aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: r8a7778: Use R-Car SDHI Gen1 fallback compat stringSimon Horman2017-11-271-3/+6
| | | | | | | | | | Use newly added R-Car SDHI Gen1 fallback compat string in the DT of the r8a7778 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7745: Use R-Car SDHI Gen2 fallback compat stringSimon Horman2017-11-271-3/+6
| | | | | | | | | | Use newly added R-Car SDHI Gen2 fallback compat string in the DT of the r8a7745 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7743: Use R-Car SDHI Gen2 fallback compat stringSimon Horman2017-11-271-3/+6
| | | | | | | | | | Use newly added R-Car SDHI Gen2 fallback compat string in the DT of the r8a7743 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7745: Add IIC cores to dtsiFabrizio Castro2017-11-271-0/+36
| | | | | | | | | | Add iic0 and iic1 nodes to SoC dtsi. Also, define aliases i2c6 and i2c7. Board specific DT files will enable the interfaces if needed. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: iwg22d-sodimm: Enable HS-USBBiju Das2017-11-271-0/+11
| | | | | | | | | | From: Biju Das <biju.das@bp.renesas.com> Enable HS-USB on iWave RZ/G1E carrier board. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7745: Enable DMA for HSUSBBiju Das2017-11-271-0/+3
| | | | | | | | | | From: Biju Das <biju.das@bp.renesas.com> This patch adds DMA properties to the HSUSB node. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7745: Add USB-DMAC device nodesBiju Das2017-11-271-0/+28
| | | | | | | | From: Biju Das <biju.das@bp.renesas.com> Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7745: Add HS-USB device nodeBiju Das2017-11-271-0/+14
| | | | | | | | | | | From: Biju Das <biju.das@bp.renesas.com> Define the R8A7745 generic part of the HS-USB device node. It is up to the board file to enable the device. Signed-off-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: iwg22d-sodimm: sort dt nodesFabrizio Castro2017-11-271-31/+31
| | | | | | | | | Improve the layout of r8a7745-iwg22d-sodimm.dts by sorting the nodes alphabetically. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: iwg22d-sodimm-dbhd-ca: Add device tree for HDMI DBFabrizio Castro2017-11-272-0/+62
| | | | | | | | | | | | Add file r8a7745-iwg22d-sodimm-dbhd-ca.dts to provide support for iW-RainboW-G22D with HDMI daughter board plugged in. The interfaces defined in the new .dts file are: scif1, scif5, and hscif2. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: iwg22d: Add /dev/ttySC5 supportFabrizio Castro2017-11-271-0/+14
| | | | | | | | | | Add support for HSCIF1 as /dev/ttySC5, keeping the same naming scheme adopted by iWave in their BSP release. This interface uses RTS/CTS. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: iwg22d: Use /dev/ttySC3 as debug consoleFabrizio Castro2017-11-271-2/+2
| | | | | | | | | The BSP release from iWave uses /dev/ttySC3 as debug console, this patch renames the alias accordingly for compatibility. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Signed-off-by: Chris Paterson <chris.paterson2@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: iwg20d-q7-dbcm-ca: Add HDMI video outputFabrizio Castro2017-11-271-0/+75
| | | | | | | | | | | | | Although there is a HDMI connector on the q7 carrier board it is not connected to the RZ/G1M SoC. One must use the HDMI connector on the camera daughter board. This patch adds support for this connector. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7743: Add DU supportFabrizio Castro2017-11-271-0/+30
| | | | | | | | | | Add du node to r8a7743 SoC DT. Boards that want to enable the DU need to specify the output topology. Signed-off-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com> Reviewed-by: Biju Das <biju.das@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
* ARM: dts: r8a7794: Use R-Car Gen2 Ether fallback compat stringSimon Horman2017-11-271-1/+2
| | | | | | | | | | | Use newly added R-Car Gen2 Ether fallback compat string in the DT of the r8a7794 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7793: Use R-Car Gen2 Ether fallback compat stringSimon Horman2017-11-271-1/+2
