diff options
Diffstat (limited to 'drivers/net/dsa/sja1105/sja1105_clocking.c')
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_clocking.c | 170 |
1 files changed, 150 insertions, 20 deletions
diff --git a/drivers/net/dsa/sja1105/sja1105_clocking.c b/drivers/net/dsa/sja1105/sja1105_clocking.c index 2a9b8a6a5306..387a1f2f161c 100644 --- a/drivers/net/dsa/sja1105/sja1105_clocking.c +++ b/drivers/net/dsa/sja1105/sja1105_clocking.c @@ -6,6 +6,8 @@ #include "sja1105.h" #define SJA1105_SIZE_CGU_CMD 4 +#define SJA1110_BASE_MCSS_CLK SJA1110_CGU_ADDR(0x70) +#define SJA1110_BASE_TIMER_CLK SJA1110_CGU_ADDR(0x74) /* Common structure for CFG_PAD_MIIx_RX and CFG_PAD_MIIx_TX */ struct sja1105_cfg_pad_mii { @@ -61,6 +63,12 @@ struct sja1105_cgu_pll_ctrl { u64 pd; }; +struct sja1110_cgu_outclk { + u64 clksrc; + u64 autoblock; + u64 pd; +}; + enum { CLKSRC_MII0_TX_CLK = 0x00, CLKSRC_MII0_RX_CLK = 0x01, @@ -110,6 +118,9 @@ static int sja1105_cgu_idiv_config(struct sja1105_private *priv, int port, struct sja1105_cgu_idiv idiv; u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + if (regs->cgu_idiv[port] == SJA1105_RSV_ADDR) + return 0; + if (enabled && factor != 1 && factor != 10) { dev_err(dev, "idiv factor must be 1 or 10\n"); return -ERANGE; @@ -159,6 +170,9 @@ static int sja1105_cgu_mii_tx_clk_config(struct sja1105_private *priv, u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; int clksrc; + if (regs->mii_tx_clk[port] == SJA1105_RSV_ADDR) + return 0; + if (role == XMII_MAC) clksrc = mac_clk_sources[port]; else @@ -188,6 +202,9 @@ sja1105_cgu_mii_rx_clk_config(struct sja1105_private *priv, int port) CLKSRC_MII4_RX_CLK, }; + if (regs->mii_rx_clk[port] == SJA1105_RSV_ADDR) + return 0; + /* Payload for packed_buf */ mii_rx_clk.clksrc = clk_sources[port]; mii_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ @@ -212,6 +229,9 @@ sja1105_cgu_mii_ext_tx_clk_config(struct sja1105_private *priv, int port) CLKSRC_IDIV4, }; + if (regs->mii_ext_tx_clk[port] == SJA1105_RSV_ADDR) + return 0; + /* Payload for packed_buf */ mii_ext_tx_clk.clksrc = clk_sources[port]; mii_ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ @@ -236,6 +256,9 @@ sja1105_cgu_mii_ext_rx_clk_config(struct sja1105_private *priv, int port) CLKSRC_IDIV4, }; + if (regs->mii_ext_rx_clk[port] == SJA1105_RSV_ADDR) + return 0; + /* Payload for packed_buf */ mii_ext_rx_clk.clksrc = clk_sources[port]; mii_ext_rx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ @@ -313,14 +336,17 @@ sja1105_cgu_pll_control_packing(void *buf, struct sja1105_cgu_pll_ctrl *cmd, } static int sja1105_cgu_rgmii_tx_clk_config(struct sja1105_private *priv, - int port, sja1105_speed_t speed) + int port, u64 speed) { const struct sja1105_regs *regs = priv->info->regs; struct sja1105_cgu_mii_ctrl txc; u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; int clksrc; - if (speed == SJA1105_SPEED_1000MBPS) { + if (regs->rgmii_tx_clk[port] == SJA1105_RSV_ADDR) + return 0; + + if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) { clksrc = CLKSRC_PLL0; } else { int clk_sources[] = {CLKSRC_IDIV0, CLKSRC_IDIV1, CLKSRC_IDIV2, @@ -368,6 +394,9 @@ static int sja1105_rgmii_cfg_pad_tx_config(struct sja1105_private *priv, struct sja1105_cfg_pad_mii pad_mii_tx = {0}; u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + if (regs->pad_mii_tx[port] == SJA1105_RSV_ADDR) + return 0; + /* Payload */ pad_mii_tx.d32_os = 3; /* TXD[3:2] output stage: */ /* high noise/high speed */ @@ -394,6 +423,9 @@ static int sja1105_cfg_pad_rx_config(struct