| Commit message (Collapse) | Author | Age | Files | Lines |
|---|
| |\
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/late
Two regression fixes for omaps
Two one-liners to fix board-ams-delta booting regression and
logicpd-som-lv MMC card detect to use GPIO_ACTIVE_LOW instead of
IRQ_TYPE_LEVEL_LOW. Note that the board-ams-delta regression has
been in there already since v5.0, so if necessary these can wait
for the merge window.
* tag 'omap-for-v5.1/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: logicpd-som-lv: Fix MMC1 card detect
ARM: OMAP1: ams-delta: fix early boot crash when LED support is disabled
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| | |
The card detect pin was incorrectly using IRQ_TYPE_LEVEL_LOW
instead of GPIO_ACTIVE_LOW when reading the state of the CD pin.
This was previosly fixed on Torpedo, but missed on the SOM-LV
Fixes: 5cb8b0fa55a9 ("ARM: dts: Move most of logicpd-som-lv-37xx-devkit.dts to logicpd-som-lv-baseboard.dtsi")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
|
| |\ \
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | |
| | | |
Pull ARM Device-tree updates from Olof Johansson:
"Besides new bindings and additional descriptions of hardware blocks
for various SoCs and boards, the main new contents here is:
SoCs:
- Intel Agilex (SoCFPGA)
- NXP i.MX8MM (Quad Cortex-A53 with media/graphics focus)
New boards:
- Allwinner:
+ RerVision H3-DVK (H3)
+ Oceanic 5205 5inMFD (H6)
+ Beelink GS2 (H6)
+ Orange Pi 3 (H6)
- Rockchip:
+ Orange Pi RK3399
+ Nanopi NEO4
+ Veyron-Mighty Chromebook variant
- Amlogic:
+ SEI Robotics SEI510
- ST Micro:
+ stm32mp157a discovery1
+ stm32mp157c discovery2
- NXP:
+ Eckelmann ci4x10 (i.MX6DL)
+ i.MX8MM EVK (i.MX8MM)
+ ZII i.MX7 RPU2 (i.MX7)
+ ZII SPB4 (VF610)
+ Zii Ultra (i.MX8M)
+ TQ TQMa7S (i.MX7Solo)
+ TQ TQMa7D (i.MX7Dual)
+ Kobo Aura (i.MX50)
+ Menlosystems M53 (i.MX53)j
- Nvidia:
+ Jetson Nano (Tegra T210)"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (593 commits)
arm64: dts: bitmain: Add UART pinctrl support for Sophon Edge
arm64: dts: bitmain: Add pinctrl support for BM1880 SoC
arm64: dts: bitmain: Add GPIO Line names for Sophon Edge board
arm64: dts: bitmain: Add GPIO support for BM1880 SoC
ARM: dts: gemini: Indent DIR-685 partition table
dt-bindings: hwmon (pwm-fan) Remove dead "cooling-*-state" properties
ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
arm64: dts: msm8998: thermal: Restrict thermal zone name length to under 20
arm64: dts: msm8998: thermal: Fix number of supported sensors
arm64: dts: msm8998-mtp: thermal: Remove skin and battery thermal zones
arm64: dts: exynos: Move fixed-clocks out of soc
arm64: dts: exynos: Move pmu and timer nodes out of soc
ARM: dts: s5pv210: Fix camera clock provider on Goni board
ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
ARM: dts: exynos: Move pmu and timer nodes out of soc
arm64: dts: rockchip: fix IO domain voltage setting of APIO5 on rockpro64
arm64: dts: db820c: Add sound card support
arm64: dts: apq8096-db820c: Add HDMI display support
...
|
| | |\ \
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
https://github.com/vzapolskiy/linux-lpc32xx into arm/dt
ARM: lpc32xx: devicetree updates for v5.2
Here are the changes for ARM NXP LPC32xx devicetree files:
* disabled I2S and MAC controllers by default,
* set default #address-cells = <1> / #size-cells = <0> for SPI slaves,
* fix notation of hexadecimal values,
* switched lpc32xx.dtsi to SPDX license identifier.
