aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts/altera/socfpga_stratix10.dtsi
Commit message (Collapse)AuthorAgeFilesLines
* ARM: dts: socfpga: change qspi to "intel,socfpga-qspi"Dinh Nguyen2021-12-271-1/+1
| | | | | | | | | | | | | | | | | | | Because of commit 9cb2ff111712 ("spi: cadence-quadspi: Disable Auto-HW polling"), which does a write to the CQSPI_REG_WR_COMPLETION_CTRL register regardless of any condition. Well, the Cadence QuadSPI controller on Intel's SoCFPGA platforms does not implement the CQSPI_REG_WR_COMPLETION_CTRL register, thus a write to this register results in a crash! So starting with v5.16, I introduced the patch 98d948eb833 ("spi: cadence-quadspi: fix write completion support"), which adds the dts compatible "intel,socfpga-qspi" that is specific for versions that doesn't have the CQSPI_REG_WR_COMPLETION_CTRL register implemented. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- v3: revert back to "intel,socfpga-qspi" v2: use both "cdns,qspi-nor" and "cdns,qspi-nor-0010"
* arm64: dts: socfpga: Use generic "ngpios" rather than "snps,nr-gpios"Jisheng Zhang2021-01-041-2/+2
| | | | | | | | | | | | | | This is to remove similar errors as below: OF: /.../gpio-port@0: could not find phandle Commit 7569486d79ae ("gpio: dwapb: Add ngpios DT-property support") explained the reason of above errors well and added the generic "ngpios" property, let's use it. Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* arm64: dts: stratix10/agilex: add the ptp_ref clockDinh Nguyen2020-08-311-6/+6
| | | | | | Add the ptp_ref clock for the GMACs. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* Merge tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2020-08-031-0/+2
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM SoC DT updates from Arnd Bergmann: "As usual, there are many patches addressing minor issues in existing DTS files, such as DTC warnings, or adding support for additional peripherals. There are three added SoCs in existing product families: - Amazon: Alpine v3 is a 16-core Cortex-A72 SoC from Amazon's Annapurna Labs, otherwise known as AL73400 or first-generation Graviton, and following the already supported Cortex-A1`5 and Cortex-A57 based Alpine chips. This one is added together with the official Evaluation platform. - Qualcomm: The Snapdragon SDM630 platform is a family of mid-range mobile phone chips from 2017 based on Cortex-A53 or Kryo 260 CPUs. A total of five end-user products are added based on these, all Android phones from Sony: Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra. - Renesas: RZ/G2H (r8a774e1) is currently the top model in the Renesas RZ/G family, and apparently closely related to the RZ/G2N and RZ/G2M models we already support but has a faster GPU and additional on-chip peripherals. It is added along with the HopeRun HiHope RZ/G2H development board A small number of new boards for already supported SoCs also debut: - Allwinner sunxi: Only one new machine, revision v1.2 of the Pine64 PinePhone (non-Android) smartphone, containing minor changes compared to earlier versions. - Amlogic Meson: WeTek Core2 is an Amlogic S912 (GXM) based Set-top-box - Aspeed: EthanolX is AMD's EPYC data center rerence platform, using an ASpeed AST2600 baseboard management controller. - Mediatek: Lenovo IdeaPad Duet 10.1" (kukui/krane) is a new Chromebook based on the MT8183 (Helio P60t) SoC. - Nvidia Tegra: ASUS Google Nexus 7 and Acer Iconia Tab A500 are two Android tablets from around 2012 using Tegra 3 and Tegra 2, respectively. Thanks to PostmarketOS, these can now run mainline kernels and become useful again. The Jetson Xavier NX Developer Kit uses a SoM and carrier board for the Tegra194, their latest 64-bit chip based on Carmel CPU cores and Volta graphics. - NXP i.MX: Five new boards based on the 32-bit i.MX6 series are added: The MYiR MYS-6ULX single-board computer, and four different models of industrial computers from Protonic. - Qualcomm: MikroTik RouterBoard 3011 is a rackmounted router based on the 32-bit IPQ8064 networking SoC Three older phones get added, the Snapdragon 808 (msm8992) based Xiaomi Libra (Mi 4C) and Microsoft Lumia 950, originally running Windows Phone, and the Snapdragon 810 (msm8994) based Sony Xperia Z5. - Renesas: In addition to the HiHope RZ/G2H board mentioned above, we gain support for board versions 3.0 and 4.0 of the earlier RZ/G2M and RZ/G2N reference boards. Beacon EmbeddedWorks adds another SoM+Carrier development board for RZ/G2M. - Rockchips: Radxa Rock Pi N8 development board and the VMARC RK3288 SoM it is based on, using the high-end 32-bit rk3288 SoC. Notable updates to existing platforms are usually for added on-chip peripherals, including: - ASpeed AST2xxx (various) - Allwinner (cpufreq, thermal, Pinephone touchscreen) - Amlogic Meson (audio, gpu dvdfs, board updates) - Arm Versatile - Broadcom (board updates for switch ports, Raspberry pi clock updates) - Hisilicon (various) - Intel/Altera SoCFPGA (various) - Marvell Armada 7xxx/8xxx (smmu) - Marvell MMP (GPU on mmp2/mmp3) - Mediatek mt8183 (USB, pericfg) - NXP Layerscape (VPU, thermal, DSPI) - NXP i.MX (VPU, bindings, board updates) - Nvidia Tegra194 (GPU) - Qualcomm (GPU, Interconnect, ...) - Renesas R-Car (SPI, IPMMU, board updates) - STMicroelectronics STM32 (various) - Samsung Exynos (various) - Socionext Uniphier (updates to serial, and pcie) - TI K3 (serdes, usb3, audio, sd, chipid) - TI OMAP (IPU/DSP remoteproc changes, dropping platform data)" * tag 'arm-dt-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (605 commits) arm64: dts: meson: odroid-n2: add jack audio output support arm64: dts: meson: odroid-n2: enable audio loopback ARM: dts: berlin: Align L2 cache-controller nodename with dtschema arm64: dts: qcom: Add Microsoft Lumia 950 (Talkman) device tree arm64: dts: qcom: Add Xiaomi Libra (Mi 4C) device tree arm64: dts: qcom: msm8992: Add RPMCC node arm64: dts: qcom: msm8992: Add PSCI support. arm64: dts: qcom: msm8992: Add PMU node arm64: dts: qcom: msm8992: Add BLSP2_UART2 and I2C nodes arm64: dts: qcom: msm8992: Add SPMI PMIC arbiter device arm64: dts: qcom: msm8992: Add a SCM node arm64: dts: qcom: msm8992: Add a proper CPU map arm64: dts: qcom: bullhead: Move UART pinctrl to SoC arm64: dts: qcom: bullhead: Add qcom,msm-id arm64: dts: qcom: msm8992: Fix SDHCI1 arm64: dts: qcom: msm8992: Modernize the DTS style arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW) arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead. arm64: dts: qcom: msm8994: Add support for SMD RPM arm64: dts: qcom: msm8992: Add a label to rpm-requests ...
