aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* ext4: remove unnecessary wbc parameter from ext4_bio_write_pageLei Chen2020-12-223-4/+3
| | | | | | | | | | | | | ext4_bio_write_page does not need wbc parameter, since its parameter io contains the io_wbc field. The io::io_wbc is initialized by ext4_io_submit_init which is called in ext4_writepages and ext4_writepage functions prior to ext4_bio_write_page. Therefor, when ext4_bio_write_page is called, wbc info has already been included in io parameter. Signed-off-by: Lei Chen <lennychen@tencent.com> Link: https://lore.kernel.org/r/1607669664-25656-1-git-send-email-lennychen@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: avoid s_mb_prefetch to be zero in individual scenariosChunguang Xu2020-12-221-4/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit cfd732377221 ("ext4: add prefetching for block allocation bitmaps") introduced block bitmap prefetch, and expects to read block bitmaps of flex_bg through an IO. However, it seems to ignore the value range of s_log_groups_per_flex. In the scenario where the value of s_log_groups_per_flex is greater than 27, s_mb_prefetch or s_mb_prefetch_limit will overflow, cause a divide zero exception. In addition, the logic of calculating nr is also flawed, because the size of flexbg is fixed during a single mount, but s_mb_prefetch can be modified, which causes nr to fail to meet the value condition of [1, flexbg_size]. To solve this problem, we need to set the upper limit of s_mb_prefetch. Since we expect to load block bitmaps of a flex_bg through an IO, we can consider determining a reasonable upper limit among the IO limit parameters. After consideration, we chose BLK_MAX_SEGMENT_SIZE. This is a good choice to solve divide zero problem and avoiding performance degradation. [ Some minor code simplifications to make the changes easy to follow -- TYT ] Reported-by: Tosk Robot <tencent_os_robot@tencent.com> Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Samuel Liao <samuelliao@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/1607051143-24508-1-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: defer saving error info from atomic contextJan Kara2020-12-222-37/+104
| | | | | | | | | | | | | | | | | | | | | | When filesystem inconsistency is detected with group locked, we currently try to modify superblock to store error there without blocking. However this can cause superblock checksum failures (or DIF/DIX failure) when the superblock is just being written out. Make error handling code just store error information in ext4_sb_info structure and copy it to on-disk superblock only in ext4_commit_super(). In case of error happening with group locked, we just postpone the superblock flushing to a workqueue. [ Added fixup so that s_first_error_* does not get updated after the file system is remounted. Also added fix for syzbot failure. - Ted ] Signed-off-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201127113405.26867-8-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: Hillf Danton <hdanton@sina.com> Reported-by: syzbot+9043030c040ce1849a60@syzkaller.appspotmail.com
* ext4: simplify ext4 error translationJan Kara2020-12-171-55/+40
| | | | | | | | | | | We convert errno's to ext4 on-disk format error codes in save_error_info(). Add a function and a bit of macro magic to make this simpler. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127113405.26867-7-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: move functions in super.cJan Kara2020-12-171-98/+98
| | | | | | | | | | | | Just move error info related functions in super.c close to ext4_handle_error(). We'll want to combine save_error_info() with ext4_handle_error() and this makes change more obvious and saves a forward declaration as well. No functional change. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127113405.26867-6-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: make ext4_abort() use __ext4_error()Jan Kara2020-12-174-82/+37
| | | | | | | | | | | The only difference between __ext4_abort() and __ext4_error() is that the former one ignores errors=continue mount option. Unify the code to reduce duplication. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127113405.26867-5-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: standardize error message in ext4_protect_reserved_inode()Jan Kara2020-12-171-6/+4
| | | | | | | | | | | We use __ext4_error() when ext4_protect_reserved_inode() finds filesystem corruption. However EXT4_ERROR_INODE_ERR() is perfectly capable of reporting all the needed information. So just use that. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127113405.26867-4-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: remove redundant sb checksum recomputationJan Kara2020-12-171-2/+0
