diff options
Diffstat (limited to 'drivers/gpu/drm/i915')
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_ddi.c | 6 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_display_types.h | 10 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_dp.c | 440 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_dp.h | 7 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_hdmi.c | 233 | ||||
| -rw-r--r-- | drivers/gpu/drm/i915/display/intel_hdmi.h | 7 |
6 files changed, 684 insertions, 19 deletions
diff --git a/drivers/gpu/drm/i915/display/intel_ddi.c b/drivers/gpu/drm/i915/display/intel_ddi.c index 92940a0c5ef8..5e927c8ab95a 100644 --- a/drivers/gpu/drm/i915/display/intel_ddi.c +++ b/drivers/gpu/drm/i915/display/intel_ddi.c @@ -3643,6 +3643,7 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, if (!is_mst) intel_dp_set_power(intel_dp, DP_SET_POWER_D0); + intel_dp_configure_protocol_converter(intel_dp, crtc_state); intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true); /* * DDI FEC: "anticipates enabling FEC encoding sets the FEC_READY bit @@ -3651,6 +3652,9 @@ static void tgl_ddi_pre_enable_dp(struct intel_atomic_state *state, */ intel_dp_sink_set_fec_ready(intel_dp, crtc_state); + intel_dp_check_frl_training(intel_dp); + intel_dp_pcon_dsc_configure(intel_dp, crtc_state); + /* * 7.i Follow DisplayPort specification training sequence (see notes for * failure handling) @@ -3725,7 +3729,7 @@ static void hsw_ddi_pre_enable_dp(struct intel_atomic_state *state, intel_ddi_init_dp_buf_reg(encoder, crtc_state); if (!is_mst) intel_dp_set_power(intel_dp, DP_SET_POWER_D0); - intel_dp_configure_protocol_converter(intel_dp); + intel_dp_configure_protocol_converter(intel_dp, crtc_state); intel_dp_sink_set_decompression_state(intel_dp, crtc_state, true); intel_dp_sink_set_fec_ready(intel_dp, crtc_state); diff --git a/drivers/gpu/drm/i915/display/intel_display_types.h b/drivers/gpu/drm/i915/display/intel_display_types.h index ce82d654d0f2..a780ced06f12 100644 --- a/drivers/gpu/drm/i915/display/intel_display_types.h +++ b/drivers/gpu/drm/i915/display/intel_display_types.h @@ -1321,6 +1321,11 @@ struct intel_dp_compliance { u8 test_lane_count; }; +struct intel_dp_pcon_frl { + bool is_trained; + int trained_rate_gbps; +}; + struct intel_dp { i915_reg_t output_reg; u32 DP; @@ -1339,6 +1344,7 @@ struct intel_dp { u8 lttpr_common_caps[DP_LTTPR_COMMON_CAP_SIZE]; u8 lttpr_phy_caps[DP_MAX_LTTPR_COUNT][DP_LTTPR_PHY_CAP_SIZE]; u8 fec_capable; + u8 pcon_dsc_dpcd[DP_PCON_DSC_ENCODER_CAP_SIZE]; /* source rates */ int num_source_rates; const int *source_rates; @@ -1432,8 +1438,10 @@ struct intel_dp { struct { int min_tmds_clock, max_tmds_clock; int max_dotclock; + int pcon_max_frl_bw; u8 max_bpc; bool ycbcr_444_to_420; + bool rgb_to_ycbcr; } dfp; /* Display stream compression testing */ @@ -1441,6 +1449,8 @@ struct intel_dp { bool hobl_failed; bool hobl_active; + + struct intel_dp_pcon_frl frl; }; enum lspcon_vendor { diff --git a/drivers/gpu/drm/i915/display/intel_dp.c b/drivers/gpu/drm/i915/display/intel_dp.c index 2165398d2c7c..58e3856a3ce9 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.c +++ b/drivers/gpu/drm/i915/display/intel_dp.c @@ -651,6 +651,10 @@ intel_dp_output_format(struct drm_connector *connector, !drm_mode_is_420_only(info, mode)) return INTEL_OUTPUT_FORMAT_RGB; + if (intel_dp->dfp.rgb_to_ycbcr && + intel_dp->dfp.ycbcr_444_to_420) + return INTEL_OUTPUT_FORMAT_RGB; + if (intel_dp->dfp.ycbcr_444_to_420) return INTEL_OUTPUT_FORMAT_YCBCR444; else @@ -716,6 +720,25 @@ intel_dp_mode_valid_downstream(struct intel_connector *connector, const struct drm_display_info *info = &connector->base.display_info; int tmds_clock; + /* If PCON supports FRL MODE, check FRL bandwidth constraints */ + if (intel_dp->dfp.pcon_max_frl_bw) { + int target_bw; + int max_frl_bw; + int bpp = intel_dp_mode_min_output_bpp(&connector->base, mode); + + target_bw = bpp * target_clock; + + max_frl_bw = intel_dp->dfp.pcon_max_frl_bw; + + /* converting