aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* netlink: Relax attr validation for fixed length typesDavid Ahern2017-12-071-6/+16
| | | | | | | | | | | | | | | | | | | Commit 28033ae4e0f5 ("net: netlink: Update attr validation to require exact length for some types") requires attributes using types NLA_U* and NLA_S* to have an exact length. This change is exposing bugs in various userspace commands that are sending attributes with an invalid length (e.g., attribute has type NLA_U8 and userspace sends NLA_U32). While the commands are clearly broken and need to be fixed, users are arguing that the sudden change in enforcement is breaking older commands on newer kernels for use cases that otherwise "worked". Relax the validation to print a warning mesage similar to what is done for messages containing extra bytes after parsing. Fixes: 28033ae4e0f5 ("net: netlink: Update attr validation to require exact length for some types") Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* adding missing rcu_read_unlock in ipxip6_rcvNikita V. Shirokov2017-12-071-1/+1
| | | | | | | | | | | | | | | commit 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") introduced new exit point in ipxip6_rcv. however rcu_read_unlock is missing there. this diff is fixing this v1->v2: instead of doing rcu_read_unlock in place, we are going to "drop" section (to prevent skb leakage) Fixes: 8d79266bc48c ("ip6_tunnel: add collect_md mode to IPv6 tunnels") Signed-off-by: Nikita V. Shirokov <tehnerd@fb.com> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'mv88e6xxx-error-patch-fixes'David S. Miller2017-12-071-16/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Andrew Lunn says: ==================== mv88e6xxx error patch fixes While trying to bring up a new PHY on a board, i exercised the error paths a bit, and discovered some bugs. The unwind for interrupt handling deadlocks, and the MDIO code hits a BUG() when a registered MDIO device is freed without first being unregistered. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: dsa: mv88e6xxx: Unregister MDIO bus on error pathAndrew Lunn2017-12-071-14/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | The MDIO busses need to be unregistered before they are freed, otherwise BUG() is called. Add a call to the unregister code if the registration fails, since we can have multiple busses, of which some may correctly register before one fails. This requires moving the code around a little. Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: dsa: mv88e6xxx: Fix interrupt masking on removalAndrew Lunn2017-12-071-2/+2
|/ | | | | | | | | | | | | | | | | When removing the interrupt handling code, we should mask the generation of interrupts. The code however unmasked all interrupts. This can then cause a new interrupt. We then get into a deadlock where the interrupt thread is waiting to run, and the code continues, trying to remove the interrupt handler, which means waiting for the thread to complete. On a UP machine this deadlocks. Fix so we really mask interrupts in the hardware. The same error is made in the error path when install the interrupt handling code. Fixes: 3460a5770ce9 ("net: dsa: mv88e6xxx: Mask g1 interrupts and free interrupt") Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: ethernet: arc: fix error handling in emac_rockchip_probeBranislav Radocaj2017-12-071-2/+5
| | | | | | | | If clk_set_rate() fails, we should disable clk before return. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Branislav Radocaj <branislav@radocaj.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: mvmdio: disable/unprepare clocks in EPROBE_DEFER caseTobias Jordan2017-12-071-1/+2
| | | | | | | | | | | | add appropriate calls to clk_disable_unprepare() by jumping to out_mdio in case orion_mdio_probe() returns -EPROBE_DEFER. Found by Linux Driver Verification project (linuxtesting.org). Fixes: 3d604da1e954 ("net: mvmdio: get and enable optional clock") Signed-off-by: Tobias Jordan <Tobias.Jordan@elektrobit.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* drivers: net: dsa: remove duplicate includesPravin Shedge2017-12-061-1/+0
| | | | | | | | | These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