| | | | | | | | | | | | Superblock is written out either through ext4_commit_super() or through ext4_handle_dirty_super(). In both cases we recompute the checksum so it is not necessary to recompute it after updating superblock free inodes & blocks counters. Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127113405.26867-3-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: don't remount read-only with errors=continue on rebootJan Kara2020-12-171-8/+6
| | | | | | | | | | | | ext4_handle_error() with errors=continue mount option can accidentally remount the filesystem read-only when the system is rebooting. Fix that. Fixes: 1dc1097ff60e ("ext4: avoid panic during forced reboot") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20201127113405.26867-2-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: fix deadlock with fs freezing and EA inodesJan Kara2020-12-171-5/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Xattr code using inodes with large xattr data can end up dropping last inode reference (and thus deleting the inode) from places like ext4_xattr_set_entry(). That function is called with transaction started and so ext4_evict_inode() can deadlock against fs freezing like: CPU1 CPU2 removexattr() freeze_super() vfs_removexattr() ext4_xattr_set() handle = ext4_journal_start() ... ext4_xattr_set_entry() iput(old_ea_inode) ext4_evict_inode(old_ea_inode) sb->s_writers.frozen = SB_FREEZE_FS; sb_wait_write(sb, SB_FREEZE_FS); ext4_freeze() jbd2_journal_lock_updates() -> blocks waiting for all handles to stop sb_start_intwrite() -> blocks as sb is already in SB_FREEZE_FS state Generally it is advisable to delete inodes from a separate transaction as it can consume quite some credits however in this case it would be quite clumsy and furthermore the credits for inode deletion are quite limited and already accounted for. So just tweak ext4_evict_inode() to avoid freeze protection if we have transaction already started and thus it is not really needed anyway. Cc: stable@vger.kernel.org Fixes: dec214d00e0d ("ext4: xattr inode deduplication") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/20201127110649.24730-1-jack@suse.cz Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* jbd2: add a helper to find out number of fast commit blocksHarshad Shirwadkar2020-12-172-7/+10
| | | | | | | | | | | | Add a helper to read number of fast commit blocks from jbd2 superblock and also rename the JBD2_MIN_FC_BLKS to JBD2_DEFAULT_FAST_COMMIT_BLOCKS since this constant is just the default number of fast commit blocks to use in case number of fast commit blocks isn't set in jbd2 superblock. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201120202232.2240293-2-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: make fast_commit.h byte identical with e2fsprogs/fast_commit.hHarshad Shirwadkar2020-12-172-55/+61
| | | | | | | | | | This patch makes fast_commit.h byte by byte identical with e2fsprogs/fast_commit.h. This will help us ensure that there are no on-disk format inconsistencies between e2fsck and kernel ext4. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201120202232.2240293-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: fix fall-through warnings for ClangGustavo A. R. Silva2020-12-171-0/+1
| | | | | | | | | | | In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of just letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Link: https://lore.kernel.org/r/03497331f088a938d7a728e7a689bd7953139429.1605896059.git.gustavoars@kernel.org Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: add docs about fast commit idempotenceHarshad Shirwadkar2020-12-172-0/+111
| | | | | | | | | | | | Fast commit on-disk format is designed such that the replay of these tags can be idempotent. This patch adds documentation in the code in form of comments and in form kernel docs that describes these characteristics. This patch also adds a TODO item needed to ensure kernel fast commit replay idempotence. Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com> Link: https://lore.kernel.org/r/20201119232822.1860882-1-harshadshirwadkar@gmail.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: remove the unused EXT4_CURRENT_REV macroKaixu Xia2020-12-171-1/+0
| | | | | | | | | There are no callers of the EXT4_CURRENT_REV macro, so remove it. Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/1605164202-31120-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: fix an IS_ERR() vs NULL checkDan Carpenter2020-12-171-2/+2
