aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/boot
Commit message (Collapse)AuthorAgeFilesLines
* ARM: tegra: Rename sdhci nodes to mmcThierry Reding2020-06-2533-64/+64
| | | | | | | | | The new json-schema based validation tools require SD/MMC controller nodes to be named mmc. Rename all references to them. Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com> Cc: Philippe Schenker <philippe.schenker@toradex.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Drop display controller parent clocks on Tegra124Thierry Reding2020-06-251-6/+4
| | | | | | | | | | | | The parent clocks are determined by the output that will be used, not by the display controller that drives the output. On previous generations a simple RGB output used to be part of the display controller and hence an explicit parent clock needed to be assigned to the display controller to drive the RGB output. Starting with Tegra124, that RGB output has been dropped and the parent clock can therefore be removed from the display controller device tree nodes. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: The Tegra114 DC is not backwards-compatibleThierry Reding2020-06-231-2/+2
| | | | | | | | The display controller on Tegra114 is in fact not backwards-compatible with the instantiation found on earlier SoCs. Drop the misleading compatible string. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: gr3d is not backwards-compatibleThierry Reding2020-06-231-1/+1
| | | | | | | | The instantiation of gr3d in Tegra114 is not backwards-compatible with the version found on earlier chips. Remove the misleading compatible string. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: gr2d is not backwards-compatibleThierry Reding2020-06-231-1/+1
| | | | | | | | | | | | | | | The instantiation of gr2d in Tegra114 is not backwards-compatible with the version found on earlier chips. While the hardware IP is identical, the compatible string also describes the integration of the IP, which in the case of Tegra114 is slightly different in that it's part of the HEG power partition, whereas it wasn't previously. Drop the misleading compatible string so that drivers that support the older integrations cannot match on it. Since they wouldn't be able to control the power partition, such driver wouldn't be able to access any of the registers of the IP. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Add missing host1x propertiesThierry Reding2020-06-234-0/+8
| | | | | | | The host1x device tree bindings require the clock- and interrupt-names properties to be present, so add them where missing. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Do not mark host1x as simple busThierry Reding2020-06-234-4/+4
| | | | | | | The host1x is not a simple bus, so drop the corresponding compatible string. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: tn7: Use the correct DSI/CSI supplyThierry Reding2020-06-231-1/+1
| | | | | | | The correct DSI/CSI supply property is called vdd-dsi-csi-supply, so use that instead of the wrong vdd-supply property. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: roth: Use the correct DSI/CSI supplyThierry Reding2020-06-231-1/+1
| | | | | | | The correct DSI/CSI supply property is called vdd-dsi-csi-supply, so use that instead of the wrong vdd-supply property. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Remove battery-name propertyThierry Reding2020-06-231-1/+0
| | | | | | This property is not documented and will cause a validation failure. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Remove simple regulators busThierry Reding2020-06-2319-1353/+1122
| | | | | | | The standard way to do this is to list out the regulators at the top level. Adopt the standard way to fix validation. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Remove simple clocks busThierry Reding2020-06-2314-154/+56
| | | | | | | The standard way to do this is to list out the clocks at the top-level. Adopt the standard way to fix validation. Signed-off-by: Thierry Reding <treding@nvidia.com>
* ARM: tegra: Add missing clock-names for SDHCI on Tegra114Thierry Reding2020-06-231-0/+4
| | | | | | | The Tegra SDHCI controller bindings state that the clock-names property is required, so add the missing properties on Tegra114. Signed-off-by: Thierry Reding <treding@nvidia.com>
* Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds2020-06-131-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
| * kbuild: fix broken builds because of GZIP,BZIP2,LZOP variablesDenis Efremov2020-06-111-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Redefine GZIP, BZIP2, LZOP variables as KGZIP, KBZIP2, KLZOP resp. GZIP, BZIP2, LZOP env variables are reserved by the tools. The original attempt to redefine them internally doesn't work in makefiles/scripts intercall scenarios, e.g., "make GZIP=gzip bindeb-pkg" and results in broken builds. There can be other broken build commands because of this, so the universal solution is to use non-reserved env variables for the compression tools. Fixes: 8dfb61dcbace ("kbuild: add variables for compression tools") Signed-off-by: Denis Efremov <efremov@linux.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* | ARM: 8985/1: efi/decompressor: deal with HYP mode boot gracefullyArd Biesheuvel2020-06-131-0/+62