sja1105_private *priv, int port) struct sja1105_cfg_pad_mii pad_mii_rx = {0}; u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + if (regs->pad_mii_rx[port] == SJA1105_RSV_ADDR) + return 0; + /* Payload */ pad_mii_rx.d32_ih = 0; /* RXD[3:2] input stage hysteresis: */ /* non-Schmitt (default) */ @@ -437,6 +469,35 @@ sja1105_cfg_pad_mii_id_packing(void *buf, struct sja1105_cfg_pad_mii_id *cmd, sja1105_packing(buf, &cmd->txc_pd, 0, 0, size, op); } +static void +sja1110_cfg_pad_mii_id_packing(void *buf, struct sja1105_cfg_pad_mii_id *cmd, + enum packing_op op) +{ + const int size = SJA1105_SIZE_CGU_CMD; + u64 range = 4; + + /* Fields RXC_RANGE and TXC_RANGE select the input frequency range: + * 0 = 2.5MHz + * 1 = 25MHz + * 2 = 50MHz + * 3 = 125MHz + * 4 = Automatically determined by port speed. + * There's no point in defining a structure different than the one for + * SJA1105, so just hardcode the frequency range to automatic, just as + * before. + */ + sja1105_packing(buf, &cmd->rxc_stable_ovr, 26, 26, size, op); + sja1105_packing(buf, &cmd->rxc_delay, 25, 21, size, op); + sja1105_packing(buf, &range, 20, 18, size, op); + sja1105_packing(buf, &cmd->rxc_bypass, 17, 17, size, op); + sja1105_packing(buf, &cmd->rxc_pd, 16, 16, size, op); + sja1105_packing(buf, &cmd->txc_stable_ovr, 10, 10, size, op); + sja1105_packing(buf, &cmd->txc_delay, 9, 5, size, op); + sja1105_packing(buf, &range, 4, 2, size, op); + sja1105_packing(buf, &cmd->txc_bypass, 1, 1, size, op); + sja1105_packing(buf, &cmd->txc_pd, 0, 0, size, op); +} + /* Valid range in degrees is an integer between 73.8 and 101.7 */ static u64 sja1105_rgmii_delay(u64 phase) { @@ -495,40 +556,65 @@ int sja1105pqrs_setup_rgmii_delay(const void *ctx, int port) packed_buf, SJA1105_SIZE_CGU_CMD); } +int sja1110_setup_rgmii_delay(const void *ctx, int port) +{ + const struct sja1105_private *priv = ctx; + const struct sja1105_regs *regs = priv->info->regs; + struct sja1105_cfg_pad_mii_id pad_mii_id = {0}; + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + + pad_mii_id.rxc_pd = 1; + pad_mii_id.txc_pd = 1; + + if (priv->rgmii_rx_delay[port]) { + pad_mii_id.rxc_delay = sja1105_rgmii_delay(90); + /* The "BYPASS" bit in SJA1110 is actually a "don't bypass" */ + pad_mii_id.rxc_bypass = 1; + pad_mii_id.rxc_pd = 0; + } + + if (priv->rgmii_tx_delay[port]) { + pad_mii_id.txc_delay = sja1105_rgmii_delay(90); + pad_mii_id.txc_bypass = 1; + pad_mii_id.txc_pd = 0; + } + + sja1110_cfg_pad_mii_id_packing(packed_buf, &pad_mii_id, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, regs->pad_mii_id[port], + packed_buf, SJA1105_SIZE_CGU_CMD); +} + static int sja1105_rgmii_clocking_setup(struct sja1105_private *priv, int port, sja1105_mii_role_t role) { struct device *dev = priv->ds->dev; struct sja1105_mac_config_entry *mac; - sja1105_speed_t speed; + u64 speed; int rc; mac = priv->static_config.tables[BLK_IDX_MAC_CONFIG].entries; speed = mac[port].speed; - dev_dbg(dev, "Configuring port %d RGMII at speed %dMbps\n", + dev_dbg(dev, "Configuring port %d RGMII at speed %lldMbps\n", port, speed); - switch (speed) { - case SJA1105_SPEED_1000MBPS: + if (speed == priv->info->port_speed[SJA1105_SPEED_1000MBPS]) { /* 1000Mbps, IDIV disabled (125 MHz) */ rc = sja1105_cgu_idiv_config(priv, port, false, 1); - break; - case SJA1105_SPEED_100MBPS: + } else if (speed == priv->info->port_speed[SJA1105_SPEED_100MBPS]) { /* 100Mbps, IDIV enabled, divide by 1 (25 MHz) */ rc = sja1105_cgu_idiv_config(priv, port, true, 1); - break; - case