* rds: Fix NULL pointer dereference in __rds_rdma_mapHåkon Bugge2017-12-061-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This is a fix for syzkaller719569, where memory registration was attempted without any underlying transport being loaded. Analysis of the case reveals that it is the setsockopt() RDS_GET_MR (2) and RDS_GET_MR_FOR_DEST (7) that are vulnerable. Here is an example stack trace when the bug is hit: BUG: unable to handle kernel NULL pointer dereference at 00000000000000c0 IP: __rds_rdma_map+0x36/0x440 [rds] PGD 2f93d03067 P4D 2f93d03067 PUD 2f93d02067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: bridge stp llc tun rpcsec_gss_krb5 nfsv4 dns_resolver nfs fscache rds binfmt_misc sb_edac intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul c rc32_pclmul ghash_clmulni_intel pcbc aesni_intel crypto_simd glue_helper cryptd iTCO_wdt mei_me sg iTCO_vendor_support ipmi_si mei ipmi_devintf nfsd shpchp pcspkr i2c_i801 ioatd ma ipmi_msghandler wmi lpc_ich mfd_core auth_rpcgss nfs_acl lockd grace sunrpc ip_tables ext4 mbcache jbd2 mgag200 i2c_algo_bit drm_kms_helper ixgbe syscopyarea ahci sysfillrect sysimgblt libahci mdio fb_sys_fops ttm ptp libata sd_mod mlx4_core drm crc32c_intel pps_core megaraid_sas i2c_core dca dm_mirror dm_region_hash dm_log dm_mod CPU: 48 PID: 45787 Comm: repro_set2 Not tainted 4.14.2-3.el7uek.x86_64 #2 Hardware name: Oracle Corporation ORACLE SERVER X5-2L/ASM,MOBO TRAY,2U, BIOS 31110000 03/03/2017 task: ffff882f9190db00 task.stack: ffffc9002b994000 RIP: 0010:__rds_rdma_map+0x36/0x440 [rds] RSP: 0018:ffffc9002b997df0 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff882fa2182580 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffc9002b997e40 RDI: ffff882fa2182580 RBP: ffffc9002b997e30 R08: 0000000000000000 R09: 0000000000000002 R10: ffff885fb29e3838 R11: 0000000000000000 R12: ffff882fa2182580 R13: ffff882fa2182580 R14: 0000000000000002 R15: 0000000020000ffc FS: 00007fbffa20b700(0000) GS:ffff882fbfb80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000c0 CR3: 0000002f98a66006 CR4: 00000000001606e0 Call Trace: rds_get_mr+0x56/0x80 [rds] rds_setsockopt+0x172/0x340 [rds] ? __fget_light+0x25/0x60 ? __fdget+0x13/0x20 SyS_setsockopt+0x80/0xe0 do_syscall_64+0x67/0x1b0 entry_SYSCALL64_slow_path+0x25/0x25 RIP: 0033:0x7fbff9b117f9 RSP: 002b:00007fbffa20aed8 EFLAGS: 00000293 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000000c84a4 RCX: 00007fbff9b117f9 RDX: 0000000000000002 RSI: 0000400000000114 RDI: 000000000000109b RBP: 00007fbffa20af10 R08: 0000000000000020 R09: 00007fbff9dd7860 R10: 0000000020000ffc R11: 0000000000000293 R12: 0000000000000000 R13: 00007fbffa20b9c0 R14: 00007fbffa20b700 R15: 0000000000000021 Code: 41 56 41 55 49 89 fd 41 54 53 48 83 ec 18 8b 87 f0 02 00 00 48 89 55 d0 48 89 4d c8 85 c0 0f 84 2d 03 00 00 48 8b 87 00 03 00 00 <48> 83 b8 c0 00 00 00 00 0f 84 25 03 00 0 0 48 8b 06 48 8b 56 08 The fix is to check the existence of an underlying transport in __rds_rdma_map(). Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net_sched: use macvlan real dev trans_start in dev_trans_start()Chris Dion2017-12-061-0/+3
| | | | | | | | | Macvlan devices are similar to vlans and do not update their own trans_start. In order for arp monitoring to work for a bond device when the slaves are macvlans, obtain its real device. Signed-off-by: Chris Dion <christopher.dion@dell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* xen-netback: Fix logging message with spurious period after newlineJoe Perches2017-12-061-1/+1
| | | | | | | | Using a period after a newline causes bad output. Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Paul Durrant <paul.durrant@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: thunderx: Fix TCP/UDP checksum offload for IPv4 pktsFlorian Westphal2017-12-061-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | Offload IP header checksum to NIC. This fixes a previous patch which disabled checksum offloading for both IPv4 and IPv6 packets. So L3 checksum offload was getting disabled for IPv4 pkts. And HW is dropping these pkts for some reason. Without this patch, IPv4 TSO appears to be broken: WIthout this patch I get ~16kbyte/s, with patch close to 2mbyte/s when copying files via scp from test box to my home workstation. Looking at tcpdump on sender it looks like hardware drops IPv4 TSO skbs. This patch restores performance for me, ipv6 looks good too. Fixes: fa6d7cb5d76c ("net: thunderx: Fix TCP/UDP checksum offload for IPv6 pkts") Cc: Sunil Goutham <sgoutham@cavium.com> Cc: Aleksey Makarov <aleksey.makarov@auriga.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
* make sock_alloc_file() do sock_release() on failuresAl Viro2017-12-055-31/+11
| | | | | | | | | | | | This changes calling conventions (and simplifies the hell out the callers). New rules: once struct socket had been passed to sock_alloc_file(), it's been consumed either by struct file or by sock_release() done by sock_alloc_file(). Either way the caller should not do sock_release() after that point. Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* socketpair(): allocate descriptors firstAl Viro2017-12-051-51/+38
