aboutsummaryrefslogtreecommitdiffstats
Commit message (Collapse)AuthorAgeFilesLines
* lpfc: Add support for Lancer G6 and 32G FC linksJames Smart2015-10-278-9/+58
| | | | | | | Signed-off-by: Dick Kennedy <dick.kennedy@avagotech.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* fix: lpfc_send_rscn_event sends bigger buffer sizeAles Novak2015-10-271-1/+1
| | | | | | | | | | | | | lpfc_send_rscn_event() allocates data for sizeof(struct lpfc_rscn_event_header) + payload_len, but claims that the data has size of sizeof(struct lpfc_els_event_header) + payload_len. That leads to buffer overruns. Signed-off-by: Ales Novak <alnovak@suse.cz> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* lpfc: remove set but not used variablesSebastian Herbszt2015-10-2710-126/+8
| | | | | | | | | Remove set but not used variables. Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* lpfc:Make the function lpfc_sli4_mbox_completions_pending static in order to ↵Nicholas Krause2015-10-271-1/+1
| | | | | | | | | | | | | | comply with function prototype This makes the function lpfc_sli4_mbox_completion's definition static now in order to comply with its prototype being also declared as static too. Signed-off-by: Nicholas Krause <xerofoify@gmail.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Sebastian Herbszt <herbszt@gmx.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* Fix kmalloc overflow in LPFC driver at large core countIan Mitchell2015-10-272-6/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch allows the LPFC to start up without a fatal kernel bug based on an exceeded KMALLOC_MAX_SIZE and a too large NR_CPU-based maskbits field. The bug was based on the number of CPU cores in a system. Using the get_cpu_mask() function declared in kernel/cpu.c allows the driver to load on the community kernel 4.2 RC1. Below is the kernel bug reproduced: 8<-------------------------------------------------------------------- 2199382.828437 ( 0.005216)| lpfc 0003:02:00.0: enabling device (0140 -> 0142) 2199382.999272 ( 0.170835)| ------------[ cut here ]------------ 2199382.999337 ( 0.000065)| WARNING: CPU: 84 PID: 404 at mm/slab_common.c:653 kmalloc_slab+0x2f/0x89() 2199383.004534 ( 0.005197)| Modules linked in: lpfc(+) usbcore(+) mptctl scsi_transport_fc sg lpc_ich i2c_i801 usb_common tpm_tis mfd_core tpm acpi_cpufreq button scsi_dh_alua scsi_dh_rdacusbcore: registered new device driver usb 2199383.020568 ( 0.016034)| 2199383.020581 ( 0.000013)| scsi_dh_hp_sw scsi_dh_emc scsi_dh gru thermal sata_nv processor piix fan thermal_sysehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver 2199383.035288 ( 0.014707)| 2199383.035306 ( 0.000018)| hwmon ata_piix 2199383.035336 ( 0.000030)| CPU: 84 PID: 404 Comm: kworker/84:0 Not tainted 3.18.0-rc2-gat-00106-ga7ca10f-dirty #178 2199383.047077 ( 0.011741)| ehci-pci: EHCI PCI platform driver 2199383.047134 ( 0.000057)| Hardware name: SGI UV2000/ROMLEY, BIOS SGI UV 2000/3000 series BIOS 01/15/2013 2199383.056245 ( 0.009111)| Workqueue: events work_for_cpu_fn 2199383.066174 ( 0.009929)| 000000000000028d ffff88eef827bbe8 ffffffff815a542f 000000000000028d 2199383.069545 ( 0.003371)| ffffffff810ea142 ffff88eef827bc28 ffffffff8104365c ffff88eefe4006c8 2199383.076214 ( 0.006669)| 0000000000000000 00000000000080d0 0000000000000000 0000000000000004 2199383.079213 ( 0.002999)| Call Trace: 2199383.084084 ( 0.004871)| [<ffffffff815a542f>] dump_stack+0x49/0x62 2199383.087283 ( 0.003199)| [<ffffffff810ea142>] ? kmalloc_slab+0x2f/0x89 2199383.091415 ( 0.004132)| [<ffffffff8104365c>] warn_slowpath_common+0x77/0x92 2199383.095197 ( 0.003782)| [<ffffffff8104368c>] warn_slowpath_null+0x15/0x17 