aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm64/boot/dts
Commit message (Collapse)AuthorAgeFilesLines
* Merge tag 'soc-fixes-5.17-4' of ↵Linus Torvalds2022-03-193-36/+36
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fix from Arnd Bergmann: "Here is one last regression fix for 5.17, reverting a patch that went into 5.16 as a cleanup that ended up breaking external interrupts on Layerscape chips. The revert makes it work again, but also reintroduces a build time warning about the nonstandard DT binding that will have to be dealt with in the future" * tag 'soc-fixes-5.17-4' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: Revert "arm64: dts: freescale: Fix 'interrupt-map' parent address cells"
| * Revert "arm64: dts: freescale: Fix 'interrupt-map' parent address cells"Vladimir Oltean2022-03-163-36/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 869f0ec048dc8fd88c0b2003373bd985795179fb. That updated the expected device tree binding format for the ls-extirq driver, without also updating the parsing code (ls_extirq_parse_map) to the new format. The context is that the ls-extirq driver uses the standard "interrupt-map" OF property in a non-standard way, as suggested by Rob Herring during review: https://lore.kernel.org/lkml/20190927161118.GA19333@bogus/ This has turned out to be problematic, as Marc Zyngier discovered through commit 041284181226 ("of/irq: Allow matching of an interrupt-map local to an interrupt controller"), later fixed through commit de4adddcbcc2 ("of/irq: Add a quirk for controllers with their own definition of interrupt-map"). Marc's position, expressed on multiple opportunities, is that: (a) [ making private use of the reserved "interrupt-map" name in a driver ] "is wrong, by the very letter of what an interrupt-map means. If the interrupt map points to an interrupt controller, that's the target for the interrupt." https://lore.kernel.org/lkml/87k0g8jlmg.wl-maz@kernel.org/ (b) [ updating the driver's bindings to accept a non-reserved name for this property, as an alternative, is ] "is totally pointless. These machines have been in the wild for years, and existing DTs will be there *forever*." https://lore.kernel.org/lkml/87ilvrk1r0.wl-maz@kernel.org/ Considering the above, the Linux kernel has quirks in place to deal with the ls-extirq's non-standard use of the "interrupt-map". These quirks may be needed in other operating systems that consume this device tree, yet this is seen as the only viable solution. Therefore, the premise of the patch being reverted here is invalid. It doesn't matter whether the driver, in its non-standard use of the property, complies to the standard format or not, since this property isn't expected to be used for interrupt translation by the core. This change restores LS1088A, LS2088A/LS2085A and LX2160A to their previous bindings, which allows these systems to continue to use external interrupt lines with the correct polarity. Fixes: 869f0ec048dc ("arm64: dts: freescale: Fix 'interrupt-map' parent address cells") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | Merge tag 'soc-fixes-5.17-3' of ↵Linus Torvalds2022-03-106-11/+42
|\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "Here is a third set of fixes for the soc tree, well within the expected set of changes. Maintainer list changes: - Krzysztof Kozlowski and Jisheng Zhang both have new email addresses - Broadcom iProc has a new git tree Regressions: - Robert Foss sends a revert for a Mediatek DPI bridge patch that caused an inadvertent break in the DT binding - mstar timers need to be included in Kconfig Devicetree fixes for: - Aspeed ast2600 spi pinmux - Tegra eDP panels on Nyan FHD - Tegra display IOMMU - Qualcomm sm8350 UFS clocks - minor DT changes for Marvell Armada, Qualcomm sdx65, Qualcomm sm8450, and Broadcom BCM2711" * tag 'soc-fixes-5.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0 MAINTAINERS: Update Jisheng's email address Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint" dt-bindings: drm/bridge: anx7625: Revert DPI support ARM: dts: aspeed: Fix AST2600 quad spi group MAINTAINERS: update Krzysztof Kozlowski's email MAINTAINERS: Update git tree for Broadcom iProc SoCs ARM: tegra: Move Nyan FHD panels to AUX bus arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias ARM: mstar: Select HAVE_ARM_ARCH_TIMER soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint ARM: boot: dts: bcm2711: Fix HVS register range arm64: dts: qcom: c630: disable crypto due to serror arm64: dts: qcom: sm8450: fix apps_smmu interrupts arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb arm64: dts: qcom: sm8350: Correct UFS symbol clocks arm64: tegra: Disable ISO SMMU for Tegra194 Revert "dt-bindings: arm: qcom: Document SDX65 platform and boards"