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | EFI on ARM only supports short descriptors, and given that it mandates that the MMU and caches are on, it is implied that booting in HYP mode is not supported. However, implementations of EFI exist (i.e., U-Boot) that ignore this requirement, which is not entirely unreasonable, given that it makes HYP mode inaccessible to the operating system. So let's make sure that we can deal with this condition gracefully. We already tolerate booting the EFI stub with the caches off (even though this violates the EFI spec as well), and so we should deal with HYP mode boot with MMU and caches either on or off. - When the MMU and caches are on, we can ignore the HYP stub altogether, since we can carry on executing at HYP. We do need to ensure that we disable the MMU at HYP before entering the kernel proper. - When the MMU and caches are off, we have to drop to SVC mode so that we can set up the page tables using short descriptors. In this case, we need to install the HYP stub as usual, so that we can return to HYP mode before handing over to the kernel proper. Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
* Merge tag 'usb-5.8-rc1' of ↵Linus Torvalds2020-06-076-509/+0
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB/PHY driver updates from Greg KH: "Here are the large set of USB and PHY driver updates for 5.8-rc1. Nothing huge, just lots of little things: - USB gadget fixes and additions all over the place - new PHY drivers - PHY driver fixes and updates - XHCI driver updates - musb driver updates - more USB-serial driver ids added - various USB quirks added - thunderbolt minor updates and fixes - typec updates and additions All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (245 commits) usb: dwc3: meson-g12a: fix USB2 PHY initialization on G12A and A1 SoCs usb: dwc3: meson-g12a: fix error path when fetching the reset line fails Revert "dt-bindings: usb: qcom,dwc3: Convert USB DWC3 bindings" Revert "dt-bindings: usb: qcom,dwc3: Add compatible for SC7180" Revert "dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver" USB: serial: ch341: fix lockup of devices with limited prescaler USB: serial: ch341: add basis for quirk detection CDC-ACM: heed quirk also in error handling USB: serial: option: add Telit LE910C1-EUX compositions usb: musb: Fix runtime PM imbalance on error usb: musb: jz4740: Prevent lockup when CONFIG_SMP is set usb: musb: mediatek: add reset FADDR to zero in reset interrupt handle usb: musb: use true for 'use_dma' usb: musb: start session in resume for host port usb: musb: return -ESHUTDOWN in urb when three-strikes error happened USB: serial: qcserial: add DW5816e QDL support thunderbolt: Add trivial .shutdown usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML ...
| * Merge tag 'usb-for-v5.8' of ↵Greg Kroah-Hartman2020-05-256-509/+0
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: USB: changes for v5.8 merge window Rather busy cycle. We have a total 99 non-merge commits going into v5.8 merge window. The majority of the changes are in dwc3 this around (31.7% of all changes). It's composed mostly Thinh's recent updates to get dwc3 to behave correctly with stream transfers. We have also have Roger's for Keystone platforms and Neil's updates for the meson glue layer. Apart from those, we have the usual set of non-critical fixes, new device IDs, spelling fixes all over the place. Signed-off-by: Felipe Balbi <balbi@kernel.org> * tag 'usb-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: (99 commits) usb: dwc3: keystone: Turn on USB3 PHY before controller dt-bindings: usb: ti,keystone-dwc3.yaml: Add USB3.0 PHY property dt-bindings: usb: convert keystone-usb.txt to YAML usb: dwc3: gadget: Check for prepared TRBs usb: gadget: Fix issue with config_ep_by_speed function usb: cdns3: ep0: delete the redundant status stage usb: dwc2: Update Core Reset programming flow. usb: gadget: fsl: Fix a wrong judgment in fsl_udc_probe() usb: gadget: fix potential double-free in m66592_probe. usb: cdns3: Fix runtime PM imbalance on error usb: gadget: lpc32xx_udc: don't dereference ep pointer before null check usb: dwc3: Increase timeout for CmdAct cleared by device controller USB: dummy-hcd: use configurable endpoint naming scheme usb: cdns3: gadget: assign interrupt number to USB gadget structure usb: gadget: core: sync interrupt before unbind the udc arm64: dts: qcom: sc7180: Add interconnect properties for USB arm64: dts: qcom: sdm845: Add interconnect properties for USB dt-bindings: usb: qcom,dwc3: Introduce interconnect properties for Qualcomm DWC3 driver ARM: dts: at91: Remove the USB EP child node dt-bindings: usb: atmel: Mark EP child node as deprecated ...