* tag 'lpc32xx-dt-for-5.2' of https://github.com/vzapolskiy/linux-lpc32xx:
ARM: dts: lpc32xx: use SPDX license identifier
ARM: dts: lpc32xx: add address and size cell values to SPI controller nodes
ARM: dts: lpc32xx: disable MAC controller by default
ARM: dts: lpc32xx: disable I2S controllers by default
ARM: dts: lpc32xx: change hexadecimal values to lower case
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
Replace GPLv2+ header with the SPDX identifier.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
All 4 SPI controllers on NXP LPC32xx SoC support SPI slaves discerning them
by one cell address value, set it as default to avoid duplication in board
device tree files.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
NXP LPC3220 and LPC3230 SoCs do NOT contain a MAC controller, so,
since for now there is just one dtsi file for all variants of
NXP LPC32xx SoCs, it is reasonable to disable the controller
by default and enable it in device tree files of particular boards.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
The I2S controllers found on NXP LPC32xx SoCs are not yet in
use by any boards supported in upstream, disable the controllers
by default.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
|
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | |
This is a non-functional change, all inconsistent hexadecimal values
found in the file are now fixed.
Taking a chance to interfere into some non-functional change I add
my copyright notice for work done during the last few years.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com>
|
| | |\ \ \
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM changes for v5.2, second round
1. DTC warning fixes: move timer and pmu nodes outside of soc node,
2. Properly override MDMA0 on Universal C210,
3. Fix camera clock provider (to match bindings and driver) on Goni.
* tag 'samsung-dt-5.2-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5pv210: Fix camera clock provider on Goni board
ARM: dts: exynos: Properly override node to use MDMA0 on Universal C210
ARM: dts: exynos: Move fixed-clocks out of soc on Exynos3250
ARM: dts: exynos: Remove unneeded address/size cells from fixed-clock on Exynos3250
ARM: dts: exynos: Move pmu and timer nodes out of soc
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The camera driver (according also to bindings) registers a clock
provider if clock-output-names property is present and later the sensors
use registered clocks.
The DTS for S5Pv210 Goni board was incorrectly adding a child node with
clock output cells but without clock-output-names property. Although
the DTS was compiling (with "/soc/camera/clock-controller: missing or
empty reg/ranges property" warning), the clock provider was not
registered.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The Universal C210 (Exynos4210) uses the secure interface of MDMA0,
instead of regular one - non-secure MDMA1. DTS was overriding MDMA1
node address which caused DTC W=1 warning:
arch/arm/boot/dts/exynos4.dtsi:707.25-716.6:
Warning (simple_bus_reg): /soc/amba/mdma@12850000: simple-bus unit address format error, expected "12840000"
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The three fixed-clocks (xusbxti, xxti and xtcxo) are inputs to the
Exynos3250 therefore they should not be inside the soc node. This also
fixes DTC W=1 warning:
arch/arm/boot/dts/exynos3250.dtsi:112.21-139.5:
Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
Exynos3250
xusbxti fixed-clock should not have address/size cells because it does
not have any children. This also fixes DTC W=1 warning:
arch/arm/boot/dts/exynos3250.dtsi:112.21-139.5:
Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
The ARM PMU and ARM architected timer nodes are part of ARM CPU design
therefore they should not be inside the soc node. This also fixes DTC
W=1 warnings like:
arch/arm/boot/dts/exynos3250.dtsi:106.21-135.5:
Warning (simple_bus_reg): /soc/fixed-rate-clocks: missing or empty reg/ranges property
arch/arm/boot/dts/exynos3250.dtsi:676.7-680.5:
Warning (simple_bus_reg): /soc/pmu: missing or empty reg/ranges property
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
|
| | | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | |
| | | | | |
It is discouraged to have OF partitions as subnodes directly
under the device, create a "partitions" subnode and put the
partitions inside it.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | |\ \ \ \
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt
Qualcomm Device Tree Changes for v5.2 - Part 2
* Add cxo_board as ref clk for DSI phy
* tag 'qcom-dts-for-5.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: qcom-apq8064: Set 'cxo_board' as ref clock of the DSI PHY
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
Add 'xo_board' as ref clock for the DSI PHY, it was previously
hardcoded in the PLL 'driver' for the 28nm 8960 PHY.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Andy Gross <agross@kernel.org>
|
| | |\ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/dt
Much love for rk3288 in general (power coefficients for the scheduler)
and veyron chromeos devices in particular (regulators, suspend, cleanups)
and bulk conversion of the remaining gpios to the helper constants denoting
the iomux.
