aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/media/i2c/Makefile
Commit message (Collapse)AuthorAgeFilesLines
* media: On Semi AR0521 sensor driverKrzysztof Hałasa2022-07-081-0/+1
| | | | | | | | | | The driver has been extensively tested in an i.MX6-based system. AR0521 is a 5.7 mm x 4.3 mm, 5 MPix RGGB MIPI/HiSPi BSI CMOS sensor from On Semiconductor. Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: Makefiles: sort entries where it fitsMauro Carvalho Chehab2022-03-141-92/+92
| | | | | | | | | | | | | Alphabetically sort entries at the Makefiles per group, in ASCII order, e. g., using the output of: $ LC_ALL=C sort Makefile |grep obj-y ... $ LC_ALL=C sort Makefile |grep obj.*CONFIG ... Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: Makefiles: remove extra spacesMauro Carvalho Chehab2022-03-121-46/+46
| | | | | | | | | | | It is hard to keep all those options aligned as newer config changes get added, and we really don't want to have patches adding new options also touching already existing entries. So, drop the extra spaces. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: i2c: isl7998x: Add driver for Intersil ISL7998xMarek Vasut2022-03-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | Add driver for the Intersil ISL7998x Analog to MIPI CSI-2/BT656 decoder. This chip supports 1/2/4 analog video inputs and converts them into 1/2/4 VCs in MIPI CSI2 stream. This driver currently supports ISL79987 and both 720x480 and 720x576 resolutions, however as per specification, all inputs must use the same resolution and standard. The only supported pixel format is now YUYV/YUV422. The chip should support RGB565 on the CSI2 as well, but this is currently unsupported. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Cc: Rob Herring <robh+dt@kernel.org> To: linux-media@vger.kernel.org Signed-off-by: Michael Tretter <m.tretter@pengutronix.de> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [Sakari Ailus: Always call pm_runtime_get_and_resume in pre_streamon] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
* media: Add a driver for the og01a1b camera sensorShawn Tu2022-03-041-0/+1
| | | | | | | | | | | | | | | | | | | Add a V4L2 sub-device driver for Omnivision og01a1b b&w image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 1280x1024 at 120FPS Signed-off-by: Shawn Tu <shawnx.tu@intel.com> [Sakari Ailus: Update according to recent v4l2-async API changes] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
* media: i2c: Add ov08d10 camera sensor driverJimmy Su2022-01-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Add a v4l2 sub-device driver for the OmniVision ov08d10 image sensor. This camera sensor is using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - supported resolution: - 3280x2460 at 30 FPS - 3264x2448 at 30 FPS - 1632x1224 at 30 FPS - supported bayer order output: - SGRBG10 as default - SBGGR10 at flip mode - SRGGB10 at mirror mode - SGBRG10 at flip + mirror mode Signed-off-by: Jimmy Su <jimmy.su@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: hi847: Add support for Hi-847 sensorShawn Tu2022-01-281-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | Add a V4L2 sub-device driver for Hynix Hi-847 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - vflip/hflip control support - keep SGRBG10 Bayer order output - support following resolutions: + 3264x2448 at 30FPS + 1632x1224 at 60FPS [Sakari Ailus: Wrapped a few long lines.] Signed-off-by: Shawn Tu <shawnx.tu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: i2c: Add support for ov5693 sensorDaniel Scally2021-11-301-0/+1
| | | | | | | | | | | | | | | | | | | | The OV5693 is a 5 Mpx CMOS image sensor, connected via MIPI CSI-2. The chip is capable of a single lane configuration, but currently only two lanes are supported. Most of the sensor's features are supported, with the main exception being the lens correction algorithm. The driver provides all mandatory, optional and recommended V4L2 controls for maximum compatibility with libcamera. [mchehab: fixed a coding style warning] Signed-off-by: Daniel Scally <djrscally@gmail.com> Tested-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Reviewed-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: add driver for the SK Hynix Hi-846 8M pixel cameraMartin Kepplinger2021-10-081-0/+1
