1 files changed, 30 insertions, 8 deletions

diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 00ad2637b08c..d4036038a4dd 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -1315,6 +1315,13 @@ static void autoconfig(struct uart_8250_port *up)
 
 out_lock:
 	spin_unlock_irqrestore(&port->lock, flags);
+
+	/*
+	 * Check if the device is a Fintek F81216A
+	 */
+	if (port->type == PORT_16550A)
+		fintek_8250_probe(up);
+
 	if (up->capabilities != old_capabilities) {
 		pr_warn("ttyS%d: detected caps %08x should be %08x\n",
 		       serial_index(port), old_capabilities,
@@ -1788,6 +1795,18 @@ unsigned int serial8250_modem_status(struct uart_8250_port *up)
 }
 EXPORT_SYMBOL_GPL(serial8250_modem_status);
 
+static bool handle_rx_dma(struct uart_8250_port *up, unsigned int iir)
+{
+	switch (iir & 0x3f) {
+	case UART_IIR_RX_TIMEOUT:
+		serial8250_rx_dma_flush(up);
+		/* fall-through */
+	case UART_IIR_RLSI:
+		return true;
+	}
+	return up->dma->rx_dma(up);
+}
+
 /*
  * This handles the interrupt from one port.
  */
@@ -1796,7 +1815,6 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 	unsigned char status;
 	unsigned long flags;
 	struct uart_8250_port *up = up_to_u8250p(port);
-	int dma_err = 0;
 
 	if (iir & UART_IIR_NO_INT)
 		return 0;
@@ -1808,15 +1826,11 @@ int serial8250_handle_irq(struct uart_port *port, unsigned int iir)
 	DEBUG_INTR("status = %x...", status);
 
 	if (status & (UART_LSR_DR | UART_LSR_BI)) {
-		if (up->dma)
-			dma_err = up->dma->rx_dma(up, iir);
-
-		if (!up->dma || dma_err)
+		if (!up->dma || handle_rx_dma(up, iir))
 			status = serial8250_rx_chars(up, status);
 	}
 	serial8250_modem_status(up);
-	if ((!up->dma || (up->dma && up->dma->tx_err)) &&
-	    (status & UART_LSR_THRE))
+	if ((!up->dma || up->dma->tx_err) && (status & UART_LSR_THRE))
 		serial8250_tx_chars(up);
 
 	spin_unlock_irqrestore(&port->lock, flags);
@@ -1882,7 +1896,7 @@ static unsigned int serial8250_tx_empty(struct uart_port *port)
 	return (lsr & BOTH_EMPTY) == BOTH_EMPTY ? TIOCSER_TEMT : 0;
 }
 
-static unsigned int serial8250_get_mctrl(struct uart_port *port)
+unsigned int serial8250_do_get_mctrl(struct uart_port *port)
 {
 	struct uart_8250_port *up = up_to_u8250p(port);
 	unsigned int status;
@@ -1903,6 +1917,14 @@ static unsigned int serial8250_get_mctrl(struct uart_port *port)
 		ret |= TIOCM_CTS;
 	return ret;
 }
+EXPORT_SYMBOL_GPL(serial8250_do_get_mctrl);
+
+static unsigned int serial8250_get_mctrl(struct uart_port *port)
+{
+	if (port->get_mctrl)
+		return port->get_mctrl(port);
+	return serial8250_do_get_mctrl(port);
+}
 
 void serial8250_do_set_mctrl(struct uart_port *port, unsigned int mctrl)
 {