| | | | | | | | | | | Use newly added R-Car Gen2 Ether fallback compat string in the DT of the r8a7793 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7791: Use R-Car Gen2 Ether fallback compat stringSimon Horman2017-11-271-1/+2
| | | | | | | | | | | Use newly added R-Car Gen2 Ether fallback compat string in the DT of the r8a7791 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7790: Use R-Car Gen2 Ether fallback compat stringSimon Horman2017-11-271-1/+2
| | | | | | | | | | | Use newly added R-Car Gen2 Ether fallback compat string in the DT of the r8a7790 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7778: Use R-Car Gen1 Ether fallback compat stringSimon Horman2017-11-271-1/+2
| | | | | | | | | | | Use newly added R-Car Gen1 Ether fallback compat string in the DT of the r8a7778 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7745: Use R-Car Gen2 Ether fallback compat stringSimon Horman2017-11-271-1/+2
| | | | | | | | | | | Use newly added R-Car Gen2 Ether fallback compat string in the DT of the r8a7745 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* ARM: dts: r8a7743: Use R-Car Gen2 Ether fallback compat stringSimon Horman2017-11-271-1/+2
| | | | | | | | | | | Use newly added R-Car Gen2 Ether fallback compat string in the DT of the r8a7743 SoC. This should have no run-time effect as the driver matches against the per-SoC compat string before considering the fallback compat string. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2017-11-16439-11301/+22261
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM device-tree updates from Arnd Bergmann: "We add device tree files for a couple of additional SoCs in various areas: Allwinner R40/V40 for entertainment, Broadcom Hurricane 2 for networking, Amlogic A113D for audio, and Renesas R-Car V3M for automotive. As usual, lots of new boards get added based on those and other SoCs: - Actions S500 based CubieBoard6 single-board computer - Amlogic Meson-AXG A113D based development board - Amlogic S912 based Khadas VIM2 single-board computer - Amlogic S912 based Tronsmart Vega S96 set-top-box - Allwinner H5 based NanoPi NEO Plus2 single-board computer - Allwinner R40 based Banana Pi M2 Ultra and Berry single-board computers - Allwinner A83T based TBS A711 Tablet - Broadcom Hurricane 2 based Ubiquiti UniFi Switch 8 - Broadcom bcm47xx based Luxul XAP-1440/XAP-810/ABR-4500/XBR-4500 wireless access points and routers - NXP i.MX51 based Zodiac Inflight Innovations RDU1 board - NXP i.MX53 based GE Healthcare PPD biometric monitor - NXP i.MX6 based Pistachio single-board computer - NXP i.MX6 based Vining-2000 automotive diagnostic interface - NXP i.MX6 based Ka-Ro TX6 Computer-on-Module in additional variants - Qualcomm MSM8974 (Snapdragon 800) based Fairphone 2 phone - Qualcomm MSM8974pro (Snapdragon 801) based Sony Xperia Z2 Tablet - Realtek RTD1295 based set-top-boxes MeLE V9 and PROBOX2 AVA - Renesas R-Car V3M (R8A77970) SoC and "Eagle" reference board - Renesas H3ULCB and M3ULCB "Kingfisher" extension infotainment boards - Renasas r8a7745 based iWave G22D-SODIMM SoM - Rockchip rk3288 based Amarula Vyasa single-board computer - Samsung Exynos5800 based Odroid HC1 single-board computer For existing SoC support, there was a lot of ongoing work, as usual most of that concentrated on the Renesas, Rockchip, OMAP, i.MX, Amlogic and Allwinner platforms, but others were also active. Rob Herring and many others worked on reducing the number of issues that the latest version of 'dtc' now warns about. Unfortunately there is still a lot left to do. A rework of the ARM foundation model introduced several new files for common variations of the model" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (599 commits) arm64: dts: uniphier: route on-board device IRQ to GPIO controller for PXs3 dt-bindings: bus: Add documentation for the Technologic Systems NBUS arm64: dts: actions: s900-bubblegum-96: Add fake uart5 clock ARM: dts: owl-s500: Add CubieBoard6 dt-bindings: arm: actions: Add CubieBoard6 ARM: dts: owl-s500-guitar-bb-rev-b: Add fake uart3 clock ARM: dts: owl-s500: Set power domains for CPU2 and CPU3 arm: dts: mt7623: remove unused compatible string for pio node arm: dts: mt7623: update usb related nodes arm: dts: mt7623: update crypto node ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ...