| * \ Merge tag 'mvebu-fixes-5.17-2' of ↵Arnd Bergmann2022-03-102-2/+7
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes mvebu fixes for 5.17 (part 2) Allow using old PCIe card on Armada 37xx * tag 'mvebu-fixes-5.17-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu: arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0 Link: https://lore.kernel.org/r/87bkydj4fn.fsf@BL-laptop Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0Pali Rohár2022-03-102-2/+7
| | |/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Legacy and old PCI I/O based cards do not support 32-bit I/O addressing. Since commit 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property") kernel can set different PCIe address on CPU and different on the bus for the one A37xx address mapping without any firmware support in case the bus address does not conflict with other A37xx mapping. So remap I/O space to the bus address 0x0 to enable support for old legacy I/O port based cards which have hardcoded I/O ports in low address space. Note that DDR on A37xx is mapped to bus address 0x0. And mapping of I/O space can be set to address 0x0 too because MEM space and I/O space are separate and so do not conflict. Remapping IO space on Turris Mox to different address is not possible to due bootloader bug. Signed-off-by: Pali Rohár <pali@kernel.org> Reported-by: Arnd Bergmann <arnd@arndb.de> Fixes: 76f6386b25cc ("arm64: dts: marvell: Add Aardvark PCIe support for Armada 3700") Cc: stable@vger.kernel.org # 64f160e19e92 ("PCI: aardvark: Configure PCIe resources from 'ranges' DT property") Cc: stable@vger.kernel.org # 514ef1e62d65 ("arm64: dts: marvell: armada-37xx: Extend PCIe MEM space") Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
| * | Revert "arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint"Robert Foss2022-03-081-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 32568ae37596b529628ac09b875f4874e614f63f. Signed-off-by: Robert Foss <robert.foss@linaro.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | Merge tag 'tegra-for-5.17-arm64-dt-fixes' of ↵Arnd Bergmann2022-03-071-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes arm64: tegra: Device tree fixes for v5.17 This contains a single, last-minute fix to disable the display SMMU by default because under some circumstances leaving it enabled by default can cause SMMU faults on boot. * tag 'tegra-for-5.17-arm64-dt-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: arm64: tegra: Disable ISO SMMU for Tegra194 Link: https://lore.kernel.org/r/20220307182120.2169598-1-thierry.reding@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | arm64: tegra: Disable ISO SMMU for Tegra194Jon Hunter2022-01-271-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit e762232f9466 ("arm64: tegra: Add ISO SMMU controller for Tegra194") added the ISO SMMU for display devices on Tegra194. The SMMU is enabled by default but not hooked up to the display controllers yet because we do not have a way to pass frame-buffer memory from the bootloader to the kernel. However, even though the SMMU is not hooked up to the display controllers' SMMU faults are being seen if a display is connected. Therefore, keep the ISO SMMU disabled by default for now. Fixes: e762232f9466 ("arm64: tegra: Add ISO SMMU controller for Tegra194") Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com>
| * | | arm64: dts: armada-3720-turris-mox: Add missing ethernet0 aliasPali Rohár2022-03-011-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | U-Boot uses ethernet* aliases for setting MAC addresses. Therefore define also alias for ethernet0. Fixes: 7109d817db2e ("arm64: dts: marvell: add DTS for Turris Mox") Signed-off-by: Pali Rohár <pali@kernel.org> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | Merge tag 'v5.17-fixes-tag' of ↵Arnd Bergmann2022-03-011-0/+2
