aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/wwan
Commit message (Collapse)AuthorAgeFilesLines
* wwan: iosm: use a flexible array rather than allocate short objectsJakub Kicinski2022-05-201-4/+1
| | | | | | | | | | | | GCC array-bounds warns that ipc_coredump_get_list() under-allocates the size of struct iosm_cd_table *cd_table. This is avoidable - we just need a flexible array. Nothing calls sizeof() on struct iosm_cd_list or anything that contains it. Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Link: https://lore.kernel.org/r/20220520060013.2309497-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: wwan: t7xx: use GFP_ATOMIC under spin lock in t7xx_cldma_gpd_set_next_ptr()Yang Yingliang2022-05-201-5/+5
| | | | | | | | | | | | | Sometimes t7xx_cldma_gpd_set_next_ptr() is called under spin lock, so add 'gfp_mask' parameter in t7xx_cldma_gpd_set_next_ptr() to pass the flag. Fixes: 39d439047f1d ("net: wwan: t7xx: Add control DMA interface") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/20220519032108.2996400-1-yangyingliang@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: wwan: iosm: remove pointless null checkJakub Kicinski2022-05-191-10/+0
| | | | | | | | | | | | | | | | | GCC 12 warns: drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c: In function ‘ipc_protocol_dl_td_process’: drivers/net/wwan/iosm/iosm_ipc_protocol_ops.c:406:13: warning: the comparison will always evaluate as ‘true’ for the address of ‘cb’ will never be NULL [-Waddress] 406 | if (!IPC_CB(skb)) { | ^ Indeed the check seems entirely pointless. Hopefully the other validation checks will catch if the cb is bad, but it can't be NULL. Reviewed-by: M Chetan Kumar <m.chetan.kumar@intel.com> Link: https://lore.kernel.org/r/20220519004342.2109832-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: wwan: t7xx: Fix smatch errorsRicardo Martinez2022-05-193-6/+3
| | | | | | | | | | | | | | | | | | t7xx_request_irq() error: uninitialized symbol 'ret'. t7xx_core_hk_handler() error: potentially dereferencing uninitialized 'event'. If the condition to enter the loop that waits for the handshake event is false on the first iteration then the uninitialized 'event' will be dereferenced, fix this by initializing 'event' to NULL. t7xx_port_proxy_recv_skb() warn: variable dereferenced before check 'skb'. No need to check skb at t7xx_port_proxy_recv_skb() since we know it is always called with a valid skb by t7xx_cldma_gpd_rx_from_q(). Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Link: https://lore.kernel.org/r/20220518195529.126246-1-ricardo.martinez@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: wwan: t7xx: Avoid calls to skb_data_area_size()Ricardo Martinez2022-05-162-8/+5
| | | | | | | | | | | skb_data_area_size() helper was used to calculate the size of the DMA mapped buffer passed to the HW. Instead of doing this, use the size passed to allocate the skbs. Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: wwan: t7xx: Fix return type of t7xx_dl_add_timedout()YueHaibing2022-05-161-4/+2
| | | | | | | | t7xx_dl_add_timedout() now return int 'ret', but the return type is bool. Change the return type to int for furthor errcode upstream. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: t7xx: Device deep sleep lock/unlockHaijun Liu2022-05-096-15/+158
| | | | | | | | | | | | | | | Introduce the mechanism to lock/unlock the device 'deep sleep' mode. When the PCIe link state is L1.2 or L2, the host side still can keep the device is in D0 state from the host side point of view. At the same time, if the device's 'deep sleep' mode is unlocked, the device will go to 'deep sleep' while it is still in D0 state on the host side. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: t7xx: Runtime PMHaijun Liu2022-05-094-0/+68
| | | | | | | | | | | | | | Enables runtime power management callbacks including runtime_suspend and runtime_resume. Autosuspend is used to prevent overhead by frequent wake-ups. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Co-developed-by: Eliot Lee <eliot.lee@intel.com> Signed-off-by: Eliot Lee <eliot.lee@intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: t7xx: Introduce power managementHaijun Liu2022-05-098-1/+700
| | | | | | | | | | | | | | | | | | | | Implements suspend, resumes, freeze, thaw, poweroff, and restore `dev_pm_ops` callbacks. From the host point of view, the t7xx driver is one entity. But, the device has several modules that need to be addressed in different ways during power management (PM) flows. The driver uses the term 'PM entities' to refer to the 2 DPMA and 2 CLDMA HW blocks that need to be managed during PM flows. When a dev_pm_ops function is called, the PM entities list is iterated and the matching function is called for each entry in the list. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: t7xx: Add WWAN network interfaceHaijun Liu2022-05-094-1/+489
