aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/pinctrl
Commit message (Collapse)AuthorAgeFilesLines
...
| * | | | pinctrl: rockchip: avoid hardirq-unsafe functions in irq_chipJohn Keeping2017-03-281-4/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With real-time preemption, regmap functions cannot be used in the implementation of irq_chip since they use spinlocks which may sleep. Move the setting of the mux for IRQs to an irq_bus_sync_unlock handler where we are allowed to sleep. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | | pinctrl: rockchip: split out verification of mux settingsJohn Keeping2017-03-281-16/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We need to avoid calling regmap functions from irq handlers, so the next commit is going to move the call to rockchip_set_mux() into an irq_bus_sync_unlock handler. But we can't return an error from there so we still need to check the settings from rockchip_irq_set_type() and we will use this new rockchip_verify_mux() function from there. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | | pinctrl: rockchip: convert to raw spinlockJohn Keeping2017-03-281-13/+13
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This lock is used from rockchip_irq_set_type() which is part of the irq_chip implementation and thus must use raw_spinlock_t as documented in Documentation/gpio/driver.txt. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | | pinctrl: rockchip: remove unnecessary lockingJohn Keeping2017-03-281-31/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | regmap_update_bits does its own locking and everything else accessed here is a local variable so there is no need to lock around it. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | | Merge tag 'sh-pfc-for-v4.12-tag1' of ↵Linus Walleij2017-03-242-87/+91
| |\| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into devel pinctrl: sh-pfc: Updates for v4.12 - Fixes and cleanups.
| | * | | pinctrl: sh-pfc: Update info pointer after SoC-specific initGeert Uytterhoeven2017-03-211-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Update the sh_pfc_soc_info pointer after calling the SoC-specific initialization function, as it may have been updated to e.g. handle different SoC revisions. This makes sure the correct subdriver name is printed later. Fixes: 0c151062f32c9db8 ("sh-pfc: Add support for SoC-specific initialization") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| | * | | pinctrl: sh-pfc: r8a7795: Restore sort orderGeert Uytterhoeven2017-03-211-85/+86
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Somehow the QSPI and SCIF_CLK fragments were inserted at the wrong positions. Restore sort order (alphabetically, per group). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| | * | | pinctrl: sh-pfc: r8a7795: Fix hscif2_clk_b and hscif4_ctrlGeert Uytterhoeven2017-03-211-2/+2
| | |/ / | | | | | | | | | | | | | | | | | | | | | | | | Fix typos in hscif2_clk_b_mux[] and hscif4_ctrl_mux[]. Fixes: a56069c46c102710 ("pinctrl: sh-pfc: r8a7795: Add HSCIF pins, groups, and functions") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
| * | | pinctrl: cherryview: Add support for GMMR GPIO opregionHans de Goede2017-03-231-0/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | On some Cherry Trail devices the ASL uses the GMMR GPIO to access GPIOs so as to serialize MMIO accesses to GPIO registers with the OS, because: "Due to a silicon issue, a shared lock must be used to prevent concurrent accesses across the 4 GPIO controllers. See Intel Atom Z8000 Processor Series Specification Update (Rev. 005), errata #CHT34, for further information." This commit adds support for this opregion, this fixes a number of ASL errors on my Ezpad mini3 tablet and makes the otg port device/host muxing which is controlled in firmware on this model work properly. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: rockchip: rename RK1108 to RV1108Andy Yan2017-03-231-38/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Rockchip finally named the SOC as RV1108, so change it. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> [adapted rk1108 dtsi to keep bisectability] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: rockchip: add irq_enable & irq_disable opsJeffy Chen2017-03-231-5/+6
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Currently we are trying to enable/disable the clk of irq's gpio bank when unmask/mask irq. But the kernel's "lazy disable approach" will skip masking irq when the irq chip doesn't support irq_disable ops. So we may hit this case: irq_enable-> enable clk irq_disable-> noop irq_enable-> enable clk again irq_disable-> noop Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: uniphier: make drivers non-modularMasahiro Yamada2017-03-239-72/+38