2199383.103336 ( 0.008139)| [<ffffffff810ea142>] kmalloc_slab+0x2f/0x89 2199383.107082 ( 0.003746)| [<ffffffff8110fd9e>] __kmalloc+0x13/0x16a 2199383.112531 ( 0.005449)| [<ffffffffa01a8ed9>] lpfc_pci_probe_one_s4+0x105b/0x1644 [lpfc] 2199383.115316 ( 0.002785)| [<ffffffff81302b92>] ? pci_bus_read_config_dword+0x75/0x87 2199383.123431 ( 0.008115)| [<ffffffffa01a951f>] lpfc_pci_probe_one+0x5d/0xcb5 [lpfc] 2199383.127364 ( 0.003933)| [<ffffffff81497119>] ? dbs_check_cpu+0x168/0x177 2199383.136438 ( 0.009074)| [<ffffffff81496fa5>] ? gov_queue_work+0xb4/0xc0 2199383.140407 ( 0.003969)| [<ffffffff8130b2a1>] local_pci_probe+0x1e/0x52 2199383.143105 ( 0.002698)| [<ffffffff81052c47>] work_for_cpu_fn+0x13/0x1b 2199383.147315 ( 0.004210)| [<ffffffff81054965>] process_one_work+0x222/0x35e 2199383.151379 ( 0.004064)| [<ffffffff81054e76>] worker_thread+0x3d5/0x46e 2199383.159402 ( 0.008023)| [<ffffffff81054aa1>] ? process_one_work+0x35e/0x35e 2199383.163097 ( 0.003695)| [<ffffffff810599c6>] kthread+0xc8/0xd2 2199383.167476 ( 0.004379)| [<ffffffff810598fe>] ? kthread_freezable_should_stop+0x5b/0x5b 2199383.176434 ( 0.008958)| [<ffffffff815a8cac>] ret_from_fork+0x7c/0xb0 2199383.180086 ( 0.003652)| [<ffffffff810598fe>] ? kthread_freezable_should_stop+0x5b/0x5b 2199383.192333 ( 0.012247)| ehci-pci 0000:00:1a.0: EHCI Host Controller -------------------------------------------------------------------->8 The proposed solution was approved by James Smart at Emulex and tested on a UV2 machine with 6144 cores. With the fix, the LPFC module loads with no unwanted effects on the system. Signed-off-by: Ian Mitchell <imitchell@sgi.com> Signed-off-by: Alex Thorlton <athorlton@sgi.com> Suggested-by: Robert Elliot <elliott@hp.com> [james.smart: resolve unused variable warning] Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* lpfc: Destroy lpfc_hba_index IDR on module exitJohannes Thumshirn2015-10-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Destroy lpfc_hba_index IDR on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* lpfc: in sli3 use configured sg_seg_cnt for sg_tablesizeBodo Stroesser2015-10-271-1/+1
| | | | | | | | | | | | | | | | | | Currently the module parameter lpfc_sg_seg_count does not have effect for sli3 devices. In lpfc_sli_driver_resource_setup(), which is used for sli3, the code writes the configured sg_seg_cnt into lpfc_template.sg_tablesize. But lpfc_template is the template used for sli4 only. Thus the value should correctly be written to lpfc_template_s3->sg_tablesize. This patch is for kernel 4.1-rc5, but is tested with lpfc 10.2.405.26 only. Signed-off-by: Bodo Stroesser <bstroesser@ts.fujitsu.com> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Sebastian Herbszt <herbszt@gmx.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* lpfc: Remove unnessary castFiro Yang2015-10-271-2/+1
| | | | | | | | | kzalloc() returns a void pointer - no need to cast it in drivers/scsi/lpfc/lpfc_init.c::lpfc_sli_driver_resource_setup() Signed-off-by: Firo Yang <firogm@gmail.com> Signed-off-by: James Smart <james.smart@avagotech.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* lpfc: fix model descriptionSebastian Herbszt2015-10-271-1/+1
| | | | | | | | | Remove trailing space from model description. Signed-off-by: Sebastian Herbszt <herbszt@gmx.de> Signed-off-by: James Smart <james.smart@avagotech.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* 3w-9xxx: don't unmap bounce buffered commandsChristoph Hellwig2015-10-071-7/+21
