCESS if !(CPU_LITTLE_ENDIAN && POWER7_CPU) + select HAVE_FTRACE_MCOUNT_RECORD select HAVE_FUNCTION_GRAPH_TRACER + select HAVE_FUNCTION_TRACER select HAVE_GCC_PLUGINS - select SYSCTL_EXCEPTION_TRACE - select VIRT_TO_BUS if !PPC64 + select HAVE_GENERIC_RCU_GUP + select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx) select HAVE_IDE select HAVE_IOREMAP_PROT - select HAVE_EFFICIENT_UNALIGNED_ACCESS if !(CPU_LITTLE_ENDIAN && POWER7_CPU) + select HAVE_IRQ_EXIT_ON_IRQ_STACK + select HAVE_KERNEL_GZIP select HAVE_KPROBES - select HAVE_OPTPROBES if PPC64 - select HAVE_ARCH_KGDB select HAVE_KRETPROBES - select HAVE_ARCH_TRACEHOOK + select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS select HAVE_MEMBLOCK select HAVE_MEMBLOCK_NODE_MAP - select HAVE_DMA_API_DEBUG + select HAVE_MOD_ARCH_SPECIFIC + select HAVE_NMI if PERF_EVENTS select HAVE_OPROFILE - select HAVE_DEBUG_KMEMLEAK - select ARCH_HAS_SG_CHAIN - select GENERIC_ATOMIC64 if PPC32 + select HAVE_OPTPROBES if PPC64 select HAVE_PERF_EVENTS + select HAVE_PERF_EVENTS_NMI if PPC64 select HAVE_PERF_REGS select HAVE_PERF_USER_STACK_DUMP + select HAVE_RCU_TABLE_FREE if SMP select HAVE_REGS_AND_STACK_ACCESS_API - select HAVE_HW_BREAKPOINT if PERF_EVENTS && (PPC_BOOK3S || PPC_8xx) - select ARCH_WANT_IPC_PARSE_VERSION - select SPARSE_IRQ + select HAVE_SYSCALL_TRACEPOINTS + select HAVE_VIRT_CPU_ACCOUNTING select IRQ_DOMAIN - select GENERIC_IRQ_SHOW - select GENERIC_IRQ_SHOW_LEVEL select IRQ_FORCED_THREADING - select HAVE_RCU_TABLE_FREE if SMP - select HAVE_SYSCALL_TRACEPOINTS - select HAVE_CBPF_JIT if !PPC64 - select HAVE_EBPF_JIT if PPC64 - select HAVE_ARCH_JUMP_LABEL - select ARCH_HAVE_NMI_SAFE_CMPXCHG - select ARCH_HAS_GCOV_PROFILE_ALL - select GENERIC_SMP_IDLE_THREAD - select GENERIC_CMOS_UPDATE - select GENERIC_TIME_VSYSCALL_OLD - select GENERIC_CLOCKEVENTS - select GENERIC_CLOCKEVENTS_BROADCAST if SMP - select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST - select GENERIC_STRNCPY_FROM_USER - select GENERIC_STRNLEN_USER - select HAVE_MOD_ARCH_SPECIFIC select MODULES_USE_ELF_RELA - select CLONE_BACKWARDS - select ARCH_USE_BUILTIN_BSWAP - select OLD_SIGSUSPEND - select OLD_SIGACTION if PPC32 - select HAVE_DEBUG_STACKOVERFLOW - select HAVE_IRQ_EXIT_ON_IRQ_STACK - select ARCH_USE_CMPXCHG_LOCKREF if PPC64 - select HAVE_ARCH_AUDITSYSCALL - select ARCH_SUPPORTS_ATOMIC_RMW - select DCACHE_WORD_ACCESS if PPC64 && CPU_LITTLE_ENDIAN select NO_BOOTMEM - select HAVE_GENERIC_RCU_GUP - select HAVE_PERF_EVENTS_NMI if PPC64 - select HAVE_NMI if PERF_EVENTS - select EDAC_SUPPORT - select EDAC_ATOMIC_SCRUB - select ARCH_HAS_DMA_SET_COHERENT_MASK - select ARCH_HAS_DEVMEM_IS_ALLOWED - select HAVE_ARCH_SECCOMP_FILTER - select ARCH_HAS_UBSAN_SANITIZE_ALL - select ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT - select HAVE_LIVEPATCH if HAVE_DYNAMIC_FTRACE_WITH_REGS - select GENERIC_CPU_AUTOPROBE - select HAVE_VIRT_CPU_ACCOUNTING - select ARCH_HAS_SCALED_CPUTIME if VIRT_CPU_ACCOUNTING_NATIVE - select HAVE_ARCH_HARDENED_USERCOPY - select HAVE_KERNEL_GZIP - select HAVE_CONTEXT_TRACKING if PPC64 + select OF + select OF_EARLY_FLATTREE + select OF_RESERVED_MEM + select OLD_SIGACTION if PPC32 + select OLD_SIGSUSPEND + select SPARSE_IRQ + select SYSCTL_EXCEPTION_TRACE + select VIRT_TO_BUS if !PPC64 + # + # Please keep this list sorted alphabetically. + # config GENERIC_CSUM def_bool n diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 31286fa7873c..19b0d1a81959 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -72,8 +72,15 @@ GNUTARGET := powerpc MULTIPLEWORD := -mmultiple endif -cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mbig-endian) +ifdef CONFIG_PPC64 +cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mabi=elfv1) +cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mcall-aixdesc) +aflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mabi=elfv1) +aflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -mabi=elfv2 +endif + cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -mlittle-endian +cflags-$(CONFIG_CPU_BIG_ENDIAN) += $(call cc-option,-mbig-endian) ifneq ($(cc-name),clang) cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -mno-strict-align endif @@ -113,7 +120,9 @@ ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y) CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2,$(call cc-option,-mcall-aixdesc)) AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv2) else +CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv1) CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcall-aixdesc) +AFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mabi=elfv1) endif CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mcmodel=medium,$(call cc-option,-mminimal-toc)) CFLAGS-$(CONFIG_PPC64) += $(call cc-option,-mno-pointers-to-nested-functions) diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h index 012223638815..26ed228d4dc6 100644 --- a/arch/powerpc/include/asm/book3s/32/pgtable.h +++ b/arch/powerpc/include/asm/book3s/32/pgtable.h @@ -1,6 +1,7 @@ #ifndef _ASM_POWERPC_BOOK3S_32_PGTABLE_H #define _ASM_POWERPC_BOOK3S_32_PGTABLE_H +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #include <asm/book3s/32/hash.h> diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h index 1eeeb72c7015..8f4d41936e5a 100644 --- a/arch/powerpc/include/asm/book3s/64/pgtable.h +++ b/arch/powerpc/include/asm/book3s/64/pgtable.h @@ -1,9 +1,12 @@ #ifndef _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ #define _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ +#include <asm-generic/5level-fixup.h> + #ifndef __ASSEMBLY__ #include <linux/mmdebug.h> #endif + /* * Common bits between hash and Radix page table */ @@ -347,23 +350,58 @@ static inline int __ptep_test_and_clear_young(struct mm_struct *mm, __r; \ }) +static inline int __pte_write(pte_t pte) +{ + return !!(pte_raw(pte) & cpu_to_be64(_PAGE_WRITE)); +} + +#ifdef CONFIG_NUMA_BALANCING +#define pte_savedwrite pte_savedwrite +static inline bool pte_savedwrite(pte_t pte) +{ + /* + * Saved write ptes are prot none ptes that doesn't have + * privileged bit sit. We mark prot none as one which has + * present and pviliged bit set and RWX cleared. To mark + * protnone which used to have _PAGE_WRITE set we clear + * the privileged bit. + */ + return !(pte_raw(pte) & cpu_to_be64(_PAGE_RWX | _PAGE_PRIVILEGED)); +} +#else +#define pte_savedwrite pte_savedwrite +static inline bool pte_savedwrite(pte_t pte) +{ + return false; +} +#endif + +static inline int pte_write(pte_t pte) +{ + return __pte_write(pte) || pte_savedwrite(pte); +} + #define __HAVE_ARCH_PTEP_SET_WRPROTECT static inline void ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - if ((pte_raw(*ptep) & cpu_to_be64(_PAGE_WRITE)) == 0) - return; - - pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 0); + if (__pte_write(*ptep)) + pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 0); + else if (unlikely(pte_savedwrite(*ptep))) + pte_update(mm, addr, ptep, 0, _PAGE_PRIVILEGED, 0); } static inline void huge_ptep_set_wrprotect(struct mm_struct *mm, unsigned long addr, pte_t *ptep) { - if ((pte_raw(*ptep) & cpu_to_be64(_PAGE_WRITE)) == 0) - return; - - pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 1); + /* + * We should not find protnone for hugetlb, but this complete the + * interface. + */ + if (__pte_write(*ptep)) + pte_update(mm, addr, ptep, _PAGE_WRITE, 0, 1); + else if (unlikely(pte_savedwrite(*ptep))) + pte_update(mm, addr, ptep, 0, _PAGE_PRIVILEGED, 1); } #define __HAVE_ARCH_PTEP_GET_AND_CLEAR @@ -397,11 +435,6 @@ static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_update(mm, addr, ptep, ~0UL, 0, 0); } -static inline int pte_write(pte_t pte) -{ - return !!(pte_raw(pte) & cpu_to_be64(_PAGE_WRITE)); -} - static inline int pte_dirty(pte_t pte) { return !!(pte_raw(pte) & cpu_to_be64(_PAGE_DIRTY)); @@ -465,19 +498,12 @@ static inline pte_t pte_clear_savedwrite(pte_t pte) VM_BUG_ON(!pte_protnone(pte)); return __pte(pte_val(pte) | _PAGE_PRIVILEGED); } - -#define pte_savedwrite pte_savedwrite -static inline bool pte_savedwrite(pte_t pte) +#else +#define pte_clear_savedwrite pte_clear_savedwrite +static inline pte_t pte_clear_savedwrite(pte_t pte) { - /* - * Saved write ptes are prot none ptes that doesn't have - * privileged bit sit. We mark prot none as one which has - * present and pviliged bit set and RWX cleared. To mark - * protnone which used to have _PAGE_WRITE set we clear - * the privileged bit. - */ - VM_BUG_ON(!pte_protnone(pte)); - return !(pte_raw(pte) & cpu_to_be64(_PAGE_RWX | _PAGE_PRIVILEGED)); + VM_WARN_ON(1); + return __pte(pte_val(pte) & ~_PAGE_WRITE); } #endif /* CONFIG_NUMA_BALANCING */ @@ -506,6 +532,8 @@ static inline unsigned long pte_pfn(pte_t pte) /* Generic modifiers for PTE bits */ static inline pte_t pte_wrprotect(pte_t pte) { + if (unlikely(pte_savedwrite(pte))) + return pte_clear_savedwrite(pte); return __pte(pte_val(pte) & ~_PAGE_WRITE); } @@ -926,6 +954,7 @@ static inline int pmd_protnone(pmd_t pmd) #define __HAVE_ARCH_PMD_WRITE #define pmd_write(pmd) pte_write(pmd_pte(pmd)) +#define __pmd_write(pmd) __pte_write(pmd_pte(pmd)) #define pmd_savedwrite(pmd) pte_savedwrite(pmd_pte(pmd)) #ifdef CONFIG_TRANSPARENT_HUGEPAGE @@ -982,11 +1011,10 @@ static inline int __pmdp_test_and_clear_young(struct mm_struct *mm, static inline void pmdp_set_wrprotect(struct mm_struct *mm, unsigned long addr, pmd_t *pmdp) { - - if ((pmd_raw(*pmdp) & cpu_to_be64(_PAGE_WRITE)) == 0) - return; - - pmd_hugepage_update(mm, addr, pmdp, _PAGE_WRITE, 0); + if (__pmd_write((*pmdp))) + pmd_hugepage_update(mm, addr, pmdp, _PAGE_WRITE, 0); + else if (unlikely(pmd_savedwrite(*pmdp))) + pmd_hugepage_update(mm, addr, pmdp, 0, _PAGE_PRIVILEGED); } static inline int pmd_trans_huge(pmd_t pmd) diff --git a/arch/powerpc/include/asm/checksum.h b/arch/powerpc/include/asm/checksum.h index 4e63787dc3be..842124b199b5 100644 --- a/arch/powerpc/include/asm/checksum.h +++ b/arch/powerpc/include/asm/checksum.h @@ -112,7 +112,7 @@ static inline __wsum csum_add(__wsum csum, __wsum addend) #ifdef __powerpc64__ res += (__force u64)addend; - return (__force __wsum)((u32)res + (res >> 32)); + return (__force __wsum) from64to32(res); #else asm("addc %0,%0,%1;" "addze %0,%0;" diff --git a/arch/powerpc/include/asm/cpuidle.h b/arch/powerpc/include/asm/cpuidle.h index fd321eb423cb..155731557c9b 100644 --- a/arch/powerpc/include/asm/cpuidle.h +++ b/arch/powerpc/include/asm/cpuidle.h @@ -70,8 +70,8 @@ static inline void report_invalid_psscr_val(u64 psscr_val, int err) std r0,0(r1); \ ptesync; \ ld r0,0(r1); \ -1: cmpd cr0,r0,r0; \ - bne 1b; \ +236: cmpd cr0,r0,r0; \ + bne 236b; \ IDLE_INST; \ #define IDLE_STATE_ENTER_SEQ_NORET(IDLE_INST) \ diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h index 93b9b84568e8..09bde6e34f5d 100644 --- a/arch/powerpc/include/asm/elf.h +++ b/arch/powerpc/include/asm/elf.h @@ -144,8 +144,8 @@ extern int arch_setup_additional_pages(struct linux_binprm *bprm, #define ARCH_DLINFO_CACHE_GEOMETRY \ NEW_AUX_ENT(AT_L1I_CACHESIZE, ppc64_caches.l1i.size); \ NEW_AUX_ENT(AT_L1I_CACHEGEOMETRY, get_cache_geometry(l1i)); \ - NEW_AUX_ENT(AT_L1D_CACHESIZE, ppc64_caches.l1i.size); \ - NEW_AUX_ENT(AT_L1D_CACHEGEOMETRY, get_cache_geometry(l1i)); \ + NEW_AUX_ENT(AT_L1D_CACHESIZE, ppc64_caches.l1d.size); \ + NEW_AUX_ENT(AT_L1D_CACHEGEOMETRY, get_cache_geometry(l1d)); \ NEW_AUX_ENT(AT_L2_CACHESIZE, ppc64_caches.l2.size); \ NEW_AUX_ENT(AT_L2_CACHEGEOMETRY, get_cache_geometry(l2)); \ NEW_AUX_ENT(AT_L3_CACHESIZE, ppc64_caches.l3.size); \ diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h index ba9921bf202e..5134ade2e850 100644 --- a/arch/powerpc/include/asm/nohash/32/pgtable.h +++ b/arch/powerpc/include/asm/nohash/32/pgtable.h @@ -1,6 +1,7 @@ #ifndef _ASM_POWERPC_NOHASH_32_PGTABLE_H #define _ASM_POWERPC_NOHASH_32_PGTABLE_H +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #ifndef __ASSEMBLY__ diff --git a/arch/powerpc/include/asm/nohash/64/pgtable-4k.h b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h index d0db98793dd8..9f4de0a1035e 100644 --- a/arch/powerpc/include/asm/nohash/64/pgtable-4k.h +++ b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h @@ -1,5 +1,8 @@ #ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H #define _ASM_POWERPC_NOHASH_64_PGTABLE_4K_H + +#include <asm-generic/5level-fixup.h> + /* * Entries per page directory level. The PTE level must use a 64b record * for each page table entry. The PMD and PGD level use a 32b record for diff --git a/arch/powerpc/include/asm/nohash/64/pgtable-64k.h b/arch/powerpc/include/asm/nohash/64/pgtable-64k.h index 55b28ef3409a..1facb584dd29 100644 --- a/arch/powerpc/include/asm/nohash/64/pgtable-64k.h +++ b/arch/powerpc/include/asm/nohash/64/pgtable-64k.h @@ -1,6 +1,7 @@ #ifndef _ASM_POWERPC_NOHASH_64_PGTABLE_64K_H #define _ASM_POWERPC_NOHASH_64_PGTABLE_64K_H +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopud.h> diff --git a/arch/powerpc/include/asm/nohash/pgtable.h b/arch/powerpc/include/asm/nohash/pgtable.h index 0cd8a3852763..e5805ad78e12 100644 --- a/arch/powerpc/include/asm/nohash/pgtable.h +++ b/arch/powerpc/include/asm/nohash/pgtable.h @@ -230,7 +230,7 @@ static inline int hugepd_ok(hugepd_t hpd) return ((hpd_val(hpd) & 0x4) != 0); #else /* We clear the top bit to indicate hugepd */ - return ((hpd_val(hpd) & PD_HUGE) == 0); + return (hpd_val(hpd) && (hpd_val(hpd) & PD_HUGE) == 0); #endif } diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h index d99bd442aacb..e7d6d86563ee 100644 --- a/arch/powerpc/include/asm/ppc-opcode.h +++ b/arch/powerpc/include/asm/ppc-opcode.h @@ -284,6 +284,13 @@ #define PPC_INST_BRANCH_COND 0x40800000 #define PPC_INST_LBZCIX 0x7c0006aa #define PPC_INST_STBCIX 0x7c0007aa +#define PPC_INST_LWZX 0x7c00002e +#define PPC_INST_LFSX 0x7c00042e +#define PPC_INST_STFSX 0x7c00052e +#define PPC_INST_LFDX 0x7c0004ae +#define PPC_INST_STFDX 0x7c0005ae +#define PPC_INST_LVX 0x7c0000ce +#define PPC_INST_STVX 0x7c0001ce /* macros to insert fields into opcodes */ #define ___PPC_RA(a) (((a) & 0x1f) << 16) diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h index 4a90634e8322..35c00d7a0cf8 100644 --- a/arch/powerpc/include/asm/prom.h +++ b/arch/powerpc/include/asm/prom.h @@ -160,12 +160,18 @@ struct of_drconf_cell { #define OV5_PFO_HW_ENCR 0x1120 /* PFO Encryption Accelerator */ #define OV5_SUB_PROCESSORS 0x1501 /* 1,2,or 4 Sub-Processors supported */ #define OV5_XIVE_EXPLOIT 0x1701 /* XIVE exploitation supported */ -#define OV5_MMU_RADIX_300 0x1880 /* ISA v3.00 radix MMU supported */ -#define OV5_MMU_HASH_300 0x1840 /* ISA v3.00 hash MMU supported */ -#define OV5_MMU_SEGM_RADIX 0x1820 /* radix mode (no segmentation) */ -#define OV5_MMU_PROC_TBL 0x1810 /* hcall selects SLB or proc table */ -#define OV5_MMU_SLB 0x1800 /* always use SLB */ -#define OV5_MMU_GTSE 0x1808 /* Guest translation shootdown */ +/* MMU Base Architecture */ +#define OV5_MMU_SUPPORT 0x18C0 /* MMU Mode Support Mask */ +#define OV5_MMU_HASH 0x1800 /* Hash MMU Only */ +#define OV5_MMU_RADIX 0x1840 /* Radix MMU Only */ +#define OV5_MMU_EITHER 0x1880 /* Hash or Radix Supported */ +#define OV5_MMU_DYNAMIC 0x18C0 /* Hash or Radix Can Switch Later */ +#define OV5_NMMU 0x1820 /* Nest MMU Available */ +/* Hash Table Extensions */ +#define OV5_HASH_SEG_TBL 0x1980 /* In Memory Segment Tables Available */ +#define OV5_HASH_GTSE 0x1940 /* Guest Translation Shoot Down Avail */ +/* Radix Table Extensions */ +#define OV5_RADIX_GTSE 0x1A40 /* Guest Translation Shoot Down Avail */ /* Option Vector 6: IBM PAPR hints */ #define OV6_LINUX 0x02 /* Linux is our OS */ diff --git a/arch/powerpc/kernel/idle_book3s.S b/arch/powerpc/kernel/idle_book3s.S index 5f61cc0349c0..995728736677 100644 --- a/arch/powerpc/kernel/idle_book3s.S +++ b/arch/powerpc/kernel/idle_book3s.S @@ -276,19 +276,21 @@ power_enter_stop: */ andis. r4,r3,PSSCR_EC_ESL_MASK_SHIFTED clrldi r3,r3,60 /* r3 = Bits[60:63] = Requested Level (RL) */ - bne 1f + bne .Lhandle_esl_ec_set IDLE_STATE_ENTER_SEQ(PPC_STOP) li r3,0 /* Since we didn't lose state, return 0 */ b pnv_wakeup_noloss + +.Lhandle_esl_ec_set: /* * Check if the requested state is a deep idle state. */ -1: LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state) + LOAD_REG_ADDRBASE(r5,pnv_first_deep_stop_state) ld r4,ADDROFF(pnv_first_deep_stop_state)(r5) cmpd r3,r4 - bge 2f + bge .Lhandle_deep_stop IDLE_STATE_ENTER_SEQ_NORET(PPC_STOP) -2: +.Lhandle_deep_stop: /* * Entering deep idle state. * Clear thread bit in PACA_CORE_IDLE_STATE, save SPRs to diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index a3944540fe0d..1c1b44ec7642 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -168,6 +168,14 @@ static unsigned long __initdata prom_tce_alloc_start; static unsigned long __initdata prom_tce_alloc_end; #endif +static bool __initdata prom_radix_disable; + +struct platform_support { + bool hash_mmu; + bool radix_mmu; + bool radix_gtse; +}; + /* Platforms codes are now obsolete in the kernel. Now only used within this * file and ultimately gone too. Feel free to change them if you need, they * are not shared with anything outside of this file anymore @@ -626,6 +634,12 @@ static void __init early_cmdline_parse(void) prom_memory_limit = ALIGN(prom_memory_limit, 0x1000000); #endif } + + opt = strstr(prom_cmd_line, "disable_radix"); + if (opt) { + prom_debug("Radix disabled from cmdline\n"); + prom_radix_disable = true; + } } #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) @@ -695,6 +709,8 @@ struct option_vector5 { u8 byte22; u8 intarch; u8 mmu; + u8 hash_ext; + u8 radix_ext; } __packed; struct option_vector6 { @@ -850,8 +866,9 @@ struct ibm_arch_vec __cacheline_aligned ibm_architecture_vec = { .reserved3 = 0, .subprocessors = 1, .intarch = 0, - .mmu = OV5_FEAT(OV5_MMU_RADIX_300) | OV5_FEAT(OV5_MMU_HASH_300) | - OV5_FEAT(OV5_MMU_PROC_TBL) | OV5_FEAT(OV5_MMU_GTSE), + .mmu = 0, + .hash_ext = 0, + .radix_ext = 0, }, /* option vector 6: IBM PAPR hints */ @@ -990,6 +1007,92 @@ static int __init prom_count_smt_threads(void) } +static void __init prom_parse_mmu_model(u8 val, + struct platform_support *support) +{ + switch (val) { + case OV5_FEAT(OV5_MMU_DYNAMIC): + case OV5_FEAT(OV5_MMU_EITHER): /* Either Available */ + prom_debug("MMU - either supported\n"); + support->radix_mmu = !prom_radix_disable; + support->hash_mmu = true; + break; + case OV5_FEAT(OV5_MMU_RADIX): /* Only Radix */ + prom_debug("MMU - radix only\n"); + if (prom_radix_disable) { + /* + * If we __have__ to do radix, we're better off ignoring + * the command line rather than not booting. + */ + prom_printf("WARNING: Ignoring cmdline option disable_radix\n"); + } + support->radix_mmu = true; + break; + case OV5_FEAT(OV5_MMU_HASH): + prom_debug("MMU - hash only\n"); + support->hash_mmu = true; + break; + default: + prom_debug("Unknown mmu support option: 0x%x\n", val); + break; + } +} + +static void __init prom_parse_platform_support(u8 index, u8 val, + struct platform_support *support) +{ + switch (index) { + case OV5_INDX(OV5_MMU_SUPPORT): /* MMU Model */ + prom_parse_mmu_model(val & OV5_FEAT(OV5_MMU_SUPPORT), support); + break; + case OV5_INDX(OV5_RADIX_GTSE): /* Radix Extensions */ + if (val & OV5_FEAT(OV5_RADIX_GTSE)) { + prom_debug("Radix - GTSE supported\n"); + support->radix_gtse = true; + } + break; + } +} + +static void __init prom_check_platform_support(void) +{ + struct platform_support supported = { + .hash_mmu = false, + .radix_mmu = false, + .radix_gtse = false + }; + int prop_len = prom_getproplen(prom.chosen, + "ibm,arch-vec-5-platform-support"); + if (prop_len > 1) { + int i; + u8 vec[prop_len]; + prom_debug("Found ibm,arch-vec-5-platform-support, len: %d\n", + prop_len); + prom_getprop(prom.chosen, "ibm,arch-vec-5-platform-support", + &vec, sizeof(vec)); + for (i = 0; i < prop_len; i += 2) { + prom_debug("%d: index = 0x%x val = 0x%x\n", i / 2 + , vec[i] + , vec[i + 1]); + prom_parse_platform_support(vec[i], vec[i + 1], + &supported); + } + } + + if (supported.radix_mmu && supported.radix_gtse) { + /* Radix preferred - but we require GTSE for now */ + prom_debug("Asking for radix with GTSE\n"); + ibm_architecture_vec.vec5.mmu = OV5_FEAT(OV5_MMU_RADIX); + ibm_architecture_vec.vec5.radix_ext = OV5_FEAT(OV5_RADIX_GTSE); + } else if (supported.hash_mmu) { + /* Default to hash mmu (if we can) */ + prom_debug("Asking for hash\n"); + ibm_architecture_vec.vec5.mmu = OV5_FEAT(OV5_MMU_HASH); + } else { + /* We're probably on a legacy hypervisor */ + prom_debug("Assuming legacy hash support\n"); + } +} static void __init prom_send_capabilities(void) { @@ -997,6 +1100,9 @@ static void __init prom_send_capabilities(void) prom_arg_t ret; u32 cores; + /* Check ibm,arch-vec-5-platform-support and fixup vec5 if required */ + prom_check_platform_support(); + root = call_prom("open", 1, 1, ADDR("/")); if (root != 0) { /* We need to tell the FW about the number of cores we support. @@ -2993,6 +3099,11 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, */ prom_check_initrd(r3, r4); + /* + * Do early parsing of command line + */ + early_cmdline_parse(); + #if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) /* * On pSeries, inform the firmware about our capabilities @@ -3009,11 +3120,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, copy_and_flush(0, kbase, 