| | | | | | | | | | | | | | | | | | | | The SK Hynix Hi-846 is a 1/4" 8M Pixel CMOS Image Sensor. It supports usual features like I2C control, CSI-2 for frame data, digital/analog gain control or test patterns. This driver supports the 640x480, 1280x720 and 1632x1224 resolution modes. It supports runtime PM in order not to draw any unnecessary power. The part is also called YACG4D0C9SHC and a datasheet can be found at https://product.skhynix.com/products/cis/cis.go The large sets of partly undocumented register values are for example found when searching for the hi846_mipi_raw_Sensor.c Android driver. Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm> Reviewed-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: Add sensor driver support for the ov13b10 camera.Arec Kao2021-09-301-0/+1
| | | | | | | | | | | | | | | | This driver supports following features: - phase detection auto focus (PDAF) - manual exposure and analog/digital gain control - vblank/hblank control - test pattern - image vertical flip and horizontal mirror control - 4208x3120 at 30FPS - 2080x1170 at 60FPS Signed-off-by: Arec Kao <arec.kao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Add ov9282 camera sensor driverMartina Krasteva2021-08-041-0/+1
| | | | | | | | | | | | | | | | | | | | | Add a v4l2 sub-device driver for the OmniVisison ov9282 black&white image sensor. The camera sensor uses the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 1280x720 @ 30fps [Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.] Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by: Paul J. Murphy <paul.j.murphy@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Add imx412 camera sensor driverMartina Krasteva2021-08-041-1/+1
| | | | | | | | | | | | | | | | | | | | | | Add a v4l2 sub-device driver for the Sony imx412 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 4056x3040 @ 30fps - supported bayer order output: - SRGGB10 [Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.] Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by: Paul J. Murphy <paul.j.murphy@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Add imx335 camera sensor driverMartina Krasteva2021-08-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | Add a v4l2 sub-device driver for the Sony imx335 image sensor. ThE camera sensor uses the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 2592x1940 @ 30fps - supported bayer order output: - SRGGB12 [Sakari Ailus: Rebase on commit c802a4174beeb25cb539c806c9d0d3c0f61dfa53.] Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by: Paul J. Murphy <paul.j.murphy@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: imx208: Add imx208 camera sensor driverShawn Tu2021-06-021-0/+1
| | | | | | | | | | | | | | | | Add a V4L2 sub-device driver for the Sony IMX208 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. [Sakari Ailus: Rename sensor async register function to make it compile, use exposure_max and wrap a few long lines.] Signed-off-by: Ping-Chung Chen <ping-chung.chen@intel.com> Signed-off-by: Yeh, Andy <andy.yeh@intel.com> Signed-off-by: Shawn Tu <shawnx.tu@intel.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Kconfig: Make MAX9271 a moduleJacopo Mondi2021-02-091-4/+3
| | | | | | | | | | | | | | | | | | | | | | | | With the introduction of the RDACM21 camera module support in commit a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module") the symbols defined by the max9271 library were exported twice if multiple users of the library were compiled in at the same time. In example: WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_set_serial_link' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko Fix this by making the max9271 file a module and have the driver using its functions select it. Fixes: a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Add imx334 camera sensor driverMartina Krasteva2021-02-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | Add a v4l2 sub-device driver for the Sony imx334 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 3840x2160 @ 60fps - supported bayer order output: - SRGGB12 Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com> Reviewed-by: Gjorgji Rosikopulos <gjorgjix.rosikopulos@intel.com> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by: Paul J. Murphy <paul.j.murphy@intel.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Add driver for RDACM21 camera moduleJacopo Mondi2021-02-061-0/+2
