aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/exynos5250.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: exynos: Align OPP table name with dt-schemaKrzysztof Kozlowski2020-09-161-1/+1
| | | | | | | | Device tree nodes should have hyphens instead of underscores. This is also expected by the bindings. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200903191438.12781-5-krzk@kernel.org
* ARM: dts: exynos: Silence SATA PHY warning in Exynos5250Krzysztof Kozlowski2020-09-061-0/+6
| | | | | | | | | | | | | | | | | | | | | The SATA PHY in Exynos5250 SoCs has two interfaces and two device nodes: 1. sata-phy@12170000 2. i2c-9/i2c@38 The first node represents the actual SATA PHY device with phy-cells. The second represents an additional I2C interface, needed by the driver to communicate with the SATA PHY device. It is not a PHY-provider in the terms of dtschema so rename it to silence dtbs_check warning: arch/arm/boot/dts/exynos5250-arndale.dt.yaml: sata-phy@38: '#phy-cells' is a required property From schema: lib/python3.6/site-packages/dtschema/schemas/phy/phy-provider.yaml This second device node is also a property of SoC, not a board so move it there. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200902155733.20271-2-krzk@kernel.org
* ARM: dts: exynos: Override thermal by label in Exynos5250Krzysztof Kozlowski2020-09-031-20/+18
| | | | | | | | | | | | | Using full paths to extend or override a device tree node is error prone since if there was a typo error, a new node will be created instead of extending the node as it was desired. This will lead to run-time errors that could be hard to detect. A mistyped label on the other hand, will cause a dtc compile error (during build time). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-8-krzk@kernel.org
* ARM: dts: exynos: Correct whitespace and indentation issues in Exynos5Krzysztof Kozlowski2020-09-031-4/+4
| | | | | | | | Remove double space after '=' and fix indentation in Exynos5250, Exynos5410 and Exynos5420 DTS files. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20200901075417.22481-7-krzk@kernel.org
* ARM: dts: exynos: Remove DMA controller bus node name to fix dtschema warningsKrzysztof Kozlowski2020-07-071-50/+42
| | | | | | | | | | | There is no need to keep DMA controller nodes under AMBA bus node. Remove the "amba" node to fix dtschema warnings like: amba: $nodename:0: 'amba' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$' Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
* Merge tag 'samsung-dt-5.6' of ↵Olof Johansson2020-01-111-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt Samsung DTS ARM changes for v5.6 1. Couple ARM and wcore bus regulators on Exynos542x so higher frequencies could be used with dynamic voltage and frequency scaling. Enable this higher frequencies. 2. Correct the polarity of USB3503 hub GPIOs. 3. Adjust the bus frequencies (scaled with devfreq framework) on Exynos5422 Odroid boards to match values possible to obtain from root PLLs. 4. Add display to Tiny4412 board. 5. Cleanups and minor improvements. * tag 'samsung-dt-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: ARM: dts: exynos: Enable FIMD node and add proper panel node to Tiny4412 ARM: dts: samsung: Rename Samsung and Exynos to lowercase ARM: dts: exynos: Adjust bus related OPPs to the values correct for Exynos5422 Odroids ARM: dts: exynos: Move Exynos5420 bus related OPPs to the Odroid boards DTS ARM: dts: exynos: Correct USB3503 GPIOs polarity ARM: dts: exynos: Add missing CPU frequencies for Exynos5422/5800 ARM: dts: exynos: Add initial data for coupled regulators for Exynos5422/5800 ARM: dts: exynos: Remove syscon compatible from chipid node on Exynos5 Link: https://lore.kernel.org/r/20200110172334.4767-3-krzk@kernel.org Signed-off-by: Olof Johansson <olof@lixom.net>