| * arm: dts: socfpga: add reset-names to spi nodeDinh Nguyen2020-07-181-0/+2
| | | | | | | | | | | | Add reset-names = "spi" to spi dts nodes. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* | arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschemaKrzysztof Kozlowski2020-07-151-4/+4
|/ | | | | | | | | | Fix dtschema validator warnings like: intc@fffc1000: $nodename:0: 'intc@fffc1000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* arm64: dts: agilex/stratix10: fix pmu interrupt numbersDinh Nguyen2019-12-161-4/+4
| | | | | | | | | | Fix up the correct interrupt numbers for the PMU unit on Agilex and Stratix10. Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi") Cc: linux-stable <stable@vger.kernel.org> Reported-by: Meng Li <Meng.Li@windriver.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* arm64: dts: stratix10: Add NAND device nodeDinh Nguyen2019-07-301-0/+16
| | | | | | Add the NAND device node to the base Stratix10 DTS. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* arm64: dts: agilex/stratix10: Add reset properties for DMADinh Nguyen2019-07-301-0/+2
| | | | | | | Add both the reset and reset-ocp properties for the DMA node on the Stratix10 and Agilex platforms. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds2019-07-191-5/+5
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull ARM Devicetree updates from Olof Johansson: "We continue to see a lot of new material. I've highlighted some of it below, but there's been more beyond that as well. One of the sweeping changes is that many boards have seen their ARM Mali GPU devices added to device trees, since the DRM drivers have now been merged. So, with the caveat that I have surely missed several great contributions, here's a collection of the material this time around: New SoCs: - Mediatek mt8183 (4x Cortex-A73 + 4x Cortex-A53) - TI J721E (2x Cortex-A72 + 3x Cortex-R5F + 3 DSPs + MMA) - Amlogic G12B (4x Cortex-A73 + 2x Cortex-A53) New Boards / platforms: - Aspeed BMC support for a number of new server platforms - Kontron SMARC SoM (several i.MX6 versions) - Novtech's Meerkat96 (i.MX7) - ST Micro Avenger96 board - Hardkernel ODROID-N2 (Amlogic G12B) - Purism Librem5 devkit (i.MX8MQ) - Google Cheza (Qualcomm SDM845) - Qualcomm Dragonboard 845c (Qualcomm SDM845) - Hugsun X99 TV Box (Rockchip RK3399) - Khadas Edge/Edge-V/Captain (Rockchip RK3399) Updated / expanded boards and platforms: - Renesas r7s9210 has a lot of new peripherals added - Fixes and polish for Rockchip-based Chromebooks - Amlogic G12A has a lot of peripherals added - Nvidia Jetson Nano sees various fixes and improvements, and is now at feature parity with TX1" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (586 commits) ARM: dts: gemini: Set DIR-685 SPI CS as active low ARM: dts: exynos: Adjust buck[78] regulators to supported values on Arndale Octa ARM: dts: exynos: Adjust buck[78] regulators to supported values on Odroid XU3 family ARM: dts: exynos: Move Mali400 GPU node to "/soc" ARM: dts: exynos: Fix imprecise abort on Mali GPU probe on Exynos4210 arm64: dts: qcom: qcs404: Add missing space for cooling-cells property arm64: dts: rockchip: Fix USB3 Type-C on rk3399-sapphire arm64: dts: rockchip: Update DWC3 modules on RK3399 SoCs arm64: dts: rockchip: enable rk3328 watchdog clock ARM: dts: rockchip: add display nodes for rk322x ARM: dts: rockchip: fix vop iommu-cells on rk322x arm64: dts: rockchip: Add support for Hugsun X99 TV Box arm64: dts: rockchip: Define values for the IPA governor for rock960 arm64: dts: rockchip: Fix multiple thermal zones conflict in rk3399.dtsi arm64: dts: rockchip: add core dtsi file for RK3399Pro SoCs arm64: dts: rockchip: improve rk3328-roc-cc rgmii performance. Revert "ARM: dts: rockchip: set PWM delay backlight settings for Minnie" ARM: dts: rockchip: Configure BT_DEV_WAKE in on rk3288-veyron arm64: dts: qcom: sdm845-cheza: add initial cheza dt ARM: dts: msm8974-FP2: Add vibration motor ...
