aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/usb/gadget/function
Commit message (Collapse)AuthorAgeFilesLines
* usb: gadget: f_uac2: fixed EP-IN wMaxPacketSizePavel Hofman2021-10-051-4/+10
| | | | | | | | | | | | | | | | | | | | Async feedback patches broke enumeration on Windows 10 previously fixed by commit 789ea77310f0 ("usb: gadget: f_uac2: always increase endpoint max_packet_size by one audio slot"). While the existing calculation for EP OUT capture for async mode yields size+1 frame due to uac2_opts->fb_max > 0, playback side lost the +1 feature. Therefore the +1 frame addition must be re-introduced for playback. Win10 enumerates the device only when both EP IN and EP OUT max packet sizes are (at least) +1 frame. Fixes: e89bb4288378 ("usb: gadget: u_audio: add real feedback implementation") Cc: stable <stable@vger.kernel.org> Tested-by: Henrik Enquist <henrik.enquist@gmail.com> Tested-by: Jack Pham <jackp@codeaurora.org> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20210924080027.5362-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_uac2: Populate SS descriptors' wBytesPerIntervalJack Pham2021-09-141-0/+3
| | | | | | | | | | | | | | | | | | | For Isochronous endpoints, the SS companion descriptor's wBytesPerInterval field is required to reserve bus time in order to transmit the required payload during the service interval. If left at 0, the UAC2 function is unable to transact data on its playback or capture endpoints in SuperSpeed mode. Since f_uac2 currently does not support any bursting this value can be exactly equal to the calculated wMaxPacketSize. Tested with Windows 10 as a host. Fixes: f8cb3d556be3 ("usb: f_uac2: adds support for SS and SSP") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210909174811.12534-3-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: f_uac2: Add missing companion descriptor for feedback EPJack Pham2021-09-141-1/+15
| | | | | | | | | | | | | | The f_uac2 function fails to enumerate when connected in SuperSpeed due to the feedback endpoint missing the companion descriptor. Add a new ss_epin_fback_desc_comp descriptor and append it behind the ss_epin_fback_desc both in the static definition of the ss_audio_desc structure as well as its dynamic construction in setup_headers(). Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support") Cc: stable <stable@vger.kernel.org> Signed-off-by: Jack Pham <jackp@codeaurora.org> Link: https://lore.kernel.org/r/20210909174811.12534-2-jackp@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* usb: gadget: u_audio: EP-OUT bInterval in fback frequencyPavel Hofman2021-09-141-3/+10
| | | | | | | | | | | | | | | | | The patch increases the bitshift in feedback frequency calculation with EP-OUT bInterval value. Tests have revealed that Win10 and OSX UAC2 drivers require the feedback frequency to be based on the actual packet interval instead of on the USB2 microframe. Otherwise they ignore the feedback value. Linux snd-usb-audio driver detects the applied bitshift automatically. Tested-by: Henrik Enquist <henrik.enquist@gmail.com> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210906130822.12256-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-5.15-rc1' of ↵Linus Torvalds2021-09-0118-225/+2053
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.15-rc1. Nothing huge in here, just lots of constant forward progress on a number of different drivers and hardware support: - more USB 4/Thunderbolt support added - dwc3 driver updates and additions - usb gadget fixes and addtions for new types - udc gadget driver updates - host controller updates - removal of obsolete drivers - other minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (148 commits) usb: isp1760: otg control register access usb: isp1760: use the right irq status bit usb: isp1760: write to status and address register usb: isp1760: fix qtd fill length usb: isp1760: fix memory pool initialization usb: typec: tcpm: Fix spelling mistake "atleast" -> "at least" usb: dwc2: Fix spelling mistake "was't" -> "wasn't" usb: renesas_usbhs: Fix spelling mistake "faile" -> "failed" usb: host: xhci-rcar: Don't reload firmware after the completion usb: xhci-mtk: allow bandwidth table rollover usb: mtu3: fix random remote wakeup usb: mtu3: return successful suspend status usb: xhci-mtk: Do not use xhci's virt_dev in drop_endpoint usb: xhci-mtk: modify the SOF/ITP interval for mt8195 usb: xhci-mtk: add a member of num_esit usb: xhci-mtk: check boundary before check tt usb: xhci-mtk: update fs bus bandwidth by bw_budget_table usb: xhci-mtk: fix issue of out-of-bounds array access usb: xhci-mtk: support option to disable usb2 ports usb: xhci-mtk: fix use-after-free of mtk->hcd ...
| * usb: gadget: mass_storage: Remove repeated verbose license textCai Huoqing2021-08-261-30/+0
| | | | | | | | | | | | | | | | remove it because SPDX-License-Identifier is already used Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Link: https://lore.kernel.org/r/20210822043005.192-1-caihuoqing@baidu.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: gadget: f_hid: optional SETUP/SET_REPORT modeMaxim Devaev2021-08-242-33/+188
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | f_hid provides the OUT Endpoint as only way for receiving reports from the host. SETUP/SET_REPORT method is not supported, and this causes a number of compatibility problems with various host drivers, especially in the case of keyboard emulation using f_hid. - Some hosts do not support the OUT Endpoint and ignore it, so it becomes impossible for the gadget to receive a report from the host. In the case of a keyboard, the gadget loses the ability to receive the status of the LEDs. - Some BIOSes/UEFIs can't work with HID devices with the OUT Endpoint at all. This may be due to their bugs or incomplete implementation of the HID standard. For example, absolutely all Apple UEFIs can't handle the OUT Endpoint if it goes after IN Endpoint in the descriptor and require the reverse order (OUT, IN) which is a violation of the standard. Other hosts either do not initialize gadgets with a descriptor containing the OUT Endpoint completely (like some HP and DELL BIOSes and embedded firmwares like on KVM switches), or initialize them, but will not poll the IN Endpoint. This patch adds configfs option no_out_endpoint=1 to disable the OUT Endpoint and allows f_hid to receive reports from the host via SETUP/SET_REPORT. Previously, there was such a feature in f_hid, but it was replaced by the OUT Endpoint [1] in the commit 99c515005857 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT"). So this patch actually returns the removed functionality while making it optional. For backward compatibility reasons, the OUT Endpoint mode remains the default behaviour. - The OUT Endpoint mode provides the report queue and reduces USB overhead (eliminating SETUP routine) on transmitting a report from the host. - If the SETUP/SET_REPORT mode is used, there is no report queue, so the userspace will only read last report. For classic HID devices like keyboards this is not a problem, since it's intended to transmit the status of the LEDs and only the last report is important. This mode provides better compatibility with strange and buggy host drivers. Both modes passed USBCV tests. Checking with the USB protocol analyzer also confirmed that everything is working as it should and the new mode ensures operability in all of the described cases. Link: https://www.spinics.net/lists/linux-usb/msg65494.html [1] Reviewed-by: Maciej Żenczykowski <zenczykowski@gmail.com> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Maxim Devaev <mdevaev@gmail.com> Link: https://lore.kernel.org/r/20210821134004.363217-1-mdevaev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: gadget: f_uac1: fixing inconsistent indentingPavel Hofman2021-08-181-6/+6
| | | | | | | | | | | | | | | | | | | | Fixing inconsistent indenting identified by kernel test robot. Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Acked-By: Felipe Balbi <balbi@kernel.org> Link: https://lore.kernel.org/r/20210817100555.4437-1-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge 5.14-rc5 into usb-nextGreg Kroah-Hartman2021-08-091-6/+38
| |\ | | | | | | | | | | | | | | | We need the usb fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: f_uac2: remove redundant assignments to pointer i_featureColin Ian King2021-08-051-8/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Pointer i_feature is being initialized with a value and then immediately re-assigned a new value in the next statement. Fix this by replacing the the redundant initialization with the following assigned value. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210804125907.111654-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: remove useless castSalah Triki2021-08-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Remove the cast done by ERR_PTR() and PTR_ERR() since data is of type char * and fss_prepare_buffer() should returns a value of this type. Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Salah Triki <salah.triki@gmail.com> Link: https://lore.kernel.org/r/20210731171838.GA912463@pc Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: Fix inconsistent indentWei Ming Chen2021-08-051-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove whitespace and use tab as indent Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com> Link: https://lore.kernel.org/r/20210801055454.53015-1-jj251510319013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: uvc: decrease the interrupt load to a quarterMichael Grzeschik2021-07-272-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | With usb3 we handle many more requests. Decrease the interrupt load by only enabling the interrupt every quarter of the allocated requests. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> -- v1 -> v2: - edited patch description - removed extra parantheses - added a comment for the logic - using unsigned int instead of int - reinitializing req_int_count in uvcg_video_enable v2 -> v3: - Link: https://lore.kernel.org/r/20210628155311.16762-6-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: uvc: add scatter gather supportMichael Grzeschik2021-07-275-9/+106