| | | | | | | | | | | | The ext4_find_extent() function never returns NULL, it returns error pointers. Fixes: 44059e503b03 ("ext4: fast commit recovery path") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/20201023112232.GB282278@mwanda Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
* ext4: check for invalid block size early when mounting a file systemTheodore Ts'o2020-12-171-24/+16
| | | | | | | | | | | | | | | | | | Check for valid block size directly by validating s_log_block_size; we were doing this in two places. First, by calculating blocksize via BLOCK_SIZE << s_log_block_size, and then checking that the blocksize was valid. And then secondly, by checking s_log_block_size directly. The first check is not reliable, and can trigger an UBSAN warning if s_log_block_size on a maliciously corrupted superblock is greater than 22. This is harmless, since the second test will correctly reject the maliciously fuzzed file system, but to make syzbot shut up, and because the two checks are duplicative in any case, delete the blocksize check, and move the s_log_block_size earlier in ext4_fill_super(). Signed-off-by: Theodore Ts'o <tytso@mit.edu> Reported-by: syzbot+345b75652b1d24227443@syzkaller.appspotmail.com
* ext4: fix a memory leak of ext4_free_dataChunguang Xu2020-12-171-0/+1
| | | | | | | | | | | | | | | | | | When freeing metadata, we will create an ext4_free_data and insert it into the pending free list. After the current transaction is committed, the object will be freed. ext4_mb_free_metadata() will check whether the area to be freed overlaps with the pending free list. If true, return directly. At this time, ext4_free_data is leaked. Fortunately, the probability of this problem is small, since it only occurs if the file system is corrupted such that a block is claimed by more one inode and those inodes are deleted within a single jbd2 transaction. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Link: https://lore.kernel.org/r/1604764698-4269-8-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@kernel.org
* ext4: delete nonsensical (commented-out) code inside ext4_xattr_block_set()Chunguang Xu2020-12-091-1/+0
| | | | | | | Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/1604764698-4269-7-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: update ext4_data_block_valid related commentsChunguang Xu2020-12-091-3/+3
| | | | | | | | | | Since ext4_data_block_valid() has been renamed to ext4_inode_block_valid(), the related comments need to be updated. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/1604764698-4269-5-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: simplify the code of mb_find_order_for_blockChunguang Xu2020-12-031-7/+3
| | | | | | | | | | The code of mb_find_order_for_block is a bit obscure, but we can simplify it with mb_find_buddy(), make the code more concise. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/1604764698-4269-3-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: remove redundant mb_regenerate_buddy()Chunguang Xu2020-12-031-19/+0
| | | | | | | | | | | | After this patch (163a203), if an abnormal bitmap is detected, we will mark the group as corrupt, and we will not use this group in the future. Therefore, it should be meaningless to regenerate the buddy bitmap of this group, It might be better to delete it. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/1604764698-4269-2-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: use ASSERT() to replace J_ASSERT()Chunguang Xu2020-12-037-18/+24
| | | | | | | | | | | | There are currently multiple forms of assertion, such as J_ASSERT(). J_ASEERT() is provided for the jbd module, which is a public module. Maybe we should use custom ASSERT() like other file systems, such as xfs, which would be better. Signed-off-by: Chunguang Xu <brookxu@tencent.com> Reviewed-by: Andreas Dilger <adilger@dilger.ca> Link: https://lore.kernel.org/r/1604764698-4269-1-git-send-email-brookxu@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: print quota journalling mode on (re-)mountRoman Anufriev2020-12-031-3/+20
| | | | | | | | | | | | | | | | | | | | Right now, it is hard to understand which quota journalling type is enabled: you need to be quite familiar with kernel code and trace it or really understand what different combinations of fs flags/mount options lead to. This patch adds printing of current quota jounalling mode on each mount/remount, thus making it easier to check it at a glance/in autotests. The semantics is similar to ext4 data journalling modes: * journalled - quota configured, journalling will be enabled * writeback - quota configured, journalling won't be enabled * none - quota isn't configured * disabled - kernel compiled without CONFIG_QUOTA feature Reviewed-by: Jan Kara <jack@suse.cz> Link: https://lore.kernel.org/r/1603336860-16153-2-git-send-email-dotdot@yandex-team.ru Signed-off-by: Roman Anufriev <dotdot@yandex-team.ru> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: add helpers for checking whether quota can be enabled/is journalledRoman Anufriev2020-12-033-10/+19