| * Merge tag 'socfpga_dts_updates_for_v5.3' of ↵Olof Johansson2019-06-191-5/+5
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.3 - Use the new "altr,socfpga-stmmac-a10-s10" for the EMAC controllers on Arria10/Stratix10 - Add the ltc2497 i2c entry on the Arria10 devkit - Add the EMAC OCP reset property on the Arria10 * tag 'socfpga_dts_updates_for_v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: arria10: Add EMAC OCP reset property ARM: dts: socfpga: add ltc2497 on arria10 devkit arm64: dts: stratix10: use the "altr,socfpga-stmmac-a10-s10" binding ARM: dts: socfpga: use the "altr,socfpga-stmmac-a10-s10" binding Signed-off-by: Olof Johansson <olof@lixom.net>
| | * arm64: dts: stratix10: use the "altr,socfpga-stmmac-a10-s10" bindingDinh Nguyen2019-06-061-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Because of register and bits difference for setting PHY modes, PTP reference clock, and FPGA signalling, the Stratix10 SoC needs to use the "altr,socfpga-stmmac-a10-s10" binding to set the correct modes. On Stratix10, each EMAC has its own register for PHY modes, and they all have the same offset, thus we can use the 2nd parameter to specify the offsets for the FPGA signal bits. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* | | arm64: dts: stratix10: Add OCRAM EDAC nodeThor Thayer2019-06-201-0/+8
|/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the OCRAM ECC node with Stratix10 compatible string. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Cc: devicetree@vger.kernel.org Cc: James Morse <james.morse@arm.com> Cc: linux-edac <linux-edac@vger.kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: mchehab@kernel.org Cc: Rob Herring <robh+dt@kernel.org> Link: https://lkml.kernel.org/r/1556030197-24534-3-git-send-email-thor.thayer@linux.intel.com
* / treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201Thomas Gleixner2019-05-301-12/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Steve Winslow <swinslow@gmail.com> Reviewed-by: Richard Fontana <rfontana@redhat.com> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'mfd-next-5.2' of ↵Linus Torvalds2019-05-141-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "Core Framework: - Document (kerneldoc) core mfd_add_devices() API New Drivers: - Altera SOCFPGA System Manager - Maxim MAX77650/77651 PMIC - Maxim MAX77663 PMIC - ST Multi-Function eXpander (STMFX) New Device Support: - LEDs support in Intel Cherry Trail Whiskey Cove PMIC - RTC support in SAMSUNG Electronics S2MPA01 PMIC - SAM9X60 support in Atmel HLCDC (High-end LCD Controller) - USB X-Powers AXP 8xx PMICs - Integrated Sensor Hub (ISH) in ChromeOS EC - USB PD Logger in ChromeOS EC - AXP223 in X-Powers AXP series PMICs - Power Supply in X-Powers AXP 803 PMICs - Comet Lake in Intel Low Power Subsystem - Fingerprint MCU in ChromeOS EC - Touchpad MCU in ChromeOS EC - Move TI LM3532 support to LED New Functionality: - max77650, max77620: Add/extend DT support - max77620 power-off - syscon clocking - croc_ec host sleep event Fix-ups: - Trivial; Formatting, spelling, etc; Kconfig, sec-core, ab8500-debugfs - Remove unused functionality; rk808, da9063-* - SPDX conversion; da9063-*, atmel-*, - Adapt/add new register definitions; cs47l35-tables, cs47l90-tables, imx6q-iomuxc-gpr - Fix-up DT bindings; ti-lmu, cirrus,lochnagar - Simply obtaining driver data; ssbi, t7l66xb, tc6387xb, tc6393xb Bug Fixes: - Fix incorrect defined values; max77620, da9063 - Fix device initialisation; twl6040 - Reset device on init; intel-lpss - Fix build warnings when !OF; sun6i-prcm - Register OF match tables; tps65912-spi - Fix DMI matching; intel_quark_i2c_gpio" * tag 'mfd-next-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (65 commits) mfd: Use dev_get_drvdata() directly mfd: cros_ec: Instantiate properly CrOS Touchpad MCU device mfd: cros_ec: Instantiate properly CrOS FP MCU device mfd: cros_ec: Update the EC feature codes mfd: intel-lpss: Add Intel Comet Lake PCI IDs mfd: lochnagar: Add links to binding docs for sound and hwmon mfd: ab8500-debugfs: Fix a typo ("deubgfs") mfd: imx6sx: Add MQS register definition for iomuxc gpr dt-bindings: mfd: LMU: Fix lm3632 dt binding example mfd: intel_quark_i2c_gpio: Adjust IOT2000 matching mfd: da9063: Fix OTP control register names to match datasheets for DA9063/63L mfd: tps65912-spi: Add missing of table registration mfd: axp20x: Add USB power supply mfd cell to AXP803 mfd: sun6i-prcm: Fix build warning for non-OF configurations mfd: intel-lpss: Set the device in reset state when init platform/chrome: Add support for v1 of host sleep event mfd: cros_ec: Add host_sleep_event_v1 command mfd: cros_ec: Instantiate the CrOS USB PD logger driver mfd: cs47l90: Make DAC_AEC_CONTROL_2 readable mfd: cs47l35: Make DAC_AEC_CONTROL_2 readable ...
