diff options
Diffstat (limited to 'drivers/usb/gadget/udc')
| -rw-r--r-- | drivers/usb/gadget/udc/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/udc/Makefile | 1 | ||||
| -rw-r--r-- | drivers/usb/gadget/udc/aspeed-vhub/epn.c | 5 | ||||
| -rw-r--r-- | drivers/usb/gadget/udc/bdc/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/usb/gadget/udc/core.c | 16 | ||||
| -rw-r--r-- | drivers/usb/gadget/udc/dummy_hcd.c | 45 | ||||
| -rw-r--r-- | drivers/usb/gadget/udc/fsl_mxc_udc.c | 122 |
7 files changed, 47 insertions, 146 deletions
diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 1a12aab208b4..8c614bb86c66 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -90,7 +90,7 @@ config USB_BCM63XX_UDC config USB_FSL_USB2 tristate "Freescale Highspeed USB DR Peripheral Controller" - depends on FSL_SOC || ARCH_MXC + depends on FSL_SOC help Some of Freescale PowerPC and i.MX processors have a High Speed Dual-Role(DR) USB controller, which supports device mode. diff --git a/drivers/usb/gadget/udc/Makefile b/drivers/usb/gadget/udc/Makefile index f5a7ce28aecd..a21f2224e7eb 100644 --- a/drivers/usb/gadget/udc/Makefile +++ b/drivers/usb/gadget/udc/Makefile @@ -23,7 +23,6 @@ obj-$(CONFIG_USB_ATMEL_USBA) += atmel_usba_udc.o obj-$(CONFIG_USB_BCM63XX_UDC) += bcm63xx_udc.o obj-$(CONFIG_USB_FSL_USB2) += fsl_usb2_udc.o fsl_usb2_udc-y := fsl_udc_core.o -fsl_usb2_udc-$(CONFIG_ARCH_MXC) += fsl_mxc_udc.o obj-$(CONFIG_USB_TEGRA_XUDC) += tegra-xudc.o obj-$(CONFIG_USB_M66592) += m66592-udc.o obj-$(CONFIG_USB_R8A66597) += r8a66597-udc.o diff --git a/drivers/usb/gadget/udc/aspeed-vhub/epn.c b/drivers/usb/gadget/udc/aspeed-vhub/epn.c index 0bd6b20435b8..02d8bfae58fb 100644 --- a/drivers/usb/gadget/udc/aspeed-vhub/epn.c +++ b/drivers/usb/gadget/udc/aspeed-vhub/epn.c @@ -420,7 +420,10 @@ static void ast_vhub_stop_active_req(struct ast_vhub_ep *ep, u32 state, reg, loops; /* Stop DMA activity */ - writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + if (ep->epn.desc_mode) + writel(VHUB_EP_DMA_CTRL_RESET, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); + else + writel(0, ep->epn.regs + AST_VHUB_EP_DMA_CTLSTAT); /* Wait for it to complete */ for (loops = 0; loops < 1000; loops++) { diff --git a/drivers/usb/gadget/udc/bdc/Kconfig b/drivers/usb/gadget/udc/bdc/Kconfig index 3e88c7670b2e..fb01ff47b64c 100644 --- a/drivers/usb/gadget/udc/bdc/Kconfig +++ b/drivers/usb/gadget/udc/bdc/Kconfig @@ -17,7 +17,7 @@ if USB_BDC_UDC comment "Platform Support" config USB_BDC_PCI tristate "BDC support for PCIe based platforms" - depends on USB_PCI + depends on USB_PCI && BROKEN default USB_BDC_UDC help Enable support for platforms which have BDC connected through PCIe, such as Lego3 FPGA platform. diff --git a/drivers/usb/gadget/udc/core.c b/drivers/usb/gadget/udc/core.c index 5b5cfeb6c14a..ea114f922ccf 100644 --- a/drivers/usb/gadget/udc/core.c +++ b/drivers/usb/gadget/udc/core.c @@ -659,8 +659,7 @@ EXPORT_SYMBOL_GPL(usb_gadget_vbus_disconnect); * * Enables the D+ (or potentially D-) pullup. The host will start * enumerating this gadget when the pullup is active and a VBUS session - * is active (the link is