| | | | | | | | | | | | | | | | | | Creates the Cross Core Modem Network Interface (CCMNI) which implements the wwan_ops for registration with the WWAN framework, CCMNI also implements the net_device_ops functions used by the network device. Network device operations include open, close, start transmission, TX timeout and change MTU. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Co-developed-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: t7xx: Add data path interfaceHaijun Liu2022-05-097-0/+2758
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Data Path Modem AP Interface (DPMAIF) HIF layer provides methods for initialization, ISR, control and event handling of TX/RX flows. DPMAIF TX Exposes the 'dmpaif_tx_send_skb' function which can be used by the network device to transmit packets. The uplink data management uses a Descriptor Ring Buffer (DRB). First DRB entry is a message type that will be followed by 1 or more normal DRB entries. Message type DRB will hold the skb information and each normal DRB entry holds a pointer to the skb payload. DPMAIF RX The downlink buffer management uses Buffer Address Table (BAT) and Packet Information Table (PIT) rings. The BAT ring holds the address of skb data buffer for the HW to use, while the PIT contains metadata about a whole network packet including a reference to the BAT entry holding the data buffer address. The driver reads the PIT and BAT entries written by the modem, when reaching a threshold, the driver will reload the PIT and BAT rings. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: t7xx: Data path HW layerHaijun Liu2022-05-093-0/+1675
| | | | | | | | | | | | | | | Data Path Modem AP Interface (DPMAIF) HW layer provides HW abstraction for the upper layer (DPMAIF HIF). It implements functions to do the HW configuration, TX/RX control and interrupt handling. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: t7xx: Add AT and MBIM WWAN portsChandrashekar Devegowda2022-05-094-0/+198
| | | | | | | | | | | | | | | Adds AT and MBIM ports to the port proxy infrastructure. The initialization method is responsible for creating the corresponding ports using the WWAN framework infrastructure. The implemented WWAN port operations are start, stop, and TX. Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: t7xx: Add control portHaijun Liu2022-05-099-3/+561
| | | | | | | | | | | | | | | | | | | | Control Port implements driver control messages such as modem-host handshaking, controls port enumeration, and handles exception messages. The handshaking process between the driver and the modem happens during the init sequence. The process involves the exchange of a list of supported runtime features to make sure that modem and host are ready to provide proper feature lists including port enumeration. Further features can be enabled and controlled in this handshaking process. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: t7xx: Add port proxy infrastructureHaijun Liu2022-05-097-2/+677
| | | | | | | | | | | | | | | | Port-proxy provides a common interface to interact with different types of ports. Ports export their configuration via `struct t7xx_port` and operate as defined by `struct port_ops`. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Co-developed-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: t7xx: Add core componentsHaijun Liu2022-05-0914-0/+2108
| | | | | | | | | | | | | | | | | | | | | | | | | Registers the t7xx device driver with the kernel. Setup all the core components: PCIe layer, Modem Host Cross Core Interface (MHCCIF), modem control operations, modem state machine, and build infrastructure. * PCIe layer code implements driver probe and removal. * MHCCIF provides interrupt channels to communicate events such as handshake, PM and port enumeration. * Modem control implements the entry point for modem init, reset and exit. * The modem status monitor is a state machine used by modem control to complete initialization and stop. It is used also to propagate exception events reported by other components. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: t7xx: Add control DMA interfaceHaijun Liu2022-05-095-0/+1812
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Cross Layer DMA (CLDMA) Hardware interface (HIF) enables the control path of Host-Modem data transfers. CLDMA HIF layer provides a common interface to the Port Layer. CLDMA manages 8 independent RX/TX physical channels with data flow control in HW queues. CLDMA uses ring buffers of General Packet Descriptors (GPD) for TX/RX. GPDs can represent multiple or single data buffers (DB). CLDMA HIF initializes GPD rings, registers ISR handlers for CLDMA interrupts, and initializes CLDMA HW registers. CLDMA TX flow: 1. Port Layer write 2. Get DB address 3. Configure GPD 4. Triggering processing via HW register write CLDMA RX flow: 1. CLDMA HW sends a RX "done" to host 2. Driver starts thread to safely read GPD 3. DB is sent to Port layer 4. Create a new buffer for GPD ring Note: This patch does not enable compilation since it has dependencies such as t7xx_pcie_mac_clear_int()/t7xx_pcie_mac_set_int() and struct t7xx_pci_dev which are added by the core patch. Signed-off-by: Haijun Liu <haijun.liu@mediatek.com> Signed-off-by: Chandrashekar Devegowda <chandrashekar.devegowda@intel.com> Co-developed-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Signed-off-by: Ricardo Martinez <ricardo.martinez@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* wwan_hwsim: Avoid flush_scheduled_work() usageTetsuo Handa2022-04-251-5/+17