0x100, 0); /* - * Do early parsing of command line - */ - early_cmdline_parse(); - - /* * Initialize memory management within prom_init */ prom_init_mem(); diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c index adf2084f214b..9cfaa8b69b5f 100644 --- a/arch/powerpc/kernel/setup_64.c +++ b/arch/powerpc/kernel/setup_64.c @@ -408,7 +408,10 @@ static void init_cache_info(struct ppc_cache_info *info, u32 size, u32 lsize, info->line_size = lsize; info->block_size = bsize; info->log_block_size = __ilog2(bsize); - info->blocks_per_page = PAGE_SIZE / bsize; + if (bsize) + info->blocks_per_page = PAGE_SIZE / bsize; + else + info->blocks_per_page = 0; if (sets == 0) info->assoc = 0xffff; diff --git a/arch/powerpc/kvm/book3s_64_mmu_hv.c b/arch/powerpc/kvm/book3s_64_mmu_hv.c index f3158fb16de3..8c68145ba1bd 100644 --- a/arch/powerpc/kvm/book3s_64_mmu_hv.c +++ b/arch/powerpc/kvm/book3s_64_mmu_hv.c @@ -601,7 +601,7 @@ int kvmppc_book3s_hv_page_fault(struct kvm_run *run, struct kvm_vcpu *vcpu, hva, NULL, NULL); if (ptep) { pte = kvmppc_read_update_linux_pte(ptep, 1); - if (pte_write(pte)) + if (__pte_write(pte)) write_ok = 1; } local_irq_restore(flags); diff --git a/arch/powerpc/kvm/book3s_hv_rm_mmu.c b/arch/powerpc/kvm/book3s_hv_rm_mmu.c index 6fca970373ee..ce6f2121fffe 100644 --- a/arch/powerpc/kvm/book3s_hv_rm_mmu.c +++ b/arch/powerpc/kvm/book3s_hv_rm_mmu.c @@ -256,7 +256,7 @@ long kvmppc_do_h_enter(struct kvm *kvm, unsigned long flags, } pte = kvmppc_read_update_linux_pte(ptep, writing); if (pte_present(pte) && !pte_protnone(pte)) { - if (writing && !pte_write(pte)) + if (writing && !__pte_write(pte)) /* make the actual HPTE be read-only */ ptel = hpte_make_readonly(ptel); is_ci = pte_ci(pte); diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 0e649d72fe8d..2b5e09020cfe 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -20,6 +20,7 @@ obj64-y += copypage_64.o copyuser_64.o usercopy_64.o mem_64.o hweight_64.o \ obj64-$(CONFIG_SMP) += locks.o obj64-$(CONFIG_ALTIVEC) += vmx-helper.o +obj64-$(CONFIG_KPROBES_SANITY_TEST) += test_emulate_step.o obj-y += checksum_$(BITS).o checksum_wrappers.o diff --git a/arch/powerpc/lib/sstep.c b/arch/powerpc/lib/sstep.c index 846dba2c6360..9c542ec70c5b 100644 --- a/arch/powerpc/lib/sstep.c +++ b/arch/powerpc/lib/sstep.c @@ -1799,8 +1799,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) goto instr_done; case LARX: - if (regs->msr & MSR_LE) - return 0; if (op.ea & (size - 1)) break; /* can't handle misaligned */ if (!address_ok(regs, op.ea, size)) @@ -1823,8 +1821,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) goto ldst_done; case STCX: - if (regs->msr & MSR_LE) - return 0; if (op.ea & (size - 1)) break; /* can't handle misaligned */ if (!address_ok(regs, op.ea, size)) @@ -1849,8 +1845,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) goto ldst_done; case LOAD: - if (regs->msr & MSR_LE) - return 0; err = read_mem(®s->gpr[op.reg], op.ea, size, regs); if (!err) { if (op.type & SIGNEXT) @@ -1862,8 +1856,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) #ifdef CONFIG_PPC_FPU case LOAD_FP: - if (regs->msr & MSR_LE) - return 0; if (size == 4) err = do_fp_load(op.reg, do_lfs, op.ea, size, regs); else @@ -1872,15 +1864,11 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) #endif #ifdef CONFIG_ALTIVEC case LOAD_VMX: - if (regs->msr & MSR_LE) - return 0; err = do_vec_load(op.reg, do_lvx, op.ea & ~0xfUL, regs); goto ldst_done; #endif #ifdef CONFIG_VSX case LOAD_VSX: - if (regs->msr & MSR_LE) - return 0; err = do_vsx_load(op.reg, do_lxvd2x, op.ea, regs); goto ldst_done; #endif @@ -1903,8 +1891,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) goto instr_done; case STORE: - if (regs->msr & MSR_LE) - return 0; if ((op.type & UPDATE) && size == sizeof(long) && op.reg == 1 && op.update_reg == 1 && !(regs->msr & MSR_PR) && @@ -1917,8 +1903,6 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) #ifdef CONFIG_PPC_FPU case STORE_FP: - if (regs->msr & MSR_LE) - return 0; if (size == 4) err = do_fp_store(op.reg, do_stfs, op.ea, size, regs); else @@ -1927,15 +1911,11 @@ int __kprobes emulate_step(struct pt_regs *regs, unsigned int instr) #endif #ifdef CONFIG_ALTIVEC case STORE_VMX: - if (regs->msr & MSR_LE) - return 0; err = do_vec_store(op.reg, do_stvx, op.ea & ~0xfUL, regs); goto ldst_done; #endif #ifdef CONFIG_VSX case STORE_VSX: - if (regs->msr & MSR_LE) - return 0; err = do_vsx_store(op.reg, do_stxvd2x, op.ea, regs); goto ldst_done; #endif diff --git a/arch/powerpc/lib/test_emulate_step.c b/arch/powerpc/lib/test_emulate_step.c new file mode 100644 index 000000000000..2534c1447554 --- /dev/null +++ b/arch/powerpc/lib/test_emulate_step.c @@ -0,0 +1,434 @@ +/* + * Simple sanity test for emulate_step load/store instructions. + * + * Copyright IBM Corp. 2016 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#define pr_fmt(fmt) "emulate_step_test: " fmt + +#include <linux/ptrace.h> +#include <asm/sstep.h> +#include <asm/ppc-opcode.h> + +#define IMM_L(i) ((uintptr_t)(i) & 0xffff) + +/* + * Defined with TEST_ prefix so it does not conflict with other + * definitions. + */ +#define TEST_LD(r, base, i) (PPC_INST_LD | ___PPC_RT(r) | \ + ___PPC_RA(base) | IMM_L(i)) +#define TEST_LWZ(r, base, i) (PPC_INST_LWZ | ___PPC_RT(r) | \ + ___PPC_RA(base) | IMM_L(i)) +#define TEST_LWZX(t, a, b) (PPC_INST_LWZX | ___PPC_RT(t) | \ + ___PPC_RA(a) | ___PPC_RB(b)) +#define TEST_STD(r, base, i) (PPC_INST_STD | ___PPC_RS(r) | \ + ___PPC_RA(base) | ((i) & 0xfffc)) +#define TEST_LDARX(t, a, b, eh) (PPC_INST_LDARX | ___PPC_RT(t) | \ + ___PPC_RA(a) | ___PPC_RB(b) | \ + __PPC_EH(eh)) +#define TEST_STDCX(s, a, b) (PPC_INST_STDCX | ___PPC_RS(s) | \ + ___PPC_RA(a) | ___PPC_RB(b)) +#define TEST_LFSX(t, a, b) (PPC_INST_LFSX | ___PPC_RT(t) | \ + ___PPC_RA(a) | ___PPC_RB(b)) +#define TEST_STFSX(s, a, b) (PPC_INST_STFSX | ___PPC_RS(s) | \ + ___PPC_RA(a) | ___PPC_RB(b)) +#define TEST_LFDX(t, a, b) (PPC_INST_LFDX | ___PPC_RT(t) | \ + ___PPC_RA(a) | ___PPC_RB(b)) +#define TEST_STFDX(s, a, b) (PPC_INST_STFDX | ___PPC_RS(s) | \ + ___PPC_RA(a) | ___PPC_RB(b)) +#define TEST_LVX(t, a, b) (PPC_INST_LVX | ___PPC_RT(t) | \ + ___PPC_RA(a) | ___PPC_RB(b)) +#define TEST_STVX(s, a, b) (PPC_INST_STVX | ___PPC_RS(s) | \ + ___PPC_RA(a) | ___PPC_RB(b)) +#define TEST_LXVD2X(s, a, b) (PPC_INST_LXVD2X | VSX_XX1((s), R##a, R##b)) +#define TEST_STXVD2X(s, a, b) (PPC_INST_STXVD2X | VSX_XX1((s), R##a, R##b)) + + +static void __init init_pt_regs(struct pt_regs *regs) +{ + static unsigned long msr; + static bool msr_cached; + + memset(regs, 0, sizeof(struct pt_regs)); + + if (likely(msr_cached)) { + regs->msr = msr; + return; + } + + asm volatile("mfmsr %0" : "=r"(regs->msr)); + + regs->msr |= MSR_FP; + regs->msr |= MSR_VEC; + regs->msr |= MSR_VSX; + + msr = regs->msr; + msr_cached = true; +} + +static void __init show_result(char *ins, char *result) +{ + pr_info("%-14s : %s\n", ins, result); +} + +static void __init test_ld(void) +{ + struct pt_regs regs; + unsigned long a = 0x23; + int stepped = -1; + + init_pt_regs(®s); + regs.gpr[3] = (unsigned long) &a; + + /* ld r5, 0(r3) */ + stepped = emulate_step(®s, TEST_LD(5, 3, 0)); + + if (stepped == 1 && regs.gpr[5] == a) + show_result("ld", "PASS"); + else + show_result("ld", "FAIL"); +} + +static void __init test_lwz(void) +{ + struct pt_regs regs; + unsigned int a = 0x4545; + int stepped = -1; + + init_pt_regs(®s); + regs.gpr[3] = (unsigned long) &a; + + /* lwz r5, 0(r3) */ + stepped = emulate_step(®s, TEST_LWZ(5, 3, 0)); + + if (stepped == 1 && regs.gpr[5] == a) + show_result("lwz", "PASS"); + else + show_result("lwz", "FAIL"); +} + +static void __init test_lwzx(void) +{ + struct pt_regs regs; + unsigned int a[3] = {0x0, 0x0, 0x1234}; + int stepped = -1; + + init_pt_regs(®s); + regs.gpr[3] = (unsigned long) a; + regs.gpr[4] = 8; + regs.gpr[5] = 0x8765; + + /* lwzx r5, r3, r4 */ + stepped = emulate_step(®s, TEST_LWZX(5, 3, 4)); + if (stepped == 1 && regs.gpr[5] == a[2]) + show_result("lwzx", "PASS"); + else + show_result("lwzx", "FAIL"); +} + +static void __init test_std(void) +{ + struct pt_regs regs; + unsigned long a = 0x1234; + int stepped = -1; + + init_pt_regs(®s); + regs.gpr[3] = (unsigned long) &a; + regs.gpr[5] = 0x5678; + + /* std r5, 0(r3) */ + stepped = emulate_step(®s, TEST_STD(5, 3, 0)); + if (stepped == 1 || regs.gpr[5] == a) + show_result("std", "PASS"); + else + show_result("std", "FAIL"); +} + +static void __init test_ldarx_stdcx(void) +{ + struct pt_regs regs; + unsigned long a = 0x1234; + int stepped = -1; + unsigned long cr0_eq = 0x1 << 29; /* eq bit of CR0 */ + + init_pt_regs(®s); + asm volatile("mfcr %0" : "=r"(regs.ccr)); + + + /*** ldarx ***/ + + regs.gpr[3] = (unsigned long) &a; + regs.gpr[4] = 0; + regs.gpr[5] = 0x5678; + + /* ldarx r5, r3, r4, 0 */ + stepped = emulate_step(®s, TEST_LDARX(5, 3, 4, 0)); + + /* + * Don't touch 'a' here. Touching 'a' can do Load/store + * of 'a' which result in failure of subsequent stdcx. + * Instead, use hardcoded value for comparison. + */ + if (stepped <= 0 || regs.gpr[5] != 0x1234) { + show_result("ldarx / stdcx.", "FAIL (ldarx)"); + return; + } + + + /*** stdcx. ***/ + + regs.gpr[5] = 0x9ABC; + + /* stdcx. r5, r3, r4 */ + stepped = emulate_step(®s, TEST_STDCX(5, 3, 4)); + + /* + * Two possible scenarios that indicates successful emulation + * of stdcx. : + * 1. Reservation is active and store is performed. In this + * case cr0.eq bit will be set to 1. + * 2. Reservation is not active and store is not performed. + * In this case cr0.eq bit will be set to 0. + */ + if (stepped == 1 && ((regs.gpr[5] == a && (regs.ccr & cr0_eq)) + || (regs.gpr[5] != a && !