| * ARM: dts: samsung: Rename Samsung and Exynos to lowercaseKrzysztof Kozlowski2020-01-071-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fix up inconsistent usage of upper and lowercase letters in "Samsung" and "Exynos" names. "SAMSUNG" and "EXYNOS" are not abbreviations but regular trademarked names. Therefore they should be written with lowercase letters starting with capital letter. The lowercase "Exynos" name is promoted by its manufacturer Samsung Electronics Co., Ltd., in advertisement materials and on website. Although advertisement materials usually use uppercase "SAMSUNG", the lowercase version is used in all legal aspects (e.g. on Wikipedia and in privacy/legal statements on https://www.samsung.com/semiconductor/privacy-global/). Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* | ARM: dts: exynos: Rename children of SysRAM node to "sram"Krzysztof Kozlowski2019-10-231-2/+2
|/ | | | | | | | The device node name should reflect generic class of a device so rename the children of SysRAM node to "smp-sram". This will be also in sync with upcoming DT schema. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Rename SysRAM node to "sram"Krzysztof Kozlowski2019-10-061-1/+1
| | | | | | | | | The device node name should reflect generic class of a device so rename the SysRAM node from "sysram" to "sram". The child nodes stay as before as "smp-sysram" to match their real purpose. This will be also in sync with upcoming DT schema. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Use defines for MCT interrupt GIC SPI/PPI specifierKrzysztof Kozlowski2019-10-021-2/+2
| | | | | | | | Replace hard-coded number with appropriate define for GIC SPI or PPI specifier in interrupt. This makes code easier to read. No expected functionality change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Remove MCT subnode for interrupt map on Exynos5250Krzysztof Kozlowski2019-10-021-17/+6
| | | | | | | | | | Multi Core Timer node has interrupts routed to two different parents - GIC and combiner. This was modeled with a interrupt-map within a subnode but can be expressed in an easier and more common way, directly in the node itself. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
* ARM: dts: exynos: Rename Multi Core Timer node to "timer"Krzysztof Kozlowski2019-10-021-1/+1
| | | | | | | | The device node name should reflect generic class of a device so rename the Multi Core Timer node from "mct" to "timer". This will be also in sync with upcoming DT schema. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Split phandle in dmas propertyMaciej Falkowski2019-10-021-7/+7
| | | | | | | | | Change representation of phandle array as then dt-schema counts number of its items properly. Signed-off-by: Maciej Falkowski <m.falkowski@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* Merge tag 'usb-5.4-rc1' of ↵Linus Torvalds2019-09-181-12/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.4-rc1. Two major chunks of code are moving out of the tree and into the staging directory, uwb and wusb (wireless USB support), because there are no devices that actually use this protocol anymore, and what we have today probably doesn't work at all given that the maintainers left many many years ago. So move it to staging where it will be removed in a few releases if no one screams. Other than that, lots of little things. The usual gadget and xhci and usb serial driver updates, along with a bunch of sysfs file cleanups due to the driver core changes to support that. Nothing really major, just constant forward progress. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: usbcore: Fix slab-out-of-bounds bug during device reset usb: cdns3: Remove redundant dev_err call in cdns3_probe() USB: rio500: Fix lockdep violation USB: rio500: simplify locking usb: mtu3: register a USB Role Switch for dual role mode usb: common: add USB GPIO based connection detection driver usb: common: create Kconfig file usb: roles: get usb-role-switch from parent usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h dt-bindings: usb: mtu3: add properties about USB Role Switch dt-bindings: usb: add binding for USB GPIO based connection detection driver dt-bindings: connector: add optional properties for Type-B dt-binding: usb: add usb-role-switch property usbip: Implement SG support to vhci-hcd and stub driver usb: roles: intel: Enable static DRD mode for role switch xhci-ext-caps.c: Add property to disable Intel SW switch usb: dwc3: remove generic PHY calibrate() calls usb: core: phy: add support for PHY calibration ...