| | | | | | | | | | | | | | | | | Flushing system-wide workqueues is dangerous and will be forbidden. Replace system_wq with local wwan_wq. While we are at it, make err_clean_devs: label of wwan_hwsim_init() behave like wwan_hwsim_exit(), for it is theoretically possible to call wwan_hwsim_debugfs_devcreate_write()/wwan_hwsim_debugfs_devdestroy_write() by the moment wwan_hwsim_init_devs() returns. Link: https://lkml.kernel.org/r/49925af7-78a8-a3dd-bce6-cfc02e1a9236@I-love.SAKURA.ne.jp Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Link: https://lore.kernel.org/r/7390d51f-60e2-3cee-5277-b819a55ceabe@I-love.SAKURA.ne.jp Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2022-03-231-1/+1
|\ | | | | | | | | | | Merge in overtime fixes, no conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: wwan: qcom_bam_dmux: fix wrong pointer passed to IS_ERR()Yang Yingliang2022-03-221-1/+1
| | | | | | | | | | | | | | | | | | | | It should check dmux->tx after calling dma_request_chan(). Fixes: 21a0ffd9b38c ("net: wwan: Add Qualcomm BAM-DMUX WWAN network driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Stephan Gerhold <stephan@gerhold.net> Link: https://lore.kernel.org/r/20220319032450.3288224-1-yangyingliang@huawei.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* | net: wwan: iosm: drop debugfs dev referenceM Chetan Kumar2022-02-142-2/+5
| | | | | | | | | | | | | | | | Post debugfs use call wwan_put_debugfs_dir()to drop debugfs dev reference. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: wwan: debugfs obtained dev reference not droppedM Chetan Kumar2022-02-141-0/+36
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | WWAN driver call's wwan_get_debugfs_dir() to obtain WWAN debugfs dir entry. As part of this procedure it returns a reference to a found device. Since there is no debugfs interface available at WWAN subsystem, it is not possible to drop dev reference post debugfs use. This leads to side effects like post wwan driver load and reload the wwan instance gets increment from wwanX to wwanX+1. A new debugfs interface is added in wwan subsystem so that wwan driver can drop the obtained dev reference post debugfs use. void wwan_put_debugfs_dir(struct dentry *dir) Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: wwan: iosm: Enable M.2 7360 WWAN card supportM Chetan Kumar2022-02-1310-78/+1033
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch enables Intel M.2 7360 WWAN card support on IOSM Driver. Control path implementation is a reuse whereas data path implementation it uses a different protocol called as MUX Aggregation. The major portion of this patch covers the MUX Aggregation protocol implementation used for IP traffic communication. For M.2 7360 WWAN card, driver exposes 2 wwan AT ports for control communication. The user space application or the modem manager to use wwan AT port for data path establishment. During probe, driver reads the mux protocol device capability register to know the mux protocol version supported by device. Base on which the right mux protocol is initialized for data path communication. An overview of an Aggregation Protocol 1> An IP packet is encapsulated with 16 octet padding header to form a Datagram & the start offset of the Datagram is indexed into Datagram Header (DH). 2> Multiple such Datagrams are composed & the start offset of each DH is indexed into Datagram Table Header (DTH). 3> The Datagram Table (DT) is IP session specific & table_length item in DTH holds the number of composed datagram pertaining to that particular IP session. 4> And finally the offset of first DTH is indexed into DBH (Datagram Block Header). So in TX/RX flow Datagram Block (Datagram Block Header + Payload)is exchanged between driver & device. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: Fix MRU mismatch issue which may lead to data connection lostSlark Xiao2022-01-151-2/+2
