aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/iio/adc/at91-sama5d2_adc.c
Commit message (Collapse)AuthorAgeFilesLines
* iio: adc: at91-sama5d2_adc: get rid of 5 degrees Celsius adjustmentClaudiu Beznea2022-10-241-4/+2
| | | | | | | | | | On SAMA7G5 final chip version there is no need for 5 degrees Celsius adjustment when computing junction temperature, thus, remove it. Fixes: 5ab38b81895c ("iio: adc: at91-sama5d2_adc: add support for temperature sensor") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20221020102705.3639204-1-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: at91-sama5d2_adc: Fix unsafe buffer attributesMatti Vaittinen2022-10-171-5/+18
| | | | | | | | | | | | | | | | | | | | | The iio_triggered_buffer_setup_ext() was changed by commit 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") to silently expect that all attributes given in buffer_attrs array are device-attributes. This expectation was not forced by the API - and some drivers did register attributes created by IIO_CONST_ATTR(). The added attribute "wrapping" does not copy the pointer to stored string constant and when the sysfs file is read the kernel will access to invalid location. Change the IIO_CONST_ATTRs from the driver to IIO_DEVICE_ATTR in order to prevent the invalid memory access. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 15097c7a1adc ("iio: buffer: wrap all buffer attributes into iio_dev_attr") Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/be69775aa302159f088b8b91894e6ec449bca65b.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: convert to device propertiesNuno Sá2022-08-151-15/+15
| | | | | | | | | | | | | Make the conversion to firmware agnostic device properties. As part of the conversion the IIO inkern interface 'of_xlate()' is also converted to 'fwnode_xlate()'. The goal is to completely drop 'of_xlate' and hence OF dependencies from IIO. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220715122903.332535-10-nuno.sa@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: add runtime pm supportClaudiu Beznea2022-08-151-42/+166
| | | | | | | | | | | | | | Add runtime PM support by disabling/enabling ADC's peripheral clock. On simple conversion the ADC's clock is kept enabled just while the conversion is in progress. This includes also temperature conversion. For triggered buffers and touch conversions the ADC clock is kept enabled while the triggered buffers or touch are enabled. Along with it removed the __maybe_unused on suspend() and resume() ops as the dev_pm_ops object members are now filled with SYSTEM_SLEEP_PM_OPS(). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-20-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: add empty line after functionsClaudiu Beznea2022-08-151-0/+1
| | | | | | | | Add empty line after function. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-19-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: add support for temperature sensorClaudiu Beznea2022-08-151-7/+249
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The ADC on SAMA7G5 has a dedicated channel (channel 31) for measuring in-SoC temperature. 2 inputs are multiplexed on channel 31, VTEMP and VBG as follows: ` | \ +-----+ VBG --->| | ch31 | | Vtemp --->| |----->| ADC | | / | | | / +-----+ . where: - VTEMP is proportional to the absolute temperature voltage - VBG is a quasi-temperature independent voltage Both VBG and VTEMP are needed to determine the correct in-SoC temperature. At a moment of time only one of these could be measured, the selection being done with bit SRCLCH bit of ACR register. The formula to calculate the temperature is as follows: P1 + (Vref * (VTEMP - P6 - P4 * VBG)) / (VBG * VTEMP_DT) where: - P1, P4, P6 are calibration data retrieved from OTP memory - Vref is the reference voltage for ADC - VTEMP_DT is the voltage sensitivity to temperature and is constant - VTEMP, VBG are the measured values from channel 31 For better resolution before reading the temperature certain settings for oversampling ratio, sample frequency, EMR.TRACKX, MR.TRACKTIM are applied. The initial settings are reapplied at the end of temperature reading. Current support is not integrated with trigger buffers channel 31 not being enabled/disabled in functions at91_adc_buffer_prepare(), at91_adc_buffer_postdisable() thus the conversion for channel 31 is not done in case trigger buffers are enabled. In case of trigger buffers are enabled and temperature requests are received in the driver though at91_adc_read_temp() the at91_adc_read_temp() will return with an error code. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-18-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: lock around at91_adc_read_info_raw()Claudiu Beznea2022-08-151-20/+19