| | | | | | | | | | | | | | | 3w controller don't dma map small single SGL entry commands but instead bounce buffer them. Add a helper to identify these commands and don't call scsi_dma_unmap for them. Based on an earlier patch from James Bottomley. Fixes: 118c85 ("3w-9xxx: fix command completion race") Reported-by: Tóth Attila <atoth@atoth.sote.hu> Tested-by: Tóth Attila <atoth@atoth.sote.hu> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Adam Radford <aradford@gmail.com> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* scsi_dh: Use the correct module name when loading device handlerPaul Mackerras2015-10-011-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a bug in recent kernels which results in failure to boot on systems that have multipath SCSI disks. I observed this failure on a POWER8 server where all the disks are multipath SCSI disks. The symptoms are several messages like this on the console: [ 3.018700] device-mapper: table: 253:0: multipath: error attaching hardware handler [ 3.018828] device-mapper: ioctl: error adding target to table and the system does not find its disks, and therefore fails to boot. Bisection revealed that the bug was introduced in commit 566079c849cf, "dm-mpath, scsi_dh: request scsi_dh modules in scsi_dh, not dm-mpath". The specific reason for the failure is that where we previously loaded the "scsi_dh_alua" module, we are now trying to load the "alua" module, which doesn't exist. To fix this, we change the request_module call in scsi_dh_lookup() to prepend "scsi_dh_" to the name, just like the old code in drivers/md/dm-mpath.c:parse_hw_handler() used to do. [jejb: also fixes issue spotted by Sasha Levin that formatting characters could be passed in via sysfs and cause issues with request_module()] Fixes: 566079c849cf Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Cc: Sasha Levin <sasha.levin@oracle.com> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* libiscsi: Fix iscsi_check_transport_timeouts possible infinite loopAriel Nahum2015-09-171-6/+11
| | | | | | | | | | | | | | | Connection last_ping is not being updated when iscsi_send_nopout fails. Not updating the last_ping will cause firing a timer to a past time (last_ping + ping_tmo < current_time) which triggers an infinite loop of iscsi_check_transport_timeouts() and hogs the cpu. Fix this issue by checking the return value of iscsi_send_nopout. If it fails set the next_timeout to one second later. Signed-off-by: Ariel Nahum <arieln@mellanox.com> Signed-off-by: Sagi Grimberg <sagig@mellanox.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* Linux 4.3-rc1v4.3-rc1Linus Torvalds2015-09-121-2/+2
|
* Merge tag 'cris-for-4.3' of ↵Linus Torvalds2015-09-1250-421/+220
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris Pull CRIS updates from Jesper Nilsson: "Mostly removal of old cruft of which we can use a generic version, or fixes for code not commonly run in the cris port, but also additions to enable some good debug" * tag 'cris-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: (25 commits) CRISv10: delete unused lib/dmacopy.c CRISv10: delete unused lib/old_checksum.c CRIS: fix switch_mm() lockdep splat CRISv32: enable LOCKDEP_SUPPORT CRIS: add STACKTRACE_SUPPORT CRISv32: annotate irq enable in idle loop CRISv32: add support for irqflags tracing CRIS: UAPI: use generic types.h CRIS: UAPI: use generic shmbuf.h CRIS: UAPI: use generic msgbuf.h CRIS: UAPI: use generic socket.h CRIS: UAPI: use generic sembuf.h CRIS: UAPI: use generic sockios.h CRIS: UAPI: use generic auxvec.h CRIS: UAPI: use generic headers via Kbuild CRIS: UAPI: fix elf.h export CRIS: don't make asm/elf.h depend on asm/user.h CRIS: UAPI: fix ptrace.h CRISv32: Squash compile warnings for axisflashmap CRISv32: Add GPIO driver to the default configs ...