| * Merge tag 'v4.15-rockchip-dts32-2' of ↵Arnd Bergmann2017-11-076-16/+270
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into next/dt Pull "Rockchip dts32 updates for 4.15 part2" from Heiko Stübner: CEC support for the two rk3288-firefly variants and general hdmi support for the firefly-reload. A lot of additions and corrections for the rk3288-vyasa and thermal support for the rv1108. * tag 'v4.15-rockchip-dts32-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: enable the hdmi output on the rk3288-firefly-reload ARM: dts: rockchip: define the two possible rk3288 CEC pins ARM: dts: rockchip: add the cec clk for dw-hdmi on rk3288 ARM: dts: rockchip: Add io domains for rk3288-vyasa ARM: dts: rockchip: Add usb otg for rk3288-vyasa ARM: dts: rockchip: Add usb host for rk3288-vyasa ARM: dts: rockchip: Add gmac support for rk3288-vyasa board ARM: dts: rockchip: Add regulators for rk3288-vyasa ARM: dts: rockchip: Use vmmc-supply from PMIC on rk3288-vyasa ARM: dts: rockchip: Remove vdd_log from rk808, DCDC_REG1 on rk3288-vyasa ARM: dts: rockchip: enable tsadc module on RV1108 evaluation board ARM: dts: rockchip: add thermal nodes for RV1108 SoC ARM: dts: rockchip: add tsadc node for RV1108 SoC ARM: dts: rockchip: add RGA device node for RK3288
| | * ARM: dts: rockchip: enable the hdmi output on the rk3288-firefly-reloadHans Verkuil2017-10-212-0/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The vdd10_lcd and vcc18_lcd regulators need to be enabled for HDMI output to work, so add 'regulator-always-on', just as is done in rk3288-firefly.dtsi. Also enable i2c5, the hdmi block and configure the correc cec pin. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: define the two possible rk3288 CEC pinsHans Verkuil2017-10-211-0/+8
| | | | | | | | | | | | | | | | | | | | | The CEC line can be routed to two possible pins. Define those pins. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: add the cec clk for dw-hdmi on rk3288Hans Verkuil2017-10-211-2/+2
| | | | | | | | | | | | | | | | | | | | | The dw-hdmi block needs the cec clk for the rk3288. Add it. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Add io domains for rk3288-vyasaJagan Teki2017-10-181-0/+15
| | | | | | | | | | | | | | | | | | | | | Add io domains supported by rk3288-vyasa board. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Add usb otg for rk3288-vyasaJagan Teki2017-10-171-0/+25
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add usb otg support for rk3288-vyasa, board support usb1 otg power through otg_vbus_drv and naming conversion followed as per schematic. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Add usb host for rk3288-vyasaJagan Teki2017-10-171-0/+48
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add usb host support for rk3288-vyasa, board support hub power through phy_pwr_en and usb2 host power through usb2_pwr_en and naming conversion followed as per schematic. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Add gmac support for rk3288-vyasa boardJagan Teki2017-10-171-0/+41
| | | | | | | | | | | | | | | | | | | | | | | | Add the external clock-reference, enable the gmac node and define the phy-related pin settings. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Add regulators for rk3288-vyasaJagan Teki2017-10-171-0/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add supporting regulators for rk3288-vyasa board, dc12_vbat is parent regulatorand followed regulators as are child regulators. regulator naming conversion followed as per schematic for better readability and easy for identification. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Use vmmc-supply from PMIC on rk3288-vyasaJagan Teki2017-10-171-20/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | rk808, SWITCH_REG1 has configured for sdmmc regulator as vcc_sd, so use the same by renaming vcc33_sd to vcc_sd(as per schematic) and drop explicit regulator definition from root. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: Remove vdd_log from rk808, DCDC_REG1 on rk3288-vyasaJagan Teki2017-10-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | vdd_log, never used on DCDC_REG1 of rk808 from latest schematic so remove the same and update the regulator-name as 'vdd_arm' to sync with existing rk3288 board dts files. Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: enable tsadc module on RV1108 evaluation boardRocky Hao2017-10-171-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | Enable tsadc module on RV1108 evaluation board Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: add thermal nodes for RV1108 SoCRocky Hao2017-10-171-0/+38
| | | | | | | | | | | | | | | | | | | | | | | | Add thermal zone and dynamic CPU power coefficients for RV1108 Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: add tsadc node for RV1108 SoCRocky Hao2017-10-171-0/+29
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add tsadc needed main information for RV1108 SoC. 750000Hz is the max clock rate supported by tsadc module. Signed-off-by: Rocky Hao <rocky.hao@rock-chips.com> Acked-by: Eduardo Valentin <edubezval@gmail.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| | * ARM: dts: rockchip: add RGA device node for RK3288Jacob Chen2017-10-171-0/+11
| | | | | | | | | | | | | | | | | | | | | This patch add the RGA dt config of rk3288 SoC. Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * | Merge tag 'sunxi-dt-for-4.15-2' of ↵Arnd Bergmann2017-11-0717-46/+952