| | | | | | | | simplifies failure exits considerably... Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* fix kcm_clone()Al Viro2017-12-051-44/+27
| | | | | | | | | | | | | | | 1) it's fput() or sock_release(), not both 2) don't do fd_install() until the last failure exit. 3) not a bug per se, but... don't attach socket to struct file until it's set up. Take reserving descriptor into the caller, move fd_install() to the caller, sanitize failure exits and calling conventions. Cc: stable@vger.kernel.org # v4.6+ Acked-by: Tom Herbert <tom@herbertland.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
* dccp: CVE-2017-8824: use-after-free in DCCP codeMohamed Ghannam2017-12-051-0/+5
| | | | | | | | | | Whenever the sock object is in DCCP_CLOSED state, dccp_disconnect() must free dccps_hc_tx_ccid and dccps_hc_rx_ccid and set to NULL. Signed-off-by: Mohamed Ghannam <simo.ghannam@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: remove hlist_nulls_add_tail_rcu()Eric Dumazet2017-12-052-43/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Alexander Potapenko reported use of uninitialized memory [1] This happens when inserting a request socket into TCP ehash, in __sk_nulls_add_node_rcu(), since sk_reuseport is not initialized. Bug was added by commit d894ba18d4e4 ("soreuseport: fix ordering for mixed v4/v6 sockets") Note that d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix") missed the opportunity to get rid of hlist_nulls_add_tail_rcu() : Both UDP sockets and TCP/DCCP listeners no longer use __sk_nulls_add_node_rcu() for their hash insertion. Since all other sockets have unique 4-tuple, the reuseport status has no special meaning, so we can always use hlist_nulls_add_head_rcu() for them and save few cycles/instructions. [1] ================================================================== BUG: KMSAN: use of uninitialized memory in inet_ehash_insert+0xd40/0x1050 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.13.0+ #3288 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace:  <IRQ>  __dump_stack lib/dump_stack.c:16  dump_stack+0x185/0x1d0 lib/dump_stack.c:52  kmsan_report+0x13f/0x1c0 mm/kmsan/kmsan.c:1016  __msan_warning_32+0x69/0xb0 mm/kmsan/kmsan_instr.c:766  __sk_nulls_add_node_rcu ./include/net/sock.h:684  inet_ehash_insert+0xd40/0x1050 net/ipv4/inet_hashtables.c:413  reqsk_queue_hash_req net/ipv4/inet_connection_sock.c:754  inet_csk_reqsk_queue_hash_add+0x1cc/0x300 net/ipv4/inet_connection_sock.c:765  tcp_conn_request+0x31e7/0x36f0 net/ipv4/tcp_input.c:6414  tcp_v4_conn_request+0x16d/0x220 net/ipv4/tcp_ipv4.c:1314  tcp_rcv_state_process+0x42a/0x7210 net/ipv4/tcp_input.c:5917  tcp_v4_do_rcv+0xa6a/0xcd0 net/ipv4/tcp_ipv4.c:1483  tcp_v4_rcv+0x3de0/0x4ab0 net/ipv4/tcp_ipv4.c:1763  ip_local_deliver_finish+0x6bb/0xcb0 net/ipv4/ip_input.c:216  NF_HOOK ./include/linux/netfilter.h:248  ip_local_deliver+0x3fa/0x480 net/ipv4/ip_input.c:257  dst_input ./include/net/dst.h:477  ip_rcv_finish+0x6fb/0x1540 net/ipv4/ip_input.c:397  NF_HOOK ./include/linux/netfilter.h:248  ip_rcv+0x10f6/0x15c0 net/ipv4/ip_input.c:488  __netif_receive_skb_core+0x36f6/0x3f60 net/core/dev.c:4298  __netif_receive_skb net/core/dev.c:4336  netif_receive_skb_internal+0x63c/0x19c0 net/core/dev.c:4497  napi_skb_finish net/core/dev.c:4858  napi_gro_receive+0x629/0xa50 net/core/dev.c:4889  e1000_receive_skb drivers/net/ethernet/intel/e1000/e1000_main.c:4018  e1000_clean_rx_irq+0x1492/0x1d30 drivers/net/ethernet/intel/e1000/e1000_main.c:4474  e1000_clean+0x43aa/0x5970 drivers/net/ethernet/intel/e1000/e1000_main.c:3819  napi_poll net/core/dev.c:5500  net_rx_action+0x73c/0x1820 net/core/dev.c:5566  __do_softirq+0x4b4/0x8dd kernel/softirq.c:284  invoke_softirq kernel/softirq.c:364  irq_exit+0x203/0x240 kernel/softirq.c:405  exiting_irq+0xe/0x10 ./arch/x86/include/asm/apic.h:638  do_IRQ+0x15e/0x1a0 arch/x86/kernel/irq.c:263  common_interrupt+0x86/0x86 Fixes: d894ba18d4e4 ("soreuseport: fix ordering for mixed v4/v6 sockets") Fixes: d296ba60d8e2 ("soreuseport: Resolve merge conflict for v4/v6 ordering fix") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Alexander Potapenko <glider@google.com> Acked-by: Craig Gallek <kraig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'rmnet-Fix-leaks-in-failure-scenarios'David S. Miller2017-12-052-2/+7
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Subash Abhinov Kasiviswanathan says: ==================== net: qualcomm: rmnet: Fix leaks in failure scenarios Patch 1 fixes a leak in transmit path where a skb cannot be transmitted due to insufficient headroom to stamp the map header. Patch 2 fixes a leak in rmnet_newlink() failure because the rmnet endpoint was never freed ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qualcomm: rmnet: Fix leak in device creation failureSubash Abhinov Kasiviswanathan2017-12-051-0/+1