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch adds support for scatter gather transfers. If the underlying gadgets sg_supported == true, then the videeobuf2-dma-sg is used and the encode routine maps all scatter entries to separate scatterlists for the usb gadget. When streaming 1080p with request size of 1024 times 3 bytes top shows a difference of about 6.4% CPU load applying this patch: PID USER PR NI VIRT RES %CPU %MEM TIME+ S COMMAND 64 root 0 -20 0.0m 0.0m 7.7 0.0 0:01.25 I [kworker/u5:0-uvcvideo] 83 root 0 -20 0.0m 0.0m 4.5 0.0 0:03.71 I [kworker/u5:3-uvcvideo] 307 root -51 0 0.0m 0.0m 3.8 0.0 0:01.05 S [irq/51-dwc3] vs. 64 root 0 -20 0.0m 0.0m 5.8 0.0 0:01.79 I [kworker/u5:0-uvcvideo] 306 root -51 0 0.0m 0.0m 3.2 0.0 0:01.97 S [irq/51-dwc3] 82 root 0 -20 0.0m 0.0m 0.6 0.0 0:01.86 I [kworker/u5:1-uvcvideo] Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20210628155311.16762-5-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: uvc: set v4l2_dev->dev in f_uvcMichael Grzeschik2021-07-271-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | The v4l2_dev has no corresponding device to it. We will point it to the gadget's dev. Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20210628155311.16762-4-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: uvc: make uvc_num_requests depend on gadget speedMichael Grzeschik2021-07-273-25/+47
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | While sending bigger images is possible with USB_SPEED_SUPER it is better to use more isochronous requests in flight. This patch makes the number uvc_num_requests dynamic by changing it depending on the gadget speed. Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lore.kernel.org/r/20210628155311.16762-3-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | Merge v5.14-rc3 into usb-nextGreg Kroah-Hartman2021-07-261-1/+1
| |\ \ | | | | | | | | | | | | | | | | | | | | | | | | We need the fixes in here, and this resolves a merge issue with drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | usb: gadget: f_uac1: add volume and mute supportRuslan Bilovol2021-07-212-22/+672
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds bi-directional (host->device, device->host) volume/mute support to the f_uac1 driver by adding Feature Units and interrupt endpoint. Currently only master channel is supported. Volume and mute are configurable through configfs, by default volume has -100..0 dB range with 1 dB step. Similar to existing flexible endpoints configuration, Feature Unit won't be added to the topology if both mute and volume are not enabled, also interrupt endpoint isn't added to the device if no feature unit is present Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20210712125529.76070-5-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | usb: gadget: f_uac2: add volume and mute supportRuslan Bilovol2021-07-212-62/+617
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds bi-directional (host->device, device->host) volume/mute support to the f_uac2 driver by adding Feature Units and interrupt endpoint. Currently only master channel is supported. Volume and mute are configurable through configfs, by default volume has -100..0 dB range with 1 dB step. Similar to existing flexible endpoints configuration, Feature Unit won't be added to the topology if both mute and volume are not enabled, also interrupt endpoint isn't added to the device if no feature unit is present Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20210712125529.76070-4-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | usb: gadget: u_audio: add bi-directional volume and mute supportRuslan Bilovol2021-07-212-11/+380
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | USB Audio Class 1/2 have ability to change device's volume and mute by USB Host through class-specific control requests. Device also can notify Host about volume/mute change on its side through optional interrupt endpoint. This patch adds Volume and Mute ALSA controls which can be used by user to send and receive notifications to/from the USB Host about Volume and Mute change. These params come from f_uac* so volume and mute controls will be created only if the function support and enable each explicitly Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Pavel Hofman <pavel.hofman@ivitera.com> Link: https://lore.kernel.org/r/20210712125529.76070-3-pavel.hofman@ivitera.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | usb: gadget: u_ether: fix a potential null pointer dereferenceMaciej Żenczykowski2021-07-211-2/+3
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | f_ncm tx timeout can call us with null skb to flush a pending frame. In this case skb is NULL to begin with but ceases to be null after dev->wrap() completes. In such a case in->maxpacket will be read, even though we've failed to check that 'in' is not NULL. Though I've never observed this fail in practice, however the 'flush operation' simply does not make sense with a null usb IN endpoint - there's nowhere to flush to... (note that we're the gadget/device, and IN is from the point of view of the host, so here IN actually means outbound...) Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20210701114834.884597-6-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | usb: gadget: f_ncm: ncm_wrap_ntb - move var definitions into if statementMaciej Żenczykowski2021-07-211-11/+12
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Since they're only used if there's an skb. Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20210701114834.884597-5-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | usb: gadget: f_ncm: remove spurious if statementMaciej Żenczykowski2021-07-211-3/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | the current logic is: struct sk_buff *skb2 = NULL; ... if (!skb && !ncm->skb_tx_data) return NULL; if (skb) { ... } else if (ncm->skb_tx_data) ... } return skb2; Which means that first if statement is simply not needed. Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20210701114834.884597-4-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | usb: gadget: f_ncm: remove check for NULL skb_tx_data in timer functionMaciej Żenczykowski2021-07-211-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This condition is already checked for in ncm_wrap_ntb(), except that that check is done with eth_dev->lock held (it is grabbed by eth_start_xmit). It's best to not be reaching into ncm struct without locks held. Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20210701114834.884597-3-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | usb: gadget: f_ncm: remove spurious boolean timer_stoppingMaciej Żenczykowski2021-07-211-6/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is equivalent to ncm->netdev being NULL. Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20210701114834.884597-2-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | usb: gadget: f_ncm: remove timer_force_tx fieldMaciej Żenczykowski2021-07-211-7/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | It is simply not needed. This field is equivalent to skb being NULL. Currently with the boolean set to true we call: ncm->netdev->netdev_ops->ndo_start_xmit(NULL, ncm->netdev); which calls u_ether's: eth_start_xmit(NULL, ...) which then calls: skb = dev->wrap(dev->port_usb, NULL); which calls back into f_ncm's: ncm_wrap_ntb(..., NULL) Cc: Brooke Basile <brookebasile@gmail.com> Cc: "Bryan O'Donoghue" <bryan.odonoghue@linaro.org> Cc: Felipe Balbi <balbi@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Maciej Żenczykowski <maze@google.com> Link: https://lore.kernel.org/r/20210701114834.884597-1-zenczykowski@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | Merge tag 'tty-5.15-rc1' of ↵Linus Torvalds2021-09-011-17/+19
|\ \ \ \ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the "big" set of tty/serial driver patches for 5.15-rc1 Nothing major in here at all, just some driver updates and more cleanups on old tty apis and code that needed it that includes: - tty.h cleanup of things that didn't belong in it - other tty cleanups by Jiri - driver cleanups - rs485 support added to amba-pl011 driver - dts updates - stm32 serial driver updates - other minor fixes and driver updates All have been in linux-next for a while with no reported problems" * tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits) tty: serial: uartlite: Use read_poll_timeout for a polling loop tty: serial: uartlite: Use constants in early_uartlite_putc tty: Fix data race between tiocsti() and flush_to_ldisc() serial: vt8500: Use of_device_get_match_data serial: tegra: Use of_device_get_match_data serial: 8250_ingenic: Use of_device_get_match_data tty: serial: linflexuart: Remove redundant check to simplify the code tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp tty: serial: fsl_lpuart: enable two stop bits for lpuart32 tty: serial: fsl_lpuart: fix the wrong mapbase value mxser: use semi-colons instead of commas tty: moxa: use semi-colons instead of commas tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback tty: replace in_irq() with in_hardirq() serial: sh-sci: fix break handling for sysrq serial: stm32: use devm_platform_get_and_ioremap_resource() serial: stm32: use the defined variable to simplify code Revert "arm pl011 serial: support multi-irq request" tty: serial: samsung: Add Exynos850 SoC data tty: serial: samsung: Fix driver data macros style ...