| * ARM: dts: exynos: Use standard arrays of generic PHYs for EHCI/OHCI devicesMarek Szyprowski2019-07-301-12/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | Move USB PHYs to a standard arrays for Exynos EHCI/OHCI devices. This resolves the conflict between Exynos EHCI/OHCI sub-nodes and generic USB device bindings. Once the Exynos EHCI/OHCI sub-nodes are removed, the boards can finally provide sub-nodes for the USB devices using generic USB device bindings. Suggested-by: Måns Rullgård <mans@mansr.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20190726081453.9456-4-m.szyprowski@samsung.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | ARM: dts: exynos: Add GPU/Mali T604 node to Exynos5250Guillaume Gardet2019-09-041-0/+47
| | | | | | | | | | | | | | Add nodes for GPU (Mali T604) to Exynos5250. Signed-off-by: Guillaume Gardet <guillaume.gardet@arm.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* | ARM: dts: exynos: Add port map to Exynos5250 AHCI nodeMarek Szyprowski2019-08-071-0/+1
|/ | | | | | | | | | | Exynos AHCI (SATA) controller has only one port for SATA device. According to AHCI driver bindings (ata/ahci-platform.txt), if the bootloader doesn't program the PORTS_IMPL register to proper value, the available port map has to be provided by 'ports-implemented' device tree property. This fixes SATA operation on Exynos5250-based boards since Linux v4.5. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Move pmu and timer nodes out of socKrzysztof Kozlowski2019-04-241-20/+20
| | | | | | | | | | | | | | The ARM PMU and ARM architected timer nodes are part of ARM CPU design therefore they should not be inside the soc node. This also fixes DTC W=1 warnings like: arch/arm/boot/dts/exynos3250.dtsi:106.21-135.5: Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property arch/arm/boot/dts/exynos3250.dtsi:676.7-680.5: Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
* ARM: dts: exynos: Add all CPUs in cooling mapsViresh Kumar2018-11-181-3/+4
| | | | | | | | | | | | | | | | | | | Each CPU can (and does) participate in cooling down the system but the DT only captures a handful of them, normally CPU0, in the cooling maps. Things work by chance currently as under normal circumstances its the first CPU of each cluster which is used by the operating systems to probe the cooling devices. But as soon as this CPU ordering changes and any other CPU is used to bring up the cooling device, we will start seeing failures. Also the DT is rather incomplete when we list only one CPU in the cooling maps, as the hardware doesn't have any such limitations. Update cooling maps to include all devices affected by individual trip points. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Mark 1 GHz CPU OPP as suspend OPP on Exynos5250Marek Szyprowski2018-08-291-0/+1
| | | | | | | | | | | | | | | 1 GHz CPU OPP is the default boot value for the Exynos5250 SOC, so mark it as suspend OPP. This fixes suspend/resume on Samsung Exynos5250 Snow Chomebook, which was broken since switching to generic cpufreq-dt driver in v4.3. Cc: <stable@vger.kernel.org> # 4.3.x: cd6f55457eb4: ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes Cc: <stable@vger.kernel.org> # 4.3.x: 672f33198bee: arm: dts: exynos: Add missing cooling device properties for CPUs Cc: <stable@vger.kernel.org> # 4.3.x Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Convert exynos5250.dtsi to opp-v2 bindingsMarek Szyprowski2018-08-291-42/+88
| | | | | | | | | | | | | Convert Exynos5250 to OPP-v2 bindings. This is a preparation to add proper support for suspend operation point, which cannot be marked in opp-v1. Cc: <stable@vger.kernel.org> # 4.3.x: cd6f55457eb4: ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodes Cc: <stable@vger.kernel.org> # 4.3.x: 672f33198bee: arm: dts: exynos: Add missing cooling device properties for CPUs Cc: <stable@vger.kernel.org> # 4.3.x Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add DSI node on Exynos5250Andrzej Hajda2018-08-291-0/+21