* tag 'v5.2-rockchip-dts32-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: vdd_gpu off in suspend for rk3288-veyron
ARM: dts: rockchip: vcc33_ccd off in suspend for rk3288-veyron-chromebook
ARM: dts: rockchip: Add DDR retention/poweroff to rk3288-veyron hogs
ARM: dts: rockchip: Add dynamic-power-coefficient for rk3288
ARM: dts: rockchip: bulk convert gpios to their constant counterparts
ARM: dts: rockchip: Add BT_EN to the power sequence for veyron
ARM: dts: rockchip: Remove unnecessary setting of UART0 SCLK rate on veyron
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
At some point long long ago the downstream GPU driver would crash if
we turned the GPU off during suspend. For some context you can see:
https://chromium-review.googlesource.com/#/c/215780/5..6/arch/arm/boot/dts/rk3288-pinky-rev2.dts
At some point in time not too long after that got fixed.
It's unclear why the GPU is left enabled during suspend on the
mainline kernel. Everything seems fine if I turn this off, so let's
do it.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
As per my comments when the device tree for rk3288-veyron-chromebook
first landed:
> Technically I think vcc33_ccd can be off since we have
> 'needs-reset-on-resume' down in the EHCI port (this regulator is for
> the USB webcam that's connected to the EHCI port).
>
> ...but leaving it on for now seems fine until we get suspend/resume
> more solid.
It's probably about time to do it right.
[1] https://lore.kernel.org/linux-arm-kernel/CAD=FV=U37Yx8Mqk75_x05zxonvdc3qRMhqp8TyTDPWGHqSuRqg@mail.gmail.com/
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Elaine Zhang <zhangqing@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Even though upstream Linux doesn't yet go into deep enough suspend to
get DDR into self refresh, there is no harm in setting these pins up.
They'll only actually do something if we go into a deeper suspend but
leaving them configed always is fine.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
The value was determined with the following method:
- take CPUs 1-3 offline
- for each OPP
- set cpufreq min and max freq to OPP freq
- start dhrystone benchmark
- measure CPU power consumption during 10s
- calculate Cx for OPPx
- Cx = (Px - P1) / (Vx²fx - V1²f1) [1]
using the following units: mW / Ghz / V [2]
- C = avg(C2, ..., Cn)
[1] see commit 4daa001a1773 ("arm64: dts: juno: Add cpu
dynamic-power-coefficient information")
[2] https://patchwork.kernel.org/patch/10493615/#22158551
FTR, these are the values for the different OPPs:
freq (kHz) mV Px (mW) Cx
126000 900 39
216000 900 66 370
312000 900 95 372
408000 900 122 363
600000 900 177 359
696000 950 230 363
816000 1000 297 361
1008000 1050 404 362
1200000 1100 528 362
1416000 1200 770 377
1512000 1300 984 385
1608000 1350 1156 394
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Rockchip SoCs use 2 different numbering schemes. Where the gpio-
controllers just count 0-31 for their 32 gpios, the underlying
iomux controller splits these into 4 separate entities A-D.
Device-schematics always use these iomux-values to identify pins,
so to make mapping schematics to devicetree easier Andy Yan introduced
named constants for the pins but so far we only used them on new
additions.