| * \ \ \ Merge 5.14-rc5 into tty-nextGreg Kroah-Hartman2021-08-092-7/+39
| |\ \ \ \ | | | |_|/ | | |/| | | | | | | | | | | | | | | | | We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | tty: drop put_tty_driverJiri Slaby2021-07-271-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | put_tty_driver() is an alias for tty_driver_kref_put(). There is no need for two exported identical functions, therefore switch all users of old put_tty_driver() to new tty_driver_kref_put() and remove the former for good. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Scott Branden <scott.branden@broadcom.com> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Lin <dtwlin@gmail.com> Cc: Johan Hovold <johan@kernel.org> Cc: Alex Elder <elder@kernel.org> Cc: Jiri Slaby <jirislaby@kernel.org> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Mathias Nyman <mathias.nyman@intel.com> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Acked-by: Alex Elder <elder@linaro.org> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210723074317.32690-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | tty: stop using alloc_tty_driverJiri Slaby2021-07-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | alloc_tty_driver was deprecated by tty_alloc_driver in commit 7f0bc6a68ed9 (TTY: pass flags to alloc_tty_driver) in 2012. I never got into eliminating alloc_tty_driver until now. So we still have two functions for allocating drivers which might be confusing. So get rid of alloc_tty_driver uses to eliminate it for good in the next patch. Note we need to switch return value checking as tty_alloc_driver uses ERR_PTR. And flags are now a parameter of tty_alloc_driver. Cc: Richard Henderson <rth@twiddle.net>(odd fixer:ALPHA PORT) Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com> Cc: Jens Taprogge <jens.taprogge@taprogge.org> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: David Sterba <dsterba@suse.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Oliver Neukum <oneukum@suse.com> Cc: Felipe Balbi <balbi@kernel.org> Cc: Johan Hovold <johan@kernel.org> Cc: Marcel Holtmann <marcel@holtmann.org> Cc: Johan Hedberg <johan.hedberg@gmail.com> Cc: Luiz Augusto von Dentz <luiz.dentz@gmail.com> Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: David Sterba <dsterba@suse.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210723074317.32690-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | | | tty: don't store semi-state into tty driversJiri Slaby2021-07-271-15/+17
| | |/ / | |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When a tty driver pointer is used as a return value of struct console's device() hook, don't store a semi-state into global variable which holds the tty driver. It could mean console::device() would return a bogus value. This is important esp. after the next patch where we switch from alloc_tty_driver to tty_alloc_driver. tty_alloc_driver returns ERR_PTR in case of error and that might have unexpected results as the code doesn't expect this. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Laurentiu Tudor <laurentiu.tudor@nxp.com> Cc: Felipe Balbi <balbi@kernel.org> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: Jiri Slaby <jslaby@suse.cz> Link: https://lore.kernel.org/r/20210723074317.32690-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | usb: gadget: u_audio: fix race condition on endpoint stopJerome Brunet2021-08-271-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the endpoint completion callback is call right after the ep_enabled flag is cleared and before usb_ep_dequeue() is call, we could do a double free on the request and the associated buffer. Fix this by clearing ep_enabled after all the endpoint requests have been dequeued. Fixes: 7de8681be2cd ("usb: gadget: u_audio: Free requests only after callback") Cc: stable <stable@vger.kernel.org> Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210827092927.366482-1-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | | usb: gadget: f_uac2: fixup feedback endpoint stopJerome Brunet2021-08-271-4/+11
| |/ / |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | When the uac2 function is stopped, there seems to be an issue reported on some platforms (Intel Merrifield at least) BUG: kernel NULL pointer dereference, address: 0000000000000008 ... RIP: 0010:dwc3_gadget_del_and_unmap_request+0x19/0xe0 ... Call Trace: dwc3_remove_requests.constprop.0+0x12f/0x170 __dwc3_gadget_ep_disable+0x7a/0x160 dwc3_gadget_ep_disable+0x3d/0xd0 usb_ep_disable+0x1c/0x70 u_audio_stop_capture+0x79/0x120 [u_audio] afunc_set_alt+0x73/0x80 [usb_f_uac2] composite_setup+0x224/0x1b90 [libcomposite] The issue happens only when the gadget is using the sync type "async", not "adaptive". This indicates that problem is coming from the feedback endpoint, which is only used with async synchronization mode. The problem is that request is freed regardless of usb_ep_dequeue(), which ends up badly if the request is not actually dequeued yet. Update the feedback endpoint free function to release the endpoint the same way it is done for the data endpoint, which takes care of the problem. Fixes: 24f779dac8f3 ("usb: gadget: f_uac2/u_audio: add feedback endpoint support") Reported-by: Ferry Toth <ftoth@exalondelft.nl> Tested-by: Ferry Toth <ftoth@exalondelft.nl> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210827075853.266912-1-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: gadget: f_hid: idle uses the highest byte for durationMaxim Devaev2021-07-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | SET_IDLE value must be shifted 8 bits to the right to get duration. This confirmed by USBCV test. Fixes: afcff6dc690e ("usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlers") Cc: stable <stable@vger.kernel.org> Signed-off-by: Maxim Devaev <mdevaev@gmail.com> Link: https://lore.kernel.org/r/20210727185800.43796-1-mdevaev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: gadget: f_hid: added GET_IDLE and SET_IDLE handlersMaxim Devaev2021-07-271-0/+18
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The USB HID standard declares mandatory support for GET_IDLE and SET_IDLE requests for Boot Keyboard. Most hosts can handle their absence, but others like some old/strange UEFIs and BIOSes consider this a critical error and refuse to work with f_hid. This primitive implementation of saving and returning idle is sufficient to meet the requirements of the standard and these devices. Acked-by: Felipe Balbi <balbi@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Maxim Devaev <mdevaev@gmail.com> Link: https://lore.kernel.org/r/20210721180351.129450-1-mdevaev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | usb: gadget: f_hid: fixed NULL pointer dereferencePhil Elwell2021-07-271-6/+20
