aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/scsi/bnx2i/bnx2i_iscsi.c
Commit message (Collapse)AuthorAgeFilesLines
* scsi: iscsi: Fix session removal on shutdownMike Christie2022-06-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | When the system is shutting down, iscsid is not running so we will not get a response to the ISCSI_ERR_INVALID_HOST error event. The system shutdown will then hang waiting on userspace to remove the session. This has libiscsi force the destruction of the session from the kernel when iscsi_host_remove() is called from a driver's shutdown callout. This fixes a regression added in qedi boot with commit d1f2ce77638d ("scsi: qedi: Fix host removal with running sessions") which made qedi use the common session removal function that waits on userspace instead of rolling its own kernel based removal. Link: https://lore.kernel.org/r/20220616222738.5722-7-michael.christie@oracle.com Fixes: d1f2ce77638d ("scsi: qedi: Fix host removal with running sessions") Tested-by: Nilesh Javali <njavali@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: iscsi: Merge suspend fieldsMike Christie2022-04-111-1/+1
| | | | | | | | | | | Move the tx and rx suspend fields into one flags field. Link: https://lore.kernel.org/r/20220408001314.5014-8-michael.christie@oracle.com Tested-by: Manish Rangankar <mrangankar@marvell.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Chris Leech <cleech@redhat.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: iscsi: Stop using the SCSI pointerBart Van Assche2022-02-221-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Instead of storing the iSCSI task pointer and the session age in the SCSI pointer, use command-private variables. This patch prepares for removal of the SCSI pointer from struct scsi_cmnd. The list of iSCSI drivers has been obtained as follows: $ git grep -lw iscsi_host_alloc drivers/infiniband/ulp/iser/iscsi_iser.c drivers/scsi/be2iscsi/be_main.c drivers/scsi/bnx2i/bnx2i_iscsi.c drivers/scsi/cxgbi/libcxgbi.c drivers/scsi/iscsi_tcp.c drivers/scsi/libiscsi.c drivers/scsi/qedi/qedi_main.c drivers/scsi/qla4xxx/ql4_os.c include/scsi/libiscsi.h Note: it is not clear to me how the qla4xxx driver can work without this patch since it uses the scsi_cmnd::SCp.ptr member for two different purposes: - The qla4xxx driver uses this member to store a struct srb pointer. - libiscsi uses this member to store a struct iscsi_task pointer. Reviewed-by: Lee Duncan <lduncan@suse.com> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Cc: Chris Leech <cleech@redhat.com> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Nilesh Javali <njavali@marvell.com> Cc: Manish Rangankar <mrangankar@marvell.com> Cc: Karen Xie <kxie@chelsio.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Signed-off-by: Bart Van Assche <bvanassche@acm.org> iscsi Link: https://lore.kernel.org/r/20220218195117.25689-26-bvanassche@acm.org Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: bnx2i: Switch to attribute groupsBart Van Assche2021-10-161-1/+1
| | | | | | | | | struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-17-bvanassche@acm.org Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: iscsi: Fix shost->max_id useMike Christie2021-06-021-1/+1
| | | | | | | | | | | | | The iscsi offload drivers are setting the shost->max_id to the max number of sessions they support. The problem is that max_id is not the max number of targets but the highest identifier the targets can have. To use it to limit the number of targets we need to set it to max sessions - 1, or we can end up with a session we might not have preallocated resources for. Link: https://lore.kernel.org/r/20210525181821.7617-15-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: iscsi: Rel ref after iscsi_lookup_endpoint()Mike Christie2021-06-021-7/+16
| | | | | | | | | | | Subsequent commits allow the kernel to do ep_disconnect. In that case we will have to get a proper refcount on the ep so one thread does not delete it from under another. Link: https://lore.kernel.org/r/20210525181821.7617-7-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: iscsi: Drop suspend calls from ep_disconnectMike Christie2021-06-021-5/+1