| | | | | | | | | | | | Remove iio_device_{claim, release}_direct_mode() and lock/unlock to &st->lock from at91_adc_read_info_raw(). Instead add a wrapper around at91_adc_read_info_raw() and do there the lock/unlock. This will allow using the at91_adc_read_info_raw() in patch that add support for temperature sensor. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-16-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: add startup and tracktim as parameter for ↵Claudiu Beznea2022-08-151-7/+11
| | | | | | | | | | | | | at91_adc_setup_samp_freq() Add startup and tracktim as parameter for at91_adc_setup_samp_freq() function. In case of temperature sensor being enabled these parameters will be configured on temperature read request to improve the accuracy of the read temperature. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-15-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: update trackx on emrClaudiu Beznea2022-08-151-4/+10
| | | | | | | | | Add support for updating trackx bits of EMR register. Having different values of EMR.TRACKX when measuring temperature give a better accuracy. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-14-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: move oversampling storage in its functionClaudiu Beznea2022-08-151-2/+2
| | | | | | | | | Move the storage of oversampling_ratio in at91_adc_config_emr(). This prepares for the next commits. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-13-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: add 64 and 256 oversampling ratioClaudiu Beznea2022-08-151-5/+26
| | | | | | | | | Add 64 and 256 oversampling ratio support. It is necessary for temperature sensor. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-12-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: adjust osr based on specific platform dataClaudiu Beznea2022-08-151-13/+22
| | | | | | | | | | | | | | | ADC captures data on 12 bits (if oversampling is not enabled). When using oversampling captured data could go up to 14 bits for SAMA5D2 or up to 16 bits for SAMA7G5 (depending on oversampling settings). All the channels that are subject of oversampling are registered as 14 or 16 real bits. Depending on the oversampling settings the ADC converted value need to be shifted up to 14 or 16 to cope with realbits value registered to IIO subsystem. Commit adds platform specific information to know if we run on a system with up to 14 or 16 bits ADC converted data. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-11-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: add .read_avail() chan_info opsClaudiu Beznea2022-08-151-15/+35
| | | | | | | | | | Add .read_avail() to chan_info ops which will retrieve the available oversampling ratio. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-10-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: drop AT91_OSR_XSAMPLES definesClaudiu Beznea2022-08-151-14/+9
| | | | | | | | | | Drop AT91_OSR_1SAMPLES, AT91_OSR_4SAMPLES, AT91_OSR_16SAMPLES defines and insted use their values inline. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-9-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: move the check of oversampling in its functionClaudiu Beznea2022-08-151-8/+10
| | | | | | | | | | | Oversampling values are checked anyway in at91_adc_emr_config(). Remove the checking of these from at91_adc_write_raw() and return -EINVAL instead in at91_adc_emr_config(). Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-8-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: handle different EMR.OSR for different hw versionsClaudiu Beznea2022-08-151-13/+18
| | | | | | | | | | SAMA7G5 introduces 64 and 256 oversampling rates. Due to this EMR.OSR is 3 bits long. Change the code to reflect this. Commit prepares the code for the addition of 64 and 256 oversampling rates. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-7-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: exit from write_raw() when buffers are enabledClaudiu Beznea2022-08-151-0/+10
| | | | | | | | | | | When buffers are enabled conversion may start asynchronously thus allowing changes on actual hardware could lead to bad behavior. Thus do not allow changing oversampling ratio and sample frequency when if iio_device_claim_direct_mode() returns with error. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-6-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: disable/prepare buffer on suspend/resumeClaudiu Beznea2022-08-151-7/+7
| | | | | | | | | | | | | | | In case triggered buffers are enabled while system is suspended they will not work anymore after resume. For this call at91_adc_buffer_postdisable() on suspend and at91_adc_buffer_prepare() on resume. On tests it has been seen that at91_adc_buffer_postdisable() call is not necessary but it has been kept because it also does the book keeping for DMA. On resume path there is no need to call at91_adc_configure_touch() as it is embedded in at91_adc_buffer_prepare(). Fixes: 073c662017f2f ("iio: adc: at91-sama5d2_adc: add support for DMA") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-5-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: lock around oversampling and sample freqClaudiu Beznea2022-08-151-4/+8