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Pull "Allwinner DT changes for 4.15, take 2" from Maxime Ripard: Here are a few commits that would be great to get in 4.15, given how long they've been hanging around. The first and most important one is the reintroduction of the EMAC DT changes after they've been reverted at the last minute in 4.13. There's a arm64 patch that crept in because the H5 and H3 share a common DTSI that is located in arch/arm, and merging that patch through the arm64 PR, especially given the pull requests that have already been sent, would just have generated too many conflicts. * tag 'sunxi-dt-for-4.15-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: a711: Enable USB OTG ARM: dts: sun8i: a711: Add regulator support ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1 ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1 ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi file ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodes ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodes ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodes ARM: dts: sunxi: Add dtsi for AXP81x PMIC arm64: dts: allwinner: H5: Restore EMAC changes ARM: dts: sunxi: Restore EMAC changes (boards) ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emac arm: dts: sunxi: h3/h5: Restore EMAC changes dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY dt-bindings: net: Restore sun8i dwmac binding
| | * | ARM: dts: sun8i: a711: Enable USB OTGMaxime Ripard2017-11-021-0/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TBS A711 has a micro-USB connector that can be used in OTG mode. Enable it. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a711: Add regulator supportMaxime Ripard2017-11-021-10/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The TBS A711 is using an AXP813 PMIC. Let's add all the regulators for that board, and migrate the current, dumb, regulators to the actual ones. Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a83t: bananapi-m3: Enable AP6212 WiFi on mmc1Chen-Yu Tsai2017-11-021-0/+28
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WiFi side of the AP6212 WiFi/BT combo module is connected to mmc1. There are also GPIOs for enable and interrupts. An external clock from the AC100 RTC is also used. Enable WiFi on this board by enabling mmc1 and adding the power sequencing clocks and GPIO, as well as the chip's interrupt line. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a83t: cubietruck-plus: Enable AP6330 WiFi on mmc1Chen-Yu Tsai2017-11-021-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The WiFi side of the AP6330 WiFi/BT combo module is connected to mmc1. There are also GPIOs for enable and interrupts. An external clock from the AC100 RTC is also used. Enable WiFi on this board by enabling mmc1 and adding the power sequencing clocks and GPIO, as well as the chip's interrupt line. For the WiFi module to correctly detect the frequency of its main oscillator, the external low power clock must be set to 32768 Hz. Their does not seem to be proper out-of-band interrupt support for the BCM4330 chip within the AP6330 module. This part is left out for now. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a83t: Move mmc1 pinctrl setting to dtsi fileChen-Yu Tsai2017-11-022-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mmc1 only has 1 possible pinmux setting. Move any settings to the dtsi file and set it by default. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a83t: allwinner-h8homlet-v2: Add AXP818 regulator nodesChen-Yu Tsai2017-11-021-13/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds device nodes for all the regulators of the AXP818 PMIC. Sunxi common regulators are removed, and USB VBUS regulators are added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a83t: bananapi-m3: Add AXP813 regulator nodesChen-Yu Tsai2017-11-021-9/+132
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds device nodes for all the regulators of the AXP813 PMIC. Sunxi common regulators are removed, and USB VBUS regulators are added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sun8i: a83t: cubietruck-plus: Add AXP818 regulator nodesChen-Yu Tsai2017-11-021-12/+155
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds device nodes for all the regulators of the AXP818 PMIC. Sunxi common regulators are removed, and USB VBUS regulators are added. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sunxi: Add dtsi for AXP81x PMICChen-Yu Tsai2017-11-021-0/+139
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The AXP81x family of PMIC is used with the Allwinner A83T and H8 SoCs. This includes the AXP813 and AXP818. There is no discernible difference except the labeling. The AXP813 is paired with the A83T, while the AXP818 is paired with the H8. This patch adds a dtsi file for all the common bindings for these two PMICs. Currently this is just listing all the regulator nodes. The regulators are initialized based on their device node names. In the future this would be expanded to include power supplies and GPIO controllers. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sunxi: Restore EMAC changes (boards)Corentin Labbe2017-11-0210-0/+131
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we have a solution so we need to get back that was reverted. This patch restore all boards DT about dwmac-sun8i This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | ARM: dts: sunxi: h3/h5: represent the mdio switch used by sun8i-h3-emacCorentin Labbe2017-11-021-4/+27
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since dwmac-sun8i could use either an integrated PHY or an external PHY (which could be at same MDIO address), we need to represent this selection by a MDIO switch. Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
| | * | arm: dts: sunxi: h3/h5: Restore EMAC changesCorentin Labbe2017-11-021-0/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The original dwmac-sun8i DT bindings have some issue on how to handle integrated PHY and was reverted in last RC of 4.13. But now we have a solution so we need to get back that was reverted. This patch restore sunxi-h3-h5.dtsi This reverts partially commit fe45174b72ae ("arm: dts: sunxi: Revert EMAC changes") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
generated by cgit (git 2.34.1) at 2025-03-02 20:24:45 +0000