aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot/dts/stm32mp157-pinctrl.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: stm32: Update stm32mp157 pinctrl filesAlexandre Torgue2019-12-091-1087/+0
| | | | | | | | In order to cover the STM32MP15 SOCs family this commit updates pinctrl file names (group definition and packages files). This family includes: STM32MP151, STM32MP153 and STM32MP157. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: Adapt stm32mp157 pinctrl to manage STM32MP15xx SOCs familyAlexandre Torgue2019-12-091-1230/+1077
| | | | | | | | This commit modifies stm32mp157 pinctrl files to better manage STM32MP15xx SOCs diversity. Pin controller and gpio controller are moved to common SOC dtsi file. Only pin groups remain in the main pinctrl dtsi file. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add ADC pins used for stm32mp157c-ed1Fabrice Gasnier2019-12-091-0/+6
| | | | | | | Define adc1_in6 pin used on stm32mp157c eval board. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add sdmmc3 node for STM32MP1 boardsYann Gautier2019-12-091-0/+54
| | | | | | | | | | On STM32MP1 EVAL and DISCOVERY boards, the SDMMC3 internal peripheral can be used through the GPIO extension connector. The sdmmc3 node is then added in the boards DT files, and the required pins are also added. The node status is disabled as there is no device connected by default. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Yann Gautier <yann.gautier@st.com>
* ARM: dts: stm32: enable sdmmc2 node for stm32mp157c-ed1 boardYann Gautier2019-12-091-0/+118
| | | | | | | | | | On STM32MP157C-ED1, the eMMC is connected on instance 2 of SDMMC peripheral. The sdmmc2 node is then added in the board DT file, as well as the pins nodes in the pinctrl file. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: update slew-rate properties for sdmmc1 on stm32mp157Yann Gautier2019-12-091-9/+19
| | | | | | | | Relax sdmmc1 pins slew-rate to minimize peak currents. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Yann Gautier <yann.gautier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add pwm pin muxing for stm32mp157a-dk1Fabrice Gasnier2019-12-091-0/+81
| | | | | | | Add all PWM pinctrl definitions that can be used on stm32mp157a-dk1 board. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add pwm sleep pin muxing for stm32mp157c-ev1Fabrice Gasnier2019-12-091-0/+18
| | | | | | | | Add PWM pinctrl definitions used in low-power (sleep) mode on stm32mp157c-ev1. Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2019-12-051-0/+28
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM Device-tree updates from Olof Johansson: "As always, the bulk of updates. Some of the news this cycle: New SoC descriptions: - Broadcom BCM2711 - Amlogic Meson A1 and G12 - Freescale S32V234 - Marvell Armada AP807/AP807-quad and CP115 - Realtek RTD1293 and RTD1296 - Rockchip RK3308 New boards and platforms: - Allwinner: NanoPi Duo2 - Amlogic: Ugoos am6 - Atmel at91: Overkiz Kizbox2/4 - Broadcom: RPi4, Luxul XWC-2000 - Marvell: New Espressobin flavor - NXP: i.MX8MN LPDDR4 EVK, i.MX8QXP Colibri, S32V234 EVB, Netronix E60K02 and Kobo Clara HD, Kontron N6311 and N6411, OPOS6UL and OPOS6ULDev - Renesas: Salvator-XS - Rockchip: Beelink A1 (rk3308), rk3308 eval boards, rk3399-roc-pc" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (653 commits) ARM: dts: logicpd-torpedo: Disable USB Host arm: dts: mt6323: add keys, power-controller, rtc and codec arm64: dts: mt8183: add systimer0 device node dt-bindings: mediatek: update bindings for MT8183 systimer arm64: dts: rockchip: fix sdmmc detection on boot on rk3328-roc-cc arm64: dts: rockchip: Split rk3399-roc-pc for with and without mezzanine board. arm64: dts: rockchip: Add Beelink A1 dt-bindings: ARM: rockchip: Add Beelink A1 arm64: dts: rockchip: Add RK3328 audio pipelines arm64: dts: ti: k3-j721e-common-proc-board: Add USB ports arm64: dts: ti: k3-j721e-main: add USB controller nodes ARM: dts: aspeed-g6: Add timer description ARM: dts: aspeed: ast2600evb: Enable i2c buses ARM: dts: at91: add a dts and dtsi file for kizbox2 based boards dt-bindings: arm: at91: Document Kizbox2-2 board binding arm64: dts: meson-gx: fix i2c compatible arm64: dts: meson-gx: cec node should be disabled by default arm64: dts: meson-g12b-odroid-n2: add missing amlogic, s922x compatible arm64: dts: meson-gxm: fix gpu irq order arm64: dts: meson-g12a: fix gpu irq order ...
