aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/am335x-boneblack.dts
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: am335x-boneblack: Extract HDMI configPaul Barker2021-07-271-0/+1
| | | | | | | | | | | | Move the HDMI hardware configuration for the BeagleBone Black out of the boneblack common dtsi file and into its own separate dtsi file. This allows the devicetree for BeagleBone Black derivatives which lack the hdmi encoding hardware to include the common dtsi file without needing to duplicate configuration or override the status of all hdmi-related nodes. Signed-off-by: Paul Barker <paul.barker@sancloud.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-boneblack.dts: unique gpio-line-namesDrew Fustini2021-03-311-66/+66
| | | | | | | | | | | | | Based on linux-gpio discussion [1], it is best practice to make the gpio-line-names unique. Generic names like "[ethernet]" are replaced with the name of the unique signal on the AM3358 SoC ball corresponding to the gpio line. "[NC]" is also renamed to the standard "NC" name to represent "not connected". [1] https://lore.kernel.org/linux-gpio/20201216195357.GA2583366@x1/ Signed-off-by: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Replace HTTP links with HTTPS ones: OMAP DEVICE TREE SUPPORTAlexander A. Klimov2020-07-131-1/+1
| | | | | | | | | | | | | | | | | | | | Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-boneblack: add gpio-line-namesDrew Fustini2020-06-291-0/+144
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BeagleBone Black has P8 and P9 headers [0] which expose many of the AM3358 ZCZ SoC balls to stacking expansion boards called "capes", or to other external connections like jumper wires connected to a breadboard. BeagleBone users will often refer to the "Cape Exanpsion Headers" pin diagram [1] as it is in the "Bone101" getting started tutorial. [2] Most of the P8 and P9 header pins can muxed to a GPIO line. The gpio-line-names describe which P8 or P9 pin that line goes to and the default mux for that P8 or P9 pin if it is not GPIO. For example, gpiochip 1 line 0 is connected to P8 header pin 25 (P8_25) however the default device tree has the corresponding BGA ball (ZCZ U7) muxed to mmc1_dat0 as it is used for the on-board eMMC chip. For that GPIO line to be used, one would need to modify the device tree to disable the eMMC and change the pin mux for that ball to GPIO mode. Some of the AM3358 ZCZ balls corresponding to GPIO lines are not routed to a P8 or P9 header, but are instead wired to some peripheral device like on-board eMMC, HDMI framer IC, or status LEDs. Those names are in brackets to denote those GPIO lines can not be used. Some GPIO lines are named "[NC]" as the corresponding balls are not routed to anything on the PCB. The goal for these names is to make it easier for a user viewing the output of gpioinfo to determine which P8 or P9 pin is connected to a GPIO line. The output of gpioinfo on a BeagleBone Black would be: gpiochip0 - 32 lines: line 0: "[ethernet]" unused input active-high line 1: "[ethernet]" unused input active-high line 2: "P9_22 [spi0_sclk]" unused input active-high line 3: "P9_21 [spi0_d0]" unused input active-high line 4: "P9_18 [spi0_d1]" unused input active-high line 5: "P9_17 [spi0_cs0]" unused input active-high line 6: "[sd card]" "cd" input active-low [used] line 7: "P9_42A [ecappwm0]" unused input active-high line 8: "P8_35 [hdmi]" unused input active-high line 9: "P8_33 [hdmi]" unused input active-high line 10: "P8_31 [hdmi]" unused input active-high line 11: "P8_32 [hdmi]" unused input active-high line 12: "P9_20 [i2c2_sda]" unused input active-high line 13: "P9_19 [i2c2_scl]" unused input active-high line 14: "P9_26 [uart1_rxd]" unused input active-high line 15: "P9_24 [uart1_txd]" unused input active-high line 16: "[ethernet]" unused input active-high line 17: "[ethernet]" unused input active-high line 18: "[usb]" unused input active-high line 19: "[hdmi]" unused input active-high line 20: "P9_41B" unused input active-high line 21: "[ethernet]" unused input active-high line 22: "P8_19 [ehrpwm2a]" unused input active-high line 23: "P8_13 [ehrpwm2b]" unused input active-high line 24: "[NC]" unused input active-high line 25: "[NC]" unused input active-high line 26: "P8_14" unused input active-high line 27: "P8_17" unused input active-high line 28: "[ethernet]" unused input active-high line 29: "[ethernet]" unused input active-high line 30: "P9_11 [uart4_rxd]" unused input active-high line 31: "P9_13 [uart4_txd]" unused input active-high gpiochip1 - 32 lines: line 0: "P8_25 [emmc]" unused input active-high line 1: "[emmc]" unused input active-high line 2: "P8_5 [emmc]" unused input active-high line 3: "P8_6 [emmc]" unused input active-high line 4: "P8_23 [emmc]" unused input active-high line 5: "P8_22 [emmc]" unused input active-high line 6: "P8_3 [emmc]" unused input active-high line 7: "P8_4 [emmc]" unused input active-high line 8: "[NC]" unused input active-high line 9: "[NC]" unused input active-high line 10: "[NC]" unused input active-high line 11: "[NC]" unused input active-high line 12: "P8_12" unused input active-high line 13: "P8_11" unused input active-high line 14: "P8_16" unused input active-high line 15: "P8_15" unused input active-high line 16: "P9_15A" unused input active-high line 17: "P9_23" unused input active-high line 18: "P9_14 [ehrpwm1a]" unused input active-high line 19: "P9_16 [ehrpwm1b]" unused input active-high line 20: "[emmc]" unused input active-high line 21: "[usr0 led]" "beaglebone:green:heartbeat" output active-high [used] line 22: "[usr1 led]" "beaglebone:green:mmc0" output active-high [used] line 23: "[usr2 led]" "beaglebone:green:usr2" output active-high [used] line 24: "[usr3 led]" "beaglebone:green:usr3" output active-high [used] line 25: "[hdmi]" "interrupt" input active-high [used] line 26: "[usb]" unused input active-high line 27: "[hdmi audio]" "enable" output active-high [used] line 28: "P9_12" unused input active-high line 29: "P8_26" unused input active-high line 30: "P8_21 [emmc]" unused input active-high line 31: "P8_20 [emmc]" unused input active-high gpiochip2 - 32 lines: line 0: "P9_15B" unused input active-high line 1: "P8_18" unused input active-high line 2: "P8_7" unused input active-high line 3: "P8_8" unused input active-high line 4: "P8_10" unused input active-high line 5: "P8_9" unused input active-high line 6: "P8_45 [hdmi]" unused input active-high line 7: "P8_46 [hdmi]" unused input active-high line 8: "P8_43 [hdmi]" unused input active-high line 9: "P8_44 [hdmi]" unused input active-high line 10: "P8_41 [hdmi]" unused input active-high line 11: "P8_42 [hdmi]" unused input active-high line 12: "P8_39 [hdmi]" unused input active-high line 13: "P8_40 [hdmi]" unused input active-high line 14: "P8_37 [hdmi]" unused input active-high line 15: "P8_38 [hdmi]" unused input active-high line 16: "P8_36 [hdmi]" unused input active-high line 17: "P8_34 [hdmi]" unused input active-high line 18: "[ethernet]" unused input active-high line 19: "[ethernet]" unused input active-high line 20: "[ethernet]" unused input active-high line 21: "[ethernet]" unused input active-high line 22: "P8_27 [hdmi]" unused input active-high line 23: "P8_29 [hdmi]" unused input active-high line 24: "P8_28 [hdmi]" unused input active-high line 25: "P8_30 [hdmi]" unused input active-high line 26: "[emmc]" unused input active-high line 27: "[emmc]" unused input active-high line 28: "[emmc]" unused input active-high line 29: "[emmc]" unused input active-high line 30: "[emmc]" unused input active-high line 31: "[emmc]" unused input active-high gpiochip3 - 32 lines: line 0: "[ethernet]" unused input active-high line 1: "[ethernet]" unused input active-high line 2: "[ethernet]" unused input active-high line 3: "[ethernet]" unused input active-high line 4: "[ethernet]" unused input active-high line 5: "[i2c0]" unused input active-high line 6: "[i2c0]" unused input active-high line 7: "[emu]" unused input active-high line 8: "[emu]" unused input active-high line 9: "[ethernet]" unused input active-high line 10: "[ethernet]" unused input active-high line 11: "[NC]" unused input active-high line 12: "[NC]" unused input active-high line 13: "[usb]" unused input active-high line 14: "P9_31 [spi1_sclk]" unused input active-high line 15: "P9_29 [spi1_d0]" unused input active-high line 16: "P9_30 [spi1_d1]" unused input active-high line 17: "P9_28 [spi1_cs0]" unused input active-high line 18: "P9_42B [ecappwm0]" unused input active-high line 19: "P9_27" unused