| | | | | | | | | | | | | | .read_raw()/.write_raw() could be called asynchronously from user space or other in kernel drivers. Without locking on st->lock these could be called asynchronously while there is a conversion in progress. Read will be harmless but changing registers while conversion is in progress may lead to inconsistent results. Thus, to avoid this lock st->lock. Fixes: 27e177190891 ("iio:adc:at91_adc8xx: introduce new atmel adc driver") Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-4-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: check return status for pressure and touchClaudiu Beznea2022-08-151-2/+6
| | | | | | | | | | Check return status of at91_adc_read_position() and at91_adc_read_pressure() in at91_adc_read_info_raw(). Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-3-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: fix AT91_SAMA5D2_MR_TRACKTIM_MAXClaudiu Beznea2022-08-151-1/+1
| | | | | | | | | | | All ADC HW versions handled by this driver (SAMA5D2, SAM9X60, SAMA7G5) have MR.TRACKTIM on 4 bits. Fix AT91_SAMA5D2_MR_TRACKTIM_MAX to reflect this. Fixes: 27e177190891 ("iio:adc:at91_adc8xx: introduce new atmel adc driver") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20220803102855.2191070-2-claudiu.beznea@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sam5d2: Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()Jonathan Cameron2022-07-181-4/+5
| | | | | | | | | | | | | | Using these newer macros allows the compiler to remove the unused structure and functions when !CONFIG_PM_SLEEP + removes the need to mark pm functions __maybe_unused. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Reviewed-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220621202719.13644-4-jic23@kernel.org
* iio: at91-sama5d2: Limit requested watermark value to hwfifo sizePaul Cercueil2022-06-151-1/+1
| | | | | | | | | | | | | | | Instead of returning an error if the watermark value is too high, which the core will silently ignore anyway, limit the value to the hardware FIFO size; a lower-than-requested value is still better than using the default, which is usually 1. Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20220117102512.31725-2-paul@crapouillou.net Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: core: Hide read accesses to iio_dev->currentmodeMiquel Raynal2022-04-101-2/+2
| | | | | | | | | | | | | | | | | In order to later move this variable within the opaque structure, let's create a helper for accessing it in read-only mode. This helper will be exposed to device drivers and kept accessible for the few that could need it. The write access to this variable however should be fully reserved to the core so in a second step we will hide this variable into the opaque structure. Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20220207143840.707510-11-miquel.raynal@bootlin.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* Merge tag 'iio-for-5.17a' of ↵Greg Kroah-Hartman2021-12-221-20/+18
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into char-misc-next Jonathan writes: 1st set of IIO new device support, features and cleanup for 5.17 Includes some fixes that were either late breaking, low priority or complex enough to not be good to rush in late in the cycle. Tree rebased today to fix up some trivial issues + pull in a fix that was previously on the fixes-togreg branch. Vast majority have been in linux-next for some time now. New device support * adi,ad7293 - New driver and bindings for this Power Amplifier drain current controller. A complex device with various related monitoring functions. * adi,ad75513R - New driver and bindings for this combined ADC and DAC device. - A few follow up fixes. * adi,admv8818 - New driver (and type) for this 2-18GHz filter device. Includes bindings and ABI documentation to allow clk_notifier based auto adjustment of the filters in appropriate applications. * liteon,ltr501 - Support for the ltr303. ID and chip specific info table. * xilinx,ams - New generic firmware function fwnode_iomap() as used in this driver. - New driver and bindings for this ADC and on-chip sensors as found in various Xilinx devices. Core * Introduced IIO_VAL_INT_64 which uses val and val2 in IIO callbacks to form a 64 bit integer when higher precision needed. * Allow IIO_ENUM_AVAILABLE to be used with different shared values. * Fix a long term issue with scheduling whilst atomic when iio_trig_poll() is called but no trigger consumers