| |\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux into arm/fixes - Set display pipeline to DSI on mt8183 kukui jacuzzi - Fix display for mt8192 based boards by fixing the routing table * tag 'v5.17-fixes-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/matthias.bgg/linux: soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpoint Link: https://lore.kernel.org/r/8eb8510d-c597-4fee-e4b3-924b6d4bb3be@gmail.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | arm64: dts: mt8183: jacuzzi: Fix bus properties in anx's DSI endpointNícolas F. R. A. Prado2022-02-281-0/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | mt8183-kukui-jacuzzi has an anx7625 bridge connected to the output of its DSI host. However, after commit fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature"), a bus-type property started being required in the endpoint node by the driver to indicate whether it is DSI or DPI. Add the missing bus-type property and set it to 5 (V4L2_FWNODE_BUS_TYPE_PARALLEL) so that the driver has its input configured to DSI and the display pipeline can probe correctly. While at it, also set the data-lanes property that was also introduced in that same commit, so that we don't rely on the default value. Fixes: fd0310b6fe7d ("drm/bridge: anx7625: add MIPI DPI input feature") Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220214200507.2500693-1-nfraprado@collabora.com Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
| * | | | Merge tag 'qcom-arm64-fixes-for-5.17' of ↵Arnd Bergmann2022-03-013-8/+33
| |\ \ \ \ | | |/ / / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/fixes Qualcomm ARM64 DeviceTree fixes for 5.17 This starts off by fixing an issue introduced in a bug fix in the global clock controller, where the symbol clocks for UFS would end up picking the wrong parent clock which breaks UFS. It then makes sure that the reference clock for the USB blocks are enabled, even with booting without clk_ignore_unused. It corrects the apps SMMU interrupts defintion by adding a missing interrupt in the list. Lastly it disables the Qualcomm crypto hardware (for now) on the Lenovo Yoga C630, to prevent the cryptomanager tests during boot from crashing the device. * tag 'qcom-arm64-fixes-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: arm64: dts: qcom: c630: disable crypto due to serror arm64: dts: qcom: sm8450: fix apps_smmu interrupts arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usb arm64: dts: qcom: sm8350: Correct UFS symbol clocks Link: https://lore.kernel.org/r/20220301033526.1801295-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| | * | | arm64: dts: qcom: c630: disable crypto due to serrorSteev Klimaszewski2022-02-141-0/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disable the crypto block due to it causing an SError in qce_start() on the C630, which happens upon every boot when cryptomanager tests are enabled. Signed-off-by: Steev Klimaszewski <steev@kali.org> [bjorn: Reworked commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20211105035235.2392-1-steev@kali.org
| | * | | arm64: dts: qcom: sm8450: fix apps_smmu interruptsJonathan Marek2022-01-311-1/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update interrupts in apps_smmu to match downstream. This is fixes apps_smmu failing to probe when running at EL2 (expects 96 context interrupts) Fixes: 892d5395396d ("arm64: dts: qcom: sm8450: add smmu nodes") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220122162932.7686-2-jonathan@marek.ca
| | * | | arm64: dts: qcom: sm8450: enable GCC_USB3_0_CLKREF_EN for usbJonathan Marek2022-01-311-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB doesn't work at all without this clock enabled. This fixes USB when not using clk_ignore_unused. Fixes: 19fd04fb9247 ("arm64: dts: qcom: sm8450: Add usb nodes") Signed-off-by: Jonathan Marek <jonathan@marek.ca> Reviewed-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20220122162932.7686-1-jonathan@marek.ca
| | * | | arm64: dts: qcom: sm8350: Correct UFS symbol clocksBjorn Andersson2022-01-311-5/+23
| | | |/ | | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The introduction of '9a61f813fcc8 ("clk: qcom: regmap-mux: fix parent clock lookup")' broke UFS support on SM8350. The cause for this is that the symbol clocks have a specified rate in the "freq-table-hz" table in the UFS node, which causes the UFS code to request a rate change, for which the "bi_tcxo" happens to provide the closest rate. Prior to the change in regmap-mux it was determined (incorrectly) that no change was needed and everything worked. The rates of 75 and 300MHz matches the documentation for the symbol clocks, but we don't represent the parent clocks today. So let's mimic the configuration found in other platforms, by omitting the rate for the symbol clocks as well to avoid the rate change. While at it also fill in the dummy symbol clocks that was dropped from the GCC driver as it was upstreamed. Fixes: 59c7cf814783 ("arm64: dts: qcom: sm8350: Add UFS nodes") Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://lore.kernel.org/r/20211222162058.3418902-1-bjorn.andersson@linaro.org