| |/ |/| | | | | | | | | | | | | | | | | | | | | | | | | | | | | Disconnecting and reconnecting the USB cable can lead to crashes and a variety of kernel log spam. The problem was found and reproduced on the Raspberry Pi [1] and the original fix was created in Raspberry's own fork [2]. Link: https://github.com/raspberrypi/linux/issues/3870 [1] Link: https://github.com/raspberrypi/linux/commit/a6e47d5f4efbd2ea6a0b6565cd2f9b7bb217ded5 [2] Signed-off-by: Maxim Devaev <mdevaev@gmail.com> Signed-off-by: Phil Elwell <phil@raspberrypi.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210723155928.210019-1-mdevaev@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | usb: gadget: u_serial: remove WARN_ON on null portColin Ian King2021-07-211-1/+1
|/ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Loading and then unloading module g_dpgp on a VM that does not support the driver currently throws a WARN_ON message because the port has not been initialized. Removing an unused driver is a valid use-case and the WARN_ON kernel warning is a bit excessive, so remove it. Cleans up: [27654.638698] ------------[ cut here ]------------ [27654.638705] WARNING: CPU: 6 PID: 2956336 at drivers/usb/gadget/function/u_serial.c:1201 gserial_free_line+0x7c/0x90 [u_serial] [27654.638728] Modules linked in: g_dbgp(-) u_serial usb_f_tcm target_core_mod libcomposite udc_core vmw_vmci mcb i2c_nforce2 i2c_amd756 nfit cx8800 videobuf2_dma_sg videobuf2_memops videobuf2_v4l2 cx88xx tveeprom videobuf2_common videodev mc ccp hid_generic hid intel_ishtp cros_ec mc13xxx_core vfio_mdev mdev i915 i2c_algo_bit kvm ppdev parport zatm eni suni uPD98402 atm rio_scan binder_linux hwmon_vid video ipmi_devintf ipmi_msghandler zstd nls_utf8 decnet qrtr ns sctp ip6_udp_tunnel udp_tunnel fcrypt pcbc nhc_udp nhc_ipv6 nhc_routing nhc_mobility nhc_hop nhc_dest nhc_fragment 6lowpan ts_kmp dccp_ipv6 dccp_ipv4 dccp snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq_dummy snd_seq snd_seq_device xen_front_pgdir_shbuf binfmt_misc nls_iso8859_1 dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua intel_rapl_msr intel_rapl_common snd_hda_codec_generic ledtrig_audio snd_hda_codec snd_hda_core snd_hwdep snd_pcm snd_timer snd rapl soundcore joydev input_leds mac_hid serio_raw efi_pstore [27654.638880] qemu_fw_cfg sch_fq_codel msr virtio_rng autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear qxl drm_ttm_helper crct10dif_pclmul ttm drm_kms_helper syscopyarea sysfillrect sysimgblt virtio_net fb_sys_fops cec net_failover rc_core ahci psmouse drm libahci lpc_ich virtio_blk failover [last unloaded: u_ether] [27654.638949] CPU: 6 PID: 2956336 Comm: modprobe Tainted: P O 5.13.0-9-generic #9 [27654.638956] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [27654.638969] RIP: 0010:gserial_free_line+0x7c/0x90 [u_serial] [27654.638981] Code: 20 00 00 00 00 e8 74 1a ba c9 4c 89 e7 e8 8c fe ff ff 48 8b 3d 75 3b 00 00 44 89 f6 e8 3d 7c 69 c9 5b 41 5c 41 5d 41 5e 5d c3 <0f> 0b 4c 89 ef e8 4a 1a ba c9 5b 41 5c 41 5d 41 5e 5d c3 90 0f 1f [27654.638986] RSP: 0018:ffffba0b81403da0 EFLAGS: 00010246 [27654.638992] RAX: 0000000000000000 RBX: ffffffffc0eaf6a0 RCX: 0000000000000000 [27654.638996] RDX: ffff8e21c0cac8c0 RSI: 0000000000000006 RDI: ffffffffc0eaf6a0 [27654.639000] RBP: ffffba0b81403dc0 R08: ffffba0b81403de0 R09: fefefefefefefeff [27654.639003] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [27654.639006] R13: ffffffffc0eaf6a0 R14: 0000000000000000 R15: 0000000000000000 [27654.639010] FS: 00007faa1935e740(0000) GS:ffff8e223bd80000(0000) knlGS:0000000000000000 [27654.639015] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [27654.639019] CR2: 00007ffc840cd4e8 CR3: 000000000e1ac006 CR4: 0000000000370ee0 [27654.639028] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [27654.639031] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [27654.639035] Call Trace: [27654.639044] dbgp_exit+0x1c/0xa1a [g_dbgp] [27654.639054] __do_sys_delete_module.constprop.0+0x144/0x260 [27654.639066] ? call_rcu+0xe/0x10 [27654.639073] __x64_sys_delete_module+0x12/0x20 [27654.639081] do_syscall_64+0x61/0xb0 [27654.639092] ? exit_to_user_mode_loop+0xec/0x160 [27654.639098] ? exit_to_user_mode_prepare+0x37/0xb0 [27654.639104] ? syscall_exit_to_user_mode+0x27/0x50 [27654.639110] ? __x64_sys_close+0x12/0x40 [27654.639119] ? do_syscall_64+0x6e/0xb0 [27654.639126] ? exit_to_user_mode_prepare+0x37/0xb0 [27654.639132] ? syscall_exit_to_user_mode+0x27/0x50 [27654.639137] ? __x64_sys_newfstatat+0x1e/0x20 [27654.639146] ? do_syscall_64+0x6e/0xb0 [27654.639154] ? exc_page_fault+0x8f/0x170 [27654.639159] ? asm_exc_page_fault+0x8/0x30 [27654.639166] entry_SYSCALL_64_after_hwframe+0x44/0xae [27654.639173] RIP: 0033:0x7faa194a4b2b [27654.639179] Code: 73 01 c3 48 8b 0d 3d 73 0c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 0d 73 0c 00 f7 d8 64 89 01 48 [27654.639185] RSP: 002b:00007ffc840d0578 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [27654.639191] RAX: ffffffffffffffda RBX: 000056060f9f4e70 RCX: 00007faa194a4b2b [27654.639194] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 000056060f9f4ed8 [27654.639197] RBP: 000056060f9f4e70 R08: 0000000000000000 R09: 0000000000000000 [27654.639200] R10: 00007faa1951eac0 R11: 0000000000000206 R12: 000056060f9f4ed8 [27654.639203] R13: 0000000000000000 R14: 000056060f9f4ed8 R15: 00007ffc840d06c8 [27654.639219] ---[ end trace 8dd0ea0bb32ce94a ]--- Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210701144305.110078-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* Merge tag 'usb-5.14-rc1' of ↵Linus Torvalds2021-07-0511-56/+457
|\ | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB / Thunderbolt updates from Greg KH: "Here is the big set of USB and Thunderbolt patches for 5.14-rc1. Nothing major here just lots of little changes for new hardware and features. Highlights are: - more USB 4 support added to the thunderbolt core - build warning fixes all over the place - usb-serial driver updates and new device support - mtu3 driver updates - gadget driver updates - dwc3 driver updates - dwc2 driver updates - isp1760 host driver updates - musb driver updates - lots of other tiny things. Full details are in the shortlog. All of these have been in linux-next for a while now with no reported issues" * tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits) phy: qcom-qusb2: Add configuration for SM4250 and SM6115 dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250 USB: cdc-acm: blacklist Heimann USB Appset device usb: xhci-mtk: allow multiple Start-Split in a microframe usb: ftdi-elan: remove redundant continue statement in a while-loop usb: class: cdc-wdm: return the correct errno code xhci: remove redundant continue statement usb: dwc3: Fix debugfs creation flow usb: gadget: hid: fix error return code in hid_bind() usb: gadget: eem: fix echo command packet response issue usb: gadget: f_hid: fix endianness issue with descriptors Revert "USB: misc: Add onboard_usb_hub driver" Revert "of/platform: Add stubs for of_platform_device_create/destroy()" Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()" Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub" xhci: solve a double free problem while doing s4 xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES ...