| * ARM: dts: stm32: Add DAC pins used on stm32mp157c-ed1Fabrice Gasnier2019-10-251-0/+12
| | | | | | | | | | | | | | | | | | Define pins that can be used by digital-to-analog converter on stm32mp157c eval daughter board: - PA4 and PA5 pins are available respectively on JP11 and JP10 Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| * ARM: dts: stm32: add ADC pins used on stm32mp157a-dk1Fabrice Gasnier2019-10-251-0/+16
| | | | | | | | | | | | | | | | | | Define pins that can be used for ADC on stm32mp157a-dk1 board: - AIN connector has ADC input pins - USB Type-C CC1 & CC2 pins (e.g. in18, in19) Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* | ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157Patrice Chotard2019-10-251-4/+4
|/ | | | | | | | | | | Relax qspi pins slew-rate to minimize peak currents. Fixes: 844030057339 ("ARM: dts: stm32: add flash nor support on stm32mp157c eval board") Link: https://lore.kernel.org/r/20191025130122.11407-1-alexandre.torgue@st.com Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by: Olof Johansson <olof@lixom.net>
* ARM: dts: stm32: remove useless pinctrl entries in stm32mp157-pinctrlAlexandre Torgue2019-08-021-24/+0
| | | | | | | | This patch removes "ngpios" and "gpio-ranges" information from stm32mp157-pinctrl.dtsi file as it is now filled in stm32mp157 pinctrl package files. Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: fix -Wall W=1 compilation in stm32mp157 pinctrl for mcanErwan Le Ray2019-08-021-1/+1
| | | | | | | | Fix compilations warnings detected by -Wall W=1 compilation option: - node has a unit name, but no reg property Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add FMC2 NAND controller pins muxing on stm32mp157c-ev1Christophe Kerello2019-07-251-0/+44
| | | | | | | This patch adds FMC2 NAND controller pins muxing used on stm32mp157c-ev1. Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: Add missing pinctrl definitions for STM32MP157Manivannan Sadhasivam2019-06-211-0/+75
| | | | | | | Add missing pinctrl definitions for STM32MP157 MPU. Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add DCMI pins to stm32mp157cHugues Fruchet2019-05-211-0/+41
| | | | | | | Add DCMI pins to stm32mp157c. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add i2s pins muxing on stm32mp157Olivier Moysan2019-05-211-0/+19
| | | | | | | Add I2S pins muxing to stm32mp157. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add sai pins muxing on stm32mp157Olivier Moysan2019-05-211-0/+73
| | | | | | | Add SAI pins muxing to stm32mp157. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add pinctrl sleep config for qspi on stm32mp157c-ev1Ludovic Barre2019-05-211-0/+26
| | | | | | | This patch adds pinctrl sleep config for qspi on stm32mp157c-ev1 Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: use dedicated files to manage stm32mp157 packagesAlexandre Torgue2019-05-211-0/+12
| | | | | | | | | | | | | | | | Four packages exist for stm32mp157 die. As ball-out is different between them, this patch covers those differences by creating dedicated pinctrl dtsi files. Each dtsi pinctrl package file describes the package ball-out through gpio-ranges. stm32mp157a-dk1 / dk2 boards embed a STM32MP_PKG_AC (TFBGA361 (12*12)) package. stm32mp157c-ed1 / ev1 boards embed a STM32MP_PKG_AA (LFBGA448 (18*18)) package. Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add cec pins muxing on stm32mp157Yannick Fertré2019-04-111-0/+21
| | | | | | | Add a new pin muxing for cec. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add ltdc pins muxing on stm32mp157Yannick Fertré2019-04-111-0/+138
| | | | | | | Add ltdc pins muxing on stm32mp157. Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add I2C sleep pins muxing on stm32mp157Yannick Fertré2019-04-111-0/+29
| | | | | | | | Add I2C sleep pins muxing for low power mode. Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Yannick Fertré <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add spdfirx pins to stm32mp157cOlivier Moysan2019-04-111-0/+13
| | | | | | | This patch adds spdifrx support on stm32mp157c eval board. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add sdmmc1 support on stm32mp157c ed1 boardLudovic Barre2019-04-111-0/+68
| | | | | | | This patch adds sdmmc1 support on stm32mp157c ed1 board. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add can1 sleep pins muxingBich HEMON2018-12-031-0/+7
| | | | | | | Add can1 pinctrl definition for low-power mode Signed-off-by: Bich Hemon <bich.hemon@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add support of ethernet on stm32mp157c-ev1Christophe Roullier2018-07-131-0/+46