input active-high line 20: "P9_41A" unused input active-high line 21: "P9_25" unused input active-high line 22: "[NC]" unused input active-high line 23: "[NC]" unused input active-high line 24: "[NC]" unused input active-high line 25: "[NC]" unused input active-high line 26: "[NC]" unused input active-high line 27: "[NC]" unused input active-high line 28: "[NC]" unused input active-high line 29: "[NC]" unused input active-high line 30: "[NC]" unused input active-high line 31: "[NC]" unused input active-high [0] https://git.io/JfgOd [1] https://beagleboard.org/capes [1] https://beagleboard.org/Support/bone101 [2] https://beagleboard.org/static/images/cape-headers.png Reviewed-by: Jason Kridner <jason@beagleboard.org> Reviewed-by: Robert Nelson <robertcnelson@gmail.com> Signed-off-by: Drew Fustini <drew@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner2019-06-191-4/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* ARM: dts: Use - instead of @ for DT OPP entries for TI SoCsViresh Kumar2017-05-161-1/+1
| | | | | | | | | | | | | | | | | | Compiling the DT file with W=1, DTC warns like follows: Warning (unit_address_vs_reg): Node /opp_table0/opp@1000000000 has a unit name, but no reg property Fix this by replacing '@' with '-' as the OPP nodes will never have a "reg" property. Reported-by: Krzysztof Kozlowski <krzk@kernel.org> Reported-by: Masahiro Yamada <yamada.masahiro@socionext.com> Suggested-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpuDave Gerlach2017-03-231-0/+11
| | | | | | | | | | | | Although all PG2.0 silicon may not support 1GHz OPP for the MPU, older Beaglebone Blacks may have PG2.0 silicon populated and these particular parts are guaranteed to support the OPP, so enable it for PG2.0 on am335x-boneblack only. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> eviewed-by: Lukasz Majewski <lukma@denx.de> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: Move most of am335x-boneblack.dts to am335x-boneblack-common.dtsiRobert Nelson2017-01-021-154/+1
| | | | | | | | | This is going to be shared with the BeagleBone Black Wireless Signed-off-by: Robert Nelson <robertcnelson@gmail.com> CC: Tony Lindgren <tony@atomide.com> CC: Jason Kridner <jkridner@beagleboard.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-boneblack: Add blue-and-red-wiring -property to LCDC nodeJyri Sarha2016-11-171-0/+11
| | | | | | | | | | | | | | | | | | Add blue-and-red-wiring -property to LCDC node. Also adds comments on how to get support 24 bit RGB mode. After this patch am335x-boneblack support RGB565, BGR888, and XBGR8888 color formats. See details in Documentation/devicetree/bindings/display/tilcdc/tilcdc.txt. The BBB has straight color wiring from am335x to tda19988, however the tda19988 can be configured to cross the blue and red wires. The comments show how to do that with video-ports property of tda19988 node and how to tell LCDC that blue and red wires are crossed, with blue-and-red-wiring LCDC node property. This changes supported color formats from 16 bit RGB and 24 bit BGR to 16 bit BGR and 24 bit RGB. Signed-off-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* Merge tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds2016-10-111-4/+67
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull drm updates from Dave Airlie: "Core: - Fence destaging work - DRIVER_LEGACY to split off legacy drm drivers - drm_mm refactoring - Splitting drm_crtc.c into chunks and documenting better - Display info fixes - rbtree support for prime buffer lookup - Simple VGA DAC driver Panel: - Add Nexus 7 panel - More simple panels i915: - Refactoring GEM naming - Refactored vma/active tracking - Lockless request lookups - Better stolen memory support - FBC fixes - SKL watermark fixes - VGPU improvements - dma-buf fencing support - Better DP dongle support amdgpu: - Powerplay for Iceland asics - Improved GPU reset support - UVD/VEC powergating support for CZ/ST - Preinitialised VRAM buffer support - Virtual display support - Initial SI support - GTT rework - PCI shutdown callback support - HPD IRQ storm fixes amdkfd: - bugfixes tilcdc: - Atomic modesetting support mediatek: - AAL + GAMMA engine support - Hook up gamma LUT - Temporal dithering support imx: - Pixel clock from devicetree - drm