| * usb: gadget: eem: fix echo command packet response issueLinyu Yuan2021-06-211-4/+39
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | when receive eem echo command, it will send a response, but queue this response to the usb request which allocate from gadget device endpoint zero, and transmit the request to IN endpoint of eem interface. on dwc3 gadget, it will trigger following warning in function __dwc3_gadget_ep_queue(), if (WARN(req->dep != dep, "request %pK belongs to '%s'\n", &req->request, req->dep->name)) return -EINVAL; fix it by allocating a usb request from IN endpoint of eem interface, and transmit the usb request to same IN endpoint of eem interface. Signed-off-by: Linyu Yuan <linyyuan@codeaurora.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210616115142.34075-1-linyyuan@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * usb: gadget: f_hid: fix endianness issue with descriptorsRuslan Bilovol2021-06-211-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Running sparse checker it shows warning message about incorrect endianness used for descriptor initialization: | f_hid.c:91:43: warning: incorrect type in initializer (different base types) | f_hid.c:91:43: expected restricted __le16 [usertype] bcdHID | f_hid.c:91:43: got int Fixing issue with cpu_to_le16() macro, however this is not a real issue as the value is the same both endians. Cc: Fabien Chouteau <fabien.chouteau@barco.com> Cc: Segiy Stetsyuk <serg_stetsuk@ukr.net> Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Link: https://lore.kernel.org/r/20210617162755.29676-1-ruslan.bilovol@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * Merge tag 'v5.13-rc6' into usb-nextGreg Kroah-Hartman2021-06-1412-17/+24
| |\ | | | | | | | | | | | | | | | | | | | | | | | | We want the usb fixes in here as well, and this resolves some merge issues with: drivers/usb/dwc3/debugfs.c drivers/usb/dwc3/gadget.c Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: u_audio: add real feedback implementationRuslan Bilovol2021-06-094-10/+134
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This adds interface between userspace and feedback endpoint to report real feedback frequency to the Host. Current implementation adds new userspace interface ALSA mixer control "Capture Pitch 1000000" (similar to aloop driver's "PCM Rate Shift 100000" mixer control) Value in PPM is chosen to have correction value agnostic of the actual HW rate, which the application is not necessarily dealing with, while still retaining a good enough precision to allow smooth clock correction on the playback side, if necessary. Similar to sound/usb/endpoint.c, a slow down is allowed up to 25%. This has no impact on the required bandwidth. Speedup correction has an impact on the bandwidth reserved for the isochronous endpoint. The default allowed speedup is 500ppm. This seems to be more than enough but, if necessary, this is configurable through a module parameter. The reserved bandwidth is rounded up to the next packet size. Usage of this new control is easy to implement in existing userspace tools like alsaloop from alsa-utils. Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210603220104.1216001-4-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: f_uac2: add adaptive sync support for captureRuslan Bilovol2021-06-092-9/+93
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Current f_uac2 USB OUT (aka 'capture') synchronization implements 'ASYNC' scenario which means USB Gadget has it's own freerunning clock and can update Host about real clock frequency through feedback endpoint so Host can align number of samples sent to the USB gadget to prevent overruns/underruns In case if Gadget can has no it's internal clock and can consume audio samples at any rate (for example, on the Gadget side someone records audio directly to a file, or audio samples are played through an external DAC as soon as they arrive), UAC2 spec suggests 'ADAPTIVE' synchronization type. Change UAC2 driver to make it configurable through additional 'c_sync' configfs file. Default remains 'asynchronous' with possibility to switch it to 'adaptive' Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210603220104.1216001-3-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: f_uac2/u_audio: add feedback endpoint supportRuslan Bilovol2021-06-093-3/+168
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | As per USB and UAC2 specs, asynchronous audio sink endpoint requires explicit synchronization mechanism (Isochronous Feedback Endpoint) Implement feedback companion endpoint for ISO OUT endpoint This patch adds all required infrastructure and USB requests handling for feedback endpoint. Syncrhonization itself is still dummy (feedback ep always reports 'nomimal frequency' e.g. no adjustement is needed). This satisfies hosts that require feedback endpoint (like Win10) and poll it periodically Actual synchronization mechanism should be implemented separately Signed-off-by: Ruslan Bilovol <ruslan.bilovol@gmail.com> Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210603220104.1216001-2-jbrunet@baylibre.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: f_fs: Fix setting of device and driver data cross-referencesAndrew Gabbasov2021-06-091-33/+32
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | FunctionFS device structure 'struct ffs_dev' and driver data structure 'struct ffs_data' are bound to each other with cross-reference pointers 'ffs_data->private_data' and 'ffs_dev->ffs_data'. While the first one is supposed to be valid through the whole life of 'struct ffs_data' (and while 'struct ffs_dev' exists non-freed), the second one is cleared in 'ffs_closed()' (called from 'ffs_data_reset()' or the last 'ffs_data_put()'). This can be called several times, alternating in different order with 'ffs_free_inst()', that, if possible, clears the other cross-reference. As a result, different cases of these calls order may leave stale cross-reference pointers, used when the pointed structure is already freed. Even if it occasionally doesn't cause kernel crash, this error is reported by KASAN-enabled kernel configuration. For example, the case [last 'ffs_data_put()' - 'ffs_free_inst()'] was fixed by commit cdafb6d8b8da ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst"). The other case ['ffs_data_reset()' - 'ffs_free_inst()' - 'ffs_data_put()'] now causes KASAN reported error [1], when 'ffs_data_reset()' clears 'ffs_dev->ffs_data', then 'ffs_free_inst()' frees the 'struct ffs_dev', but can't clear 