are actually enabled and hence the trigger may be reenabled from the interrupt handler. Seen in the wild on the tsc2046. * Mark iio_device_type const. * buffer: Use a separate index variable to simplify code. * buffer-dma: Clear out unused struct iio_buffer_block * buffer-dmaengine: Switch to cheaper round_down() as power of 2 values. Tests/tools * format_value - Check against NULL returns from allocations in tests. - Add IIO_VAL_INT_64 test case. * event_monitor - Flush the output after event to given more consistent latency when tool output piped to other programs. Driver Features * axp20x - Add support for NTC thermistor channel and document TS pin binding. * arm,scmi - Add reading of raw channel values (using IIO_VAL_INT_64) * liteon,ltr501 - Add proximity-near-level support and dt-binding. Tree wide cleanup * Remove no-op trigger ops from multiple drivers. * Stop using dev_get_drvdata() on the iio_dev->dev in various drivers and then stop assigning it to allow this to be used for other purposes. We can always get to the indio_dev using dev_to_iio_dev() which is a container_of() based approach. Also cleanup up some related unnecessary convoluted cases. - atmel,at91-sam5d2 - nxp,imx7d - meas,ms5611 - st,st_sensors * Where available (or easy to introduce) use the scan_type.* values in place of a second copy for read_raw and similar paths. - adi,ad7266 - bosch,bma220 - fsl,mac3110 - fsl,mma7455 - fsl,mpl3115 - kionix,kcjk-1013 - sensortek,stk8ba50 - sensortek,stk8312 - ti,adc12138 - ti,ads1015 - vti,sca3000 - xilinx,xadc-core * Switch drives over to generic firmware properties including appropriate header changes to avoid including of.h - Various DACs had false CONFIG_OF dependencies. - dpot-dac - envelope-detector - adi,ad5755 - adi,ad5758 - capella,cm3605 - maxim,max9611 - microchip,mcp41010 - microchip,mcp3911 - ti,adc12138 * Trivial clang warning fixes for W=1 warnings. Driver specific cleanup and minor fixes * adi,ad7606 - Comment fixes. * ams,ad3935 - Drop pointless cast to the same type. * atmel,at91-sama5d2 - Fix wrong cast of iio_dev->dev to platform_device that happened to be harmless. * fsl,mma7660 - Stop i2c remove() function returning an error code. Part of a rework to eventually stop returning anything from these. * fsl,mma8452 - Use correct type for local irqreturn_t. * nxp,imx8mq - Maintainer email address update. * nxp,lpc18xx_adc - Ensure clk_prepare_enable() called before clk_get_rate(). - Switch of.h for mod_devicetable.h to reflect no of specific functions, just the id table. * renesas,rzg2l - Drop a dev_err() that just duplicates error printed in platform_get_irq() * sgx,vz89x - Drop pointless cast. * st,lsm6dsx - Make it possible to disable the sensorhub from DT to avoid a corner case where the address of a slave device many be accidentally modified. * st,stm32-adc - Stop leaking an of_node in an error path. * st,stmp2 - Avoid wrong sized type for bit field which could result in over-reading (harmless). Precursor to enabling -Warray-bounds. * ti,adc081c - Put back some ACPI support for non standards compliant ADC081C ID because it is known to be in the wild on some Aaeon boards. * ti,ads8688 - Cleanup redundant local ret variable assignment. * ti,ina2xx-adc - Use helper macro kthread_run() to replace some boilerplate. - Avoid double reference counting. - Drop pointless cast. * xilinx,xadc - Make the IRQ optional as not always wired to the host system. * tag 'iio-for-5.17a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (103 commits) iio: adc: ti-adc081c: Partial revert of removal of ACPI IDs iio:addac:ad74413r: Fix uninitialized ret in a path that won't be hit. MAINTAINERS: Add maintainer for xilinx-ams dt-bindings: iio: adc: Add Xilinx AMS binding documentation iio: adc: Add Xilinx AMS driver device property: Add fwnode_iomap() iio:accel:kxcjk-1013: Mark struct __maybe_unused to avoid warning. iio:accel:bmc150: Mark structure __maybe_unused as only needed with for pm ops. iio:dummy: Drop set but unused variable len. iio:magn:ak8975: Suppress clang W=1 warning about pointer to enum conversion. iio:imu:inv_mpu6050: Suppress clang W=1 warning about pointer to enum conversion. iio:imu:inv_icm42600: Suppress clang W=1 warning about pointer to enum conversion. iio:dac:mcp4725: Suppress clang W=1 warning about pointer to enum conversion. iio:amplifiers:hmc425a: Suppress clang W=1 warning about pointer to enum conversion. iio:adc:ti-ads1015: Suppress clang W=1 warning about pointer to enum conversion. iio:adc:rcar: Suppress clang W=1 warning about pointer to enum conversion. iio:adc:ina2xx-adc: Suppress clang W=1 warning about pointer to enum conversion. iio:accel:bma180: Suppress clang W=1 warning about pointer to enum conversion. drivers:iio:dac: Add AD3552R driver support dt-bindings: iio: dac: Add adi,ad3552r.yaml ...