* | | | Merge tag 'imx-fixes-5.17-2' of ↵Arnd Bergmann2022-02-242-2/+1
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.17, round 2: - Drop reset signal from i.MX8MM vpumix power domain to fix a system hang. - Fix a dtbs_check warning caused by #thermal-sensor-cells in i.MX8ULP device tree. - Fix a clock disabling imbalance in gpcv2 driver. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | arm64: dts: imx8ulp: Set #thermal-sensor-cells to 1 as requiredSudeep Holla2022-02-141-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The SCMI binding clearly states the value of #thermal-sensor-cells must be 1. However arch/arm64/boot/dts/freescale/imx8ulp.dtsi sets it 0 which results in the following warning with dtbs_check: | arch/arm64/boot/dts/freescale/imx8ulp-evk.dt.yaml: scmi: | protocol@15:#thermal-sensor-cells:0:0: 1 was expected | From schema: Documentation/devicetree/bindings/firmware/arm,scmi.yaml Fix it by setting it to 1 as required. Cc:Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Acked-by: Peng Fan <peng.fan@nxp.com> Fixes: a38771d7a49b ("arm64: dts: imx8ulp: add scmi firmware node") Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| * | | | arm64: dts: imx8mm: Fix VPU HangingAdam Ford2022-02-141-1/+0
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The vpumix power domain has a reset assigned to it, however when used, it causes a system hang. Testing has shown that it does not appear to be needed anywhere. Fixes: d39d4bb15310 ("arm64: dts: imx8mm: add GPC node") Signed-off-by: Adam Ford <aford173@gmail.com> Reviewed-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* | | | Merge tag 'v5.17-rockchip-dtsfixes1' of ↵Arnd Bergmann2022-02-249-18/+42
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes Fix the display-port-sound on Gru devices, DDR voltage on the Quartz-A board, fix emmc signal-integrity and usb OTG mode on rk3399-puma as well as a number of dtschema fixes to make the reduce the number of errors. * tag 'v5.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: ARM: dts: rockchip: fix a typo on rk3288 crypto-controller ARM: dts: rockchip: reorder rk322x hmdi clocks arm64: dts: rockchip: reorder rk3399 hdmi clocks arm64: dts: rockchip: align pl330 node name with dtschema arm64: dts: rockchip: fix rk3399-puma eMMC HS400 signal integrity arm64: dts: rockchip: fix Quartz64-A ddr regulator voltage arm64: dts: rockchip: Switch RK3399-Gru DP to SPDIF output arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG mode arm64: dts: rockchip: drop pclk_xpcs from gmac0 on rk3568 arm64: dts: rockchip: fix dma-controller node names on rk356x Link: https://lore.kernel.org/r/1973741.CViHJPHrxy@phil Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | arm64: dts: rockchip: reorder rk3399 hdmi clocksSascha Hauer2022-02-081-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The binding specifies the clock order to "cec", "grf", "vpll". Reorder the clocks accordingly. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20220126145549.617165-19-s.hauer@pengutronix.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * | | | arm64: dts: rockchip: align pl330 node name with dtschemaKrzysztof Kozlowski2022-01-302-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Fixes dtbs_check warnings like: dmac@ff240000: $nodename:0: 'dmac@ff240000' does not match '^dma-controller(@.*)?$' Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20220129175429.298836-1-krzysztof.kozlowski@canonical.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * | | | arm64: dts: rockchip: fix rk3399-puma eMMC HS400 signal integrityJakob Unterwurzacher2022-01-301-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | There are signal integrity issues running the eMMC at 200MHz on Puma RK3399-Q7. Similar to the work-around found for RK3399 Gru boards, lowering the frequency to 100MHz made the eMMC much more stable, so let's lower the frequency to 100MHz. It might be possible to run at 150MHz as on RK3399 Gru boards but only 100MHz was extensively tested. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@theobroma-systems.com> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20220119134948.1444965-1-quentin.schulz@theobroma-systems.