| | | | | | | | | | libiscsi will now suspend the send/tx queue for the drivers so we can drop it from the drivers ep_disconnect. Link: https://lore.kernel.org/r/20210525181821.7617-4-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: iscsi: Stop queueing during ep_disconnectMike Christie2021-06-021-0/+1
| | | | | | | | | | | | | | | | | During ep_disconnect we have been doing iscsi_suspend_tx/queue to block new I/O but every driver except cxgbi and iscsi_tcp can still get I/O from __iscsi_conn_send_pdu() if we haven't called iscsi_conn_failure() before ep_disconnect. This could happen if we were terminating the session, and the logout timed out before it was even sent to libiscsi. Fix the issue by adding a helper which reverses the bind_conn call that allows new I/O to be queued. Drivers implementing ep_disconnect can use this to make sure new I/O is not queued to them when handling the disconnect. Link: https://lore.kernel.org/r/20210525181821.7617-3-michael.christie@oracle.com Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: libiscsi: Fix iscsi_task use after free()Mike Christie2021-02-081-2/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The following bug was reported and debugged by wubo40@huawei.com: When testing kernel 4.18 version, NULL pointer dereference problem occurs in iscsi_eh_cmd_timed_out() function. I think this bug in the upstream is still exists. The analysis reasons are as follows: 1) For some reason, I/O command did not complete within the timeout period. The block layer timer works, call scsi_times_out() to handle I/O timeout logic. At the same time the command just completes. 2) scsi_times_out() call iscsi_eh_cmd_timed_out() to process timeout logic. Although there is an NULL judgment for the task, the task has not been released yet now. 3) iscsi_complete_task() calls __iscsi_put_task(). The task reference count reaches zero, the conditions for free task is met, then iscsi_free_task() frees the task, and sets sc->SCp.ptr = NULL. After iscsi_eh_cmd_timed_out() passes the task judgment check, there can still be NULL dereference scenarios. CPU0 CPU3 |- scsi_times_out() |- iscsi_complete_task() | | |- iscsi_eh_cmd_timed_out() |- __iscsi_put_task() | | |- task=sc->SCp.ptr, task is not NUL, check passed |- iscsi_free_task(task) | | | |-> sc->SCp.ptr = NULL | | |- task is NULL now, NULL pointer dereference | | | \|/ \|/ Calltrace: [380751.840862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000138 [380751.843709] PGD 0 P4D 0 [380751.844770] Oops: 0000 [#1] SMP PTI [380751.846283] CPU: 0 PID: 403 Comm: kworker/0:1H Kdump: loaded Tainted: G [380751.851467] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996) [380751.856521] Workqueue: kblockd blk_mq_timeout_work [380751.858527] RIP: 0010:iscsi_eh_cmd_timed_out+0x15e/0x2e0 [libiscsi] [380751.861129] Code: 83 ea 01 48 8d 74 d0 08 48 8b 10 48 8b 4a 50 48 85 c9 74 2c 48 39 d5 74 [380751.868811] RSP: 0018:ffffc1e280a5fd58 EFLAGS: 00010246 [380751.870978] RAX: ffff9fd1e84e15e0 RBX: ffff9fd1e84e6dd0 RCX: 0000000116acc580 [380751.873791] RDX: ffff9fd1f97a9400 RSI: ffff9fd1e84e1800 RDI: ffff9fd1e4d6d420 [380751.876059] RBP: ffff9fd1e4d49000 R08: 0000000116acc580 R09: 0000000116acc580 [380751.878284] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9fd1e6e931e8 [380751.880500] R13: ffff9fd1e84e6ee0 R14: 0000000000000010 R15: 0000000000000003 [380751.882687] FS: 0000000000000000(0000) GS:ffff9fd1fac00000(0000) knlGS:0000000000000000 [380751.885236] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [380751.887059] CR2: 0000000000000138 CR3: 000000011860a001 CR4: 00000000003606f0 [380751.889308] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [380751.891523] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [380751.893738] Call Trace: [380751.894639] scsi_times_out+0x60/0x1c0 [380751.895861] blk_mq_check_expired+0x144/0x200 [380751.897302] ? __switch_to_asm+0x35/0x70 [380751.898551] blk_mq_queue_tag_busy_iter+0x195/0x2e0 [380751.900091] ? __blk_mq_requeue_request+0x100/0x100 [380751.901611] ? __switch_to_asm+0x41/0x70 [380751.902853] ? __blk_mq_requeue_request+0x100/0x100 [380751.904398] blk_mq_timeout_work+0x54/0x130 [380751.905740] process_one_work+0x195/0x390 [380751.907228] worker_thread+0x30/0x390 [380751.908713] ? process_one_work+0x390/0x390 [380751.910350] kthread+0x10d/0x130 [380751.911470] ? kthread_flush_work_fn+0x10/0x10 [380751.913007] ret_from_fork+0x35/0x40 crash> dis -l iscsi_eh_cmd_timed_out+0x15e xxxxx/drivers/scsi/libiscsi.c: 2062 1970 enum blk_eh_timer_return iscsi_eh_cmd_timed_out(struct scsi_cmnd *sc) { ... 