| * CRISv10: delete unused lib/dmacopy.cRabin Vincent2015-09-051-42/+0
| | | | | | | | | | | | | | This file is never built. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
| * CRISv10: delete unused lib/old_checksum.cRabin Vincent2015-09-051-86/+0
| | | | | | | | | | | | | | This file is never built. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: fix switch_mm() lockdep splatRabin Vincent2015-09-051-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With lockdep support implemented on CRISv32, we get the following splat. switch_mm() can be called both from the scheduler() (with interrupts disabled) and from flush_old_exec (via activate_mm()), with interrupts enabled. Fix it by disabling interrupts in activate_mm(), similar to powerpc and hexagon. t====================================================== [ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ] 3.19.0-08802-g20bc9f1-dirty #323 Not tainted ------------------------------------------------------ init/1 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire: (mmu_context_lock){+.+...}, at: [<c0009290>] switch_mm+0x22/0xc6 and this task is already holding: (&rq->lock){-.-.-.}, at: [<c01a0756>] __schedule+0x5e/0x648 which would create a new lock dependency: (&rq->lock){-.-.-.} -> (mmu_context_lock){+.+...} but this new dependency connects a HARDIRQ-irq-safe lock: (&rq->lock){-.-.-.} ... which became HARDIRQ-irq-safe at: [<c002b03c>] scheduler_tick+0x28/0x5e [<c0007c6c>] timer_interrupt+0x4e/0x6a [<c0043ac4>] handle_irq_event_percpu+0x54/0x13c [<c004343c>] generic_handle_irq+0x2a/0x36 to a HARDIRQ-irq-unsafe lock: (mmu_context_lock){+.+...} ... which became HARDIRQ-irq-unsafe at: ... [<c0039e60>] __lock_acquire+0x8f8/0x1d9c [<c0009290>] switch_mm+0x22/0xc6 [<c009c260>] flush_old_exec+0x500/0x5d4 [<c00da4c6>] load_elf_phdrs+0x7a/0x84 [<c00dbdb0>] load_elf_binary+0x21c/0x13b4 [<c009cdb6>] do_execve+0x22/0x2c [<c001dcf2>] ____call_usermodehelper+0x0/0x154 [<c000581e>] ret_from_kernel_thread+0xe/0x14 other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(mmu_context_lock); local_irq_disable(); lock(&rq->lock); lock(mmu_context_lock); <Interrupt> lock(&rq->lock); *** DEADLOCK *** 1 lock held by init/1: #0: (&rq->lock){-.-.-.}, at: [<c01a0756>] __schedule+0x5e/0x648 Call Trace: [<c019fe9e>] printk+0x0/0x4e [<c00368f8>] print_shortest_lock_dependencies+0x0/0x15c [<c0048628>] print_stack_trace+0x0/0x88 [<c0038912>] __lock_is_held+0x3e/0x5e [<c003b894>] lock_acquire+0x8a/0xcc [<c01a50c4>] _raw_spin_lock+0x44/0x7a [<c0009290>] switch_mm+0x22/0xc6 [<c01a06f8>] __schedule+0x0/0x648 [<c01a0d76>] schedule+0x36/0x7c [<c0037d04>] trace_hardirqs_on+0x0/0x1e [<c0004e18>] do_work_pending+0x30/0xd4 [<c000591a>] _work_pending+0xe/0x12 Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRISv32: enable LOCKDEP_SUPPORTRabin Vincent2015-09-051-0/+4
| | | | | | | | | | | | | | | | Now that we have stack tracing and irq flags tracing support, we can also enable lockdep support Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: add STACKTRACE_SUPPORTRabin Vincent2015-09-054-0/+88
| | | | | | | | | | | | | | | | | | | | Add stacktrace support, which is required for lockdep and tracing. The stack tracing simply looks at all kernel text symbols found on the stack, similar to the trap stack dumping code, which can also be converted to use this. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRISv32: annotate irq enable in idle loopRabin Vincent2015-09-051-2/+2
| | | | | | | | | | | | | | | | Use a call to local_irq_enable() instead of incline asm so that the irqsoff latency tracer knows that interrupts are enabled here. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRISv32: add support for irqflags tracingRabin Vincent2015-09-053-1/+20
| | | | | | | | | | | | | | | | Add support irqflags tracing, which is required for things like lockdep and ftrace. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: UAPI: use generic types.hRabin Vincent2015-09-053-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CRIS' types.h is functionally identical to the asm-generic version. Effective diff: +#ifndef _ASM_GENERIC_TYPES_H +#define _ASM_GENERIC_TYPES_H + #include <asm-generic/int-ll64.h> + +#endif Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: UAPI: use generic shmbuf.hRabin Vincent2015-09-052-42/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CRIS' shmbuf.h is equivalent to the asm-generic verison. Effective diff: -#ifndef _CRIS_SHMBUF_H -#define _CRIS_SHMBUF_H +#ifndef __ASM_GENERIC_SHMBUF_H +#define __ASM_GENERIC_SHMBUF_H + +#include <asm/bitsperlong.h> struct ipc64_perm shm_perm; size_t shm_segsz; __kernel_time_t shm_atime; +#if __BITS_PER_LONG != 64 unsigned long __unused1; +#endif __kernel_time_t shm_dtime; +#if __BITS_PER_LONG != 64 unsigned long __unused2; +#endif __kernel_time_t shm_ctime; +#if __BITS_PER_LONG != 64 unsigned long __unused3; +#endif __kernel_pid_t shm_cpid; __kernel_pid_t shm_lpid; - unsigned long shm_nattch; - unsigned long __unused4; - unsigned long __unused5; + __kernel_ulong_t shm_nattch; + __kernel_ulong_t __unused4; + __kernel_ulong_t __unused5; }; struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; + __kernel_ulong_t shmmax; + __kernel_ulong_t shmmin; + __kernel_ulong_t shmmni; + __kernel_ulong_t shmseg; + __kernel_ulong_t shmall; + __kernel_ulong_t __unused1; + __kernel_ulong_t __unused2; + __kernel_ulong_t __unused3; + __kernel_ulong_t __unused4; }; #endif Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: UAPI: use generic msgbuf.hRabin Vincent2015-09-052-33/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CRIS' msgbuf.h is equivalent to the asm-generic version. Effective diff: -#ifndef _CRIS_MSGBUF_H -#define _CRIS_MSGBUF_H - - +#ifndef __ASM_GENERIC_MSGBUF_H +#define __ASM_GENERIC_MSGBUF_H +#include <asm/bitsperlong.h> struct msqid64_ds { struct ipc64_perm msg_perm; __kernel_time_t msg_stime; +#if __BITS_PER_LONG != 64 unsigned long __unused1; +#endif __kernel_time_t msg_rtime; +#if __BITS_PER_LONG != 64 unsigned long __unused2; +#endif __kernel_time_t msg_ctime; +#if __BITS_PER_LONG != 64 unsigned long __unused3; - unsigned long msg_cbytes; - unsigned long msg_qnum; - unsigned long msg_qbytes; +#endif + __kernel_ulong_t msg_cbytes; + __kernel_ulong_t msg_qnum; + __kernel_ulong_t msg_qbytes; __kernel_pid_t msg_lspid; __kernel_pid_t msg_lrpid; - unsigned long __unused4; - unsigned long __unused5; + __kernel_ulong_t __unused4; + __kernel_ulong_t __unused5; }; #endif Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: UAPI: use generic socket.hRabin Vincent2015-09-052-92/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CRIS' socket.h is equivalent to the asm-generic version. Effective diff: -#ifndef _ASM_SOCKET_H -#define _ASM_SOCKET_H - - +#ifndef __ASM_GENERIC_SOCKET_H +#define __ASM_GENERIC_SOCKET_H #include <asm/sockios.h> #define SO_LINGER 13 #define SO_BSDCOMPAT 14 #define SO_REUSEPORT 15 +#ifndef SO_PASSCRED #define SO_PASSCRED 16 #define SO_PEERCRED 17 #define SO_RCVLOWAT 18 #define SO_SNDLOWAT 19 #define SO_RCVTIMEO 20 #define SO_SNDTIMEO 21 +#endif #define SO_SECURITY_AUTHENTICATION 22 Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: UAPI: use generic sembuf.hRabin Vincent2015-09-052-25/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CRIS's sembuf.h is equivalent to the asm-generic version. Effective diff: -#ifndef _CRIS_SEMBUF_H -#define _CRIS_SEMBUF_H +#ifndef __ASM_GENERIC_SEMBUF_H +#define __ASM_GENERIC_SEMBUF_H +#include <asm/bitsperlong.h> struct semid64_ds { struct ipc64_perm sem_perm; __kernel_time_t sem_otime; +#if __BITS_PER_LONG != 64 unsigned long __unused1; +#endif __kernel_time_t sem_ctime; +#if __BITS_PER_LONG != 64 unsigned long __unused2; +#endif unsigned long sem_nsems; unsigned long __unused3; unsigned long __unused4; Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: UAPI: use generic sockios.hRabin Vincent2015-09-052-13/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | CRIS' sockios.h is equivalent to the asm-generic version. Effective diff: -#ifndef __ARCH_CRIS_SOCKIOS__ -#define __ARCH_CRIS_SOCKIOS__ +#ifndef __ASM_GENERIC_SOCKIOS_H +#define __ASM_GENERIC_SOCKIOS_H Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: UAPI: use generic auxvec.hRabin Vincent2015-09-052-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | CRIS's auxvec.h is empty just like the asm-generic version. Effective diff: -#ifndef __ASMCRIS_AUXVEC_H -#define __ASMCRIS_AUXVEC_H +#ifndef __ASM_GENERIC_AUXVEC_H +#define __ASM_GENERIC_AUXVEC_H + Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: UAPI: use generic headers via KbuildRabin Vincent2015-09-0512-31/+10
| | | | | | | | | | | | | | Use Kbuild magic to include the generic headers. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: UAPI: fix elf.h exportRabin Vincent2015-09-054-1/+8
| | | | | | | | | | | | | | | | | | CRIS userspace (uClibc for one) expects asm/elf.h to be exported but this header appears to have gone missing at some point. Move it to uapi/ and export it. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: don't make asm/elf.h depend on asm/user.hRabin Vincent2015-09-053-8/+7