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | At first these drivers were written as tristate, but the module usecases are actually not tested. Make all of them boolean. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: uniphier: remove obsoleted compatiblesMasahiro Yamada2017-03-238-42/+23
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since commit 3e030b0b4e46 ("pinctrl: uniphier: allow to have pinctrl node under syscon node"), this driver has kept compatibility for the old DT files. Several releases have passed since then, so remove the obsoleted compatibles and clean up the code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: meson: gxl: add the missing PWM pin definitionsMartin Blumenstingl2017-03-231-0/+54
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds support for the missing PWM pins on Meson GXL SoCs, namely: - PWM_A - PWM_B - PWM_C - PWM_F (GPIOX_7 and GPIOCLK_1 can be selected as output) - PWM_AO_A (GPIOAO_3 and GPIOAO_8 can be selected as output) Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: sunxi: make use of raw_spinlock variantsJulia Cartwright2017-03-162-14/+14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sunxi pinctrl driver currently implement an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: sirf: atlas7: make use of raw_spinlock variantsJulia Cartwright2017-03-161-22/+22
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sirf atlas7 pinctrl drivers currently implement an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: amd: make use of raw_spinlock variantsJulia Cartwright2017-03-162-34/+34
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The amd pinctrl drivers currently implement an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: bcm: make use of raw_spinlock variantsJulia Cartwright2017-03-162-45/+45
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The bcm pinctrl drivers currently implement an irq_chip for handling interrupts; due to how irq_chip handling is done, it's necessary for the irq_chip methods to be invoked from hardirq context, even on a a real-time kernel. Because the spinlock_t type becomes a "sleeping" spinlock w/ RT kernels, it is not suitable to be used with irq_chips. A quick audit of the operations under the lock reveal that they do only minimal, bounded work, and are therefore safe to do under a raw spinlock. Signed-off-by: Julia Cartwright <julia@ni.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: qcom: qdf2xxx: add names to the gpiosTimur Tabi2017-03-161-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The sysfs and debugfs entries for pin control drivers work better when the individual pins are given real names, even if they are all just "gpio0", "gpio1", etc. Signed-off-by: Timur Tabi <timur@codeaurora.org> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: rockchip: Add input schmitt support for rk3328david.wu2017-03-141-0/+23
| | | | | | | | | | | | | | | | | | | | | | | | Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: rockchip：Add input schmitt supportdavid.wu2017-03-141-0/+73
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | To prevent external signal crosstalk, some pins need to enable input schmitt, like i2c pins, 32k-input pin and so on. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: sunxi: select GPIOLIBIcenowy Zheng2017-03-141-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Allwinner pin controllers are also GPIO controllers. Currently, if GPIOLIB is forgot to be chosen, the build of pinctrl-sunxi.c will fail for lacking a lot of gpiochip_* functions. Select GPIOLIB to ensure this driver can be built. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: sunxi: Add A64 R_PIO controller supportIcenowy Zheng2017-03-143-0/+130