| | * ARM: dts: at91: Remove the USB EP child nodeGregory CLEMENT2020-05-256-509/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The endpoint configuration used to be stored in the device tree, however the configuration depend on the "version" of the controller itself. Then the EP child node are useless and describe as deprecated in the documentation binding: remove all the nodes from the SoC device tree file. Remove also the #address-cells and #size-cells properties that are no longer needed. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
* | | Merge tag 'kbuild-v5.8' of ↵Linus Torvalds2020-06-061-1/+1
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - fix warnings in 'make clean' for ARCH=um, hexagon, h8300, unicore32 - ensure to rebuild all objects when the compiler is upgraded - exclude system headers from dependency tracking and fixdep processing - fix potential bit-size mismatch between the kernel and BPF user-mode helper - add the new syntax 'userprogs' to build user-space programs for the target architecture (the same arch as the kernel) - compile user-space sample code under samples/ for the target arch instead of the host arch - make headers_install fail if a CONFIG option is leaked to user-space - sanitize the output format of scripts/checkstack.pl - handle ARM 'push' instruction in scripts/checkstack.pl - error out before modpost if a module name conflict is found - error out when multiple directories are passed to M= because this feature is broken for a long time - add CONFIG_DEBUG_INFO_COMPRESSED to support compressed debug info - a lot of cleanups of modpost - dump vmlinux symbols out into vmlinux.symvers, and reuse it in the second pass of modpost - do not run the second pass of modpost if nothing in modules is updated - install modules.builtin(.modinfo) by 'make install' as well as by 'make modules_install' because it is useful even when CONFIG_MODULES=n - add new command line variables, GZIP, BZIP2, LZOP, LZMA, LZ4, and XZ to allow users to use alternatives such as pigz, pbzip2, etc. * tag 'kbuild-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (96 commits) kbuild: add variables for compression tools Makefile: install modules.builtin even if CONFIG_MODULES=n mksysmap: Fix the mismatch of '.L' symbols in System.map kbuild: doc: rename LDFLAGS to KBUILD_LDFLAGS modpost: change elf_info->size to size_t modpost: remove is_vmlinux() helper modpost: strip .o from modname before calling new_module() modpost: set have_vmlinux in new_module() modpost: remove mod->skip struct member modpost: add mod->is_vmlinux struct member modpost: remove is_vmlinux() call in check_for_{gpl_usage,unused}() modpost: remove mod->is_dot_o struct member modpost: move -d option in scripts/Makefile.modpost modpost: remove -s option modpost: remove get_next_text() and make {grab,release_}file static modpost: use read_text_file() and get_line() for reading text files modpost: avoid false-positive file open error modpost: fix potential mmap'ed file overrun in get_src_version() modpost: add read_text_file() and get_line() helpers modpost: do not call get_modinfo() for vmlinux(.o) ...
| * | | kbuild: add variables for compression toolsDenis Efremov2020-06-061-1/+1
| | |/ | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allow user to use alternative implementations of compression tools, such as pigz, pbzip2, pxz. For example, multi-threaded tools to speed up the build: $ make GZIP=pigz BZIP2=pbzip2 Variables _GZIP, _BZIP2, _LZOP are used internally because original env vars are reserved by the tools. The use of GZIP in gzip tool is obsolete since 2015. However, alternative implementations (e.g., pigz) still rely on it. BZIP2, BZIP, LZOP vars are not obsolescent. The credit goes to @grsecurity. As a sidenote, for multi-threaded lzma, xz compression one can use: $ export XZ_OPT="--threads=0" Signed-off-by: Denis Efremov <efremov@linux.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