(regs.ccr & cr0_eq)))) + show_result("ldarx / stdcx.", "PASS"); + else + show_result("ldarx / stdcx.", "FAIL (stdcx.)"); +} + +#ifdef CONFIG_PPC_FPU +static void __init test_lfsx_stfsx(void) +{ + struct pt_regs regs; + union { + float a; + int b; + } c; + int cached_b; + int stepped = -1; + + init_pt_regs(®s); + + + /*** lfsx ***/ + + c.a = 123.45; + cached_b = c.b; + + regs.gpr[3] = (unsigned long) &c.a; + regs.gpr[4] = 0; + + /* lfsx frt10, r3, r4 */ + stepped = emulate_step(®s, TEST_LFSX(10, 3, 4)); + + if (stepped == 1) + show_result("lfsx", "PASS"); + else + show_result("lfsx", "FAIL"); + + + /*** stfsx ***/ + + c.a = 678.91; + + /* stfsx frs10, r3, r4 */ + stepped = emulate_step(®s, TEST_STFSX(10, 3, 4)); + + if (stepped == 1 && c.b == cached_b) + show_result("stfsx", "PASS"); + else + show_result("stfsx", "FAIL"); +} + +static void __init test_lfdx_stfdx(void) +{ + struct pt_regs regs; + union { + double a; + long b; + } c; + long cached_b; + int stepped = -1; + + init_pt_regs(®s); + + + /*** lfdx ***/ + + c.a = 123456.78; + cached_b = c.b; + + regs.gpr[3] = (unsigned long) &c.a; + regs.gpr[4] = 0; + + /* lfdx frt10, r3, r4 */ + stepped = emulate_step(®s, TEST_LFDX(10, 3, 4)); + + if (stepped == 1) + show_result("lfdx", "PASS"); + else + show_result("lfdx", "FAIL"); + + + /*** stfdx ***/ + + c.a = 987654.32; + + /* stfdx frs10, r3, r4 */ + stepped = emulate_step(®s, TEST_STFDX(10, 3, 4)); + + if (stepped == 1 && c.b == cached_b) + show_result("stfdx", "PASS"); + else + show_result("stfdx", "FAIL"); +} +#else +static void __init test_lfsx_stfsx(void) +{ + show_result("lfsx", "SKIP (CONFIG_PPC_FPU is not set)"); + show_result("stfsx", "SKIP (CONFIG_PPC_FPU is not set)"); +} + +static void __init test_lfdx_stfdx(void) +{ + show_result("lfdx", "SKIP (CONFIG_PPC_FPU is not set)"); + show_result("stfdx", "SKIP (CONFIG_PPC_FPU is not set)"); +} +#endif /* CONFIG_PPC_FPU */ + +#ifdef CONFIG_ALTIVEC +static void __init test_lvx_stvx(void) +{ + struct pt_regs regs; + union { + vector128 a; + u32 b[4]; + } c; + u32 cached_b[4]; + int stepped = -1; + + init_pt_regs(®s); + + + /*** lvx ***/ + + cached_b[0] = c.b[0] = 923745; + cached_b[1] = c.b[1] = 2139478; + cached_b[2] = c.b[2] = 9012; + cached_b[3] = c.b[3] = 982134; + + regs.gpr[3] = (unsigned long) &c.a; + regs.gpr[4] = 0; + + /* lvx vrt10, r3, r4 */ + stepped = emulate_step(®s, TEST_LVX(10, 3, 4)); + + if (stepped == 1) + show_result("lvx", "PASS"); + else + show_result("lvx", "FAIL"); + + + /*** stvx ***/ + + c.b[0] = 4987513; + c.b[1] = 84313948; + c.b[2] = 71; + c.b[3] = 498532; + + /* stvx vrs10, r3, r4 */ + stepped = emulate_step(®s, TEST_STVX(10, 3, 4)); + + if (stepped == 1 && cached_b[0] == c.b[0] && cached_b[1] == c.b[1] && + cached_b[2] == c.b[2] && cached_b[3] == c.b[3]) + show_result("stvx", "PASS"); + else + show_result("stvx", "FAIL"); +} +#else +static void __init test_lvx_stvx(void) +{ + show_result("lvx", "SKIP (CONFIG_ALTIVEC is not set)"); + show_result("stvx", "SKIP (CONFIG_ALTIVEC is not set)"); +} +#endif /* CONFIG_ALTIVEC */ + +#ifdef CONFIG_VSX +static void __init test_lxvd2x_stxvd2x(void) +{ + struct pt_regs regs; + union { + vector128 a; + u32 b[4]; + } c; + u32 cached_b[4]; + int stepped = -1; + + init_pt_regs(®s); + + + /*** lxvd2x ***/ + + cached_b[0] = c.b[0] = 18233; + cached_b[1] = c.b[1] = 34863571; + cached_b[2] = c.b[2] = 834; + cached_b[3] = c.b[3] = 6138911; + + regs.gpr[3] = (unsigned long) &c.a; + regs.gpr[4] = 0; + + /* lxvd2x vsr39, r3, r4 */ + stepped = emulate_step(®s, TEST_LXVD2X(39, 3, 4)); + + if (stepped == 1) + show_result("lxvd2x", "PASS"); + else + show_result("lxvd2x", "FAIL"); + + + /*** stxvd2x ***/ + + c.b[0] = 21379463; + c.b[1] = 87; + c.b[2] = 374234; + c.b[3] = 4; + + /* stxvd2x vsr39, r3, r4 */ + stepped = emulate_step(®s, TEST_STXVD2X(39, 3, 4)); + + if (stepped == 1 && cached_b[0] == c.b[0] && cached_b[1] == c.b[1] && + cached_b[2] == c.b[2] && cached_b[3] == c.b[3]) + show_result("stxvd2x", "PASS"); + else + show_result("stxvd2x", "FAIL"); +} +#else +static void __init test_lxvd2x_stxvd2x(void) +{ + show_result("lxvd2x", "SKIP (CONFIG_VSX is not set)"); + show_result("stxvd2x", "SKIP (CONFIG_VSX is not set)"); +} +#endif /* CONFIG_VSX */ + +static int __init test_emulate_step(void) +{ + test_ld(); + test_lwz(); + test_lwzx(); + test_std(); + test_ldarx_stdcx(); + test_lfsx_stfsx(); + test_lfdx_stfdx(); + test_lvx_stvx(); + test_lxvd2x_stxvd2x(); + + return 0; +} +late_initcall(test_emulate_step); diff --git a/arch/powerpc/mm/init_64.c b/arch/powerpc/mm/init_64.c index 6aa3b76aa0d6..9be992083d2a 100644 --- a/arch/powerpc/mm/init_64.c +++ b/arch/powerpc/mm/init_64.c @@ -356,18 +356,42 @@ static void early_check_vec5(void) unsigned long root, chosen; int size; const u8 *vec5; + u8 mmu_supported; root = of_get_flat_dt_root(); chosen = of_get_flat_dt_subnode_by_name(root, "chosen"); - if (chosen == -FDT_ERR_NOTFOUND) + if (chosen == -FDT_ERR_NOTFOUND) { + cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX; return; + } vec5 = of_get_flat_dt_prop(chosen, "ibm,architecture-vec-5", &size); - if (!vec5) + if (!vec5) { + cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX; return; - if (size <= OV5_INDX(OV5_MMU_RADIX_300) || - !(vec5[OV5_INDX(OV5_MMU_RADIX_300)] & OV5_FEAT(OV5_MMU_RADIX_300))) - /* Hypervisor doesn't support radix */ + } + if (size <= OV5_INDX(OV5_MMU_SUPPORT)) { cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX; + return; + } + + /* Check for supported configuration */ + mmu_supported = vec5[OV5_INDX(OV5_MMU_SUPPORT)] & + OV5_FEAT(OV5_MMU_SUPPORT); + if (mmu_supported == OV5_FEAT(OV5_MMU_RADIX)) { + /* Hypervisor only supports radix - check enabled && GTSE */ + if (!early_radix_enabled()) { + pr_warn("WARNING: Ignoring cmdline option disable_radix\n"); + } + if (!(vec5[OV5_INDX(OV5_RADIX_GTSE)] & + OV5_FEAT(OV5_RADIX_GTSE))) { + pr_warn("WARNING: Hypervisor doesn't support RADIX with GTSE\n"); + } + /* Do radix anyway - the hypervisor said we had to */ + cur_cpu_spec->mmu_features |= MMU_FTR_TYPE_RADIX; + } else if (mmu_supported == OV5_FEAT(OV5_MMU_HASH)) { + /* Hypervisor only supports hash - disable radix */ + cur_cpu_spec->mmu_features &= ~MMU_FTR_TYPE_RADIX; + } } void __init mmu_early_init_devtree(void) @@ -383,7 +407,7 @@ void __init mmu_early_init_devtree(void) * even though the ibm,architecture-vec-5 property created by * skiboot doesn't have the necessary bits set. */ - if (early_radix_enabled() && !(mfmsr() & MSR_HV)) + if (!(mfmsr() & MSR_HV)) early_check_vec5(); if (early_radix_enabled()) diff --git a/arch/powerpc/mm/pgtable-radix.c b/arch/powerpc/mm/pgtable-radix.c index 2a590a98e652..c28165d8970b 100644 --- a/arch/powerpc/mm/pgtable-radix.c +++ b/arch/powerpc/mm/pgtable-radix.c @@ -186,6 +186,10 @@ static void __init radix_init_pgtable(void) */ register_process_table(__pa(process_tb), 0, PRTB_SIZE_SHIFT - 12); pr_info("Process table %p and radix root for kernel: %p\n", process_tb, init_mm.pgd); + asm volatile("ptesync" : : : "memory"); + asm volatile(PPC_TLBIE_5(%0,%1,2,1,1) : : + "r" (TLBIEL_INVAL_SET_LPID), "r" (0)); + asm volatile("eieio; tlbsync; ptesync" : : : "memory"); } static void __init radix_init_partition_table(void) diff --git a/arch/powerpc/platforms/powernv/opal-wrappers.S b/arch/powerpc/platforms/powernv/opal-wrappers.S index 6693f75e93d1..da8a0f7a035c 100644 --- a/arch/powerpc/platforms/powernv/opal-wrappers.S +++ b/arch/powerpc/platforms/powernv/opal-wrappers.S @@ -39,8 +39,8 @@ opal_tracepoint_refcount: BEGIN_FTR_SECTION; \ b 1f; \ END_FTR_SECTION(0, 1); \ - ld r12,opal_tracepoint_refcount@toc(r2); \ - cmpdi r12,0; \ + ld r11,opal_tracepoint_refcount@toc(r2); \ + cmpdi r11,0; \ bne- LABEL; \ 1: diff --git a/arch/powerpc/purgatory/trampoline.S b/arch/powerpc/purgatory/trampoline.S index f9760ccf4032..3696ea6c4826 100644 --- a/arch/powerpc/purgatory/trampoline.S +++ b/arch/powerpc/purgatory/trampoline.S @@ -116,13 +116,13 @@ dt_offset: .data .balign 8 -.globl sha256_digest -sha256_digest: +.globl purgatory_sha256_digest +purgatory_sha256_digest: .skip 32 - .size sha256_digest, . - sha256_digest + .size purgatory_sha256_digest, . - purgatory_sha256_digest .balign 8 -.globl sha_regions -sha_regions: +.globl purgatory_sha_regions +purgatory_sha_regions: .skip 8 * 2 * 16 - .size sha_regions, . - sha_regions + .size purgatory_sha_regions, . - purgatory_sha_regions diff --git a/arch/powerpc/sysdev/axonram.c b/arch/powerpc/sysdev/axonram.c index ada29eaed6e2..f523ac883150 100644 --- a/arch/powerpc/sysdev/axonram.c +++ b/arch/powerpc/sysdev/axonram.c @@ -274,7 +274,9 @@ failed: if (bank->disk->major > 0) unregister_blkdev(bank->disk->major, bank->disk->disk_name); - del_gendisk(bank->disk); + if (bank->disk->flags & GENHD_FL_UP) + del_gendisk(bank->disk); + put_disk(bank->disk); } device->dev.platform_data = NULL; if (bank->io_addr != 0) @@ -299,6 +301,7 @@ axon_ram_remove(struct platform_device *device) device_remove_file(&device->dev, &dev_attr_ecc); free_irq(bank->irq_id, device); del_gendisk(bank->disk); + put_disk(bank->disk); iounmap((void __iomem *) bank->io_addr); kfree(bank); diff --git a/arch/powerpc/sysdev/xics/icp-opal.c b/arch/powerpc/sysdev/xics/icp-opal.c index f9670eabfcfa..b53f80f0b4d8 100644 --- a/arch/powerpc/sysdev/xics/icp-opal.c +++ b/arch/powerpc/sysdev/xics/icp-opal.c @@ -91,6 +91,16 @@ static unsigned int icp_opal_get_irq(void) static void icp_opal_set_cpu_priority(unsigned char cppr) { + /* + * Here be dragons. The caller has asked to allow only IPI's and not + * external interrupts. But OPAL XIVE doesn't support that. So instead + * of allowing no interrupts allow all. That's still not right, but + * currently the only caller who does this is xics_migrate_irqs_away() + * and it works in that case. + */ + if (cppr >= DEFAULT_PRIORITY) + cppr = LOWEST_PRIORITY; + xics_set_base_cppr(cppr); opal_int_set_cppr(cppr); iosync(); diff --git a/arch/powerpc/sysdev/xics/xics-common.c b/arch/powerpc/sysdev/xics/xics-common.c index 69d858e51ac7..23efe4e42172 100644 --- a/arch/powerpc/sysdev/xics/xics-common.c +++ b/arch/powerpc/sysdev/xics/xics-common.c @@ -20,6 +20,7 @@ #include <linux/of.h> #include <linux/slab.h> #include <linux/spinlock.h> +#include <linux/delay.h> #include <asm/prom.h> #include <asm/io.h> @@ -198,9 +199,6 @@ void xics_migrate_irqs_away(void) /* Remove ourselves from the global interrupt queue */ xics_set_cpu_giq(xics_default_distrib_server, 0); - /* Allow IPIs again... */ - icp_ops->set_priority(DEFAULT_PRIORITY); - for_each_irq_desc(virq, desc) { struct irq_chip *chip; long server; @@ -255,6 +253,19 @@ void xics_migrate_irqs_away(void) unlock: raw_spin_unlock_irqrestore(&desc->lock, flags); } + + /* Allow "sufficient" time to drop any inflight IRQ's */ + mdelay(5); + + /* + * Allow IPIs again. This is done at the very end, after migrating all + * interrupts, the expectation is that we'll only get woken up by an IPI + * interrupt beyond this point, but leave externals masked just to be + * safe. If we're using icp-opal this may actually allow all + * interrupts anyway, but that should be OK. + */ + icp_ops->set_priority(DEFAULT_PRIORITY); + } #endif /* CONFIG_HOTPLUG_CPU */ diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig index 143b1e00b818..4b176fe83da4 100644 --- a/arch/s390/configs/default_defconfig +++ b/arch/s390/configs/default_defconfig @@ -609,7 +609,7 @@ CONFIG_SCHED_TRACER=y CONFIG_FTRACE_SYSCALLS=y CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_UPROBE_EVENT=y +CONFIG_UPROBE_EVENTS=y CONFIG_FUNCTION_PROFILER=y CONFIG_HIST_TRIGGERS=y CONFIG_TRACE_ENUM_MAP_FILE=y diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig index f05d2d6e1087..0de46cc397f6 100644 --- a/arch/s390/configs/gcov_defconfig +++ b/arch/s390/configs/gcov_defconfig @@ -560,7 +560,7 @@ CONFIG_SCHED_TRACER=y CONFIG_FTRACE_SYSCALLS=y CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_UPROBE_EVENT=y +CONFIG_UPROBE_EVENTS=y CONFIG_FUNCTION_PROFILER=y CONFIG_HIST_TRIGGERS=y CONFIG_TRACE_ENUM_MAP_FILE=y diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig index 2358bf33c5ef..e167557b434c 100644 --- a/arch/s390/configs/performance_defconfig +++ b/arch/s390/configs/performance_defconfig @@ -558,7 +558,7 @@ CONFIG_SCHED_TRACER=y CONFIG_FTRACE_SYSCALLS=y CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_UPROBE_EVENT=y +CONFIG_UPROBE_EVENTS=y CONFIG_FUNCTION_PROFILER=y CONFIG_HIST_TRIGGERS=y CONFIG_TRACE_ENUM_MAP_FILE=y diff --git a/arch/s390/crypto/paes_s390.c b/arch/s390/crypto/paes_s390.c index d69ea495c4d7..716b17238599 100644 --- a/arch/s390/crypto/paes_s390.c +++ b/arch/s390/crypto/paes_s390.c @@ -474,8 +474,11 @@ static int ctr_paes_crypt(struct blkcipher_desc *desc, unsigned long modifier, ret = blkcipher_walk_done(desc, walk, nbytes - n); } if (k < n) { - if (__ctr_paes_set_key(ctx) != 0) + if (__ctr_paes_set_key(ctx) != 0) { + if (locked) + spin_unlock(&ctrblk_lock); return blkcipher_walk_done(desc, walk, -EIO); + } } } if (locked) diff --git a/arch/s390/defconfig b/arch/s390/defconfig index 68bfd09f1b02..97189dbaf34b 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -179,7 +179,7 @@ CONFIG_FTRACE_SYSCALLS=y CONFIG_TRACER_SNAPSHOT_PER_CPU_SWAP=y CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y -CONFIG_UPROBE_EVENT=y +CONFIG_UPROBE_EVENTS=y CONFIG_FUNCTION_PROFILER=y CONFIG_TRACE_ENUM_MAP_FILE=y CONFIG_KPROBES_SANITY_TEST=y diff --git a/arch/s390/include/asm/cputime.h b/arch/s390/include/asm/cputime.h index d1c407ddf703..9072bf63a846 100644 --- a/arch/s390/include/asm/cputime.h +++ b/arch/s390/include/asm/cputime.h @@ -8,31 +8,27 @@ #define _S390_CPUTIME_H #include <linux/types.h> -#include <asm/div64.h> +#include <asm/timex.h> #define CPUTIME_PER_USEC 4096ULL #define CPUTIME_PER_SEC (CPUTIME_PER_USEC * USEC_PER_SEC) /* We want to use full resolution of the CPU timer: 2**-12 micro-seconds. */ -typedef unsigned long long __nocast cputime_t; -typedef unsigned long long __nocast cputime64_t; - #define cmpxchg_cputime(ptr, old, new) cmpxchg64(ptr, old, new) -static inline unsigned long __div(unsigned long long n, unsigned long base) -{ - return n / base; -} - /* - * Convert cputime to microseconds and back. + * Convert cputime to microseconds. */ -static inline unsigned int cputime_to_usecs(const cputime_t cputime) +static inline u64 cputime_to_usecs(const u64 cputime) { - return (__force unsigned long long) cputime >> 12; + return cputime >> 12; } +/* + * Convert cputime to nanoseconds. + */ +#define cputime_to_nsecs(cputime) tod_to_ns(cputime) u64 arch_cpu_idle_time(int cpu); diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 7ed1972b1920..93e37b12e882 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -24,6 +24,7 @@ * the S390 page table tree. */ #ifndef __ASSEMBLY__ +#include <asm-generic/5level-fixup.h> #include <linux/sched.h> #include <linux/mm_types.h> #include <linux/page-flags.h> diff --git a/arch/s390/include/asm/timex.h b/arch/s390/include/asm/timex.h index 354344dcc198..118535123f34 100644 --- a/arch/s390/include/asm/timex.h +++ b/arch/s390/include/asm/timex.h @@ -206,20 +206,16 @@ static inline unsigned long long get_tod_clock_monotonic(void) * ns = (todval * 125) >> 9; * * In order to avoid an overflow with the multiplication we can rewrite this. - * With a split todval == 2^32 * th + tl (th upper 32 bits, tl lower 32 bits) + * With a split todval == 2^9 * th + tl (th upper 55 bits, tl lower 9 bits) * we end up with * - * ns = ((2^32 * th + tl) * 125 ) >> 9; - * -> ns = (2^23 * th * 125) + ((tl * 125) >> 9); + * ns = ((2^9 * th + tl) * 125 ) >> 9; + * -> ns = (th * 125) + ((tl * 125) >> 9); * */ static inline unsigned long long tod_to_ns(unsigned long long todval) { - unsigned long long ns; - - ns = ((todval >> 32) << 23) * 125; - ns += ((todval & 0xffffffff) * 125) >> 9; - return ns; + return ((todval >> 9) * 125) + (((todval & 0x1ff) * 125) >> 9); } #endif diff --git a/arch/s390/include/uapi/asm/unistd.h b/arch/s390/include/uapi/asm/unistd.h index 4384bc797a54..152de9b796e1 100644 --- a/arch/s390/include/uapi/asm/unistd.h +++ b/arch/s390/include/uapi/asm/unistd.h @@ -313,7 +313,9 @@ #define __NR_copy_file_range 375 #define __NR_preadv2 376 #define __NR_pwritev2 377 -#define NR_syscalls 378 +/* Number 378 is reserved for guarded storage */ +#define __NR_statx 379 +#define NR_syscalls 380 /* * There are some system calls that are not present on 64 bit, some diff --git a/arch/s390/kernel/compat_wrapper.c b/arch/s390/kernel/compat_wrapper.c index ae2cda5eee5a..e89cc2e71db1 100644 --- a/arch/s390/kernel/compat_wrapper.c +++ b/arch/s390/kernel/compat_wrapper.c @@ -178,3 +178,4 @@ COMPAT_SYSCALL_WRAP3(getpeername, int, fd, struct sockaddr __user *, usockaddr, COMPAT_SYSCALL_WRAP6(sendto, int, fd, void __user *, buff, size_t, len, unsigned int, flags, struct sockaddr __user *, addr, int, addr_len); COMPAT_SYSCALL_WRAP3(mlock2, unsigned long, start, size_t, len, int, flags); COMPAT_SYSCALL_WRAP6(copy_file_range, int, fd_in, loff_t __user *, off_in, int, fd_out, loff_t __user *, off_out, size_t, len, unsigned int, flags); +COMPAT_SYSCALL_WRAP5(statx, int, dfd, const char __user *, path, unsigned, flags, unsigned, mask, struct statx __user *, buffer); diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S index dff2152350a7..6a7d737d514c 100644 --- a/arch/s390/kernel/entry.S +++ b/arch/s390/kernel/entry.S @@ -490,7 +490,7 @@ ENTRY(pgm_check_handler) jnz .Lpgm_svcper # -> single stepped svc 1: CHECK_STACK STACK_SIZE,__LC_SAVE_AREA_SYNC aghi %r15,-(STACK_FRAME_OVERHEAD + __PT_SIZE) - j 3f + j 4f 2: UPDATE_VTIME %r14,%r15,__LC_SYNC_ENTER_TIMER lg %r15,__LC_KERNEL_STACK lgr %r14,%r12 @@ -499,8 +499,8 @@ ENTRY(pgm_check_handler) tm __LC_PGM_ILC+2,0x02 # check for transaction abort jz 3f mvc __THREAD_trap_tdb(256,%r14),0(%r13) -3: la %r11,STACK_FRAME_OVERHEAD(%r15) - stg %r10,__THREAD_last_break(%r14) +3: stg %r10,__THREAD_last_break(%r14) +4: la %r11,STACK_FRAME_OVERHEAD(%r15) stmg %r0,%r7,__PT_R0(%r11) mvc __PT_R8(64,%r11),__LC_SAVE_AREA_SYNC stmg %r8,%r9,__PT_PSW(%r11) @@ -509,14 +509,14 @@ ENTRY(pgm_check_handler) xc __PT_FLAGS(8,%r11),__PT_FLAGS(%r11) stg %r10,__PT_ARGS(%r11) tm __LC_PGM_ILC+3,0x80 # check for per exception - jz 4f + jz 5f tmhh %r8,0x0001 # kernel per event ? jz .Lpgm_kprobe oi __PT_FLAGS+7(%r11),_PIF_PER_TRAP mvc __THREAD_per_address(8,%r14),__LC_PER_ADDRESS mvc __THREAD_per_cause(2,%r14),__LC_PER_CODE mvc __THREAD_per_paid(1,%r14),__LC_PER_ACCESS_ID -4: REENABLE_IRQS +5: REENABLE_IRQS xc __SF_BACKCHAIN(8,%r15),__SF_BACKCHAIN(%r15) larl %r1,pgm_check_table llgh %r10,__PT_INT_CODE+2(%r11) diff --git a/arch/s390/kernel/ipl.c b/arch/s390/kernel/ipl.c index b67dafb7b7cf..e545ffe5155a 100644 --- a/arch/s390/kernel/ipl.c +++ b/arch/s390/kernel/ipl.c @@ -564,6 +564,8 @@ static struct kset *ipl_kset; static void __ipl_run(void *unused) { + if (MACHINE_IS_LPAR && ipl_info.type == IPL_TYPE_CCW) + diag308(DIAG308_LOAD_NORMAL_DUMP, NULL); diag308(DIAG308_LOAD_CLEAR, NULL); if (MACHINE_IS_VM) __cpcmd("IPL", NULL, 0, NULL); diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c index 20cd339e11ae..f29e41c5e2ec 100644 --- a/arch/s390/kernel/process.c +++ b/arch/s390/kernel/process.c @@ -124,7 +124,10 @@ int copy_thread_tls(unsigned long clone_flags, unsigned long new_stackp, clear_tsk_thread_flag(p, TIF_SINGLE_STEP); /* Initialize per thread user and system timer values */ p->thread.user_timer = 0; + p->thread.guest_timer = 0; p->thread.system_timer = 0; + p->thread.hardirq_timer = 0; + p->thread.softirq_timer = 0; frame->sf.back_chain = 0; /* new return point is ret_from_fork */ diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 9b59e6212d8f..2659b5cfeddb 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -386,3 +386,5 @@ SYSCALL(sys_mlock2,compat_sys_mlock2) SYSCALL(sys_copy_file_range,compat_sys_copy_file_range) /* 375 */ SYSCALL(sys_preadv2,compat_sys_preadv2) SYSCALL(sys_pwritev2,compat_sys_pwritev2) +NI_SYSCALL +SYSCALL(sys_statx,compat_sys_statx) diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index c14fc9029912..072d84ba42a3 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -111,7 +111,7 @@ static inline u64 scale_vtime(u64 vtime) } static void account_system_index_scaled(struct task_struct *p, - cputime_t cputime, cputime_t scaled, + u64 cputime, u64 scaled, enum cpu_usage_stat index) { p->stimescaled += cputime_to_nsecs(scaled); diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index b48dc5f1900b..463e5ef02304 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -608,12 +608,29 @@ void ptep_zap_key(struct mm_struct *mm, unsigned long addr, pte_t *ptep) bool test_and_clear_guest_dirty(struct mm_struct *mm, unsigned long addr) { spinlock_t *ptl; + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; pgste_t pgste; pte_t *ptep; pte_t pte; bool dirty; - ptep = get_locked_pte(mm, addr, &ptl); + pgd = pgd_offset(mm, addr); + pud = pud_alloc(mm, pgd, addr); + if (!pud) + return false; + pmd = pmd_alloc(mm, pud, addr); + if (!pmd) + return false; + /* We can't run guests backed by huge pages, but userspace can + * still set them up and then try to migrate them without any + * migration support. + */ + if (pmd_large(*pmd)) + return true; + + ptep = pte_alloc_map_lock(mm, pmd, addr, &ptl); if (unlikely(!ptep)) return false; diff --git a/arch/score/include/asm/pgtable.h b/arch/score/include/asm/pgtable.h index 0553e5cd5985..46ff8fd678a7 100644 --- a/arch/score/include/asm/pgtable.h +++ b/arch/score/include/asm/pgtable.h @@ -2,6 +2,7 @@ #define _ASM_SCORE_PGTABLE_H #include <linux/const.h> +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #include <asm/fixmap.h> diff --git a/arch/score/kernel/traps.c b/arch/score/kernel/traps.c index e359ec675869..12daf45369b4 100644 --- a/arch/score/kernel/traps.c +++ b/arch/score/kernel/traps.c @@ -24,6 +24,7 @@ */ #include <linux/extable.h> +#include <linux/ptrace.h> #include <linux/sched/mm.h> #include <linux/sched/signal.h> #include <linux/sched/debug.h> diff --git a/arch/score/mm/extable.c b/arch/score/mm/extable.c index ec871355fc2d..6736a3ad6286 100644 --- a/arch/score/mm/extable.c +++ b/arch/score/mm/extable.c @@ -24,6 +24,8 @@ */ #include <linux/extable.h> +#include <linux/ptrace.h> +#include <asm/extable.h> int fixup_exception(struct pt_regs *regs) { diff --git a/arch/sh/boards/mach-cayman/setup.c b/arch/sh/boards/mach-cayman/setup.c index 340fd40b381d..9c292c27e0d7 100644 --- a/arch/sh/boards/mach-cayman/setup.c +++ b/arch/sh/boards/mach-cayman/setup.c @@ -128,7 +128,6 @@ static int __init smsc_superio_setup(void) SMSC_SUPERIO_WRITE_INDEXED(1, SMSC_PRIMARY_INT_INDEX); SMSC_SUPERIO_WRITE_INDEXED(12, SMSC_SECONDARY_INT_INDEX); -#ifdef CONFIG_IDE /* * Only IDE1 exists on the Cayman */ @@ -158,7 +157,6 @@ static int __init smsc_superio_setup(void) SMSC_SUPERIO_WRITE_INDEXED(0x01, 0xc5); /* GP45 = IDE1_IRQ */ SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc6); /* GP46 = nIOROP */ SMSC_SUPERIO_WRITE_INDEXED(0x00, 0xc7); /* GP47 = nIOWOP */ -#endif /* Exit the configuration state */ outb(SMSC_EXIT_CONFIG_KEY, SMSC_CONFIG_PORT_ADDR); diff --git a/arch/sh/include/asm/pgtable-2level.h b/arch/sh/include/asm/pgtable-2level.h index 19bd89db17e7..f75cf4387257 100644 --- a/arch/sh/include/asm/pgtable-2level.h +++ b/arch/sh/include/asm/pgtable-2level.h @@ -1,6 +1,7 @@ #ifndef __ASM_SH_PGTABLE_2LEVEL_H #define __ASM_SH_PGTABLE_2LEVEL_H +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> /* diff --git a/arch/sh/include/asm/pgtable-3level.h b/arch/sh/include/asm/pgtable-3level.h index 249a985d9648..9b1e776eca31 100644 --- a/arch/sh/include/asm/pgtable-3level.h +++ b/arch/sh/include/asm/pgtable-3level.h @@ -1,6 +1,7 @@ #ifndef __ASM_SH_PGTABLE_3LEVEL_H #define __ASM_SH_PGTABLE_3LEVEL_H +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopud.h> /* diff --git a/arch/sparc/include/asm/pgtable_64.h b/arch/sparc/include/asm/pgtable_64.h index 56e49c8f770d..8a598528ec1f 100644 --- a/arch/sparc/include/asm/pgtable_64.h +++ b/arch/sparc/include/asm/pgtable_64.h @@ -12,6 +12,7 @@ * the SpitFire page tables. */ +#include <asm-generic/5level-fixup.h> #include <linux/compiler.h> #include <linux/const.h> #include <asm/types.h> diff --git a/arch/tile/include/asm/pgtable_32.h b/arch/tile/include/asm/pgtable_32.h index d26a42279036..5f8c615cb5e9 100644 --- a/arch/tile/include/asm/pgtable_32.h +++ b/arch/tile/include/asm/pgtable_32.h @@ -74,6 +74,7 @@ extern unsigned long VMALLOC_RESERVE /* = CONFIG_VMALLOC_RESERVE */; #define MAXMEM (_VMALLOC_START - PAGE_OFFSET) /* We have no pmd or pud since we are strictly a two-level page table */ +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> static inline int pud_huge_page(pud_t pud) { return 0; } diff --git a/arch/tile/include/asm/pgtable_64.h b/arch/tile/include/asm/pgtable_64.h index e96cec52f6d8..96fe58b45118 100644 --- a/arch/tile/include/asm/pgtable_64.h +++ b/arch/tile/include/asm/pgtable_64.h @@ -59,6 +59,7 @@ #ifndef __ASSEMBLY__ /* We have no pud since we are a three-level page table. */ +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopud.h> /* diff --git a/arch/um/include/asm/pgtable-2level.h b/arch/um/include/asm/pgtable-2level.h index cfbe59752469..179c0ea87a0c 100644 --- a/arch/um/include/asm/pgtable-2level.h +++ b/arch/um/include/asm/pgtable-2level.h @@ -8,6 +8,7 @@ #ifndef __UM_PGTABLE_2LEVEL_H #define __UM_PGTABLE_2LEVEL_H +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> /* PGDIR_SHIFT determines what a third-level page table entry can map */ diff --git a/arch/um/include/asm/pgtable-3level.h b/arch/um/include/asm/pgtable-3level.h index bae8523a162f..c4d876dfb9ac 100644 --- a/arch/um/include/asm/pgtable-3level.h +++ b/arch/um/include/asm/pgtable-3level.h @@ -7,6 +7,7 @@ #ifndef __UM_PGTABLE_3LEVEL_H #define __UM_PGTABLE_3LEVEL_H +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopud.h> /* PGDIR_SHIFT determines what a third-level page table entry can map */ diff --git a/arch/unicore32/include/asm/pgtable.h b/arch/unicore32/include/asm/pgtable.h index 818d0f5598e3..a4f2bef37e70 100644 --- a/arch/unicore32/include/asm/pgtable.h +++ b/arch/unicore32/include/asm/pgtable.h @@ -12,6 +12,7 @@ #ifndef __UNICORE_PGTABLE_H__ #define __UNICORE_PGTABLE_H__ +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #include <asm/cpu-single.h> diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 7ef4a099defc..6205d3b81e6d 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -176,6 +176,7 @@ CONFIG_E1000E=y CONFIG_SKY2=y CONFIG_FORCEDETH=y CONFIG_8139TOO=y +CONFIG_R8169=y CONFIG_FDDI=y CONFIG_INPUT_POLLDEV=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set diff --git a/arch/x86/events/amd/core.c b/arch/x86/events/amd/core.c index afb222b63cae..c84584bb9402 100644 --- a/arch/x86/events/amd/core.c +++ b/arch/x86/events/amd/core.c @@ -604,7 +604,7 @@ amd_get_event_constraints_f15h(struct cpu_hw_events *cpuc, int idx, return &amd_f15_PMC20; } case AMD_EVENT_NB: - /* moved to perf_event_amd_uncore.c */ + /* moved to uncore.c */ return &emptyconstraint; default: return &emptyconstraint; diff --git a/arch/x86/events/intel/cstate.c b/arch/x86/events/intel/cstate.c index aff4b5b69d40..238ae3248ba5 100644 --- a/arch/x86/events/intel/cstate.c +++ b/arch/x86/events/intel/cstate.c @@ -1,5 +1,5 @@ /* - * perf_event_intel_cstate.c: support cstate residency counters + * Support cstate residency counters * * Copyright (C) 2015, Intel Corp. * Author: Kan Liang (kan.liang@intel.com) diff --git a/arch/x86/events/intel/rapl.c b/arch/x86/events/intel/rapl.c index 22054ca49026..9d05c7e67f60 100644 --- a/arch/x86/events/intel/rapl.c +++ b/arch/x86/events/intel/rapl.c @@ -1,5 +1,5 @@ /* - * perf_event_intel_rapl.c: support Intel RAPL energy consumption counters + * Support Intel RAPL energy consumption counters * Copyright (C) 2013 Google, Inc., Stephane Eranian * * Intel RAPL interface is specified in the IA-32 Manual Vol3b diff --git a/arch/x86/events/intel/uncore.h b/arch/x86/events/intel/uncore.h index ad986c1e29bc..df5989f27b1b 100644 --- a/arch/x86/events/intel/uncore.h +++ b/arch/x86/events/intel/uncore.h @@ -360,7 +360,7 @@ extern struct list_head pci2phy_map_head; extern struct pci_extra_dev *uncore_extra_pci_dev; extern struct event_constraint uncore_constraint_empty; -/* perf_event_intel_uncore_snb.c */ +/* uncore_snb.c */ int snb_uncore_pci_init(void); int ivb_uncore_pci_init(void); int hsw_uncore_pci_init(void); @@ -371,7 +371,7 @@ void nhm_uncore_cpu_init(void); void skl_uncore_cpu_init(void); int snb_pci2phy_map_init(int devid); -/* perf_event_intel_uncore_snbep.c */ +/* uncore_snbep.c */ int snbep_uncore_pci_init(void); void snbep_uncore_cpu_init(void); int ivbep_uncore_pci_init(void); @@ -385,5 +385,5 @@ void knl_uncore_cpu_init(void); int skx_uncore_pci_init(void); void skx_uncore_cpu_init(void); -/* perf_event_intel_uncore_nhmex.c */ +/* uncore_nhmex.c */ void nhmex_uncore_cpu_init(void); diff --git a/arch/x86/hyperv/hv_init.c b/arch/x86/hyperv/hv_init.c index db64baf0e500..8bef70e7f3cc 100644 --- a/arch/x86/hyperv/hv_init.c +++ b/arch/x86/hyperv/hv_init.c @@ -158,13 +158,13 @@ void hyperv_init(void) clocksource_register_hz(&hyperv_cs_tsc, NSEC_PER_SEC/100); return; } +register_msr_cs: #endif /* * For 32 bit guests just use the MSR based mechanism for reading * the partition counter. */ -register_msr_cs: hyperv_cs = &hyperv_cs_msr; if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE) clocksource_register_hz(&hyperv_cs_msr, NSEC_PER_SEC/100); diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h index 4e7772387c6e..b04bb6dfed7f 100644 --- a/arch/x86/include/asm/cpufeatures.h +++ b/arch/x86/include/asm/cpufeatures.h @@ -289,7 +289,8 @@ #define X86_FEATURE_PKU (16*32+ 3) /* Protection Keys for Userspace */ #define X86_FEATURE_OSPKE (16*32+ 4) /* OS Protection Keys Enable */ #define X86_FEATURE_AVX512_VPOPCNTDQ (16*32+14) /* POPCNT for vectors of DW/QW */ -#define X86_FEATURE_RDPID (16*32+ 22) /* RDPID instruction */ +#define X86_FEATURE_LA57 (16*32+16) /* 5-level page tables */ +#define X86_FEATURE_RDPID (16*32+22) /* RDPID instruction */ /* AMD-defined CPU features, CPUID level 0x80000007 (ebx), word 17 */ #define X86_FEATURE_OVERFLOW_RECOV (17*32+0) /* MCA overflow recovery support */ diff --git a/arch/x86/include/asm/pgtable_types.h b/arch/x86/include/asm/pgtable_types.h index 8b4de22d6429..62484333673d 100644 --- a/arch/x86/include/asm/pgtable_types.h +++ b/arch/x86/include/asm/pgtable_types.h @@ -273,6 +273,8 @@ static inline pgdval_t pgd_flags(pgd_t pgd) } #if CONFIG_PGTABLE_LEVELS > 3 +#include <asm-generic/5level-fixup.h> + typedef struct { pudval_t pud; } pud_t; static inline pud_t native_make_pud(pmdval_t val) @@ -285,6 +287,7 @@ static inline pudval_t native_pud_val(pud_t pud) return pud.pud; } #else +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopud.h> static inline pudval_t native_pud_val(pud_t pud) @@ -306,6 +309,7 @@ static inline pmdval_t native_pmd_val(pmd_t pmd) return pmd.pmd; } #else +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> static inline pmdval_t native_pmd_val(pmd_t pmd) diff --git a/arch/x86/include/asm/pkeys.h b/arch/x86/include/asm/pkeys.h index 34684adb6899..b3b09b98896d 100644 --- a/arch/x86/include/asm/pkeys.h +++ b/arch/x86/include/asm/pkeys.h @@ -46,6 +46,15 @@ extern int __arch_set_user_pkey_access(struct task_struct *tsk, int pkey, static inline bool mm_pkey_is_allocated(struct mm_struct *mm, int pkey) { + /* + * "Allocated" pkeys are those that have been returned + * from pkey_alloc(). pkey 0 is special, and never + * returned from pkey_alloc(). + */ + if (pkey <= 0) + return false; + if (pkey >= arch_max_pkey()) + return false; return mm_pkey_allocation_map(mm) & (1U << pkey); } @@ -82,12 +91,6 @@ int mm_pkey_alloc(struct mm_struct *mm) static inline int mm_pkey_free(struct mm_struct *mm, int pkey) { - /* - * pkey 0 is special, always allocated and can never - * be freed. - */ - if (!pkey) - return -EINVAL; if (!mm_pkey_is_allocated(mm, pkey)) return -EINVAL; diff --git a/arch/x86/include/asm/purgatory.h b/arch/x86/include/asm/purgatory.h new file mode 100644 index 000000000000..d7da2729903d --- /dev/null +++ b/arch/x86/include/asm/purgatory.h @@ -0,0 +1,20 @@ +#ifndef _ASM_X86_PURGATORY_H +#define _ASM_X86_PURGATORY_H + +#ifndef __ASSEMBLY__ +#include <linux/purgatory.h> + +extern void purgatory(void); +/* + * These forward declarations serve two purposes: + * + * 1) Make sparse happy when checking arch/purgatory + * 2) Document that these are required to be global so the symbol + * lookup in kexec works + */ +extern unsigned long purgatory_backup_dest; +extern unsigned long purgatory_backup_src; +extern unsigned long purgatory_backup_sz; +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_PURGATORY_H */ diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index 6fa85944af83..fc5abff9b7fd 