bw from Gbps to Kbps*/ + max_frl_bw = max_frl_bw * 1000000; + + if (target_bw > max_frl_bw) + return MODE_CLOCK_HIGH; + + return MODE_OK; + } + if (intel_dp->dfp.max_dotclock && target_clock > intel_dp->dfp.max_dotclock) return MODE_CLOCK_HIGH; @@ -3860,6 +3883,8 @@ static void intel_disable_dp(struct intel_atomic_state *state, intel_edp_backlight_off(old_conn_state); intel_dp_set_power(intel_dp, DP_SET_POWER_D3); intel_edp_panel_off(intel_dp); + intel_dp->frl.is_trained = false; + intel_dp->frl.trained_rate_gbps = 0; } static void g4x_disable_dp(struct intel_atomic_state *state, @@ -3955,6 +3980,280 @@ cpt_set_link_train(struct intel_dp *intel_dp, intel_de_posting_read(dev_priv, intel_dp->output_reg); } +static void intel_dp_get_pcon_dsc_cap(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + + /* Clear the cached register set to avoid using stale values */ + + memset(intel_dp->pcon_dsc_dpcd, 0, sizeof(intel_dp->pcon_dsc_dpcd)); + + if (drm_dp_dpcd_read(&intel_dp->aux, DP_PCON_DSC_ENCODER, + intel_dp->pcon_dsc_dpcd, + sizeof(intel_dp->pcon_dsc_dpcd)) < 0) + drm_err(&i915->drm, "Failed to read DPCD register 0x%x\n", + DP_PCON_DSC_ENCODER); + + drm_dbg_kms(&i915->drm, "PCON ENCODER DSC DPCD: %*ph\n", + (int)sizeof(intel_dp->pcon_dsc_dpcd), intel_dp->pcon_dsc_dpcd); +} + +static int intel_dp_pcon_get_frl_mask(u8 frl_bw_mask) +{ + int bw_gbps[] = {9, 18, 24, 32, 40, 48}; + int i; + + for (i = ARRAY_SIZE(bw_gbps) - 1; i >= 0; i--) { + if (frl_bw_mask & (1 << i)) + return bw_gbps[i]; + } + return 0; +} + +static int intel_dp_pcon_set_frl_mask(int max_frl) +{ + switch (max_frl) { + case 48: + return DP_PCON_FRL_BW_MASK_48GBPS; + case 40: + return DP_PCON_FRL_BW_MASK_40GBPS; + case 32: + return DP_PCON_FRL_BW_MASK_32GBPS; + case 24: + return DP_PCON_FRL_BW_MASK_24GBPS; + case 18: + return DP_PCON_FRL_BW_MASK_18GBPS; + case 9: + return DP_PCON_FRL_BW_MASK_9GBPS; + } + + return 0; +} + +static int intel_dp_hdmi_sink_max_frl(struct intel_dp *intel_dp) +{ + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_connector *connector = &intel_connector->base; + int max_frl_rate; + int max_lanes, rate_per_lane; + int max_dsc_lanes, dsc_rate_per_lane; + + max_lanes = connector->display_info.hdmi.max_lanes; + rate_per_lane = connector->display_info.hdmi.max_frl_rate_per_lane; + max_frl_rate = max_lanes * rate_per_lane; + + if (connector->display_info.hdmi.dsc_cap.v_1p2) { + max_dsc_lanes = connector->display_info.hdmi.dsc_cap.max_lanes; + dsc_rate_per_lane = connector->display_info.hdmi.dsc_cap.max_frl_rate_per_lane; + if (max_dsc_lanes && dsc_rate_per_lane) + max_frl_rate = min(max_frl_rate, max_dsc_lanes * dsc_rate_per_lane); + } + + return max_frl_rate; +} + +static int intel_dp_pcon_start_frl_training(struct intel_dp *intel_dp) +{ +#define PCON_EXTENDED_TRAIN_MODE (1 > 0) +#define PCON_CONCURRENT_MODE (1 > 0) +#define PCON_SEQUENTIAL_MODE !PCON_CONCURRENT_MODE +#define PCON_NORMAL_TRAIN_MODE !PCON_EXTENDED_TRAIN_MODE +#define TIMEOUT_FRL_READY_MS 500 +#define TIMEOUT_HDMI_LINK_ACTIVE_MS 1000 + + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + int max_frl_bw, max_pcon_frl_bw, max_edid_frl_bw, ret; + u8 max_frl_bw_mask = 0, frl_trained_mask; + bool is_active; + + ret = drm_dp_pcon_reset_frl_config(&intel_dp->aux); + if (ret < 0) + return ret; + + max_pcon_frl_bw = intel_dp->dfp.pcon_max_frl_bw; + drm_dbg(&i915->drm, "PCON max rate = %d Gbps\n", max_pcon_frl_bw); + + max_edid_frl_bw = intel_dp_hdmi_sink_max_frl(intel_dp); + drm_dbg(&i915->drm, "Sink max rate from EDID = %d Gbps\n", max_edid_frl_bw); + + max_frl_bw = min(max_edid_frl_bw, max_pcon_frl_bw); + + if (max_frl_bw <= 0) + return -EINVAL; + + ret = drm_dp_pcon_frl_prepare(&intel_dp->aux, false); + if (ret < 0) + return ret; + /* Wait for PCON to be FRL Ready */ + wait_for(is_active = drm_dp_pcon_is_frl_ready(&intel_dp->aux) == true, TIMEOUT_FRL_READY_MS); + + if (!is_active) + return -ETIMEDOUT; + + max_frl_bw_mask = intel_dp_pcon_set_frl_mask(max_frl_bw); + ret = drm_dp_pcon_frl_configure_1(&intel_dp->aux, max_frl_bw, PCON_SEQUENTIAL_MODE); + if (ret < 0) + return ret; + ret = drm_dp_pcon_frl_configure_2(&intel_dp->aux, max_frl_bw_mask, PCON_NORMAL_TRAIN_MODE); + if (ret < 0) + return ret; + ret = drm_dp_pcon_frl_enable(&intel_dp->aux); + if (ret < 0) + return ret; + /* + * Wait for FRL to be completed + * Check if the HDMI Link is up and active. + */ + wait_for(is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux) == true, TIMEOUT_HDMI_LINK_ACTIVE_MS); + + if (!is_active) + return -ETIMEDOUT; + + /* Verify HDMI Link configuration shows FRL Mode */ + if (drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, &frl_trained_mask) != + DP_PCON_HDMI_MODE_FRL) { + drm_dbg(&i915->drm, "HDMI couldn't be trained in FRL Mode\n"); + return -EINVAL; + } + drm_dbg(&i915->drm, "MAX_FRL_MASK = %u, FRL_TRAINED_MASK = %u\n", max_frl_bw_mask, frl_trained_mask); + + intel_dp->frl.trained_rate_gbps = intel_dp_pcon_get_frl_mask(frl_trained_mask); + intel_dp->frl.is_trained = true; + drm_dbg(&i915->drm, "FRL trained with : %d Gbps\n", intel_dp->frl.trained_rate_gbps); + + return 0; +} + +static bool intel_dp_is_hdmi_2_1_sink(struct intel_dp *intel_dp) +{ + if (drm_dp_is_branch(intel_dp->dpcd) && + intel_dp->has_hdmi_sink && + intel_dp_hdmi_sink_max_frl(intel_dp) > 0) + return true; + + return false; +} + +void intel_dp_check_frl_training(struct intel_dp *intel_dp) +{ + struct drm_i915_private *dev_priv = dp_to_i915(intel_dp); + + /* Always go for FRL training if supported */ + if (!intel_dp_is_hdmi_2_1_sink(intel_dp) || + intel_dp->frl.is_trained) + return; + + if (intel_dp_pcon_start_frl_training(intel_dp) < 0) { + int ret, mode; + + drm_dbg(&dev_priv->drm, "Couldnt set FRL mode, continuing with TMDS mode\n"); + ret = drm_dp_pcon_reset_frl_config(&intel_dp->aux); + mode = drm_dp_pcon_hdmi_link_mode(&intel_dp->aux, NULL); + + if (ret < 0 || mode != DP_PCON_HDMI_MODE_TMDS) + drm_dbg(&dev_priv->drm, "Issue with PCON, cannot set TMDS mode\n"); + } else { + drm_dbg(&dev_priv->drm, "FRL training Completed\n"); + } +} + +static int +intel_dp_pcon_dsc_enc_slice_height(const struct intel_crtc_state *crtc_state) +{ + int vactive = crtc_state->hw.adjusted_mode.vdisplay; + + return intel_hdmi_dsc_get_slice_height(vactive); +} + +static int +intel_dp_pcon_dsc_enc_slices(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_connector *connector = &intel_connector->base; + int hdmi_throughput = connector->display_info.hdmi.dsc_cap.clk_per_slice; + int hdmi_max_slices = connector->display_info.hdmi.dsc_cap.max_slices; + int pcon_max_slices = drm_dp_pcon_dsc_max_slices(intel_dp->pcon_dsc_dpcd); + int pcon_max_slice_width = drm_dp_pcon_dsc_max_slice_width(intel_dp->pcon_dsc_dpcd); + + return intel_hdmi_dsc_get_num_slices(crtc_state, pcon_max_slices, + pcon_max_slice_width, + hdmi_max_slices, hdmi_throughput); +} + +static int +intel_dp_pcon_dsc_enc_bpp(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state, + int num_slices, int slice_width) +{ + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_connector *connector = &intel_connector->base; + int output_format = crtc_state->output_format; + bool hdmi_all_bpp = connector->display_info.hdmi.dsc_cap.all_bpp; + int pcon_fractional_bpp = drm_dp_pcon_dsc_bpp_incr(intel_dp->pcon_dsc_dpcd); + int hdmi_max_chunk_bytes = + connector->display_info.hdmi.dsc_cap.total_chunk_kbytes * 1024; + + return intel_hdmi_dsc_get_bpp(pcon_fractional_bpp, slice_width, + num_slices, output_format, hdmi_all_bpp, + hdmi_max_chunk_bytes); +} + +void +intel_dp_pcon_dsc_configure(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) +{ + u8 pps_param[6]; + int slice_height; + int slice_width; + int num_slices; + int bits_per_pixel; + int ret; + struct intel_connector *intel_connector = intel_dp->attached_connector; + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + struct drm_connector *connector; + bool hdmi_is_dsc_1_2; + + if (!intel_dp_is_hdmi_2_1_sink(intel_dp)) + return; + + if (!intel_connector) + return; + connector = &intel_connector->base; + hdmi_is_dsc_1_2 = connector->display_info.hdmi.dsc_cap.v_1p2; + + if (!drm_dp_pcon_enc_is_dsc_1_2(intel_dp->pcon_dsc_dpcd) || + !hdmi_is_dsc_1_2) + return; + + slice_height = intel_dp_pcon_dsc_enc_slice_height(crtc_state); + if (!slice_height) + return; + + num_slices = intel_dp_pcon_dsc_enc_slices(intel_dp, crtc_state); + if (!num_slices) + return; + + slice_width = DIV_ROUND_UP(crtc_state->hw.adjusted_mode.hdisplay, + num_slices); + + bits_per_pixel = intel_dp_pcon_dsc_enc_bpp(intel_dp, crtc_state, + num_slices, slice_width); + if (!bits_per_pixel) + return; + + pps_param[0] = slice_height & 0xFF; + pps_param[1] = slice_height >> 8; + pps_param[2] = slice_width & 0xFF; + pps_param[3] = slice_width >> 8; + pps_param[4] = bits_per_pixel & 0xFF; + pps_param[5] = (bits_per_pixel >> 8) & 0x3; + + ret = drm_dp_pcon_pps_override_param(&intel_dp->aux, pps_param); + if (ret < 0) + drm_dbg_kms(&i915->drm, "Failed to set pcon DSC\n"); +} + static void g4x_set_link_train(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state, @@ -4010,7 +4309,8 @@ static void intel_dp_enable_port(struct intel_dp *intel_dp, intel_de_posting_read(dev_priv, intel_dp->output_reg); } -void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp) +void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state) { struct drm_i915_private *i915 = dp_to_i915(intel_dp); u8 tmp; @@ -4039,12 +4339,42 @@ void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp) enableddisabled(intel_dp->dfp.ycbcr_444_to_420)); tmp = 0; + if (intel_dp->dfp.rgb_to_ycbcr) { + bool bt2020, bt709; - if (drm_dp_dpcd_writeb(&intel_dp->aux, - DP_PROTOCOL_CONVERTER_CONTROL_2, tmp) <= 0) + /* + * FIXME: Currently if userspace selects BT2020 or BT709, but PCON supports only + * RGB->YCbCr for BT601 colorspace, we go ahead with BT601, as default. + * + */ + tmp = DP_CONVERSION_BT601_RGB_YCBCR_ENABLE; + + bt2020 = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp->dpcd, + intel_dp->downstream_ports, + DP_DS_HDMI_BT2020_RGB_YCBCR_CONV); + bt709 = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp->dpcd, + intel_dp->downstream_ports, + DP_DS_HDMI_BT709_RGB_YCBCR_CONV); + switch (crtc_state->infoframes.vsc.colorimetry) { + case DP_COLORIMETRY_BT2020_RGB: + case DP_COLORIMETRY_BT2020_YCC: + if (bt2020) + tmp = DP_CONVERSION_BT2020_RGB_YCBCR_ENABLE; + break; + case DP_COLORIMETRY_BT709_YCC: + case DP_COLORIMETRY_XVYCC_709: + if (bt709) + tmp = DP_CONVERSION_BT709_RGB_YCBCR_ENABLE; + break; + default: + break; + } + } + + if (drm_dp_pcon_convert_rgb_to_ycbcr(&intel_dp->aux, tmp) < 0) drm_dbg_kms(&i915->drm, - "Failed to set protocol converter YCbCr 4:2:2 conversion mode to %s\n", - enableddisabled(false)); + "Failed to set protocol converter RGB->YCbCr conversion mode to %s\n", + enableddisabled(tmp ? true : false)); } static void intel_enable_dp(struct intel_atomic_state *state, @@ -4084,7 +4414,9 @@ static void intel_enable_dp(struct intel_atomic_state *state, } intel_dp_set_power(intel_dp, DP_SET_POWER_D0); - intel_dp_configure_protocol_converter(intel_dp); + intel_dp_configure_protocol_converter(intel_dp, pipe_config); + intel_dp_check_frl_training(intel_dp); + intel_dp_pcon_dsc_configure(intel_dp, pipe_config); intel_dp_start_link_train(intel_dp, pipe_config); intel_dp_stop_link_train(intel_dp, pipe_config); @@ -5833,6 +6165,28 @@ intel_dp_check_mst_status(struct intel_dp *intel_dp) return link_ok; } +static void +intel_dp_handle_hdmi_link_status_change(struct intel_dp *intel_dp) +{ + bool is_active; + u8 buf = 0; + + is_active = drm_dp_pcon_hdmi_link_active(&intel_dp->aux); + if (intel_dp->frl.is_trained && !is_active) { + if (drm_dp_dpcd_readb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, &buf) < 0) + return; + + buf &= ~DP_PCON_ENABLE_HDMI_LINK; + if (drm_dp_dpcd_writeb(&intel_dp->aux, DP_PCON_HDMI_LINK_CONFIG_1, buf) < 