aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/68360serial.c6
-rw-r--r--drivers/serial/amba-pl010.c2
-rw-r--r--drivers/serial/amba-pl011.c90
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c2
-rw-r--r--drivers/serial/nwpserial.c2
-rw-r--r--drivers/serial/sn_console.c6
6 files changed, 85 insertions, 23 deletions
diff --git a/drivers/serial/68360serial.c b/drivers/serial/68360serial.c
index 24661cd5e4fb..768612f8e41e 100644
--- a/drivers/serial/68360serial.c
+++ b/drivers/serial/68360serial.c
@@ -2649,7 +2649,7 @@ static int __init rs_360_init(void)
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
sup->mrblr = 1;
@@ -2728,7 +2728,7 @@ static int __init rs_360_init(void)
up->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
up->mrblr = 1;
@@ -2886,7 +2886,7 @@ int serial_console_setup( struct console *co, char *options)
sup->tfcr = SMC_EB;
/* Set this to 1 for now, so we get single
- * character interrupts. Using idle charater
+ * character interrupts. Using idle character
* time requires some additional tuning.
*/
sup->mrblr = 1;
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index b09a638d051f..50441ffe8e38 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -782,7 +782,7 @@ static int pl010_resume(struct amba_device *dev)
return 0;
}
-static struct amba_id pl010_ids[] __initdata = {
+static struct amba_id pl010_ids[] = {
{
.id = 0x00041010,
.mask = 0x000fffff,
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index eb4cb480b93e..6ca7a44f29c2 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -69,9 +69,12 @@
struct uart_amba_port {
struct uart_port port;
struct clk *clk;
- unsigned int im; /* interrupt mask */
+ unsigned int im; /* interrupt mask */
unsigned int old_status;
- unsigned int ifls; /* vendor-specific */
+ unsigned int ifls; /* vendor-specific */
+ unsigned int lcrh_tx; /* vendor-specific */
+ unsigned int lcrh_rx; /* vendor-specific */
+ bool oversampling; /* vendor-specific */
bool autorts;
};
@@ -79,16 +82,25 @@ struct uart_amba_port {
struct vendor_data {
unsigned int ifls;
unsigned int fifosize;
+ unsigned int lcrh_tx;
+ unsigned int lcrh_rx;
+ bool oversampling;
};
static struct vendor_data vendor_arm = {
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
.fifosize = 16,
+ .lcrh_tx = UART011_LCRH,
+ .lcrh_rx = UART011_LCRH,
+ .oversampling = false,
};
static struct vendor_data vendor_st = {
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
.fifosize = 64,
+ .lcrh_tx = ST_UART011_LCRH_TX,
+ .lcrh_rx = ST_UART011_LCRH_RX,
+ .oversampling = true,
};
static void pl011_stop_tx(struct uart_port *port)
@@ -327,12 +339,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
- lcr_h = readw(uap->port.membase + UART011_LCRH);
+ lcr_h = readw(uap->port.membase + uap->lcrh_tx);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
lcr_h &= ~UART01x_LCRH_BRK;
- writew(lcr_h, uap->port.membase + UART011_LCRH);
+ writew(lcr_h, uap->port.membase + uap->lcrh_tx);
spin_unlock_irqrestore(&uap->port.lock, flags);
}
@@ -393,7 +405,17 @@ static int pl011_startup(struct uart_port *port)
writew(cr, uap->port.membase + UART011_CR);
writew(0, uap->port.membase + UART011_FBRD);
writew(1, uap->port.membase + UART011_IBRD);
- writew(0, uap->port.membase + UART011_LCRH);
+ writew(0, uap->port.membase + uap->lcrh_rx);
+ if (uap->lcrh_tx != uap->lcrh_rx) {
+ int i;
+ /*
+ * Wait 10 PCLKs before writing LCRH_TX register,
+ * to get this delay write read only register 10 times
+ */
+ for (i = 0; i < 10; ++i)
+ writew(0xff, uap->port.membase + UART011_MIS);
+ writew(0, uap->port.membase + uap->lcrh_tx);
+ }
writew(0, uap->port.membase + UART01x_DR);
while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
barrier();
@@ -422,10 +444,19 @@ static int pl011_startup(struct uart_port *port)
return retval;
}
+static void pl011_shutdown_channel(struct uart_amba_port *uap,
+ unsigned int lcrh)
+{
+ unsigned long val;
+
+ val = readw(uap->port.membase + lcrh);
+ val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+ writew(val, uap->port.membase + lcrh);
+}
+
static void pl011_shutdown(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned long val;
/*
* disable all interrupts
@@ -450,9 +481,9 @@ static void pl011_shutdown(struct uart_port *port)
/*
* disable break condition and fifos
*/
- val = readw(uap->port.membase + UART011_LCRH);
- val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
- writew(val, uap->port.membase + UART011_LCRH);
+ pl011_shutdown_channel(uap, uap->lcrh_rx);
+ if (uap->lcrh_rx != uap->lcrh_tx)