| | | | | | | | | | | | | | | | | | | | If the rmnet device creation fails in the newlink either while registering with the physical device or after subsequent operations, the rmnet endpoint information is never freed. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: qualcomm: rmnet: Fix leak on transmit failureSubash Abhinov Kasiviswanathan2017-12-051-2/+6
|/ | | | | | | | | If a skb in transmit path does not have sufficient headroom to add the map header, the skb is not sent out and is never freed. Fixes: ceed73a2cf4a ("drivers: net: ethernet: qualcomm: rmnet: Initial implementation") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* VSOCK: fix outdated sk_state value in hvs_release()Stefan Hajnoczi2017-12-051-1/+1
| | | | | | | | | | | | | | | | | | | Since commit 3b4477d2dcf2709d0be89e2a8dced3d0f4a017f2 ("VSOCK: use TCP state constants for sk_state") VSOCK has used TCP_* constants for sk_state. Commit b4562ca7925a3bedada87a3dd072dd5bad043288 ("hv_sock: add locking in the open/close/release code paths") reintroduced the SS_DISCONNECTING constant. This patch replaces the old SS_DISCONNECTING with the new TCP_CLOSING constant. CC: Dexuan Cui <decui@microsoft.com> CC: Cathy Avery <cavery@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Jorgen Hansen <jhansen@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: fix memory leak in tipc_accept_from_sock()Jon Maloy2017-12-051-0/+1
| | | | | | | | | | | | When the function tipc_accept_from_sock() fails to create an instance of struct tipc_subscriber it omits to free the already created instance of struct tipc_conn instance before it returns. We fix that with this commit. Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* tipc: fix a null pointer deref on error pathCong Wang2017-12-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In tipc_topsrv_kern_subscr() when s->tipc_conn_new() fails we call tipc_close_conn() to clean up, but in this case calling conn_put() is just enough. This fixes the folllowing crash: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 3085 Comm: syzkaller064164 Not tainted 4.15.0-rc1+ #137 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: 00000000c24413a5 task.stack: 000000005e8160b5 RIP: 0010:__lock_acquire+0xd55/0x47f0 kernel/locking/lockdep.c:3378 RSP: 0018:ffff8801cb5474a8 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000004 RSI: 0000000000000000 RDI: ffffffff85ecb400 RBP: ffff8801cb547830 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: ffffffff87489d60 R12: ffff8801cd2980c0 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000020 FS: 00000000014ee880(0000) GS:ffff8801db400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffee2426e40 CR3: 00000001cb85a000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: lock_acquire+0x1d5/0x580 kernel/locking/lockdep.c:4004 __raw_spin_lock_bh include/linux/spinlock_api_smp.h:135 [inline] _raw_spin_lock_bh+0x31/0x40 kernel/locking/spinlock.c:175 spin_lock_bh include/linux/spinlock.h:320 [inline] tipc_subscrb_subscrp_delete+0x8f/0x470 net/tipc/subscr.c:201 tipc_subscrb_delete net/tipc/subscr.c:238 [inline] tipc_subscrb_release_cb+0x17/0x30 net/tipc/subscr.c:316 tipc_close_conn+0x171/0x270 net/tipc/server.c:204 tipc_topsrv_kern_subscr+0x724/0x810 net/tipc/server.c:514 tipc_group_create+0x702/0x9c0 net/tipc/group.c:184 tipc_sk_join net/tipc/socket.c:2747 [inline] tipc_setsockopt+0x249/0xc10 net/tipc/socket.c:2861 SYSC_setsockopt net/socket.c:1851 [inline] SyS_setsockopt+0x189/0x360 net/socket.c:1830 entry_SYSCALL_64_fastpath+0x1f/0x96 Fixes: 14c04493cb77 ("tipc: add ability to order and receive topology events in driver") Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jon Maloy <jon.maloy@ericsson.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'sh_eth-dma-mapping-fixes'David S. Miller2017-12-051-15/+16
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | Thomas Petazzoni says: ==================== net: sh_eth: DMA mapping API fixes Here are two patches that fix how the sh_eth driver is using the DMA mapping API: a bogus struct device is used in some places, or a NULL struct device is used. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sh_eth: don't use NULL as "struct device" for the DMA mapping APIThomas Petazzoni2017-12-051-6/+6