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * | | | arm64: dts: rockchip: fix Quartz64-A ddr regulator voltagePeter Geis2022-01-301-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The Quartz64 Model A uses a voltage divider to ensure ddr voltage is within specification from the default regulator configuration. Adjusting this voltage is detrimental, and currently causes the ddr voltage to be about 0.8v. Remove the min and max voltage setpoints for the ddr regulator. Fixes: b33a22a1e7c4 ("arm64: dts: rockchip: add basic dts for Pine64 Quartz64-A") Signed-off-by: Peter Geis <pgwipeout@gmail.com> Link: https://lore.kernel.org/r/20220128003809.3291407-2-pgwipeout@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * | | | arm64: dts: rockchip: Switch RK3399-Gru DP to SPDIF outputBrian Norris2022-01-231-5/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit b18c6c3c7768 ("ASoC: rockchip: cdn-dp sound output use spdif") switched the platform to SPDIF, but we didn't fix up the device tree. Drop the pinctrl settings, because the 'spdif_bus' pins are either: * unused (on kevin, bob), so the settings is ~harmless * used by a different function (on scarlet), which causes probe failures (!!) Fixes: b18c6c3c7768 ("ASoC: rockchip: cdn-dp sound output use spdif") Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Link: https://lore.kernel.org/r/20220114150129.v2.1.I46f64b00508d9dff34abe1c3e8d2defdab4ea1e5@changeid Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * | | | arm64: dts: rockchip: fix rk3399-puma-haikou USB OTG modeQuentin Schulz2022-01-232-0/+15
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The micro USB3.0 port available on the Haikou evaluation kit for Puma RK3399-Q7 SoM supports dual-role model (aka drd or OTG) but its support was broken until now because of missing logic around the ID pin. This adds proper support for USB OTG on Puma Haikou by "connecting" the GPIO used for USB ID to the USB3 controller device. Cc: Quentin Schulz <foss+kernel@0leil.net> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Link: https://lore.kernel.org/r/20220120125156.16217-1-quentin.schulz@theobroma-systems.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * | | | arm64: dts: rockchip: drop pclk_xpcs from gmac0 on rk3568Frank Wunderlich2022-01-231-4/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | pclk_xpcs is not supported by mainline driver and breaks dtbs_check following warnings occour, and many more rk3568-evb1-v10.dt.yaml: ethernet@fe2a0000: clocks: [[15, 386], [15, 389], [15, 389], [15, 184], [15, 180], [15, 181], [15, 389], [15, 185], [15, 172]] is too long From schema: Documentation/devicetree/bindings/net/snps,dwmac.yaml rk3568-evb1-v10.dt.yaml: ethernet@fe2a0000: clock-names: ['stmmaceth', 'mac_clk_rx', 'mac_clk_tx', 'clk_mac_refout', 'aclk_mac', 'pclk_mac', 'clk_mac_speed', 'ptp_ref', 'pclk_xpcs'] is too long From schema: Documentation/devicetree/bindings/net/snps,dwmac.yaml after removing it, the clock and other warnings are gone. pclk_xpcs on gmac is used to support QSGMII, but this requires a driver supporting it. Once xpcs support is introduced, the clock can be added to the documentation and both controllers. Fixes: b8d41e5053cd ("arm64: dts: rockchip: add gmac0 node to rk3568") Co-developed-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Acked-by: Michael Riesch <michael.riesch@wolfvision.net> Link: https://lore.kernel.org/r/20220123133510.135651-1-linux@fw-web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
| * | | | arm64: dts: rockchip: fix dma-controller node names on rk356xFrank Wunderlich2022-01-231-2/+2
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | DMA-Cotrollers defined in rk356x.dtsi do not match the pattern in bindings. arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dt.yaml: dmac@fe530000: $nodename:0: 'dmac@fe530000' does not match '^dma-controller(@.*)?$' From schema: Documentation/devicetree/bindings/dma/arm,pl330.yaml arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dt.yaml: dmac@fe550000: $nodename:0: 'dmac@fe550000' does not match '^dma-controller(@.*)?$' From schema: Documentation/devicetree/bindings/dma/arm,pl330.yaml This Patch fixes it. Signed-off-by: Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20220123133615.135789-1-linux@fw-web.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
* | | | Merge tag 'juno-fix-5.17' of ↵Arnd Bergmann2022-02-181-2/+1
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes Arm Juno fix for v5.17 Just a single fix to address coherency issue reported[1] by removing the GICv2m address from the DMA ranges as it loose coherency if mapped as cacheable at the SMMU due to the attribute combining rules. The GICv2m range is normally programmed for Device memory attributes. [1] https://lore.kernel.org/stable/0a1d437d-9ea0-de83-3c19-e07f560ad37c@arm.com/ * tag 'juno-fix-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux: arm64: dts: juno: Remove GICv2m dma-range Link: https://lore.kernel.org/r/20220214142615.2375269-1-sudeep.holla@arm.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | | arm64: dts: juno: Remove GICv2m dma-rangeRobin Murphy2022-01-261-2/+1