| | | | | | | | | Add common part of DSI node for Exynos5250 platforms and a required mipi-phy node. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Maciej Purski <m.purski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: remove no longer needed samsung thermal propertiesBartlomiej Zolnierkiewicz2018-06-251-1/+1
| | | | | | | | | Remove no longer needed samsung thermal properties. There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* arm: dts: exynos: Add missing cooling device properties for CPUsViresh Kumar2018-06-251-0/+23
| | | | | | | | | | | | | | | | | | The cooling device properties, like "#cooling-cells" and "dynamic-power-coefficient", should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can register a cooling device. Add such missing properties. Fix other missing properties (clocks, OPP, clock latency) as well to make it all work. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos/s3c: Remove leading 0x and 0s from bindings notationMathieu Malaterre2018-05-031-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Improve the DTS files by removing all the leading "0x" and zeros to fix the following dtc warnings: Warning (unit_address_format): Node /XXX unit name should not have leading "0x" Warning (unit_address_format): Node /XXX unit name should not have leading 0s Converted using the following command: find arch/arm/boot/dts -type f \( -iname "*.dts" -o -iname "*.dtsi" \) -exec sed -i \ -e "s/@\([0-9a-fA-FxX\.;:#]\+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 \ {/g" -e "s/@0\+\(.\+\) {/@\1 {/g" {} + For simplicity, two sed expressions were used to solve each warnings separately. To make the regex expression more robust a few other issues were resolved, namely setting unit-address to lower case, and adding a whitespace before the the opening curly brace: https://elinux.org/Device_Tree_Linux#Linux_conventions This will solve also a side effect warning: Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>" This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation") Reported-by: David Daney <ddaney@caviumnetworks.com> Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Mathieu Malaterre <malat@debian.org> [krzk: Rerun the command to include few more changes, adjust the commit msg] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Move syscon poweroff and restart nodes under the PMUKrzysztof Kozlowski2018-04-211-0/+1
| | | | | | | | | The PMU node is the actual block responsible for power management, including typical Exynos on/off/restart procedures. Therefore the syscon poweroff and restart nodes logically belong to it. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
* ARM: dts: exynos: Remove obsolete clock properties from power domainsMarek Szyprowski2018-04-171-4/+0
| | | | | | | | | | Handling of special clock operations on power domain on/off sequences has been moved to respective Exynos clock controller drivers and clock properties have been marked as deprecated. Remove all clock properties from existing Exynos power domain nodes, as they are no longer used. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add #sound-dai-cells property to exynos5250 i2s nodesSylwester Nawrocki2018-03-141-0/+3
| | | | | | | | | The #sound-dai-cells property may be required to reference the CPU DAI properly. This change is required for Snow HDMI audio. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Enable HDMI audio on Snow ChromebookSylwester Nawrocki2018-03-111-0/+1
| | | | | | | | | This patch adds new cpu, codec subnodes according to the updated "google,snow-audio-max98095" DT bindings and the I2S clock tree configuration so sound on the HDMI interface can also be supported. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add #sound-dai-cells property to hdmi node in exynos5250.dtsiSylwester Nawrocki2018-03-111-0/+1
| | | | | | | | This property is required for specifying link between the HDMI IP block and the SoC's audio subsystem. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Fix IOMMU support for GScaler devices on Exynos5250Marek Szyprowski2018-03-051-4/+4