| | | | | | | | | | | | | | Right now, there are several places, where we check whether fs is capable of enabling quota or if quota is journalled with quite long and non-self-descriptive condition statements. This patch wraps these statements into helpers for better readability and easier usage. Link: https://lore.kernel.org/r/1603336860-16153-1-git-send-email-dotdot@yandex-team.ru Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Roman Anufriev <dotdot@yandex-team.ru> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: remove redundant assignment of variable exColin Ian King2020-12-031-1/+0
| | | | | | | | | | Variable ex is assigned a variable that is not being read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201021132326.148052-1-colin.king@canonical.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: remove the null check of bio_vec pageXianting Tian2020-12-031-3/+0
| | | | | | | | | | | bv_page can't be NULL in a valid bio_vec, so we can remove the NULL check, as we did in other places when calling bio_for_each_segment_all() to go through all bio_vec of a bio. Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Xianting Tian <tian.xianting@h3c.com> Link: https://lore.kernel.org/r/20201020082201.34257-1-tian.xianting@h3c.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* ext4: remove redundant operation that set bh to NULLKaixu Xia2020-12-031-2/+0
| | | | | | | | | | The out_fail branch path don't release the bh and the second bh is valid only in the for statement, so we don't need to set them to NULL. Signed-off-by: Kaixu Xia <kaixuxia@tencent.com> Reviewed-by: zhangyi (F) <yi.zhang@huawei.com> Link: https://lore.kernel.org/r/1603194069-17557-1-git-send-email-kaixuxia@tencent.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* Updated locking documentation for transaction_tAlexander Lochmann2020-12-031-2/+3
| | | | | | | | | | | | | We used LockDoc to derive locking rules for each member of struct transaction_t. Based on those results, we extended the existing documentation by more members of struct transaction_t, and updated the existing documentation. Link: https://lore.kernel.org/r/10cfbef1-994c-c604-f8a6-b1042fcc622f@tu-dortmund.de Signed-off-by: Alexander Lochmann <alexander.lochmann@tu-dortmund.de> Signed-off-by: Horst Schirmeier <horst.schirmeier@tu-dortmund.de> Signed-off-by: Theodore Ts'o <tytso@mit.edu>
* Linux 5.10-rc5Linus Torvalds2020-11-221-1/+1
|
* Merge branch 'for-linus' of ↵Linus Torvalds2020-11-2212-17/+223
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Jiri Kosina: - Various functionality / regression fixes for Logitech devices from Hans de Goede - Fix for (recently added) GPIO support in mcp2221 driver from Lars Povlsen - Power management handling fix/quirk in i2c-hid driver for certain BIOSes that have strange aproach to power-cycle from Hans de Goede - a few device ID additions and device-specific quirks * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiver HID: logitech-dj: Fix an error in mse_bluetooth_descriptor HID: Add Logitech Dinovo Edge battery quirk HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo Edge HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpad HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devices HID: mcp2221: Fix GPIO output handling HID: hid-sensor-hub: Fix issue with devices with no report ID HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdown HID: add support for Sega Saturn HID: cypress: Support Varmilo Keyboards' media hotkeys HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypresses HID: logitech-hidpp: Add PID for MX Anywhere 2 HID: uclogic: Add ID for Trust Flex Design Tablet