| |/ / / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Although it is painstakingly honest to describe all 3 PCI windows in "dma-ranges", it misses the the subtle distinction that the window for the GICv2m range is normally programmed for Device memory attributes rather than Normal Cacheable like the DRAM windows. Since MMU-401 only offers stage 2 translation, this means that when the PCI SMMU is enabled, accesses through that IPA range unexpectedly lose coherency if mapped as cacheable at the SMMU, due to the attribute combining rules. Since an extra 256KB is neither here nor there when we still have 10GB worth of usable address space, rather than attempting to describe and cope with this detail let's just remove the offending range. If the SMMU is not used then it makes no difference anyway. Link: https://lore.kernel.org/r/856c3f7192c6c3ce545ba67462f2ce9c86ed6b0c.1643046936.git.robin.murphy@arm.com Fixes: 4ac4d146cb63 ("arm64: dts: juno: Describe PCI dma-ranges") Reported-by: Anders Roxell <anders.roxell@linaro.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
* | | | Merge tag 'socfpga_dts_update_for_v5.18_part2' of ↵Arnd Bergmann2022-02-181-2/+2
|\ \ \ \ | |_|/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into arm/fixes SoCFPGA dts updates for v5.18, part 2 - Add the "intel,socfpga-agilex-hsotg" compatible for Agilex platform * tag 'socfpga_dts_update_for_v5.18_part2' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: arm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg" dt-bindings: usb: dwc2: add compatible "intel,socfpga-agilex-hsotg" Link: https://lore.kernel.org/r/20220211112556.98940-2-dinguyen@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | arm64: dts: agilex: use the compatible "intel,socfpga-agilex-hsotg"Dinh Nguyen2022-02-091-2/+2
| |/ / | | | | | | | | | | | | | | | | | | | | | The DWC2 USB controller on the Agilex platform does not support clock gating, so use the chip specific "intel,socfpga-agilex-hsotg" compatible. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
* | | Revert "arm64: dts: imx8mn-venice-gw7902: disable gpu"Arnd Bergmann2022-02-101-12/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | This reverts commit 0c566618e27f17b5807086dba8c222ca8ca3dc1e, this one was meant for v5.18, not as a bugfix, though the patch itself was correct. Reported-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* | | Merge tag 'ti-k3-dt-fixes-for-v5.17' of ↵Arnd Bergmann2022-02-082-24/+12
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into arm/fixes Device Tree fixes for TI K3 platform for v5.17 merge window * Update J721S2 platform to switch serial aliases to ttyS2. * tag 'ti-k3-dt-fixes-for-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: arm64: dts: ti: k3-j721s2-common-proc-board: Alias console uart to serial2 arm64: dts: ti: k3-j721s2: Move aliases to board dts Link: https://lore.kernel.org/r/20220204130716.fjlm4vvcbtzcwlwx@chalice Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | arm64: dts: ti: k3-j721s2-common-proc-board: Alias console uart to serial2Aswath Govindraju2022-01-241-3/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On J721s2 Linux console is on main_uart8 but to be consistent with other J7 family of devices, alias it to ttyS2 (serial2). This also eliminates need to have higher number of 8250 runtime UARTs. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20211223121650.26868-3-vigneshr@ti.com
| * | | arm64: dts: ti: k3-j721s2: Move aliases to board dtsAswath Govindraju2022-01-242-22/+10
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Aliases are board specific and should be in board dts files. So, move aliases to board dts and trim the list to interfaces that are actually enabled. Signed-off-by: Aswath Govindraju <a-govindraju@ti.com> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Reviewed-by: Kishon Vijay Abraham I <kishon@ti.com> Link: https://lore.kernel.org/r/20211223121650.26868-2-vigneshr@ti.com
* | | Merge tag 'imx-fixes-5.17' of ↵Arnd Bergmann2022-02-085-8/+24