| | | | | | | | | | | | | | The RDACM21 is a GMSL camera supporting 1280x1080 resolution images developed by IMI based on an Omnivision OV10640 sensor, an Omnivision OV490 ISP and a Maxim MAX9271 GMSL serializer. The driver uses the max9271 library module, to maximize code reuse with other camera module drivers using the same serializer, such as rdacm20. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Add support for the OV8865 image sensorPaul Kocialkowski2021-01-121-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The OV8865 is a 8 Mpx CMOS image sensor producing 3264x2448 at 30 fps. Other modes (including some with sub-sampling) are available too. It outputs 10-bit bayer CFA data through a MIPI CSI-2 interface with up to 4 lanes supported. Some register initialisation sequences are still needed for this driver, as they cover registers for which no documentation is available. This work is based on the first version of the driver submitted by Kévin L'hôpital, which was adapted to mainline from the Allwinner BSP. This version is a rewrite of the first version that matches the structure of the OV5648 driver, with explicit PLL configuration, all the necessary mode-specific fields, associatied registers and reduced static sequences. It was tested with the Banana Pi Camera Board v3 and the Banana Pi M3. Co-developed-by: Kévin L'hôpital <kevin.lhopital@bootlin.com> Signed-off-by: Kévin L'hôpital <kevin.lhopital@bootlin.com> Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Add support for the OV5648 image sensorPaul Kocialkowski2021-01-121-0/+1
| | | | | | | | | | | | | | | | | | | The OV5648 is a 5 Mpx CMOS image sensor, connected via MIPI CSI-2 in a one or two lane configuration. Most of the features of the hardware are supported, including: - Auto and manual exposition/gain - Auto and manual white balance - Horizontal and vertical flip - Test patterns But the following are still missing: - Debanding, based on power source frequency; - Exposition setting correlated to time units. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: smiapp-pll: Rename as ccs-pllSakari Ailus2020-12-031-1/+1
| | | | | | | | | | | MIPI CCS replaces SMIA and SMIA++ as the current standard. CCS brings new features while existing functionality will be supported. Rename the smiapp-pll as ccs-pll accordingly. Also add Intel copyright to the files. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: add OV02A10 image sensor driverDongchun Zhu2020-12-021-0/+1
| | | | | | | | | Add a V4L2 sub-device driver for OmniVision OV02A10 image sensor. Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: smiapp: Rename as "ccs"Sakari Ailus2020-12-021-1/+1
| | | | | | | | | | | | Rename the "smiapp" driver as "ccs". MIPI CCS is the contemporary standard for raw Bayer camera sensors. The driver retains support for the SMIA++ and SMIA compliant camera sensors. A module alias is added for old user space using "smiapp" module name. Add Intel copyright while at it. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Add ov9734 image sensor driverTianshu Qiu2020-11-251-0/+1
| | | | | | | | | | | | Add a v4l2 sub-device driver for the OminiVision ov9734 image sensor which can deliver maximum 720p image frames at 30 fps. This driver also add vertical blanking, exposure, test pattern, digital and analog gain control for the image sensor. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Add RDACM20 driverJacopo Mondi2020-07-191-0/+2
| | | | | | | | | | | | | | | | | The RDACM20 is a GMSL camera supporting 1280x800 resolution images developed by IMI based on an Omnivision 10635 sensor and a Maxim MAX9271 GMSL serializer. The GMSL link carries power, control (I2C) and video data over a single coax cable. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Add MAX9286 driverKieran Bingham2020-07-191-0/+1