| * HID: logitech-dj: Fix Dinovo Mini when paired with a MX5x00 receiverHans de Goede2020-11-192-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some users are pairing the Dinovo keyboards with the MX5000 or MX5500 receivers, instead of with the Dinovo receivers. The receivers are mostly the same (and the air protocol obviously is compatible) but currently the Dinovo receivers are handled by hid-lg.c while the MX5x00 receivers are handled by logitech-dj.c. When using a Dinovo keyboard, with its builtin touchpad, through logitech-dj.c then the touchpad stops working because when asking the receiver for paired devices, we get only 1 paired device with a device_type of REPORT_TYPE_KEYBOARD. And since we don't see a paired mouse, we have nowhere to send mouse-events to, so we drop them. Extend the existing fix for the Dinovo Edge for this to also cover the Dinovo Mini keyboard and also add a mapping to logitech-hidpp for the Media key on the Dinovo Mini, so that that keeps working too. BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1811424 Fixes: f2113c3020ef ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
| * HID: logitech-dj: Fix an error in mse_bluetooth_descriptorHans de Goede2020-11-191-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix an error in the mouse / INPUT(2) descriptor used for quad/bt2.0 combo receivers. Replace INPUT with INPUT (Data,Var,Abs) for the field for the 4 extra buttons which share their report-byte with the low-res hwheel. This is likely a copy and paste error. I've verified that the new 0x81, 0x02 value matches both the mouse descriptor for the currently supported MX5000 / MX5500 receivers, as well as the INPUT(2) mouse descriptors for the Dinovo receivers for which support is being worked on. Cc: stable@vger.kernel.org Fixes: f2113c3020ef ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
| * HID: Add Logitech Dinovo Edge battery quirkHans de Goede2020-11-122-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | The battery status is also being reported by the logitech-hidpp driver, so ignore the standard HID battery status to avoid reporting the same info twice. Note the logitech-hidpp battery driver provides more info, such as properly differentiating between charging and discharging. Also the standard HID battery info seems to be wrong, reporting a capacity of just 26% after fully charging the device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
| * HID: logitech-hidpp: Add HIDPP_CONSUMER_VENDOR_KEYS quirk for the Dinovo EdgeHans de Goede2020-11-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Like the MX5000 and MX5500 quad/bluetooth keyboards the Dinovo Edge also needs the HIDPP_CONSUMER_VENDOR_KEYS quirk for some special keys to work. Specifically without this the "Phone" and the 'A' - 'D' Smart Keys do not send any events. In addition to fixing these keys not sending any events, adding the Bluetooth match, so that hid-logitech-hidpp is used instead of the generic HID driver, also adds battery monitoring support when the keyboard is connected over Bluetooth. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
| * HID: logitech-dj: Handle quad/bluetooth keyboards with a builtin trackpadHans de Goede2020-11-121-0/+19
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some quad/bluetooth keyboards, such as the Dinovo Edge (Y-RAY81) have a builtin touchpad. In this case when asking the receiver for paired devices, we get only 1 paired device with a device_type of REPORT_TYPE_KEYBOARD. This means that we do not instantiate a second dj_hiddev for the mouse (as we normally would) and thus there is no place for us to forward the mouse input reports to, causing the touchpad part of the keyboard to not work. There is no way for us to detect these keyboards, so this commit adds an array with device-ids for such keyboards and when a keyboard is on this list it adds STD_MOUSE to the reports_supported bitmap for the dj_hiddev created for the keyboard fixing the touchpad not working. Using a list of device-ids for this is not ideal, but there are only very few such keyboards so this should be fine. Besides the Dinovo Edge, other known wireless Logitech keyboards with a builtin touchpad are: * Dinovo Mini (TODO add its device-id to the list) * K400 (uses a unifying receiver so is not affected) * K600 (uses a unifying receiver so is not affected) Cc: stable@vger.kernel.org BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1811424 Fixes: f2113c3020ef ("HID: logitech-dj: add support for Logitech Bluetooth Mini-Receiver") Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
| * HID: add HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE for Gamevice devicesChris Ye2020-11-092-0/+8