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -188,7 +188,7 @@ static inline void __native_flush_tlb_single(unsigned long addr) static inline void __flush_tlb_all(void) { - if (static_cpu_has(X86_FEATURE_PGE)) + if (boot_cpu_has(X86_FEATURE_PGE)) __flush_tlb_global(); else __flush_tlb(); diff --git a/arch/x86/include/uapi/asm/bootparam.h b/arch/x86/include/uapi/asm/bootparam.h index 5138dacf8bb8..07244ea16765 100644 --- a/arch/x86/include/uapi/asm/bootparam.h +++ b/arch/x86/include/uapi/asm/bootparam.h @@ -58,7 +58,7 @@ struct setup_header { __u32 header; __u16 version; __u32 realmode_swtch; - __u16 start_sys; + __u16 start_sys_seg; __u16 kernel_version; __u8 type_of_loader; __u8 loadflags; diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 4261b3282ad9..aee7deddabd0 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -1610,24 +1610,15 @@ static inline void try_to_enable_x2apic(int remap_mode) { } static inline void __x2apic_enable(void) { } #endif /* !CONFIG_X86_X2APIC */ -static int __init try_to_enable_IR(void) -{ -#ifdef CONFIG_X86_IO_APIC - if (!x2apic_enabled() && skip_ioapic_setup) { - pr_info("Not enabling interrupt remapping due to skipped IO-APIC setup\n"); - return -1; - } -#endif - return irq_remapping_enable(); -} - void __init enable_IR_x2apic(void) { unsigned long flags; int ret, ir_stat; - if (skip_ioapic_setup) + if (skip_ioapic_setup) { + pr_info("Not enabling interrupt remapping due to skipped IO-APIC setup\n"); return; + } ir_stat = irq_remapping_prepare(); if (ir_stat < 0 && !x2apic_supported()) @@ -1645,7 +1636,7 @@ void __init enable_IR_x2apic(void) /* If irq_remapping_prepare() succeeded, try to enable it */ if (ir_stat >= 0) - ir_stat = try_to_enable_IR(); + ir_stat = irq_remapping_enable(); /* ir_stat contains the remap mode or an error code */ try_to_enable_x2apic(ir_stat); @@ -2062,10 +2053,10 @@ static int allocate_logical_cpuid(int apicid) /* Allocate a new cpuid. */ if (nr_logical_cpuids >= nr_cpu_ids) { - WARN_ONCE(1, "Only %d processors supported." + WARN_ONCE(1, "APIC: NR_CPUS/possible_cpus limit of %i reached. " "Processor %d/0x%x and the rest are ignored.\n", - nr_cpu_ids - 1, nr_logical_cpuids, apicid); - return -1; + nr_cpu_ids, nr_logical_cpuids, apicid); + return -EINVAL; } cpuid_to_apicid[nr_logical_cpuids] = apicid; diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c index 35a5d5dca2fa..c36140d788fe 100644 --- a/arch/x86/kernel/cpu/amd.c +++ b/arch/x86/kernel/cpu/amd.c @@ -556,10 +556,6 @@ static void early_init_amd(struct cpuinfo_x86 *c) if (c->x86_power & (1 << 8)) { set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC); - if (check_tsc_unstable()) - clear_sched_clock_stable(); - } else { - clear_sched_clock_stable(); } /* Bit 12 of 8000_0007 edx is accumulated power mechanism. */ diff --git a/arch/x86/kernel/cpu/centaur.c b/arch/x86/kernel/cpu/centaur.c index adc0ebd8bed0..43955ee6715b 100644 --- a/arch/x86/kernel/cpu/centaur.c +++ b/arch/x86/kernel/cpu/centaur.c @@ -105,8 +105,6 @@ static void early_init_centaur(struct cpuinfo_x86 *c) #ifdef CONFIG_X86_64 set_cpu_cap(c, X86_FEATURE_SYSENTER32); #endif - - clear_sched_clock_stable(); } static void init_centaur(struct cpuinfo_x86 *c) diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index b11b38c3b0bd..58094a1f9e9d 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -88,7 +88,6 @@ static void default_init(struct cpuinfo_x86 *c) strcpy(c->x86_model_id, "386"); } #endif - clear_sched_clock_stable(); } static const struct cpu_dev default_cpu = { @@ -1077,8 +1076,6 @@ static void identify_cpu(struct cpuinfo_x86 *c) */ if (this_cpu->c_init) this_cpu->c_init(c); - else - clear_sched_clock_stable(); /* Disable the PN if appropriate */ squash_the_stupid_serial_number(c); diff --git a/arch/x86/kernel/cpu/cyrix.c b/arch/x86/kernel/cpu/cyrix.c index 0a3bc19de017..a70fd61095f8 100644 --- a/arch/x86/kernel/cpu/cyrix.c +++ b/arch/x86/kernel/cpu/cyrix.c @@ -185,7 +185,6 @@ static void early_init_cyrix(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_CYRIX_ARR); break; } - clear_sched_clock_stable(); } static void init_cyrix(struct cpuinfo_x86 *c) diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index fe0a615a051b..063197771b8d 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -162,10 +162,6 @@ static void early_init_intel(struct cpuinfo_x86 *c) if (c->x86_power & (1 << 8)) { set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC); - if (check_tsc_unstable()) - clear_sched_clock_stable(); - } else { - clear_sched_clock_stable(); } /* Penwell and Cloverview have the TSC which doesn't sleep on S3 */ diff --git a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c index 0bbe0f3a039f..c05509d38b1f 100644 --- a/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c +++ b/arch/x86/kernel/cpu/intel_rdt_rdtgroup.c @@ -28,7 +28,6 @@ #include <linux/sched/signal.h> #include <linux/sched/task.h> #include <linux/slab.h> -#include <linux/cpu.h> #include <linux/task_work.h> #include <uapi/linux/magic.h> diff --git a/arch/x86/kernel/cpu/transmeta.c b/arch/x86/kernel/cpu/transmeta.c index 8457b4978668..d77d07ab310b 100644 --- a/arch/x86/kernel/cpu/transmeta.c +++ b/arch/x86/kernel/cpu/transmeta.c @@ -16,8 +16,6 @@ static void early_init_transmeta(struct cpuinfo_x86 *c) if (xlvl >= 0x80860001) c->x86_capability[CPUID_8086_0001_EDX] = cpuid_edx(0x80860001); } - - clear_sched_clock_stable(); } static void init_transmeta(struct cpuinfo_x86 *c) diff --git a/arch/x86/kernel/cpu/vmware.c b/arch/x86/kernel/cpu/vmware.c index 891f4dad7b2c..22403a28caf5 100644 --- a/arch/x86/kernel/cpu/vmware.c +++ b/arch/x86/kernel/cpu/vmware.c @@ -30,7 +30,6 @@ #include <asm/hypervisor.h> #include <asm/timer.h> #include <asm/apic.h> -#include <asm/timer.h> #undef pr_fmt #define pr_fmt(fmt) "vmware: " fmt diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c index 8639bb2ae058..8f3d9cf26ff9 100644 --- a/arch/x86/kernel/ftrace.c +++ b/arch/x86/kernel/ftrace.c @@ -535,7 +535,7 @@ static void run_sync(void) { int enable_irqs = irqs_disabled(); - /* We may be called with interrupts disbled (on bootup). */ + /* We may be called with interrupts disabled (on bootup). */ if (enable_irqs) local_irq_enable(); on_each_cpu(do_sync_core, NULL, 1); diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index dc6ba5bda9fc..89ff7af2de50 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -354,7 +354,7 @@ static int hpet_resume(struct clock_event_device *evt, int timer) irq_domain_deactivate_irq(irq_get_irq_data(hdev->irq)); irq_domain_activate_irq(irq_get_irq_data(hdev->irq)); - disable_irq(hdev->irq); + disable_hardirq(hdev->irq); irq_set_affinity(hdev->irq, cpumask_of(hdev->cpu)); enable_irq(hdev->irq); } diff --git a/arch/x86/kernel/kdebugfs.c b/arch/x86/kernel/kdebugfs.c index bdb83e431d89..38b64587b31b 100644 --- a/arch/x86/kernel/kdebugfs.c +++ b/arch/x86/kernel/kdebugfs.c @@ -167,7 +167,7 @@ static int __init boot_params_kdebugfs_init(void) struct dentry *dbp, *version, *data; int error = -ENOMEM; - dbp = debugfs_create_dir("boot_params", NULL); + dbp = debugfs_create_dir("boot_params", arch_debugfs_dir); if (!dbp) return -ENOMEM; diff --git a/arch/x86/kernel/kprobes/common.h b/arch/x86/kernel/kprobes/common.h index c6ee63f927ab..d688826e5736 100644 --- a/arch/x86/kernel/kprobes/common.h +++ b/arch/x86/kernel/kprobes/common.h @@ -67,7 +67,7 @@ #endif /* Ensure if the instruction can be boostable */ -extern int can_boost(kprobe_opcode_t *instruction); +extern int can_boost(kprobe_opcode_t *instruction, void *addr); /* Recover instruction if given address is probed */ extern unsigned long recover_probed_instruction(kprobe_opcode_t *buf, unsigned long addr); diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c index 6384eb754a58..993fa4fe4f68 100644 --- a/arch/x86/kernel/kprobes/core.c +++ b/arch/x86/kernel/kprobes/core.c @@ -167,12 +167,12 @@ NOKPROBE_SYMBOL(skip_prefixes); * Returns non-zero if opcode is boostable. * RIP relative instructions are adjusted at copying time in 64 bits mode */ -int can_boost(kprobe_opcode_t *opcodes) +int can_boost(kprobe_opcode_t *opcodes, void *addr) { kprobe_opcode_t opcode; kprobe_opcode_t *orig_opcodes = opcodes; - if (search_exception_tables((unsigned long)opcodes)) + if (search_exception_tables((unsigned long)addr)) return 0; /* Page fault may occur on this address. */ retry: @@ -417,7 +417,7 @@ static int arch_copy_kprobe(struct kprobe *p) * __copy_instruction can modify the displacement of the instruction, * but it doesn't affect boostable check. */ - if (can_boost(p->ainsn.insn)) + if (can_boost(p->ainsn.insn, p->addr)) p->ainsn.boostable = 0; else p->ainsn.boostable = -1; diff --git a/arch/x86/kernel/kprobes/opt.c b/arch/x86/kernel/kprobes/opt.c index 3d1bee9d6a72..3e7c6e5a08ff 100644 --- a/arch/x86/kernel/kprobes/opt.c +++ b/arch/x86/kernel/kprobes/opt.c @@ -178,7 +178,7 @@ static int copy_optimized_instructions(u8 *dest, u8 *src) while (len < RELATIVEJUMP_SIZE) { ret = __copy_instruction(dest + len, src + len); - if (!ret || !can_boost(dest + len)) + if (!ret || !can_boost(dest + len, src + len)) return -EINVAL; len += ret; } diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c index 307b1f4543de..857cdbd02867 100644 --- a/arch/x86/kernel/machine_kexec_64.c +++ b/arch/x86/kernel/machine_kexec_64.c @@ -194,19 +194,22 @@ static int arch_update_purgatory(struct kimage *image) /* Setup copying of backup region */ if (image->type == KEXEC_TYPE_CRASH) { - ret = kexec_purgatory_get_set_symbol(image, "backup_dest", + ret = kexec_purgatory_get_set_symbol(image, + "purgatory_backup_dest", &image->arch.backup_load_addr, sizeof(image->arch.backup_load_addr), 0); if (ret) return ret; - ret = kexec_purgatory_get_set_symbol(image, "backup_src", + ret = kexec_purgatory_get_set_symbol(image, + "purgatory_backup_src", &image->arch.backup_src_start, sizeof(image->arch.backup_src_start), 0); if (ret) return ret; - ret = kexec_purgatory_get_set_symbol(image, "backup_sz", + ret = kexec_purgatory_get_set_symbol(image, + "purgatory_backup_sz", &image->arch.backup_src_sz, sizeof(image->arch.backup_src_sz), 0); if (ret) diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index e244c19a2451..067f9813fd2c 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -223,6 +223,22 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = { DMI_MATCH(DMI_BOARD_NAME, "P4S800"), }, }, + { /* Handle problems with rebooting on ASUS EeeBook X205TA */ + .callback = set_acpi_reboot, + .ident = "ASUS EeeBook X205TA", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X205TA"), + }, + }, + { /* Handle problems with rebooting on ASUS EeeBook X205TAW */ + .callback = set_acpi_reboot, + .ident = "ASUS EeeBook X205TAW", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X205TAW"), + }, + }, /* Certec */ { /* Handle problems with rebooting on Certec BPC600 */ diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c index 46bcda4cb1c2..4f7a9833d8e5 100644 --- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -327,9 +327,16 @@ unsigned long long sched_clock(void) { return paravirt_sched_clock(); } + +static inline bool using_native_sched_clock(void) +{ + return pv_time_ops.sched_clock == native_sched_clock; +} #else unsigned long long sched_clock(void) __attribute__((alias("native_sched_clock"))); + +static inline bool using_native_sched_clock(void) { return true; } #endif int check_tsc_unstable(void) @@ -1112,8 +1119,10 @@ static void tsc_cs_mark_unstable(struct clocksource *cs) { if (tsc_unstable) return; + tsc_unstable = 1; - clear_sched_clock_stable(); + if (using_native_sched_clock()) + clear_sched_clock_stable(); disable_sched_clock_irqtime(); pr_info("Marking TSC unstable due to clocksource watchdog\n"); } @@ -1135,18 +1144,20 @@ static struct clocksource clocksource_tsc = { void mark_tsc_unstable(char *reason) { - if (!tsc_unstable) { - tsc_unstable = 1; + if (tsc_unstable) + return; + + tsc_unstable = 1; + if (using_native_sched_clock()) clear_sched_clock_stable(); - disable_sched_clock_irqtime(); - pr_info("Marking TSC unstable due to %s\n", reason); - /* Change only the rating, when not registered */ - if (clocksource_tsc.mult) - clocksource_mark_unstable(&clocksource_tsc); - else { - clocksource_tsc.flags |= CLOCK_SOURCE_UNSTABLE; - clocksource_tsc.rating = 0; - } + disable_sched_clock_irqtime(); + pr_info("Marking TSC unstable due to %s\n", reason); + /* Change only the rating, when not registered */ + if (clocksource_tsc.mult) { + clocksource_mark_unstable(&clocksource_tsc); + } else { + clocksource_tsc.flags |= CLOCK_SOURCE_UNSTABLE; + clocksource_tsc.rating = 0; } } diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 283aa8601833..98e82ee1e699 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -7258,9 +7258,8 @@ static int handle_vmoff(struct kvm_vcpu *vcpu) static int handle_vmclear(struct kvm_vcpu *vcpu) { struct vcpu_vmx *vmx = to_vmx(vcpu); + u32 zero = 0; gpa_t vmptr; - struct vmcs12 *vmcs12; - struct page *page; if (!nested_vmx_check_permission(vcpu)) return 1; @@ -7271,22 +7270,9 @@ static int handle_vmclear(struct kvm_vcpu *vcpu) if (vmptr == vmx->nested.current_vmptr) nested_release_vmcs12(vmx); - page = nested_get_page(vcpu, vmptr); - if (page == NULL) { - /* - * For accurate processor emulation, VMCLEAR beyond available - * physical memory should do nothing at all. However, it is - * possible that a nested vmx bug, not a guest hypervisor bug, - * resulted in this case, so let's shut down before doing any - * more damage: - */ - kvm_make_request(KVM_REQ_TRIPLE_FAULT, vcpu); - return 1; - } - vmcs12 = kmap(page); - vmcs12->launch_state = 0; - kunmap(page); - nested_release_page(page); + kvm_vcpu_write_guest(vcpu, + vmptr + offsetof(struct vmcs12, launch_state), + &zero, sizeof(zero)); nested_free_vmcs02(vmx, vmptr); @@ -9694,10 +9680,8 @@ static inline bool nested_vmx_merge_msr_bitmap(struct kvm_vcpu *vcpu, return false; page = nested_get_page(vcpu, vmcs12->msr_bitmap); - if (!page) { - WARN_ON(1); + if (!page) return false; - } msr_bitmap_l1 = (unsigned long *)kmap(page); memset(msr_bitmap_l0, 0xff, PAGE_SIZE); @@ -11121,8 +11105,10 @@ static void nested_vmx_vmexit(struct kvm_vcpu *vcpu, u32 exit_reason, */ static void vmx_leave_nested(struct kvm_vcpu *vcpu) { - if (is_guest_mode(vcpu)) + if (is_guest_mode(vcpu)) { + to_vmx(vcpu)->nested.nested_run_pending = 0; nested_vmx_vmexit(vcpu, -1, 0, 0); + } free_nested(to_vmx(vcpu)); } diff --git a/arch/x86/mm/gup.c b/arch/x86/mm/gup.c index 99c7805a9693..1f3b6ef105cd 100644 --- a/arch/x86/mm/gup.c +++ b/arch/x86/mm/gup.c @@ -106,32 +106,35 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr, unsigned long end, int write, struct page **pages, int *nr) { struct dev_pagemap *pgmap = NULL; - int nr_start = *nr; - pte_t *ptep; + int nr_start = *nr, ret = 0; + pte_t *ptep, *ptem; - ptep = pte_offset_map(&pmd, addr); + /* + * Keep the original mapped PTE value (ptem) around since we + * might increment ptep off the end of the page when finishing + * our loop iteration. + */ + ptem = ptep = pte_offset_map(&pmd, addr); do { pte_t pte = gup_get_pte(ptep); struct page *page; /* Similar to the PMD case, NUMA hinting must take slow path */ - if (pte_protnone(pte)) { - pte_unmap(ptep); - return 0; - } + if (pte_protnone(pte)) + break; + + if (!pte_allows_gup(pte_val(pte), write)) + break; if (pte_devmap(pte)) { pgmap = get_dev_pagemap(pte_pfn(pte), pgmap); if (unlikely(!pgmap)) { undo_dev_pagemap(nr, nr_start, pages); - pte_unmap(ptep); - return 0; + break; } - } else if (!pte_allows_gup(pte_val(pte), write) || - pte_special(pte)) { - pte_unmap(ptep); - return 0; - } + } else if (pte_special(pte)) + break; + VM_BUG_ON(!pfn_valid(pte_pfn(pte))); page = pte_page(pte); get_page(page); @@ -141,9 +144,11 @@ static noinline int gup_pte_range(pmd_t pmd, unsigned long addr, (*nr)++; } while (ptep++, addr += PAGE_SIZE, addr != end); - pte_unmap(ptep - 1); + if (addr == end) + ret = 1; + pte_unmap(ptem); - return 1; + return ret; } static inline void get_head_page_multiple(struct page *page, int nr) diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 0cb52ae0a8f0..190e718694b1 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -735,6 +735,15 @@ void pcibios_disable_device (struct pci_dev *dev) pcibios_disable_irq(dev); } +#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC +void pcibios_release_device(struct pci_dev *dev) +{ + if (atomic_dec_return(&dev->enable_cnt) >= 0) + pcibios_disable_device(dev); + +} +#endif + int pci_ext_cfg_avail(void) { if (raw_pci_ext_ops) diff --git a/arch/x86/pci/xen.c b/arch/x86/pci/xen.c index e1fb269c87af..292ab0364a89 100644 --- a/arch/x86/pci/xen.c +++ b/arch/x86/pci/xen.c @@ -234,23 +234,14 @@ static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) return 1; for_each_pci_msi_entry(msidesc, dev) { - __pci_read_msi_msg(msidesc, &msg); - pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) | - ((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff); - if (msg.data != XEN_PIRQ_MSI_DATA || - xen_irq_from_pirq(pirq) < 0) { - pirq = xen_allocate_pirq_msi(dev, msidesc); - if (pirq < 0) { - irq = -ENODEV; - goto error; - } - xen_msi_compose_msg(dev, pirq, &msg); - __pci_write_msi_msg(msidesc, &msg); - dev_dbg(&dev->dev, "xen: msi bound to pirq=%d\n", pirq); - } else { - dev_dbg(&dev->dev, - "xen: msi already bound to pirq=%d\n", pirq); + pirq = xen_allocate_pirq_msi(dev, msidesc); + if (pirq < 0) { + irq = -ENODEV; + goto error; } + xen_msi_compose_msg(dev, pirq, &msg); + __pci_write_msi_msg(msidesc, &msg); + dev_dbg(&dev->dev, "xen: msi bound to pirq=%d\n", pirq); irq = xen_bind_pirq_msi_to_irq(dev, msidesc, pirq, (type == PCI_CAP_ID_MSI) ? nvec : 1, (type == PCI_CAP_ID_MSIX) ? diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index 766d4d3529a1..f25982cdff90 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -1847,7 +1847,6 @@ static void pq_init(int node, int pnode) ops.write_payload_first(pnode, first); ops.write_payload_last(pnode, last); - ops.write_g_sw_ack(pnode, 0xffffUL); /* in effect, all msg_type's are set to MSG_NOOP */ memset(pqp, 0, sizeof(struct bau_pq_entry) * DEST_Q_SIZE); diff --git a/arch/x86/purgatory/purgatory.c b/arch/x86/purgatory/purgatory.c index 25e068ba3382..470edad96bb9 100644 --- a/arch/x86/purgatory/purgatory.c +++ b/arch/x86/purgatory/purgatory.c @@ -10,21 +10,19 @@ * Version 2. See the file COPYING for more details. */ +#include <linux/bug.h> +#include <asm/purgatory.h> + #include "sha256.h" #include "../boot/string.h" -struct sha_region { - unsigned long start; - unsigned long len; -}; - -unsigned long backup_dest = 0; -unsigned long backup_src = 0; -unsigned long backup_sz = 0; +unsigned long purgatory_backup_dest __section(.kexec-purgatory); +unsigned long purgatory_backup_src __section(.kexec-purgatory); +unsigned long purgatory_backup_sz __section(.kexec-purgatory); -u8 sha256_digest[SHA256_DIGEST_SIZE] = { 0 }; +u8 purgatory_sha256_digest[SHA256_DIGEST_SIZE] __section(.kexec-purgatory); -struct sha_region sha_regions[16] = {}; +struct kexec_sha_region purgatory_sha_regions[KEXEC_SEGMENT_MAX] __section(.kexec-purgatory); /* * On x86, second kernel requries first 640K of memory to boot. Copy @@ -33,26 +31,28 @@ struct sha_region sha_regions[16] = {}; */ static int copy_backup_region(void) { - if (backup_dest) - memcpy((void *)backup_dest, (void *)backup_src, backup_sz); - + if (purgatory_backup_dest) { + memcpy((void *)purgatory_backup_dest, + (void *)purgatory_backup_src, purgatory_backup_sz); + } return 0; } -int verify_sha256_digest(void) +static int verify_sha256_digest(void) { - struct sha_region *ptr, *end; + struct kexec_sha_region *ptr, *end; u8 digest[SHA256_DIGEST_SIZE]; struct sha256_state sctx; sha256_init(&sctx); - end = &sha_regions[sizeof(sha_regions)/sizeof(sha_regions[0])]; - for (ptr = sha_regions; ptr < end; ptr++) + end = purgatory_sha_regions + ARRAY_SIZE(purgatory_sha_regions); + + for (ptr = purgatory_sha_regions; ptr < end; ptr++) sha256_update(&sctx, (uint8_t *)(ptr->start), ptr->len); sha256_final(&sctx, digest); - if (memcmp(digest, sha256_digest, sizeof(digest))) + if (memcmp(digest, purgatory_sha256_digest, sizeof(digest))) return 1; return 0; diff --git a/arch/x86/purgatory/setup-x86_64.S b/arch/x86/purgatory/setup-x86_64.S index fe3c91ba1bd0..dfae9b9e60b5 100644 --- a/arch/x86/purgatory/setup-x86_64.S +++ b/arch/x86/purgatory/setup-x86_64.S @@ -9,6 +9,7 @@ * This source code is licensed under the GNU General Public License, * Version 2. See the file COPYING for more details. */ +#include <asm/purgatory.h> .text .globl purgatory_start diff --git a/arch/x86/purgatory/sha256.h b/arch/x86/purgatory/sha256.h index bd15a4127735..2867d9825a57 100644 --- a/arch/x86/purgatory/sha256.h +++ b/arch/x86/purgatory/sha256.h @@ -10,7 +10,6 @@ #ifndef SHA256_H #define SHA256_H - #include <linux/types.h> #include <crypto/sha.h> diff --git a/arch/xtensa/include/asm/pgtable.h b/arch/xtensa/include/asm/pgtable.h index 8aa0e0d9cbb2..30dd5b2e4ad5 100644 --- a/arch/xtensa/include/asm/pgtable.h +++ b/arch/xtensa/include/asm/pgtable.h @@ -11,6 +11,7 @@ #ifndef _XTENSA_PGTABLE_H #define _XTENSA_PGTABLE_H +#define __ARCH_USE_5LEVEL_HACK #include <asm-generic/pgtable-nopmd.h> #include <asm/page.h> #include <asm/kmem_layout.h> |