| * iio: at91-sama5d2: Use dev_to_iio_dev() in sysfs callbacksLars-Peter Clausen2021-11-171-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Using `dev_get_drvdata()` in IIO sysfs callbacks to get a pointer to the IIO device is a relic from the very early days of IIO. The IIO core as well as most other drivers have switched over to using `dev_to_iio_dev()` instead. This driver is one of the last few drivers remaining that uses the outdated idiom, update it. This will allow to eventually update the IIO core to no longer set the drvdata for the IIO device and free it up for driver usage. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Link: https://lore.kernel.org/r/20211019082929.30503-2-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
| * iio: at91-sama5d2: Fix incorrect cast to platform_deviceLars-Peter Clausen2021-11-171-18/+16
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The at91-sama5d2 driver calls `to_platform_device()` on a struct device that is part of a IIO device. This is incorrect since `to_platform_device()` must only be called on a struct device that is part of a platform device. The code still works by accident because non of the struct platform_device specific fields are accessed. Refactor the code a bit so that it behaves identically, but does not use the incorrect cast. This avoids accidentally adding undefined behavior in the future by assuming the `struct platform_device` is actually valid. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20211019082929.30503-1-lars@metafoo.de Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* | iio: at91-sama5d2: Fix incorrect sign extensionGwendal Grignou2021-11-211-1/+2
|/ | | | | | | | | | | | | | | Use scan_type when processing raw data which also fixes that the sign extension was from the wrong bit. Use channel definition as root of trust and replace constant when reading elements directly using the raw sysfs attributes. Fixes: 6794e23fa3fe ("iio: adc: at91-sama5d2_adc: add support for oversampling resolution") Signed-off-by: Gwendal Grignou <gwendal@chromium.org> Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com> Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211104082413.3681212-9-gwendal@chromium.org Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: triggered-buffer: extend support to configure output buffersAlexandru Ardelean2021-10-191-2/+2
| | | | | | | | | | | | | | | | | Now that output (kfifo) buffers are supported, we need to extend the {devm_}iio_triggered_buffer_setup_ext() parameter list to take a direction parameter. This allows us to attach an output triggered buffer to a DAC device. Unfortunately it's a bit difficult to add another macro to avoid changing 5 drivers where {devm_}iio_triggered_buffer_setup_ext() is used. Well, it's doable, but may not be worth the trouble vs just updating all these 5 drivers. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Mihail Chindris <mihail.chindris@analog.com> Link: https://lore.kernel.org/r/20211007080035.2531-4-mihail.chindris@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: update copyright and authors informationEugen Hristev2021-09-141-1/+4
| | | | | | | | | Update copyright and authors information (corrected e-mail address), and add myself as one of the authors. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-9-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: add support for sama7g5 deviceEugen Hristev2021-09-141-0/+78
| | | | | | | | | | | Add support to sama7g5 ADC which is similar with sama5d2/sam9x60 device. Differences are highlighted by compatible. Main differences include 16 channels instead of 12 and missing resistive touchscreen. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-8-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: add helper for COR registerEugen Hristev2021-09-141-20/+20
| | | | | | | | | | | Add helper for the COR register. This helper allows to modify the COR register, removes duplicate code and improves readability. The COR offset is now part of the register layout. This will allow different platform with a different offset to use the same helper. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-7-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: add support for separate end of conversion registersEugen Hristev2021-09-141-7/+59
| | | | | | | | | | | Some platforms have separated the end-of-conversion information from the usual ISR/IMR/IER/IDR registers, into EOC_ISR/EOC_IMR/EOC_IER/EOC_IDR. To cope with both variants, helpers are being added, that will make code more clear and more easy to read. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-6-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: convert to platform specific data structuresEugen Hristev2021-09-141-164/+253
| | | | | | | | | | | | | | | | | Convert the driver to platform specific structures. This means: - create a register layout struct that will hold offsets for registers - create a platform struct that will hold platform information (number of channels, indexes for different channels and pointer to layout struct) - convert specific macros that are platform dependent into platform variables This step is in fact a no-op, but allows the driver to be more flexible and for future enhancement including adding new platforms that are partly compatible with the current driver and differ slightly in register layout or capabilities for example. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-5-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: remove unused definitionEugen Hristev2021-09-141-2/+0