bridge support for LVDS bridges - active plane reconfiguration - VDIC deinterlacer support - Frame synchronisation unit support - Color space conversion support analogix: - PSR support - Better panel on/off support rockchip: - rk3399 vop/crtc support - PSR support vc4: - Interlaced vblank timing - 3D rendering CPU overhead reduction - HDMI output fixes tda998x: - HDMI audio ASoC support sunxi: - Allwinner A33 support - better TCON support msm: - DT binding cleanups - Explicit fence-fd support sti: - remove sti415/416 support etnaviv: - MMUv2 refactoring - GC3000 support exynos: - Refactoring HDMI DCC/PHY - G2D pm regression fix - Page fault issues with wait for vblank There is no nouveau work in this tree, as Ben didn't get a pull request in, and he was fighting moving to atomic and adding mst support, so maybe best it waits for a cycle" * tag 'drm-for-v4.9' of git://people.freedesktop.org/~airlied/linux: (1412 commits) drm/crtc: constify drm_crtc_index parameter drm/i915: Fix conflict resolution from backmerge of v4.8-rc8 to drm-next drm/i915/guc: Unwind GuC workqueue reservation if request construction fails drm/i915: Reset the breadcrumbs IRQ more carefully drm/i915: Force relocations via cpu if we run out of idle aperture drm/i915: Distinguish last emitted request from last submitted request drm/i915: Allow DP to work w/o EDID drm/i915: Move long hpd handling into the hotplug work drm/i915/execlists: Reinitialise context image after GPU hang drm/i915: Use correct index for backtracking HUNG semaphores drm/i915: Unalias obj->phys_handle and obj->userptr drm/i915: Just clear the mmiodebug before a register access drm/i915/gen9: only add the planes actually affected by ddb changes drm/i915: Allow PCH DPLL sharing regardless of DPLL_SDVO_HIGH_SPEED drm/i915/bxt: Fix HDMI DPLL configuration drm/i915/gen9: fix the watermark res_blocks value drm/i915/gen9: fix plane_blocks_per_line on watermarks calculations drm/i915/gen9: minimum scanlines for Y tile is not always 4 drm/i915/gen9: fix the WaWmMemoryReadLatency implementation drm/i915/kbl: KBL also needs to run the SAGV code ...
| * Merge branch 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm ↵Dave Airlie2016-09-131-4/+67
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | into drm-next This adds the ASoC codec interfaces for TDA998x HDMI audio from Jyri Sarha. * 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: dts: am335x-boneblack: Add HDMI audio support drm/i2c: tda998x: Register ASoC hdmi-codec and add audio DT binding drm/i2c: tda998x: Improve tda998x_configure_audio() audio related pdata
| | * ARM: dts: am335x-boneblack: Add HDMI audio supportJyri Sarha2016-09-071-4/+67
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add HDMI audio support. Adds mcasp0_pins, clk_mcasp0_fixed, clk_mcasp0, mcasp0, sound node, and updates the tda19988 node to follow the new binding. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* | | Revert "ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpu"Dave Gerlach2016-09-141-11/+0
|/ / | | | | | | | | | | | | | | | | | | | | | | This reverts commit c36e6ec904876de1935b1d74d2d711e6f5ceb572. The original commit updated the cpufreq operating points tables for am335x-boneblack but was merged before the driver making use of the node was merged, which breaks the existing cpufreq implementation on the system, so revert the patch until the ti-cpufreq driver is merged. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* / ARM: dts: am335x-boneblack: Enable 1GHz OPP for cpuDave Gerlach2016-06-101-0/+11
|/ | | | | | | | | | | Although all PG2.0 silicon may not support 1GHz OPP for the MPU, older Beaglebone Blacks may have PG2.0 silicon populated and these particular parts are guaranteed to support the OPP, so enable it for PG2.0 on am335x-boneblack only. Signed-off-by: Dave Gerlach <d-gerlach@ti.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-boneblack: Use pinctrl constants and AM33XX_IOPAD macroAndrew F. Davis2015-11-301-22/+22
| | | | | | | | | | Using constants for pinctrl allows better readability and removes redundancy with comments. AM33XX_IOPAD allows us to use part of the pinctrl physical address as in the TRM instead of an offset. Signed-off-by: Andrew F. Davis <afd@ti.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-boneblack: Use new binding for HDMIJyri Sarha2015-07-141-5/+15