| | | | | | | | | | | | The proper name for the property, which assign given device to IOMMU is 'iommus', not 'iommu'. Fix incorrect name and let all GScaler devices to be properly handled when IOMMU support is enabled. Reported-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Fixes: 6cbfdd73a94f ("ARM: dts: add sysmmu nodes for exynos5250") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Remove "cooling-{min|max}-level" for CPU nodesViresh Kumar2018-02-131-2/+0
| | | | | | | | | | | The "cooling-min-level" and "cooling-max-level" properties are not parsed by any part of the kernel currently and the max cooling state of a CPU cooling device is found by referring to the cpufreq table instead. Remove the unused properties from the CPU nodes. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add SPDX license identifiersKrzysztof Kozlowski2018-01-031-5/+2
| | | | | | Replace GPL v2.0 license statements with SPDX license identifiers. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Use lower case hex addresses in node unit addressesKrzysztof Kozlowski2017-12-181-33/+33
| | | | | | | | | | | | | | Convert all hex addresses in node unit addresses to lower case to fix warnings like: arch/arm/boot/dts/exynos5422-odroidhc1.dtb: Warning (simple_bus_reg): Node /soc/nocp@10CA1000 simple-bus unit address format error, expected "10ca1000" Conversion was done using sed: $ sed -e 's/@\([a-zA-Z0-9_-]*\) {/@\L\1 {/' -i arch/arm/boot/dts/exynos*.dts* Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add nodes for True Random Number GeneratorŁukasz Stelmach2017-12-141-0/+5
| | | | | | | | Add nodes for the True Random Number Generator found in Samsung Exynos 5250+ SoCs. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add DT nodes for PRNG in Exynos5 SoCsŁukasz Stelmach2017-12-111-0/+5
| | | | | | | | Add nodes for Pseudo Random Number Generator in dts files describing Exynos5 chips. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add G3D power domain to Exynos5250Marek Szyprowski2017-12-101-0/+7
| | | | | | | | Add support for G3D power domain, which contains ARM Mali-600MP graphics accelerator device (not yet instantiated). Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add audio power domain to Exynos5250Marek Szyprowski2017-12-101-0/+12
| | | | | | | | Audio power domain includes following hardware modules: Pin controller for GPZ bank, AudioSS clock controller and three Exynos I2S controller. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Fix power domain node names for Exynos5250Marek Szyprowski2017-12-101-3/+3
| | | | | | | | Device nodes in device tree should use generic names, so rename all existing domains to "power-domain". Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Move G2D node to exynos5.dtsiTobias Jakobi2017-12-041-9/+7
| | | | | | | | | | | | | | | | Current the node is only defined in the exynos5250 DT, while the corresponding SYSMMUs are also to be found in the exynos5420 DT. Move the node to exynos5 and only setup the SYSMMUs in the corresponding DT. Disable the node by default, since exynos5410 also includes the dtsi, but currently does not define the G2D clock. Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de> [mszyprow: rephrased commit message] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Remove duplicate definitions of SSS nodes for Exynos5Łukasz Stelmach2017-11-271-8/+5
| | | | | | | | Move Security Subsystem nodes common for Exynos5250 and Exynos54xx to exynos5.dtsi to avoid duplication. Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* Merge tag 'samsung-dt-4.15' of ↵Arnd Bergmann2017-10-201-5/+13
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/soc Pull "Samsung DTS ARM changes for 4.15" from Krzysztof Kozłowski: 1. Add new board: Hardkernel Odroid HC1. 2. Fix incomplete Odroid-XU3/4 thermal-zones definition leading to possible overheat if first pair of A7+A15 cores is idle but rest of CPUs are busy. 3. Add capacity-dmips-mhz properties for CPUs of octa-core SoCs. 4. Add power button to Odroid XU3/4. 5. Improvements in Gscaler, HDMI and Mixer blocks on Exynos5. 6. Add suspend quirk to DWC3 USB controller to fix enumeration of SuperSpeed devices on Odroid XU4. 7. Add HDMI and MHL to Trats2. 