Using a sed-script created by Emil Renner Berthing bulk-convert
the remaining raw gpio numbers into their descriptive counterparts
and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x
mappings:
/rockchip,pins *=/bcheck
b # to end of script
:append-next-line
N
:check
/^[^;]*$/bappend-next-line
s/<RK_GPIO\([0-9]\) /<\1 /g
s/<\([^ ][^ ]* *\)0 /<\1RK_PA0 /g
s/<\([^ ][^ ]* *\)1 /<\1RK_PA1 /g
s/<\([^ ][^ ]* *\)2 /<\1RK_PA2 /g
s/<\([^ ][^ ]* *\)3 /<\1RK_PA3 /g
s/<\([^ ][^ ]* *\)4 /<\1RK_PA4 /g
s/<\([^ ][^ ]* *\)5 /<\1RK_PA5 /g
s/<\([^ ][^ ]* *\)6 /<\1RK_PA6 /g
s/<\([^ ][^ ]* *\)7 /<\1RK_PA7 /g
s/<\([^ ][^ ]* *\)8 /<\1RK_PB0 /g
s/<\([^ ][^ ]* *\)9 /<\1RK_PB1 /g
s/<\([^ ][^ ]* *\)10 /<\1RK_PB2 /g
s/<\([^ ][^ ]* *\)11 /<\1RK_PB3 /g
s/<\([^ ][^ ]* *\)12 /<\1RK_PB4 /g
s/<\([^ ][^ ]* *\)13 /<\1RK_PB5 /g
s/<\([^ ][^ ]* *\)14 /<\1RK_PB6 /g
s/<\([^ ][^ ]* *\)15 /<\1RK_PB7 /g
s/<\([^ ][^ ]* *\)16 /<\1RK_PC0 /g
s/<\([^ ][^ ]* *\)17 /<\1RK_PC1 /g
s/<\([^ ][^ ]* *\)18 /<\1RK_PC2 /g
s/<\([^ ][^ ]* *\)19 /<\1RK_PC3 /g
s/<\([^ ][^ ]* *\)20 /<\1RK_PC4 /g
s/<\([^ ][^ ]* *\)21 /<\1RK_PC5 /g
s/<\([^ ][^ ]* *\)22 /<\1RK_PC6 /g
s/<\([^ ][^ ]* *\)23 /<\1RK_PC7 /g
s/<\([^ ][^ ]* *\)24 /<\1RK_PD0 /g
s/<\([^ ][^ ]* *\)25 /<\1RK_PD1 /g
s/<\([^ ][^ ]* *\)26 /<\1RK_PD2 /g
s/<\([^ ][^ ]* *\)27 /<\1RK_PD3 /g
s/<\([^ ][^ ]* *\)28 /<\1RK_PD4 /g
s/<\([^ ][^ ]* *\)29 /<\1RK_PD5 /g
s/<\([^ ][^ ]* *\)30 /<\1RK_PD6 /g
s/<\([^ ][^ ]* *\)31 /<\1RK_PD7 /g
s/<\([^ ][^ ]* *[^ ][^ ]* *\)0 /<\1RK_FUNC_GPIO /g
s/<\([^ ][^ ]* *[^ ][^ ]* *\)RK_FUNC_\([1-9]\) /<\1\2 /g
Suggested-by: Emil Renner Berthing <esmil@mailme.dk>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Add GPIO D5 (BT_ENABLE_L) as reset-GPIO to the power sequence for the
Bluetooth/WiFi module. On devices with a Broadcom module the signal
needs to be asserted to use Bluetooth.
Note that BT_ENABLE_L is a misnomer in the schematics, the signal
actually is active-high.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Some veyron devices have a Bluetooth controller connected on UART0.
The UART needs to operate at a high speed, however setting the clock
rate at initialization has no practical effect. During initialization
user space adjusts the UART baudrate multiple times, which ends up
changing the SCLK rate. After a successful initiatalization the clk
is running at the desired speed (48MHz).
Remove the unnecessary clock rate configuration from the DT.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
The old "cooling-{min,max}-state" properties for thermal bindings were
ratified to "cooling-{min,max}-level" by commit eb168b70dea5 ("of:
thermal: Fix inconsitency between cooling-*-state and cooling-*-level"),
which were later removed entirely by commit e04907dbc259 ("dt-bindings:
thermal: Remove "cooling-{min|max}-level" properties").
The pwm-fan binding, however, was apparently in-flight in parallel with
that ratification, and so managed to introduce an example of the old
properties which escaped the scope of the later cleanup and has thus
continued to be dutifully copied for new boards despite being useless.
Clean up these remaining undocumented anachronisms to minimise any
further confusion.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Shawn Guo <shawnguo@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | |\ \ \ \ \ \
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
mvebu dt for 5.2 (part 1)
- Add interrupt support for wathdog on Armada 38x
* tag 'mvebu-dt-5.2-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada-38x: add interrupts for watchdog
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | | | |_|_|/ /
| | |/| | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
The first interrupt is for the regular watchdog timeout. Normally the
RSTOUT line will trigger a reset before this interrupt fires but on
systems with a non-standard reset it may still trigger.