| | | | | | | | | | | | | | | | | | | | | | | | Using NULL as argument for the DMA mapping API is bogus, as the DMA mapping API may use information from the "struct device" to perform the DMA mapping operation. Therefore, pass the appropriate "struct device". Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net: sh_eth: use correct "struct device" when calling DMA mapping functionsThomas Petazzoni2017-12-051-9/+10
|/ | | | | | | | | | | | | | | | | | | | | | | There are two types of "struct device": the one representing the physical device on its physical bus (platform, SPI, PCI, etc.), and the one representing the logical device in its device class (net, etc.). The DMA mapping API expects to receive as argument a "struct device" representing the physical device, as the "struct device" contains information about the bus that the DMA API needs. However, the sh_eth driver mistakenly uses the "struct device" representing the logical device (embedded in "struct net_device") rather than the "struct device" representing the physical device on its bus. This commit fixes that by adjusting all calls to the DMA mapping API. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge branch 'RED-qdisc-fixes'David S. Miller2017-12-055-1/+23
|\ | | | | | | | | | | | | | | | | | | | | | | Nogah Frankel says: ==================== RED qdisc fixes Add some input validation checks to RED qdisc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| * net_sched: red: Avoid illegal valuesNogah Frankel2017-12-055-0/+22
| | | | | | | | | | | | | | | | | | Check the qmin & qmax values doesn't overflow for the given Wlog value. Check that qmin <= qmax. Fixes: a783474591f2 ("[PKT_SCHED]: Generic RED layer") Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
| * net_sched: red: Avoid devision by zeroNogah Frankel2017-12-051-1/+1
|/ | | | | | | | Do not allow delta value to be zero since it is used as a divisor. Fixes: 8af2a218de38 ("sch_red: Adaptative RED AQM") Signed-off-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* gianfar: fix a flooded alignment reports because of padding issue.Zumeng Chen2017-12-051-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | According to LS1021A RM, the value of PAL can be set so that the start of the IP header in the receive data buffer is aligned to a 32-bit boundary. Normally, setting PAL = 2 provides minimal padding to ensure such alignment of the IP header. However every incoming packet's 8-byte time stamp will be inserted into the packet data buffer as padding alignment bytes when hardware time stamping is enabled. So we set the padding 8+2 here to avoid the flooded alignment faults: root@128:~# cat /proc/cpu/alignment User: 0 System: 17539 (inet_gro_receive+0x114/0x2c0) Skipped: 0 Half: 0 Word: 0 DWord: 0 Multi: 17539 User faults: 2 (fixup) Also shown when exception report enablement CPU: 0 PID: 161 Comm: irq/66-eth1_g0_ Not tainted 4.1.21-rt13-WR8.0.0.0_preempt-rt #16 Hardware name: Freescale LS1021A [<8001b420>] (unwind_backtrace) from [<8001476c>] (show_stack+0x20/0x24) [<8001476c>] (show_stack) from [<807cfb48>] (dump_stack+0x94/0xac) [<807cfb48>] (dump_stack) from [<80025d70>] (do_alignment+0x720/0x958) [<80025d70>] (do_alignment) from [<80009224>] (do_DataAbort+0x40/0xbc) [<80009224>] (do_DataAbort) from [<80015398>] (__dabt_svc+0x38/0x60) Exception stack(0x86ad1cc0 to 0x86ad1d08) 1cc0: f9b3e080 86b3d072 2d78d287 00000000 866816c0 86b3d05e 86e785d0 00000000 1ce0: 00000011 0000000e 80840ab0 86ad1d3c 86ad1d08 86ad1d08 806d7fc0 806d806c 1d00: 40070013 ffffffff [<80015398>] (__dabt_svc) from [<806d806c>] (inet_gro_receive+0x114/0x2c0) [<806d806c>] (inet_gro_receive) from [<80660eec>] (dev_gro_receive+0x21c/0x3c0) [<80660eec>] (dev_gro_receive) from [<8066133c>] (napi_gro_receive+0x44/0x17c) [<8066133c>] (napi_gro_receive) from [<804f0538>] (gfar_clean_rx_ring+0x39c/0x7d4) [<804f0538>] (gfar_clean_rx_ring) from [<804f0bf4>] (gfar_poll_rx_sq+0x58/0xe0) [<804f0bf4>] (gfar_poll_rx_sq) from [<80660b10>] (net_rx_action+0x27c/0x43c) [<80660b10>] (net_rx_action) from [<80033638>] (do_current_softirqs+0x1e0/0x3dc) [<80033638>] (do_current_softirqs) from [<800338c4>] (__local_bh_enable+0x90/0xa8) [<800338c4>] (__local_bh_enable) from [<8008025c>] (irq_forced_thread_fn+0x70/0x84) [<8008025c>] (irq_forced_thread_fn) from [<800805e8>] (irq_thread+0x16c/0x244) [<800805e8>] (irq_thread) from [<8004e490>] (kthread+0xe8/0x104) [<8004e490>] (kthread) from [<8000fda8>] (ret_from_fork+0x14/0x2c) Signed-off-by: Zumeng Chen <zumeng.chen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "net: core: maybe return -EEXIST in __dev_alloc_name"Johannes Berg2017-12-051-1/+1