| *-. Merge branches 'ib-mfd-arm-leds-5.2', 'ib-mfd-gpio-input-leds-power-5.2', ↵Lee Jones2019-05-141-1/+4
| |\ \ | | | | | | | | | | | | | | | | | | | | 'ib-mfd-pinctrl-5.2-2' and 'ib-mfd-regulator-5.2', tag 'ib-mfd-arm-net-5.2' into ibs-for-mfd-merged Immutable branch between MFD, ARM and Net due for the 5.2 merge window
| | * | arm64: dts: stratix10: New System Manager compatibleThor Thayer2019-04-021-1/+1
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new compatible string defined for the Stratix10 System Manager. Remove syscon since it is not correct on this platform. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
* | | Merge tag 'edac_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds2019-05-061-12/+13
|\ \ \ | |_|/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull EDAC updates from Borislav Petkov: - amd64_edac: Family 0x17, models 0x30-.. enablement (Yazen Ghannam) - skx_*: Librarize it so that it can be shared between drivers (Qiuxu Zhuo) - altera: Stratix10 improvements (Thor Thayer) - The usual round of fixes, fixlets and cleanups * tag 'edac_for_5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: Revert "EDAC/amd64: Support more than two controllers for chip select handling" arm64: dts: stratix10: Use new Stratix10 EDAC bindings Documentation: dt: edac: Add Stratix10 Peripheral bindings Documentation: dt: edac: Fix Stratix10 IRQ bindings EDAC/altera, firmware/intel: Add Stratix10 ECC DBE SMC call EDAC/altera: Initialize peripheral FIFOs in probe() EDAC/altera: Do less intrusive error injection EDAC/amd64: Adjust printed chip select sizes when interleaved EDAC/amd64: Support more than two controllers for chip select handling EDAC/amd64: Recognize x16 symbol size EDAC/amd64: Set maximum channel layer size depending on family EDAC/amd64: Support more than two Unified Memory Controllers EDAC/amd64: Use a macro for iterating over Unified Memory Controllers EDAC/amd64: Add Family 17h Model 30h PCI IDs MAINTAINERS: Add entry for EDAC-I10NM MAINTAINERS: Update entry for EDAC-SKYLAKE EDAC, altera: Fix S10 Double Bit Error Notification EDAC, skx, i10nm: Make skx_common.c a pure library
| * | arm64: dts: stratix10: Use new Stratix10 EDAC bindingsThor Thayer2019-04-101-12/+13
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Use the new Stratix10 binding format for EDAC nodes. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: devicetree@vger.kernel.org Cc: linux-edac <linux-edac@vger.kernel.org> Cc: mark.rutland@arm.com Cc: mchehab@kernel.org Link: https://lkml.kernel.org/r/1554388597-28019-4-git-send-email-thor.thayer@linux.intel.com
* / arm64: dts: stratix10: add the sysmgr-syscon property from the gmac'sDinh Nguyen2019-03-211-0/+3
|/ | | | | | | | | | | | | | | | The gmac ethernet driver uses the "altr,sysmgr-syscon" property to configure phy settings for the gmac controller. Add the "altr,sysmgr-syscon" property to all gmac nodes. This patch fixes: [ 0.917530] socfpga-dwmac ff800000.ethernet: No sysmgr-syscon node found [ 0.924209] socfpga-dwmac ff800000.ethernet: Unable to parse OF data Cc: stable@vger.kernel.org Reported-by: Ley Foon Tan <ley.foon.tan@intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* Merge tag 'socfpga_dts_for_v5.1' of ↵Arnd Bergmann2019-02-151-0/+29
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/dt SoCFPGA DTS updates for v5.1 - Add SMMU node for Stratix10 - Add vendor prefix fo Novtech - Add a new 96Boards Chameleon96 board that uses a Cyclone5 SoCFPGA - Add missing reset properties for all IP on Cyclone5 and Arria10 * tag 'socfpga_dts_for_v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: ARM: dts: socfpga: update more missing reset properties ARM: dts: socfpga: update missing reset property peripherals ARM: dts: Add support for 96Boards Chameleon96 board dt-bindings: vendor-prefixes: Add Novtech Vendor Prefix arm64: dts: stratix10: Add Stratix10 SMMU support Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * arm64: dts: stratix10: Add Stratix10 SMMU supportThor Thayer2019-01-071-0/+29
| | | | | | | | | | | | | | | | | | | | Now there are device tree clocks for the ARM64 SMMU, add SMMU support to the Stratix10 Device Tree which includes adding the SMMU node and adding IOMMU stream ids to the SMMU peripherals. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* | arm64: dts: Remove inconsistent use of 'arm,armv8' compatible stringRob Herring2019-01-301-4/+4
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The 'arm,armv8' compatible string is only for software models. It adds little value otherwise and is inconsistently used as a fallback on some platforms. Remove it from those platforms. This fixes warnings generated by the DT schema. Reported-by: Michal Simek <michal.simek@xilinx.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Will Deacon <will.deacon@arm.com> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Acked-by: Nishanth Menon <nm@ti.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Acked-by: Chanho Min <chanho.min@lge.com> Acked-by: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Gregory CLEMENT <gregory.clement@bootlin.com> Acked-by: Thierry Reding <treding@nvidia.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Wei Xu <xuwei5@hisilicon.