| | | | | | | | | | | | | | | | We're going to export asm/elf.h; remove its dependencies on the non-exported asm/user.h and the unused asm/system.h include. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: UAPI: fix ptrace.hRabin Vincent2015-09-056-3/+8
| | | | | | | | | | | | | | | | | | | | The exported ptrace.h header on CRIS references an "arch" directory which does not exist. Fix this by having the variants in the same directory and including them conditionally, similar to other architectures. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRISv32: Squash compile warnings for axisflashmapJesper Nilsson2015-09-051-4/+5
| | | | | | | | Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRISv32: Add GPIO driver to the default configsJesper Nilsson2015-09-054-14/+12
| | | | | | | | | | | | | | | | | | | | | | Fix a number of small issues visible when GPIO is enabled: - Correct missing default for !ETRAXFS in Kconfig - Remove information on number of bits for some Kconfigs related to the GPIO, they are different in ETRAX FS and ARTPEC-3 - Fix compile warning in ARTPEC-3 GPIO driver Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRISv32: ETRAX FS: Squash warnings in pinmux driverJesper Nilsson2015-09-051-2/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | Squash the followng warnings arch/cris/arch-v32/mach-fs/pinmux.c: In function 'crisv32_pinmux_alloc_fixed': arch/cris/arch-v32/mach-fs/pinmux.c:104:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] arch/cris/arch-v32/mach-fs/pinmux.c: In function 'crisv32_pinmux_dealloc_fixed': arch/cris/arch-v32/mach-fs/pinmux.c:238:2: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement] arch/cris/arch-v32/mach-fs/pinmux.c: In function '__crisv32_pinmux_alloc': arch/cris/arch-v32/mach-fs/pinmux.c:49:1: warning: control reaches end of non-void function [-Wreturn-type] Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
| * CRIS: Wire up missing syscallsChen Gang2015-09-054-1/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The related warnings: CALL scripts/checksyscalls.sh <stdin>:1229:2: warning: #warning syscall sched_setattr not implemented [-Wcpp] <stdin>:1232:2: warning: #warning syscall sched_getattr not implemented [-Wcpp] <stdin>:1235:2: warning: #warning syscall renameat2 not implemented [-Wcpp] <stdin>:1238:2: warning: #warning syscall seccomp not implemented [-Wcpp] <stdin>:1241:2: warning: #warning syscall getrandom not implemented [-Wcpp] <stdin>:1244:2: warning: #warning syscall memfd_create not implemented [-Wcpp] <stdin>:1247:2: warning: #warning syscall bpf not implemented [-Wcpp] <stdin>:1250:2: warning: #warning syscall execveat not implemented [-Wcpp] Signed-off-by: Chen Gang <gang.chen.5i5j@gmail.com> Signed-off-by: Jesper Nilsson <jespern@axis.com>
| * CRISv32: allow CONFIG_DEBUG_BUGVERBOSERabin Vincent2015-09-051-0/+1
| | | | | | | | | | | | | | | | Support for verbose BUG reporting already exists, but the HAVE flag that allows the option to be enabled is missing. Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
| * CRISv32: add unreachable() to BUG()Rabin Vincent2015-09-051-2/+9
| | | | | | | | | | | | | | | | | | | | | | Add an unreachable() in the BUG() implementations, to get rid of several warnings similar to the one below: kernel/sched/core.c: In function 'pick_next_task': kernel/sched/core.c:2690:1: warning: control reaches end of non-void function [-Wreturn-type] Signed-off-by: Rabin Vincent <rabin@rab.in> Signed-off-by: Jesper Nilsson <jespern@axis.com>
| * cris: arch-v32: gpio: Use kzalloc instead of kmalloc/memsetChristophe Jaillet2015-09-051-2/+1
| | | | | | | | | | | | | | | | Turn a kmalloc/memset into an equivalent kzalloc. Doing so also move the zero'ing of the memory outside of a mutex. Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr> Signed-off-by: Jesper Nilsson <jespern@axis.com>
* | blk: rq_data_dir() should not return a booleanLinus Torvalds2015-09-121-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | rq_data_dir() returns either READ or WRITE (0 == READ, 1 == WRITE), not a boolean value. Now, admittedly the "!= 0" doesn't really change the value (0 stays as zero, 1 stays as one), but it's not only redundant, it confuses gcc, and causes gcc to warn about the construct switch (rq_data_dir(req)) { case READ: ... case WRITE: ... that we have in a few drivers. Now, the gcc warning is silly and stupid (it seems to warn not about the switch value having a different type from the case statements, but about _any_ boolean switch value), but in this case the code itself is silly and stupid too, so let's just change it, and get rid of warnings like this: drivers/block/hd.c: In function ‘hd_request’: drivers/block/hd.c:630:11: warning: switch condition has boolean value [-Wswitch-bool] switch (rq_data_dir(req)) { The odd '!