8. Cleanups (redundant properties and nodes). * tag 'samsung-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: dt-bindings: samsung: Document binding for new Odroid HC1 board ARM: dts: exynos: Add HDMI and Sil9234 to Trats2 board ARM: dts: exynos: Add support for Hardkernel's Odroid HC1 board ARM: dts: exynos: Move audio clocks configuration to odroidxu3-audio.dtsi ARM: dts: exynos: Add dwc3 SUSPHY quirk ARM: dts: exynos: Add status property to Exynos 542x Mixer nodes ARM: dts: exynos: Add status property to Exynos 5250 HDMI and Mixer nodes ARM: dts: exynos: Cleanup HDMI DCC definitions on Exynos5250 and Exynos542x boards ARM: dts: exynos: Move HDMI PHY node from boards to exynos5250.dtsi ARM: dts: exynos: Use specific compatibles for proper Gscaler limits on Exynos5250 and Exynos5420 ARM: dts: exynos: Remove redundant interrupt properties in gpio-keys on Odroid boards ARM: dts: exynos: Add power button for Odroid XU3/4 ARM: dts: exynos: Remove the display-timing and delay from Rinato ARM: dts: exynos: add exynos5422 cpu capacity-dmips-mhz information ARM: dts: exynos: add exynos5420 cpu capacity-dmips-mhz information ARM: dts: exynos: fix incomplete Odroid-XU3/4 thermal-zones definition
| * ARM: dts: exynos: Add status property to Exynos 5250 HDMI and Mixer nodesMarek Szyprowski2017-09-191-1/+3
| | | | | | | | | | | | | | | | | | | | HDMI support requires some additional off-SoC logic, so HDMI and Mixer devices should be disabled by default in SoC dtsi and enabled then in each board dts. This patch unifies HDMI and Mixer handling with other Exynos SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
| * ARM: dts: exynos: Move HDMI PHY node from boards to exynos5250.dtsiMarek Szyprowski2017-09-191-0/+6
| | | | | | | | | | | | | | | | | | All Exynos 5250 SoCs have HDMI PHY connected via dedicated I2C bus (bus number 8), so HDMI PHY should be defined in exynos5250.dtsi instead of duplicating it in every board, which enables HDMI support. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
| * ARM: dts: exynos: Use specific compatibles for proper Gscaler limits on ↵Hoegeun Kwon2017-09-191-4/+4
| | | | | | | | | | | | | | | | | | | | | | Exynos5250 and Exynos5420 Exynos 5250 and 5420 have different hardware rotation limits. However, currently it uses only one compatible - "exynos5-gsc". Since we have to distinguish between these two, we add different compatible. Signed-off-by: Hoegeun Kwon <hoegeun.kwon@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* | arm: dts: fix unit-address leading 0sRob Herring2017-10-201-3/+3
|/ | | | | | | | | | | | | Fix dtc warnings for 'simple_bus_reg' due to leading 0s. Converted using the following command: perl -p -i -e 's/\@0+([0-9a-f])/\@$1/g' `find arch/arm/boot/dts -type -f -name '*.dts*' Dropped changes to ARM, Ltd. boards LED nodes and manually fixed up some occurrences of uppercase hex. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* ARM: dts: exynos: Use human-friendly symbols for GIC interrupt propertiesKrzysztof Kozlowski2017-06-071-4/+4
| | | | | | | | Replace hard-coded values of type of GIC interrupt and its flags with respective macros from header to increase code readability. Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add HDMI CEC device to Exynos5 SoC familyMarek Szyprowski2017-06-021-0/+13
| | | | | | | | | | | Exynos5250 and Exynos542x SoCs have the same CEC hardware module as Exynos4 SoC series, so enable support for it using the same compatible string. Tested on Odroid XU3 (Exynos5422) and Google Snow (Exynos5250) boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Add labels to all existing power domainsMarek Szyprowski2017-01-311-0/+3
| | | | | | | Provide human readable names for all power domains defined in Exynos SoCs. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
* ARM: dts: exynos: Enable DMA support for UART modules on Exynos5 SoCsMarek Szyprowski2016-12-291-0/+8
| | | | | | | | | | | UART modules can use DMA for offloading data transfers and reducing interrupts, so enable this feature for Exynos5 boards. Tested on Google ChromeBook Snow (Exynos5250), Odroid XU (Exynos5410) and Odroid XU3 (Exynos5422) boards. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
generated by cgit (git 2.34.1) at 2025-02-27 16:35:08 +0000