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Acked-by: Kevin Hilman <khilman@baylibre.com> Acked-by: Chunyan Zhang <zhang.lyra@gmail.com> Acked-by: Robert Richter <rrichter@cavium.com> Acked-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2018-12-311-2/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM Device-tree updates from Olof Johansson: "As usual, this is where the bulk of our changes end up landing each merge window. The individual updates are too many to enumerate, many many platforms have seen additions of device descriptions such that they are functionally more complete (in fact, this is often the bulk of updates we see). Instead I've mostly focused on highlighting the new platforms below as they are introduced. Sometimes the introduction is of mostly a fragment, that later gets filled in on later releases, and in some cases it's near-complete platform support. The latter is more common for derivative platforms that already has similar support in-tree. Two SoCs are slight outliers from the usual range of additions. Allwinner support for F1C100s, a quite old SoC (ARMv5-based) shipping in the Lychee Pi Nano platform. At the other end is NXP Layerscape LX2160A, a 16-core 2.2GHz Cortex-A72 SoC with a large amount of I/O aimed at infrastructure/networking. TI updates stick out in the diff stats too, in particular because they have moved the description of their L4 on-chip interconnect to devicetree, which opens up for removal of even more of their platform-specific 'hwmod' description tables over the next few releases. SoCs: - Qualcomm QCS404 (4x Cortex-A53) - Allwinner T3 (rebranded R40) and f1c100s (armv5) - NXP i.MX7ULP (1x Cortex-A7 + 1x Cortex-M4) - NXP LS1028A (2x Cortex-A72), LX2160A (16x Cortex-A72) New platforms: - Rockchip: Gru Scarlet (RK3188 Tablet) - Amlogic: Phicomm N1 (S905D), Libretech S805-AC - Broadcom: Linksys EA6500 v2 Wi-Fi router (BCM4708) - Qualcomm: QCS404 base platform and EVB - Qualcomm: Remove of Arrow SD600 - PXA: First PXA3xx DT board: Raumfeld - Aspeed: Facebook Backpack-CMM BMC - Renesas iWave G20D-Q7 (RZ/G1N) - Allwinner t3-cqa3t-bv3 (T3/R40) and Lichee Pi Nano (F1C100s) - Allwinner Emlid Neutis N5, Mapleboard MP130 - Marvell Macchiatobin Single Shot (Armada 8040, no 10GbE) - i.MX: mtrion emCON-MX6, imx6ul-pico-pi, imx7d-sdb-reva - VF610: Liebherr's BK4 device, ZII SCU4 AIB board - i.MX7D PICO Hobbit baseboard - i.MX7ULP EVK board - NXP LX2160AQDS and LX2160ARDB boards Other: - Coresight binding updates across the board - CPU cooling maps updates across the board" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (648 commits) ARM: dts: suniv: Fix improper bindings include patch ARM: dts: sunxi: Enable Broadcom-based Bluetooth for multiple boards arm64: dts: allwinner: a64: bananapi-m64: Add Bluetooth device node ARM: dts: suniv: Fix improper bindings include patch arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller arm64: dts: Remove unused properties from FSL QSPI driver nodes ARM: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller ARM: dts: imx6sx-sdb: Fix the reg properties for the FSL QSPI nodes ARM: dts: Remove unused properties from FSL QSPI driver nodes arm64: dts: ti: k3-am654: Enable main domain McSPI0 arm64: dts: ti: k3-am654: Add McSPI DT nodes arm64: dts: ti: k3-am654: Populate power-domain property for UART nodes arm64: dts: ti: k3-am654-base-board: Enable ECAP PWM arm64: dts: ti: k3-am65-main: Add ECAP PWM node arm64: dts: ti: k3-am654-base-board: Add I2C nodes arm64: dts: ti: am654-base-board: Add pinmux for main uart0 arm64: dts: ti: k3-am65: Add pinctrl regions dt-bindings: pinctrl: k3: Introduce pinmux definitions ARM: dts: exynos: Specify I2S assigned clocks in proper node ARM: dts: exynos: Add missing CPUs in cooling maps for Odroid X2 ...
| * Merge tag 'socfpga_dts_updates_for_v5.0' of ↵Olof Johansson2018-11-301-2/+1
| |\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/dt SoCFPGA DTS updates for v5.0 - Use SPDX license identifier for all SoCFPGA DTS files. - Remove dma-mask property as it has been deprecated. - Use tabs in DTS files. - Use the specific "altr,stratix10-rst-mgr" property for the Stratix10 reset manager. * tag 'socfpga_dts_updates_for_v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: stratix10: use "altr,stratix10-rst-mgr" binding ARM: dts: socfpga: use tabs for indentation arm: dts: socfpga: remove dma-mask property arm: dts: socfpga*.dts*: use SPDX-License-Identifier Signed-off-by: Olof Johansson <olof@lixom.net>
| | * arm64: dts: stratix10: use "altr,stratix10-rst-mgr" bindingDinh Nguyen2018-11-281-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The standard reset-simple driver the uses the "altr,rst-mgr" binding is not getting initialized early enough in the boot process, so timers that the kernel needs are still left in reset. Thus an early reset driver was created. This early reset driver is only for the SoCFPGA 32-bit platform. The Stratix10 platform does not need any of the timers that in reset to boot, thus we don't need to early reset driver. Therefore, use the "altr,stratix10-rst-mgr" binding for the reset-simple platform driver on the Stratix10 platform. Also remove the "altr,modrst-offset" property because the driver no longer needs it. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* | | arm64: dts: stratix10: add fpga manager and regionAlan Tull2018-11-261-0/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | Add the Stratix10 FPGA manager and a FPGA region to the device tree. Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Richard Gong <richard.gong@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | arm64: dts: stratix10: add stratix10 service driver binding to base dtsiRichard Gong2018-11-261-0/+21
|/ / | | | | | | | | | | | | | | | | Add Intel Stratix10 service layer to the device tree Signed-off-by: Richard Gong <richard.gong@intel.com> Signed-off-by: Alan Tull <atull@kernel.org> Acked-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* / arm64: dts: stratix10: fix multicast filteringAaro Koskinen2018-11-051-0/+3