| | | | | | | | | | | This reverts commit d6f295e9def0; some userspace (in the case we noticed it's wpa_supplicant), is relying on the current error code to determine that a fixed name interface already exists. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* nfp: fix port stats for mac representorsPieter Jansen van Vuuren2017-12-051-9/+6
| | | | | | | | | | | | | Previously we swapped the tx_packets, tx_bytes and tx_dropped counters with rx_packets, rx_bytes and rx_dropped counters, respectively. This behaviour is correct and expected for VF representors but it should not be swapped for physical port mac representors. Fixes: eadfa4c3be99 ("nfp: add stats and xmit helpers for representors") Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "tcp: must block bh in __inet_twsk_hashdance()"Eric Dumazet2017-12-051-3/+3
| | | | | | | | | | | We had to disable BH _before_ calling __inet_twsk_hashdance() in commit cfac7f836a71 ("tcp/dccp: block bh before arming time_wait timer"). This means we can revert 614bdd4d6e61 ("tcp: must block bh in __inet_twsk_hashdance()"). Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds2017-12-043-3/+5
|\ | | | | | | | | | | | | | | | | | | | | | | Pull virtio fixes from Michael Tsirkin: "virtio and qemu bugfixes A couple of bugfixes that just became ready" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio_balloon: fix increment of vb->num_pfns in fill_balloon() virtio: release virtio index when fail to device_register fw_cfg: fix driver remove
| * virtio_balloon: fix increment of vb->num_pfns in fill_balloon()Jan Stancek2017-12-011-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | commit c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM") changed code to increment vb->num_pfns before call to set_page_pfns(), which used to happen only after. This patch fixes boot hang for me on ppc64le KVM guests. Fixes: c7cdff0e8647 ("virtio_balloon: fix deadlock on OOM") Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Michal Hocko <mhocko@suse.com> Cc: Wei Wang <wei.w.wang@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Jan Stancek <jstancek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * virtio: release virtio index when fail to device_registerweiping zhang2017-12-011-0/+2
| | | | | | | | | | | | | | | | | | index can be reused by other virtio device. Cc: stable@vger.kernel.org Signed-off-by: weiping zhang <zhangweiping@didichuxing.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
| * fw_cfg: fix driver removeMarc-André Lureau2017-12-011-1/+2
| | | | | | | | | | | | | | | | | | | | On driver remove(), all objects created during probe() should be removed, but sysfs qemu_fw_cfg/rev file was left. Also reorder functions to match probe() error cleanup code. Cc: stable@vger.kernel.org Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
* | Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2017-12-0454-187/+397
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull networking fixes from David Miller: 1) Various TCP control block fixes, including one that crashes with SELinux, from David Ahern and Eric Dumazet. 2) Fix ACK generation in rxrpc, from David Howells. 3) ipvlan doesn't set the mark properly in the ipv4 route lookup key, from Gao Feng. 4) SIT configuration doesn't take on the frag_off ipv4 field configuration properly, fix from Hangbin Liu. 5) TSO can fail after device down/up on stmmac, fix from Lars Persson. 6) Various bpftool fixes (mostly in JSON handling) from Quentin Monnet. 7) Various SKB leak fixes in vhost/tun/tap (mostly observed as performance problems). From Wei Xu. 8) mvpps's TX descriptors were not zero initialized, from Yan Markman. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (57 commits) tcp: use IPCB instead of TCP_SKB_CB in inet_exact_dif_match() tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb() rxrpc: Fix the MAINTAINERS record rxrpc: Use correct netns source in rxrpc_release_sock() liquidio: fix incorrect indentation of assignment statement stmmac: reset last TSO segment size after device open ipvlan: Add the skb->mark as flow4's member to lookup route s390/qeth: build max size GSO skbs on L2 devices s390/qeth: fix GSO throughput regression s390/qeth: fix thinko in IPv4 multicast address tracking tap: free skb if flags error tun: free skb in early errors vhost: fix skb leak in handle_rx() bnxt_en: Fix a variable scoping in bnxt_hwrm_do_send_msg() bnxt_en: fix dst/src fid for vxlan encap/decap actions bnxt_en: wildcard smac while creating tunnel decap filter bnxt_en: Need to unconditionally shut down RoCE in bnxt_shutdown phylink: ensure we take the link down when phylink_stop() is called sfp: warn about modules requiring address change sequence sfp: improve RX_LOS handling ...