| | | | | | | | | | | | | | | | Kernel 5.4 introduces HID_QUIRK_INCREMENT_USAGE_ON_DUPLICATE, devices need to be set explicitly with this flag. Signed-off-by: Chris Ye <lzye@google.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: mcp2221: Fix GPIO output handlingLars Povlsen2020-11-051-9/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The mcp2221 driver GPIO output handling has has several issues. * A wrong value is used for the GPIO direction. * Wrong offsets are calculated for some GPIO set value/set direction operations, when offset is larger than 0. This has been fixed by introducing proper manifest constants for the direction encoding, and using 'offsetof' when calculating GPIO register offsets. The updated driver has been tested with the Sparx5 pcb134/pcb135 board, which has the mcp2221 device with several (output) GPIO's. Fixes: 328de1c519c5c092 ("HID: mcp2221: add GPIO functionality support") Reviewed-by: Rishi Gupta <gupt21@gmail.com> Signed-off-by: Lars Povlsen <lars.povlsen@microchip.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: hid-sensor-hub: Fix issue with devices with no report IDPablo Ceballos2020-11-051-1/+2
| | | | | | | | | | | | | | | | | | | | | | Some HID devices don't use a report ID because they only have a single report. In those cases, the report ID in struct hid_report will be zero and the data for the report will start at the first byte, so don't skip over the first byte. Signed-off-by: Pablo Ceballos <pceballos@google.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: i2c-hid: Put ACPI enumerated devices in D3 on shutdownHans de Goede2020-10-291-0/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The i2c-hid driver would quietly fail to probe the i2c-hid sensor-hub with an ACPI device-id of SMO91D0 every other boot. Specifically, the i2c_smbus_read_byte() "Make sure there is something at this address" check would fail every other boot. It seems that the BIOS does not properly reset/power-cycle the device leaving it in a confused state where it refuses to respond to i2c-xfers. On boots where probing the device failed, the driver-core puts the device in D3 after the probe-failure, which causes the probe to succeed the next boot. Putting the device in D3 from the shutdown-handler fixes the sensors not working every other boot. This has been tested on both a Lenovo Miix 2-10 and a Dell Venue 8 Pro 5830 both of which use an i2c-hid sensor-hub with an ACPI id of SMO91D0. Note that it is safe to call acpi_device_set_power() with a NULL pointer as first argument, so on none ACPI enumerated devices this change is a no-op. Cc: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: add support for Sega SaturnJiri Kosina2020-10-232-0/+2
| | | | | | | | | | | | | | | | This device needs HID_QUIRK_MULTI_INPUT in order to be presented to userspace in a consistent way. Reported-and-tested-by: David Gámiz Jiménez <david.gamiz@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: cypress: Support Varmilo Keyboards' media hotkeysFrank Yang2020-10-232-5/+41
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Varmilo VA104M Keyboard (04b4:07b1, reported as Varmilo Z104M) exposes media control hotkeys as a USB HID consumer control device, but these keys do not work in the current (5.8-rc1) kernel due to the incorrect HID report descriptor. Fix the problem by modifying the internal HID report descriptor. More specifically, the keyboard report descriptor specifies the logical boundary as 572~10754 (0x023c ~ 0x2a02) while the usage boundary is specified as 0~10754 (0x00 ~ 0x2a02). This results in an incorrect interpretation of input reports, causing inputs to be ignored. By setting the Logical Minimum to zero, we align the logical boundary with the Usage ID boundary. Some notes: * There seem to be multiple variants of the VA104M keyboard. This patch specifically targets 04b4:07b1 variant. * The device works out-of-the-box on Windows platform with the generic consumer control device driver (hidserv.inf). This suggests that Windows either ignores the Logical Minimum/Logical Maximum or interprets the Usage ID assignment differently from the linux implementation; Maybe there are other devices out there that only works on Windows due to this problem? Signed-off-by: Frank Yang <puilp0502@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: ite: Replace ABS_MISC 120/121 events with touchpad on/off keypressesHans de Goede2020-10-221-1/+60