1984 spin_lock_bh(&session->frwd_lock); 1985 task = (struct iscsi_task *)sc->SCp.ptr; 1986 if (!task) { 1987 /* 1988 * Raced with completion. Blk layer has taken ownership 1989 * so let timeout code complete it now. 1990 */ 1991 rc = BLK_EH_DONE; 1992 goto done; 1993 } ... 2052 for (i = 0; i < conn->session->cmds_max; i++) { 2053 running_task = conn->session->cmds[i]; 2054 if (!running_task->sc || running_task == task || 2055 running_task->state != ISCSI_TASK_RUNNING) 2056 continue; 2057 2058 /* 2059 * Only check if cmds started before this one have made 2060 * progress, or this could never fail 2061 */ 2062 if (time_after(running_task->sc->jiffies_at_alloc, 2063 task->sc->jiffies_at_alloc)) <--- 2064 continue; 2065 ... } carsh> struct scsi_cmnd ffff9fd1e6e931e8 struct scsi_cmnd { ... SCp = { ptr = 0x0, <--- iscsi_task this_residual = 0, ... }, } To prevent this, we take a ref to the cmd under the back (completion) lock so if the completion side were to call iscsi_complete_task() on the task while the timer/eh paths are not holding the back_lock it will not be freed from under us. Note that this requires the previous patch, "scsi: libiscsi: Drop taskqueuelock" because bnx2i sleeps in its cleanup_task callout if the cmd is aborted. If the EH/timer and completion path are racing we don't know which path will do the last put. The previous patch moved the operations we needed to do under the forward lock to cleanup_queued_task. Once that has run we can drop the forward lock for the cmd and bnx2i no longer has to worry about if the EH, timer or completion path did the ast put and if the forward lock is held or not since it won't be. Link: https://lore.kernel.org/r/20210207044608.27585-4-michael.christie@oracle.com Reported-by: Wu Bo <wubo40@huawei.com> Reviewed-by: Lee Duncan <lduncan@suse.com> Signed-off-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: bnx2i: Add parameter description and rename anotherLee Jones2020-07-241-1/+2
| | | | | | | | | | | | | | | Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_iscsi.c:1288: warning: Function parameter or member 'cmds_max' not described in 'bnx2i_session_create' drivers/scsi/bnx2i/bnx2i_iscsi.c:2176: warning: Function parameter or member 'params' not described in 'bnx2i_nl_set_path' drivers/scsi/bnx2i/bnx2i_iscsi.c:2176: warning: Excess function parameter 'buf' description in 'bnx2i_nl_set_path' Link: https://lore.kernel.org/r/20200723122446.1329773-40-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: bnx2i: Add, remove and edit some function parameter descriptionsLee Jones2020-07-241-9/+7
| | | | | | | | | | | | | | | | | | | | | | | | Fixes the following W=1 kernel build warning(s): drivers/scsi/bnx2i/bnx2i_iscsi.c:241: warning: Function parameter or member 'bnx2i_conn' not described in 'bnx2i_bind_conn_to_iscsi_cid' drivers/scsi/bnx2i/bnx2i_iscsi.c:241: warning: Excess function parameter 'conn' description in 'bnx2i_bind_conn_to_iscsi_cid' drivers/scsi/bnx2i/bnx2i_iscsi.c:470: warning: Excess function parameter 'cmd' description in 'bnx2i_destroy_cmd_pool' drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Function parameter or member 'cls_session' not described in 'bnx2i_drop_session' drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Excess function parameter 'hba' description in 'bnx2i_drop_session' drivers/scsi/bnx2i/bnx2i_iscsi.c:595: warning: Excess function parameter 'session' description in 'bnx2i_drop_session' drivers/scsi/bnx2i/bnx2i_iscsi.c:1290: warning: Function parameter or member 'ep' not described