|\ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes i.MX fixes for 5.17: - Fix sound card model for MBa8Mx board. - Drop i.MX8MQ LCDIF port node unit-address to fix DTC warning. - Add missing SD card detect line for imx6qdl-udoo board. - Remove MX23_PAD_SSP1_DETECT from imx23-evk hog group. It fixes the broken SD ard support on the board. - A couple of fixes from Martin Kepplinger to fix the MIPI_CSI port number on i.MX8MQ. - Re-enable ftm_alarm0 device on ls1028a-kontron-sl28 board which was disabled accidentally. - Fix 'assigned-clocks-parents' typo in i.MX7ULP watchdog device node. - Disable GPU device on imx8mn-venice-gw7902 board, as it uses MIMX8MN5CVTI SoC which does not integrate a GPU. * tag 'imx-fixes-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: arm64: dts: imx8mq: fix lcdif port node arm64: dts: imx8mq-librem5: fix mipi_csi1 port number to sensor arm64: dts: imx8mq: fix mipi_csi bidirectional port numbers ARM: dts: imx7ulp: Fix 'assigned-clocks-parents' typo arm64: dts: ls1028a: sl28: re-enable ftm_alarm0 arm64: dts: freescale: Fix sound card model for MBa8Mx ARM: dts: imx23-evk: Remove MX23_PAD_SSP1_DETECT from hog group ARM: dts: imx6qdl-udoo: Properly describe the SD card detect arm64: dts: imx8mn-venice-gw7902: disable gpu Link: https://lore.kernel.org/r/20220129073150.GZ4686@dragon Signed-off-by: Arnd Bergmann <arnd@arndb.de>
| * | | arm64: dts: imx8mq: fix lcdif port nodeAlexander Stein2022-01-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The port node does not have a unit-address, remove it. This fixes the warnings: lcd-controller@30320000: 'port' is a required property lcd-controller@30320000: 'port@0' does not match any of the regexes: 'pinctrl-[0-9]+' Fixes: commit d0081bd02a03 ("arm64: dts: imx8mq: Add NWL MIPI DSI controller") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| * | | arm64: dts: imx8mq-librem5: fix mipi_csi1 port number to sensorMartin Kepplinger2022-01-291-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the previous commit fixed a hardware description bug for imx8mq, we need to fix up all DT users like this. The mipi_csi port@0 is connected to the sensor, not port@1. Fixes: fed7603597fa ("arm64: dts: imx8mq-librem5: describe the selfie cam") Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| * | | arm64: dts: imx8mq: fix mipi_csi bidirectional port numbersMartin Kepplinger2022-01-291-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The port numbers for the imx8mq mipi csi controller are wrong and the mipi driver can't find any media devices as port@1 is connected to the CSI bridge, not port@0. And port@0 is connected to the source - the sensor. Fix this. Fixes: bcadd5f66c2a ("arm64: dts: imx8mq: add mipi csi phy and csi bridge descriptions") Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| * | | arm64: dts: ls1028a: sl28: re-enable ftm_alarm0Michael Walle2022-01-291-0/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Commit dd3d936a1b17 ("arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source") disables ftm_alarm0 in the SoC dtsi but doesn't enable it on the board which is still using it. Re-enable it on the sl28 board. Fixes: dd3d936a1b17 ("arm64: dts: ls1028a: add ftm_alarm1 node to be used as wakeup source") Reported-by: Guillaume Tucker <guillaume.tucker@collabora.com> Reported-by: "kernelci.org bot" <bot@kernelci.org> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| * | | arm64: dts: freescale: Fix sound card model for MBa8MxAlexander Stein2022-01-291-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The audio codec connection on MBa8Mx is identical to MBa7 (imx7) and MBa6 (imx6). Use the same sound card model as well. Fixes commit dfcd1b6f7620 ("arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM") Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
| * | | arm64: dts: imx8mn-venice-gw7902: disable gpuTim Harvey2022-01-261-0/+12
| |/ / | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 99aa29932271 ("arm64: dts: imx8mn: Enable GPU") imx8mn-venice-gw7902 will hang during kernel init because it uses a MIMX8MN5CVTI which does not have a GPU. Disable pgc_gpumix to work around this. We also disable the GPU devices that depend on the gpumix power domain and pgc_gpu to avoid them staying in a probe deferred state forever. Cc: Adam Ford <aford173@gmail.com> Cc: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Tim Harvey <tharvey@gateworks.com> Fixes: 99aa29932271 ("arm64: dts: imx8mn: Enable GPU") Reviewed-by: Adam Ford <aford173@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* | | arm64: dts: meson-sm1-odroid: fix boot loop after rebootLutz Koschorreck2022-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since the correct gpio pin is used for enabling tf-io regulator the system did not boot correctly after calling reboot. [ 36.862443] reboot: Restarting system bl31 reboot reason: 0xd bl31 reboot reason: 0x0 system cmd 1. SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:0;READ:0;0.0;CHK:0; bl2_stage_init 0x01 bl2_stage_init 0x81 hw id: SM1:BL:511f6b:81ca2f;FEAT:A0F83180:20282000;POC:B;RCY:0;SPINOR:0;CHK:1F;EMMC:800;NAND:81;SD?:0;SD:400;USB:8;LOOP:1;... Setting the gpio to open drain solves the issue. Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator") Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: reduced serial log & removed invalid character in commit message] Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220128193150.GA1304381@odroid-VirtualBox
* | | arm64: dts: meson-g12: drop BL32 region from SEI510/SEI610Christian Hewitt2022-02-042-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BL32/TEE reserved-memory region is now inherited from the common family dtsi (meson-g12-common) so we can drop it from board files. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com
* | | arm64: dts: meson-g12: add ATF BL32 reserved-memory regionChristian Hewitt2022-02-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-3-christianshewitt@gmail.com
* | | arm64: dts: meson-gx: add ATF BL32 reserved-memory regionChristian Hewitt2022-02-041-0/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot. Suggested-by: Mateusz Krzak <kszaquitto@gmail.com> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220126044954.19069-2-christianshewitt@gmail.com
* | | arm64: dts: meson-sm1-bananapi-m5: fix wrong GPIO domain for GPIOE_2Dongjin Kim2022-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | GPIOE_2 is in AO domain and "<&gpio GPIOE_2 ...>" changes the state of TF_PWR_EN of 'FC8731' on BPI-M5 Fixes: 976e920183e4 ("arm64: dts: meson-sm1: add Banana PI BPI-M5 board dts") Signed-off-by: Dongjin Kim <tobetter@gmail.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/20220127151656.GA2419733@paju
* | | arm64: dts: meson-sm1-odroid: use correct enable-gpio pin for tf-io regulatorLutz Koschorreck2022-02-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The interrupt pin of the external ethernet phy is used, instead of the enable-gpio pin of the tf-io regulator. The GPIOE_2 pin is located in the gpio_ao bank. This causes phy interrupt problems at system startup. [ 76.645190] irq 36: nobody cared (try booting with the "irqpoll" option) [ 76.649617] CPU: 0 PID: 1416 Comm: irq/36-0.0:00 Not tainted 5.16.0 #2 [ 76.649629] Hardware name: Hardkernel ODROID-HC4 (DT) [ 76.649635] Call trace: [ 76.649638] dump_backtrace+0x0/0x1c8 [ 76.649658] show_stack+0x14/0x60 [ 76.649667] dump_stack_lvl+0x64/0x7c [ 76.649676] dump_stack+0x14/0x2c [ 76.649683] __report_bad_irq+0x38/0xe8 [ 76.649695] note_interrupt+0x220/0x3a0 [ 76.649704] handle_irq_event_percpu+0x58/0x88 [ 76.649713] handle_irq_event+0x44/0xd8 [ 76.649721] handle_fasteoi_irq+0xa8/0x130 [ 76.649730] generic_handle_domain_irq+0x38/0x58 [ 76.649738] gic_handle_irq+0x9c/0xb8 [ 76.649747] call_on_irq_stack+0x28/0x38 [ 76.649755] do_interrupt_handler+0x7c/0x80 [ 76.649763] el1_interrupt+0x34/0x80 [ 76.649772] el1h_64_irq_handler+0x14/0x20 [ 76.649781] el1h_64_irq+0x74/0x78 [ 76.649788] irq_finalize_oneshot.part.56+0x68/0xf8 [ 76.649796] irq_thread_fn+0x5c/0x98 [ 76.649804] irq_thread+0x13c/0x260 [ 76.649812] kthread+0x144/0x178 [ 76.649822] ret_from_fork+0x10/0x20 [ 76.649830] handlers: [ 76.653170] [<0000000025a6cd31>] irq_default_primary_handler threaded [<0000000093580eb7>] phy_interrupt [ 76.661256] Disabling IRQ #36 Fixes: 1f80a5cf74a6 ("arm64: dts: meson-sm1-odroid: add missing enable gpio and supply for tf_io regulator") Signed-off-by: Lutz Koschorreck <theleks@ko-hh.de> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> [narmstrong: removed spurious invalid & blank lines from commit message] Link: https://lore.kernel.org/r/20220127130537.GA187347@odroid-VirtualBox
* | | arm64: dts: meson-g12b-odroid-n2: fix typo 'dio2133'Dongjin Kim2022-02-041-2/+2
|/ / | | | | | | | | | | | | | | | | | | | | Typo in audio amplifier node, dioo2133 -> dio2133 Signed-off-by: Dongjin Kim <tobetter@gmail.com> Fixes: ef599f5f3e10 ("arm64: dts: meson: convert ODROID-N2 to dtsi") Fixes: 67d141c1f8e6 ("arm64: dts: meson: odroid-n2: add jack audio output support") Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Link: https://lore.kernel.org/r/YfKQJejh0bfGYvof@anyang
generated by cgit (git 2.34.1) at 2025-02-25 04:04:31 +0000