'ffs_data->private_data', which is then accessed in 'ffs_closed()' called from 'ffs_data_put()'. This happens since 'ffs_dev->ffs_data' reference is cleared too early. Moreover, one more use case, when 'ffs_free_inst()' is called immediately after mounting FunctionFS device (that is before the descriptors are written and 'ffs_ready()' is called), and then 'ffs_data_reset()' or 'ffs_data_put()' is called from accessing "ep0" file or unmounting the device. This causes KASAN error report like [2], since 'ffs_dev->ffs_data' is not yet set when 'ffs_free_inst()' can't properly clear 'ffs_data->private_data', that is later accessed to freed structure. Fix these (and may be other) cases of stale pointers access by moving setting and clearing of the mentioned cross-references to the single places, setting both of them when 'struct ffs_data' is created and bound to 'struct ffs_dev', and clearing both of them when one of the structures is destroyed. It seems convenient to make this pointer initialization and structures binding in 'ffs_acquire_dev()' and make pointers clearing in 'ffs_release_dev()'. This required some changes in these functions parameters and return types. Also, 'ffs_release_dev()' calling requires some cleanup, fixing minor issues, like (1) 'ffs_release_dev()' is not called if 'ffs_free_inst()' is called without unmounting the device, and "release_dev" callback is not called at all, or (2) "release_dev" callback is called before "ffs_closed" callback on unmounting, which seems to be not correctly nested with "acquire_dev" and "ffs_ready" callbacks. Make this cleanup togther with other mentioned 'ffs_release_dev()' changes. [1] ================================================================== root@rcar-gen3:~# mkdir /dev/cfs root@rcar-gen3:~# mkdir /dev/ffs root@rcar-gen3:~# modprobe libcomposite root@rcar-gen3:~# mount -t configfs none /dev/cfs root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1 root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 64.340664] file system registered root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs root@rcar-gen3:~# cd /dev/ffs root@rcar-gen3:/dev/ffs# /home/root/ffs-test ffs-test: info: ep0: writing descriptors (in v2 format) [ 83.181442] read descriptors [ 83.186085] read strings ffs-test: info: ep0: writing strings ffs-test: dbg: ep1: starting ffs-test: dbg: ep2: starting ffs-test: info: ep1: starts ffs-test: info: ep2: starts ffs-test: info: ep0: starts ^C root@rcar-gen3:/dev/ffs# cd /home/root/ root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 98.935061] unloading root@rcar-gen3:~# umount /dev/ffs [ 102.734301] ================================================================== [ 102.742059] BUG: KASAN: use-after-free in ffs_release_dev+0x64/0xa8 [usb_f_fs] [ 102.749683] Write of size 1 at addr ffff0004d46ff549 by task umount/2997 [ 102.756709] [ 102.758311] CPU: 0 PID: 2997 Comm: umount Not tainted 5.13.0-rc4+ #8 [ 102.764971] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 102.772179] Call trace: [ 102.774779] dump_backtrace+0x0/0x330 [ 102.778653] show_stack+0x20/0x2c [ 102.782152] dump_stack+0x11c/0x1ac [ 102.785833] print_address_description.constprop.0+0x30/0x274 [ 102.791862] kasan_report+0x14c/0x1c8 [ 102.795719] __asan_report_store1_noabort+0x34/0x58 [ 102.800840] ffs_release_dev+0x64/0xa8 [usb_f_fs] [ 102.805801] ffs_fs_kill_sb+0x50/0x84 [usb_f_fs] [ 102.810663] deactivate_locked_super+0xa0/0xf0 [ 102.815339] deactivate_super+0x98/0xac [ 102.819378] cleanup_mnt+0xd0/0x1b0 [ 102.823057] __cleanup_mnt+0x1c/0x28 [ 102.826823] task_work_run+0x104/0x180 [ 102.830774] do_notify_resume+0x458/0x14e0 [ 102.835083] work_pending+0xc/0x5f8 [ 102.838762] [ 102.840357] Allocated by task 2988: [ 102.844032] kasan_save_stack+0x28/0x58 [ 102.848071] kasan_set_track+0x28/0x3c [ 102.852016] ____kasan_kmalloc+0x84/0x9c [ 102.856142] __kasan_kmalloc+0x10/0x1c [ 102.860088] __kmalloc+0x214/0x2f8 [ 102.863678] kzalloc.constprop.0+0x14/0x20 [usb_f_fs] [ 102.868990] ffs_alloc_inst+0x8c/0x208 [usb_f_fs] [ 102.873942] try_get_usb_function_instance+0xf0/0x164 [libcomposite] [ 102.880629] usb_get_function_instance+0x64/0x68 [libcomposite] [ 102.886858] function_make+0x128/0x1ec [libcomposite] [ 102.892185] configfs_mkdir+0x330/0x590 [configfs] [ 102.897245] vfs_mkdir+0x12c/0x1bc [ 102.900835] do_mkdirat+0x180/0x1d0 [ 102.904513] __arm64_sys_mkdirat+0x80/0x94 [ 102.908822] invoke_syscall+0xf8/0x25c [ 102.912772] el0_svc_common.constprop.0+0x150/0x1a0 [ 102.917891] do_el0_svc+0xa0/0xd4 [ 102.921386] el0_svc+0x24/0x34 [ 102.924613] el0_sync_handler+0xcc/0x154 [ 102.928743] el0_sync+0x198/0x1c0 [ 102.932238] [ 102.933832] Freed by task 2996: [ 102.937144] kasan_save_stack+0x28/0x58 [ 102.941181] kasan_set_track+0x28/0x3c [ 102.945128] kasan_set_free_info+0x28/0x4c [ 102.949435] ____kasan_slab_free+0x104/0x118 [ 102.953921] __kasan_slab_free+0x18/0x24 [ 102.958047] slab_free_freelist_hook+0x148/0x1f0 [ 102.962897] kfree+0x318/0x440 [ 102.966123] ffs_free_inst+0x164/0x2d8 [usb_f_fs] [ 102.971075] usb_put_function_instance+0x84/0xa4 [libcomposite] [ 102.977302] ffs_attr_release+0x18/0x24 [usb_f_fs] [ 102.982344] config_item_put+0x140/0x1a4 [configfs] [ 102.987486] configfs_rmdir+0x3fc/0x518 [configfs] [ 102.992535] vfs_rmdir+0x114/0x234 [ 102.996122] do_rmdir+0x274/0x2b0 [ 102.999617] __arm64_sys_unlinkat+0x94/0xc8 [ 103.004015] invoke_syscall+0xf8/0x25c [ 103.007961] el0_svc_common.constprop.0+0x150/0x1a0 [ 103.013080] do_el0_svc+0xa0/0xd4 [ 103.016575] el0_svc+0x24/0x34 [ 103.019801] el0_sync_handler+0xcc/0x154 [ 103.023930] el0_sync+0x198/0x1c0 [ 103.027426] [ 103.029020] The buggy address belongs to the object at ffff0004d46ff500 [ 103.029020] which belongs to the cache kmalloc-128 of size 128 [ 103.042079] The buggy address is located 73 bytes inside of [ 103.042079] 128-byte region [ffff0004d46ff500, ffff0004d46ff580) [ 103.054236] The buggy address belongs to the page: [ 103.059262] page:0000000021aa849b refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff0004d46fee00 pfn:0x5146fe [ 103.070437] head:0000000021aa849b order:1 compound_mapcount:0 [ 103.076456] flags: 0x8000000000010200(slab|head|zone=2) [ 103.081948] raw: 8000000000010200 fffffc0013521a80 0000000d0000000d ffff0004c0002300 [ 103.090052] raw: ffff0004d46fee00 000000008020001e 00000001ffffffff 0000000000000000 [ 103.098150] page dumped because: kasan: bad access detected [ 103.103985] [ 103.105578] Memory state around the buggy address: [ 103.110602] ffff0004d46ff400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 