in 'bnx2i_session_create' drivers/scsi/bnx2i/bnx2i_iscsi.c:1979: warning: Function parameter or member 'bnx2i_ep' not described in 'bnx2i_ep_tcp_conn_active' drivers/scsi/bnx2i/bnx2i_iscsi.c:1979: warning: Excess function parameter 'ep' description in 'bnx2i_ep_tcp_conn_active' drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Function parameter or member 'shost' not described in 'bnx2i_nl_set_path' drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Function parameter or member 'params' not described in 'bnx2i_nl_set_path' drivers/scsi/bnx2i/bnx2i_iscsi.c:2178: warning: Excess function parameter 'buf' description in 'bnx2i_nl_set_path' Link: https://lore.kernel.org/r/20200723122446.1329773-30-lee.jones@linaro.org Cc: QLogic-Storage-Upstream@qlogic.com Cc: Anil Veerabhadrappa <anilgv@broadcom.com> Cc: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: bnx2i: fix potential use after freePan Bian2019-11-191-1/+1
| | | | | | | | | | | The member hba->pcidev may be used after its reference is dropped. Move the put function to where it is never used to avoid potential use after free issues. Fixes: a77171806515 ("[SCSI] bnx2i: Removed the reference to the netdev->base_addr") Link: https://lore.kernel.org/r/1573043541-19126-1-git-send-email-bianpan2016@163.com Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: bnx2i: fix indentation issue, remove a tabColin Ian King2019-01-081-1/+1
| | | | | | | | | The return statement is indented incorrectly, fix this by removing a single tab. Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: flip the default on use_clusteringChristoph Hellwig2018-12-181-1/+0
| | | | | | | | | | Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: bnx2i: Convert timers to use timer_setup()Kees Cook2017-10-271-11/+4
| | | | | | | | | | | | | | | | In preparation for unconditionally passing the struct timer_list pointer to all timer callbacks, switch to using the new timer_setup() and from_timer() to pass the timer pointer explicitly. There was a seemingly missing call to initialize the timer in one handler, so this was added to remove the open-coded initialization. Cc: QLogic-Storage-Upstream@qlogic.com Cc: "James E.J. Bottomley" <jejb@linux.vnet.ibm.com> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: linux-scsi@vger.kernel.org Signed-off-by: Kees Cook <keescook@chromium.org> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: bnx2i: missing error code in bnx2i_ep_connect()Dan Carpenter2017-06-261-1/+2
| | | | | | | | | | | If bnx2i_map_ep_dbell_regs() then we accidentally return NULL instead of an error pointer. It results in a NULL dereference in iscsi_if_ep_connect(). Fixes: cf4e6363859d ("[SCSI] bnx2i: Add bnx2i iSCSI driver.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* scsi: remove eh_timed_out methods in the transport templateChristoph Hellwig2017-02-061-0/+1
| | | | | | | | | | | | | Instead define the timeout behavior purely based on the host_template eh_timed_out method and wire up the existing transport implementations in the host templates. This also clears up the confusion that the transport template method overrides the host template one, so some drivers have to re-override the transport template one. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Reviewed-by: Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* bnx2i: silence uninitialized variable warningsDan Carpenter2016-04-251-2/+2
| | | | | | | | | | Presumably it isn't possible to have empty lists here, but my static checker doesn't know that and complains that "ep" can be used uninitialized. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
* bnx2i: Fix call trace while device resetNilesh Javali2015-06-021-0/+2
| | | | | | | | | | | | The driver waits for command completion event while cleanup of task within the frwd lock and back locks. The frwd lock was still held which caused the call trace while issuing a device reset. Release the frwd lock along with the back lock to avoid waiting in the lock context. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* bnx2i: Fixed firmware assert, during target logout.Tej Parkash2015-06-021-1/+2