| | | | | | | | | | | | | | In pci_generic.c there is a 'mru_default' in struct mhi_pci_dev_info. This value shall be used for whole mhi if it's given a value for a specific product. But in function mhi_net_rx_refill_work(), it's still using hard code value MHI_DEFAULT_MRU. 'mru_default' shall have higher priority than MHI_DEFAULT_MRU. And after checking, this change could help fix a data connection lost issue. Fixes: 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU") Signed-off-by: Shujun Wang <wsj20369@163.com> Signed-off-by: Slark Xiao <slark_xiao@163.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* Revert "net: wwan: iosm: Keep device at D0 for s2idle case"M Chetan Kumar2022-01-041-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | Depending on BIOS configuration IOSM driver exchanges protocol required for putting device into D3L2 or D3L1.2. ipc_pcie_suspend_s2idle() is implemented to put device to D3L1.2. This patch forces PCI core know this device should stay at D0. - pci_save_state()is expensive since it does a lot of slow PCI config reads. The reported issue is not observed on x86 platform. The supurios wake on AMD platform needs to be futher debugged with orignal patch submitter [1]. Also the impact of adding pci_save_state() needs to be assessed by testing it on other platforms. This reverts commit f4dd5174e273("net: wwan: iosm: Keep device at D0 for s2idle case"). [1] https://lore.kernel.org/all/20211224081914.345292-2-kai.heng.feng@canonical.com/ Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Link: https://lore.kernel.org/r/20220104150213.1894-1-m.chetan.kumar@linux.intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: wwan: iosm: Keep device at D0 for s2idle caseKai-Heng Feng2021-12-271-0/+3
| | | | | | | | | | | | | | | | We are seeing spurious wakeup caused by Intel 7560 WWAN on AMD laptops. This prevent those laptops to stay in s2idle state. >From what I can understand, the intention of ipc_pcie_suspend() is to put the device to D3cold, and ipc_pcie_suspend_s2idle() is to keep the device at D0. However, the device can still be put to D3hot/D3cold by PCI core. So explicitly let PCI core know this device should stay at D0, to solve the spurious wakeup. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: iosm: Let PCI core handle PCI power transitionKai-Heng Feng2021-12-271-47/+2
| | | | | | | | | pci_pm_suspend_noirq() and pci_pm_resume_noirq() already handle power transition for system-wide suspend and resume, so it's not necessary to do it in the driver. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: iosm: correct open parenthesis alignmentM Chetan Kumar2021-12-101-1/+1
| | | | | | | | | Fix checkpatch warning in iosm_ipc_mmio.c - Alignment should match open parenthesis Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: wwan: iosm: removed unused function declM Chetan Kumar2021-12-101-10/+0
| | | | | | | | | | | ipc_wwan_tx_flowctrl() is declared in iosm_ipc_wwan.h but is not defined. Removed the dead code. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: wwan: iosm: release data channel in case no active IP sessionM Chetan Kumar2021-12-104-21/+27
| | | | | | | | | | | | | If there is no active IP session (interface up & running) then release the data channel. Use nr_sessions variable to track current active IP sessions. If the count drops to 0, then send pipe close ctrl message to release the data channel. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* net: wwan: iosm: set tx queue lenM Chetan Kumar2021-12-101-1/+2
| | | | | | | | Set wwan net dev tx queue len to DEFAULT_TX_QUEUE_LEN. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2021-12-093-18/+19
|\ | | | | | | | | | | No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: wwan: iosm: fixes unable to send AT command during mbim txM Chetan Kumar2021-12-093-10/+0
| | | | | | | | | | | | | | | | | | | | | | ev_cdev_write_pending flag is preventing a TX message post for AT port while MBIM transfer is ongoing. Removed the unnecessary check around control port TX transfer. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: wwan: iosm: fixes net interface nonfunctional after fw flashM Chetan Kumar2021-12-093-1/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | Devlink initialization flow was overwriting the IP traffic channel configuration. This was causing wwan0 network interface to be unusable after fw flash. When device boots to fully functional mode restore the IP channel configuration. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
| * net: wwan: iosm: fixes unnecessary doorbell sendM Chetan Kumar2021-12-091-7/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | In TX packet accumulation flow transport layer is giving a doorbell to device even though there is no pending control TX transfer that needs immediate attention. Introduced a new hpda_ctrl_pending variable to keep track of pending control TX transfer. If there is a pending control TX transfer which needs an immediate attention only then give a doorbell to device. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: wwan: make debugfs optionalSergey Ryazanov2021-12-088-10/+61