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The usb-hid keyboard-dock for the Acer Switch 10 SW5-012 model declares an application and hid-usage page of 0x0088 for the INPUT(4) report which it sends. This reports contains 2 8-bit fields which are declared as HID_MAIN_ITEM_VARIABLE. The keyboard-touchpad combo never actually generates this report, except when the touchpad is toggled on/off with the Fn + F7 hotkey combo. The toggle on/off is handled inside the keyboard-dock, when the touchpad is toggled off it simply stops sending events. When the touchpad is toggled on/off an INPUT(4) report is generated with the first content byte set to 120/121, before this commit the kernel would report this as ABS_MISC 120/121 events. Patch the descriptor to replace the HID_MAIN_ITEM_VARIABLE with HID_MAIN_ITEM_RELATIVE (because no key-presss release events are send) and add mappings for the 0x00880078 and 0x00880079 usages to generate touchpad on/off key events when the touchpad is toggled on/off. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: logitech-hidpp: Add PID for MX Anywhere 2Harry Cutts2020-10-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | It seems that the PID 0x4072 was missing from the list Logitech gave me for this mouse, as I found one with it in the wild (with which I tested this patch). Fixes: 4435ff2f09a2 ("HID: logitech: Enable high-resolution scrolling on Logitech mice") Signed-off-by: Harry Cutts <hcutts@chromium.org> Acked-by: Peter Hutterer <peter.hutterer@who-t.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
| * HID: uclogic: Add ID for Trust Flex Design TabletMartijn van de Streek2020-10-223-0/+5
| | | | | | | | | | | | | | | | | | The Trust Flex Design Tablet has an UGTizer USB ID and requires the same initialization as the UGTizer GP0610 to be detected as a graphics tablet instead of a mouse. Signed-off-by: Martijn van de Streek <martijn@zeewinde.xyz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* | Merge tag 'sched-urgent-2020-11-22' of ↵Linus Torvalds2020-11-224-57/+95
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Thomas Gleixner: "A couple of scheduler fixes: - Make the conditional update of the overutilized state work correctly by caching the relevant flags state before overwriting them and checking them afterwards. - Fix a data race in the wakeup path which caused loadavg on ARM64 platforms to become a random number generator. - Fix the ordering of the iowaiter accounting operations so it can't be decremented before it is incremented. - Fix a bug in the deadline scheduler vs. priority inheritance when a non-deadline task A has inherited the parameters of a deadline task B and then blocks on a non-deadline task C. The second inheritance step used the static deadline parameters of task A, which are usually 0, instead of further propagating task B's parameters. The zero initialized parameters trigger a bug in the deadline scheduler" * tag 'sched-urgent-2020-11-22' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/deadline: Fix priority inheritance with multiple scheduling classes sched: Fix rq->nr_iowait ordering sched: Fix data-race in wakeup sched/fair: Fix overutilized update in enqueue_task_fair()
| * | sched/deadline: Fix priority inheritance with multiple scheduling classesJuri Lelli2020-11-173-50/+68
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Glenn reported that "an application [he developed produces] a BUG in deadline.c when a SCHED_DEADLINE task contends with CFS tasks on nested PTHREAD_PRIO_INHERIT mutexes. I believe the bug is triggered when a CFS task that was boosted by a SCHED_DEADLINE task boosts another CFS task (nested priority inheritance). ------------[ cut here ]------------ kernel BUG at kernel/sched/deadline.c:1462! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 12 PID: 19171 Comm: dl_boost_bug Tainted: ... Hardware name: ... RIP: 0010:enqueue_task_dl+0x335/0x910 Code: ... RSP: 0018:ffffc9000c2bbc68 EFLAGS: 00010002 RAX: 0000000000000009 RBX: ffff888c0af94c00 RCX: ffffffff81e12500 RDX: 000000000000002e RSI: ffff888c0af94c00 RDI: ffff888c10b22600 RBP: ffffc9000c2bbd08 R08: 0000000000000009 R09: 0000000000000078 R10: ffffffff81e12440 R11: ffffffff81e1236c R12: ffff888bc8932600 R13: ffff888c0af94eb8 R14: ffff888c10b22600 R15: ffff888bc8932600 FS: 00007fa58ac55700(0000) GS:ffff888c10b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa58b523230 CR3: 0000000bf44ab003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: ? intel_pstate_update_util_hwp+0x13/0x170 rt_mutex_setprio+0x1cc/0x4b0 task_blocks_on_rt_mutex+0x225/0x260 rt_spin_lock_slowlock_locked+0xab/0x2d0 rt_spin_lock_slowlock+0x50/0x80 hrtimer_grab_expiry_lock+0x20/0x30 hrtimer_cancel+0x13/0x30 do_nanosleep+0xa0/0x150 hrtimer_nanosleep+0xe1/0x230 ? __hrtimer_init_sleeper+0x60/0x60 __x64_sys_nanosleep+0x8d/0xa0 do_syscall_64+0x4a/0x100 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fa58b52330d ... ---[ end trace 0000000000000002 ]— He also provided a simple reproducer creating the situation below: So the execution order of locking steps are the following (N1 and N2 are non-deadline tasks. D1 is a deadline task. M1 and M2 are mutexes that are enabled * with priority inheritance.) Time moves forward as this timeline goes down: N1 N2 D1 | | | | | | Lock(M1) | | | | | | Lock(M2) | | | | | | Lock(M2) | | | | Lock(M1) | | (!!bug triggered!) | Daniel reported a similar situation as well, by just letting ksoftirqd run with DEADLINE (and eventually block on a mutex). Problem is that boosted entities (Priority Inheritance) use static DEADLINE parameters of the top priority waiter. However, there might be cases where top waiter could be a non-DEADLINE entity that is currently boosted by a DEADLINE entity from a different lock chain (i.e., nested priority chains involving entities of non-DEADLINE classes). In this case, top waiter static DEADLINE parameters could be null (initialized to 0 at fork()) and replenish_dl_entity() would hit a BUG(). Fix this by keeping track of the original donor and using its parameters when a task is boosted. Reported-by: Glenn Elliott <glenn@aurora.tech> Reported-by: Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by: Juri Lelli <juri.lelli@redhat.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Tested-by: Daniel Bristot de Oliveira <bristot@redhat.com> Link: https://lkml.kernel.org/r/20201117061432.517340-1-juri.lelli@redhat.com
| * | sched: Fix rq->nr_iowait orderingPeter Zijlstra2020-11-171-5/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | schedule() ttwu() deactivate_task(); if (p->on_rq && ...) // false atomic_dec(&task_rq(p)->nr_iowait); if (prev->in_iowait) atomic_inc(&rq->nr_iowait); Allows nr_iowait to be decremented before it gets incremented, resulting in more dodgy IO-wait numbers than usual. Note that because we can now do ttwu_queue_wakelist() before p->on_cpu==0, we lose the natural ordering and have to further delay the decrement. Fixes: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") Reported-by: Tejun Heo <tj@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Link: https://lkml.kernel.org/r/20201117093829.GD3121429@hirez.programming.kicks-ass.net
| * | sched: Fix data-race in wakeupPeter Zijlstra2020-11-171-1/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Mel reported that on some ARM64 platforms loadavg goes bananas and Will tracked it down to the following race: CPU0 CPU1 schedule() prev->sched_contributes_to_load = X; deactivate_task(prev); try_to_wake_up() if (p->on_rq &&) // false if (smp_load_acquire(&p->on_cpu) && // true ttwu_queue_wakelist()) p->sched_remote_wakeup = Y; smp_store_release(prev->on_cpu, 0); where both p->sched_contributes_to_load and p->sched_remote_wakeup are in the same word, and thus the stores X and Y race (and can clobber one another's data). Whereas prior to commit c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") the p->on_cpu handoff serialized access to p->sched_remote_wakeup (just as it still does with p->sched_contributes_to_load) that commit broke that by calling ttwu_queue_wakelist() with p->on_cpu != 0. However, due to p->XXX = X ttwu() schedule() if (p->on_rq && ...) // false smp_mb__after_spinlock() if (smp_load_acquire(&p->on_cpu) && deactivate_task() ttwu_queue_wakelist()) p->on_rq = 0; p->sched_remote_wakeup = Y; We can be sure any 'current' store is complete and 'current' is guaranteed asleep. Therefore we can move p->sched_remote_wakeup into the current flags word. Note: while the observed failure was loadavg accounting gone wrong due to ttwu() cobbering p->sched_contributes_to_load, the reverse problem is also possible where schedule() clobbers p->sched_remote_wakeup, this could result in enqueue_entity() wrecking ->vruntime and causing scheduling artifacts. Fixes: c6e7bd7afaeb ("sched/core: Optimize ttwu() spinning on p->on_cpu") Reported-by: Mel Gorman <mgorman@techsingularity.net> Debugged-by: Will Deacon <will@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20201117083016.GK3121392@hirez.programming.kicks-ass.net
| * | sched/fair: Fix overutilized update in enqueue_task_fair()Quentin Perret2020-11-171-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | enqueue_task_fair() attempts to skip the overutilized update for new tasks as their util_avg is not accurate yet. However, the flag we check to do so is overwritten earlier on in the function, which makes the condition pretty much a nop. Fix this by saving the flag early on. Fixes: 2802bf3cd936 ("sched/fair: Add over-utilization/tipping point indicator") Reported-by: Rick Yiu <rickyiu@google.com> Signed-off-by: Quentin Perret <qperret@google.com> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: Vincent Guittot <vincent.guittot@linaro.org> Reviewed-by: Valentin Schneider <valentin.schneider@arm.com> Link: https://lkml.kernel.org/r/20201112111201.2081902-1-qperret@google.com
generated by cgit (git 2.34.1) at 2025-02-25 20:01:12 +0000