| | | | | | | | | | | Fix the firmware assert, during target logout in case driver received FIN from target before waiting for asyncronous response. Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Odin.com>
* scsi: drop reason argument from ->change_queue_depthChristoph Hellwig2014-11-241-1/+1
| | | | | | | | | | | Drop the now unused reason argument from the ->change_queue_depth method. Also add a return value to scsi_adjust_queue_depth, and rename it to scsi_change_queue_depth now that it can be used as the default ->change_queue_depth implementation. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de>
* scsi: avoid ->change_queue_depth indirection for queue full trackingChristoph Hellwig2014-11-241-0/+1
| | | | | | | | | | | | | | | | | All drivers use the implementation for ramping the queue up and down, so instead of overloading the change_queue_depth method call the implementation diretly if the driver opts into it by setting the track_queue_depth flag in the host template. Note that a few drivers validated the new queue depth in their change_queue_depth method, but as we never go over the queue depth set during slave_configure or the sysfs file this isn't nessecary and can safely be removed. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Reviewed-by: Hannes Reinecke <hare@suse.de> Reviewed-by: Venkatesh Srinivas <venkateshs@google.com>
* bnx2i: Make boot_nic entry visible in the sysfs session objectsTej Parkash2014-09-161-0/+3
| | | | | | | | Signed-off-by: Tej Parkash <tej.parkash@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* bnx2i: Rebranding bnx2i driverVikas Chaudhary2014-07-251-3/+5
| | | | | | | | | QLogic has acquired the NetXtremeII products and drivers from Broadcom. This patch re-brands bnx2i driver as a QLogic driver Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* bnx2i, be2iscsi: fix custom stats lengthMike Christie2014-07-251-4/+3
| | | | | | | | | | | | | | The custom stats is an array with custom_length indicating the length of the array. This patch fixes bnx2i and be2iscsi's setting of the custom stats length. They both just have the one, eh_abort_cnt, so that should be in the first entry of the custom array and custom_length should then be one. Reported-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Acked-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
* Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds2014-04-011-4/+4
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pull first round of SCSI updates from James Bottomley: "This patch consists of the usual driver updates (megaraid_sas, scsi_debug, qla2xxx, qla4xxx, lpfc, bnx2fc, be2iscsi, hpsa, ipr) plus an assortment of minor fixes and the first precursors of SCSI-MQ (the code path simplifications) and the bug fix for the USB oops on remove (which involves an infrastructure change, so is sent via the main tree with a delayed backport after a cycle in which it is shown to introduce no new bugs)" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (196 commits) [SCSI] sd: Quiesce mode sense error messages [SCSI] add support for per-host cmd pools [SCSI] simplify command allocation and freeing a bit [SCSI] megaraid: simplify internal command handling [SCSI] ses: Use vpd information from scsi_device [SCSI] Add EVPD page 0x83 and 0x80 to sysfs [SCSI] Return VPD page length in scsi_vpd_inquiry() [SCSI] scsi_sysfs: Implement 'is_visible' callback [SCSI] hpsa: update driver version to 3.4.4-1 [SCSI] hpsa: fix bad endif placement in RAID 5 mapper code [SCSI] qla2xxx: Fix build errors related to invalid print fields on some architectures. [SCSI] bfa: Replace large udelay() with mdelay() [SCSI] vmw_pvscsi: Some improvements in pvscsi driver. [SCSI] vmw_pvscsi: Add support for I/O requests coalescing. [SCSI] vmw_pvscsi: Fix pvscsi_abort() function. [SCSI] remove deprecated IRQF_DISABLED from SCSI [SCSI] bfa: Updating Maintainers email ids [SCSI] ipr: Add new CCIN definition for Grand Canyon support [SCSI] ipr: Format HCAM overlay ID 0x21 [SCSI] ipr: Use pci_enable_msi_range() and pci_enable_msix_range() ...