| | | | | | | MAC is connected to a PHY in RGMII mode. Signed-off-by: Christophe Roullier <christophe.roullier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add SPI1 support on stm32mp157c-ev1Amelie Delaunay2018-07-131-1/+15
| | | | | | | | | This patch adds SPI1 support on stm32mp157c-ev1 board. SPI1 is available on GPIO expansion connector but kept disabled so these pins can be used as GPIOs by default. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: m_can activation on stm32mp157c-ev1Erwan Le Ray2018-06-251-0/+13
| | | | | | | | | Add activation of the Controller Area Network m_can on stm32mp157c-ev1 board. Signed-off-by: Bich Hemon <bich.hemon@st.com> Signed-off-by: Erwan Le Ray <erwan.leray@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2018-06-111-15/+136
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Olof Johansson: "As always, a large number of DT updates. Too many to enumerate them all, but at a glance: New SoCs introduced in this release: - Amlogic: + Meson 8M2 SoC, a.k.a. S812. A quad Cortex-A9 SoC used in some set top boxes and other products. - Mediatek: + MT7623A, which is a flavor of the MT7623 family with other on-chip ethernet options. - Qualcomm: + SDM845, a.k.a Snapdragon 845, an 4+4-core Kryo 385/845 (Cortex-A75/A55 derivative) SoC that's one of the current high-end mobile SoCs. It's great to see mainline support for it. So far, you can't do much with it, since a lot of peripherals are not yet in the DTs but driver support for USB, GPU and other pieces are starting to trickle in. This might end up being a well-supported SoC upstream if the momentum keeps up. - Renesas: + R8A77990, a.k.a R-Car E3, a new automotive entertainment-targeted SoC. Currently only one Cortex-A53 CPU is enabled, we are eagerly awaiting more. So far, basic drivers such as serial, gpios, PMU and ethernet are enabled. + R8A77470, a.k.a. RZ/G1C, a new dual Cortex-A7 SoC with PowerVR GPU. Same here, basic set of drivers such as serial, gpios and ethernet enabled, and SMP support is also forthcoming. - STMicroelectronics: + STM32F469, very similar tih STM32F429 but with display support Enhancements to SoCs/platforms (DTS contents, some driver portions might not be in yet): - Allwinner sun8i (h3/a33/a83t) SMP, DVFS tweaks, misc - Amlogic Meson: I2C, UFS, TDM, GPIO external interrupts, MMC resets - Hisilicon hi3660: Thermal cooling, CPU frequency scaling, mailbox interfaces - Marvell Berlin2CD: SMP support, thermal sensors - Mediatek MT7623: Highspeed DMA, audio support - Qualcomm IPQ8074 PCIe support, MSM8996 UFS support - Renesas: Watchdog and PMU support across many platforms - Rockchip RK3399: USB3 OTG support - Samsung Exynos: Audio-over-HDMI on Odroid X/X2/U3 - STMicro STM32: Lots of peripherals added to STM32MP175C - Uniphier: Ethernet support New boards: - Allwinner A20: Olimex A20-SOM-EVB-eMMC variant - Allwinner H2+: Libre Computer ALL-H3-CC (h2+ version) - Allwinner A33: Nintendo NES/SuperNES Classic Edition - Aspeed: S2600WF, Inventec Lanyang BMC, Portwell Neptune - Berlin2CD: Valve Steam Link - Broadcom BCM5301X: Luxul XAP-1610 and XWR-3150 V1 - Broadcom: Raspberry Pi 3 B+ - Mediatek MT7623N and MT7623A: reference boards - Meson 8M2: Tronsmart MXIII Plus - NXP i.MX: Engicam i.CoreM6, DHCOM iMX6 SOM, BTicino i.MX6DL Mamoj - Qualcomm MSM8974: Sony Xperia Z1 Compact support - Qualcomm SDM845: MTP development board - Renesas: Ebisu R8A77990 board - Renesas RZ/G1C: iwg23s: iWave G235-SDB - TI am335x: Pocketbeagle support" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (448 commits) ARM: dts: aspeed: Fix hwrng register address arm64: dts: sprd: whale2: Add the rtc enable clock for watchdog arm64: dts: sprd: Add GPIO and GPIO keys device nodes arm64: dts: sprd: fix typo in 'remote-endpoint' arm64: dts: apq8096-db820c: Removed bt-en-1-8v regulator arm64: dts: fix regulator property name for wlan pcie endpoint arm64: dts: qcom: msm8996: Use UFS_GDSC for UFS ARM: dts: pxa3xx: fix MMC clocks ARM: pxa: dts: add pin definitions for extended GPIOs ARM: pxa: dts: add gpio-ranges to gpio controller ARM: dts: ipq8074: Enable few peripherals for hk01 board ARM: dts: ipq8074: Add pcie nodes ARM: dts: ipq8074: Add peripheral nodes ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c2 board file ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk07.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk07.1 common data ARM: dts: ipq4019: Add qcom-ipq4019-ap.dk04.1-c3 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.1-c1 board file ARM: dts: ipq4019: Add ipq4019-ap.dk04.dtsi ARM: dts: ipq4019: Change the max opp frequency ...