0) + return; + + drm_dp_pcon_hdmi_frl_link_error_count(&intel_dp->aux, &intel_dp->attached_connector->base); + + /* Restart FRL training or fall back to TMDS mode */ + intel_dp_check_frl_training(intel_dp); + } +} + static bool intel_dp_needs_link_retrain(struct intel_dp *intel_dp) { @@ -6006,6 +6360,8 @@ int intel_dp_retrain_link(struct intel_encoder *encoder, !intel_dp_mst_is_master_trans(crtc_state)) continue; + intel_dp_check_frl_training(intel_dp); + intel_dp_pcon_dsc_configure(intel_dp, crtc_state); intel_dp_start_link_train(intel_dp, crtc_state); intel_dp_stop_link_train(intel_dp, crtc_state); break; @@ -6197,7 +6553,7 @@ intel_dp_hotplug(struct intel_encoder *encoder, return state; } -static void intel_dp_check_service_irq(struct intel_dp *intel_dp) +static void intel_dp_check_device_service_irq(struct intel_dp *intel_dp) { struct drm_i915_private *i915 = dp_to_i915(intel_dp); u8 val; @@ -6221,6 +6577,30 @@ static void intel_dp_check_service_irq(struct intel_dp *intel_dp) drm_dbg_kms(&i915->drm, "Sink specific irq unhandled\n"); } +static void intel_dp_check_link_service_irq(struct intel_dp *intel_dp) +{ + struct drm_i915_private *i915 = dp_to_i915(intel_dp); + u8 val; + + if (intel_dp->dpcd[DP_DPCD_REV] < 0x11) + return; + + if (drm_dp_dpcd_readb(&intel_dp->aux, + DP_LINK_SERVICE_IRQ_VECTOR_ESI0, &val) != 1 || !val) { + drm_dbg_kms(&i915->drm, "Error in reading link service irq vector\n"); + return; + } + + if (drm_dp_dpcd_writeb(&intel_dp->aux, + DP_LINK_SERVICE_IRQ_VECTOR_ESI0, val) != 1) { + drm_dbg_kms(&i915->drm, "Error in writing link service irq vector\n"); + return; + } + + if (val & HDMI_LINK_STATUS_CHANGED) + intel_dp_handle_hdmi_link_status_change(intel_dp); +} + /* * According to DP spec * 5.1.2: @@ -6260,7 +6640,8 @@ intel_dp_short_pulse(struct intel_dp *intel_dp) return false; } - intel_dp_check_service_irq(intel_dp); + intel_dp_check_device_service_irq(intel_dp); + intel_dp_check_link_service_irq(intel_dp); /* Handle CEC interrupts, if any */ drm_dp_cec_irq(&intel_dp->aux); @@ -6480,13 +6861,20 @@ intel_dp_update_dfp(struct intel_dp *intel_dp, intel_dp->downstream_ports, edid); + intel_dp->dfp.pcon_max_frl_bw = + drm_dp_get_pcon_max_frl_bw(intel_dp->dpcd, + intel_dp->downstream_ports); + drm_dbg_kms(&i915->drm, - "[CONNECTOR:%d:%s] DFP max bpc %d, max dotclock %d, TMDS clock %d-%d\n", + "[CONNECTOR:%d:%s] DFP max bpc %d, max dotclock %d, TMDS clock %d-%d, PCON Max FRL BW %dGbps\n", connector->base.base.id, connector->base.name, intel_dp->dfp.max_bpc, intel_dp->dfp.max_dotclock, intel_dp->dfp.min_tmds_clock, - intel_dp->dfp.max_tmds_clock); + intel_dp->dfp.max_tmds_clock, + intel_dp->dfp.pcon_max_frl_bw); + + intel_dp_get_pcon_dsc_cap(intel_dp); } static void @@ -6494,7 +6882,7 @@ intel_dp_update_420(struct intel_dp *intel_dp) { struct drm_i915_private *i915 = dp_to_i915(intel_dp); struct intel_connector *connector = intel_dp->attached_connector; - bool is_branch, ycbcr_420_passthrough, ycbcr_444_to_420; + bool is_branch, ycbcr_420_passthrough, ycbcr_444_to_420, rgb_to_ycbcr; /* No YCbCr output support on gmch platforms */ if (HAS_GMCH(i915)) @@ -6516,14 +6904,26 @@ intel_dp_update_420(struct intel_dp *intel_dp) dp_to_dig_port(intel_dp)->lspcon.active || drm_dp_downstream_444_to_420_conversion(intel_dp->dpcd, intel_dp->downstream_ports); + rgb_to_ycbcr = drm_dp_downstream_rgb_to_ycbcr_conversion(intel_dp->dpcd, + intel_dp->downstream_ports, + DP_DS_HDMI_BT601_RGB_YCBCR_CONV || + DP_DS_HDMI_BT709_RGB_YCBCR_CONV || + DP_DS_HDMI_BT2020_RGB_YCBCR_CONV); if (INTEL_GEN(i915) >= 11) { + /* Let PCON convert from RGB->YCbCr if possible */ + if (is_branch && rgb_to_ycbcr && ycbcr_444_to_420) { + intel_dp->dfp.rgb_to_ycbcr = true; + intel_dp->dfp.ycbcr_444_to_420 = true; + connector->base.ycbcr_420_allowed = true; + } else { /* Prefer 4:2:0 passthrough over 4:4:4->4:2:0 conversion */ - intel_dp->dfp.ycbcr_444_to_420 = - ycbcr_444_to_420 && !ycbcr_420_passthrough; + intel_dp->dfp.ycbcr_444_to_420 = + ycbcr_444_to_420 && !ycbcr_420_passthrough; - connector->base.ycbcr_420_allowed = - !is_branch || ycbcr_444_to_420 || ycbcr_420_passthrough; + connector->base.ycbcr_420_allowed = + !is_branch || ycbcr_444_to_420 || ycbcr_420_passthrough; + } } else { /* 4:4:4->4:2:0 conversion is the only way */ intel_dp->dfp.ycbcr_444_to_420 = ycbcr_444_to_420; @@ -6532,8 +6932,9 @@ intel_dp_update_420(struct intel_dp *intel_dp) } drm_dbg_kms(&i915->drm, - "[CONNECTOR:%d:%s] YCbCr 4:2:0 allowed? %s, YCbCr 4:4:4->4:2:0 conversion? %s\n", + "[CONNECTOR:%d:%s] RGB->YcbCr conversion? %s, YCbCr 4:2:0 allowed? %s, YCbCr 4:4:4->4:2:0 conversion? %s\n", connector->base.base.id, connector->base.name, + yesno(intel_dp->dfp.rgb_to_ycbcr), yesno(connector->base.ycbcr_420_allowed), yesno(intel_dp->dfp.ycbcr_444_to_420)); } @@ -6578,6 +6979,8 @@ intel_dp_unset_edid(struct intel_dp *intel_dp) intel_dp->dfp.min_tmds_clock = 0; intel_dp->dfp.max_tmds_clock = 0; + intel_dp->dfp.pcon_max_frl_bw = 0; + intel_dp->dfp.ycbcr_444_to_420 = false; connector->base.ycbcr_420_allowed = false; } @@ -6683,7 +7086,7 @@ intel_dp_detect(struct drm_connector *connector, to_intel_connector(connector)->detect_edid) status = connector_status_connected; - intel_dp_check_service_irq(intel_dp); + intel_dp_check_device_service_irq(intel_dp); out: if (status != connector_status_connected && !intel_dp->is_mst) @@ -8146,6 +8549,9 @@ intel_dp_init_connector(struct intel_digital_port *dig_port, (temp & ~0xf) | 0xd); } + intel_dp->frl.is_trained = false; + intel_dp->frl.trained_rate_gbps = 0; + return true; fail: diff --git a/drivers/gpu/drm/i915/display/intel_dp.h b/drivers/gpu/drm/i915/display/intel_dp.h index b871a09b6901..4280a09fd8fd 100644 --- a/drivers/gpu/drm/i915/display/intel_dp.h +++ b/drivers/gpu/drm/i915/display/intel_dp.h @@ -51,7 +51,8 @@ int intel_dp_get_link_train_fallback_values(struct intel_dp *intel_dp, int intel_dp_retrain_link(struct intel_encoder *encoder, struct drm_modeset_acquire_ctx *ctx); void intel_dp_set_power(struct intel_dp *intel_dp, u8 mode); -void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp); +void intel_dp_configure_protocol_converter(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state); void intel_dp_sink_set_decompression_state(struct intel_dp *intel_dp, const struct intel_crtc_state *crtc_state, bool enable); @@ -144,4 +145,8 @@ bool intel_dp_initial_fastset_check(struct intel_encoder *encoder, void intel_dp_sync_state(struct intel_encoder *encoder, const struct intel_crtc_state *crtc_state); +void intel_dp_check_frl_training(struct intel_dp *intel_dp); +void intel_dp_pcon_dsc_configure(struct intel_dp *intel_dp, + const struct intel_crtc_state *crtc_state); + #endif /* __INTEL_DP_H__ */ diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.c b/drivers/gpu/drm/i915/display/intel_hdmi.c index 82674a8853c6..a57796b0a47f 100644 --- a/drivers/gpu/drm/i915/display/intel_hdmi.c +++ b/drivers/gpu/drm/i915/display/intel_hdmi.c @@ -3438,3 +3438,236 @@ void intel_hdmi_init(struct drm_i915_private *dev_priv, dig_port->aux_ch = intel_bios_port_aux_ch(dev_priv, port); intel_hdmi_init_connector(dig_port, intel_connector); } + +/* + * intel_hdmi_dsc_get_slice_height - get the dsc slice_height + * @vactive: Vactive of a display mode + * + * @return: appropriate dsc slice height for a given mode. + */ +int intel_hdmi_dsc_get_slice_height(int vactive) +{ + int slice_height; + + /* + * Slice Height determination : HDMI2.1 Section 7.7.5.2 + * Select smallest slice height >=96, that results in a valid PPS and + * requires minimum padding lines required for final slice. + * + * Assumption : Vactive is even. + */ + for (slice_height = 96; slice_height <= vactive; slice_height += 2) + if (vactive % slice_height == 0) + return slice_height; + + return 0; +} + +/* + * intel_hdmi_dsc_get_num_slices - get no. of dsc slices based on dsc encoder + * and dsc decoder capabilities + * + * @crtc_state: intel crtc_state + * @src_max_slices: maximum slices supported by the DSC encoder + * @src_max_slice_width: maximum slice width supported by DSC encoder + * @hdmi_max_slices: maximum slices supported by sink DSC decoder + * @hdmi_throughput: maximum clock per slice (MHz) supported by HDMI sink + * + * @return: num of dsc slices that can be supported by the dsc encoder + * and decoder. + */ +int +intel_hdmi_dsc_get_num_slices(const struct intel_crtc_state *crtc_state, + int src_max_slices, int src_max_slice_width, + int hdmi_max_slices, int hdmi_throughput) +{ +/* Pixel rates in KPixels/sec */ +#define HDMI_DSC_PEAK_PIXEL_RATE 2720000 +/* + * Rates at which the source and sink are required to process pixels in each + * slice, can be two levels: either atleast 340000KHz or atleast 40000KHz. + */ +#define HDMI_DSC_MAX_ENC_THROUGHPUT_0 340000 +#define HDMI_DSC_MAX_ENC_THROUGHPUT_1 400000 + +/* Spec limits the slice width to 2720 pixels */ +#define MAX_HDMI_SLICE_WIDTH 2720 + int kslice_adjust; + int adjusted_clk_khz; + int min_slices; + int target_slices; + int max_throughput; /* max clock freq. in khz per slice */ + int max_slice_width; + int slice_width; + int pixel_clock = crtc_state->hw.adjusted_mode.crtc_clock; + + if (!hdmi_throughput) + return 0; + + /* + * Slice Width determination : HDMI2.1 Section 7.7.5.1 + * kslice_adjust factor for 4:2:0, and 4:2:2 formats is 0.5, where as + * for 4:4:4 is 1.0. Multiplying these factors by 10 and later + * dividing adjusted clock value by 10. + */ + if (crtc_state->output_format == INTEL_OUTPUT_FORMAT_YCBCR444 || + crtc_state->output_format == INTEL_OUTPUT_FORMAT_RGB) + kslice_adjust = 10; + else + kslice_adjust = 5; + + /* + * As per spec, the rate at which the source and the sink process + * the pixels per slice are at two levels: atleast 340Mhz or 400Mhz. + * This depends upon the pixel clock rate and output formats + * (kslice adjust). + * If pixel clock * kslice adjust >= 2720MHz slices can be processed + * at max 340MHz, otherwise they can be processed at max 400MHz. + */ + + adjusted_clk_khz = DIV_ROUND_UP(kslice_adjust * pixel_clock, 10); + + if (adjusted_clk_khz <= HDMI_DSC_PEAK_PIXEL_RATE) + max_throughput = HDMI_DSC_MAX_ENC_THROUGHPUT_0; + else + max_throughput = HDMI_DSC_MAX_ENC_THROUGHPUT_1; + + /* + * Taking into account the sink's capability for maximum + * clock per slice (in MHz) as read from HF-VSDB. + */ + max_throughput = min(max_throughput, hdmi_throughput * 1000); + + min_slices = DIV_ROUND_UP(adjusted_clk_khz, max_throughput); + max_slice_width = min(MAX_HDMI_SLICE_WIDTH, src_max_slice_width); + + /* + * Keep on increasing the num of slices/line, starting from min_slices + * per line till we get such a number, for which the slice_width is + * just less than max_slice_width. The slices/line selected should be + * less than or equal to the max horizontal slices that the combination + * of PCON encoder and HDMI decoder can support. + */ + slice_width = max_slice_width; + + do { + if (min_slices <= 1 && src_max_slices >= 1 && hdmi_max_slices >= 1) + target_slices = 1; + else if (min_slices <= 2 && src_max_slices >= 2 && hdmi_max_slices >= 2) + target_slices = 2; + else if (min_slices <= 4 && src_max_slices >= 4 && hdmi_max_slices >= 4) + target_slices = 4; + else if (min_slices <= 8 && src_max_slices >= 8 && hdmi_max_slices >= 8) + target_slices = 8; + else if (min_slices <= 12 && src_max_slices >= 12 && hdmi_max_slices >= 12) + target_slices = 12; + else if (min_slices <= 16 && src_max_slices >= 16 && hdmi_max_slices >= 16) + target_slices = 16; + else + return 0; + + slice_width = DIV_ROUND_UP(crtc_state->hw.adjusted_mode.hdisplay, target_slices); + if (slice_width >= max_slice_width) + min_slices = target_slices + 1; + } while (slice_width >= max_slice_width); + + return target_slices; +} + +/* + * intel_hdmi_dsc_get_bpp - get the appropriate compressed bits_per_pixel based on + * source and sink capabilities. + * + * @src_fraction_bpp: fractional bpp supported by the source + * @slice_width: dsc slice width supported by the source and sink + * @num_slices: num of slices supported by the source and sink + * @output_format: video output format + * @hdmi_all_bpp: sink supports decoding of 1/16th bpp setting + * @hdmi_max_chunk_bytes: max bytes in a line of chunks supported by sink + * + * @return: compressed bits_per_pixel in step of 1/16 of bits_per_pixel + */ +int +intel_hdmi_dsc_get_bpp(int src_fractional_bpp, int slice_width, int num_slices, + int output_format, bool hdmi_all_bpp, + int hdmi_max_chunk_bytes) +{ + int max_dsc_bpp, min_dsc_bpp; + int target_bytes; + bool bpp_found = false; + int bpp_decrement_x16; + int bpp_target; + int bpp_target_x16; + + /* + * Get min bpp and max bpp as per Table 7.23, in HDMI2.1 spec + * Start with the max bpp and keep on decrementing with + * fractional bpp, if supported by PCON DSC encoder + * + * for each bpp we check if no of bytes can be supported by HDMI sink + */ + + /* Assuming: bpc as 8*/ + if (output_format == INTEL_OUTPUT_FORMAT_YCBCR420) { + min_dsc_bpp = 6; + max_dsc_bpp = 3 * 4; /* 3*bpc/2 */ + } else if (output_format == INTEL_OUTPUT_FORMAT_YCBCR444 || + output_format == INTEL_OUTPUT_FORMAT_RGB) { + min_dsc_bpp = 8; + max_dsc_bpp = 3 * 8; /* 3*bpc */ + } else { + /* Assuming 4:2:2 encoding */ + min_dsc_bpp = 7; + max_dsc_bpp = 2 * 8; /* 2*bpc */ + } + + /* + * Taking into account if all dsc_all_bpp supported by HDMI2.1 sink + * Section 7.7.34 : Source shall not enable compressed Video + * Transport with bpp_target settings above 12 bpp unless + * DSC_all_bpp is set to 1. + */ + if (!hdmi_all_bpp) + max_dsc_bpp = min(max_dsc_bpp, 12); + + /* + * The Sink has a limit of compressed data in bytes for a scanline, + * as described in max_chunk_bytes field in HFVSDB block of edid. + * The no. of bytes depend on the target bits per pixel that the + * source configures. So we start with the max_bpp and calculate + * the target_chunk_bytes. We keep on decrementing the target_bpp, + * till we get the target_chunk_bytes just less than what the sink's + * max_chunk_bytes, or else till we reach the min_dsc_bpp. + * + * The decrement is according to the fractional support from PCON DSC + * encoder. For fractional BPP we use bpp_target as a multiple of 16. + * + * bpp_target_x16 = bpp_target * 16 + * So we need to decrement by {1, 2, 4, 8, 16} for fractional bpps + * {1/16, 1/8, 1/4, 1/2, 1} respectively. + */ + + bpp_target = max_dsc_bpp; + + /* src does not support fractional bpp implies decrement by 16 for bppx16 */ + if (!src_fractional_bpp) + src_fractional_bpp = 1; + bpp_decrement_x16 = DIV_ROUND_UP(16, src_fractional_bpp); + bpp_target_x16 = (bpp_target * 16) - bpp_decrement_x16; + + while (bpp_target_x16 > (min_dsc_bpp * 16)) { + int bpp; + + bpp = DIV_ROUND_UP(bpp_target_x16, 16); + target_bytes = DIV_ROUND_UP((num_slices * slice_width * bpp), 8); + if (target_bytes <= hdmi_max_chunk_bytes) { + bpp_found = true; + break; + } + bpp_target_x16 -= bpp_decrement_x16; + } + if (bpp_found) + return bpp_target_x16; + + return 0; +} diff --git a/drivers/gpu/drm/i915/display/intel_hdmi.h b/drivers/gpu/drm/i915/display/intel_hdmi.h index 15eb0ccde76e..fa1a9b030850 100644 --- a/drivers/gpu/drm/i915/display/intel_hdmi.h +++ b/drivers/gpu/drm/i915/display/intel_hdmi.h @@ -50,5 +50,12 @@ bool intel_hdmi_limited_color_range(const struct intel_crtc_state *crtc_state, const struct drm_connector_state *conn_state); bool intel_hdmi_deep_color_possible(const struct intel_crtc_state *crtc_state, int bpc, bool has_hdmi_sink, bool ycbcr420_output); +int intel_hdmi_dsc_get_bpp(int src_fractional_bpp, int slice_width, + int num_slices, int output_format, bool hdmi_all_bpp, + int hdmi_max_chunk_bytes); +int intel_hdmi_dsc_get_num_slices(const struct intel_crtc_state *crtc_state, + int src_max_slices, int src_max_slice_width, + int hdmi_max_slices, int hdmi_throughput); +int intel_hdmi_dsc_get_slice_height(int vactive); #endif /* __INTEL_HDMI_H__ */ |