| * [SCSI] libiscsi: Reduce locking contention in fast pathShlomo Pongratz2014-03-151-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Replace the session lock with two locks, a forward lock and a backwards lock named frwd_lock and back_lock respectively. The forward lock protects resources that change while sending a request to the target, such as cmdsn, queued_cmdsn, and allocating task from the commands' pool with kfifo_out. The backward lock protects resources that change while processing a response or in error path, such as cmdsn_exp, cmdsn_max, and returning tasks to the commands' pool with kfifo_in. Under a steady state fast-path situation, that is when one or more processes/threads submit IO to an iscsi device and a single kernel upcall (e.g softirq) is dealing with processing of responses without errors, this patch eliminates the contention between the queuecommand()/request response/scsi_done() flows associated with iscsi sessions. Between the forward and the backward locks exists a strict locking hierarchy. The mutual exclusion zone protected by the forward lock can enclose the mutual exclusion zone protected by the backward lock but not vice versa. For example, in iscsi_conn_teardown or in iscsi_xmit_data when there is a failure and __iscsi_put_task is called, the backward lock is taken while the forward lock is still taken. On the other hand, if in the RX path a nop is to be sent, for example in iscsi_handle_reject or __iscsi_complete_pdu than the forward lock is released and the backward lock is taken for the duration of iscsi_send_nopout, later the backward lock is released and the forward lock is retaken. libiscsi_tcp uses two kernel fifos the r2t pool and the r2t queue. The insertion and deletion from these queues didn't corespond to the assumption taken by the new forward/backwards session locking paradigm. That is, in iscsi_tcp_clenup_task which belongs to the RX (backwards) path, r2t is taken out from r2t queue and inserted to the r2t pool. In iscsi_tcp_get_curr_r2t which belong to the TX (forward) path, r2t is also inserted to the r2t pool and another r2t is pulled from r2t queue. Only in iscsi_tcp_r2t_rsp which is called in the RX path but can requeue to the TX path, r2t is taken from the r2t pool and inserted to the r2t queue. In order to cope with this situation, two spin locks were added, pool2queue and queue2pool. The former protects extracting from the r2t pool and inserting to the r2t queue, and the later protects the extracing from the r2t queue and inserting to the r2t pool. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> [minor fix up to apply cleanly and compile fix] Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | cnic,bnx2i,bnx2fc: Fix inconsistent use of page sizeMichael Chan2014-03-181-11/+12
|/ | | | | | | | | | | | | | The bnx2/bnx2x rings are made up of linked pages. However there is an upper limit on the page size as some the page size settings are 16-bit in the hardware/firmware interface. In the current code, some parts use BNX2_PAGE_SIZE which has a 16K upper limit and some parts use PAGE_SIZE. On archs with >= 64K PAGE_SIZE, it generates some compile warnings. Define a new CNIC_PAGE_SZIE which has an upper limit of 16K and use it consistently in all relevant parts. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* treewide: Fix common typo in "identify"Maxime Jayat2013-10-141-7/+7
| | | | | | | | Correct common misspelling of "identify" as "indentify" throughout the kernel Signed-off-by: Maxime Jayat <maxime@artisandeveloppeur.fr> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
* [SCSI] bnx2i: Update version and copyright year 2013Eddie Wai2013-08-231-1/+1
| | | | | | | | Old version: 2.7.2.2 New version: 2.7.6.2 Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bnx2i: removed the individual PCI DEVICE ID checkingEddie Wai2012-11-271-1/+1
| | | | | | | | | | | | Removed the individual PCI DEVICE ID checking inside bnx2i. The device type can easily be read from the corresponding cnic->flags. This will free bnx2i from having to get updated for every new device ID that gets added. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Acked-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller2012-07-191-5/+5
|\ | | | | | | | | Conflicts: drivers/net/ethernet/intel/ixgbevf/ixgbevf_main.c