| | | | | | | Use new binding for the external tda19988 HDMI encoder. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* rtc: omap: drop vendor-prefix from power-controller dt propertyJohan Hovold2014-12-101-1/+1
| | | | | | | | | | | | | | | | | | | Drop the vendor-prefix from the "ti,system-power-controller" device-tree property name. It has been agreed to make "system-power-controller" a standard property and to drop the vendor-prefix that is currently used by several drivers. Note that drivers that have used "<vendor>,system-power-controller" in a released kernel will need to support both versions. Signed-off-by: Johan Hovold <johan@kernel.org> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ARM: dts: am335x-boneblack: enable power off and rtc wake upJohan Hovold2014-12-101-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Configure the RTC as system-power controller, which allows the system to be powered off as well as woken up again on subsequent RTC alarms. Note that the PMIC needs to be put in SLEEP (rather than OFF) mode to maintain RTC power. Specifically, this means that the PMIC ti,pmic-shutdown-controller property must be left unset in order to be able to wake up on RTC alarms. Tested on BeagleBone Black (rev A5). Signed-off-by: Johan Hovold <johan@kernel.org> Reviewed-by: Felipe Balbi <balbi@ti.com> Tested-by: Felipe Balbi <balbi@ti.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Tony Lindgren <tony@atomide.com> Cc: Benot Cousson <bcousson@baylibre.com> Cc: Lokesh Vutla <lokeshvutla@ti.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Keerthy J <j-keerthy@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* ARM: dts: am335x-bone*: Fix model name and update compatibility informationNishanth Menon2014-09-031-0/+5
| | | | | | | | | | | | | | | Beaglebone white and beaglebone black differ in tiny little aspects. This is the reason why we maintain seperate dts for these platforms. However, there is no real way to decode from dtb which platform it is since compatible and model name are the same for both platforms. Fix this so that beaglebone black and beaglebone are identifiable, while maintaining compatibility for older zImages which might use old beaglebone compatible flag for black as well. Reported-by: Tom Rini <trini@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: am335x-boneblack: remove use of ti,vcc-aux-disable-is-sleepJohan Hovold2014-05-051-1/+0
| | | | | | | | Remove use of property ti,vcc-aux-disable-is-sleep, which does not exist. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
* ARM: dts: AM33XX beagle black: add pinmux and hdmi node to enable displayDarren Etheridge2013-10-111-0/+48
| | | | | | | | | | Enable the hdmi output and the LCD Controller on BeagleBone Black. Also configure the correct pinmux for output of video data from the SoC to the HDMI encoder. Signed-off-by: Darren Etheridge <detheridge@ti.com> Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: am335x-boneblack: add eMMC DT entryKoen Kooi2013-10-111-0/+13
| | | | | | | | | | | The pinmux is specified in am335x-bone-common.dtsi to be reused by the eMMC cape. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Kevin Hilman <khilman@linaro.org> Reviewed-by: Nishanth Menon <nm@ti.com> [bcousson@baylibre.com: Fix traling spaces and useless comments] Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
* ARM: dts: am335x-bone*: add DT for BeagleBone BlackKoen Kooi2013-09-171-0/+17
The BeagleBone Black is basically a regular BeagleBone with eMMC and HDMI added, so create a common dtsi both can use. IMPORTANT: booting the existing am335x-bone.dts will blow up the HDMI transceiver after a dozen boots with an uSD card inserted because LDO will be at 3.3V instead of 1.8. MMC support for AM335x still isn't in, so only the LDO change has been added. Signed-off-by: Koen Kooi <koen@dominion.thruhere.net> Tested-by: Tom Rini <trini@ti.com> Tested-by: Matt Porter <matt.porter@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Tested-by: Kevin Hilman <khilman@linaro.org> Tested-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
generated by cgit (git 2.34.1) at 2025-02-26 15:58:33 +0000