| | | | | | | | Remove unused register definition Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-4-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: initialize hardware after clock is startedEugen Hristev2021-09-141-2/+2
| | | | | | | | | | The hw_init hardware init call must happen after the clock is prepared and enabled. Otherwise, writing to the registers might lead to a block or external abort. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20210901123013.329792-3-eugen.hristev@microchip.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2: Fix buffer alignment in ↵Jonathan Cameron2021-06-141-1/+2
| | | | | | | | | | | | | | | iio_push_to_buffers_with_timestamp() To make code more readable, use a structure to express the channel layout and ensure the timestamp is 8 byte aligned. Found during an audit of all calls of this function. Fixes: 5e1a1da0f8c9 ("iio: adc: at91-sama5d2_adc: add hw trigger and buffer support") Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Nuno Sá <nuno.sa@analog.com> Link: https://lore.kernel.org/r/20210613152301.571002-2-jic23@kernel.org
* iio: core: move @id from struct iio_dev to struct iio_dev_opaqueJonathan Cameron2021-05-171-1/+1
| | | | | | | | | | | | | | | Continuing from Alexandru Ardelean's introduction of the split between driver modifiable fields and those that should only be set by the core. This could have been done in two steps to make the actual move after introducing iio_device_id() but there seemed limited point to that given how mechanical the majority of the patch is. Includes fixup from Alex for missing mxs-lradc-adc conversion. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Alexandru Ardelean <ardeleanalex@gmail.com> Link: https://lore.kernel.org/r/20210426174911.397061-2-jic23@kernel.org
* iio:trigger: rename try_reenable() to reenable() plus return voidJonathan Cameron2020-12-031-5/+3
| | | | | | | | | | | | | | | | | | | | As we no longer support a try again if we cannot reenable the trigger rename the function to reflect this. Also we don't do anything with the value returned so stop it returning anything. For the few drivers that didn't already print an error message in this patch, add such a print. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: Christian Oder <me@myself5.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Nishant Malpani <nish.malpani25@gmail.com> Cc: Daniel Baluta <daniel.baluta@oss.nxp.com> Link: https://lore.kernel.org/r/20200920132548.196452-3-jic23@kernel.org
* iio: adc: at91-sama5d2_adc: use devm_iio_triggered_buffer_setup_ext()Alexandru Ardelean2020-11-211-4/+8
| | | | | | | | | | | This change switches to the new devm_iio_triggered_buffer_setup_ext() function and removes the iio_buffer_set_attrs() call, for assigning the HW FIFO attributes to the buffer. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200929125949.69934-7-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: merge buffer & trigger init into a functionAlexandru Ardelean2020-11-211-42/+36
| | | | | | | | | | | | | | | | | This change is mostly cosmetic, but it's also a pre-cursor to the the change for 'iio_buffer_set_attrs()', where the helper gets updated to better support multiple IIO buffers for 1 IIO device. The only functional change is that the error message for the trigger alloc failure is bound to the parent device vs the IIO device object. Also, the new at91_adc_buffer_and_trigger_init() function was moved after the definition of the 'at91_adc_fifo_attributes'. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20200929125949.69934-3-alexandru.ardelean@analog.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: remove unneeded semicolonTom Rix2020-10-311-1/+1
| | | | | | | | A semicolon is not needed after a switch statement. Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20201027200853.1596699-1-trix@redhat.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: fix DMA conversion crashEugen Hristev2020-09-291-4/+12
| | | | | | | | | | | | | | After the move of the postenable code to preenable, the DMA start was done before the DMA init, which is not correct. The DMA is initialized in set_watermark. Because of this, we need to call the DMA start functions in set_watermark, after the DMA init, instead of preenable hook, when the DMA is not properly setup yet. Fixes: f3c034f61775 ("iio: at91-sama5d2_adc: adjust iio_triggered_buffer_{predisable,postenable} positions") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Link: https://lore.kernel.org/r/20200923121748.49384-1-eugen.hristev@microchip.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: Use devm_platform_get_and_ioremap_resource()Wang ShaoBo2020-09-291-7/+3
| | | | | | | | | Make use of devm_platform_get_and_ioremap_resource() provided by driver core platform instead of duplicated analogue. Signed-off-by: Wang ShaoBo <bobo.shaobowang@huawei.com> Link: https://lore.kernel.org/r/20200918082837.32610-1-bobo.shaobowang@huawei.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: adc: at91-sama5d2_adc: Struct kerneldoc titles need to start with 'struct 'Lee Jones2020-07-201-2/+2