| * [SCSI] bnx2i: Removed the reference to the netdev->base_addrEddie Wai2012-07-081-5/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The netdev->base_addr parameter has been deprecated in the L2 bnx2 driver. This is used by bnx2i for the BARn iomapping. This patch will directly reference the pci_resource_start instead of using the deprecated netdev->base_addr. This patch is actually a critical bug fix as the 1G bnx2 driver no longer supports the netdev->base_addr in the current kernel of the scsi tree. This means that Broadcom's 1G Linux iSCSI offload solution would not work at all without this patch. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | bnx2x, bnx2fc, bnx2i, cnic: Add statistics support and FCoE capabilities ↵Barak Witkowski2012-06-271-0/+11
|/ | | | | | | | | | | | | | | | advertisement 1. When FCoE offload driver is registered, copy its capabilities to the chip scratchpad. 2. Copy FCoE/iSCSI MAC addresses in aligned manner to chip scratchpad. 3. Add FCoE/iSCSI statistics collection support Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
* [SCSI] bnx2i: Updated version and copyright yearEddie Wai2012-05-101-1/+1
| | | | | | | | | Old version: 2.7.0.3 New version: 2.7.2.2 Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bnx2i: Added the setting of target can_queue via target_allocEddie Wai2012-05-101-0/+1
| | | | | | | | | | | | This will set the target can_queue limit to the number of preallocated session tasks set during creation. "Could not send nopout" messages were observed without this when the iSCSI connection experiences dropped frames under heavy I/O stress. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* switch ->is_visible() to returning umode_tAl Viro2012-01-031-1/+1
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [SCSI] iscsi class: sysfs group is_visible callout for iscsi host attrsMike Christie2011-08-271-2/+9
| | | | | | | | | | | The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and driver's host attrs to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] iscsi class: sysfs group is_visible callout for session attrsMike Christie2011-08-271-14/+20
| | | | | | | | | | | The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and driver's session attrs to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] iscsi cls: sysfs group is_visible callout for conn attrsMike Christie2011-08-271-11/+26
| | | | | | | | | | | The iscsi class currently does not support writable sysfs attrs for LLD sysfs settings. This patch converts the iscsi class and drivers to use the attribute container sysfs group and the sysfs group's is_visible callout to be able to support readable or writable sysfs attrs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* Merge branch 'for-next' of ↵Linus Torvalds2011-07-271-1/+1
|\ | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Convert to DIV_ROUND_UP_SECTOR_T usage for sectors / dev_max_sectors kernel.h: Add DIV_ROUND_UP_ULL and DIV_ROUND_UP_SECTOR_T macro usage iscsi-target: Add iSCSI fabric support for target v4.1 iscsi: Add Serial Number Arithmetic LT and GT into iscsi_proto.h iscsi: Use struct scsi_lun in iscsi structs instead of u8[8] iscsi: Resolve iscsi_proto.h naming conflicts with drivers/target/iscsi
| * iscsi: Resolve iscsi_proto.h naming conflicts with drivers/target/iscsiNicholas Bellinger2011-07-251-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch renames the following iscsi_proto.h structures to avoid namespace issues with drivers/target/iscsi/iscsi_target_core.h: *) struct iscsi_cmd -> struct iscsi_scsi_req *) struct iscsi_cmd_rsp -> struct iscsi_scsi_rsp *) struct iscsi_login -> struct iscsi_login_req This patch includes useful ISCSI_FLAG_LOGIN_[CURRENT,NEXT]_STAGE*, and ISCSI_FLAG_SNACK_TYPE_* definitions used by iscsi_target_mod, and fixes the incorrect definition of struct iscsi_snack to following RFC-3720 Section 10.16. SNACK Request. Also, this patch updates libiscsi, iSER, be2iscsi, and bn2xi to use the updated structure definitions in a handful of locations. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
* | [SCSI] bnx2i: Updated copyright and bump versionEddie Wai2011-06-291-1/+1
| | | | | | | | | | | | | | Bumped version from 2.6.2.3 to 2.7.0.3 Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* | [SCSI] bnx2i: Added the use of kthreads to handle SCSI cmd completionEddie Wai2011-06-291-4/+32