powered). This pullup is always enabled unless - * usb_gadget_disconnect() has been used to disable it. + * is active (the link is powered). * * Returns zero on success, else negative errno. */ @@ -1530,10 +1529,13 @@ static ssize_t soft_connect_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t n) { struct usb_udc *udc = container_of(dev, struct usb_udc, dev); + ssize_t ret; + mutex_lock(&udc_lock); if (!udc->driver) { dev_err(dev, "soft-connect without a gadget driver\n"); - return -EOPNOTSUPP; + ret = -EOPNOTSUPP; + goto out; } if (sysfs_streq(buf, "connect")) { @@ -1544,10 +1546,14 @@ static ssize_t soft_connect_store(struct device *dev, usb_gadget_udc_stop(udc); } else { dev_err(dev, "unsupported command '%s'\n", buf); - return -EINVAL; + ret = -EINVAL; + goto out; } - return n; + ret = n; +out: + mutex_unlock(&udc_lock); + return ret; } static DEVICE_ATTR_WO(soft_connect); diff --git a/drivers/usb/gadget/udc/dummy_hcd.c b/drivers/usb/gadget/udc/dummy_hcd.c index ab5e978b5052..57067763b100 100644 --- a/drivers/usb/gadget/udc/dummy_hcd.c +++ b/drivers/usb/gadget/udc/dummy_hcd.c @@ -2118,9 +2118,21 @@ static int dummy_hub_control( dum_hcd->port_status &= ~USB_PORT_STAT_POWER; set_link_state(dum_hcd); break; - default: + case USB_PORT_FEAT_ENABLE: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + /* Not allowed for USB-3 */ + if (hcd->speed == HCD_USB3) + goto error; + fallthrough; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: dum_hcd->port_status &= ~(1 << wValue); set_link_state(dum_hcd); + break; + default: + /* Disallow INDICATOR and C_OVER_CURRENT */ + goto error; } break; case GetHubDescriptor: @@ -2258,17 +2270,20 @@ static int dummy_hub_control( } fallthrough; case USB_PORT_FEAT_RESET: + if (!(dum_hcd->port_status & USB_PORT_STAT_CONNECTION)) + break; /* if it's already enabled, disable */ if (hcd->speed == HCD_USB3) { - dum_hcd->port_status = 0; dum_hcd->port_status = (USB_SS_PORT_STAT_POWER | USB_PORT_STAT_CONNECTION | USB_PORT_STAT_RESET); - } else + } else { dum_hcd->port_status &= ~(USB_PORT_STAT_ENABLE | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); + dum_hcd->port_status |= USB_PORT_STAT_RESET; + } /* * We want to reset device status. All but the * Self powered feature @@ -2280,19 +2295,19 @@ static int dummy_hub_control( * interval? Is it still 50msec as for HS? */ dum_hcd->re_timeout = jiffies + msecs_to_jiffies(50); - fallthrough; - default: - if (hcd->speed == HCD_USB3) { - if ((dum_hcd->port_status & - USB_SS_PORT_STAT_POWER) != 0) { - dum_hcd->port_status |= (1 << wValue); - } - } else - if ((dum_hcd->port_status & - USB_PORT_STAT_POWER) != 0) { - dum_hcd->port_status |= (1 << wValue); - } set_link_state(dum_hcd); + break; + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + /* Not allowed for USB-3, and ignored for USB-2 */ + if (hcd->speed == HCD_USB3) + goto error; + break; + default: + /* Disallow TEST, INDICATOR, and C_OVER_CURRENT */ + goto error; } break; case GetPortErrorCount: diff --git a/drivers/usb/gadget/udc/fsl_mxc_udc.c b/drivers/usb/gadget/udc/fsl_mxc_udc.c deleted file mode 100644 index 5a321992decc..000000000000 --- a/drivers/usb/gadget/udc/fsl_mxc_udc.c +++ /dev/null @@ -1,122 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2009 - * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> - * - * Description: - * Helper routines for i.MX3x SoCs from Freescale, needed by the fsl_usb2_udc.c - * driver to function correctly on these systems. - */ -#include <linux/clk.