= 0' came in when "cmd_flags" got turned into a "u64" in commit 5953316dbf90 ("block: make rq->cmd_flags be 64-bit") and is presumably because the old code (that just did a logical 'and' with 1) would then end up making the type of rq_data_dir() be u64 too. But if we want to retain the old regular integer type, let's just cast the result to 'int' rather than use that rather odd '!= 0'. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | Merge branch 'writeback-plugging'Linus Torvalds2015-09-121-3/+10
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix up the writeback plugging introduced in commit d353d7587d02 ("writeback: plug writeback at a high level") that then caused problems due to the unplug happening with a spinlock held. * writeback-plugging: writeback: plug writeback in wb_writeback() and writeback_inodes_wb() Revert "writeback: plug writeback at a high level"
| * | writeback: plug writeback in wb_writeback() and writeback_inodes_wb()Linus Torvalds2015-09-121-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We had to revert the pluggin in writeback_sb_inodes() because the wb->list_lock is held, but we could easily plug at a higher level before taking that lock, and unplug after releasing it. This does that. Chris will run performance numbers, just to verify that this approach is comparable to the alternative (we could just drop and re-take the lock around the blk_finish_plug() rather than these two commits. I'd have preferred waiting for actual performance numbers before picking one approach over the other, but I don't want to release rc1 with the known "sleeping function called from invalid context" issue, so I'll pick this cleanup version for now. But if the numbers show that we really want to plug just at the writeback_sb_inodes() level, and we should just play ugly games with the spinlock, we'll switch to that. Cc: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | Revert "writeback: plug writeback at a high level"Linus Torvalds2015-09-111-3/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit d353d7587d02116b9732d5c06615aed75a4d3a47. Doing the block layer plug/unplug inside writeback_sb_inodes() is broken, because that function is actually called with a spinlock held: wb->list_lock, as pointed out by Chris Mason. Chris suggested just dropping and re-taking the spinlock around the blk_finish_plug() call (the plgging itself can happen under the spinlock), and that would technically work, but is just disgusting. We do something fairly similar - but not quite as disgusting because we at least have a better reason for it - in writeback_single_inode(), so it's not like the caller can depend on the lock being held over the call, but in this case there just isn't any good reason for that "release and re-take the lock" pattern. [ In general, we should really strive to avoid the "release and retake" pattern for locks, because in the general case it can easily cause subtle bugs when the caller caches any state around the call that might be invalidated by dropping the lock even just temporarily. ] But in this case, the plugging should be easy to just move up to the callers before the spinlock is taken, which should even improve the effectiveness of the plug. So there is really no good reason to play games with locking here. I'll send off a test-patch so that Dave Chinner can verify that that plug movement works. In the meantime this just reverts the problematic commit and adds a comment to the function so that we hopefully don't make this mistake again. Reported-by: Chris Mason <clm@fb.com> Cc: Josef Bacik <jbacik@fb.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Neil Brown <neilb@suse.de> Cc: Jan Kara <jack@suse.cz> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | thermal: fix intel PCH thermal driver mismergeLinus Torvalds2015-09-111-7/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | I didn't notice this when merging the thermal code from Zhang, but his merge (commit 5a924a07f882: "Merge branches 'thermal-core' and 'thermal-intel' of .git into next") of the thermal-core and thermal-intel branches was wrong. In thermal-core, commit 17e8351a7739 ("thermal: consistently use int for temperatures") converted the thermal layer to use "int" for temperatures. But in parallel, in the thermal-intel