The second interrupt is for a timer1 which is used as a pre-timeout for
the watchdog.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
|
| | |\ \ \ \ \ \
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
* 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91-vinco: use SPDX-License-Identifier
ARM: dts: atmel boards: use SPDX-License-Identifier
ARM: dts: at91sam9xe: use SPDX-License-Identifier
ARM: dts: sama5d{2,4}: use SPDX-License-Identifier
ARM: dts: at91: sama5d2_xplained: Add proper regulator states for suspend-to-mem
ARM: dts: at91: sama5d2: add labels to soc dtsi for derivative boards
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
External E-Mail
The X11 license text [1] is explicitly for the X Consortium and has a
couple of extra clauses. The MIT license text [2] is actually what the
current DT files claim.
[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
External E-Mail
The X11 license text [1] is explicitly for the X Consortium and has a
couple of extra clauses. The MIT license text [2] is actually what the
current DT files claim.
[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
External E-Mail
The X11 license text [1] is explicitly for the X Consortium and has a
couple of extra clauses. The MIT license text [2] is actually what the
current DT files claim.
[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
External E-Mail
The X11 license text [1] is explicitly for the X Consortium and has a
couple of extra clauses. The MIT license text [2] is actually what the
current DT files claim.
[1] https://spdx.org/licenses/X11.html
[2] https://spdx.org/licenses/MIT.html
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
|
| | | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | |
| | | | | | | | |
When entering suspend-to-mem, all PMIC outputs are disabled except
VDDIODDR which is put in power saving mode, and whose voltage is
increased (probably to counter the poor accuracy of power saving mode).
Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
[claudiu.beznea@microchip.com: use regulator-changeable-in-suspend,
regulator-suspend-max-microvolt, regulator-suspend-max-microvolt,
use macros for regulators' states, add regulator-inital-state]
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
|
| | | |/ / / / /
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
This adds labels to commonly used device-tree nodes so that derivative
boards can avoid ahb/apb hierarchy.
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
|
| | |\ \ \ \ \ \
| | | |_|/ / /
| | |/| | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux into arm/dt
Qualcomm Device Tree Changes for v5.2
* Add gpio ranges for Qualcomm platforms
* Correct the IPQ4019 PCIe BAR range
* tag 'qcom-dts-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/agross/linux:
ARM: dts: qcom: ipq4019: enlarge PCIe BAR range
ARM: dts: qcom: pma8084: add gpio-ranges
ARM: dts: qcom: msm8660: add gpio-ranges
ARM: dts: qcom: mdm9615: add gpio-ranges
ARM: dts: qcom: apq8064: add gpio-ranges
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
David Bauer reported that the VDSL modem (attached via PCIe)
on his AVM Fritz!Box 7530 was complaining about not having
enough space in the BAR. A closer inspection of the old
qcom-ipq40xx.dtsi pulled from the GL-iNet repository listed:
| qcom,pcie@80000 {
| compatible = "qcom,msm_pcie";
| reg = <0x80000 0x2000>,
| <0x99000 0x800>,
| <0x40000000 0xf1d>,
| <0x40000f20 0xa8>,
| <0x40100000 0x1000>,
| <0x40200000 0x100000>,
| <0x40300000 0xd00000>;
| reg-names = "parf", "phy", "dm_core", "elbi",
| "conf", "io", "bars";
Matching the reg-names with the listed reg leads to
<0xd00000> as the size for the "bars".
Cc: stable@vger.kernel.org
BugLink: https://www.mail-archive.com/openwrt-devel@lists.openwrt.org/msg45212.html
Reported-by: David Bauer <mail@david-bauer.net>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Andy Gross <agross@kernel.org>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
This adds the gpio-ranges property so that the GPIO pins are initialized
by the GPIO framework and not pinctrl. This fixes a circular dependency
between these two frameworks so GPIO hogging can be used on this board.
This was not tested on this particular hardware, however this same
change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Andy Gross <agross@kernel.org>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
This adds the gpio-ranges property so that the GPIO pins are initialized
by the GPIO framework and not pinctrl. This fixes a circular dependency
between these two frameworks so GPIO hogging can be used on this board.
This was not tested on this particular hardware, however this same
change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Andy Gross <agross@kernel.org>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
This adds the gpio-ranges property so that the GPIO pins are initialized
by the GPIO framework and not pinctrl. This fixes a circular dependency
between these two frameworks so GPIO hogging can be used on this board.
This was not tested on this particular hardware, however this same
change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Andy Gross <agross@kernel.org>
|
| | | |/ / / /
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | | |
This adds the gpio-ranges property so that the GPIO pins are initialized
by the GPIO framework and not pinctrl. This fixes a circular dependency
between these two frameworks so GPIO hogging can be used on this board.