103.118161] ffff0004d46ff480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 103.125726] >ffff0004d46ff500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 103.133284] ^ [ 103.139120] ffff0004d46ff580: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 103.146679] ffff0004d46ff600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 103.154238] ================================================================== [ 103.161792] Disabling lock debugging due to kernel taint [ 103.167319] Unable to handle kernel paging request at virtual address 0037801d6000018e [ 103.175406] Mem abort info: [ 103.178457] ESR = 0x96000004 [ 103.181609] EC = 0x25: DABT (current EL), IL = 32 bits [ 103.187020] SET = 0, FnV = 0 [ 103.190185] EA = 0, S1PTW = 0 [ 103.193417] Data abort info: [ 103.196385] ISV = 0, ISS = 0x00000004 [ 103.200315] CM = 0, WnR = 0 [ 103.203366] [0037801d6000018e] address between user and kernel address ranges [ 103.210611] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 103.216231] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk sata_rc4 [ 103.259233] CPU: 0 PID: 2997 Comm: umount Tainted: G B 5.13.0-rc4+ #8 [ 103.267031] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 103.273951] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--) [ 103.280001] pc : ffs_data_clear+0x138/0x370 [usb_f_fs] [ 103.285197] lr : ffs_data_clear+0x124/0x370 [usb_f_fs] [ 103.290385] sp : ffff800014777a80 [ 103.293725] x29: ffff800014777a80 x28: ffff0004d7649c80 x27: 0000000000000000 [ 103.300931] x26: ffff800014777fb0 x25: ffff60009aec9394 x24: ffff0004d7649ca4 [ 103.308136] x23: 1fffe0009a3d063a x22: dfff800000000000 x21: ffff0004d1e831d0 [ 103.315340] x20: e1c000eb00000bb4 x19: ffff0004d1e83000 x18: 0000000000000000 [ 103.322545] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 103.329748] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000012ef658 [ 103.336952] x11: ffff7000012ef658 x10: 0720072007200720 x9 : ffff800011322648 [ 103.344157] x8 : ffff800014777818 x7 : ffff80000977b2c7 x6 : 0000000000000000 [ 103.351359] x5 : 0000000000000001 x4 : ffff7000012ef659 x3 : 0000000000000001 [ 103.358562] x2 : 0000000000000000 x1 : 1c38001d6000018e x0 : e1c000eb00000c70 [ 103.365766] Call trace: [ 103.368235] ffs_data_clear+0x138/0x370 [usb_f_fs] [ 103.373076] ffs_data_reset+0x20/0x304 [usb_f_fs] [ 103.377829] ffs_data_closed+0x1ec/0x244 [usb_f_fs] [ 103.382755] ffs_fs_kill_sb+0x70/0x84 [usb_f_fs] [ 103.387420] deactivate_locked_super+0xa0/0xf0 [ 103.391905] deactivate_super+0x98/0xac [ 103.395776] cleanup_mnt+0xd0/0x1b0 [ 103.399299] __cleanup_mnt+0x1c/0x28 [ 103.402906] task_work_run+0x104/0x180 [ 103.406691] do_notify_resume+0x458/0x14e0 [ 103.410823] work_pending+0xc/0x5f8 [ 103.414351] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821) [ 103.420490] ---[ end trace 57b43a50e8244f57 ]--- Segmentation fault root@rcar-gen3:~# ================================================================== [2] ================================================================== root@rcar-gen3:~# mkdir /dev/ffs root@rcar-gen3:~# modprobe libcomposite root@rcar-gen3:~# root@rcar-gen3:~# mount -t configfs none /dev/cfs root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1 root@rcar-gen3:~# mkdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 54.766480] file system registered root@rcar-gen3:~# mount -t functionfs ffs /dev/ffs root@rcar-gen3:~# rmdir /dev/cfs/usb_gadget/g1/functions/ffs.ffs [ 63.197597] unloading root@rcar-gen3:~# cat /dev/ffs/ep0 cat: read error:[ 67.213506] ================================================================== [ 67.222095] BUG: KASAN: use-after-free in ffs_data_clear+0x70/0x370 [usb_f_fs] [ 67.229699] Write of size 1 at addr ffff0004c26e974a by task cat/2994 [ 67.236446] [ 67.238045] CPU: 0 PID: 2994 Comm: cat Not tainted 5.13.0-rc4+ #8 [ 67.244431] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 67.251624] Call trace: [ 67.254212] dump_backtrace+0x0/0x330 [ 67.258081] show_stack+0x20/0x2c [ 67.261579] dump_stack+0x11c/0x1ac [ 67.265260] print_address_description.constprop.0+0x30/0x274 [ 67.271286] kasan_report+0x14c/0x1c8 [ 67.275143] __asan_report_store1_noabort+0x34/0x58 [ 67.280265] ffs_data_clear+0x70/0x370 [usb_f_fs] [ 67.285220] ffs_data_reset+0x20/0x304 [usb_f_fs] [ 67.290172] ffs_data_closed+0x240/0x244 [usb_f_fs] [ 67.295305] ffs_ep0_release+0x40/0x54 [usb_f_fs] [ 67.300256] __fput+0x304/0x580 [ 67.303576] ____fput+0x18/0x24 [ 67.306893] task_work_run+0x104/0x180 [ 67.310846] do_notify_resume+0x458/0x14e0 [ 67.315154] work_pending+0xc/0x5f8 [ 67.318834] [ 67.320429] Allocated by task 2988: [ 67.324105] kasan_save_stack+0x28/0x58 [ 67.328144] kasan_set_track+0x28/0x3c [ 67.332090] ____kasan_kmalloc+0x84/0x9c [ 67.336217] __kasan_kmalloc+0x10/0x1c [ 67.340163] __kmalloc+0x214/0x2f8 [ 67.343754] kzalloc.constprop.0+0x14/0x20 [usb_f_fs] [ 67.349066] ffs_alloc_inst+0x8c/0x208 [usb_f_fs] [ 67.354017] try_get_usb_function_instance+0xf0/0x164 [libcomposite] [ 67.360705] usb_get_function_instance+0x64/0x68 [libcomposite] [ 67.366934] function_make+0x128/0x1ec [libcomposite] [ 67.372260] configfs_mkdir+0x330/0x590 [configfs] [ 67.377320] vfs_mkdir+0x12c/0x1bc [ 67.380911] do_mkdirat+0x180/0x1d0 [ 67.384589] __arm64_sys_mkdirat+0x80/0x94 [ 67.388899] invoke_syscall+0xf8/0x25c [ 67.392850] el0_svc_common.constprop.0+0x150/0x1a0 [ 67.397969] do_el0_svc+0xa0/0xd4 [ 67.401464] el0_svc+0x24/0x34 [ 67.404691] el0_sync_handler+0xcc/0x154 [ 67.408819] el0_sync+0x198/0x1c0 [ 67.412315] [ 67.413909] Freed by task 2993: [ 67.417220] kasan_save_stack+0x28/0x58 [ 67.421257] kasan_set_track+0x28/0x3c [ 67.425204] kasan_set_free_info+0x28/0x4c [ 67.429513] ____kasan_slab_free+0x104/0x118 [ 67.434001] __kasan_slab_free+0x18/0x24 [ 67.438128] slab_free_freelist_hook+0x148/0x1f0 [ 67.442978] kfree+0x318/0x440 [ 67.446205] ffs_free_inst+0x164/0x2d8 [usb_f_fs] [ 67.451156] usb_put_function_instance+0x84/0xa4 [libcomposite] [ 67.457385] ffs_attr_release+0x18/0x24 [usb_f_fs] [ 67.462428] config_item_put+0x140/0x1a4 [configfs] [ 67.467570] configfs_rmdir+0x3fc/0x518 [configfs] [ 67.472626] vfs_rmdir+0x114/0x234 [ 67.476215] do_rmdir+0x274/0x2b0 [ 67.479710] __arm64_sys_unlinkat+0x94/0xc8 [ 67.484108] invoke_syscall+0xf8/0x25c [ 67.488055] el0_svc_common.constprop.0+0x150/0x1a0 [ 67.493175] do_el0_svc+0xa0/0xd4 [ 67.496671] el0_svc+0x24/0x34 [ 67.499896] el0_sync_handler+0xcc/0x154 [ 67.504024] el0_sync+0x198/0x1c0 [ 67.507520] [ 67.509114] The buggy address belongs to the object