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/fsl_devices.h> -#include <linux/mod_devicetable.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include "fsl_usb2_udc.h" - -static struct clk *mxc_ahb_clk; -static struct clk *mxc_per_clk; -static struct clk *mxc_ipg_clk; - -/* workaround ENGcm09152 for i.MX35 */ -#define MX35_USBPHYCTRL_OFFSET 0x600 -#define USBPHYCTRL_OTGBASE_OFFSET 0x8 -#define USBPHYCTRL_EVDO (1 << 23) - -int fsl_udc_clk_init(struct platform_device *pdev) -{ - struct fsl_usb2_platform_data *pdata; - unsigned long freq; - int ret; - - pdata = dev_get_platdata(&pdev->dev); - - mxc_ipg_clk = devm_clk_get(&pdev->dev, "ipg"); - if (IS_ERR(mxc_ipg_clk)) { - dev_err(&pdev->dev, "clk_get(\"ipg\") failed\n"); - return PTR_ERR(mxc_ipg_clk); - } - - mxc_ahb_clk = devm_clk_get(&pdev->dev, "ahb"); - if (IS_ERR(mxc_ahb_clk)) { - dev_err(&pdev->dev, "clk_get(\"ahb\") failed\n"); - return PTR_ERR(mxc_ahb_clk); - } - - mxc_per_clk = devm_clk_get(&pdev->dev, "per"); - if (IS_ERR(mxc_per_clk)) { - dev_err(&pdev->dev, "clk_get(\"per\") failed\n"); - return PTR_ERR(mxc_per_clk); - } - - clk_prepare_enable(mxc_ipg_clk); - clk_prepare_enable(mxc_ahb_clk); - clk_prepare_enable(mxc_per_clk); - - /* make sure USB_CLK is running at 60 MHz +/- 1000 Hz */ - if (!strcmp(pdev->id_entry->name, "imx-udc-mx27")) { - freq = clk_get_rate(mxc_per_clk); - if (pdata->phy_mode != FSL_USB2_PHY_ULPI && - (freq < 59999000 || freq > 60001000)) { - dev_err(&pdev->dev, "USB_CLK=%lu, should be 60MHz\n", freq); - ret = -EINVAL; - goto eclkrate; - } - } - - return 0; - -eclkrate: - clk_disable_unprepare(mxc_ipg_clk); - clk_disable_unprepare(mxc_ahb_clk); - clk_disable_unprepare(mxc_per_clk); - mxc_per_clk = NULL; - return ret; -} - -int fsl_udc_clk_finalize(struct platform_device *pdev) -{ - struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev); - int ret = 0; - - /* workaround ENGcm09152 for i.MX35 */ - if (pdata->workaround & FLS_USB2_WORKAROUND_ENGCM09152) { - unsigned int v; - struct resource *res = platform_get_resource - (pdev, IORESOURCE_MEM, 0); - void __iomem *phy_regs = ioremap(res->start + - MX35_USBPHYCTRL_OFFSET, 512); - if (!phy_regs) { - dev_err(&pdev->dev, "ioremap for phy address fails\n"); - ret = -EINVAL; - goto ioremap_err; - } - - v = readl(phy_regs + USBPHYCTRL_OTGBASE_OFFSET); - writel(v | USBPHYCTRL_EVDO, - phy_regs + USBPHYCTRL_OTGBASE_OFFSET); - - iounmap(phy_regs); - } - - -ioremap_err: - /* ULPI transceivers don't need usbpll */ - if (pdata->phy_mode == FSL_USB2_PHY_ULPI) { - clk_disable_unprepare(mxc_per_clk); - mxc_per_clk = NULL; - } - - return ret; -} - -void fsl_udc_clk_release(void) -{ - if (mxc_per_clk) - clk_disable_unprepare(mxc_per_clk); - clk_disable_unprepare(mxc_ahb_clk); - clk_disable_unprepare(mxc_ipg_clk); -} |