This was not tested on this particular hardware, however this same
change was tested on qcom-pm8941 using a LG Nexus 5 (hammerhead) phone.
Signed-off-by: Brian Masney <masneyb@onstation.org>
Signed-off-by: Andy Gross <agross@kernel.org>
|
| | |\ \ \ \ \
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm device tree update for 5.2:
- New board support: imx50-kobo-aura, imx53-m53menlo, imx6dl-eckelmann,
imx7d-mba7, imx7d-zii-rpu2, and vf610-zii-spb4.
- Add i2c, mmc and spi aliases for SoC i.MX35, i.MX50 and i.MX6SL.
- Use new 'reset-gpios' property describing CODEC reset pin for board
mx6qdl-zii-rdu2, imx6qdl-gw5903 and imx6qdl-var-dart.
- Specify viewport count for PCIE block on SoC imx7d and imx6qdl.
- Correct 'ipg' clock of SDMA device for i.MX5, i.MX6 and i.MX7 SoCs.
- Rename MMDC memory controller device to be generic and add MMDC
device for imx7ulp SoC.
- Add OCOTP device support for imx7ulp SoC.
- Improve ZII board DTS by switching to SPDX identifier and using generic
device node name.
- A series from Rui Miguel Silva to add various media related devices
for i.MX7 SoC, and enable ov2680 sensor support for imx7s-warp board.
- Random small updates on various board support.
* tag 'imx-dt-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (59 commits)
ARM: dts: imx7s: Specify #io-channel-cells in ADC nodes
ARM: dts: vf610-zii-dev-rev-b: Specify CS as GPIO_ACTIVE_LOW in spi0
ARM: dts: vf610-zii-dev: Mark i2c0 SCL as GPIO_OPEN_DRAIN
ARM: dts: Add support for ZII i.MX7 RPU2 board
ARM: dts: bugfix tqma7 soft reset issue
ARM: dts: imx53: Add Menlosystems M53 board
ARM: dts: imx53: Rename M53 SoM touchscreen node
ARM: dts: imx6dl-sabreauto: update opp table for auto part
ARM: dts: imx: Use generic node names for Zii dts
ARM: dts: imx: Switch Zii dts to SPDX identifier
ARM: dts: imx6q-logicpd: Shutdown LCD regulator during suspend
ARM: dts: imx6q-logicpd: Enable Analog audio capture
ARM: dts: imx6sll: add cooling-cells for cpu-freq cooling device
ARM: dts: imx50: Add Kobo Aura DTS
ARM: dts: imx6qdl-var-dart: Use new CODEC reset pin name
ARM: dts: imx6qdl-gw5903: Use new CODEC reset pin name
ARM: dts: mx6qdl-zii-rdu2: Use new CODEC reset pin name
ARM: dts: imx50: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
ARM: dts: imx51: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
ARM: dts: imx53: Specify IMX5_CLK_IPG as "ahb" clock to SDMA
...
Signed-off-by: Olof Johansson <olof@lixom.net>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Specify #io-channel-cells in ADC nodes. Needed to be able to reference
them by phandle.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Specify CS as GPIO_ACTIVE_LOW in spi0 to fix the following warning:
m25p128@0 enforce active low on chipselect handle
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Mark i2c0 SCL as GPIO_OPEN_DRAIN to fix the following warning:
gpio-36 (scl): enforced open drain please flag it properly in DT/ACPI DSDT/board file
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Add support for ZII's i.MX7 based Remote Peripheral Unit 2 (RPU2)
board.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Chris Healy <cphealy@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: devicetree@vger.kernel.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Running reboot command on the TQMa7 board would just hang infinite
at the end of the system shutdown process.
Handling of i.MX7 errata e10574:
Watchdog: A watchdog timeout or software trigger will not reset the SOC.
Moved pinctrl from common mba7 to common tqma7 dtsi as it improves
readability of errata handling. Most integrators of this SoM will
likely use the development board as inspiration for handling this
SoC issue.
Signed-off-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Add device tree for the Menlosystems board based on i.MX53 M53 SoM.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
| | | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | |
| | | | | | | |
Rename the touchscreen node to match contemporary design.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: NXP Linux Team <linux-imx@nxp.com>
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