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The A64 has a R_PIO pin controller, similar to the one found on the H3 SoC. Add support for the pins controlled by the R_PIO controller. Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: sunxi: refactor pinctrl choice selecting for ARM64Icenowy Zheng2017-03-141-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | ARM64 Allwinner SoCs used to have every pinctrl driver selected in ARCH_SUNXI. Change this to make their default value to (ARM64 && ARCH_SUNXI). Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz> Reviewed-by: Andre Przywara <andre.przywara@arm.com> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: Fix spelling typosAndy Shevchenko2017-03-143-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | Just fix spelling typos in comments. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: aspeed: Allow disabling Port D and Port E loopback modeRick Altherr2017-03-141-2/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Port D and port E GPIO loopback modes are commonly enabled via hardware straps for use with front-panel buttons. When the BMC is powered off or fails to boot, the front-panel buttons are directly connected to the host chipset via the loopback to allow direct power-on and reset control. Once the BMC has booted, the loopback mode must be disabled for the BMC to take over control of host power-on and reset. Disabling these loopback modes requires writing to the hardware strap register which violates the current design of assuming the system designer chose the strap settings for a specific reason and they should be treated as read-only. Only the two bits of the strap register related to these loopback modes are allowed to be written and comments have been added to explain why. Signed-off-by: Rick Altherr <raltherr@google.com> Acked-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Andrew Jeffery <andrew@aj.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: rockchip: Add rk3328 pinctrl supportdavid.wu2017-03-141-0/+70
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Note, the iomux of following pins are special, need to be recalculated specially. - gpio2_b4 - gpio2_b7 - gpio2_c7 Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: rockchip: Add mux recalculation supportdavid.wu2017-03-141-6/+35
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some pins are special at a bank so that add IOMUX_RECALCED type to indicate which iomux source of the bank need to be recalculated. If the mux recalculateed callback and IOMUX_RECALCED type were set, recalculate the pins' iomux by using mux recalculated data struct. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: rockchip: Add 3bit width mux supportdavid.wu2017-03-141-3/+17
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch supports 3bit width iomux type. Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: samsung: Remove unused local variableCharles Keepax2017-03-141-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The local variable drvdata is not used in samsung_gpio_set_direction. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * | | pinctrl: Fix trivial spelling typo in a commentCharles Keepax2017-03-061-1/+1
| |/ / | | | | | | | | | | | | Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | pinctrl: cherryview: Add a quirk to make Acer Chromebook keyboard work againMika Westerberg2017-04-111-2/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | After commit 47c950d10202 ("pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domain") the driver does not add all GPIOs to the irqdomain. The reason for that is that those GPIOs cannot generate IRQs at all, only GPEs (General Purpose Events). This causes Linux virtual IRQ numbering to change. However, it seems some CYAN Chromebooks, including Acer Chromebook hardcodes these Linux IRQ numbers in the ACPI tables of the machine. Since the numbering is different now, the IRQ meant for keyboard does not match the Linux virtual IRQ number anymore making the keyboard non-functional. Work this around by adding special quirk just for these machines where we add back all GPIOs to the irqdomain. Rest of the Cherryview/Braswell based machines will not be affected by the change. Link: https://bugzilla.kernel.org/show_bug.cgi?id=194945 Fixes: 47c950d10202 ("pinctrl: cherryview: Do not add all southwest and north GPIOs to IRQ domain") Reported-by: Adam S Levy <theadamlevy@gmail.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | pinctrl: samsung: Add missing part for PINCFG_TYPE_DRV of Exynos5433Chanwoo Choi2017-04-102-51/+40
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The commit 1259feddd0f8("pinctrl: samsung: Fix the width of PINCFG_TYPE_DRV bitfields for Exynos5433") already fixed the different width of PINCFG_TYPE_DRV from previous Exynos SoC. However wrong merge conflict resolution was chosen in commit 7f36f5d11cda ("Merge tag 'v4.10-rc6' into devel") effectively dropping the changes for PINCFG_TYPE_DRV. Re-do them here. The macro EXYNOS_PIN_BANK_EINTW is no longer used so remove it. Fixes: 7f36f5d11cda ("Merge tag 'v4.10-rc6' into devel") Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | pinctrl: core: Fix pinctrl_register_and_init() with pinctrl_enable()Tony Lindgren2017-04-075-40/+74