| | | | | | | | | | | | | | Fixes the following W=1 kernel build warning(s): drivers/iio/adc/at91-sama5d2_adc.c:360: warning: cannot understand function prototype: 'struct at91_adc_dma ' drivers/iio/adc/at91-sama5d2_adc.c:379: warning: cannot understand function prototype: 'struct at91_adc_touch ' Cc: Ludovic Desroches <ludovic.desroches@microchip.com> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Nicolas Ferre <nicolas.ferre@microchip.com> Cc: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: at91-sama5d2_adc: remove usage of iio_priv_to_dev() helperAlexandru Ardelean2020-07-071-13/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | We may want to get rid of the iio_priv_to_dev() helper. The reason is that we will hide some of the members of the iio_dev structure (to prevent drivers from accessing them directly), and that will also mean hiding the implementation of the iio_priv_to_dev() helper inside the IIO core. Hiding the implementation of iio_priv_to_dev() implies that some fast-paths may not be fast anymore, so a general idea is to try to get rid of the iio_priv_to_dev() altogether. The iio_priv() helper won't be affected by the rework, as the iio_dev struct will keep a reference to the private information. For this driver, not using iio_priv_to_dev(), means reworking some paths to pass the iio device and using iio_priv() to access the private information, and also keeping a reference to the iio device for some quirky paths. One [quirky] path is the at91_adc_workq_handler() which requires the IIO device & the state struct to push to buffers. Since this requires the back-ref to the IIO device, the at91_adc_touch_pos() also uses it. This simplifies the patch a bit. The information required in this function is mostly for debugging purposes. Replacing it with a reference to the IIO device would have been a slightly bigger change, which may not be worth it (for just the debugging purpose and given that we need the back-ref to the IIO device anyway). Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: Move attach/detach of the poll func to the coreLars-Peter Clausen2020-06-201-18/+0
| | | | | | | | | | | | | | | | | | | | | | | All devices using a triggered buffer need to attach and detach the trigger to the device in order to properly work. Instead of doing this in each and every driver by hand move this into the core. At this point in time, all drivers should have been resolved to attach/detach the poll-function in the same order. This patch removes all explicit calls of iio_triggered_buffer_postenable() & iio_triggered_buffer_predisable() in all drivers, since the core handles now the pollfunc attach/detach. The more peculiar change is for the 'at91-sama5d2_adc' driver, since it's not immediately obvious that removing the hooks doesn't break anything. Eugen was able to test on at91-sama5d2-adc driver, sama5d2-xplained board. All seems to be fine. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Tested-by: Eugen Hristev <eugen.hristev@microchip.com> #for at91-sama5d2-adc Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: remove explicit IIO device parent assignmentAlexandru Ardelean2020-06-141-1/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch applies the semantic patch: @@ expression I, P, SP; @@ I = devm_iio_device_alloc(P, SP); ... - I->dev.parent = P; It updates 302 files and does 307 deletions. This semantic patch also removes some comments like '/* Establish that the iio_dev is a child of the i2c device */' But this is is only done in case where the block is left empty. The patch does not seem to cover all cases. It looks like in some cases a different variable is used in some cases to assign the parent, but it points to the same reference. In other cases, the block covered by ... may be just too big to be covered by the semantic patch. However, this looks pretty good as well, as it does cover a big bulk of the drivers that should remove the parent assignment. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: at91-sama5d2_adc: adjust iio_triggered_buffer_{predisable,postenable} ↵Alexandru Ardelean2020-04-251-9/+21
| | | | | | | | | | | | | | | | | | | | | | | | positions The iio_triggered_buffer_{predisable,postenable} functions attach/detach poll functions. In most cases the iio_triggered_buffer_postenable() should be called first to attach the poll function, and then the driver can init the data to be triggered. In this case it's the other way around: the DMA code should be initialized before the attaching the poll function and the reverse should be done when un-initializing. To make things easier when removing the iio_triggered_buffer_postenable() & iio_triggered_buffer_predisable() functions from the IIO core API, the DMA code has been moved into preenable() for init, and postdisable() for uninit. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com> Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
* iio: at91-sama5d2_adc: split at91_adc_current_chan_is_touch() helperAlexandru Ardelean2020-04-251-16/+15
| | | | | | | | | | | | This change moves the logic to check if the current channel is the touchscreen channel to a separate helper. This reduces some code duplication, but the main intent is to re-use this in the next patches. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Eugen Hristev <eugen.hristev@microchip.com> Reviewed-by: Ludovic Desroches <ludovic.desroches@microchip.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
generated by cgit (git 2.34.1) at 2025-03-01 07:58:19 +0000