|/ | | | | | | | | | | | On Stratix 10, the EMAC has 256 hash buckets for multicast filtering. This needs to be specified in DTS, otherwise the stmmac driver defaults to 64 buckets and initializes the filter incorrectly. As a result, e.g. valid IPv6 multicast traffic ends up being dropped. Fixes: 78cd6a9d8e15 ("arm64: dts: Add base stratix 10 dtsi") Cc: stable@vger.kernel.org Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2018-10-291-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "There are close to 800 indivudal changesets in this branch again, which feels like a lot. There are particularly many changes for the NVIDIA Tegra platform this time, in fact more than it has seen in the two years since the v4.9 merge window. Aside from this, it's been fairly normal, with lots of changes going into Renesas R-CAR, NXP i.MX, Allwinner Sunxi, Samsung Exynos, and TI OMAP. Most of the changes are for adding new features into existing boards, for brevity I'm only mentioning completely new machines and SoCs here. For the first time I think we have (slightly) more new 64-bit hardware than 32-bit: Two boards get added for TI OMAP: Moxa UC-2101 is an industrial computer, see https://www.moxa.com/product/UC-2100.htm; GTA04A5 is a minor variation of the motherboards of the GTA04 phone, see https://shop.goldelico.com/wiki.php?page=GTA04A5 Clearfog is a nice little board for quad-core Marvell Armada 8040 network processor, see https://www.solid-run.com/marvell-armada-family/clearfog-gt-8k/ Two additional server boards come with the Aspeed baseboard management controllers: Stardragon4800 is an arm64 reference platform made by HXT (based on Qualcomm's server chips), and TiogaPass is an Open Compute mainboard with x86 CPUs. Both use the ARM11 based AST2500 chips in the BMC. NXP i.MX usually sees a lot of new boards each release. This time there we only add one minor variant: ConnectCore 6UL SBC Pro uses the same SoM design as the ConnectCore 6UL SBC Express added later. However, there is a new chip, the i.MX6ULZ, which is an even smaller variant of the i.MX6ULL, with features removed. There is also support for the reference board design, the i.MX6ULZ 14x14 EVK. A new Raspberry Pi variant gets added, this one is the CM3 compute module based on bcm2837, it was launched in early 2017 but only now added to the kernel, both as 32-bit and as 64-bit files, as we tend to do for Raspberry Pi. On the Allwinner side, everything is again about cheap development boards, usually of the "Fruit Pi" variety. The new ones this time are: - Orange Pi Zero Plus2: http://www.orangepi.org/OrangePiZeroPlus2/ - Orange Pi One Plus: http://www.orangepi.org/OrangePiOneplus/ - Pine64 LTS: https://www.pine64.org/?product=pine-a64-lts - Banana Pi M2+ H5: http://www.banana-pi.org/m2plus.html The last one of these is now a 64-bit version of the earlier Banana Pi M2+ H3, with the same board layout. Similarly, for Rockchips, get get another variant of the 32-bit Asus Tinker board, the model 'S' based on rk3288, and three now boards based on the popular RK3399 chip: - ROC-RK3399-PC: https://libre.computer/products/boards/roc-rk3399-pc/ - Rock960: https://www.96boards.org/product/rock960/ - RockPro64: https://www.pine64.org/?page_id=61454 These are all quite powerful boards with lots of RAM and I/O, and the RK3399 is the same chip used in several Chromebooks. Finally, we get support for the PX30 (aka rk3326) chip, which is based on the low-end 64-bit Cortex-A35 CPU core. So far, only the evaluation board is supported. One more Banana Pi is added with a Mediatek chip: Banana Pi R64 is based on the MT7622 WiFi router platform, and the first product I've seen with a 64-bit Mediatek chip in that market: http://www.banana-pi.org/r64.html For HiSilicon, we gain support for the Hi3670 SoC and HiKey 370 development board, which are similar to the Hi3660 and Hikey 360 respectively, but add support for an NPU. Amlogic gets initial support for the Meson-G12A chip (S905D2), another quad-core Cortex-A53 SoC, and its evaluation platform. On the 32-bit side, we gain support for an actual end-user product, the Endless Computers Endless Mini based on Meson8b (S805), see https://endlessos.com/computers/ Qualcomm adds support for their MSM8998 SoC and evaluation platform. This chip is commonly known as the Snapdragon 835, and is used in high-end phones as well as low-end laptops. For Renesas, a very bare support for the r8a774a1 (RZ/G2M) is added, but no boards for this one. However, we do add boards for the previously added r8a77965 (R-Car M3-N): the M3NULCB Kingfisher and the M3NULCB Starter Kit Pro. While we have lots of DT changes for NVIDIA to update the existing files, the only board that gets added is the Toradex Colibri T20 on Colibri Evaluation Board for the old Tegra2. Synaptics add support for their AS370 SoC, which is part of the (formerly Marvell) Berlin line of set-top-box chips used e.g. in the various Google Chromecast. Only the .dtsi gets added at this point, no actual machines" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (721 commits) ARM: dts: socfgpa: remove ethernet aliases from dtsi arm64: dts: stratix10: add ethernet aliases dt-bindings: mediatek: Add bindig for MT7623 IOMMU and SMI dt-bindings: mediatek: Add JPEG Decoder binding for MT7623 dt-bindings: iommu: mediatek: Add binding for MT7623 dt-bindings: clock: mediatek: add support for MT7623 ARM: dts: mvebu: armada-385-db-88f6820-amc: auto-detect nand ECC properites ARM: dts: da850-lego-ev3: slow down A/DC as much as possible ARM: dts: da850-evm: Enable tca6416 on baseboard arm64: dts: uniphier: Add USB2 PHY nodes arm64: dts: uniphier: Add USB3 controller nodes ARM: dts: uniphier: Add USB2 PHY nodes ARM: dts: uniphier: Add USB3 controller nodes arm64: dts: meson-axg: s400: disable emmc arm64: dts: meson-axg: s400: add missing emmc pwrseq arm64: dts: clearfog-gt-8k: add PCIe slot description ARM: dts: at91: sama5d4_xplained: even nand memory partitions ARM: dts: at91: sama5d3_xplained: even nand memory partitions ARM: dts: at91: at91sam9x5cm: even nand memory partitions ARM: dts: at91: sama5d2_ptc_ek: fix bootloader env offsets ...