* | | Merge tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2020-06-04236-2829/+12200
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM devicetree updates from Arnd Bergmann: "This is the set of device tree changes, mostly covering new hardware support, with 577 patches touching a little over 500 files. There are five new Arm SoCs supported in this release, all of them for existing SoC families: - Realtek RTD1195, RTD1395 and RTD1619 -- three SoCs used in both NAS devices and Android Set-top-box designs, along with the "Horseradish", "Lion Skin" and "Mjolnir" reference platforms; the Mele X1000 and Xnano X5 set-top-boxes and the Banana Pi BPi-M4 single-board computer. - Renesas RZ/G1H (r8a7742) -- a high-end 32-bit industrial SoC and the iW-RainboW-G21D-Qseven-RZG1H board/SoM - Rockchips RK3326 -- low-end 64-bit SoC along with the Odroid-GO Advance game console Newly added machines on already supported SoCs are: - AMLogic S905D based Smartlabs SML-5442TW TV box - AMLogic S905X3 based ODROID-C4 SBC - AMLogic S922XH based Beelink GT-King Pro TV box - Allwinner A20 based Olimex A20-OLinuXino-LIME-eMMC SBC - Aspeed ast2500 based BMCs in Facebook x86 "Yosemite V2" and YADRO OpenPower P9 "Nicole" - Marvell Kirkwood based Check Point L-50 router - Mediatek MT8173 based Elm/Hana Chromebook laptops - Microchip SAMA5D2 "Industrial Connectivity Platform" reference board - NXP i.MX8m based Beacon i.MX8m-Mini SoM development kit - Octavo OSDMP15x based Linux Automation MC-1 development board - Qualcomm SDM630 based Xiaomi Redmi Note 7 phone - Realtek RTD1295 based Xnano X5 TV Box - STMicroelectronics STM32MP1 based Stinger96 single-board computer and IoT Box - Samsung Exynos4210 based based Samsung Galaxy S2 phone - Socionext Uniphier based Akebi96 SBC - TI Keystone based K2G Evaluation board - TI am5729 based Beaglebone-AI development board Include device descriptions for additional hardware support in existing SoCs and machines based on all major SoC platforms: - AMlogic Meson - Allwinner sunxi - Arm Juno/VFP/Vexpress/Integrator - Broadcom bcm283x/bcm2711 - Hisilicon hi6220 - Marvell EBU - Mediatek MT27xx, MT76xx, MT81xx and MT67xx - Microchip SAMA5D2 - NXP i.MX6/i.MX7/i.MX8 and Layerscape - Nvidia Tegra - Qualcomm Snapdragon - Renesas r8a77961, r8a7791 - Rockchips RK32xx/RK33xx - ST-Ericsson ux500 - STMicroelectronics SMT32 - Samsung Exynos and S5PV210 - Socionext Uniphier - TI OMAP5/DRA7 and Keystone" * tag 'arm-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (564 commits) ARM: dts: keystone: Rename "msmram" node to "sram" arm: dts: mt2712: add uart APDMA to device tree arm64: dts: mt8183: add mmc node arm64: dts: mt2712: add ethernet device node arm64: tegra: Make the RTC a wakeup source on Jetson Nano and TX1 ARM: dts: mmp3: Add the fifth SD HCI ARM: dts: berlin*: Fix up the SDHCI node names ARM: dts: mmp3: Fix USB & USB PHY node names ARM: dts: mmp3: Fix L2 cache controller node name ARM: dts: mmp*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa*: Fix up encoding of the /rtc interrupts property ARM: dts: pxa910: Fix the gpio interrupt cell number ARM: dts: pxa3xx: Fix up encoding of the /gpio interrupts property ARM: dts: pxa168: Fix the gpio interrupt cell number ARM: dts: pxa168: Add missing address/size cells to i2c nodes ARM: dts: dove: Fix interrupt controller node name ARM: dts: kirkwood: Fix interrupt controller node name arm64: dts: Add SC9863A emmc and sd card nodes arm64: dts: Add SC9863A clock nodes arm64: dts: mt6358: add PMIC MT6358 related nodes ...