SJA1105_SPEED_10MBPS: + } else if (speed == priv->info->port_speed[SJA1105_SPEED_10MBPS]) { /* 10Mbps, IDIV enabled, divide by 10 (2.5 MHz) */ rc = sja1105_cgu_idiv_config(priv, port, true, 10); - break; - case SJA1105_SPEED_AUTO: + } else if (speed == priv->info->port_speed[SJA1105_SPEED_AUTO]) { /* Skip CGU configuration if there is no speed available * (e.g. link is not established yet) */ dev_dbg(dev, "Speed not available, skipping CGU config\n"); return 0; - default: + } else { rc = -EINVAL; } @@ -546,14 +632,9 @@ static int sja1105_rgmii_clocking_setup(struct sja1105_private *priv, int port, dev_err(dev, "Failed to configure Tx pad registers\n"); return rc; } + if (!priv->info->setup_rgmii_delay) return 0; - /* The role has no hardware effect for RGMII. However we use it as - * a proxy for this interface being a MAC-to-MAC connection, with - * the RGMII internal delays needing to be applied by us. - */ - if (role == XMII_MAC) - return 0; return priv->info->setup_rgmii_delay(priv, port); } @@ -572,6 +653,9 @@ static int sja1105_cgu_rmii_ref_clk_config(struct sja1105_private *priv, CLKSRC_MII4_TX_CLK, }; + if (regs->rmii_ref_clk[port] == SJA1105_RSV_ADDR) + return 0; + /* Payload for packed_buf */ ref_clk.clksrc = clk_sources[port]; ref_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ @@ -589,6 +673,9 @@ sja1105_cgu_rmii_ext_tx_clk_config(struct sja1105_private *priv, int port) struct sja1105_cgu_mii_ctrl ext_tx_clk; u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + if (regs->rmii_ext_tx_clk[port] == SJA1105_RSV_ADDR) + return 0; + /* Payload for packed_buf */ ext_tx_clk.clksrc = CLKSRC_PLL1; ext_tx_clk.autoblock = 1; /* Autoblock clk while changing clksrc */ @@ -607,6 +694,9 @@ static int sja1105_cgu_rmii_pll_config(struct sja1105_private *priv) struct device *dev = priv->ds->dev; int rc; + if (regs->rmii_pll1 == SJA1105_RSV_ADDR) + return 0; + /* PLL1 must be enabled and output 50 Mhz. * This is done by writing first 0x0A010941 to * the PLL_1_C register and then deasserting @@ -721,12 +811,52 @@ int sja1105_clocking_setup_port(struct sja1105_private *priv, int port) int sja1105_clocking_setup(struct sja1105_private *priv) { + struct dsa_switch *ds = priv->ds; int port, rc; - for (port = 0; port < SJA1105_NUM_PORTS; port++) { + for (port = 0; port < ds->num_ports; port++) { rc = sja1105_clocking_setup_port(priv, port); if (rc < 0) return rc; } return 0; } + +static void +sja1110_cgu_outclk_packing(void *buf, struct sja1110_cgu_outclk *outclk, + enum packing_op op) +{ + const int size = 4; + + sja1105_packing(buf, &outclk->clksrc, 27, 24, size, op); + sja1105_packing(buf, &outclk->autoblock, 11, 11, size, op); + sja1105_packing(buf, &outclk->pd, 0, 0, size, op); +} + +int sja1110_disable_microcontroller(struct sja1105_private *priv) +{ + u8 packed_buf[SJA1105_SIZE_CGU_CMD] = {0}; + struct sja1110_cgu_outclk outclk_6_c = { + .clksrc = 0x3, + .pd = true, + }; + struct sja1110_cgu_outclk outclk_7_c = { + .clksrc = 0x5, + .pd = true, + }; + int rc; + + /* Power down the BASE_TIMER_CLK to disable the watchdog timer */ + sja1110_cgu_outclk_packing(packed_buf, &outclk_7_c, PACK); + + rc = sja1105_xfer_buf(priv, SPI_WRITE, SJA1110_BASE_TIMER_CLK, + packed_buf, SJA1105_SIZE_CGU_CMD); + if (rc) + return rc; + + /* Power down the BASE_MCSS_CLOCK to gate the microcontroller off */ + sja1110_cgu_outclk_packing(packed_buf, &outclk_6_c, PACK); + + return sja1105_xfer_buf(priv, SPI_WRITE, SJA1110_BASE_MCSS_CLK, + packed_buf, SJA1105_SIZE_CGU_CMD); +} |