4 files changed, 20 insertions, 28 deletions

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index c0e7c76dc5c8..1f348bc867c2 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1711,6 +1711,16 @@ static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 		return extcon_get_extcon_dev(name);
 
 	/*
+	 * Check explicitly if "usb-role-switch" is used since
+	 * extcon_find_edev_by_node() can not be used to check the absence of
+	 * an extcon device. In the absence of an device it will always return
+	 * EPROBE_DEFER.
+	 */
+	if (IS_ENABLED(CONFIG_USB_ROLE_SWITCH) &&
+	    device_property_read_bool(dev, "usb-role-switch"))
+		return NULL;
+
+	/*
 	 * Try to get an extcon device from the USB PHY controller's "port"
 	 * node. Check if it has the "port" node first, to avoid printing the
 	 * error message from underlying code, as it's a valid case: extcon
diff --git a/drivers/usb/dwc3/dwc3-exynos.c b/drivers/usb/dwc3/dwc3-exynos.c
index 0ecf20eeceee..4be6a873bd07 100644
--- a/drivers/usb/dwc3/dwc3-exynos.c
+++ b/drivers/usb/dwc3/dwc3-exynos.c
@@ -37,15 +37,6 @@ struct dwc3_exynos {
 	struct regulator	*vdd10;
 };
 
-static int dwc3_exynos_remove_child(struct device *dev, void *unused)
-{
-	struct platform_device *pdev = to_platform_device(dev);
-
-	platform_device_unregister(pdev);
-
-	return 0;
-}
-
 static int dwc3_exynos_probe(struct platform_device *pdev)
 {
 	struct dwc3_exynos	*exynos;
@@ -142,7 +133,7 @@ static int dwc3_exynos_remove(struct platform_device *pdev)
 	struct dwc3_exynos	*exynos = platform_get_drvdata(pdev);
 	int i;
 
-	device_for_each_child(&pdev->dev, NULL, dwc3_exynos_remove_child);
+	of_platform_depopulate(&pdev->dev);
 
 	for (i = exynos->num_clks - 1; i >= 0; i--)
 		clk_disable_unprepare(exynos->clks[i]);
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 5fe2d136dff5..6d524fa76443 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -291,7 +291,8 @@ int dwc3_send_gadget_ep_cmd(struct dwc3_ep *dep, unsigned int cmd,
 	 *
 	 * DWC_usb3 3.30a and DWC_usb31 1.90a programming guide section 3.2.2
 	 */
-	if (dwc->gadget->speed <= USB_SPEED_HIGH) {
+	if (dwc->gadget->speed <= USB_SPEED_HIGH ||
+	    DWC3_DEPCMD_CMD(cmd) == DWC3_DEPCMD_ENDTRANSFER) {
 		reg = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0));
 		if (unlikely(reg & DWC3_GUSB2PHYCFG_SUSPHY)) {
 			saved_config |= DWC3_GUSB2PHYCFG_SUSPHY;
@@ -1023,13 +1024,7 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 	reg &= ~DWC3_DALEPENA_EP(dep->number);
 	dwc3_writel(dwc->regs, DWC3_DALEPENA, reg);
 
-	/* Clear out the ep descriptors for non-ep0 */
-	if (dep->number > 1) {
-		dep->endpoint.comp_desc = NULL;
-		dep->endpoint.desc = NULL;
-	}
-
-	dwc3_remove_requests(dwc, dep, -ECONNRESET);
+	dwc3_remove_requests(dwc, dep, -ESHUTDOWN);
 
 	dep->stream_capable = false;
 	dep->type = 0;
@@ -1043,6 +1038,12 @@ static int __dwc3_gadget_ep_disable(struct dwc3_ep *dep)
 		mask |= (DWC3_EP_DELAY_STOP | DWC3_EP_TRANSFER_STARTED);
 	dep->flags &= mask;
 
+	/* Clear out the ep descriptors for non-ep0 */
+	if (dep->number > 1) {
+		dep->endpoint.comp_desc = NULL;
+		dep->endpoint.desc = NULL;
+	}
+
 	return 0;
 }
 
diff --git a/drivers/usb/dwc3/host.c b/drivers/usb/dwc3/host.c
index a7154fe8206d..f6f13e7f1ba1 100644
--- a/drivers/usb/dwc3/host.c
+++ b/drivers/usb/dwc3/host.c
@@ -11,13 +11,8 @@
 #include <linux/of.h>
 #include <linux/platform_device.h>
 
-#include "../host/xhci-plat.h"
 #include "core.h"
 
-static const struct xhci_plat_priv dwc3_xhci_plat_priv = {
-	.quirks = XHCI_SKIP_PHY_INIT,
-};
-
 static void dwc3_host_fill_xhci_irq_res(struct dwc3 *dwc,
 					int irq, char *name)
 {
@@ -97,11 +92,6 @@ int dwc3_host_init(struct dwc3 *dwc)
 		goto err;
 	}
 
-	ret = platform_device_add_data(xhci, &dwc3_xhci_plat_priv,
-					sizeof(dwc3_xhci_plat_priv));
-	if (ret)
-		goto err;
-
 	memset(props, 0, sizeof(struct property_entry) * ARRAY_SIZE(props));
 
 	if (dwc->usb3_lpm_capable)