| | | | | | | | | | | | | | | | | | The MAX9286 is a 4-channel GMSL deserializer with coax or STP input and CSI-2 output. The device supports multicamera streaming applications, and features the ability to synchronise the attached cameras. CSI-2 output can be configured with 1 to 4 lanes, and a control channel is supported over I2C, which implements an I2C mux to facilitate communications with connected cameras across the reverse control channel. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: dw9768: Add DW9768 VCM driverDongchun Zhu2020-07-191-0/+1
| | | | | | | | | | Add a V4L2 sub-device driver for DW9768 voice coil motor, providing control to set the desired focus via IIC serial interface. Signed-off-by: Dongchun Zhu <dongchun.zhu@mediatek.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Add ov2740 image sensor driverBingbu Cao2020-05-251-0/+1
| | | | | | | | | | | | | OminiVision ov2740 is a 2 megapixels RAW RGB image sensor which can deliver 1920x1080@60fps frames. This driver add the support of vertical blanking, exposure, test pattern, digital and analog gain control for sensor. Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Shawn Tu <shawnx.tu@intel.com> Signed-off-by: Qiu, Tianshu <tian.shu.qiu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
* media: i2c: Add driver for Sony IMX219 sensorDave Stevenson2020-02-271-0/+1
| | | | | | | | | | | | | | | Adds a driver for the 8MPix Sony IMX219 CSI2 sensor. Whilst the sensor supports 2 or 4 CSI2 data lanes, this driver currently only supports 2 lanes. 8MPix @ 15fps, 1080P @ 30fps (cropped FOV), and 1640x1232 (2x2 binned) @ 30fps are currently supported. [Sakari Ailus: make imx219_check_hwcfg static] Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: hi556: Add support for Hi-556 sensorShawn Tu2019-11-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | Add a V4L2 sub-device driver for Hynix Hi-556 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 2592x1944 at 30FPS + 1296x972 at 30FPS [sakari.ailus@linux.intel.com: Remove MEDIA_CAMERA_SUPPORT from Kconfig dependencies] Signed-off-by: Shawn Tu <shawnx.tu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
* media: i2c: Add IMX290 CMOS image sensor driverManivannan Sadhasivam2019-10-241-0/+1
| | | | | | | | | | | Add driver for Sony IMX290 CMOS image sensor driver. The driver only supports I2C interface for programming and MIPI CSI-2 for sensor output. [Sakari Ailus: Rewrapped a few lines over 80 chars a little.] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: ov5675: Add support for OV5675 sensorShawn Tu2019-08-151-0/+1
| | | | | | | | | | | | | | | | | | | | | | | Add a V4L2 sub-device driver for Omnivision ov5675 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 2592x1944 at 30FPS + 1296x972 at 30FPS [Sakari Ailus: Wrapped a few long lines.] [mchehab+samsung@kernel.org: fix a checkpatch warning] Signed-off-by: Shawn Tu <shawnx.tu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: i2c: fix warning same module namesAnders Roxell2019-06-211-1/+1
| | | | | | | | | | | | | | When building with CONFIG_VIDEO_ADV7511 and CONFIG_DRM_I2C_ADV7511 enabled as loadable modules, we see the following warning: drivers/gpu/drm/bridge/adv7511/adv7511.ko drivers/media/i2c/adv7511.ko Rework so that the file is named adv7511-v4l2.c. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: st-mipid02: MIPID02 CSI-2 to PARALLEL bridge driverMickael Guene2019-04-221-0/+1
| | | | | | | | This V4L2 subdev driver enables STMicroelectronics MIPID02 device. Signed-off-by: Mickael Guene <mickael.guene@st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: soc_camera: Move to the staging treeSakari Ailus2019-02-181-1/+0
| | | | | | | | | The SoC camera framework has no functional drivers left, something that has not changed for years. Move the leftovers to the staging tree. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: i2c: mt9m001: copy mt9m001 soc_camera sensor driverAkinobu Mita2019-01-251-0/+1
| | | | | | | | | | Copy the soc_camera based driver in v4l2 sensor driver directory. This commit just copies the original file without modifying it. Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: ov8856: Add support for OV8856 sensorBen Kao2019-01-251-0/+1
| | | | | | | | | | | | | | | | | | | | This patch adds driver for Omnivision's ov8856 sensor, the driver supports following features: - manual exposure/gain(analog and digital) control support - two link frequencies - VBLANK/HBLANK support - test pattern support - media controller support - runtime PM support - enable Vsync signal output - supported resolutions + 3280x2464 at 30FPS + 1640x1232 at 30FPS Signed-off-by: Ben Kao <ben.kao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: soc_camera: ov9640: move ov9640 out of soc_cameraPetr Cvek2019-01-161-0/+1