| * ARM: dts: stm32: Fix DTC warnings for stm32mp157Alexandre Torgue2018-05-041-3/+3
| | | | | | | | | | | | | | | | | | | | | | Fix DTC warnings for stm32mp157: Warning (unit_address_vs_reg): /soc/pin-controller: node has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): /soc/pin-controller/uart4@0: node has a unit name, but no reg property Warning (unit_address_vs_reg): /soc/pin-controller-z: node has a reg or ranges property, but no unit name Warning (unit_address_vs_reg): /memory: node has a reg or ranges property, but no unit name Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| * ARM: dts: stm32: add flash nor support on stm32mp157c eval boardLudovic Barre2018-05-041-0/+45
| | | | | | | | | | | | | | | | This patch adds flash nor on qspi. Each flash is connected in quad mode and has its own chip select. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| * ARM: dts: stm32: add cec pins to stm32mp157cyannick fertre2018-05-041-0/+9
| | | | | | | | | | | | | | This patch adds cec support on stm32mp157c eval board. Signed-off-by: Yannick Fertre <yannick.fertre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| * ARM: dts: stm32: Add I2Cs pins used on STM32MP157CPierre-Yves MORDRET2018-05-041-0/+40
| | | | | | | | | | | | | | This patch adds pins groups for I2C1,2,4 & 5 Signed-off-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| * ARM: dts: stm32: add PWM pins used on stm32mp157c-ev1 boardFabrice Gasnier2018-05-021-0/+27
| | | | | | | | | | | | | | | | | | | | | | stm32mp157c evaluation board has following PWM pins available on GPIO expansion connector: - TIM2_CH4 (PA3) - TIM8_CH4 (PI2) - TIM12_CH1 (PH6) Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
| * ARM: dts: stm32: Enable stm32mp1 clock driver on stm32mp157cGabriel Fernandez2018-04-161-12/+12
| | | | | | | | | | | | | | This patch enables stm32mp1 clock driver. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* | ARM: dts: stm32: Add exti support to stm32mp157 pinctrlLudovic Barre2018-05-241-0/+4
|/ | | | | | | | This patch adds support of external interrupt for gpio[a..k], gpioz Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
* ARM: dts: stm32: add initial support of stm32mp157c eval boardLudovic Barre2018-02-261-0/+13
| | | | | | | | | | | | | | | | | Add support of stm32mp157c evaluation board (part number: STM32MP157C-EV1) split in 2 elements: -Daughter board (part number: STM32MP157C-ED1) which includes CPU, memory and power supply -Mother board (part number: STM32MP157C-EM1) which includes external peripherals (like display, camera,...) and extension connectors. The daughter board can run alone, this is why the device tree files are split in two layers, for the complete evaluation board (ev1) and for the daughter board alone (ed1). Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
* ARM: dts: stm32: add stm32mp157c initial supportLudovic Barre2018-02-261-0/+172
Add stm32mp157c initial support with: -Dual Cortex-A7 -Arm psci, timer, gic -Pinctrl -Uart Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
generated by cgit (git 2.34.1) at 2025-02-25 18:47:43 +0000