| * arm64: dts: stratix10: Correct System Manager register sizeThor Thayer2018-09-271-1/+1
| | | | | | | | | | | | | | | | | | Correct the register size of the System Manager node. Cc: stable@vger.kernel.org Fixes: 78cd6a9d8e154 ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* | Merge tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds2018-10-251-1/+36
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull EDAC updates from Borislav Petkov: "The EDAC tree was busier than usual this cycle as the shortlog below shows. Also, this pull request is carrying an ACPI DSM driver which is used to ask the platform to supply the DIMM location of a reported hardware error and thus simplify all the EDAC logic when trying to map the error address to the respective DIMM. Core EDAC updates: - amd64_edac: AMD family 0x17, models 0x10-0x2f support (Michael Jin) Hygon Dhyana support (Pu Wen) - sb_edac: New maintainer + fixes (Tony Luck) Error reporting improvements and fixes (Qiuxu Zhuo) - ghes_edac: SMBIOS handle type 17 for DIMM locating and per-DIMM error accounting (Fan Wu) - altera_edac: Stratix10 support and refactoring (Thor Thayer) Out of tree addition: - acpi_adxl: Address Translation interface using an ACPI DSM (Tony Luck) - the usual amount of other misc fixes and cleanups all over" * tag 'edac_for_4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: (22 commits) ACPI/ADXL: Add address translation interface using an ACPI DSM EDAC, thunderx: Fix memory leak in thunderx_l2c_threaded_isr() EDAC, skx_edac: Fix logical channel intermediate decoding EDAC, {i7core,sb,skx}_edac: Fix uncorrected error counting EDAC, altera: Work around int-to-pointer-cast warnings EDAC, amd64: Add Hygon Dhyana support EDAC: Raise the maximum number of memory controllers arm64: dts: stratix10: Add peripheral EDAC nodes EDAC, altera: Add Stratix10 peripheral support EDAC, altera: Merge Stratix10 into the Arria10 SDRAM probe routine arm64: dts: stratix10: Add SDRAM node EDAC, altera: Combine Stratix10 and Arria10 probe functions arm64: dts: stratix10: Additions to EDAC System Manager EDAC, i7core: Remove set but not used variable pvt EDAC, ghes: Use CPER module handles to locate DIMMs EDAC: Correct DIMM capacity unit symbol EDAC, sb_edac: Fix signedness bugs in *_get_ha() functions EDAC, sb_edac: Fix reporting for patrol scrubber errors EDAC, sb_edac: Return early on ADDRV bit and address type test MAINTAINERS: Update maintainer for drivers/edac/sb_edac.c ...
| * | arm64: dts: stratix10: Add peripheral EDAC nodesThor Thayer2018-09-251-1/+26
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the usb and ethernet peripheral ECC nodes using the rria10 format. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: mchehab@kernel.org Cc: devicetree@vger.kernel.org Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/1537883342-30180-7-git-send-email-thor.thayer@linux.intel.com
| * | arm64: dts: stratix10: Add SDRAM nodeThor Thayer2018-09-251-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the SDRAM node to follow the Arria10 layout and bindings. The Arria10 SDRAM functions expect this node. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: mchehab@kernel.org Cc: devicetree@vger.kernel.org Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/1537883342-30180-4-git-send-email-thor.thayer@linux.intel.com
| * | arm64: dts: stratix10: Additions to EDAC System ManagerThor Thayer2018-09-251-0/+4
| |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add the phandle, address, size and ranges to the Stratix10 System Manager node to match the existing Arria10 EDAC implementation. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Cc: robh+dt@kernel.org Cc: mark.rutland@arm.com Cc: mchehab@kernel.org Cc: devicetree@vger.kernel.org Cc: linux-edac@vger.kernel.org Link: https://lkml.kernel.org/r/1537883342-30180-2-git-send-email-thor.thayer@linux.intel.com
* / arm64: dts: stratix10: Support Ethernet Jumbo frameThor Thayer2018-10-221-0/+6
|/ | | | | | | | | Properly specify the RX and TX FIFO size which is important for Jumbo frames. Update the max-frame-size to support Jumbo frames. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* arm64: dts: stratix10: Add SPI node clocks for Stratix10Thor Thayer2018-07-021-0/+2
| | | | | | | | Add the required clocks for the new Stratix10 clock bindings to the SPI nodes. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* arm64: dts: stratix10: add OCP reset property for ethernetDinh Nguyen2018-07-021-6/+6
| | | | | | Add the additional OCP reset property for the ethernet nodes. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* arm64: dts: stratix10: fill in clocks field for usb and watchdogDinh Nguyen2018-07-021-0/+6
| | | | | | Populate the clocks field for USB and watchdog. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* arm64: dts: stratix10: Add QSPI support for Stratix10Thor Thayer2018-07-021-0/+21
| | | | | | | | | | | Add qspi_clock The qspi_clk frequency is updated by U-Boot before starting Linux. Add QSPI interface node. Add QSPI flash memory child node. Setup the QSPI memory in 2 partitions. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* arm64: dts: stratix10: Fix SPI nodes for Stratix10Thor Thayer2018-06-261-4/+2
| | | | | | | | | | | Remove the unused bus-num node and change num-chipselect to num-cs to match SPI bindings. Cc: stable@vger.kernel.org Fixes: 78cd6a9d8e154 ("arm64: dts: Add base stratix 10 dtsi") Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* arm64: dts: stratix10: add sdram eccThor Thayer2018-05-081-0/+12
| | | | | | | | Add the Stratix10 ECC Manager and SDRAM EDAC nodes to the device tree. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* arm64: dts: stratix10: Add PL330 DMAC to Stratix10 dtsGraham Moore2018-04-161-0/+19
| | | | | | | | The Stratix10 SoCFPGA uses the PL330 DMAC. This patch adds the PL330 DMAC to the Stratix10 device tree. Signed-off-by: Graham Moore <graham.moore@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* arm64: dts: stratix10: enable i2c, add i2c periperalsAlan Tull2018-04-161-0/+5