| | | | | | | | | | | | | | | | | | Initial part of ov9640 transition from soc_camera subsystem to a standalone v4l2 subdevice. The soc_camera version seems to be used only in Palm Zire72 and in (the future) HTC Magician. On these two devices the support is broken as pxa_camera driver doesn't use soc_camera anymore. The other mentions from git grep are "TODOs" (in board-osk.c) or chip names for unsupported sensors on HW which doesn't use soc_camera at all (irelevant). Copy the driver files from soc_camera and mark the original ones in the Kconfig description as obsoleted. Add config option VIDEO_OV9640 to the build files in drivers/media/i2c. Signed-off-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: imx214: Add imx214 camera sensor driverRicardo Ribalda Delgado2018-11-061-0/+1
| | | | | | | | | | | | | | | Add a V4L2 sub-device driver for the Sony IMX214 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. Tested on a DB820c alike board with Intrinsyc Open-Q 13MP camera. [Sakari Ailus: squash exposure time max limit patch] Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: add imx355 camera sensor driverBingbu Cao2018-10-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a v4l2 sub-device driver for the Sony imx355 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - 4 test patterns control support - vflip/hflip control support (will impact the output bayer order) - support following resolutions: - 3268x2448, 3264x2448, 3280x2464 @ 30fps - 1940x1096, 1936x1096, 1924x1080, 1920x1080 @ 60fps - 1640x1232, 1640x922, 1300x736, 1296x736, 1284x720, 1280x720 820x616 @ 120fps - support 4 bayer orders output (via change v/hflip) - SRGGB10(default), SGRBG10, SGBRG10, SBGGR10 [Sakari Ailus: Use do_div() for dividing 64-bit numbers, fix fwnode if usage] Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: add imx319 camera sensor driverBingbu Cao2018-10-051-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Add a v4l2 sub-device driver for the Sony imx319 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - 4 test patterns control support - vflip/hflip control support (will impact the output bayer order) - support following resolutions: - 3264x2448, 3280x2464 @ 30fps - 1936x1096, 1920x1080 @ 60fps - 1640x1232, 1640x922, 1296x736, 1280x720 @ 120fps - support 4 bayer orders output (via change v/hflip) - SRGGB10(default), SGRBG10, SGBRG10, SBGGR10 [Sakari Ailus: Replace 64-bit division by do_div(), fix fwnode if usage] Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: ov2680: Add Omnivision OV2680 sensor driverRui Miguel Silva2018-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | This patch adds V4L2 sub-device driver for OV2680 image sensor. The OV2680 is a 1/5" CMOS color sensor from Omnivision. Supports output format: 10-bit Raw RGB. The OV2680 has a single lane MIPI interface. The driver exposes following V4L2 controls: - auto/manual exposure, - exposure, - auto/manual gain, - gain, - horizontal/vertical flip, - test pattern menu. Supported resolution are only: QUXGA, 720P, UXGA. [Sakari Ailus: Drop "-level" from Kconfig help text] Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: i2c: Add driver for Aptina MT9V111Jacopo Mondi2018-07-271-0/+1
| | | | | | | | | | | | Add V4L2 sensor driver for Aptina MT9V111 CMOS image sensor. The MT9V111 is a 1/4-Inch CMOS image sensor based on MT9V011 with an integrated Image Flow Processor. Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: dw9807-vcm: Recognise this is just the VCM bit of the deviceSakari Ailus2018-07-271-1/+1