| * \ Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller2017-12-0310-21/+77
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Daniel Borkmann says: ==================== pull-request: bpf 2017-12-02 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a compilation warning in xdp redirect tracepoint due to missing bpf.h include that pulls in struct bpf_map, from Xie. 2) Limit the maximum number of attachable BPF progs for a given perf event as long as uabi is not frozen yet. The hard upper limit is now 64 and therefore the same as with BPF multi-prog for cgroups. Also add related error checking for the sample BPF loader when enabling and attaching to the perf event, from Yonghong. 3) Specifically set the RLIMIT_MEMLOCK for the test_verifier_log case, so that the test case can always pass and not fail in some environments due to too low default limit, also from Yonghong. 4) Fix up a missing license header comment for kernel/bpf/offload.c, from Jakub. 5) Several fixes for bpftool, among others a crash on incorrect arguments when json output is used, error message handling fixes on unknown options and proper destruction of json writer for some exit cases, all from Quentin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
| | * | samples/bpf: add error checking for perf ioctl calls in bpf loaderYonghong Song2017-12-011-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | load_bpf_file() should fail if ioctl with command PERF_EVENT_IOC_ENABLE and PERF_EVENT_IOC_SET_BPF fails. When they do fail, proper error messages are printed. With this change, the below "syscall_tp" run shows that the maximum number of bpf progs attaching to the same perf tracepoint is indeed enforced. $ ./syscall_tp -i 64 prog #0: map ids 4 5 ... prog #63: map ids 382 383 $ ./syscall_tp -i 65 prog #0: map ids 4 5 ... prog #64: map ids 388 389 ioctl PERF_EVENT_IOC_SET_BPF failed err Argument list too long Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | * | bpf: set maximum number of attached progs to 64 for a single perf tpYonghong Song2017-12-012-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | cgropu+bpf prog array has a maximum number of 64 programs. Let us apply the same limit here. Fixes: e87c6bc3852b ("bpf: permit multiple bpf attachments for a single perf event") Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | * | tools/bpf: adjust rlimit RLIMIT_MEMLOCK for test_verifier_logYonghong Song2017-11-301-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The default rlimit RLIMIT_MEMLOCK is 64KB. In certain cases, e.g. in a test machine mimicking our production system, this test may fail due to unable to charge the required memory for prog load: # ./test_verifier_log Test log_level 0... ERROR: Program load returned: ret:-1/errno:1, expected ret:-1/errno:22 Changing the default rlimit RLIMIT_MEMLOCK to unlimited makes the test always pass. Signed-off-by: Yonghong Song <yhs@fb.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | * | trace/xdp: fix compile warning: 'struct bpf_map' declared inside parameter listXie XiuQi2017-11-301-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We meet this compile warning, which caused by missing bpf.h in xdp.h. In file included from ./include/trace/events/xdp.h:10:0, from ./include/linux/bpf_trace.h:6, from drivers/net/ethernet/intel/i40e/i40e_txrx.c:29: ./include/trace/events/xdp.h:93:17: warning: ‘struct bpf_map’ declared inside parameter list will not be visible outside of this definition or declaration const struct bpf_map *map, u32 map_index), ^ ./include/linux/tracepoint.h:187:34: note: in definition of macro ‘__DECLARE_TRACE’ static inline void trace_##name(proto) \ ^~~~~ ./include/linux/tracepoint.h:352:24: note: in expansion of macro ‘PARAMS’ __DECLARE_TRACE(name, PARAMS(proto), PARAMS(args), \ ^~~~~~ ./include/linux/tracepoint.h:477:2: note: in expansion of macro ‘DECLARE_TRACE’ DECLARE_TRACE(name, PARAMS(proto), PARAMS(args)) ^~~~~~~~~~~~~ ./include/linux/tracepoint.h:477:22: note: in expansion of macro ‘PARAMS’ DECLARE_TRACE(name, PARAMS(proto), PARAMS(args)) ^~~~~~ ./include/trace/events/xdp.h:89:1: note: in expansion of macro ‘DEFINE_EVENT’ DEFINE_EVENT(xdp_redirect_template, xdp_redirect, ^~~~~~~~~~~~ ./include/trace/events/xdp.h:90:2: note: in expansion of macro ‘TP_PROTO’ TP_PROTO(const struct net_device *dev, ^~~~~~~~ ./include/trace/events/xdp.h:93:17: warning: ‘struct bpf_map’ declared inside parameter list will not be visible outside of this definition or declaration const struct bpf_map *map, u32 map_index), ^ ./include/linux/tracepoint.h:203:38: note: in definition of macro ‘__DECLARE_TRACE’ register_trace_##name(void (*probe)(data_proto), void *data) \ ^~~~~~~~~~ ./include/linux/tracepoint.h:354:4: note: in expansion of macro ‘PARAMS’ PARAMS(void *__data, proto), \ ^~~~~~ Reported-by: Huang Daode <huangdaode@hisilicon.com> Cc: Hanjun Guo <guohanjun@huawei.com> Fixes: 8d3b778ff544 ("xdp: tracepoint xdp_redirect also need a map argument") Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | * | Merge branch 'bpftool-misc-fixes'Daniel Borkmann2017-11-304-18/+32