| * \ \ Merge tag 'keystone_dts_for_5.7' of ↵Arnd Bergmann2020-06-022-0/+123
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt ARM: Keystone DTS updates for 5.7 Add display support for K2G EVM Board * tag 'keystone_dts_for_5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone-k2g-evm: add HDMI video support ARM: dts: keystone-k2g: Add DSS node Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | ARM: dts: keystone-k2g-evm: add HDMI video supportJyri Sarha2020-03-071-0/+101
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT nodes for HDMI video support for K2G EVM. The HDMI uses SiI9022 DPI as HDMI encoder. The DSS DPI is connected to SiI9022 HDMI encoder's video input and encoder's output goes to HDMI connector. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
| | * | | ARM: dts: keystone-k2g: Add DSS nodeJyri Sarha2020-03-071-0/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT node for DSS. K2G has DSS version 6. Keystone family DSS are somewhat different compered to the old OMAP family DSSes and the binding looks different too. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
| * | | | Merge tag 'keystone_dts_for_5.8' of ↵Arnd Bergmann2020-05-284-8/+8
| |\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into arm/dt ARM: dts: Keystone update for v5.8 - Rename "msmram" node to "sram" * tag 'keystone_dts_for_5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone: ARM: dts: keystone: Rename "msmram" node to "sram" Link: https://lore.kernel.org/r/1590638489-12023-2-git-send-email-santosh.shilimkar@oracle.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | ARM: dts: keystone: Rename "msmram" node to "sram"Krzysztof Kozlowski2020-05-274-8/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The device node name should reflect generic class of a device so rename the "msmram" node and its children to "sram". This will be also in sync with upcoming DT schema. No functional change. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
| * | | | | Merge tag 'imx-dt-5.8' of ↵Arnd Bergmann2020-05-2630-55/+384
| |\ \ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt i.MX device tree changes for 5.8: - A series from Anson Huang updating SRC devices to match bindings schema definition. - Correct CPU supply name and add cpu1 supply for i.MX7D. - Convert thermal device to use nvmem interface to get fuse data for imx6qdl and imx6sl. - A series from Tim Harvey to update imx6qdl-gw devices, adding support of LSM9DS1 IIO imu/magn, USB OTG, bcm4330-bt, etc. - Add input MUX for ENET2 MDIO into IMX7D pin functions. - Misc random device addition or update. * tag 'imx-dt-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits) ARM: dts: imx53-cx9020: Group port definitions for the dvi-converter ARM: dts: imx5: make src node name generic ARM: dts: imx50: Add src node interrupt ARM: dts: imx: make src node name generic ARM: dts: imx7d-pinfunc: add input mux for ENET2 mdio ARM: dts: imx6sl: Use nvmem interface to get fuse data ARM: dts: imx6qdl: Use nvmem interface to get fuse data ARM: dts: imx6qdl-gw5910: fix wlan regulator ARM: dts: imx6qdl-gw5910: add support for bcm4330-bt ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn support ARM: dts: imx6qdl-gw560x: add lsm9ds1 iio imu/magn support ARM: dts: imx53: Add src node interrupt ARM: dts: imx51: Add src node interrupt ARM: dts: imx50: Remove unused iomuxc-gpr node ARM: dts: imx6qdl-gw552x: add USB OTG support ARM: dts: imx6-sr-som: add ethernet PHY configuration arm: dts: ls1021atwr: Add QSPI node properties ARM: dts: e60k02: add interrupt for PMIC ARM: dts: colibri: introduce device trees with UHS-I support ARM: dts: imx7d: Add cpu1 supply ... Link: https://lore.kernel.org/r/20200523032516.11016-4-shawnguo@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | | | ARM: dts: imx53-cx9020: Group port definitions for the dvi-converterRicardo Cañuelo2020-05-201-11/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Group the port definitions of the dvi-converter in a 'ports' node to make it compliant with the ti,tfp410 binding. Signed-off-by: Ricardo Cañuelo <ricardo.canuelo@collabora.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx5: make src node name genericAnson Huang2020-05-203-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Node name should be generic, use "reset-controller" instead of "src" for i.MX5 SoCs src nodes. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx50: Add src node interruptAnson Huang2020-05-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Interrupt is a required property according to SRC binding, add it for SRC node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx: make src node name genericAnson Huang2020-05-205-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Node name should be generic, use "reset-controller" instead of "src" for i.MX6/i.MX7 SoCs src nodes. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx7d-pinfunc: add input mux for ENET2 mdioSteffen Trumtrar2020-05-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the missing input mux for ENET2 mdio. Without this setting, it is not possible to read the MDIO answers back from the PHY. Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx6sl: Use nvmem interface to get fuse dataAnson Huang2020-05-201-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although ocotp clock is always ON for i.MX6SL, OCOTP can be accessed directly, but since i.MX6SL nvmem interface is supported, and fsl,tempmon-data is deprecated, use it instead of getting fuse data by reading ocotp directly, this makes all i.MX6 SoCs aligned. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx6qdl: Use nvmem interface to get fuse dataAnson Huang2020-05-201-1/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although ocotp clock is always ON for i.MX6QDL, OCOTP can be accessed directly, but since i.MX6QDL nvmem interface is supported, and fsl,tempmon-data is deprecated, use it instead of getting fuse data by reading ocotp directly, this makes all i.MX6 SoCs aligned. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx6qdl-gw5910: fix wlan regulatorTim Harvey2020-05-201-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Connect the wl_reg regulator to usdhc2 such that it can be enabled and disabled as needed. There is no need for this to be always-on. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx6qdl-gw5910: add support for bcm4330-btTim Harvey2020-05-201-20/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Sterling-LWB has a BCM4330 which has a UART based bluetooth HCI. Add support for binding to the bcm_hci driver to take care of handling the shutdown gpio and loading firmware. Because the shutdown gpio is more of an enable than a regulator go ahead and replace the regulator with a shutdown-gpio. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn supportTim Harvey2020-05-201-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add one node for the accel/gyro i2c device and another for the separate magnetometer device in the lsm9ds1. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx6qdl-gw560x: add lsm9ds1 iio imu/magn supportTim Harvey2020-05-201-0/+31
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add one node for the accel/gyro i2c device and another for the separate magnetometer device in the lsm9ds1. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx53: Add src node interruptAnson Huang2020-05-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Interrupt is a required property according to SRC binding, add it for SRC node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx51: Add src node interruptAnson Huang2020-05-201-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Interrupt is a required property according to SRC binding, add it for SRC node. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx50: Remove unused iomuxc-gpr nodeFabio Estevam2020-05-201-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The iomuxc-gpr node is not used and causes the following dtc warning with W=1: arch/arm/boot/dts/imx50.dtsi:286.28-289.6: Warning (unique_unit_address): /soc/bus@50000000/iomuxc@53fa8000: duplicate unit-address (also used in node /soc/bus@50000000/iomuxc-gpr@53fa8000) Remove the node to fix the warning. Signed-off-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Abel Vesa <abel.vesa@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx6qdl-gw552x: add USB OTG supportTim Harvey2020-05-131-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The GW552x-B board revision adds USB OTG support. Enable the device-tree node and configure the OTG_ID pin. Signed-off-by: Tim Harvey <tharvey@gateworks.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx6-sr-som: add ethernet PHY configurationRussell King2020-04-291-0/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add ethernet PHY configuration ahead of removing the quirk that configures the clocking mode for the PHY. The RGMII delay is already set correctly. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | arm: dts: ls1021atwr: Add QSPI node propertiesKuldeep Singh2020-04-251-0/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | LS1021A-TWR has one micron "n25q128a13" flash of size 16M. Add QSPI node properties for it. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: e60k02: add interrupt for PMICAndreas Kemnade2020-04-251-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the PMIC driver now has IRQ handling, add the GPIO to listen to things like RTC alarm or ADC conversion completion. Signed-off-by: Andreas Kemnade <andreas@kemnade.info> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: colibri: introduce device trees with UHS-I supportIgor Opaniuk2020-04-144-1/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | 1. Introduce dtsi with overlay configuration for enabling UHS-I for Colibri iMX6S/DL V1.1x re-design. 2. Introduce new dts for the Colibri iMX6S/DL V1.1x on Colibri Evaluation Carrier Board V3.x. However, disable 1.8V for the Colibri Evaluation Board since this carrier board has 3.3V pull-ups on. 3. Provide proper configuration for VGEN3, which allows that rail to be automatically switched to 1.8 volts for proper UHS-I operation mode. Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx7d: Add cpu1 supplyAnson Huang2020-04-145-0/+20
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Each cpu-core is supposed to list its supply separately, add supply for cpu1. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx7: Correct CPU supply nameAnson Huang2020-04-143-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | i.MX7 uses cpufreq-dt driver which requires the CPU supply name to be either "cpu0-supply" or "cpu-supply", correct it. Signed-off-by: Anson Huang <Anson.Huang@nxp.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| | * | | | | ARM: dts: imx6q-dhcom: Add DH 560-200 display unit supportMarek Vasut2020-04-131-2/+113
| | |/ / / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add DT bits to support the DH 560-200 display unit, which can be plugged into the side of the PDK2 board. The display unit contains a display, EDT ETM0700G0EDH6 and an EDT FT5x06 touchscreen controller. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> To: linux-arm-kernel@lists.infradead.org Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
generated by cgit (git 2.34.1) at 2025-02-25 23:24:06 +0000