at ffff0004c26e9700 [ 67.509114] which belongs to the cache kmalloc-128 of size 128 [ 67.522171] The buggy address is located 74 bytes inside of [ 67.522171] 128-byte region [ffff0004c26e9700, ffff0004c26e9780) [ 67.534328] The buggy address belongs to the page: [ 67.539355] page:000000003177a217 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x5026e8 [ 67.549175] head:000000003177a217 order:1 compound_mapcount:0 [ 67.555195] flags: 0x8000000000010200(slab|head|zone=2) [ 67.560687] raw: 8000000000010200 fffffc0013037100 0000000c00000002 ffff0004c0002300 [ 67.568791] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 67.576890] page dumped because: kasan: bad access detected [ 67.582725] [ 67.584318] Memory state around the buggy address: [ 67.589343] ffff0004c26e9600: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 67.596903] ffff0004c26e9680: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 67.604463] >ffff0004c26e9700: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 67.612022] ^ [ 67.617860] ffff0004c26e9780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 67.625421] ffff0004c26e9800: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 67.632981] ================================================================== [ 67.640535] Disabling lock debugging due to kernel taint File descriptor[ 67.646100] Unable to handle kernel paging request at virtual address fabb801d4000018d in bad state [ 67.655456] Mem abort info: [ 67.659619] ESR = 0x96000004 [ 67.662801] EC = 0x25: DABT (current EL), IL = 32 bits [ 67.668225] SET = 0, FnV = 0 [ 67.671375] EA = 0, S1PTW = 0 [ 67.674613] Data abort info: [ 67.677587] ISV = 0, ISS = 0x00000004 [ 67.681522] CM = 0, WnR = 0 [ 67.684588] [fabb801d4000018d] address between user and kernel address ranges [ 67.691849] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 67.697470] Modules linked in: usb_f_fs libcomposite configfs ath9k_htc led_class mac80211 libarc4 ath9k_common ath9k_hw ath cfg80211 aes_ce_blk crypto_simd cryptd aes_ce_cipher ghash_ce gf128mul sha2_ce sha1_ce evdev sata_rcar libata xhci_plat_hcd scsi_mod xhci_hcd rene4 [ 67.740467] CPU: 0 PID: 2994 Comm: cat Tainted: G B 5.13.0-rc4+ #8 [ 67.748005] Hardware name: Renesas Salvator-X board based on r8a77951 (DT) [ 67.754924] pstate: 00000005 (nzcv daif -PAN -UAO -TCO BTYPE=--) [ 67.760974] pc : ffs_data_clear+0x138/0x370 [usb_f_fs] [ 67.766178] lr : ffs_data_clear+0x124/0x370 [usb_f_fs] [ 67.771365] sp : ffff800014767ad0 [ 67.774706] x29: ffff800014767ad0 x28: ffff800009cf91c0 x27: ffff0004c54861a0 [ 67.781913] x26: ffff0004dc90b288 x25: 1fffe00099ec10f5 x24: 00000000000a801d [ 67.789118] x23: 1fffe00099f6953a x22: dfff800000000000 x21: ffff0004cfb4a9d0 [ 67.796322] x20: d5e000ea00000bb1 x19: ffff0004cfb4a800 x18: 0000000000000000 [ 67.803526] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 67.810730] x14: 0720072007200720 x13: 0720072007200720 x12: 1ffff000028ecefa [ 67.817934] x11: ffff7000028ecefa x10: 0720072007200720 x9 : ffff80001132c014 [ 67.825137] x8 : ffff8000147677d8 x7 : ffff8000147677d7 x6 : 0000000000000000 [ 67.832341] x5 : 0000000000000001 x4 : ffff7000028ecefb x3 : 0000000000000001 [ 67.839544] x2 : 0000000000000005 x1 : 1abc001d4000018d x0 : d5e000ea00000c6d [ 67.846748] Call trace: [ 67.849218] ffs_data_clear+0x138/0x370 [usb_f_fs] [ 67.854058] ffs_data_reset+0x20/0x304 [usb_f_fs] [ 67.858810] ffs_data_closed+0x240/0x244 [usb_f_fs] [ 67.863736] ffs_ep0_release+0x40/0x54 [usb_f_fs] [ 67.868488] __fput+0x304/0x580 [ 67.871665] ____fput+0x18/0x24 [ 67.874837] task_work_run+0x104/0x180 [ 67.878622] do_notify_resume+0x458/0x14e0 [ 67.882754] work_pending+0xc/0x5f8 [ 67.886282] Code: b4000a54 9102f280 12000802 d343fc01 (38f66821) [ 67.892422] ---[ end trace 6d7cedf53d7abbea ]--- Segmentation fault root@rcar-gen3:~# ================================================================== Fixes: 4b187fceec3c ("usb: gadget: FunctionFS: add devices management code") Fixes: 3262ad824307 ("usb: gadget: f_fs: Stop ffs_closed NULL pointer dereference") Fixes: cdafb6d8b8da ("usb: gadget: f_fs: Fix use-after-free in ffs_free_inst") Reported-by: Bhuvanesh Surachari <bhuvanesh_surachari@mentor.com> Tested-by: Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Link: https://lore.kernel.org/r/20210603171507.22514-1-andrew_gabbasov@mentor.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: function: printer: use list_move instead of list_del/list_addBaokun Li2021-06-091-2/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Using list_move() instead of list_del() + list_add(). Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20210609070612.1325044-1-libaokun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: function: Fix inconsistent indentWei Ming Chen2021-05-102-4/+4
| | | | | | | | | | | | | | | | | | | | | | | | | | | Remove whitespace before variable Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com> Link: https://lore.kernel.org/r/20210503160927.6482-1-jj251510319013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: Drop unnecessary NULL checks after container_ofGuenter Roeck2021-05-101-5/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The parameters passed to allow_link and drop_link functions are never NULL. That means the result of container_of() on those parameters is also never NULL, even though the reference into the structure points to the first element of the structure. Remove the unnecessary NULL checks. This change was made automatically with the following Coccinelle script. A now obsolete 'out:' label was removed manually. @@ type t; identifier v; statement s; @@ <+... ( t v = container_of(...); | v = container_of(...); ) ... when != v - if (\( !v \| v == NULL \) ) s ...+> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Felipe Balbi <balbi@kernel.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210424145443.170413-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| * | usb: gadget: function: fix typo in f_hid.cWei Ming Chen2021-05-101-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | Replace `me` with `be` Acked-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Wei Ming Chen <jj251510319013@gmail.com> Link: https://lore.kernel.org/r/20210423132417.4385-1-jj251510319013@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* | | Merge tag 'v5.13-rc6' into tty-nextGreg Kroah-Hartman2021-06-1412-17/+24
|\ \ \ | | |/ | |/| | | | | | | | | | We want the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit (git 2.34.1) at 2025-03-01 10:09:06 +0000