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Recent pinctrl changes to allow dynamic allocation of pins exposed one more issue with the pinctrl pins claimed early by the controller itself. This caused a regression for IMX6 pinctrl hogs. Before enabling the pin controller driver we need to wait until it has been properly initialized, then claim the hogs, and only then enable it. To fix the regression, split the code into pinctrl_claim_hogs() and pinctrl_enable(). And then let's require that pinctrl_enable() is always called by the pin controller driver when ready after calling pinctrl_register_and_init(). Depends-on: 950b0d91dc10 ("pinctrl: core: Fix regression caused by delayed work for hogs") Fixes: df61b366af26 ("pinctrl: core: Use delayed work for hogs") Fixes: e566fc11ea76 ("pinctrl: imx: use generic pinctrl helpers for managing groups") Cc: Haojian Zhuang <haojian.zhuang@linaro.org> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Mika Penttilä <mika.penttila@nextfour.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Nishanth Menon <nm@ti.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Gary Bisson <gary.bisson@boundarydevices.com> Tested-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | pinctrl: qcom: ipq4019: add missing pingroups for pins > 70Christian Lamparter2017-03-231-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds the missing PINGROUP for GPIO70-99. This fixes a crash that happens in pinctrl-msm, if any of the GPIO70-99 are accessed. Fixes: 5303f7827fcd41d ("pinctrl: qcom: ipq4019: set ngpios to correct value") Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | pinctrl: st: add irq_request/release_resources callbacksPatrice Chotard2017-03-231-6/+24
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When using GPIO as IRQ source, the GPIO must be configured in INPUT. Callbacks dedicated for this was missing in pinctrl-st driver. This fix the following kernel error when trying to lock a gpio as IRQ: [ 7.521095] gpio gpiochip7: (PIO11): gpiochip_lock_as_irq: tried to flag a GPIO set as output for IRQ [ 7.526018] gpio gpiochip7: (PIO11): unable to lock HW IRQ 6 for IRQ [ 7.529405] genirq: Failed to request resources for 0-0053 (irq 81) on irqchip GPIO Signed-off-by: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | pinctrl: qcom: Don't clear status bit on irq_unmaskBjorn Andersson2017-03-231-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Clearing the status bit on irq_unmask will discard any pending interrupt that did arrive after the irq_ack, i.e. while the IRQ handler function was executing. Fixes: f365be092572 ("pinctrl: Add Qualcomm TLMM driver") Cc: stable@vger.kernel.org Cc: Stephen Boyd <sboyd@codeaurora.org> Reported-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | pinctrl: samsung: Fix memory mapping codeAndrzej Hajda2017-03-231-3/+10
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Some pinctrls share memory regions, and devm_ioremap_resource does not allow to share resources, in opposition to devm_ioremap. This patch restores back usage of devm_ioremap function, but with proper error handling and logging. Fixes: baafaca ("pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()") Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | pinctrl: meson-gxbb: Fix typo in i2c ao groupsNeil Armstrong2017-03-231-2/+2
| | | | | | | | | | | | | | | Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | | pinctrl: ti: The IODelay driver is a DRA7xxx feature so depend on that SoCPeter Robinson2017-03-231-1/+1
| |/ |/| | | | | | | | | | | | | | | As the IODelay driver is a hardware feature of the DRA7xxx SoC depend on that SoC and compile test. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: uniphier: change pin names of aio/xirq for LD11Kunihiko Hayashi2017-03-061-6/+6
| | | | | | | | | | | | | | | | | | This patch changes pin names of AIO and XIRQ according to updated specification. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* | pinctrl: qcom: add get_direction functionTimur Tabi2017-03-061-0/+15
|/ | | | | | | | | | | | | | The get_direction callback function allows gpiolib to know the current direction (input vs output) for a given GPIO. This is particularly useful on ACPI systems, where the GPIOs are configured only by firmware (typically UEFI), so the only way to know the initial values to query the hardware directly. Without this function, gpiolib thinks that all GPIOs are configured for input. Signed-off-by: Timur Tabi <timur@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* scripts/spelling.txt: add "overrided" pattern and fix typo instancesMasahiro Yamada2017-02-271-1/+1