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Debugfs interface is optional for the regular modem use. Some distros and users will want to disable this feature for security or kernel size reasons. So add a configuration option that allows to completely disable the debugfs interface of the WWAN devices. A primary considered use case for this option was embedded firmwares. For example, in OpenWrt, you can not completely disable debugfs, as a lot of wireless stuff can only be configured and monitored with the debugfs knobs. At the same time, reducing the size of a kernel and modules is an essential task in the world of embedded software. Disabling the WWAN and IOSM debugfs interfaces allows us to save 50K (x86-64 build) of space for module storage. Not much, but already considerable when you only have 16MB of storage. So it is hard to just disable whole debugfs. Users need some fine grained set of options to control which debugfs interface is important and should be available and which is not. The new configuration symbol is enabled by default and is hidden under the EXPERT option. So a regular user would not be bothered by another one configuration question. While an embedded distro maintainer will be able to a little more reduce the final image size. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: wwan: iosm: move debugfs knobs into a subdirSergey Ryazanov2021-12-086-8/+49
| | | | | | | | | | | | | | | | | | | | | | The modem traces collection is a device (and so driver) specific option. Therefore, move the related debugfs files into a driver-specific subdirectory under the common per WWAN device directory. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: wwan: iosm: allow trace port be uninitializedSergey Ryazanov2021-12-083-5/+11
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Collecting modem firmware traces is optional for the regular modem use. There are not many reasons for aborting device initialization due to an inability to initialize the trace port and (or) its debugfs interface. So, demote the initialization failure erro message into a warning and do not break the initialization sequence in this case. Rework packet processing and deinitialization so that they do not crash in case of uninitialized trace port. This change is mainly a preparation for an upcoming configuration option introduction that will help disable driver debugfs functionality. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: wwan: iosm: consolidate trace port init codeSergey Ryazanov2021-12-084-21/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Move the channel related structures initialization from ipc_imem_channel_init() to ipc_trace_init() and call it directly. On the one hand, this makes the trace port initialization symmetric to the deitialization, that is, it removes the additional wrapper. On the other hand, this change consolidates the trace port related code into a single source file, what facilitates an upcoming disabling of this functionality by a user choise. Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Acked-by: M Chetan Kumar <m.chetan.kumar@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: wwan: iosm: select CONFIG_RELAYArnd Bergmann2021-12-061-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The iosm driver started using relayfs, but is missing the Kconfig logic to ensure it's built into the kernel: x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_create_buf_file_handler': iosm_ipc_trace.c:(.text+0x16): undefined reference to `relay_file_operations' x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_subbuf_start_handler': iosm_ipc_trace.c:(.text+0x31): undefined reference to `relay_buf_full' x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_ctrl_file_write': iosm_ipc_trace.c:(.text+0xd5): undefined reference to `relay_flush' x86_64-linux-ld: drivers/net/wwan/iosm/iosm_ipc_trace.o: in function `ipc_trace_port_rx': Fixes: 00ef32565b9b ("net: wwan: iosm: device trace collection using relayfs") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sergey Ryazanov <ryazanov.s.a@gmail.com> Reviewed-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Link: https://lore.kernel.org/r/20211204174033.950528-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
* | net: wwan: Add Qualcomm BAM-DMUX WWAN network driverStephan Gerhold2021-11-293-0/+921
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The BAM Data Multiplexer provides access to the network data channels of modems integrated into many older Qualcomm SoCs, e.g. Qualcomm MSM8916 or MSM8974. It is built using a simple protocol layer on top of a DMA engine (Qualcomm BAM) and bidirectional interrupts to coordinate power control. The modem announces a fixed set of channels by sending an OPEN command. The driver exports each channel as separate network interface so that a connection can be established via QMI from userspace. The network interface can work either in Ethernet or Raw-IP mode (configurable via QMI). However, Ethernet mode seems to be broken with most firmwares (network packets are actually received as Raw-IP), therefore the driver only supports Raw-IP mode. Note that the control channel (QMI/AT) is entirely separate from BAM-DMUX and is already supported by the RPMSG_WWAN_CTRL driver. The driver uses runtime PM to coordinate power control with the modem. TX/RX buffers are put in a kind of "ring queue" and submitted via the bam_dma driver of the DMAEngine subsystem. The basic architecture looks roughly like this: +------------+ +-------+ [IPv4/6] | BAM-DMUX | | | [Data...] | | | | ---------->|wwan0 | [DMUX chan: x] | | [IPv4/6] | (chan: 0) | [IPv4/6] | | [Data...] | | [Data...] | | ---------->|wwan1 |--------------->| Modem | | (chan: 1) | BAM | | [IPv4/6] | ... | (DMA Engine) | | [Data...] | | | | ---------->|wwan7 | | | | (chan: 7) | | | +------------+ +-------+ Note that some newer firmware versions support QMAP ("rmnet" driver) as additional multiplexing layer on top of BAM-DMUX, but this is not currently supported by this driver. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: wwan: iosm: device trace collection using relayfsM Chetan Kumar2021-11-228-13/+271
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch brings in support for device trace collection. It implements relayfs interface for pushing device trace from kernel space to user space. Driver gets the debugfs base directory associated to WWAN Device and creates trace_control and trace debugfs for device tracing. Both trace_control & trace debugfs are created under /sys/kernel/debug/wwan/wwan0/. In order to collect device trace on trace0 interface, user need to write 1 to trace_ctl interface. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* | net: wwan: common debugfs base dir for wwan deviceM Chetan Kumar2021-11-221-2/+28
|/ | | | | | | | | | | | | | | | | | | | | | | | | This patch set brings in a common debugfs base directory i.e. /sys/kernel/debugfs/wwan/ in WWAN Subsystem for a WWAN device instance. So that it avoids driver polluting debugfs root with unrelated directories & possible name collusion. Having a common debugfs base directory for WWAN drivers eases user to match control devices with debugfs entries. WWAN Subsystem creates dentry (/sys/kernel/debugfs/wwan) on module load & removes dentry on module unload. When driver registers a new wwan device, dentry (wwanX) is created for WWAN device instance & on driver unregister dentry is removed. New API is introduced to return the wwan device instance dentry so that driver can create debugfs entries under it. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: iosm: fix compilation warningM Chetan Kumar2021-11-111-2/+0
| | | | | | | | | | curr_phase is unused. Removed the dead code. Fixes: 8d9be0634181 ("net: wwan: iosm: transport layer support for fw flashing/cd") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: iosm: correct devlink extra paramsM Chetan Kumar2021-10-023-98/+69
| | | | | | | | | | 1. Removed driver specific extra params like download_region, address & region_count. The required information is passed as part of flash API. 2. IOSM Devlink documentation updated to reflect the same. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: iosm: Move devlink_register to be last devlink commandLeon Romanovsky2021-09-271-5/+2
| | | | | | | | | | This change prevents from users to access device before devlink is fully configured. Indirectly this change fixes the commit mentioned below where devlink_unregister() was prematurely removed. Fixes: db4278c55fa5 ("devlink: Make devlink_register to be void") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: iosm: Use hrtimer_forward_now()Thomas Gleixner2021-09-241-2/+2
| | | | | | | | | | | | | | | | hrtimer_forward_now() is providing the same functionality. Preparation for making hrtimer_forward() timer core code only. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: netdev@vger.kernel.org Cc: Sergey Ryazanov <ryazanov.s.a@gmail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: M Chetan Kumar <m.chetan.kumar@intel.com> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Intel Corporation <linuxwwan@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: iosm: fw flashing and cd improvementsM Chetan Kumar2021-09-226-103/+87
| | | | | | | | | | 1> Function comments moved to .c file. 2> Use literals in return to improve readability. 3> Do error handling check instead of success check. 4> Redundant ret assignment removed. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* devlink: Make devlink_register to be voidLeon Romanovsky2021-09-221-7/+1
| | | | | | | | | | | | | | | devlink_register() can't fail and always returns success, but all drivers are obligated to check returned status anyway. This adds a lot of boilerplate code to handle impossible flow. Make devlink_register() void and simplify the drivers that use that API call. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Acked-by: Simon Horman <simon.horman@corigine.com> Acked-by: Vladimir Oltean <olteanv@gmail.com> # dsa Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* net: wwan: iosm: fw flashing & cd collection infrastructure changesM Chetan Kumar2021-09-202-1/+5
| | | | | | | | IOSM Makefile & WWAN Kconfig changes to support fw flashing & cd collection module compliation. Signed-off-by: M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-02-24 22:24:11 +0000