| | | | | | | | | | | | | | | | | | Add clock for i2c Enable i2c1 Set the i2c bus speed to 100KHz Add the following i2c peripherals * ds1339 RTC * 24c32 EEPROM * max1619 temperature monitor * ltc2497 ADC * Add a fixed regulator for the ADC's Vref. This requires Dinh Nguyen's Stratix10 clock driver ("clk: socfpga: stratix10: add clock driver for Stratix10 platform") Signed-off-by: Alan Tull <atull@kernel.org> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* arm64: dts: stratix10: use clock bindings for the Stratix10 platformDinh Nguyen2018-04-161-2/+45
| | | | | | | | | | | | | | | | | | | | | | | | | Use the clock bindings for the Stratix10 SoC. This includes changing the old binding of "intc,clk-s10-mgr" to "intel,stratix10-clkmgr". The reason that this can be done is that there are currently no clock driver for Stratix10, thus there are no consumers of the old binding. So changing the binding will not break any legacy code. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> --- v7: - move PLL out of clkmgr node and into DT root v6: - no changes v5: - no changes v4: - remove '_' in name of clock nodes - use clock-controller in SoCDK node in dts file v3: - use the correct vendor prefix - explain the binding change v2: - use a single clock binding for the clock controller
* Merge tag 'armsoc-dt' of ↵Linus Torvalds2018-02-011-6/+10
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC device tree updates from Arnd Bergmann: "We get a moderate number of new machines this time, and only one new SoC variant (Actions S700): Actions: - S700 Soc and CubieBoard7 development board - Allo.com Sparky Single-board-computer Allwinner: - Orange Pi R1 development board - Libre Computer Board ALL-H3-CC H3 single-board computer ASpeed ast2x00: - Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500 - Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500 - Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400 AT91: - Axentia Nattis/Natte digital signage - sama5d2 PTC-ek Evaluation board Freescale/NXP i.MX: - SolidRun Humminboard2 development board - Variscite DART-MX6 SoM and Carrier-board - Technologic TS-4600 and TS-7970 development board - Toradex Colibri iMX7D SoM board - v1.5 variant of Solidrun Cubox-i and Hummingboard Freescale/NXP Layerscape: - Moxa UC-8410A Series industrial computer Gemini: - D-Link DNS-313 NAS enclosure OMAP: - LogicPD OMAP35xx SOM-LV devkit - LogicPD OMAP35xx Torpedo devkit Renesas: - r8a77970 (V3M) Starter Kit board - r8a7795 (M3-W) Salvator-XS board We finally managed to get the dtc warnings under control, with no more build-time warnings for bad device tree files. This includes fixes for the majority of platforms, including nomadik, samsung, lpc32xx, STi, spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood, renesas, hisilicon, and broadcom. Files get rearranged on a few platforms, in particular the Marvell Armada 7K/8K device tree files are changed in preparation for future SoC support, based on more than two of the same chips in one package, and some boards get renamed for oxnas for consistency. Finally, many existing SoCs gain descriptions for additional on-chip devices that we can now support with kernel drivers: - Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG) - Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi) - Aspeed clk controller support - Freescale LS1088A, LS1021A device support - Gemini Ethernet, PCI, TVE, panel - Keystone gpio, qspi, more uarts - Mediatek cpufreq, regulator, clock, reset - Marvell thermal, cpufreq, nand - Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu - Rockchip Mipi, GPU, display - Samsung Exynos5433 PMU, power domain, nfc - Spreadtrum: sc9860 clocks - Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..." * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits) arm64: dts: stratix10: fix SPI settings ARM: dts: socfpga: add i2c reset signals arm64: dts: stratix10: add USB ECC reset bit arm64: dts: stratix10: enable USB on the devkit ARM: dts: socfpga: disable over-current for Arria10 USB devkit ARM: dts: Nokia N9: add support for up/down keys in the dts ARM: dts: nomadik: add interrupt-parent for clcd ARM: dts: Add ethernet to a bunch of platforms ARM: dts: Add ethernet to the Gemini SoC ARM: dts: rename oxnas dts files ARM: dts: s5pv210: add interrupt-parent for ohci ARM: lpc3250: fix uda1380 gpio numbers ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones ARM: dts: n900: Add aliases for lcd and tvout displays ARM: dts: Update ti-sysc data for existing users ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string arm: spear13xx: Fix spics gpio controller's warning arm: spear13xx: Fix dmas cells ...
| * arm64: dts: stratix10: fix SPI settingsThor Thayer2018-01-231-2/+6
| | | | | | | | | | | | | | Correct the SPI Master node settings. Signed-off-by: Thor Thayer <thor.thayer@linux.intel.com> Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
| * arm64: dts: stratix10: add USB ECC reset bitDinh Nguyen2018-01-231-4/+4
| | | | | | | | | | | | | | The USB IP on the Stratix10 SoC needs the USB OCP(ecc) bit to get de-asserted as well for the USB IP to work properly. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* | arm64: dts: socfpga: add missing interrupt-parentArnd Bergmann2018-01-111-0/+1
|/ | | | | | | | | | | | | The PMU node has no working interrupt, as shown by this dtc warning: arch/arm64/boot/dts/altera/socfpga_stratix10_socdk.dtb: Warning (interrupts_property): Missing interrupt-parent for /pmu This adds an interrupt-parent property so we can correct parse that interrupt number. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Dinh Nguyen <dinguyen@kernel.org> Signed-off-by: Olof Johansson <olof@lixom.net>
* arm64: dts: stratix10: fix interrupt number for gpio1Dinh Nguyen2017-10-111-1/+1
| | | | | | The gpio1 node's interrupt number should be 111. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
generated by cgit (git 2.34.1) at 2025-02-24 04:24:51 +0000