| | |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Quentin Monnet says: ==================== First commit in this series fixes a crash that occurs when incorrect arguments are passed to bpftool after the `--json` option. It comes from the usage() function trying to use the JSON writer, although the latter has not been created yet at that point. Other patches add destruction of the writer in case the program exits in usage(), fix error messages handling when an unrecognized option is encountered, remove a spurious new-line character in an error message. Last patches are related to the Makefiles. They fix the installation directory prefix and .PHONY targets. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | | * | tools: bpftool: declare phony targets as suchQuentin Monnet2017-11-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In the Makefile, targets install, doc and doc-install should be added to .PHONY. Let's fix this. Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | | * | tools: bpftool: unify installation directoriesQuentin Monnet2017-11-302-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Programs and documentation not managed by package manager are generally installed under /usr/local/, instead of the user's home directory. In particular, `man` is generally able to find manual pages under `/usr/local/share/man`. bpftool generally follows perf's example, and perf installs to home directory. However bpftool requires root credentials, so it seems sensible to follow the more common convention of installing files under /usr/local instead. So, make /usr/local the default prefix for installing the binary with `make install`, and the documentation with `make doc-install`. Also, create /usr/local/sbin if it does not exist. Note that the bash-completion file, however, is still installed under /usr/share/bash-completion/completions, as the default setup for bash does not attempt to load completion files under /usr/local/. Reported-by: David Beckett <david.beckett@netronome.com> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | | * | tools: bpftool: remove spurious line break from error messageQuentin Monnet2017-11-301-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The end-of-line character inside the string would break JSON compliance. Remove it, `p_err()` already adds a '\n' character for plain output anyway. Fixes: 9a5ab8bf1d6d ("tools: bpftool: turn err() and info() macros into functions") Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | | * | tools: bpftool: make error message from getopt_long() JSON-friendlyQuentin Monnet2017-11-301-1/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If `getopt_long()` meets an unknown option, it prints its own error message to standard error output. While this does not strictly break JSON output, it is the only case bpftool prints something to standard error output if JSON output is required. All other errors are printed on standard output as JSON objects, so that an external program does not have to parse stderr. This is changed by setting the global variable `opterr` to 0. Furthermore, p_err() is used to reproduce the error message in a more JSON-friendly way, so that users still get to know what the erroneous option is. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | | * | tools: bpftool: clean up the JSON writer before exiting in usage()Quentin Monnet2017-11-302-2/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The writer is cleaned at the end of the main function, but not if the program exits sooner in usage(). Let's keep it clean and destroy the writer before exiting. Destruction and actual call to exit() are moved to another function so that clean exit can also be performed without printing usage() hints. Fixes: d35efba99d92 ("tools: bpftool: introduce --json and --pretty options") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
| | | * | tools: bpftool: fix crash on bad parameters with JSONQuentin Monnet2017-11-301-10/+9
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If bad or unrecognised parameters are specified after JSON output is requested, `usage()` will try to output null JSON object before the writer is created. To prevent this, create the writer as soon as the `--json` option is parsed. Fixes: 004b45c0e51a ("tools: bpftool: provide JSON output for all possible commands") Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
generated by cgit (git 2.34.1) at 2025-02-25 02:17:22 +0000