| | | | | | | | | | | Fix typos and add the following to the scripts/spelling.txt: overrided||overridden Link: http://lkml.kernel.org/r/1481573103-11329-22-git-send-email-yamada.masahiro@socionext.com Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Merge tag 'pinctrl-v4.11-1' of ↵Linus Torvalds2017-02-21101-3600/+11717
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "Pin control bulk changes for the v4.11 kernel cycle. Core changes: - Switch the generic pin config argument from 16 to 24 bits, only use 8 bits for the configuration type. We might need to encode more information about a certain setting than we need to encode different generic settings. - Add a cross-talk API to the pin control GPIO back-end, utilizing pinctrl_gpio_set_config() from GPIO drivers that want to set up a certain pin configuration in the back-end. This also includes the .set_config() refactoring of the GPIO chips, so that they pass a generic configuration for things like debouncing and single ended (typically open drain). This change has also been merged in an immutable branch to the GPIO tree. - Take hogs with a delayed work, so that we finalize probing a pin controller before trying to get any hogs. - For pin controllers putting all group and function definitions into the device tree, we now have generic code to deal with this and it is used in two drivers so far. - Simplifications of the pin request conflict check. - Make dt_free_map() optional. Updates to drivers: - pinctrl-single now use the generic helpers to generate dynamic group and function tables from the device tree. - Texas Instruments IOdelay configuration driver add-on to pinctrl-single. - i.MX: use radix trees to store groups and functions, use the new generic group and function helpers to manage them. - Intel: add support for hardware debouncing and 1K pull-down. New subdriver for the Gemini Lake SoC. - Renesas SH-PFC: drive strength and bias support, CAN bus muxing, MSIOF, SDHI, HSCIF for r8a7796. Gyro-ADC supporton r8a7791. - Aspeed: use syscon cross-dependencies to set up related bits in the LPC host controller and display controller. - Aspeed: finalize G4 and G5 support. Fix mux configuration on GPIOs. Add banks Y, Z, AA, AB and AC. - AMD: support additional GPIO. - STM32: set this controller to strict muxing mode. STM32H743 MCU support. - Allwinner sunxi: deep simplifications on how to support subvariants of SoCs without adding to much SoC-specific data for each subvariant, especially for sun5i variants. New driver for V3s SoCs. New driver for the H5 SoC. Support A31/A31s variants with the new variant framework. - Mvebu: simplifications to use a MMIO and regmap abstraction. New subdrivers for the 98DX3236, 98DX5241 SoCs. - Samsung Exynos: delete Exynos4415 support. Add crosstalk to the SoC driver to access regmaps. Add infrastructure for pin-bank retention control. Clean out the pin retention control from arch/arm/mach-exynos and arch/arm/mach-s5p and put it properly in the Samsung pin control driver(s). - Meson: add HDMI HPD/DDC pins. Add pwm_ao_b pin. - Qualcomm: use raw spinlock variants: this makes the qualcomm driver realtime-safe" * tag 'pinctrl-v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (111 commits) pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data() pinctrl: intel: unlock on error in intel_config_set_pull() pinctrl: berlin: make bool drivers explicitly non-modular pinctrl: spear: make bool drivers explicitly non-modular pinctrl: mvebu: make bool drivers explicitly non-modular pinctrl: sunxi: make sun5i explicitly non-modular pinctrl: sunxi: Remove stray printk call in sun5i driver's probe function pinctrl: samsung: mark PM functions as __maybe_unused pinctrl: sunxi: Remove redundant A31s pinctrl driver pinctrl: sunxi: Support A31/A31s with pinctrl variants pinctrl: Amend bindings for STM32 pinctrl pinctrl: Add STM32 pinctrl driver DT bindings pinctrl: stm32: Add STM32H743 MCU support include: dt-bindings: Add STM32H7 pinctrl DT defines gpio: aspeed: Remove dependence on GPIOF_* macros pinctrl: stm32: fix bad location of gpiochip_lock_as_irq drivers: pinctrl: add driver for Allwinner H5 SoC pinctrl: intel: Add Intel Gemini Lake pin controller support pinctrl: intel: Add support for 1k additional pull-down pinctrl: intel: Add support for hardware debouncer ...