| | | | | | | | | The dw9807 contains a voice coil lens driver as well as an EEPROM. This driver is just for the VCM. Reflect this in the driver's name --- this is already the case for the compatible string, for instance. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: ak7375: Add ak7375 lens voice coil driverBingbu Cao2018-07-041-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Add a v4l2 sub-device driver for the ak7375 lens voice coil. This is a voice coil module using the i2c bus to control the focus position. ak7375 can write multiple bytes of data at a time. If more data is received instead of the stop condition after receiving one byte of data, the address inside the chip is automatically incremented and the data is written into the next address. The ak7375 can control the position with 12 bits value and consists of two 8 bit registers show as below: register 0x00(AK7375_REG_POSITION): +---+---+---+---+---+---+---+---+ |D11|D10|D09|D08|D07|D06|D05|D04| +---+---+---+---+---+---+---+---+ register 0x01: +---+---+---+---+---+---+---+---+ |D03|D02|D01|D00|---|---|---|---| +---+---+---+---+---+---+---+---+ This driver support : - set ak7375 to standby mode once suspend and turn it back to active if resume - set the position via V4L2_CID_FOCUS_ABSOLUTE ctrl [Sakari Ailus: Rename val as ret in probe, drop redundant error message] Signed-off-by: Tianshu Qiu <tian.shu.qiu@intel.com> Signed-off-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: dw9807: Add dw9807 vcm driverAlan Chiang2018-06-281-0/+1
| | | | | | | | | | | | | | | DW9807 is a 10 bit DAC from Dongwoon, designed for linear control of voice coil motor. This driver creates a V4L2 subdevice and provides control to set the desired focus. Signed-off-by: Alan Chiang <alanx.chiang@intel.com> Signed-off-by: Andy Yeh <andy.yeh@intel.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: i2c: rj54n1: Remove soc_camera dependenciesJacopo Mondi2018-06-281-0/+1
| | | | | | | | | | | | | | | | | | Remove soc_camera framework dependencies from rj54n1 sensor driver. - Handle clock - Handle GPIOs (named 'powerup' and 'enable') - Register the async subdevice - Remove g/s_mbus_config as they're deprecated. - Adjust build system - List the driver as maintained for 'Odd Fixes' as I don't have HW to test. This commits does not remove the original soc_camera based driver. Compiled tested only. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: imx258: Add imx258 camera sensor driverJason Chen2018-05-281-0/+1
| | | | | | | | | | | | | Add a V4L2 sub-device driver for the Sony IMX258 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. Signed-off-by: Jason Chen <jasonx.z.chen@intel.com> Signed-off-by: Andy Yeh <andy.yeh@intel.com> Signed-off-by: Alan Chiang <alanx.chiang@intel.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: Add a driver for the ov7251 camera sensorTodor Tomov2018-05-171-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | The ov7251 sensor is a 1/7.5-Inch B&W VGA (640x480) CMOS Digital Image Sensor from Omnivision. The driver supports the following modes: - 640x480 30fps - 640x480 60fps - 640x480 90fps Output format is 10bit B&W RAW - MEDIA_BUS_FMT_Y10_1X10. The driver supports configuration via user controls for: - exposure and gain; - horizontal and vertical flip; - test pattern. [Sakari Ailus: Wrap a line over 80 characters, fix trivial sparse warning] Signed-off-by: Todor Tomov <todor.tomov@linaro.org> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: video-i2c: add video-i2c driverMatt Ranostay2018-05-041-0/+1
| | | | | | | | | | | | There are several thermal sensors that only have a low-speed bus interface but output valid video data. This patchset enables support for the AMG88xx "Grid-Eye" sensor family. Signed-off-by: Matt Ranostay <matt.ranostay@konsulko.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> [hans.verkuil@cisco.com: split up int ret = ...->xfer(); line] Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
* media: i2c: mt9t112: Remove soc_camera dependenciesJacopo Mondi2018-03-211-0/+1
| | | | | | | | | | | | | | | | | | | | | Remove soc_camera framework dependencies from mt9t112 sensor driver. - Handle clk, gpios and power routines - Register async subdev - Remove deprecated g/s_mbus_config operations - Remove driver flags - Change driver interface and add kernel doc - Adjust build system - Fix code style issues reported by checkpatch in strict mode This commit does not remove the original soc_camera based driver as long as other platforms depends on soc_camera framework. As I don't have access to a working camera module, this change has only been compile tested. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit (git 2.34.1) at 2025-02-25 08:13:35 +0000