diff options
Diffstat (limited to 'drivers/net/phy')
| -rw-r--r-- | drivers/net/phy/dp83867.c | 7 | ||||
| -rw-r--r-- | drivers/net/phy/marvell.c | 16 |
2 files changed, 16 insertions, 7 deletions
diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 417527f8bbf5..7446d5c6c714 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -682,6 +682,13 @@ static int dp83867_of_init(struct phy_device *phydev) */ dp83867->io_impedance = DP83867_IO_MUX_CFG_IO_IMPEDANCE_MIN / 2; + /* For non-OF device, the RX and TX FIFO depths are taken from + * default value. So, we init RX & TX FIFO depths here + * so that it is configured correctly later in dp83867_config_init(); + */ + dp83867->tx_fifo_depth = DP83867_PHYCR_FIFO_DEPTH_4_B_NIB; + dp83867->rx_fifo_depth = DP83867_PHYCR_FIFO_DEPTH_4_B_NIB; + return 0; } #endif /* CONFIG_OF_MDIO */ diff --git a/drivers/net/phy/marvell.c b/drivers/net/phy/marvell.c index 2810f4f9da0c..0d706ee266af 100644 --- a/drivers/net/phy/marvell.c +++ b/drivers/net/phy/marvell.c @@ -2015,14 +2015,16 @@ static int m88e1510_loopback(struct phy_device *phydev, bool enable) if (err < 0) return err; - /* FIXME: Based on trial and error test, it seem 1G need to have - * delay between soft reset and loopback enablement. - */ - if (phydev->speed == SPEED_1000) - msleep(1000); + err = phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK, + BMCR_LOOPBACK); - return phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK, - BMCR_LOOPBACK); + if (!err) { + /* It takes some time for PHY device to switch + * into/out-of loopback mode. + */ + msleep(1000); + } + return err; } else { err = phy_modify(phydev, MII_BMCR, BMCR_LOOPBACK, 0); if (err < 0) |