| * pinctrl: samsung: Fix return value check in samsung_pinctrl_get_soc_data()Wei Yongjun2017-02-131-3/+2
| | | | | | | | | | | | | | | | | | | | In case of error, the function devm_ioremap() returns NULL pointer not ERR_PTR(). Fix by using devm_ioremap_resource instead of devm_ioremap. Fixes: 8b1bd11c1f8f ("pinctrl: samsung: Add the support the multiple IORESOURCE_MEM for one pin-bank") Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * pinctrl: intel: unlock on error in intel_config_set_pull()Dan Carpenter2017-02-131-2/+4
| | | | | | | | | | | | | | | | We need to unlock before returning -EINVAL on this error path. Fixes: 04cc058f0c52 ("pinctrl: intel: Add support for 1k additional pull-down") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * pinctrl: berlin: make bool drivers explicitly non-modularPaul Gortmaker2017-02-134-28/+8
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | None of the Kconfigs for any of these drivers are tristate, meaning that they currently are not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: "Antoine Ténart" <antoine.tenart@free-electrons.com> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Hongzhou Yang <hongzhou.yang@mediatek.com> Cc: Thomas Hebb <tommyhebb@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * pinctrl: spear: make bool drivers explicitly non-modularPaul Gortmaker2017-02-136-66/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | None of the Kconfigs for any of these drivers are tristate, meaning that they currently are not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the drivers there is no doubt they are builtin-only. All drivers get the exact same change, so they are handled in batch. Changes are (1) use init.h header in place of module.h header, (2) delete module_exit related code, (3) delete MODULE_DEVICE_TABLE, and (4) delete MODULE_LICENCE/MODULE_AUTHOR and associated tags. None of these drivers were using module_init() so we don't have to worry about the init ordering getting changed with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE etc. tags since all that information is already contained at the top of each file in the comments. Cc: spear-devel@list.st.com Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * pinctrl: mvebu: make bool drivers explicitly non-modularPaul Gortmaker2017-02-139-65/+9
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | None of the Kconfigs for any of these drivers are tristate, meaning that they currently are not being built as a module by anyone. Lets remove the modular code that is essentially orphaned, so that when reading the drivers there is no doubt they are builtin-only. All drivers get the exact same change, so they are handled in batch. Changes are (1) use builtin_platform_driver, (2) dont use module.h (3) delete module_exit related code, (4) delete MODULE_DEVICE_TABLE, and (5) delete MODULE_LICENCE/MODULE_AUTHOR and associated tags. For the dove driver we explicitly disallow a driver unbind, since that doesn't have a sensible use case anyway, and it allows us to drop the ".remove" code for non-modular drivers. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. We deleted the MODULE_LICENSE etc. tags since all that information is already contained at the top of the file in the comments. Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| * pinctrl: sunxi: make sun5i explicitly non-modularPaul Gortmaker2017-02-061-8/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | We had all these corrected in commit 0c8c6ba00cbf ("pinctrl: sunxi: make bool drivers explicitly non-modular") but this new one recently crept in. The Kconfig currently controlling compilation of this code is: drivers/pinctrl/sunxi/Kconfig:config PINCTRL_SUN5I drivers/pinctrl/sunxi/Kconfig: def_bool MACH_SUN5I ...meaning that it currently is not being built as a module by anyone. Lets remove the couple traces of modular infrastructure use, so that when reading the driver there is no doubt it is builtin-only. Since module_platform_driver() uses the same init level priority as builtin_platform_driver() the init ordering remains unchanged with this commit. Also note that MODULE_DEVICE_TABLE is a no-op for non-modular code. We also delete the MODULE_LICENSE tag etc. since all that information is already contained at the top of the file in the comments. Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: linux-gpio@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit (git 2.34.1) at 2025-02-25 01:38:32 +0000