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch breaks the SCSI cmd completion into two parts: 1. The bh will allocate and queued work to the cmd specific CPU IO completion kthread. The CPU for the cmd is from the sc->request->cpu. 2. The CPU specific IO completion kthread will call the scsi_cmd_resp routine to do the actual cmd completion. In the normal case, these IO completion kthreads should complete before the blk IO times out at 60s. However, in the case when these kthreads are blocked for whatever reason and exceeded the timeout, the call to conn_destroy will have to iterate and exhaust all related work in the percpu work list for all online CPUs. This will guarantee the protection of the work->session and conn pointers before they get freed. Also modified the event coalescing formula to have at least the event_coal_min outstanding cmds in the pipeline so the SCSI producer would not get underrun. Also changed the following SCSI parameters: - can_queue from 1024 to 2048 - cmds_per_lun from 24 to 128 Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Acked-by: Benjamin Li <benli@broadcom.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
* [SCSI] bnx2i: Optimized the iSCSI offload performanceEddie Wai2011-05-241-1/+7
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Modified the event coalescing code for iSCSI offload to combat both corner cases and optimize performance as follows: 1. Added mechanism to loop back a second time to process any leftover CQEs that was generated by the hardware during the time the driver is busy processing previous CQEs in the bh. This not only helps the performance but also fixes the corner case when no more CQEs are being generated in the pipeline; so those leftover CQEs will get a a chance to be processed. 2. Added ARM_CQE_FP to distinguish between fast path arming versus slow path arming. This change will guarantee that the CQEs will always get a chance to be re-armed during fast path completions. 3. Removed the inline event coalescing division for perf optimization. Also fixed a division-by-zero error when the event_coal_div module param was set to 0. 4. Changed the default SQ WQEs size from 256 to 128 to match chip default. 5. Changed the cmd_per_lun from 32 to 24. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] bnx2i: Updated the connection shutdown/cleanup timeoutEddie Wai2011-05-241-1/+1
| | | | | | | | | | | Modified the 10s wait time for inflight offload connections to advance to the next state to 2s based on test result. Modified the 20s shutdown timeout to 30s based on test result. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@kernel.org Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] bnx2i: Fixed packet error created when the sq_size is set to 16Eddie Wai2011-05-241-0/+3
| | | | | | | | | | | | | | The number of chip's internal command cell, which is use to generate SCSI cmd packets to the target, was not initialized correctly by the driver when the sq_size is changed from the default 128. This, in turn, will create a problem where the chip's transmit pipe will erroneously reuse an old command cell that is no longer valid. The fix is to correctly initialize the chip's command cell upon setup. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Cc: stable@kernel.org Signed-off-by: James Bottomley <jbottomley@parallels.com>
* [SCSI] bnx2i: fix null ptr ref in conn get paramMike Christie2011-02-241-23/+22
| | | | | | | | | | | | | | | | | | bnx2i has some checks to try and make sure the ep is not destroyed while the addr/port is getting read. However, if after this check: if (!(bnx2i_conn && bnx2i_conn->ep && bnx2i_conn->ep->hba)) goto out; bnx2i_conn->ep is cleared by ep_disconnect then we will oops. This patches fixes the problem by having the driver use the get_ep_param callback instead of get_conn_param. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] bnx2i: Added iSCSI text pdu support for iSCSI offloadEddie Wai2011-02-241-1/+5
| | | | | | | | | This is part of an effort to support send target discovery via the iSCSI offload path. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
* [SCSI] bnx2i: Allow ep CONNECT_FAILED condition to go through proper cleanupEddie Wai2011-02-241-1/+1
| | | | | | | | | | Allow CNIC to go through the proper cleanup procedure for an endpoint which failed to connect. Proper cleanup is necessary for the chip to reset back to the initial state for the offloaded endpoint. Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
generated by cgit (git 2.34.1) at 2025-02-24 17:07:16 +0000