+ pl011_shutdown_channel(uap, uap->lcrh_tx);
/*
* Shut down the clock producer
@@ -472,8 +503,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = port->uartclk * 4 / baud;
+ baud = uart_get_baud_rate(port, termios, old, 0,
+ port->uartclk/(uap->oversampling ? 8 : 16));
+
+ if (baud > port->uartclk/16)
+ quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud);
+ else
+ quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud);
switch (termios->c_cflag & CSIZE) {
case CS5:
@@ -552,6 +588,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
uap->autorts = false;
}
+ if (uap->oversampling) {
+ if (baud > port->uartclk/16)
+ old_cr |= ST_UART011_CR_OVSFACT;
+ else
+ old_cr &= ~ST_UART011_CR_OVSFACT;
+ }
+
/* Set baud rate */
writew(quot & 0x3f, port->membase + UART011_FBRD);
writew(quot >> 6, port->membase + UART011_IBRD);
@@ -561,7 +604,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
* NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
* ----------^----------^----------^----------^-----
*/
- writew(lcr_h, port->membase + UART011_LCRH);
+ writew(lcr_h, port->membase + uap->lcrh_rx);
+ if (uap->lcrh_rx != uap->lcrh_tx) {
+ int i;
+ /*
+ * Wait 10 PCLKs before writing LCRH_TX register,
+ * to get this delay write read only register 10 times
+ */
+ for (i = 0; i < 10; ++i)
+ writew(0xff, uap->port.membase + UART011_MIS);
+ writew(lcr_h, port->membase + uap->lcrh_tx);
+ }
writew(old_cr, port->membase + UART011_CR);
spin_unlock_irqrestore(&port->lock, flags);
@@ -688,7 +741,7 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd;
- lcr_h = readw(uap->port.membase + UART011_LCRH);
+ lcr_h = readw(uap->port.membase + uap->lcrh_tx);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
@@ -707,6 +760,12 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
fbrd = readw(uap->port.membase + UART011_FBRD);
*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+
+ if (uap->oversampling) {
+ if (readw(uap->port.membase + UART011_CR)
+ & ST_UART011_CR_OVSFACT)
+ *baud *= 2;
+ }
}
}
@@ -800,6 +859,9 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
}
uap->ifls = vendor->ifls;
+ uap->lcrh_rx = vendor->lcrh_rx;
+ uap->lcrh_tx = vendor->lcrh_tx;
+ uap->oversampling = vendor->oversampling;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
@@ -868,7 +930,7 @@ static int pl011_resume(struct amba_device *dev)
}
#endif
-static struct amba_id pl011_ids[] __initdata = {
+static struct amba_id pl011_ids[] = {
{
.id = 0x00041011,
.mask = 0x000fffff,
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index cd6cf575902e..6016179db533 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -852,7 +852,7 @@ static void cpm_uart_init_smc(struct uart_cpm_port *pinfo)
*/
cpm_set_smc_fcr(up);
- /* Using idle charater time requires some additional tuning. */
+ /* Using idle character time requires some additional tuning. */
out_be16(&up->smc_mrblr, pinfo->rx_fifosize);
out_be16(&up->smc_maxidl, pinfo->rx_fifosize);
out_be16(&up->smc_brklen, 0);
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 3c02fa96f282..e65b0d9202a5 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -81,7 +81,7 @@ nwpserial_console_write(struct console *co, const char *s, unsigned int count)
uart_console_write(&up->port, s, count, nwpserial_console_putchar);
- /* wait for transmitter to become emtpy */
+ /* wait for transmitter to become empty */
while ((dcr_read(up->dcr_host, UART_LSR) & UART_LSR_THRE) == 0)
cpu_relax();
diff --git a/drivers/serial/sn_console.c b/drivers/serial/sn_console.c
index 9794e0cd3dcc..7e5e5efea4e2 100644
--- a/drivers/serial/sn_console.c
+++ b/drivers/serial/sn_console.c
@@ -470,7 +470,7 @@ sn_receive_chars(struct sn_cons_port *port, unsigned long flags)
}
if (port->sc_port.state) {
- /* The serial_core stuffs are initilized, use them */
+ /* The serial_core stuffs are initialized, use them */
tty = port->sc_port.state->port.tty;
}
else {
@@ -551,11 +551,11 @@ static void sn_transmit_chars(struct sn_cons_port *port, int raw)
BUG_ON(!port->sc_is_asynch);
if (port->sc_port.state) {
- /* We're initilized, using serial core infrastructure */
+ /* We're initialized, using serial core infrastructure */
xmit = &port->sc_port.state->xmit;
} else {
/* Probably sn_sal_switch_to_asynch has been run but serial core isn't
- * initilized yet. Just return. Writes are going through
+ * initialized yet. Just return. Writes are going through
* sn_sal_console_write (due to register_console) at this time.
*/
return;
generated by cgit (git 2.34.1) at 2025-03-01 10:50:18 +0000