branch commit d0a12625d2ff ("thermal: Add Intel PCH thermal driver") added support for the intel PCH thermal sensor using the old interfaces that used "unsigned long" pointers. This resulted in warnings like this: drivers/thermal/intel_pch_thermal.c:184:14: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .get_temp = pch_thermal_get_temp, ^ drivers/thermal/intel_pch_thermal.c:184:14: note: (near initialization for ‘tzd_ops.get_temp’) drivers/thermal/intel_pch_thermal.c:186:19: warning: initialization from incompatible pointer type [-Wincompatible-pointer-types] .get_trip_temp = pch_get_trip_temp, ^ drivers/thermal/intel_pch_thermal.c:186:19: note: (near initialization for ‘tzd_ops.get_trip_temp’) This fixes it. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* | | Merge branch 'akpm' (patches from Andrew)Linus Torvalds2015-09-1122-54/+336
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Merge fourth patch-bomb from Andrew Morton: - sys_membarier syscall - seq_file interface changes - a few misc fixups * emailed patches from Andrew Morton <akpm@linux-foundation.org>: revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each" mm/early_ioremap: add explicit #include of asm/early_ioremap.h fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to void selftests: enhance membarrier syscall test selftests: add membarrier syscall test sys_membarrier(): system-wide memory barrier (generic, x86) MODSIGN: fix a compilation warning in extract-cert
| * | | revert "ocfs2/dlm: use list_for_each_entry instead of list_for_each"Andrew Morton2015-09-111-2/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Revert commit f83c7b5e9fd6 ("ocfs2/dlm: use list_for_each_entry instead of list_for_each"). list_for_each_entry() will dereference its `pos' argument, which can be NULL in dlm_process_recovery_data(). Reported-by: Julia Lawall <julia.lawall@lip6.fr> Reported-by: Fengguang Wu <fengguang.wu@gmail.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: Mark Fasheh <mfasheh@suse.de> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | mm/early_ioremap: add explicit #include of asm/early_ioremap.hArd Biesheuvel2015-09-111-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit 6b0f68e32ea8 ("mm: add utility for early copy from unmapped ram") introduces a function copy_from_early_mem() into mm/early_ioremap.c which itself calls early_memremap()/early_memunmap(). However, since early_memunmap() has not been declared yet at this point in the .c file, nor by any explicitly included header files, we are depending on a transitive include of asm/early_ioremap.h to declare it, which is fragile. So instead, include this header explicitly. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by: Mark Salter <msalter@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | fs/seq_file: convert int seq_vprint/seq_printf/etc... returns to voidJoe Perches2015-09-114-50/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The seq_<foo> function return values were frequently misused. See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to seq_has_overflowed() and make public") All uses of these return values have been removed, so convert the return types to void. Miscellanea: o Move seq_put_decimal_<type> and seq_escape prototypes closer the other seq_vprintf prototypes o Reorder seq_putc and seq_puts to return early on overflow o Add argument names to seq_vprintf and seq_printf o Update the seq_escape kernel-doc o Convert a couple of leading spaces to tabs in seq_escape Signed-off-by: Joe Perches <joe@perches.com> Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Mark Brown <broonie@kernel.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Joerg Roedel <jroedel@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | selftests: enhance membarrier syscall testMathieu Desnoyers2015-09-111-25/+75
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the membarrier syscall self-test to match the membarrier interface. Extend coverage of the interface. Consider ENOSYS as a "SKIP" test, since it is a valid configuration, but does not allow testing the system call. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Pranith Kumar <bobby.prani@gmail.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
| * | | selftests: add membarrier syscall testPranith Kumar2015-09-114-0/+84
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a self test for the membarrier system call. Signed-off-by: Pranith Kumar <bobby.prani@gmail.com> Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit (git 2.34.1) at 2025-02-27 20:38:48 +0000